Audio will not conform in Encore CS5

I had to replace the audio file in Encore CS5 as it wouldn't fit on a 4.7 DVD. I exported out of Premiere Pro and rendered as an ac3. I have replaced the asset in Encore CS5 but it will only conform about 1/5 of it and then stops. Any ideas?
This is the info from MediaInfo
General
Complete name                    : D:\ADS\Watts VA evening\WattsVAafternoon.ac3
Format                           : AC-3
Format/Info                      : Audio Coding 3
File size                        : 141 MiB
Duration                         : 1h 42mn
Overall bit rate                 : 192 Kbps
Audio
Format                           : AC-3
Format/Info                      : Audio Coding 3
Mode extension                   : CM (complete main)
Duration                         : 1h 42mn
Bit rate mode                    : Constant
Bit rate                         : 192 Kbps
Channel(s)                       : 2 channels
Channel positions                : Front: L R
Sampling rate                    : 48.0 KHz
Stream size                      : 141 MiB (100%)

Glad to hear you've got it finally working.
To avoid rerendering in Encore i do my exporting in Premiere.

Similar Messages

Purchased a TV show in itunes...can only hear audio, will not display video

at 1st....
Purchased a TV show in itunes...can only hear audio, will not display video
now...
shows the show is 48 min but then is only 30 seconds once opened

Hello piff316,
Thanks for using Apple Support Communities.
For more information on this, take a look at:
How to report an issue with your iTunes Store, App Store, Mac App Store, or iBooks Store purchase
http://support.apple.com/kb/ht1933
Best of luck,
Mario

ITunes 11.01 on Windows 8 audio will not sync with video

I have a new computer that is running Windows 8, and I have had no issues with iTunes 11.01 thus far on it other than the fact that when playing videos, the audio will not sync up with the video.
With the ineptitude that seems to define Apple as of late, there does not seem to be any actual support for Windows 8, and the "support" channels do no good at all.
Any ideas as how to fix this problem?

I think Microsoft made the Windows 8 incompatible with Apple products on purpose, they want windows users to have to download apps from their paid service which is more expensive than Apple's App/iTunes Store

Mac DVD Superdrive not recognized in Encore CS5

I'm trying to burn a DVD using Encore CS5 on my new Mac Pro. I already spoke with Apple to troubleshoot to see if it was the drive. It was not the drive. Therefore, there is a problem with Encore not recognizing the drive. In the destination window in Encore, where it says "Recorder" in the build tab, it says "None Found". Anyone know what the problem is?

Well, in the WINDOWS world some software will cause Encore to not be able to "see" a drive, so read the links below... I don't know if the same kind of thing happens in the MAC world
Things and Software to AVOID when authoring/burning a DVD
Start --> http://forums.adobe.com/thread/608660?tstart=0
#2 here has WHY Explained http://forums.adobe.com/thread/607390
Plus http://forums.adobe.com/thread/562941?tstart=0
Again in the Windows world, if the user can't or won't remove the offending software for some reason, the solution is to have Encore build the project to hard disk (folder or create an ISO) and then use 3rd party software to burn the folder or ISO to DVD
Added
In fact, just go ahead and tell Encore to write the project to your hard drive and then use other software to write that output to a DVD... if that works, you know that "something" is getting in the way of Encore being able to communicate with your drive

RAM preview audio will not play through bluetooth headphones

I am using bluetooth headphones (Jaybird Freedom Sprint) to try and edit audio/video in after effects. However, when I go to Preferences>Audio Output Mapping and choose "Freedom Sprint" and click OK, close the preference window, and it will automatically go back to the default "Built in Output" when I open it back up. It will only play the sound through the Mac Pro tower I am using. Is there a way to get the headphone option output to stay permanently?? Is there a reason why it is not staying selected? Another thing I forgot to mention is that all other sounds work (like iTunes, volume up/down) through the headphones except for the audio RAM preview in After Effects. How can I disable the audio from playing through the tower? Very frustrating!
BTW - the only time headphones actually work is when they are plugged into the tower. These ones obviously can't be plugged in.
Thanks! (Screenshots provided for help)

Thanks! I definitely did try that first... (trying to find a solution with the headphones). You can't find any info about them online/their website. Regardless though, After Effects will not allow me to play the audio output through any other device except for the Mac Pro tower - even playing it through the LCD Cinema Display won't work.
Thanks for your reply

Audio will not transmit to TV via Displayport

Please read carefully as I have spent 8 hours on this issue and if you have a simple answer, I have probably already tried it. I want to explain the problem in full detail and get some real tech experts to help. Thank you!! The first thing you need to know about the Lenovo Thinkcentre 6234-A111 is that there is no HDMI output. There is a displayport output. Therefore, I bought this adapter: http://www.walmart.com/ip/V7-DisplayPort-to-HDMI-Adapter/29530877 I then ran an HDMI cable to HDMI 1 on my TV. The picture transmits. The audio does not. I have already tried the following common "solution:" 1. Right click audio icon2. select playback devices3. Right click in blank area to make sure that disconnected and disabled devices are showing After performing these steps, there should appear a TV icon called HDMI audio. You should then be able to set this as the default. The problem is that this TV icon does not appear. There is also no option for HDMI audio in the device manager. I have determined that the thinkcentre refuses to recognize that my TV has speakers. It only recognizes my TV as a monitor, which shows up as "generic PnP monitor" under device manager. Please tell me how I can force my computer to recognize the audio device attached via HMDI cable via displayport adapter. Thank you for your help! I am desperate. If this does not work it means time & money wasted.

I am adding to this thread to hopefully help others with the same issue. I found the exact model (M58P) and type (6234) of my PC here: http://support.lenovo.com/us/en/products/desktops-and-all-in-ones/thinkcentre-m-series-desktops/thinkcentre-m58p/documents/PD000963?tabName=ProductParts. The type of computer (in this case, 6234) is incredibly important because it tells you whether you require an NVIDIA graphics driver, or an AMD Radeon Graphics Driver. In this case, my PC runs on an ATI Radeon HD3470 256M PCIe Graphcis card. This type requires a graphics driver for the HD 3000 series. After much browsing, I found it: http://support.amd.com/en-us/download/desktop/legacy?product=legacy2&os=Windows%207%20-%2032. From what I can tell, my PC does not currently have a Radeon Driver, which is completely bewildering. Windows 7 is supposed to do this stuff for me automatically. Somehow the Intel Chipset is running my integrated graphics card, but not allowing audio through the displayport. I am not home, but I am very excited to try out this Radeon driver tonight. Does anyone know if this can run side-by-side with the Intel G43-G45 chipset (under display adapters in device manager), or will I need to uninstall that chipset before I can run this Radeon Driver?

"sent audio" will not open

Hi
In FCP, Im trying to fix up some audio. Sent the clip to Soundtrack pro (STP) but STP says error "cannot open render.mov"
any suggestions?
I also tried opening the file directly - eg "open in editor"didn't work
also tried changing the extension to ".wav" which didn't work either.
I also posted this in STP forum - dont know which program is the culprit at this point.
I was able to get it to open as a multitrack project, then changed that to an audio file, but after that, I can only save the file like an orphan - it will not update the section in FCP which means I would have to attempt to match the audio to the video - lypsync frame by frame which never works right.
there must be a simpler way?

If it is an IMAP account you might have to wait for an update/synchronization of your actions on the server.

.ai Files will not open when Illustrator CS5.5 is already launched

Greetings,
I have a user using Windows 7 Pro 64-bit having issues with Adobe Illustrator CS5.5. When the user attempts to open .ai
files stored on her local machine, the files will not open if Illustrator is launched. It will show an hour glass briefly as it is
about to open, and then nothing happens. If she closes Illustrator and tries to reopen the same file, it will launch Adobe
Illustrator and the file will open. She can also open files through illustrator. It just wont open .ai files when illustrator is
already launched. This is happening when she is running illustrator as an adminitrator, and as well as when she is not an adminitrator. Any ideas?

Any specific security tools running? Team/ workflow management software? Virtual desktops? License managers? Sometimes this stuff simply blocks local ports or wants files to be opened from within once certain things are running... Otehr than that this could be something with group policies or mundane user privileges issues with different contexts, i.e. your AI also has permissions for a specific server-side user/ policy, which the local user otehrwise doesn't have and then it's not allowed to open files into that secured loop...
Mylenium

Cp6 - Audio will not continue using Button

Hello;
I have researched the audio / Captivate section of this forum but cannot find the answer. Here is the issue:
I setup a button to open a URL. I want the slide to pause while the user reads the info in the url. The only way I can get the audio to stop is to select "stop audio when paused" box. All is well until I want to continue.
I have a click button setup for "continue" . When this button is clicked the slide continues but the audio does not. It would seem that there should also be a box that allows for audio to "Start".
Any help is appreciated.
Regards;
Rick

Hello Anjaneai;
This has been a curious issue. After many repeated attempts any many permutations of the button settings in the properties box, the audio continued to play.
However in the past when I have issues such as this, I try to duplicate the problem in a new project. So when set up the exact same conditions in the new project I could not duplicate the audio problem.
So it seems that this is a "one-time" isolated issue in that I could not duplicate the audio problem in the new project. To further investigate I removed all audio from the old project, and for some unknown reason the audio continued to play. (I did ensure that it was not inserted as a project background audio).
In summary I cannot duplicate the audio play issue in the new project and all appears to be functioning well in the new project.
Thank you very much for responding and I will let you know if I have the issue again.
warm regards;
Rick

Image Processor will not save files in CS5

I use image processor to run actions on a bulk group of image files, always worked fine in CS4. Now with CS5 the files have the action applied but Image Processor will not close the files.... that becomes a problem when I am working with a couple hundred images! It seems to save the files fine, into the Jpeg or Tiff folder it creates during the process... it just won't close the files and give me the error: "Sorry, I could not process the following files:"
I am sure this is a bug, since it works fine in CS4 and the process is exactly the same in CS5. Does anyone else have this problem? Is there anyway to fix this? It's a pain to go back to CS4 just to use the image processor.
Thanks!
Chris Kilkus
www.kilkus.com

I looked into it more and found the problem is that when the action runs Photoshop for some reason won't let the file save from the file menu (it's grayed out)... only "Save as" which obviously doesn't work in an action. Strangely, the file does actually get saved in the folder that is created by Image Processor, but since "save" is grayed out, it won't CLOSE the file. There is no reason for it to gray out "save", when I play the action one file at a time it doesn't do this, only when I use Image Processor in CS5. I really don't understand why it's doing this, I think it's just a bug that needs to get fixed. Don't have the same problem in CS4.

Audio will not load into PRE 7

I just bought a Canon Vixia HF R10 Camcorder. It records audio in Dolby Digital Plus. It is hard disc High Def. When I import the files from the camera into PRE 7 the audio does not come with the video. I know the audio is making it into my computer because the files play fine in windows medio player. I get the video from the file into PRE 7 but no audio at all. Can anyone help?

Glad to see that you posted here, and welcome to the forum.
Let's start with a few questions:
When you run the AV files from the camera through the great, free utility, G-SPOT, what does it show, especially for the Audio CODEC, and channel-count? A screen-cap of G-Spot would be very useful.
If you Import a WAV file (like one of the sounds from Windows) into PrE, do you get Audio there? This is but a test, of the Audio Hardware settings.
What is your Project Preset?
Good luck, and many others will be by soon.
Hunt

Audio Will not export for clips longer then one minute

I am running adobe premiere pro cs3 on my HP Pavilion. i run windows XP service pack 2.
Until recently i had no problem but the other day I tried exporting from adobe media encoder under these settings:
Format: M-PEG 2
Widescreen 16:9
NTSC
The bit rate varies. I've done larger bitrates and smaller bitrates. it doesnt help.
And suddenly it would render my full video with an mpg extension but there was no audio. I ran it again but shortened the size of the clip, and it came out perfectly fine, audio in tact. lengthened the sequence again and it wont export audio. its not that the audio box isnt checked, and its not rendering the audio as a seperate file like it used to. I do a LOT of editing and run my own online show, so it is very important for me to be able to render these videos like this. I could always render as AVI but that takes up soooooo much space, and most of the other formats are too low quality for me to import again and edit, or even just to upload for people to see. can anyone help me?

Yes, HDD = Hard Disk Drive. One often sees it listed as HD, but that can also stand for High Def, so I use the HDD abbreviation myself.
Now, how you have things set up, that 15GB of free space is probably not nearly enough. This is especially if one has their Windows Page File dynamically managed by the OS (default method), as it is very, very likely that the Page File is filling up the remainder of the HDD.
If everything is on the external, media, Project, Scratch Disk, Export folders, etc., one might be able to squeak by with that overloaded HDD, but I need to point out - at about 75% of capacity, the HDD's performance will start to slow, and this will intensify, as more is used. This overfilling can result in failure. I would look into cleaning up the C:\.
Also, when video editing, a 2x physical (not partitions) HDD setup is the bare minimum, and a 3x HDD setup is even better.
Some get around this, a bit, by using eSATA externals, which will be almost as good as the internals. Not sure that I would recommend any other connection type though. I use FW-800 externals, but have a minimum of a 3x internal on my laptop and an 8x on my workstation, so there's always plenty of internal storage. I just use the externals, to migrate the Projects between my computers.
Good luck, and pay really, really close attention to that filled C:\.
Hunt

Video Audio will not stream via express

Hi - Using iTunes, I am able to stream music and podcast audio to my Apple Hi-Fi speakers via Airport Express. However, VidoeCast, TV Shows and purchased movies will not stream... am I doing something wrong? Is there a workaround?
hevans

Streaming movie audio only is quite different from streaming both audio and video. The problem comes in the prebuffering that's necessary to keep the audio from skipping, which makes the audio lag behind the video. To keep them in sync, the AirTunes protocol would have to be considerably more complex: iTunes would have to be able to advance the video ahead of the audio by a predictable amount to ensure that they don't fall out of sync. I can see Apple's point for not supporting it since the Express is intended as an audio device and was never intended for the audio associated with video.

Audio will not render

I've googled this problem with no solution. When I select any variation of the Render Audio/All commands, the progress bar flickers on screen at 0% then closes. The audio remains unrendered as does the red bar above it. I cannot render any audio regardless of the type (music, dialogue, etc).
Previous projects can play their already existing, rendered audio. Any new audio introduced will not render, regardless.
Currently, I have to export the audio to Soundtrack and export the track as an AIFF to render it. This works, but it's slowing me down.
I've checked my scratch disk, and I still have 28 GB of space left. My projects are small and any audio rendering shouldn't require much horsepower.
I'm using FCP HD Express 3.5 on an iMac G4.
Thanks in advance for any help you can give me.

Thanks! Your suggestion did the trick. The tick wasn't there, and it forced me to examine the other Render options. I selected "Render Only" - red bar and it worked!

Bluetooth audio will not connec with OS 4 upgrade, but work well with OS 3

The bluetooth with the OS 4 upgrade will not connect with my car stereo, but OS 3 worked well. The iPhone will connect with the bluetooth handsfree connect with the stereo, but not the audio. In short, I am no longer able to listen to the iPhone's iPod music, or use the navigation app through my stereo. Frustrating... I have done a soft and hard reset, as well as talk with 'Crutchfield' regarding the problem. The problem presents to be an issues with OS 4. What solutions are available?

I'm having this problem also. Bluetooth audio works fine with my motorola headset or phone "hands free" connection to my ford exployer but does not work with ipod function nor navigation app. Since this is my first iPhone, I don't know if everything worked with OS3.

Audio will not conform in Encore CS5

Similar Messages

Maybe you are looking for