Audio webcam

I recntly purchased the Creative webcam live. I have no problems with installation except thing. I have no audio playback in my videos. Anyone able to help here? Why cant hear any sound in my videos?
Are their any types of sound drivers that Creative would not configure with? My sound drivers are built ib to the mother board so I dont need a sound card. Could this be the problem?
Any help would be appreciated
Liz

Liz,
You need to enable Audio recording for video. See this Knowledgebase article SID7035.
Jason

Similar Messages

Lync 2010 Voice & Video Support on Windows 2012 R2 SP1 RDSH & RDVH

Hello - We have successfully demonstrated RDSH & RDVH using Windows 2012 R2, Windows 8 virtual desktops and Dell T10 Zero clients. RemoteFX has been successfully tested as well for Printing across RDSH & RDVH environments.
Problem at hand is that we are unable to showcase Lync 2010 Voice & Video calling across both these environments (RDSH & RDVH).
RDSH Environment
In an RDSH environment, we observe that a Platronics headset connected to the Dell T10 thin client is able to get redirected to the RDSH Server using RemoteFX and in-turn the RDSH Server is able to detect the connected hardware. However, the Lync 2010 client,
published using RDSH, is UNABLE to detect the connected audio device.
As for Logitech Webcam connected to the Dell T10 thin client, we have no issues with device detection and the Lync 2010 client is able to see the connected Webcam device.
RDVH Environment (Pooled Desktop)
As for the RDVH environment, we observe that both the Platronics headset & Logitec Webcam connected to the the Dell T10 thin client are UNABLE to get redirected to the RDVH Server using RemoteFX. We have enabled RemoteFX via Group policy in this environment.
Queries:
A. Could you help providing some direction into troubleshooting/isolating the audio-device detection issue on Lync clients in an RDSH environment.
B. Could you help providing some direction into troubleshooting/isolating the audio & webcam re-direction issue in an RDVH environment. FYI, our test bed server does NOT support GPU and wanted to check if that would be a limitation towards detection
of these devices?
Thanks
Srinath
sgopalkr

Hi Dharmesh,
Thank you for a response.
We had already enabled Audio and Video playback option.
But when we have tested with windows 7 desktop machine, the audio devices are detecting in Lync client in both RDVH and RDSH
environment and we are able to make audio calls. So we are planning to test with the different thin clients. Post we will update the same.
Thanks.
Manikandan

[solved] Radeon HD 3200 & AIGLX

Hey all, I just purchased an HP Pavilion dm3, which by the way was a hell of a deal: http://www.officemax.com/technology/com … rod2850237
The machine is very thin and light, and has been the most linux-compliant laptop I've played with.
At any rate, I've got arch up and running beautifully (after fixing HP's effed up partitioning *shakes fist*) Everything is working: Wireless, audio, webcam, suspend, hibernate, etc.
My last problem is that I'm only getting sudo GPU acceleration, and no AIGLX.
I'm running completely without an xorg.conf file (woohoo!) Here's what I'm seeing:
Xorg.0.log wrote:
This is a pre-release version of the X server from The X.Org Foundation.
It is not supported in any way.
Bugs may be filed in the bugzilla at http://bugs.freedesktop.org/.
Select the "xorg" product for bugs you find in this release.
Before reporting bugs in pre-release versions please check the
latest version in the X.Org Foundation git repository.
See http://wiki.x.org/wiki/GitPage for git access instructions.
X.Org X Server 1.7.3.902 (1.7.4 RC 2)
Release Date: 2009-12-26
X Protocol Version 11, Revision 0
Build Operating System: Linux 2.6.32-ARCH i686
Current Operating System: Linux shane-arch 2.6.32-ARCH #1 SMP PREEMPT Mon Jan 25 20:06:48 UTC 2010 i686
Kernel command line: root=/dev/disk/by-uuid/0ec557fe-c784-4c83-b129-12b05cd9a4c1 ro 5 vga=0x369 edd=off resume=/dev/sda5
Build Date: 26 December 2009 11:37:45AM
Current version of pixman: 0.16.4
Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Fri Feb 5 10:58:25 2010
(II) Loader magic: 0x81e4c60
(II) Module ABI versions:
X.Org ANSI C Emulation: 0.4
X.Org Video Driver: 6.0
X.Org XInput driver : 7.0
X.Org Server Extension : 2.0
(--) using VT number 7
(--) PCI:*(0:1:5:0) 1002:9612:103c:3656 ATI Technologies Inc RS780M/RS780MN [Radeon HD 3200 Graphics] rev 0, Mem @ 0xe0000000/268435456, 0xf2200000/65536, 0xf2100000/1048576, I/O @ 0x00006000/256
(==) Using default built-in configuration (30 lines)
(==) --- Start of built-in configuration ---
Section "Device"
Identifier "Builtin Default ati Device 0"
Driver "ati"
EndSection
Section "Screen"
Identifier "Builtin Default ati Screen 0"
Device "Builtin Default ati Device 0"
EndSection
Section "Device"
Identifier "Builtin Default vesa Device 0"
Driver "vesa"
EndSection
Section "Screen"
Identifier "Builtin Default vesa Screen 0"
Device "Builtin Default vesa Device 0"
EndSection
Section "Device"
Identifier "Builtin Default fbdev Device 0"
Driver "fbdev"
EndSection
Section "Screen"
Identifier "Builtin Default fbdev Screen 0"
Device "Builtin Default fbdev Device 0"
EndSection
Section "ServerLayout"
Identifier "Builtin Default Layout"
Screen "Builtin Default ati Screen 0"
Screen "Builtin Default vesa Screen 0"
Screen "Builtin Default fbdev Screen 0"
EndSection
(==) --- End of built-in configuration ---
(==) ServerLayout "Builtin Default Layout"
(**) |-->Screen "Builtin Default ati Screen 0" (0)
(**) | |-->Monitor "<default monitor>"
(**) | |-->Device "Builtin Default ati Device 0"
(==) No monitor specified for screen "Builtin Default ati Screen 0".
Using a default monitor configuration.
(**) |-->Screen "Builtin Default vesa Screen 0" (1)
(**) | |-->Monitor "<default monitor>"
(**) | |-->Device "Builtin Default vesa Device 0"
(==) No monitor specified for screen "Builtin Default vesa Screen 0".
Using a default monitor configuration.
(**) |-->Screen "Builtin Default fbdev Screen 0" (2)
(**) | |-->Monitor "<default monitor>"
(**) | |-->Device "Builtin Default fbdev Device 0"
(==) No monitor specified for screen "Builtin Default fbdev Screen 0".
Using a default monitor configuration.
(==) Automatically adding devices
(==) Automatically enabling devices
(==) FontPath set to:
/usr/share/fonts/misc,
/usr/share/fonts/100dpi:unscaled,
/usr/share/fonts/75dpi:unscaled,
/usr/share/fonts/TTF,
/usr/share/fonts/Type1
(==) ModulePath set to "/usr/lib/xorg/modules"
(II) Cannot locate a core pointer device.
(II) Cannot locate a core keyboard device.
(II) The server relies on HAL to provide the list of input devices.
If no devices become available, reconfigure HAL or disable AutoAddDevices.
(WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
(II) LoadModule: "extmod"
(II) Loading /usr/lib/xorg/modules/extensions/libextmod.so
(II) Module extmod: vendor="X.Org Foundation"
compiled for 1.7.3.902, module version = 1.0.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension MIT-SCREEN-SAVER
(II) Loading extension XFree86-VidModeExtension
(II) Loading extension XFree86-DGA
(II) Loading extension DPMS
(II) Loading extension XVideo
(II) Loading extension XVideo-MotionCompensation
(II) Loading extension X-Resource
(II) LoadModule: "dbe"
(II) Loading /usr/lib/xorg/modules/extensions/libdbe.so
(II) Module dbe: vendor="X.Org Foundation"
compiled for 1.7.3.902, module version = 1.0.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension DOUBLE-BUFFER
(II) LoadModule: "glx"
(II) Loading /usr/lib/xorg/modules/extensions/libglx.so
(II) Module glx: vendor="X.Org Foundation"
compiled for 1.7.3.902, module version = 1.0.0
ABI class: X.Org Server Extension, version 2.0
(==) AIGLX enabled
(II) Loading extension GLX
(II) LoadModule: "dri"
(II) Loading /usr/lib/xorg/modules/extensions/libdri.so
(II) Module dri: vendor="X.Org Foundation"
compiled for 1.7.3.902, module version = 1.0.0
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension XFree86-DRI
(II) LoadModule: "dri2"
(II) Loading /usr/lib/xorg/modules/extensions/libdri2.so
(II) Module dri2: vendor="X.Org Foundation"
compiled for 1.7.3.902, module version = 1.1.0
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension DRI2
(II) LoadModule: "ati"
(II) Loading /usr/lib/xorg/modules/drivers/ati_drv.so
(II) Module ati: vendor="X.Org Foundation"
compiled for 1.7.3.902, module version = 6.12.4
Module class: X.Org Video Driver
ABI class: X.Org Video Driver, version 6.0
(II) LoadModule: "radeon"
(II) Loading /usr/lib/xorg/modules/drivers/radeon_drv.so
(II) Module radeon: vendor="X.Org Foundation"
compiled for 1.7.3.902, module version = 6.12.4
Module class: X.Org Video Driver
ABI class: X.Org Video Driver, version 6.0
(II) LoadModule: "vesa"
(II) Loading /usr/lib/xorg/modules/drivers/vesa_drv.so
(II) Module vesa: vendor="X.Org Foundation"
compiled for 1.7.0.901, module version = 2.2.1
Module class: X.Org Video Driver
ABI class: X.Org Video Driver, version 6.0
(II) LoadModule: "fbdev"
(WW) Warning, couldn't open module fbdev
(II) UnloadModule: "fbdev"
(EE) Failed to load module "fbdev" (module does not exist, 0)
(II) RADEON: Driver for ATI Radeon chipsets:
ATI Radeon Mobility X600 (M24) 3150 (PCIE), ATI FireMV 2400 (PCI),
ATI Radeon Mobility X300 (M24) 3152 (PCIE),
ATI FireGL M24 GL 3154 (PCIE), ATI Radeon X600 (RV380) 3E50 (PCIE),
ATI FireGL V3200 (RV380) 3E54 (PCIE), ATI Radeon IGP320 (A3) 4136,
ATI Radeon IGP330/340/350 (A4) 4137, ATI Radeon 9500 AD (AGP),
ATI Radeon 9500 AE (AGP), ATI Radeon 9600TX AF (AGP),
ATI FireGL Z1 AG (AGP), ATI Radeon 9800SE AH (AGP),
ATI Radeon 9800 AI (AGP), ATI Radeon 9800 AJ (AGP),
ATI FireGL X2 AK (AGP), ATI Radeon 9600 AP (AGP),
ATI Radeon 9600SE AQ (AGP), ATI Radeon 9600XT AR (AGP),
ATI Radeon 9600 AS (AGP), ATI FireGL T2 AT (AGP), ATI Radeon 9650,
ATI FireGL RV360 AV (AGP), ATI Radeon 7000 IGP (A4+) 4237,
ATI Radeon 8500 AIW BB (AGP), ATI Radeon 8500 AIW BC (AGP),
ATI Radeon IGP320M (U1) 4336, ATI Radeon IGP330M/340M/350M (U2) 4337,
ATI Radeon Mobility 7000 IGP 4437, ATI Radeon 9000/PRO If (AGP/PCI),
ATI Radeon 9000 Ig (AGP/PCI), ATI Radeon X800 (R420) JH (AGP),
ATI Radeon X800PRO (R420) JI (AGP),
ATI Radeon X800SE (R420) JJ (AGP), ATI Radeon X800 (R420) JK (AGP),
ATI Radeon X800 (R420) JL (AGP), ATI FireGL X3 (R420) JM (AGP),
ATI Radeon Mobility 9800 (M18) JN (AGP),
ATI Radeon X800 SE (R420) (AGP), ATI Radeon X800XT (R420) JP (AGP),
ATI Radeon X800 VE (R420) JT (AGP), ATI Radeon X850 (R480) (AGP),
ATI Radeon X850 XT (R480) (AGP), ATI Radeon X850 SE (R480) (AGP),
ATI Radeon X850 PRO (R480) (AGP), ATI Radeon X850 XT PE (R480) (AGP),
ATI Radeon Mobility M7 LW (AGP),
ATI Mobility FireGL 7800 M7 LX (AGP),
ATI Radeon Mobility M6 LY (AGP), ATI Radeon Mobility M6 LZ (AGP),
ATI FireGL Mobility 9000 (M9) Ld (AGP),
ATI Radeon Mobility 9000 (M9) Lf (AGP),
ATI Radeon Mobility 9000 (M9) Lg (AGP), ATI Radeon 9700 Pro ND (AGP),
ATI Radeon 9700/9500Pro NE (AGP), ATI Radeon 9600TX NF (AGP),
ATI FireGL X1 NG (AGP), ATI Radeon 9800PRO NH (AGP),
ATI Radeon 9800 NI (AGP), ATI FireGL X2 NK (AGP),
ATI Radeon 9800XT NJ (AGP),
ATI Radeon Mobility 9600/9700 (M10/M11) NP (AGP),
ATI Radeon Mobility 9600 (M10) NQ (AGP),
ATI Radeon Mobility 9600 (M11) NR (AGP),
ATI Radeon Mobility 9600 (M10) NS (AGP),
ATI FireGL Mobility T2 (M10) NT (AGP),
ATI FireGL Mobility T2e (M11) NV (AGP), ATI Radeon QD (AGP),
ATI Radeon QE (AGP), ATI Radeon QF (AGP), ATI Radeon QG (AGP),
ATI FireGL 8700/8800 QH (AGP), ATI Radeon 8500 QL (AGP),
ATI Radeon 9100 QM (AGP), ATI Radeon 7500 QW (AGP/PCI),
ATI Radeon 7500 QX (AGP/PCI), ATI Radeon VE/7000 QY (AGP/PCI),
ATI Radeon VE/7000 QZ (AGP/PCI), ATI ES1000 515E (PCI),
ATI Radeon Mobility X300 (M22) 5460 (PCIE),
ATI Radeon Mobility X600 SE (M24C) 5462 (PCIE),
ATI FireGL M22 GL 5464 (PCIE), ATI Radeon X800 (R423) UH (PCIE),
ATI Radeon X800PRO (R423) UI (PCIE),
ATI Radeon X800LE (R423) UJ (PCIE),
ATI Radeon X800SE (R423) UK (PCIE),
ATI Radeon X800 XTP (R430) (PCIE), ATI Radeon X800 XL (R430) (PCIE),
ATI Radeon X800 SE (R430) (PCIE), ATI Radeon X800 (R430) (PCIE),
ATI FireGL V7100 (R423) (PCIE), ATI FireGL V5100 (R423) UQ (PCIE),
ATI FireGL unknown (R423) UR (PCIE),
ATI FireGL unknown (R423) UT (PCIE),
ATI Mobility FireGL V5000 (M26) (PCIE),
ATI Mobility FireGL V5000 (M26) (PCIE),
ATI Mobility Radeon X700 XL (M26) (PCIE),
ATI Mobility Radeon X700 (M26) (PCIE),
ATI Mobility Radeon X700 (M26) (PCIE),
ATI Radeon X550XTX 5657 (PCIE), ATI Radeon 9100 IGP (A5) 5834,
ATI Radeon Mobility 9100 IGP (U3) 5835,
ATI Radeon XPRESS 200 5954 (PCIE),
ATI Radeon XPRESS 200M 5955 (PCIE), ATI Radeon 9250 5960 (AGP),
ATI Radeon 9200 5961 (AGP), ATI Radeon 9200 5962 (AGP),
ATI Radeon 9200SE 5964 (AGP), ATI FireMV 2200 (PCI),
ATI ES1000 5969 (PCI), ATI Radeon XPRESS 200 5974 (PCIE),
ATI Radeon XPRESS 200M 5975 (PCIE),
ATI Radeon XPRESS 200 5A41 (PCIE),
ATI Radeon XPRESS 200M 5A42 (PCIE),
ATI Radeon XPRESS 200 5A61 (PCIE),
ATI Radeon XPRESS 200M 5A62 (PCIE),
ATI Radeon X300 (RV370) 5B60 (PCIE),
ATI Radeon X600 (RV370) 5B62 (PCIE),
ATI Radeon X550 (RV370) 5B63 (PCIE),
ATI FireGL V3100 (RV370) 5B64 (PCIE),
ATI FireMV 2200 PCIE (RV370) 5B65 (PCIE),
ATI Radeon Mobility 9200 (M9+) 5C61 (AGP),
ATI Radeon Mobility 9200 (M9+) 5C63 (AGP),
ATI Mobility Radeon X800 XT (M28) (PCIE),
ATI Mobility FireGL V5100 (M28) (PCIE),
ATI Mobility Radeon X800 (M28) (PCIE), ATI Radeon X850 5D4C (PCIE),
ATI Radeon X850 XT PE (R480) (PCIE),
ATI Radeon X850 SE (R480) (PCIE), ATI Radeon X850 PRO (R480) (PCIE),
ATI unknown Radeon / FireGL (R480) 5D50 (PCIE),
ATI Radeon X850 XT (R480) (PCIE),
ATI Radeon X800XT (R423) 5D57 (PCIE),
ATI FireGL V5000 (RV410) (PCIE), ATI Radeon X700 XT (RV410) (PCIE),
ATI Radeon X700 PRO (RV410) (PCIE),
ATI Radeon X700 SE (RV410) (PCIE), ATI Radeon X700 (RV410) (PCIE),
ATI Radeon X700 SE (RV410) (PCIE), ATI Radeon X1800,
ATI Mobility Radeon X1800 XT, ATI Mobility Radeon X1800,
ATI Mobility FireGL V7200, ATI FireGL V7200, ATI FireGL V5300,
ATI Mobility FireGL V7100, ATI Radeon X1800, ATI Radeon X1800,
ATI Radeon X1800, ATI Radeon X1800, ATI Radeon X1800,
ATI FireGL V7300, ATI FireGL V7350, ATI Radeon X1600, ATI RV505,
ATI Radeon X1300/X1550, ATI Radeon X1550, ATI M54-GL,
ATI Mobility Radeon X1400, ATI Radeon X1300/X1550,
ATI Radeon X1550 64-bit, ATI Mobility Radeon X1300,
ATI Mobility Radeon X1300, ATI Mobility Radeon X1300,
ATI Mobility Radeon X1300, ATI Radeon X1300, ATI Radeon X1300,
ATI RV505, ATI RV505, ATI FireGL V3300, ATI FireGL V3350,
ATI Radeon X1300, ATI Radeon X1550 64-bit, ATI Radeon X1300/X1550,
ATI Radeon X1600, ATI Radeon X1300/X1550, ATI Mobility Radeon X1450,
ATI Radeon X1300/X1550, ATI Mobility Radeon X2300,
ATI Mobility Radeon X2300, ATI Mobility Radeon X1350,
ATI Mobility Radeon X1350, ATI Mobility Radeon X1450,
ATI Radeon X1300, ATI Radeon X1550, ATI Mobility Radeon X1350,
ATI FireMV 2250, ATI Radeon X1550 64-bit, ATI Radeon X1600,
ATI Radeon X1650, ATI Radeon X1600, ATI Radeon X1600,
ATI Mobility FireGL V5200, ATI Mobility Radeon X1600,
ATI Radeon X1650, ATI Radeon X1650, ATI Radeon X1600,
ATI Radeon X1300 XT/X1600 Pro, ATI FireGL V3400,
ATI Mobility FireGL V5250, ATI Mobility Radeon X1700,
ATI Mobility Radeon X1700 XT, ATI FireGL V5200,
ATI Mobility Radeon X1700, ATI Radeon X2300HD,
ATI Mobility Radeon HD 2300, ATI Mobility Radeon HD 2300,
ATI Radeon X1950, ATI Radeon X1900, ATI Radeon X1950,
ATI Radeon X1900, ATI Radeon X1900, ATI Radeon X1900,
ATI Radeon X1900, ATI Radeon X1900, ATI Radeon X1900,
ATI Radeon X1900, ATI Radeon X1900, ATI Radeon X1900,
ATI AMD Stream Processor, ATI Radeon X1900, ATI Radeon X1950,
ATI RV560, ATI RV560, ATI Mobility Radeon X1900, ATI RV560,
ATI Radeon X1950 GT, ATI RV570, ATI RV570, ATI FireGL V7400,
ATI RV560, ATI Radeon X1650, ATI Radeon X1650, ATI RV560,
ATI Radeon 9100 PRO IGP 7834, ATI Radeon Mobility 9200 IGP 7835,
ATI Radeon X1200, ATI Radeon X1200, ATI Radeon X1200,
ATI Radeon X1200, ATI Radeon X1200, ATI RS740, ATI RS740M, ATI RS740,
ATI RS740M, ATI Radeon HD 2900 XT, ATI Radeon HD 2900 XT,
ATI Radeon HD 2900 XT, ATI Radeon HD 2900 Pro, ATI Radeon HD 2900 GT,
ATI FireGL V8650, ATI FireGL V8600, ATI FireGL V7600,
ATI Radeon 4800 Series, ATI Radeon HD 4870 x2,
ATI Radeon 4800 Series, ATI Radeon HD 4850 x2,
ATI FirePro V8750 (FireGL), ATI FirePro V7760 (FireGL),
ATI Mobility RADEON HD 4850, ATI Mobility RADEON HD 4850 X2,
ATI Radeon 4800 Series, ATI FirePro RV770, AMD FireStream 9270,
AMD FireStream 9250, ATI FirePro V8700 (FireGL),
ATI Mobility RADEON HD 4870, ATI Mobility RADEON M98,
ATI Radeon 4800 Series, ATI Radeon 4800 Series, ATI FirePro M7750,
ATI M98, ATI M98, ATI M98, ATI Mobility Radeon HD 4650,
ATI Radeon RV730 (AGP), ATI Mobility Radeon HD 4670,
ATI FirePro M5750, ATI Radeon RV730 (AGP),
ATI RV730XT [Radeon HD 4670], ATI RADEON E4600,
ATI Radeon HD 4600 Series, ATI RV730 PRO [Radeon HD 4650],
ATI FirePro V7750 (FireGL), ATI FirePro V5700 (FireGL),
ATI FirePro V3750 (FireGL), ATI Mobility Radeon HD 4830,
ATI Mobility Radeon HD 4850, ATI FirePro M7740, ATI RV740,
ATI Radeon HD 4770, ATI Radeon HD 4700 Series, ATI Radeon HD 4770,
ATI FirePro M5750, ATI RV610, ATI Radeon HD 2400 XT,
ATI Radeon HD 2400 Pro, ATI Radeon HD 2400 PRO AGP, ATI FireGL V4000,
ATI RV610, ATI Radeon HD 2350, ATI Mobility Radeon HD 2400 XT,
ATI Mobility Radeon HD 2400, ATI RADEON E2400, ATI RV610,
ATI FireMV 2260, ATI RV670, ATI Radeon HD3870,
ATI Mobility Radeon HD 3850, ATI Radeon HD3850,
ATI Mobility Radeon HD 3850 X2, ATI RV670,
ATI Mobility Radeon HD 3870, ATI Mobility Radeon HD 3870 X2,
ATI Radeon HD3870 X2, ATI FireGL V7700, ATI Radeon HD3850,
ATI Radeon HD3690, AMD Firestream 9170, ATI Radeon HD 4550,
ATI Radeon RV710, ATI Radeon RV710, ATI Radeon HD 4350,
ATI Mobility Radeon 4300 Series, ATI Mobility Radeon 4500 Series,
ATI Mobility Radeon 4500 Series, ATI FirePro RG220, ATI RV630,
ATI Mobility Radeon HD 2600, ATI Mobility Radeon HD 2600 XT,
ATI Radeon HD 2600 XT AGP, ATI Radeon HD 2600 Pro AGP,
ATI Radeon HD 2600 XT, ATI Radeon HD 2600 Pro, ATI Gemini RV630,
ATI Gemini Mobility Radeon HD 2600 XT, ATI FireGL V5600,
ATI FireGL V3600, ATI Radeon HD 2600 LE,
ATI Mobility FireGL Graphics Processor, ATI Radeon RV710,
ATI Radeon HD 3470, ATI Mobility Radeon HD 3430,
ATI Mobility Radeon HD 3400 Series, ATI Radeon HD 3450,
ATI Radeon HD 3450, ATI Radeon HD 3430, ATI Radeon HD 3450,
ATI FirePro V3700, ATI FireMV 2450, ATI FireMV 2260, ATI FireMV 2260,
ATI Radeon HD 3600 Series, ATI Radeon HD 3650 AGP,
ATI Radeon HD 3600 PRO, ATI Radeon HD 3600 XT,
ATI Radeon HD 3600 PRO, ATI Mobility Radeon HD 3650,
ATI Mobility Radeon HD 3670, ATI Mobility FireGL V5700,
ATI Mobility FireGL V5725, ATI Radeon HD 3200 Graphics,
ATI Radeon 3100 Graphics, ATI Radeon HD 3200 Graphics,
ATI Radeon 3100 Graphics, ATI Radeon HD 3300 Graphics,
ATI Radeon HD 3200 Graphics, ATI Radeon 3000 Graphics,
ATI Radeon HD 4200, ATI Radeon 4100, ATI Mobility Radeon HD 4200,
ATI Mobility Radeon 4100, ATI RS880
(II) VESA: driver for VESA chipsets: vesa
(II) Primary Device is: PCI 01@00:05:0
(WW) Falling back to old probe method for vesa
(II) RADEON(0): TOTO SAYS 00000000f2200000
(II) RADEON(0): MMIO registers at 0x00000000f2200000: size 64KB
(II) RADEON(0): PCI bus 1 card 5 func 0
(II) RADEON(0): Creating default Display subsection in Screen section
"Builtin Default ati Screen 0" for depth/fbbpp 24/32
(==) RADEON(0): Depth 24, (--) framebuffer bpp 32
(II) RADEON(0): Pixel depth = 24 bits stored in 4 bytes (32 bpp pixmaps)
(==) RADEON(0): Default visual is TrueColor
(II) Loading sub module "vgahw"
(II) LoadModule: "vgahw"
(II) Loading /usr/lib/xorg/modules/libvgahw.so
(II) Module vgahw: vendor="X.Org Foundation"
compiled for 1.7.3.902, module version = 0.1.0
ABI class: X.Org Video Driver, version 6.0
(II) RADEON(0): vgaHWGetIOBase: hwp->IOBase is 0x03d0, hwp->PIOOffset is 0x0000
(==) RADEON(0): RGB weight 888
(II) RADEON(0): Using 8 bits per RGB (8 bit DAC)
(--) RADEON(0): Chipset: "ATI Radeon HD 3200 Graphics" (ChipID = 0x9612)
(--) RADEON(0): Linear framebuffer at 0x00000000e0000000
(II) RADEON(0): PCI card detected
(II) Loading sub module "int10"
(II) LoadModule: "int10"
(II) Loading /usr/lib/xorg/modules/libint10.so
(II) Module int10: vendor="X.Org Foundation"
compiled for 1.7.3.902, module version = 1.0.0
ABI class: X.Org Video Driver, version 6.0
(II) RADEON(0): initializing int10
(II) RADEON(0): Primary V_BIOS segment is: 0xc000
(II) RADEON(0): ATOM BIOS detected
(II) RADEON(0): ATOM BIOS Rom:
SubsystemVendorID: 0x103c SubsystemID: 0x3656
IOBaseAddress: 0x6000
Filename: BR34990.bin
BIOS Bootup Message:
HP_Arwen RS780M DDR2 200e/500m
(II) RADEON(0): Framebuffer space used by Firmware (kb): 20
(II) RADEON(0): Start of VRAM area used by Firmware: 0x17ffb000
(II) RADEON(0): AtomBIOS requests 20kB of VRAM scratch space
(II) RADEON(0): AtomBIOS VRAM scratch base: 0x17ffb000
(II) RADEON(0): Cannot get VRAM scratch space. Allocating in main memory instead
(II) RADEON(0): Default Engine Clock: 500000
(II) RADEON(0): Default Memory Clock: 333000
(II) RADEON(0): Maximum Pixel ClockPLL Frequency Output: 1200000
(II) RADEON(0): Minimum Pixel ClockPLL Frequency Output: 0
(II) RADEON(0): Maximum Pixel ClockPLL Frequency Input: 13500
(II) RADEON(0): Minimum Pixel ClockPLL Frequency Input: 1000
(II) RADEON(0): Maximum Pixel Clock: 400000
(II) RADEON(0): Reference Clock: 14320
drmOpenDevice: node name is /dev/dri/card0
drmOpenByBusid: Searching for BusID pci:0000:01:05.0
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 10, (OK)
drmOpenByBusid: drmOpenMinor returns 10
drmOpenByBusid: drmGetBusid reports pci:0000:01:05.0
(II) RADEON(0): [dri] Found DRI library version 1.3.0 and kernel module version 1.31.0
(==) RADEON(0): Page Flipping disabled on r5xx and newer chips.
(II) RADEON(0): Will try to use DMA for Xv image transfers
(II) RADEON(0): Detected total video RAM=393216K, accessible=262144K (PCI BAR=262144K)
(--) RADEON(0): Mapped VideoRAM: 262144 kByte (128 bit DDR SDRAM)
(II) RADEON(0): Color tiling disabled
(II) Loading sub module "ddc"
(II) LoadModule: "ddc"
(II) Module "ddc" already built-in
(II) Loading sub module "i2c"
(II) LoadModule: "i2c"
(II) Module "i2c" already built-in
(II) RADEON(0): ref_freq: 1432, min_out_pll: 64800, max_out_pll: 120000, min_in_pll: 100, max_in_pll: 1350, xclk: 40000, sclk: 500.000000, mclk: 333.000000
(II) RADEON(0): PLL parameters: rf=1432 rd=12 min=64800 max=120000; xclk=40000
(WW) RADEON(0): LVDS Info:
XRes: 1366, YRes: 768, DotClock: 69300
HBlank: 96, HOverPlus: 32, HSyncWidth: 48
VBlank: 22, VOverPlus: 3, VSyncWidth: 6
(II) RADEON(0): Output LVDS has no monitor section
(II) RADEON(0): I2C bus "LVDS" initialized.
(II) RADEON(0): Output VGA-0 has no monitor section
(II) RADEON(0): I2C bus "VGA-0" initialized.
(II) RADEON(0): Output HDMI-0 has no monitor section
(II) RADEON(0): I2C bus "HDMI-0" initialized.
(II) RADEON(0): Port0:
XRANDR name: LVDS
Connector: LVDS
LCD1: INTERNAL_KLDSCP_LVTMA
DDC reg: 0x7e50
(II) RADEON(0): Port1:
XRANDR name: VGA-0
Connector: VGA
CRT1: INTERNAL_KLDSCP_DAC1
DDC reg: 0x7e40
(II) RADEON(0): Port2:
XRANDR name: HDMI-0
Connector: HDMI-A
DFP1: INTERNAL_UNIPHY
DDC reg: 0x7e60
(II) RADEON(0): I2C device "LVDS:ddc2" registered at address 0xA0.
(II) RADEON(0): EDID vendor "LGD", prod id 556
(II) RADEON(0): Printing DDC gathered Modelines:
(II) RADEON(0): Modeline "1366x768"x0.0 69.30 1366 1398 1446 1462 768 771 777 790 -hsync -vsync (47.4 kHz)
(II) RADEON(0): Output: LVDS, Detected Monitor Type: 2
(II) RADEON(0): EDID data from the display on output: LVDS ----------------------
(II) RADEON(0): Manufacturer: LGD Model: 22c Serial#: 0
(II) RADEON(0): Year: 2009 Week: 0
(II) RADEON(0): EDID Version: 1.3
(II) RADEON(0): Digital Display Input
(II) RADEON(0): Max Image Size [cm]: horiz.: 29 vert.: 17
(II) RADEON(0): Gamma: 2.20
(II) RADEON(0): No DPMS capabilities specified
(II) RADEON(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4
(II) RADEON(0): First detailed timing is preferred mode
(II) RADEON(0): redX: 0.589 redY: 0.349 greenX: 0.337 greenY: 0.548
(II) RADEON(0): blueX: 0.155 blueY: 0.122 whiteX: 0.313 whiteY: 0.329
(II) RADEON(0): Manufacturer's mask: 0
(II) RADEON(0): Supported detailed timing:
(II) RADEON(0): clock: 69.3 MHz Image Size: 294 x 166 mm
(II) RADEON(0): h_active: 1366 h_sync: 1398 h_sync_end 1446 h_blank_end 1462 h_border: 0
(II) RADEON(0): v_active: 768 v_sync: 771 v_sync_end 777 v_blanking: 790 v_border: 0
(II) RADEON(0): LG Displayf
(II) RADEON(0): LP133WH1-TLA2
(II) RADEON(0): EDID (in hex):
(II) RADEON(0): 00ffffffffffff0030e42c0200000000
(II) RADEON(0): 00130103801d11780ad5d59659568c27
(II) RADEON(0): 1f505400000001010101010101010101
(II) RADEON(0): 010101010101121b5660500016302030
(II) RADEON(0): 360026a6100000190000000000000000
(II) RADEON(0): 00000000000000000000000000fe004c
(II) RADEON(0): 4720446973706c61790a2020000000fe
(II) RADEON(0): 004c503133335748312d544c41320002
finished output detect: 0
(II) RADEON(0): I2C device "VGA-0:ddc2" registered at address 0xA0.
Dac detection success
(II) RADEON(0): Output: VGA-0, Detected Monitor Type: 0
finished output detect: 1
(II) RADEON(0): I2C device "HDMI-0:ddc2" registered at address 0xA0.
(II) RADEON(0): Output: HDMI-0, Detected Monitor Type: 0
finished output detect: 2
finished all detect
before xf86InitialConfiguration
(II) RADEON(0): EDID vendor "LGD", prod id 556
(II) RADEON(0): Printing DDC gathered Modelines:
(II) RADEON(0): Modeline "1366x768"x0.0 69.30 1366 1398 1446 1462 768 771 777 790 -hsync -vsync (47.4 kHz)
(II) RADEON(0): Output: LVDS, Detected Monitor Type: 2
(II) RADEON(0): EDID data from the display on output: LVDS ----------------------
(II) RADEON(0): Manufacturer: LGD Model: 22c Serial#: 0
(II) RADEON(0): Year: 2009 Week: 0
(II) RADEON(0): EDID Version: 1.3
(II) RADEON(0): Digital Display Input
(II) RADEON(0): Max Image Size [cm]: horiz.: 29 vert.: 17
(II) RADEON(0): Gamma: 2.20
(II) RADEON(0): No DPMS capabilities specified
(II) RADEON(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4
(II) RADEON(0): First detailed timing is preferred mode
(II) RADEON(0): redX: 0.589 redY: 0.349 greenX: 0.337 greenY: 0.548
(II) RADEON(0): blueX: 0.155 blueY: 0.122 whiteX: 0.313 whiteY: 0.329
(II) RADEON(0): Manufacturer's mask: 0
(II) RADEON(0): Supported detailed timing:
(II) RADEON(0): clock: 69.3 MHz Image Size: 294 x 166 mm
(II) RADEON(0): h_active: 1366 h_sync: 1398 h_sync_end 1446 h_blank_end 1462 h_border: 0
(II) RADEON(0): v_active: 768 v_sync: 771 v_sync_end 777 v_blanking: 790 v_border: 0
(II) RADEON(0): LG Display
(II) RADEON(0): LP133WH1-TLA2
(II) RADEON(0): EDID (in hex):
(II) RADEON(0): 00ffffffffffff0030e42c0200000000
(II) RADEON(0): 00130103801d11780ad5d59659568c27
(II) RADEON(0): 1f505400000001010101010101010101
(II) RADEON(0): 010101010101121b5660500016302030
(II) RADEON(0): 360026a6100000190000000000000000
(II) RADEON(0): 00000000000000000000000000fe004c
(II) RADEON(0): 4720446973706c61790a2020000000fe
(II) RADEON(0): 004c503133335748312d544c41320002
(II) RADEON(0): EDID vendor "LGD", prod id 556
Dac detection success
(II) RADEON(0): Output: VGA-0, Detected Monitor Type: 0
(II) RADEON(0): Output: HDMI-0, Detected Monitor Type: 0
(II) RADEON(0): Output LVDS connected
(II) RADEON(0): Output VGA-0 disconnected
(II) RADEON(0): Output HDMI-0 disconnected
(II) RADEON(0): Using exact sizes for initial modes
(II) RADEON(0): Output LVDS using initial mode 1366x768
(II) RADEON(0): Using default gamma of (1.0, 1.0, 1.0) unless otherwise stated.
after xf86InitialConfiguration
(**) RADEON(0): Display dimensions: (290, 170) mm
(**) RADEON(0): DPI set to (119, 204)
(II) Loading sub module "fb"
(II) LoadModule: "fb"
(II) Loading /usr/lib/xorg/modules/libfb.so
(II) Module fb: vendor="X.Org Foundation"
compiled for 1.7.3.902, module version = 1.0.0
ABI class: X.Org ANSI C Emulation, version 0.4
(II) Loading sub module "ramdac"
(II) LoadModule: "ramdac"
(II) Module "ramdac" already built-in
(==) RADEON(0): Will attempt to use R6xx/R7xx EXA support if DRI is enabled.
(II) Loading sub module "exa"
(II) LoadModule: "exa"
(II) Loading /usr/lib/xorg/modules/libexa.so
(II) Module exa: vendor="X.Org Foundation"
compiled for 1.7.3.902, module version = 2.5.0
ABI class: X.Org Video Driver, version 6.0
(!!) RADEON(0): For information on using the multimedia capabilities
of this adapter, please see http://gatos.sf.net.
(!!) RADEON(0): MergedFB support has been removed and replaced with xrandr 1.2 support
(II) UnloadModule: "vesa"
(II) Unloading /usr/lib/xorg/modules/drivers/vesa_drv.so
(--) Depth 24 pixmap format is 32 bpp
(II) RADEON(0): RADEONScreenInit e0000000 0 0
Output DIG0 transmitter setup success
Blank CRTC 0 success
Disable CRTC 0 success
Disable CRTC memreq 0 success
Blank CRTC 1 success
Disable CRTC 1 success
Disable CRTC memreq 1 success
(==) RADEON(0): Using 24 bit depth buffer
(II) RADEON(0): RADEONInitMemoryMap() :
(II) RADEON(0): mem_size : 0x18000000
(II) RADEON(0): MC_FB_LOCATION : 0x00d700c0
(II) RADEON(0): MC_AGP_LOCATION : 0x003f0000
(II) RADEON(0): Depth moves disabled by default
(II) RADEON(0): Allocating from a screen of 262080 kb
(II) RADEON(0): Will use 32 kb for hardware cursor 0 at offset 0x00801000
(II) RADEON(0): Will use 32 kb for hardware cursor 1 at offset 0x00805000
(II) RADEON(0): Will use 8196 kb for front buffer at offset 0x00000000
(II) RADEON(0): Will use 64 kb for PCI GART at offset 0x0fff0000
(II) RADEON(0): Will use 8196 kb for back buffer at offset 0x00809000
(II) RADEON(0): Will use 8256 kb for depth buffer at offset 0x0100a000
(II) RADEON(0): Will use 117760 kb for textures at offset 0x0181a000
(II) RADEON(0): Will use 119640 kb for X Server offscreen at offset 0x08b1a000
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 10, (OK)
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 10, (OK)
drmOpenByBusid: Searching for BusID pci:0000:01:05.0
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 10, (OK)
drmOpenByBusid: drmOpenMinor returns 10
drmOpenByBusid: drmGetBusid reports pci:0000:01:05.0
(II) [drm] DRM interface version 1.3
(II) [drm] DRM open master succeeded.
(II) RADEON(0): [drm] Using the DRM lock SAREA also for drawables.
(II) RADEON(0): [drm] framebuffer handle = 0xe0000000
(II) RADEON(0): [drm] added 1 reserved context for kernel
(II) RADEON(0): X context handle = 0x1
(II) RADEON(0): [drm] installed DRM signal handler
(II) RADEON(0): [pci] 32768 kB allocated with handle 0xf95fa000
(II) RADEON(0): [pci] ring handle = 0xf95fa000
(II) RADEON(0): [pci] Ring mapped at 0xa6ea3000
(II) RADEON(0): [pci] Ring contents 0x00000000
(II) RADEON(0): [pci] ring read ptr handle = 0xf96fb000
(II) RADEON(0): [pci] Ring read ptr mapped at 0xb76f3000
(II) RADEON(0): [pci] Ring read ptr contents 0x00000000
(II) RADEON(0): [pci] vertex/indirect buffers handle = 0xf96fc000
(II) RADEON(0): [pci] Vertex/indirect buffers mapped at 0xa6ca3000
(II) RADEON(0): [pci] Vertex/indirect buffers contents 0x00000000
(II) RADEON(0): [pci] GART texture map handle = 0xf98fc000
(II) RADEON(0): [pci] GART Texture map mapped at 0xa5023000
(II) RADEON(0): [drm] register handle = 0x2e440000
(II) RADEON(0): [dri] Visual configs initialized
(II) RADEON(0): RADEONRestoreMemMapRegisters() :
(II) RADEON(0): MC_FB_LOCATION : 0x00d700c0 0x00d700c0
(II) RADEON(0): MC_AGP_LOCATION : 0x003f0000
(==) RADEON(0): Backing store disabled
(II) RADEON(0): [DRI] installation complete
(II) RADEON(0): [drm] Added 32 65536 byte vertex/indirect buffers
(II) RADEON(0): [drm] Mapped 32 vertex/indirect buffers
(II) RADEON(0): [drm] dma control initialized, using IRQ 18
(II) RADEON(0): [drm] Initialized kernel GART heap manager, 29884416
(WW) RADEON(0): DRI init changed memory map, adjusting ...
(WW) RADEON(0): MC_FB_LOCATION was: 0x00d700c0 is: 0x00d700c0
(WW) RADEON(0): MC_AGP_LOCATION was: 0x003f0000 is: 0x00030000
(II) RADEON(0): RADEONRestoreMemMapRegisters() :
(II) RADEON(0): MC_FB_LOCATION : 0x00d700c0 0x00d700c0
(II) RADEON(0): MC_AGP_LOCATION : 0x00030000
(II) RADEON(0): Direct rendering enabled
(II) RADEON(0): Setting EXA maxPitchBytes
(II) EXA(0): Offscreen pixmap area of 122511360 bytes
(II) EXA(0): Driver registered support for the following operations:
(II) Solid
(II) Copy
(II) Composite (RENDER acceleration)
(II) UploadToScreen
(II) DownloadFromScreen
(II) RADEON(0): Acceleration enabled
(==) RADEON(0): DPMS enabled
(==) RADEON(0): Silken mouse enabled
(II) RADEON(0): Set up textured video
Output DIG0 transmitter setup success
Output CRT1 disable success
(II) RADEON(0): DIG0 transmitter: Coherent Mode enabled
Output DIG0 transmitter setup success
Blank CRTC 0 success
Disable CRTC 0 success
Disable CRTC memreq 0 success
Blank CRTC 1 success
Disable CRTC 1 success
Disable CRTC memreq 1 success
Output DIG0 transmitter setup success
Blank CRTC 0 success
Disable CRTC 0 success
Disable CRTC memreq 0 success
Mode 1366x768 - 1462 790 10
(II) RADEON(0): RADEONRestoreMemMapRegisters() :
(II) RADEON(0): MC_FB_LOCATION : 0x00d700c0 0x00d700c0
(II) RADEON(0): MC_AGP_LOCATION : 0x00030000
freq: 69300000
best_freq: 69298571
best_feedback_div: 813
best_ref_div: 14
best_post_div: 12
(II) RADEON(0): crtc(0) Clock: mode 69300, PLL 69290
(II) RADEON(0): crtc(0) PLL : refdiv 14, fbdiv 0x32D(813), pdiv 12
Set CRTC 0 PLL success
Set CRTC Timing success
Set CRTC 0 Overscan success
Not using RMX
scaler 0 setup success
Set CRTC 0 Source success
crtc 0 YUV disable setup success
Output DIG0 transmitter setup success
Output DIG2 encoder setup success
Output DIG2 encoder setup success
Output DIG0 transmitter setup success
Output DIG0 transmitter setup success
Output DIG0 transmitter setup success
Enable CRTC memreq 0 success
Enable CRTC 0 success
Unblank CRTC 0 success
Output CRT1 disable success
(II) RADEON(0): DIG0 transmitter: Coherent Mode enabled
Output DIG0 transmitter setup success
Blank CRTC 1 success
Disable CRTC 1 success
Disable CRTC memreq 1 success
(II) RADEON(0): RandR 1.2 enabled, ignore the following RandR disabled message.
(--) RandR disabled
(II) Initializing built-in extension Generic Event Extension
(II) Initializing built-in extension SHAPE
(II) Initializing built-in extension MIT-SHM
(II) Initializing built-in extension XInputExtension
(II) Initializing built-in extension XTEST
(II) Initializing built-in extension BIG-REQUESTS
(II) Initializing built-in extension SYNC
(II) Initializing built-in extension XKEYBOARD
(II) Initializing built-in extension XC-MISC
(II) Initializing built-in extension SECURITY
(II) Initializing built-in extension XINERAMA
(II) Initializing built-in extension XFIXES
(II) Initializing built-in extension RENDER
(II) Initializing built-in extension RANDR
(II) Initializing built-in extension COMPOSITE
(II) Initializing built-in extension DAMAGE
(II) AIGLX: Screen 0 is not DRI2 capable
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 11, (OK)
drmOpenByBusid: Searching for BusID pci:0000:01:05.0
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 11, (OK)
drmOpenByBusid: drmOpenMinor returns 11
drmOpenByBusid: drmGetBusid reports pci:0000:01:05.0
(EE) AIGLX error: dlopen of /usr/lib/xorg/modules/dri/r600_dri.so failed (/usr/lib/xorg/modules/dri/r600_dri.so: file too short)
(EE) AIGLX: reverting to software rendering
(II) AIGLX: Loaded and initialized /usr/lib/xorg/modules/dri/swrast_dri.so
(II) GLX: Initialized DRISWRAST GL provider for screen 0
(II) RADEON(0): Setting screen physical size to 361 x 203
(II) config/hal: Adding input device AT Translated Set 2 keyboard
(II) LoadModule: "evdev"
(II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
(II) Module evdev: vendor="X.Org Foundation"
compiled for 1.7.3, module version = 2.3.2
Module class: X.Org XInput Driver
ABI class: X.Org XInput driver, version 7.0
(**) AT Translated Set 2 keyboard: always reports core events
(**) AT Translated Set 2 keyboard: Device: "/dev/input/event1"
(II) AT Translated Set 2 keyboard: Found keys
(II) AT Translated Set 2 keyboard: Configuring as keyboard
(II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "evdev"
(**) Option "xkb_layout" "us"
(II) config/hal: Adding input device Macintosh mouse button emulation
(**) Macintosh mouse button emulation: always reports core events
(**) Macintosh mouse button emulation: Device: "/dev/input/event0"
(II) Macintosh mouse button emulation: Found 3 mouse buttons
(II) Macintosh mouse button emulation: Found relative axes
(II) Macintosh mouse button emulation: Found x and y relative axes
(II) Macintosh mouse button emulation: Configuring as mouse
(**) Macintosh mouse button emulation: YAxisMapping: buttons 4 and 5
(**) Macintosh mouse button emulation: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
(II) XINPUT: Adding extended input device "Macintosh mouse button emulation" (type: MOUSE)
(**) Macintosh mouse button emulation: (accel) keeping acceleration scheme 1
(**) Macintosh mouse button emulation: (accel) acceleration profile 0
(II) Macintosh mouse button emulation: initialized for relative axes.
(II) config/hal: Adding input device ImPS/2 Generic Wheel Mouse
(**) ImPS/2 Generic Wheel Mouse: always reports core events
(**) ImPS/2 Generic Wheel Mouse: Device: "/dev/input/event12"
(II) ImPS/2 Generic Wheel Mouse: Found 3 mouse buttons
(II) ImPS/2 Generic Wheel Mouse: Found scroll wheel(s)
(II) ImPS/2 Generic Wheel Mouse: Found relative axes
(II) ImPS/2 Generic Wheel Mouse: Found x and y relative axes
(II) ImPS/2 Generic Wheel Mouse: Configuring as mouse
(**) ImPS/2 Generic Wheel Mouse: YAxisMapping: buttons 4 and 5
(**) ImPS/2 Generic Wheel Mouse: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
(II) XINPUT: Adding extended input device "ImPS/2 Generic Wheel Mouse" (type: MOUSE)
(**) ImPS/2 Generic Wheel Mouse: (accel) keeping acceleration scheme 1
(**) ImPS/2 Generic Wheel Mouse: (accel) acceleration profile 0
(II) ImPS/2 Generic Wheel Mouse: initialized for relative axes.
(II) config/hal: Adding input device hp webcam
(**) hp webcam: always reports core events
(**) hp webcam: Device: "/dev/input/event11"
(II) hp webcam: Found keys
(II) hp webcam: Configuring as keyboard
(II) XINPUT: Adding extended input device "hp webcam" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "evdev"
(**) Option "xkb_layout" "us"
(II) config/hal: Adding input device Sleep Button
(**) Sleep Button: always reports core events
(**) Sleep Button: Device: "/dev/input/event3"
(II) Sleep Button: Found keys
(II) Sleep Button: Configuring as keyboard
(II) XINPUT: Adding extended input device "Sleep Button" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "evdev"
(**) Option "xkb_layout" "us"
(II) config/hal: Adding input device Power Button
(**) Power Button: always reports core events
(**) Power Button: Device: "/dev/input/event2"
(II) Power Button: Found keys
(II) Power Button: Configuring as keyboard
(II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "evdev"
(**) Option "xkb_layout" "us"
(II) config/hal: Adding input device Video Bus
(**) Video Bus: always reports core events
(**) Video Bus: Device: "/dev/input/event7"
(II) Video Bus: Found keys
(II) Video Bus: Configuring as keyboard
(II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "evdev"
(**) Option "xkb_layout" "us"
(II) config/hal: Adding input device Power Button
(**) Power Button: always reports core events
(**) Power Button: Device: "/dev/input/event5"
(II) Power Button: Found keys
(II) Power Button: Configuring as keyboard
(II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "evdev"
(**) Option "xkb_layout" "us"
(II) RADEON(0): EDID vendor "LGD", prod id 556
(II) RADEON(0): Printing DDC gathered Modelines:
(II) RADEON(0): Modeline "1366x768"x0.0 69.30 1366 1398 1446 1462 768 771 777 790 -hsync -vsync (47.4 kHz)
(II) RADEON(0): Output: LVDS, Detected Monitor Type: 2
(II) RADEON(0): EDID data from the display on output: LVDS ----------------------
(II) RADEON(0): Manufacturer: LGD Model: 22c Serial#: 0
(II) RADEON(0): Year: 2009 Week: 0
(II) RADEON(0): EDID Version: 1.3
(II) RADEON(0): Digital Display Input
(II) RADEON(0): Max Image Size [cm]: horiz.: 29 vert.: 17
(II) RADEON(0): Gamma: 2.20
(II) RADEON(0): No DPMS capabilities specified
(II) RADEON(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4
(II) RADEON(0): First detailed timing is preferred mode
(II) RADEON(0): redX: 0.589 redY: 0.349 greenX: 0.337 greenY: 0.548
(II) RADEON(0): blueX: 0.155 blueY: 0.122 whiteX: 0.313 whiteY: 0.329
(II) RADEON(0): Manufacturer's mask: 0
(II) RADEON(0): Supported detailed timing:
(II) RADEON(0): clock: 69.3 MHz Image Size: 294 x 166 mm
(II) RADEON(0): h_active: 1366 h_sync: 1398 h_sync_end 1446 h_blank_end 1462 h_border: 0
(II) RADEON(0): v_active: 768 v_sync: 771 v_sync_end 777 v_blanking: 790 v_border: 0
(II) RADEON(0): LG Display
(II) RADEON(0): LP133WH1-TLA2
(II) RADEON(0): EDID (in hex):
(II) RADEON(0): 00ffffffffffff0030e42c0200000000
(II) RADEON(0): 00130103801d11780ad5d59659568c27
(II) RADEON(0): 1f505400000001010101010101010101
(II) RADEON(0): 010101010101121b5660500016302030
(II) RADEON(0): 360026a6100000190000000000000000
(II) RADEON(0): 00000000000000000000000000fe004c
(II) RADEON(0): 4720446973706c61790a2020000000fe
(II) RADEON(0): 004c503133335748312d544c41320002
(II) RADEON(0): EDID vendor "LGD", prod id 556
Dac detection success
(II) RADEON(0): Output: VGA-0, Detected Monitor Type: 0
(II) RADEON(0): Output: HDMI-0, Detected Monitor Type: 0
(II) RADEON(0): EDID vendor "LGD", prod id 556
(II) RADEON(0): Printing DDC gathered Modelines:
(II) RADEON(0): Modeline "1366x768"x0.0 69.30 1366 1398 1446 1462 768 771 777 790 -hsync -vsync (47.4 kHz)
(II) RADEON(0): Output: LVDS, Detected Monitor Type: 2
(II) RADEON(0): EDID data from the display on output: LVDS ----------------------
(II) RADEON(0): Manufacturer: LGD Model: 22c Serial#: 0
(II) RADEON(0): Year: 2009 Week: 0
(II) RADEON(0): EDID Version: 1.3
(II) RADEON(0): Digital Display Input
(II) RADEON(0): Max Image Size [cm]: horiz.: 29 vert.: 17
(II) RADEON(0): Gamma: 2.20
(II) RADEON(0): No DPMS capabilities specified
(II) RADEON(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4
(II) RADEON(0): First detailed timing is preferred mode
(II) RADEON(0): redX: 0.589 redY: 0.349 greenX: 0.337 greenY: 0.548
(II) RADEON(0): blueX: 0.155 blueY: 0.122 whiteX: 0.313 whiteY: 0.329
(II) RADEON(0): Manufacturer's mask: 0
(II) RADEON(0): Supported detailed timing:
(II) RADEON(0): clock: 69.3 MHz Image Size: 294 x 166 mm
(II) RADEON(0): h_active: 1366 h_sync: 1398 h_sync_end 1446 h_blank_end 1462 h_border: 0
(II) RADEON(0): v_active: 768 v_sync: 771 v_sync_end 777 v_blanking: 790 v_border: 0
(II) RADEON(0): LG Display
(II) RADEON(0): LP133WH1-TLA2
(II) RADEON(0): EDID (in hex):
(II) RADEON(0): 00ffffffffffff0030e42c0200000000
(II) RADEON(0): 00130103801d11780ad5d59659568c27
(II) RADEON(0): 1f505400000001010101010101010101
(II) RADEON(0): 010101010101121b5660500016302030
(II) RADEON(0): 360026a6100000190000000000000000
(II) RADEON(0): 00000000000000000000000000fe004c
(II) RADEON(0): 4720446973706c61790a2020000000fe
(II) RADEON(0): 004c503133335748312d544c41320002
(II) RADEON(0): EDID vendor "LGD", prod id 556
Dac detection success
(II) RADEON(0): Output: VGA-0, Detected Monitor Type: 0
(II) RADEON(0): Output: HDMI-0, Detected Monitor Type: 0
(II) RADEON(0): EDID vendor "LGD", prod id 556
(II) RADEON(0): Printing DDC gathered Modelines:
(II) RADEON(0): Modeline "1366x768"x0.0 69.30 1366 1398 1446 1462 768 771 777 790 -hsync -vsync (47.4 kHz)
(II) RADEON(0): Output: LVDS, Detected Monitor Type: 2
(II) RADEON(0): EDID data from the display on output: LVDS ----------------------
(II) RADEON(0): Manufacturer: LGD Model: 22c Serial#: 0
(II) RADEON(0): Year: 2009 Week: 0
(II) RADEON(0): EDID Version: 1.3
(II) RADEON(0): Digital Display Input
(II) RADEON(0): Max Image Size [cm]: horiz.: 29 vert.: 17
(II) RADEON(0): Gamma: 2.20
(II) RADEON(0): No DPMS capabilities specified
(II) RADEON(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4
(II) RADEON(0): First detailed timing is preferred mode
(II) RADEON(0): redX: 0.589 redY: 0.349 greenX: 0.337 greenY: 0.548
(II) RADEON(0): blueX: 0.155 blueY: 0.122 whiteX: 0.313 whiteY: 0.329
(II) RADEON(0): Manufacturer's mask: 0
(II) RADEON(0): Supported detailed timing:
(II) RADEON(0): clock: 69.3 MHz Image Size: 294 x 166 mm
(II) RADEON(0): h_active: 1366 h_sync: 1398 h_sync_end 1446 h_blank_end 1462 h_border: 0
(II) RADEON(0): v_active: 768 v_sync: 771 v_sync_end 777 v_blanking: 790 v_border: 0
(II) RADEON(0): LG Display
(II) RADEON(0): LP133WH1-TLA2
(II) RADEON(0): EDID (in hex):
(II) RADEON(0): 00ffffffffffff0030e42c0200000000
(II) RADEON(0): 00130103801d11780ad5d59659568c27
(II) RADEON(0): 1f505400000001010101010101010101
(II) RADEON(0): 010101010101121b5660500016302030
(II) RADEON(0): 360026a6100000190000000000000000
(II) RADEON(0): 00000000000000000000000000fe004c
(II) RADEON(0): 4720446973706c61790a2020000000fe
(II) RADEON(0): 004c503133335748312d544c41320002
(II) RADEON(0): EDID vendor "LGD", prod id 556
Dac detection success
(II) RADEON(0): Output: VGA-0, Detected Monitor Type: 0
(II) RADEON(0): Output: HDMI-0, Detected Monitor Type: 0
(II) RADEON(0): EDID vendor "LGD", prod id 556
(II) RADEON(0): Printing DDC gathered Modelines:
(II) RADEON(0): Modeline "1366x768"x0.0 69.30 1366 1398 1446 1462 768 771 777 790 -hsync -vsync (47.4 kHz)
(II) RADEON(0): Output: LVDS, Detected Monitor Type: 2
(II) RADEON(0): EDID data from the display on output: LVDS ----------------------
(II) RADEON(0): Manufacturer: LGD Model: 22c Serial#: 0
(II) RADEON(0): Year: 2009 Week: 0
(II) RADEON(0): EDID Version: 1.3
(II) RADEON(0): Digital Display Input
(II) RADEON(0): Max Image Size [cm]: horiz.: 29 vert.: 17
(II) RADEON(0): Gamma: 2.20
(II) RADEON(0): No DPMS capabilities specified
(II) RADEON(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4
(II) RADEON(0): First detailed timing is preferred mode
(II) RADEON(0): redX: 0.589 redY: 0.349 greenX: 0.337 greenY: 0.548
(II) RADEON(0): blueX: 0.155 blueY: 0.122 whiteX: 0.313 whiteY: 0.329
(II) RADEON(0): Manufacturer's mask: 0
(II) RADEON(0): Supported detailed timing:
(II) RADEON(0): clock: 69.3 MHz Image Size: 294 x 166 mm
(II) RADEON(0): h_active: 1366 h_sync: 1398 h_sync_end 1446 h_blank_end 1462 h_border: 0
(II) RADEON(0): v_active: 768 v_sync: 771 v_sync_end 777 v_blanking: 790 v_border: 0
(II) RADEON(0): LG Display
(II) RADEON(0): LP133WH1-TLA2
(II) RADEON(0): EDID (in hex):
(II) RADEON(0): 00ffffffffffff0030e42c0200000000
(II) RADEON(0): 00130103801d11780ad5d59659568c27
(II) RADEON(0): 1f505400000001010101010101010101
(II) RADEON(0): 010101010101121b5660500016302030
(II) RADEON(0): 360026a6100000190000000000000000
(II) RADEON(0): 00000000000000000000000000fe004c
(II) RADEON(0): 4720446973706c61790a2020000000fe
(II) RADEON(0): 004c503133335748312d544c41320002
(II) RADEON(0): EDID vendor "LGD", prod id 556
Dac detection success
(II) RADEON(0): Output: VGA-0, Detected Monitor Type: 0
(II) RADEON(0): Output: HDMI-0, Detected Monitor Type: 0
(II) RADEON(0): EDID vendor "LGD", prod id 556
(II) RADEON(0): Printing DDC gathered Modelines:
(II) RADEON(0): Modeline "1366x768"x0.0 69.30 1366 1398 1446 1462 768 771 777 790 -hsync -vsync (47.4 kHz)
(II) RADEON(0): Output: LVDS, Detected Monitor Type: 2
(II) RADEON(0): EDID data from the display on output: LVDS ----------------------
(II) RADEON(0): Manufacturer: LGD Model: 22c Serial#: 0
(II) RADEON(0): Year: 2009 Week: 0
(II) RADEON(0): EDID Version: 1.3
(II) RADEON(0): Digital Display Input
(II) RADEON(0): Max Image Size [cm]: horiz.: 29 vert.: 17
(II) RADEON(0): Gamma: 2.20
(II) RADEON(0): No DPMS capabilities specified
(II) RADEON(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4
(II) RADEON(0): First detailed timing is preferred mode
(II) RADEON(0): redX: 0.589 redY: 0.349 greenX: 0.337 greenY: 0.548
(II) RADEON(0): blueX: 0.155 blueY: 0.122 whiteX: 0.313 whiteY: 0.329
(II) RADEON(0): Manufacturer's mask: 0
(II) RADEON(0): Supported detailed timing:
(II) RADEON(0): clock: 69.3 MHz Image Size: 294 x 166 mm
(II) RADEON(0): h_active: 1366 h_sync: 1398 h_sync_end 1446 h_blank_end 1462 h_border: 0
(II) RADEON(0): v_active: 768 v_sync: 771 v_sync_end 777 v_blanking: 790 v_border: 0
(II) RADEON(0): LG Display
(II) RADEON(0): LP133WH1-TLA2
(II) RADEON(0): EDID (in hex):
(II) RADEON(0): 00ffffffffffff0030e42c0200000000
(II) RADEON(0): 00130103801d11780ad5d59659568c27
(II) RADEON(0): 1f505400000001010101010101010101
(II) RADEON(0): 010101010101121b5660500016302030
(II) RADEON(0): 360026a6100000190000000000000000
(II) RADEON(0): 00000000000000000000000000fe004c
(II) RADEON(0): 4720446973706c61790a2020000000fe
(II) RADEON(0): 004c503133335748312d544c41320002
(II) RADEON(0): EDID vendor "LGD", prod id 556
Dac detection success
(II) RADEON(0): Output: VGA-0, Detected Monitor Type: 0
(II) RADEON(0): Output: HDMI-0, Detected Monitor Type: 0
(II) RADEON(0): EDID vendor "LGD", prod id 556
(II) RADEON(0): Printing DDC gathered Modelines:
(II) RADEON(0): Modeline "1366x768"x0.0 69.30 1366 1398 1446 1462 768 771 777 790 -hsync -vsync (47.4 kHz)
(II) RADEON(0): Output: LVDS, Detected Monitor Type: 2
(II) RADEON(0): EDID data from the display on output: LVDS ----------------------
(II) RADEON(0): Manufacturer: LGD Model: 22c Serial#: 0
(II) RADEON(0): Year: 2009 Week: 0
(II) RADEON(0): EDID Version: 1.3
(II) RADEON(0): Digital Display Input
(II) RADEON(0): Max Image Size [cm]: horiz.: 29 vert.: 17
(II) RADEON(0): Gamma: 2.20
(II) RADEON(0): No DPMS capabilities specified
(II) RADEON(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4
(II) RADEON(0): First detailed timing is preferred mode
(II) RADEON(0): redX: 0.589 redY: 0.349 greenX: 0.337 greenY: 0.548
(II) RADEON(0): blueX: 0.155 blueY: 0.122 whiteX: 0.313 whiteY: 0.329
(II) RADEON(0): Manufacturer's mask: 0
(II) RADEON(0): Supported detailed timing:
(II) RADEON(0): clock: 69.3 MHz Image Size: 294 x 166 mm
(II) RADEON(0): h_active: 1366 h_sync: 1398 h_sync_end 1446 h_blank_end 1462 h_border: 0
(II) RADEON(0): v_active: 768 v_sync: 771 v_sync_end 777 v_blanking: 790 v_border: 0
(II) RADEON(0): LG Display
(II) RADEON(0): LP133WH1-TLA2
(II) RADEON(0): EDID (in hex):
(II) RADEON(0): 00ffffffffffff0030e42c0200000000
(II) RADEON(0): 00130103801d11780ad5d59659568c27
(II) RADEON(0): 1f505400000001010101010101010101
(II) RADEON(0): 010101010101121b5660500016302030
(II) RADEON(0): 360026a6100000190000000000000000
(II) RADEON(0): 00000000000000000000000000fe004c
(II) RADEON(0): 4720446973706c61790a2020000000fe
(II) RADEON(0): 004c503133335748312d544c41320002
(II) RADEON(0): EDID vendor "LGD", prod id 556
Dac detection success
(II) RADEON(0): Output: VGA-0, Detected Monitor Type: 0
(II) RADEON(0): Output: HDMI-0, Detected Monitor Type: 0
I've bolded the sections in question. Here's a little more info:
[shane@shane-arch ~]$ glxinfo | grep direct
direct rendering: Yes
[shane@shane-arch ~]$ lsmod | grep kms
drm_kms_helper 21971 1 radeon
drm 126588 4 radeon,ttm,drm_kms_helper
Any help would be appreciated I'd like to get compiz up and running.
-Shane
Last edited by krazyshane (2010-02-05 17:23:00)

You nailed it with the ati-dri package! Had a corrupt checksum! Forced a reinstall and now all good
Thanks for the quick reply!
-Shane

Publishing Streams in Different rooms?

Hi,
So If i have someone streaming their cam and audio in a room. Then want to redirect that stream in a different room, but make it work in such a way where the user does not have to republish. is that possible. I understand you can be connected in multiple rooms at the same time. but could you detect that the camera is on in one room and redirect the stream into another?
hope that makes sense.
thanks.
...russ

Hi Russ,
When you connect to any room, you get a connectSession Instance, and whenever any stream( A/V) has to be created, it requires the NetConnection which is obtained from the connectSession instance( Refer to any of the Audio/Webcam Publisher code for details about creating NetStream).
Now if you are redirecting to a different room, it means a completely new connectSession and thus a new NetConnection, so you can't redirect the stream to a different room automatically.
What you can do is , to have your audio/webcam publisher publishing to a different room, something like
audioPub.stop();
audioPub.connectSession = "newSessionInstance" ;
audioPub.subscribe();
audioPub.publish();
to redirect your publisher to the new room that has the new connectSession.
Hope this helps
Thanks
Hironmay Basu

Live Meeting on mac?

Hello - I am considering using Live Meeting but I heard that it doesn't support Mac users well - specifically I heard the following are NOT available, but I am not sure if this has changed with any recent client updates. Does anyone know if the following
are available for users on a Mac?
• Computer audio
• Webcam video
• Docking of menu panes
• Single-application sharing
• Handout uploading and deleting
• Breakout room setup/administration
• Recording playback
• English only UI
• Desktop sharing from Mac to Windows OS

Hi,
As far as I know,there isn't new version of Live Meeting.
In Lync Server 2010,Live meeting client is merged into the Lync 2010 as a unified client.
Here is the detail about Lync 2010 compatibility.
http://technet.microsoft.com/en-us/library/gg412817.aspx
Hope this useful!
Regards,
Sharon
Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread.

CRASHED: Microsoft has stopped working error!

Dear all,
Recently, I have installed Microsoft Lync 2013 32-bit on my Lenovo K2450 Windows 7 laptop. It has never been run before on this laptop. When I tried opening it, the following message "Microsoft Lync has stopped working" is displayed and closes unexpectedly.
Other Microsoft programs like Excel, Powerpoint 2013 works fine. I have looked up similar topics on this forum and tried the methods below but still encountered the same error.
E.g. - tried disabling/uninstalling Bluetooth driver
- uninstalling Microsoft Lync 2013 and reinstalling it back
- repairing Microsoft Lync 2013 and restarting
Any help will be greatly appreciated! Any suggestions I will be happy to test/try it out. Thank you in advance!
Here's the error message:
Problem Event Name: APPCRASH
Application Name: lync.exe
Application Version: 15.0.4693.1000
Application Timestamp: 54b5cf44
Fault Module Name: KERNELBASE.dll
Fault Module Version: 6.1.7601.18409
Fault Module Timestamp: 53159a86
Exception Code: e06d7363
Exception Offset: 0000c42d
OS Version: 6.1.7601.2.1.0.256.48
Locale ID: 18441

There are almost always driver related. Try booting in safe mode with networking and see if you can get it to start without crashing. Also try using generic video/audio/webcam drivers one at a time to see if you can identify the culprit.
Please remember, if you see a post that helped you please click "Vote As Helpful" and if it answered your question please click "Mark As Answer".
SWC Unified Communications
This forum post is based upon my personal experience and does not necessarily reflect the opinion or view of Microsoft, its employees, or other MVPs.

W520 Fan too noisy

Hi,
I have just done a clean install of Windows on my thinkpad. I had put most of the drivers on by hand, but I missed a few things like the lock key and the power manager app (I did install the battery driver, just not the app) so I downloaded system updater and got all the updates I needed (I left out the audio, webcam and network drivers because Windows has found them and they work fine)
The fan has now got stuck on about 80% and is unreasonably noisy. I have tried switching from "Maximum Performance" to "optimal for power source" but it still seems to be running at near full whack. I dont mind when I am doing something intense, but this is just while I am browsing the web or idle on the desktop. How do I slow it down?
I've seen there are a few applications you can get to over-ride the fan speed but is there a Lenovo solution? The whole point of the clean install was to get rid of all the rubbish I had accumulated!

Welcome to the forum!
My favorite one is TPFanControl, it was done specifically for Thinkpads and works fine in most of mine.
Checking the fan is clean would be also a good idea, you need to remove the keyboard, block the fan with your finger and use compressed air to clean all dust bunnies.
Check the Lenovo Hardware Maintenance Manual for the steps to remove the keyboard: Click me! (Chapter 1060)
If none of the above does help it will be about time to replacing the thermal compounds... But let's check that later
/L40SX/240/240X/2*340CSE/360PE/365XD/380D/380E/380XD/380Z/390/560E/560X/2*570/2*600/600E/750Cs/755C/760CD/760EL/760XD/770E/A20p/A22p
A31/i1600/G40/R50p/R61i/S30/SL510/2*T22/4*T4x/11*T6x/6*T4x0x/6*T5x0/3*W5x0/W700/3*X2x/4*X3x/3*X4x/5*X6x/3*X6xT/10*X2xx/2*X200T/4*X30x/Z60m/3*Z61x
Comunidad en Español English Community Deutsche Community Русскоязычное Сообщество

Few questions about reset to factory settings

Hey!
When you reset your laptop to factory settings (HDD Recovery), does Windows get deleted too? And audio, webcamera etc?
I mean, when you have restarted the laptop, is it ready for use? Can you just use it like normal? Or do you have to install drivers and so on?
I appreciate help.

Hello Elodie and welcome to Toshiba forum.
I will try to offer some answers:
> When you reset your laptop to factory settings (HDD Recovery), does Windows get deleted too?
Generally speaking everything will be deleted. With other words certain partition will be formatted at first and OS (recovery image) will be installed.
> And audio, webcamera etc?
Yes, everything. The whole partition content.
> I mean, when you have restarted the laptop, is it ready for use?
When the recovery image installation is finished after notebook restart it will be ready for use.
> Can you just use it like normal?
Yes.
> Or do you have to install drivers and so on?
Original Toshiba recovery image contains operating system, all necessary drivers, Toshiba specific tools/utilities and some additional software so everything will be installed.
If you have more questions you are welcome. ;)

Is there a way to import video/audio clips from Logitech webcam?

I just purchased a used Logitech Quickcam Vision Pro for Mac. A Logitech driver is apparently not required. I connected it to a USB port on my mini. I couldn't find any way of downloading Photo Booth so I downloaded Funny Photographer (http://homepage.mac.com/spillnerclan/fabian/funnyphotographer/Funny%20Photograph er.html).
With Funny Photographer I am able to capture still photos.
Eventually, I intend using the webcam with Skype. In the meantime I would like to capture audio and video clips. This is not possible in iMovie6 (at least with a USB device). Is there a way to do this? Might Quicktime PRO work? Thanks.
Owen

Hi Owen,
I don't know about QT Pro, but Snapz Pro X allows you to effortlessly record anything on your screen, saving it as a QuickTime® movie or...
http://www.ambrosiasw.com/utilities/snapzprox/
BTV allows you to view video from any video input source, either in a window or full screen on an entire monitor. Video can be captured to disk as a standard QuickTime movie file...
http://www.bensoftware.com/btv/index.html

Inspiron 1525 not able to select internal mic for webcam, nor is it showing up on Control Panel, Sound, Audio Devices

Initial problem was Dell Webcam video recording records no sound.
In Control Panel, Device Manager, Sound Video and Game Controllers there are two High Definition Audio Devices listed: Location 1 (Internal High Definition Audio Bus) - I deduce this is the internal mic; and Location 2 (Internal High Definition Audio Bus) - I deduce this is external microphone jack. Both have the same driver version.
The Control Panel, Sound, Recordings Tab showed 2 devices that looked identical except the bars that show green with volume were only on the first one, which is also the default one, and would detect sound if you got real close to the webcam mic when talking. Both devices displayed as 'working'.
Accessories, Sound Recorder recordings are silent no matter how close you get to internal webcam mic.
Dell WebCam Audio Source tab has two selections, both reading Microphone (3 - High Definition Audio Device). Both selections record sound with the EXTERNAL MIC jack. There is no way to select the internal webcam mic, it is not an option.
Per instructions found on the web, I uninstalled the first device only in Device Manager and rebooted. The same driver version as before was installed. But now the settings have changed. Device Mgr still shows Loc 1 and Loc 2. However, under the Sound, Recordings tab there are still 2 devices, but the first one says 'currently unavailable' , is still the default, and the sound bars that go green for audio testing are on the SECOND device now instead of the first one. If you check the Properties for each device, they BOTH are showing the same location Location 2 (Internal High Definition Audio Bus), i.e., the external mic jack. Loc 1 device (built in mic) is not showing up!!
Accessories Sound Recorder works with the EXTERNAL mic. (How does it know which one to use, it's not giving me a choice?)
So the Location 1 device (internal mic) is not showing up anywhere besides the device manager. I want to use the internal mic for skype and webcam. Somehow I need to get the Loc 1 device to show up on the Sound - Recording tab and in the Webcam Audio Source list? What do I do?
Thank you in advance for your help.

kestark
This is Vista.
Go to the Inspiron 1525 support page. Find the small blue "Change OS" and click on the arrow. Select Vista.Then download and install these 3 items with a restart between each one.
1. Dell System Software in the System Utilities category.
2. Intel Mobile Chipset in the Chipset category.
3. Sigmatel audio driver in the Audio category.
See if it works any better after you get the Sigmatel driver installed.

NX Ultra Webcam, audio and video not in sync...

I have a problem with my NX Ultra webcam. When I record video the audio is never in sync with the video. There is always like a 2 or 3 second delay. It's really annoying. Does anyone know of a way to fix this? I have the latest drivers and everything.
Check out this link to see what I mean...
http://youtube.com/watch?v=w7IYYi0-ZeM

BrainDamage,
Yes, the files are indeed large with no compression. But that confirms that the camera and soundcard are working fine. At this point, you will want to try different compression methods and / or reinstall your video codecs with the latest revisions and see if that improves your sync issue.
Daniel

Problem : Recording video & audio from webcam

Hi all
I want to record myself to see the expression on my face on average through the USB webcam .
I use mencoder for recording from USB webcam .
mencoder tv:// -tv driver=v4l2:width=640:height=480:device=/dev/video0:forceaudio:adevice=/dev/dsp -ovc lavc -oac mp3lame -lameopts cbr:br=64:mode=3 -fps 16.2 -o test16.2.avi
The problem is that the audio is not synchronized with the video
what can i do ? help!
Last edited by remstereo (2010-11-17 08:16:45)

up

No Audio on Webcam

When I try to record a video using my webcam, there is no sound. I reinstall the Realtek Audio Driver, but it did not work. I don't know what to do. What are my other options? My model is a Satelitte A205-S5879 and I am using Windows Vista Home Premium. The webcam is bult-in and its name is Camera Assistant Software.

I have the same problem also & have not found a solution. I also show a hardware buss that has no signiture so I can not install a driver. I think that may be part of my problem??

Webcam/Audio Input

I am admittedly an amateur at Actionscript, but I'm trying to
produce an example of Flash's ability to process video/microphone
data as a "jumping off" point for other projects. My problem is:
I am using some open source to pick up web cam movement and
produce a matrix based on such. I have added the code to receive
microphone input, which worked in the example (provided at
kirupa.com) that I composed on my machine. I am trying to replace
the "dot_mc.1=255" value with the microphone activity value
(0-100?) yet I am getting a response of "The property being
referenced does not have the static attribute." I understand this
statement, but I am unsure as how to re-form this statement to
accept variable data.
Here is the code so far:
import flash.display.*
import flash.geom.*
mic = Microphone.get();
_root.attachAudio(mic);
mic.setUseEchoSuppression(false);
function initialize()
setInterval(this,"snap",100)
this.createEmptyMovieClip("snap_mc",this.getNextHi
ghestDepth())
snap_mc._x=(Stage.width/2)-(scale*w/2)
snap_mc._y=(Stage.height/2)-(scale*h/2)
m=new Matrix()
m.scale((output._xscale/100),(output._yscale/100))
now=new BitmapData(w,h)
rt=new Rectangle(0,0,w,h)
n=0
for(x=1;x<w;x+=o)
for(y=1;y<h;y+=o)
++n
dot_mc=snap_mc.createEmptyMovieClip("dot"+n,n)
dot_mc._x=x*scale
dot_mc._y=y*scale
dot_mc.lineStyle(dblo,0x000000)
dot_mc.lineTo(0,1)
function snap()
var c=0
now.draw(output,m)
for(var x=1;x<w;x+=o)
for(var y=1;y<h;y+=o)
++c
nc=now.getPixel(x,y)
nr=nc>>16&0xff;
ng=nc>>8&0xff;
nb=nc&0xff;
nl=Math.sqrt(nr*nr + ng*ng + nb*nb)
bc=before.getPixel(x,y)
br=bc>>16&0xff;
bg=bc>>8&0xff
bb=bc&0xff
bl=Math.sqrt(br*br + bg*bg + bb*bb)
d=Math.round(Math.abs(bl-nl))
dot_mc=snap_mc["dot"+c]
if(d>tolerance)
dot_mc.clear()
dot_mc.l=255
dot_mc.lineStyle(dblo,255<<8)
dot_mc.lineTo(0,1)
dot_mc.onEnterFrame=fadePixel
updateAfterEvent()
before=now.clone()
function fadePixel()
this.clear()
this.l-=this._parent._parent.ml
this.lineStyle(this._parent._parent.dblo,this.l<<8 )
this.lineTo(0,1)
if(this.l == 0)
delete this.onEnterFrame
Altering the dot_mc value varies the colors of the webcam
matrix dots, so I just need the activity level on the microphone to
act as the value and perhaps multiply it by 2 (since the dot_mc
value can be up to 255).
Any Ideas on how to repair this?

Thanks for the suggestions. A few hours after posting my issue I switched everything on and all was as before. I could control the audio input level in system preferences and use the webcam for skype calls as before, using it as the audio and video input device.
Now I have swithched the machine on again and it seems to have reverted back to the same problem as described in my original posting......very frustrating. Nothing registering on the sound input levels in system preferences. Tried restarting several times without success.
The Midi settings for the "Unknown USB Audio Device" i.e. Webcam are as follows:
Source Default (Grayed out)
Format 48000 Hz 1 ch 16 bit
M Channel volume slider is at the mid point, Value 0.49, dB 18.28, Mute and Thru both unchecked
I Channel slider grayed out and all else blank.
Since everything started working again I haven't touched these settings so I assume that they are the same with or without the issue.
I know issues that occur randomly such as this are least likely to find a solution but further suggestions welcome.

Help - Creative WebCam Audio Control disabled

Hi, Just set up my Creative Live Vouce webcam for Skype use and everything is going well but when I select the WebCam Audio Control to play with the different settings it appears to be disabled. No option is highlighted and I can't select any of the options. Any thoughts?Thanks.

Yeah, it's very strange - I've been fiddling with it since; basically I get sound more often than not now when I turn it on.
When I plug in the headphones they always work - the problem seems to be the decoder; it jumps away from the dolby PLII settings to stereo, and obviously coming in through the optical cable there's no stereo...
Could it be something like a dodgy DIN cable, or is it something more serious?
It's become less of an issue now - it only cuts out occasionally, which while annoying is bearable.
Any help would be great.

Audio webcam

Similar Messages

Maybe you are looking for