Audio with clicks and clucks

Hello, I have THL W200S (MTK6592 with 1GB RAM) with stock 4.2.2 ROM. When i start a call i hear sound and voice with strange clicks and clucks (like if the process is too heavy for the hardware to handle it) but if i switch to loudspeaker or headphones everything is ok. My wife has THL W100 (MTK6589 with 1GB RAM) with stock 4.2.1 ROM and she has no such problem.

I tested it on my second phone Alcatel One touch Pop C1 (MTK6572 with 512MB RAM) and there is no such problem.

Similar Messages

Getting static audio with Titanium and Vista x64 at random times

@Getting static audio with Titanium and Vista x64 at random times$ I have had this card for about 6-8 months and relati'vely no issues.
I just upgraded to the latest drivers 270006 and now, sometimes after exiting Turbine's Lotro, my audio plays but is very static-y, but it doesn't happen all the time. I had iTunes minimized when playing Lotro and then went to play a song after exiting. I quit iTunes and tried it again and it was ok.
This also happened in Firefox, a YouTube video had the same static audio.
It doesn't happen all the time and I do play other games, but I haven't been playing much else right now.
So right now I don't know if it's a Lotro thing or just the drivers.
I have a Q9650, single GTX260, Asus P35 board (not SLI), Vista x64, 4GB.

Carl, do let us know on the Safe Mode test... would be the first thing I'd try with what you've mentioned, but yeah, daisy chained Hubs could possibly play into it.

Family Sharing with Click and Buy not possible

why Is it not possible to pay with Click and Buy i don't understand that. Meanwhile i've read that some people didn't have a Problem.
May be somebody can give me an answer.
Tx and greetings from Vienna

It should be possible but for me it isn't.
I'm going to try to enter a CC then setup and after that turn back to click and Buy.
Family purchases and payments

Audio pops/clicks and optimum setup

I've recently begun to use CC to create small video's which will be posted either to YouTube or FB. These are NOT for commercial purposes. I also incorporate audio music into the videos. I use ProTools to create high quality WAV files which I then import into my video project as audio. I'm finding that there are clicks and pops when playing back in CC. This is "before" any rendering. And, of course, it also appears post rendering as well. I wanted to know if anyone could recommend the optimum setup, editing and rendering. My most recent project which incorporate some imagery uses 25" w x 15" tall at 240dpi using TIFF's. Since YT and FB compress, I'm using 1280x720 when I render. Any optimum setup recommendation?

And what audio files? This sounds like you are simply hoplessly overdoing it and use excessive sample and/or bit depth rates that PS is less than able to deal with properly... And DPI and realworld units are irrelevant for video. Only absolute pixels matter.
Mylenium

How do I create an object with "click and drag" interaction?

I want do make an object that I can move around the screen at will, so, I need a way to make a click and drag object in adobe edge.
I also need this to work with touch devices and also to limit the movement of the object to one direction (x or y).
Thank you all in advance.

Thanks for your reply. I tried doing what you said, creating a command by opening a new flash file, etc. For some reason, I could make a rectangle and save that as a command, but making a shape using the polystar command didn't work - there was a red "x" next to it in the history panel.
Anyway, even if I could do that, it's not what I want to do. I want to be able to create a shape and then be able to change the shape dynamically. For instance, I want to be able to create a series of points and draw curves between them to create a closed curve shape. Then I want to be able to change the positions of the vertices so that the shape changes as the .swf is running. Thanks.

I'm having a problem to link itunes with click and buy

i'm trying to get a connection between click and buy and itunes but it doesn't work every time it makes a connection with itunes via the web and he's loads first time and then he doesn't do anything but i still can buy something

iPad Charging
"The fastest way to charge your iPad is with the included 10W USB Power Adapter."
If you believe there is an issue with the Supplied Charger, take it and your Device, to An Apple Store or AASP and get them to check...
Meanwhile, have you tried a Reset of your iPad... you will not lose any Data...
Reset
Press and hold the Sleep/Wake button and the Home button at the same time for at least ten seconds, until the Apple logo appears. Release the Buttons.
http://support.apple.com/kb/ht1430

QT7.3 (no audio with MBox and Core Audio Manager)

Just updated to QT7.3 but it doesn't seem to be compatible with M-Box's Core Audio Manager (Pro Tools LE 7.3). I can't play audio through the M-Box. No problems with 7.2. So until my Core Audio software is upgraded, is there anyway to re-install QT7.2?

Hi desst17795,
Make sure the XP end has Tuned the app to the camera and mic.
The link is in a blog style and they need message #570 onwards. It also was written for AIM5.5 and the access to the prefereneces is now in the Buddy List menu items.
If this does not work then they should do this:
Their preview is the rear of the two tabs where they see your pic. They should click on this to bring it to the front.
There is now a small icon to the right.
Click on this.
A slider should appear.
This should be moved to the left.
If you have the Connection Doctor open (in the Video menu of iChat) you should see the framerate and bit rate go up.
At your end you should go to System Preferences > Sound > Input tab and make sure the correct mic is selected and the volume is adusted to move the response bars to at least halfway.
In iChat > Preferences > Video section > Microphone drop down you should ensure the same mic is selected and theat the response bars move when you talk.
In the Video menu bar item you should also check that the Micorphone Enabled item is ticked.
You are right that iChat to AIM 5.9 can not do Audio only chats (Unless part of a One Way video chat)
11:20 AM Friday; July 7, 2006

NO Sound or Audio with Bootcamp and Windows XP.

I have been trying to get this solved for months with no success. Everything I have read here . . . no one seems to know how to solve this problem from all the other sound problems I have read.
I have a MacBook and IMac with Core 2 Duo. System 10.4.9, Bootcamp 1.3 (June'07), Windows XP. Neither has the sound working with any program. I have reinstalled all the drivers 3 or 4 times. The "Sounds and Audio Devices Properties" from the control panel icon says "No Audio Device".
Can anyone help? Please?!?
iMac Intel, MacBook Intel, Power Pc Mac OS X (10.4.9)
iMac Intel, Power Pc Mac OS X (10.4.9)

You may have better luck getting an answer if you post your question to the Apple Bootcamp Beta Discussion forum. This forum relates to using AirPort for Windows, which you didn't state as an issue.

Share audio with screenshare AND keep the micropho...

Hello,
I need to use Skype for the following: I teach music production courses over Skype and I need to be able to share sound between our programs via screenshare. Yet I also need my microphone to work for communication.
I have found audio sharing possible via SoundFlower, however it disables my ability to use the microphone on Skype.
Is there a way around it?
Thanks.

B33 wrote:
i thought when you had Unlimited plans like i do and my Line is coming up for Renew in February as i was told to get a new phone and keep my Unlimited i would have to Pay full Price for it). If i want it at a subsidized price i would have to go with a different plan and drop my Unlimited) I'm just a little fuzzy on this that's why i'm asking b
That's correct and has been discussed on this forum in tons of threads. If you have unlimited data and want to keep it (at least for now), your choices are:
pay full retail price for a new phone at Verizon
buy a phone from somewhere like swappa or ebay (somewhere that doesn't require a new two-year Verizon contract)
get a subsidized phone from Verizon, sign a new two-year contract, and switch to a tiered data plan (i.e., 2 GB for $30); this applies if you're currently on a Nationwide plan ... older plans may force a switch to the Share Everything plan
if available, upgrade another line on the account and move that phone to the unlimited line (of course, if that line also has unlimited data, it will be lost)
add a line to the account for a new subsidized phone, move the new phone to the unlimited line, and put a basic phone on the new line and drop the data plan (of course, that would involve paying a monthly fee for the additional line,and the ETF would be based on the smartphone purchased, not the basic phone on the line)

Cannot have audio with iChat and AIM

Hi,
I am trying to use iChat with friends using AIM (on PC).
But I have never been able to start an audio session with someone (exchange of text messages is Ok).
The "button" with the phone remains grey (not active). So I cannot start an audio session after contact selection).
My microphone is Ok (Audio is Ok with other tool like Skype).
Also, in the contact list, I dont see any audio logo in front of their names, even if they are online (and then able to have text chats).
When PC/AIM friends want to start an audio session with me, they get the following message "[email protected] is not accepting Talk invitations or does not support the Talk feature."
What can I do ?
More details on my configuration :
I have an eMac with MAC OS X 10.3.9 and iChat 2.1(v153)
I am using the micro integrated somewhere in the computer.
In networking system preferences,
the Mas OS firewall is not activated (should be activated with appropriate ports ?)
and no service is activated (some services should be activated ?).
Can you help ?
I would like to do have also video with friends but I would like to be able to do audio before !
When I see all problems in the iChat discussion, I am a little bit afraid ...
Does iChat 3 could be better ?
Thanks
Gerard Morisset
email : [email protected]

Hi Gérard,
Welcome to the Apple Dicussion Pages
See this FAQ
You will see it says (near the bottom ) that Audio only chats can not be done from AIM (on a PC) to iChat.
Trillian Basic does allow Audio Chats from PCs to Mac usiing the same AIM servers (Smae names will work). They also do a Pro version that will do Video as well (costs $25).
AIM are also working on Triton which is supposed to add this feature. (See link under the yellow DONWLOAD Now button).
Your friend can download a beta of this if he wishes but it is a very early version.
Ralph

Record audio with labview and audio dataplugin

The thing I would like to do, is write waveforms to WAV/wma/mp3 files.
The way to do this, is probably with the help of the audio data plugin.
However, it is far from clear how to configure and use this plugin with LabView. There is documentation available for DIAdem, but what good is that to me, as a simple LabView user?
There is also an example for reading dataPlugin data with LabView, but this example is:
A) not working, e.g. it cannot open a simple WAV file, when using "uspAudio" as DataPlugin Name
B) not documented
C) not handeling errors
D) only reading, not writing, which is slightly more complicated.
So, tips for writing waveform to audio files and/or
tips for working with dataPlugins in LabView would be welcome...

Ok, so, now I can read a WAV/WMA/mp3 file, see attached VI
There's still one problem: writing data to a WAV/WMA/mp3 file. In my "DataPlugin Write Audio File.vi" I try to read from / listen to a microphone connected to a AD card. On the Waveform graph, I see my signal correctly, but in the WAV file, there is only a flat line (zero's).
Perhaps it is needed to add properties to the group, but I don't know which properties to add...
All advice is appreciated...
Message Edited by bram@tno on 08-08-2007 07:00 AM
Attachments:
DataPlugin Load Audio File.vi ‏46 KB
DataPlugin Write Audio File.vi ‏229 KB

Capture audio with microphone and save to disk

Hello,
I would like to know if there is any way to record audio from
user's output? Let's say I capture it using its microphone, and I
want to create an audio file with it, or a swf file or whatever
file it is. I need to save that audio for further playback. Can
someone point me in any direction!? I have been surfing on this
topic but I didn't find anything, apparently it can't be done, but
I would love otherwise.
Thank you,
JCA

Yes that's the way it could work. FMS is designed for
streaming audio, video and data around keeping things synchronised
in real time, but it can save the streams to be played back later
as well.
It would be an expensive solution if that's all you want to
do.... there is an open source 'version' in development... called
red5, but I think you need to know how to program in java, although
I'm not sure.
Or you could look at adobe connect/formerly macromedia breeze
- It prebuilt and is a pay for use service, but does much more than
what you're looking for. I'm pretty sure you can custom logo it
etc. You might want to try the free trial account and check it
out.

Popping in audio with FCPX and Lion fixed?

Back in November 2011 i bout an iMac it came with Lion OS on it. I use Final Cut Pro X to edit videos and it didn't take long for me to realize that there was a major issue with the audio popping in FCPX while running Lion. Short on ideas and nowhere to turn, I went to the apple store and they downgraded me back to snow leopard and there were no problems with audio in FCPX. That was a while ago and I was wondering if anyone know if this issue was addressed in upgrades? I want to go back to Lion but fearful after the hassle before. I know that there were other work around options for me but I did what I had to do to make my video editing work. Has this been fixed? Is anyone running Lion and FCPX with no audio popping without changing the audio formats? Thanks.

Sorry, that should be 'extracted the audio to an aiff file. (Why is there no edit?)
For the original post is the edit in the panel to the right of the post, but only for the first fifteen minuts. After that, the edit-window will be closed

7921 to 7921 Calls Have no audio with UC540 and AP541n

We have a new deployment where we have 5 total 7921G wifi phones connected via 2 AP541n access points, one connected to a ESW520p switch and then to the UC540 and the other connected directly to the UC540. The wifi phones are intermittently giving no audio when calling each other, however, calls to the PSTN consistently do have 2 way audio. Is this a security issue perhaps? We are running the latest CCA software pack as this is a brand new deployment, also the AP's were upgraded to the latest firmware. HELP.

I have also tested this scenario in the past and I found that phones associated to the same ap
did seem to have a higher incidence of the one-way audio condition but not every time. We have 3 4404 controllers and I did note that every time I a complaint the phones involved were on the same controller. I could not reproduce the problem EVER if the phones were associated to aps on different controllers, TAC assured me that this was unlikely related to the issue but I have my doubts. Since upgrading the phones to the latest firmware 1
.3.4SR1 initially I was still getting complaints of the condition occuring so I decided to reboot the POE switches involved with the problem areas since they had in some cases been up for 2+ years, this was just a last ditch effort but for whatever reason that seems to have cleared up the issue. I have not had the issue reoccur in the past 2 weeks since rebooting those switches, I also believe that some of the phones in question had not yet received the update and because of this I was getting false reports of upgraded phones still having the issue. I found two seperate cases where one of the phones in question still had 1.3.3, after forcing the upgrade they were fine. So first thing I would do is make sure the phones have 1.3.4SR1, then I would check to see how long the switches connected to your AP's have been up and also perhaps the IOS version, if they are Cisco switches it may not hurt to contact TAC and see if they can recommend an IOS that would be a good candidate. Another thing to make sure is that your QoS settings on all the switches involved are set correctly. We had tons of problems initially when we first started using the phones on the wireless network. We thought our QoS was set correctly but what we found was there was some IOS bugs on some of the switches downstream that required special switchport commands to "fix". Most dealt with the qos trust dscp command, some switches had to have the dscp tag and some had to have the cos tag, very strange and it took several CCIE's several days to come up with the final solution after many wireshark traces to make sure the QoS tags were making it all the way through.
Watch, now that I am writing you that my problems seem to be fixed, I am sure Murphy will raise his ugly head and ruin my Friday

No audio with iSight and Macpro and 10.6.4...

I'm trying to get this iSight firewire unit to work with my Macpro running 10.6.4 for a skype video conference. I get video in skype but no audio.
I've tried searching, but haven't found anything. There is an isight updater, but it doesn't work on 10.4 or later.
Any ideas? Searching on my entire mac for the word "isight" brings up 0 results so I'm thinking I need some kind of software to get it working right.
[IMG]http://img688.imageshack.us/img688/3759/appleisightfirewirewebc.jpg[/IMG]

rhythmdevils wrote:
I'm trying to get this iSight firewire unit to work with my Macpro running 10.6.4 for a skype video conference. I get video in skype but no audio.
I've tried searching, but haven't found anything. There is an isight updater, but it doesn't work on 10.4 or later.
Any ideas? Searching on my entire mac for the word "isight" brings up 0 results so I'm thinking I need some kind of software to get it working right.
Hello rhythmdevils
External iSights work fine on my 10.6.4 Mac Pro without running the iSight Firmware 1.0.3 Updater.
If the updater helps you, use it, but if you are still having trouble, test your external iSight with more than one app in more than one user account.
If your problem occurs ONLY with Skype in EVERY user account you test, your problem is "Skype-specific."
If you do not get the Skype answers you need here, Skype's comprehensive support pages should be your best source of help for Skype-specific issues.
For your specific problem, start with "Skype ... Audio Set-Up ... Mac OS X ...":
http://www.skype.com/intl/en-us/support/user-guides/sound-setup-macosx/
If you are still having problems with Skype, you may get faster answers by searching or posting in the appropriate Skype for Mac OS X forum:
http://forum.skype.com/
EZ Jim
Mac Pro Quad Core (Early 2009) 2.93Ghz w/Mac OS X (10.6.4) MacBook Pro (13 inch, Mid 2009) 2.26GHz (10.6.4)
LED Cinema Display G4 PowerBook 1.67GHz (10.4.11) iBookSE 366MHz (10.3.9) External iSight

Audio with clicks and clucks

Similar Messages

Maybe you are looking for