Audio when importing AVI in Premiere Pro 2.0

Hi everyone,
I'm a bit of a n00b at Premiere 2.0, but I'm slowly learning. When I import an AVI recorded with Bandicam, and try to play it, the video is fine, but the audio comes out as a constant high-pitched whistle, low rumbles, and other odd and garbled sounds, with no hint of the original audio. Can anyone help me with this? Using a clean install of Premiere Pro 2.0 with Windows 8.1.

>AVI recorded with Bandicam
AVI is a wrapper, what is inside YOUR wrapper - Exactly what is INSIDE the video you are editing?
Codec & Format information, with 2 links inside for you to read http://forums.adobe.com/thread/1270588
Report back with the codec details of your file, use the programs below... A screen shot works well to SHOW people what you are doing
https://forums.adobe.com/thread/1070933 for screen shot instructions
Free programs to get file information for PC/Mac http://mediaarea.net/en/MediaInfo/Download
Does your video use a VARIABLE Frame Rate or a Constant Frame Rate?

Similar Messages

  • Importing .AVI to Premiere Pro CS4

    Hi
    I'm trying to edit a video that I got from my DSLR. It's in .AVI format.
    When I import it to Premiere Pro CS4 and tried to play it. I can only hear the audio but the video doesn't play.
    I already tried installing K-Lite Codec Pack but still the same.
    I used Gspot and it says Codecs are installed.
    Hope someone can help me out.

    Having a CODEC installed is no guarantee that an NLE program can use it to edit. This ARTICLE goes into more detail.
    As John T. points out, two very popular versions of the MJPEG CODEC are the Morgan, or the MainConcept, but your DSLR might have come with exactly what you need - but you might need to look on the included DVD for it. Camera mfgrs. often tweak their particular CODEC's, and especially with the MJPEG CODEC. That should be included, but it might be a separate installation, it might install with the camera's driver, or it might install with editing/organizing software. See this ARTICLE for a bit more detail.
    Good luck,
    Hunt

  • Render quality drops when importing sequences from Premiere Pro CS4

    Hello,
    I have both AE and Premiere Pro CS4, and, because my Media Encoder doesn't work (a common problem, apparently), I import my sequences into AE to render. However, I've noticed a marked drop in quality in the sequence when imported into AE as opposed to when it's in Premiere Pro. It's comparable to a "Full" dropping to a "Half" when changing preview render quality in AE. What am I doing wrong? Is there some simple way to match the quality of the AE Comp (that has the PP sequence in it) to what the original Premiere Pro project has? Should I not be putting the PP project into a new comp in AE before I render it out? Is there another way that can retain the quality of the original Premiere Pro project?
    This is urgent, as I need this rendered by Monday. Any help would be appreciated! Obviously, this is the first major project I've done this "workaround" with. I wish AME worked, but it doesn't for me.
    Thanks!

    By default, the Ram preiew resolution is adaptative and not full quality, as it's just to "preview". You can switch this behavior to full quality, and by default, when you render, it will always be "Full quality" before being compressed by your output module.
    You can check the Ram preview doc and the rendering doc from the AE help.
    Hope that helps,
    Seb

  • Missing audio track when importing video into Premiere Pro CS3

    When I import my M2TS video into the editor there is no audio when viewed in the source.  There is also no audio track when I drag a clip down to the timeline.  Any fix for this?

    I have the same problem with M2TS files in Adobe Premiere Pro CS4. The audio track is there - Adobe Premiere just doesn't recognize it. If you open the same clip in Nero Showtime, Corel Ulead VideoStudio, etc., the audio will be there. The audio is probably multiplexed.
    I have been recording High Definition TV using the Hauppauge HD PVR 1212. About 15-20 % of the M2TS files recorded will be seen as video only clips by Adobe Premiere. The remaining clips will be conformed by Premiere and you will have a Dolby Digital 5.1 audio track. If you convert the video only clips to .MP4 and then re-import them into Premiere you will then have the Dolby Digital 5.1 audio track back and you're good to go.
    I use either Xilisoft or Arcsoft media converters to change to .MP4 files. If you use Arcsoft you will have to render the clip. The files converted by Xilisoft don't have to be rendered for playback.

  • Imported avi crashes premiere pro cs4...sound only on windows movie maker

    Hello all,
    So when I go to import an avi it just crashes premiere pro...but first it turns into a sound only file, then crashes. With windows movie maker it only plays the sound?
    Anyone else have these problems? I don't really want to use other video editors...
    Oh and I'm running Vista.
    Suggestions please.

    I'm sorry I don't have a quick answer.
    From what I can tell
    - Vista X64 uses MovieMaker 64bit
    - MovieMaker 64bit requires 64bit codecs (I think there is an experimental 64 bit ffdshow on sourceforge that might work)
    - However installing 64bit codecs may stop your 32bit video apps from rendering properly.
    I didn't provide links to the experimental ffdshow build cause I didn't try it myself.
    If I were you, I'd give up on getting Movie Maker working for now, and just focus on Premiere pro. ? Since it is a paid application they should provide good support. You can't be alone with this issue. If they require codec information just tell them it's a H.264 video with PCM Audio in a AVI wrapper. Guess a quick snapshot video could be provided if they needed one.
    ps.
    . I'm just a user, not affiliated with Creative)
    (pss... I use Vista x64 as well, and do not get video in moviemaker either)

  • Quality loss when importing/exporting in premiere pro cs4

    Hi, I am fairly new to premiere pro cs4, but have some experience in final cut and after effects cs4, and I have a problem thats been bugging me for awhile.
    I decided to try out premiere pro again [only used two or three times] I made a new project and sequence then imported a screen capture of a game I had on my desktop. when I dragged it into the timeline and looked over the footage it was blurry and not very clear at all, so i just did a quick edit and exported it, thinking the final product would have better quality. turns out the quality of the final product was even worse than it was when i was editing it.
         I used DV-NTSC widescreen 48khz preset and didn't change any of the general settings.
         the screen capture is a .mov file, 114mb, its dimensions are 762 x 502, animation codec, and 4,970 bit rate.
         i used the program ishowu you record my screen, i set it to have a 25 frame rate, max quality, and animation compression.
         I used the youtube widescreen HD preset H.264 format [I had planed to upload it as a quality test.]
    Another question is can i set my own dimensions for the sequence instead of having to choose a preset? I hope I didn't leave anything out, and thanks in advance.
    here's what it looks like before i edited it.
    and heres after:

    I use a lot of 3D animations from Mac-artists, and request the same files, MOV with the Animation CODEC. I have never had any issue with those, in my SD DVD Projects. Not sure what is going on in your case. My guess would be that it's the Scaling to the DV Preset, that is causing you an issue. In my case, the animations match my source footage, 720 x 480 w/ appropriate PAR @ 29.97 FPS, so there is no scaling taking place.
    As for the Frame Size, you want to explore the Desktop Preset. Unlike all the rest, it allows you to do exactly what you want - adjust the parameters to match your source footage.
    Good luck,
    Hunt

  • How Important are ICC Profiles when Importing Stills into Premiere Pro?

    Hello,
    I came across the following troubling language in a review of one of Steven Hullfish's books on Color Correction:
    "I also felt as though the author neglected to give ICC profiles enough attention.
    Granted, they are seldom used in pure video workflows, but there are an awful lot of folks out there compositing still images into video content who need to know how to soft-proof against the right destination space in Photoshop so they aren't surprised by the color shifts they see in their ICC-unaware video software. Surely that should merit a pull-quote of its own somewhere."
    My photos have been saved in PhotoShop in the ProRes color space.  Is this going to cause unpredictablility in how my colors look when shown on a 30 foot screen?
    Is Premiere Pro a type of what this author describes as "ICC-unaware" video software?
    If so, what steps should I be taking?
    Thanks,
    Matt Dubuque, 100 Trees

    Premiere Pro does not use ICC color profiles at all. Photoshop and After Effects do.
    When you are working with non-color-managed applications, it's especially important that you preview your work and check your output on the same sort of device on which your audience will be viewing it.

  • Audio is out of sync when importing mp4 into premiere pro CC, how to fix?

    Earlier versions had this problem, but while I was working with CS6 it was never an issue. Now it is an issue again. It is not simply the issue of audio lagging, or I could fix that by unlinking and adjusting. The audio is fine in some areas, lagging in others. Sometimes it is the video that is lagging and not the audio. The clips are perfectly fine outside of Pr.
    Dimension: 1920 x 1080
    Codec: H.264, AAC
    Duration: 14:28
    Audio Channels: 2
    Please help me figure out what is going on? I would hate to have to begin reencoding all of the files of this camera, just because of such a glitch.
    Thanks
    Tiff

    If you provide video file details, someone may be able to help
    Report back with the codec details of your file, use the programs below... A screen shot works well to SHOW people what you are doing
    http://forums.adobe.com/thread/592070?tstart=30 for screen shot instructions
    Free programs to get file information for PC/Mac http://mediaarea.net/en/MediaInfo/Download
    Are you 100% sure that your editing sequence matches your video file... such as by using the New Item process?

  • No video, only audio when importing .avi file into CS2

    I recorded 920p footage on a GoPro Hero 3 at 50fps. GoPro recordes MP4 files, I wanted to edit the footage in PP CS2 as it gives me more control than GoPro studio.
    I used GoPro Studio to convert the MP4 files into avi files and amended the white balance and saturation etc, as I recorded using Pro Tune which gives a flatter colour profile.
    The avi files run well in Windows Media Player (although don't seem to have the clarity of video's on the GoPro website!)
    I have then imported the avi files into CS2 to put together the edit and I can only hear the audio and can't see the video in the source stream or the program stream.
    I assume I have a setting wrong in CS2, could any one advise what I need to change to get the problem rectified?
    I was planning on exporting the finished problem at 720p if makes a differance

    Also, CS2 has a different forum http://forums.adobe.com/community/premiere/premierepro_previous

  • No audio when importing to Quicktime 7 Pro

    I have looked for an answer in the forums but can't find one. I have an older MiniDV camcorder I am trying to get some video converted to digtal media. The videos play great when I watch them on the camcorder audio included.)I am using the firewire output and first tried iMovie (version 10.0.2) (I am on Mavericks). I was able to get video an sound but the video was so choppy it was just hard to watch, the audio with the video was OK, just choppy where the video kicked out. So I then downloaded Quicktime 7 and bought the Pro version and I was able to import the video with no choppiness at all but there was no audio. I have tried setting the microphone in the preferences to the camcorder and I have tired the different formats including raw but I still cannot get the audio to go with the video.
    Any suggestions would be greatly appreciated.

    The reason I think this is worth trying... A G5 should have enough processor speed, but it lacks a graphics card that can offload the processor for some of the heavy lifting...therefore less resources available for audio.
    Also, I would recommend that you create a duplicate of your project and cut it down to about 5 minutes or less (go to Project Library. Right-click on project name, and select Duplicate). Then you can test this without waiting 4-5 hours.

  • How do I get audio back on single clip that loses audio when imported into Premiere Pro CC?

    I've got one clip out of many that for some reason won't play any audio when imported into Premiere Pro.  I am new to Premiere Pro so am hoping it's something stupid I've done, but this is a problem with just a single clip exported the same way as all my others, the original audio is loud (not quiet) and none of the FAQ issues seem to apply (ie I haven't muted the audio or anything stupid like that)
    The clip was exported from Plural Eyes into a "master" Premiere Pro project where the audio is fine. I exported it as a short MP4 clip and if I play the clip in Windows Media Player the audio is there loud and clear.
    But when I import the clip into a fresh Preimiere Pro CC project this clip appears with just the "film strip" icon on the far left in the Timeline panel, unlike other clips which have an icon that shows "film strip" in the background and "audio wave" in the foreground.
    I'm hitting so many glitches with the CC editions of Premiere Pro and After Effects which have annoying inconsistencies between them I'm tempted to just go back to Sony Vegas Pro (single program, no hassle) but hoping most of these issues are down to "newbie incompetence". Very hard to understand why this one clip out of many should be giving me this specific problem though. Any ideas?

    I'm getting so many weird results. Most go away by simply closing the project and re-opening and I only have 6GB memory but even so, I'm disappointed by what I thought was supposed to be more "world class" video editing software than Sony Vegas Pro which I found to be a lot more stable. Also struggling with differences between Premiere and After Effects. Every time I want to do something in Pro I seem to need to go to After Effects and vice-versa. After Effects lets me do more of what I could "just do" in Vegas Pro timeline, but it's hideous for lining up audio and having to render anything in RAM to even get a clue as to what a change has done.  Need to add Audition to the long list as well I suspect. Fun times!

  • AVI audio not heard in VLC & Premiere Pro CS6

    Hi!
    I have an avi and Premiere Pro doesn't allow me to import it. The avi's audio is G.723 ADPCM codec and Premiere and VLC don't get it - the audio can't be heard. The only program in which I can hear the audio is Media Player Classic.
    When I converted the AVI to mp4 the video worked fine and imported to Premiere but the audio wasn't even part of the file. When I imported the mp4 file to Audition it didn't show me the audio file.
    How can I fix it?
    Thanks

    Read Bill Hunt on a file type as WRAPPER http://forums.adobe.com/thread/440037
    What is a CODEC... a Primer http://forums.adobe.com/thread/546811
    What CODEC is INSIDE that file? http://forums.adobe.com/thread/440037
    Report back with the codec details of your file, use the programs below... A screen shot works well to SHOW people what you are doing
    http://forums.adobe.com/thread/592070?tstart=30
    For PC http://mediainfo.sourceforge.net/en or http://www.headbands.com/gspot/
    For Mac http://mediainspector.massanti.com/

  • CS4 - no audio when importing an avi or mpeg

    Hello I am trying to figure out why there is no audio when I import an avi created with Fraps. The audio is in the avi made from Fraps but when I import it to premiere pro CS4 - there is no audio during playback. I checked all the audio hardware settings, I dont know what else to do.

    While not particularly FRAPS, this ARTICLE will give you some pointers on other video-capture programs.
    As John points out, there are several FRAPS threads to draw from too.
    Good luck,
    Hunt

  • Impossible d'importer un .avi dans premiere pro CC sous mac

    Bonjour,
    Quand j'importe un fichier .avi dans Premiere Pro CC, il m'indique "codec manquant ou indisponible". Je suis sous Mac, Maverick. Comment puis-je solutionner mon souci ?
    Merci de votre aide

    First, you need to ask in http://forums.adobe.com/community/premiere/content
    Second, when you go there, you need to provide more information
    AVI is a wrapper, what is inside YOUR wrapper?
    Codec & Format information, with 2 links inside for you to read http://forums.adobe.com/thread/1270588
    Report back with the codec details of your file, use the programs below... A screen shot works well to SHOW people what you are doing
    http://forums.adobe.com/thread/592070?tstart=30 for screen shot instructions
    Free programs to get file information for PC/Mac http://mediaarea.net/en/MediaInfo/Download
    This forum is about the Cloud as a delivery process, not about using individual programs
    If you start at the Forums Index https://forums.adobe.com/welcome
    You will be able to select a forum for the specific Adobe product(s) you use
    Click the "down arrow" symbol on the right (where it says All communities) to open the drop down list and scroll

  • CS4 I have created compositions in After Effects CS 4 but when I import them into Premiere Pro CS4

    CS4 I have created compositions in After Effects CS 4 but when I import them into Premiere Pro CS4 they only appear in the monitor when the play button is activated. The other clips appear without a problem. I noticed that the same situation arises when I dynamically link to Encore CS4. What am I doing wrong?

    Thank you Ann. But the problem is when switched on the AE clips on the timeline are only viewable when I start the project (ie press the space bar) and as it also doesn’t appear in Encore I am afraid to spend a great deal of time creating a DVD with these clips not appearing. Any advice?
    Regards and again many thanks
    Stanley

Maybe you are looking for