Audio won't play after replacing the video clip with after effects composition?

I am using CS5. Still new to this stuff so let me know if you need extra info. None of the faq guides have been helpful.

The audio is still in the project, but won't play in the canvas... this was solved by Richardttt... see this thread: http://discussions.apple.com/thread.jspa?threadID=1491870&tstart=0
I tried this and it works but still don't know why it happened: Under Object Menu, select Unsolo>Video Only.

Similar Messages

Audio won't play on top of video

I have shot a simple interview style video and edited it in FCP. I created a simple acoustic guitar loop to play in the background using Garage Band and made it into an .aif format.
I've dropped the file into FCP, but for some reason the audio won't come out for the loop. I still have audio from the video, but the loop doesn't come through. When I watch the audio meter as the video is playing, I can see it responding during silence as if the loop actually is actually playing, but it's not coming out. (I've even listened with headphones to ensure this.) I have turned off the audio from the movie, played the video, and I still SEE the audio for the loop playing, but it isn't coming out of the speakers. I've tried renduring, and still the loop doesn't come through. I have ensured that my Audio rate from my file matches the audio rate from my sequence presets. I've tried changing my audio outputs from all stereo to all mono, to 2 stereo and 2 mono, and I still can't get the audio to for my loop.
Could someone help me out with this?

I know, it's shocking that no one has responded to this.
Anyway, No, I haven't created a new project, but it wouldn't matter because it would have the same settings as my original project. It's interesting to note that only the top two audio tracks will come through, and it's like anything below that will just simply not come out, even though the audio meter still registers the sound from the loop. (I've muted the sound from my video to ensure that it wasn't just background or room noise I was picking up.)
The track I created doesn't show a need to render, but you are correct in that I already checked this. I did, however, take another look at all of my audio clips and the sound of my video is apparently in a mono format as well as my sound loop. (Not sure HOW those became mono, but nothing a simple remixing won't fix.) Anyway, seeing that all of my sound files were mono, I went into my settings and changed all of my audio outputs to mono. So I even have 8 -That's right, count 'em... 8 - mono channels for sound and the loop STILL wouldn't come through.
I swear, sometimes this program makes me want to cus.

Audio won't play on a single video

I bought a video from the itunes store and the video will not play the audio. It is silent on my ipod and macbook pro. Other videos work fine, just this one.

I know, it's shocking that no one has responded to this.
Anyway, No, I haven't created a new project, but it wouldn't matter because it would have the same settings as my original project. It's interesting to note that only the top two audio tracks will come through, and it's like anything below that will just simply not come out, even though the audio meter still registers the sound from the loop. (I've muted the sound from my video to ensure that it wasn't just background or room noise I was picking up.)
The track I created doesn't show a need to render, but you are correct in that I already checked this. I did, however, take another look at all of my audio clips and the sound of my video is apparently in a mono format as well as my sound loop. (Not sure HOW those became mono, but nothing a simple remixing won't fix.) Anyway, seeing that all of my sound files were mono, I went into my settings and changed all of my audio outputs to mono. So I even have 8 -That's right, count 'em... 8 - mono channels for sound and the loop STILL wouldn't come through.
I swear, sometimes this program makes me want to cus.

Audio Won't Play Except From the Beginning

Hi, I'm currently trying to learn how to animate using Flash CC 2014.
So I understand that in order to import audio into Flash, you need to create a layer for it, which I have done successfully.
But my issue is that I've seen that in the past (in flash animation tutorials), if you scroll through the animation's timeline, you can hear the audio play from where you left off, and if you scroll, you can even hear the audio scroll backwards and forwards with your mouse. But when I do so, I can't hear anything.
I can only hear the audio if I play the animation from the beginning, but if I am going to be animating and lip syncing, it's going to grow incredibly tedious for me to have to play through the entire animation to hear what I need to animate next.
Is there a fix for this or is there a setting I have to apply so that audio I've imported plays wherever I continue from the playhead?
I'm using Flash on a Mac if it's any help as well.
Thanks in advance for any help or advice.

Oh my god I feel like an idiot.
Yeah, I had Canvas open because it was the first thing on the list and I assumed it was synonymous to a blank document.
I opened it in ActionScript and changed the properties and it worked perfectly, thank you and @kglad so much, I can finally get some work done!
Thanks again for your help!

Is it possible to create a SD project and then replace the video later with HD?

There are a few reason why I want to do this. One is to speed up editing in CS3 and the other is to produce both DVD and BVD discs as the final product.
My idea was to create a SD project, complete the edit and export the SD master for the DVD. Next I wanted to off-line all the files and then batch capture the video again as HD. In an experiment I found that I needed an HD project so I copied the SD project into an HD project. However, I was not very successful -the captured HD had to be rendered and was not seen as the right format.
Can you tell me if the idea is daft or if there is a correct way of doing this in CS3?
Thanks, Tim

I tried my HD project in CS4 recently. The HD was fine, as expected. I then exported to MPEG-DVD in the media encoder to make the SD version. When I tried this last year in CS3 the SD verion was not very good (understatement). However, the SD version I made from CS4 was very good quailty. Either CS4 has improved greatly or I am now using it properly. So no more HD/SD projects for me. I will edit in HD and export to SD when I have finished.
Tim

IMac's optical drive fan is loud after replacing the optical drive with an SSD?

Today I removed the optical drive from my late 2009 iMac and installed an SSD in its place. Everything works perfectly, except for one thing...my optical drive fan goes crazy when I turn the iMac on. It goes to full blast and it sounds like my computer will blast off into space at any time. I'm aware that this is a common issue when replacing/upgrading hard drives, and so I did some research and found an app called SSD Fan Control that fixed the problem for the most part.
In a nutshell, the fan runs at normal speed and is quiet when I'm logged in and actually using the computer, thanks to SSD Fan Control. However, when I turn the iMac on and it's at the white boot-up screen with the Apple logo, the fan goes up to full blast. Once the computer logs in, the fan quiets down because SSD Fan Control is set to launch at login.
I was wondering if there's a way to make it so that the fan is quiet at the boot screen too...it's quite annoying turning my iMac on and hearing that obnoxiously loud whirring sound as it's booting up. Is it possible, or can it just be controlled while I'm actually logged in?

An iPad is a great device, but it's no computer replacement. It lacks the file sharing/structure that comptuers have and the ability to easily get files onto/off it without the internet.
That said, if you still have your desktop and use it for most of the computing work and basically just want a photo viewer, check your e-mail device, then it may work for you.
The networked harddrive will be the hard part. Since the iPad lacks a file manager anything you use on it must have an app so that you can access it. And that app also must be allowed to 'send' your files to another app. So that may be what you really need to research. The ability and ease of using a network drive to do the file sharing you want.

How do I import video clips from iPhoto if it doesn't recognize the video clips in iMoive

I'm trying to make a movie using iMovie and I recorded some clips using a Sony Digital Camera and iMovie won't let me upload the video clips from iPhoto. I try to import them but when i try to click on the file, it won't let me. Like its not bold like other files (It will let me upload video that were taken with my iPhone) I have iMovie 09.
What do I need to do?
Thanks!
Ayca

Do you plan to put each video clip in iDVD to be playes separately? If so then here's how:
1 - open iDVD and select your theme.
2 - click on the Media button at the bottom right and then on the Photo button at the top.
3 - in the search window type in ".mov" (or the extension of the video clips you plan to use).
4 - all of the video clips with the extension you entered will be displayed and you can drag them into the menu area at the left.
Another way would be to put all of the video clips in an Album and click on that album to view and drag the clips:
Remember, the order that they are added to the menu will be the order that the buttons will highlight when you scroll thru the buttons with a DVD player remote.
This will give you a menu with a separate button for each video clip (up to 12 in a menu with some themes).
If you want to play all of the clips one after another you could create a slideshow in iDVD with the "+" button at the bottom and drag the video clips into the slideshow as you would still photos. Set the slide duration to anything but manual and don't apply any transition.
That will let you play all of the clips sequentially.
OT

Audio won't play on slides containing Flash video

I've wasted pretty much a whole day on this issue, and it's
driving me crazy. I have a presentation that includes 2 flash
videos (screen demos). When I publish the presentation to our
company's web server, the audio for those 2 slides won't play, the
rest of the presentation works fine. If I publish to my hard drive,
the audio plays fine.

The audio for the FLV and the slide should be playing at the
same time (unless you put a delay on the video). To verify, in
Presenter, go to the slide that you are having issues with, select
Edit Video. At the bottom you should see the effects options. Tell
the video to start after the audio. Republish and see if your auido
is there, but was some how drowned out by the FLV. If that was the
case you may just need to boost the volume of your audio to be
louder than the video, but that may cause it to sound like noise.
As a final option, try putting the FLV on a slide following
the problem slide. This will disassociate any relationship between
the audio on your slide and the FLV,
Jorma@RealEyes

Aperture - when you have saved a multi-media slideshow and you export it how do you make sure the audio track retains the volume drops that you programme in? I have video clips with audio, which when they play in the slideshow, I fade the audio (music)?

Aperture - Sorry I'm new to this so this might be a bit long! I put together an aperture slideshow with a backing music track and some video interspersed with photos. When I exported it to put on you tube the audio backing track had not saved the fades that I had programmed when the video clips played. The video clips had audio on them that I set at one volume whilst fading the backing track. these fades didn't save on the exported version. Any suggestions please? Regards, Maxjackpete

Creative Cloud chat support (all Creative Cloud customer service issues)
http://helpx.adobe.com/x-productkb/global/service-ccm.html ( http://adobe.ly/19llvMN )

Good morning , I bought my mac pro 13 ' in 2011 (OX 10.10) , in March 2014 I had to replace the video card , fortunately under warranty. Today, after only eight months starting with the same problems ! I read online that some mac products in 2011 wer

Good morning , I bought my mac pro 13 ' in 2011 (OX 10.10) , in March 2014 I had to replace the video card , fortunately under warranty.
Today, after only eight months starting with the same problems !
I read online that some mac products in 2011 were put on the market defective , you can get a warranty extension or even a replacement mac?

dubem747 wrote:
It looks like your phone has a some virus, use your computer to scan and remove it.
not possible for it to have a virus and a PC would not know how to scan the OS as its protected
Click here to Backup the data on your BlackBerry Device! It's important, and FREE!
Click "Accept as Solution" if your problem is solved. To give thanks, click thumbs up
Click to search the Knowledge Base at BTSC and click to Read The Fabulous Manuals
BESAdmin's, please make a signature with your BES environment info.
SIM Free BlackBerry Unlocking FAQ
Follow me on Twitter @knottyrope
Want to thank me? Buy my KnottyRope App here
BES 12 and BES 5.0.4 with Exchange 2010 and SQL 2012 Hyper V

When I import my files only the audio plays back not the video. If I export the sequence its there?

When I import my files only the audio plays back not the video. If I export the sequence its there?
I am new to Premiere having just downloaded the 30 day trial yesterday, I jumped straight in and imported all of my files from my video camera however in Premiere only the audio plays back with the displays just showing a black space.
Out of curiosity I dragged three or four shots into the sequence editor and then exported them and played this through VLC and the video was there?
As I said I am completely new to Premiere having only spent around 3 or 4 hours with it in the past, I read a few forum threads around similar issues but couldn't find any solutions and as I am trying to edit together a short film for a college project due in soon I need to try and find a way to fix this A.S.A.P
Any help would be appreciated and if theres any more info I can provide please let me know.
Thanks
Drew

Being new, I'm sure you don't know about the NEW ITEM process, so click/read about that at this link
CS5-thru-CC PPro/Encore tutorial list http://forums.adobe.com/thread/1448923
Also, More information needed for someone to help... please click below and provide the requested information
-PPro Information FAQ http://forums.adobe.com/message/4200840
What is your exact brand/model graphics adapter (ATI or nVidia or ???)
What is your exact graphics adapter driver version?
Have you gone to the vendor web site to check for a newer driver?
For Windows, do NOT rely on Windows Update to have current driver information
-you need to go direct to the vendor web site and check updates for yourself
ATI Driver Autodetect http://support.amd.com/en-us/download/auto-detect-tool
nVidia Driver Downloads http://www.nvidia.com/Download/index.aspx?lang=en-us
Exactly what are you editing?
Codec & Format information, with 2 links inside for you to read http://forums.adobe.com/thread/1270588
Report back with the codec details of your file, use the programs below... A screen shot works well to SHOW people what you are doing
http://forums.adobe.com/thread/592070?tstart=30 for screen shot instructions
Free programs to get file information for PC/Mac http://mediaarea.net/en/MediaInfo/Download

TS1718 My videos in itunes play for about ten seconds before they quit. After I play them again, the video restarts. Any ideas?

My videos in itunes play for about ten seconds before they quit. After I play them again, the video restarts. Any ideas?

Welcome to the Apple Community.
Intermittent problems are often a result of interference. Interference can be caused by other networks in the neighbourhood or from household electrical items.
You can download and install iStumbler (NetStumbler for windows users) to help you see which channels are used by neighbouring networks so that you can avoid them, but iStumbler will not see household items.
Refer to your router manual for instructions on changing your wifi channel.

Help!! AVI audio won't play - Premiere Pro v.7

Hi!
I captured footage from my DV camera into Windows Movie Maker in the form of a DV-avi. (I use WMM because Premiere crashes when I try to capture DV video). And when I import the AVI into Premiere Pro v.7 the audio won't play in the project window. However, when I scrub the slider back and forth the audio does play (kind of).
I have never had this problem before. I've captured video many times and this never happened.
I tried re-capturing it 6 times, but still the audio doesn't play (except when I scrub).
Is there an option I clicked accidentally?
Any help would be really great.
Thanks a lot!
-R

John T Smith wrote:
I think WMM creates type 1 files and Premiere needs type 2
You might Google for a converter
You might also use the free http://www.headbands.com/gspot to find out the file details, and report back so someone may be able to help
I installed that program. Very helpful and interesting. Thanks for the link.
I assumed, like you, that I had simply captured the AVI files as Type 1. But I guess they are Type 2, after all.
I don't know if this helps, but the AVIs play just fine in Quicktime, Windows Media Player, WMM and Winamp.
Thanks again for your help.
Here is the information gspot provided:
FILE_NAME                      tape6_raw0001.avi
FILE_NAME_WITH_PATH            O:\EDITING\In the Woods\Tape 6\clips\tape6_raw0001.avi
FILE_SIZE                      90,872,392
CONT_AUDIO_STREAM_COUNT        1
CONT_BASETYPE                  AVI(.AVI)
CONT_BYTES_MISSING             0
CONT_INTERLEAVE_ALIGN
CONT_INTERLEAVE_PRELOAD
CONT_INTERLEAVE_TIME
CONT_SUBTYPE                   OpenDML (AVI v2.0),
CONT_TOTAL_BITRATE             0
VIDEO_ASPECT_CONVERT_AVI1      Resize to 656 x 480 (Use +/- for other target sizes)
VIDEO_ASPECT_CONVERT_AVI2      Crop off any non-picture areas, if req'd
VIDEO_ASPECT_CONVERT_CVD1      Resize to 360 x 480 ( w:[1/2] h:[1/1] )
VIDEO_ASPECT_CONVERT_CVD2      Trim 4 from each side for 352 x 480
VIDEO_ASPECT_CONVERT_DVD1      No resize req'd
VIDEO_ASPECT_CONVERT_DVD2      No cropping req'd
VIDEO_ASPECT_CONVERT_SVCD1     Resize to 480 x 480 ( w:[2/3] h:[1/1] )
VIDEO_ASPECT_CONVERT_SVCD2     No cropping req'd
VIDEO_ASPECT_CONVERT_VCD1      Resize to 360 x 240 ( w:[1/2] h:[1/2] )
VIDEO_ASPECT_CONVERT_VCD2      Trim 4 from each side for 352 x 240
VIDEO_ASPECT_SOURCE_MATCH      DVD
VIDEO_ASPECT_TYPE_NTSC         NTSC
VIDEO_ASPECT_TYPE_PAL
VIDEO_BITRATE                  28771
VIDEO_CODEC_NAME               DVC/DV Video
VIDEO_CODEC_STATUS             Codec(s) are Installed
VIDEO_CODEC_TYPE               dvsd
VIDEO_DAR                      1.333
VIDEO_DURATION                 0:24.291
VIDEO_FIELDS_PER_SEC           59.940
VIDEO_FRAME_COUNT              728
VIDEO_FRAMES_PER_SEC           29.970
VIDEO_H264
VIDEO_MPEG2
VIDEO_MPEG2_3X2
VIDEO_MPEG2_BFF
VIDEO_MPEG2_I_L
VIDEO_MPEG2_PPF
VIDEO_MPEG2_PROG
VIDEO_MPEG2_TFF
VIDEO_MPEG4
VIDEO_MPEG4_BVOP
VIDEO_MPEG4_GMC
VIDEO_MPEG4_NVOP
VIDEO_MPEG4_QPEL
VIDEO_PAR                      0.889
VIDEO_PICS_PER_SEC             29.970
VIDEO_QF                       2.778
VIDEO_SAR                      1.500
VIDEO_SIZE_X                   720
VIDEO_SIZE_Y                   480
AUDIO_BITRATE                  1024
AUDIO_BITRATE_TYPE
AUDIO_CHANNEL_COUNT            2
AUDIO_CODEC                    PCM Audio
AUDIO_CODEC_STATUS             No Codec Required
AUDIO_MPEG_STREAM_ID
AUDIO_MPEG_SUBSTREAM_ID
AUDIO_SAMPLE_RATE              32000

Premiere Elements 4 audio won't play on mp4 files, codecs missing/unavailable on .mov files

I dowlnloaded Premiere Elements 4, and when I import mp4 files, the video plays but the audio will not. I've also tried to import .mov files, and an error message pops up that says "Codec missing or unavailable." I downloaded the latest version of Quicktime, but that didn't change anything. The files will play back on the video camera, but I"m having trouble with them on my computer. The audio on the mp4 files plays in Quicktime, but not the video, and vice versa when I import them into Elements. Any suggestions?

Does Quicktime Pro also edit .mov files on a PC?
Date: Wed, 27 Nov 2013 07:53:14 -0800
From: [email protected]
To: [email protected]
Subject: Premiere Elements 4 audio won't play on mp4 files, codecs missing/unavailable on .mov files
    Re: Premiere Elements 4 audio won't play on mp4 files, codecs missing/unavailable on .mov files
    created by Steve Grisetti in Premiere Elements - View the full discussion
Premiere Elements 4 pretty much works with tape-based digital video. That would be video from a miniDV or HDV tape-based camcorder. It doesn't handle other formats very well.
If you plan to edit MP4s, you definitely want to upgrade to a more current version of the program. If you can't install a current version of the program, you may need to address issues on your computer (such as an outdated operating system or underpowered hardware configuration).
Short of that, you could buy Quicktime Pro from Apple for $29. It will edit MP4s, even on a PC platform.
     Please note that the Adobe Forums do not accept email attachments. If you want to embed a screen image in your message please visit the thread in the forum to embed the image at http://forums.adobe.com/message/5879880#5879880
     Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: http://forums.adobe.com/message/5879880#5879880
     To unsubscribe from this thread, please visit the message page at http://forums.adobe.com/message/5879880#5879880. In the Actions box on the right, click the Stop Email Notifications link.
           Start a new discussion in Premiere Elements at Adobe Community
For more information about maintaining your forum email notifications please go to http://forums.adobe.com/thread/416458?tstart=0.

Audio won't play on MPEG files from camera?

I'm having issues with my new video camera. I want to use my final cut express to edit the videos, but the audio on the video files won't play. The videos play just fine, just no sound. I've turned the volume all the way up on my mac, but still nothing.
Any suggestions to make the audio work?
(I'm not the most familiar with computers, so simple/specific instructions would be best)

You have to separate out the audio and video tracks (referred to as "demuxing") of an MPEG-1 or MPEG-2 file before you import it into FCE. Try MPEG StreamClip to convert the MPEG files into an editing format (DV Stream, for instance). If your camera outputs MPEG-2, you'll also need the MPEG-2 Playback Component.
Hope this helps.

Audio won't play after replacing the video clip with after effects composition?

Similar Messages

Maybe you are looking for