Audio won't play from the start of the slide
Good afternoon all,
I'm new at this and recently created my first instructive
demo. I recorded and have everything synching up fine but the audio
in two of the slides WON'T start the audio from the first words
recorded. The audio begins in the middle of the second or third
word spoken.
This only happens when I play the entire demo or from a
certain point in the demo to the end. If I play the two slide with
the audios indiviually you can hear my every word from start to
finish and if I play the audio ONLY I hear it fine also.
I have tried starting the audio a few seconds after the
screen being demonstrated starts, re-recording the audio, adding
silence in the beginning.........................anyone have any
suggections. I've done everything I know to do but start over from
scratch.........I didn't say that...........LOL!
My suggestion was going to be ensure the audio file starts a
second or
two after the slide starts, but seems you're already doing
that.
So if you've tried all those things and no luck, then I'd
recreate the
slide entirely.
Insert a blank slide, copy the background from the problem
slide to the
blank slide ('paste as background'), then insert the audio
and test it.
If it works as expected, then copy/paste any other screen
elements from
the problem slide, then delete that problem slide.
Helps?
Erik
Neckbone2007 wrote:
> I recorded
> and have everything synching up fine but the audio in
two of the slides WON'T
> start the audio from the first words recorded.
Erik Lord
http://www.capemedia.net
Adobe Community Expert - Authorware
http://www.adobe.com/communities/experts/
http://www.awaretips.net -
samples, tips, products, faqs, and links!
*Search the A'ware newsgroup archives*
http://groups.google.com/group/macromedia.authorware
Similar Messages
-
Audio won't play off the timeline
I have been working with a 17min. project shot in HDV and edited w FCP 6. I have tried a few different ways to get it out to DVD Pro through Compressor. I also tried to convert it from HDV to DV so I could take it back out to tape as a DV project. I went back to the project and tried to do another compressed version for DVD after being unsuccesful converting it to DV. So when I went to Compress it to a DVD there was no audio on the DVD. I went back into the FCP project and found that the audio does not play off the timeline anymore. The audio waves are still on the timeline and when I double click on the timeline it plays in my viewer. i checked the audio outputs but the audio is not showing on the LEDs in the audio mixer. Did something get changed because of my trying to export it?
If none of the above suggestions work toggle on the Audio Controls speaker icon (see image below) and if the speakers icon appear yellow single click them (same action can be performed in the audio mixer.
!http://i533.photobucket.com/albums/ee340/gogiangigo/AudioControls.jpg!
Luca -
Audio won't play in the Viewer but will in the Canvas from the timeline.
If I select a clip from the timeline to open in the viewer, I cannot hear the audio even though both video and audio are selected. This only happens in certain projects. Anyone know why?
In the View menu, make sure the Audio Playback is set correctly.
-
Full screen playback won't play from the playhead
Hi all,
I'm using I-Movie 11. When I try to play in full screen (either by using cmd+G or going through the 'view' menu) it will not play from where the playhead is. Instead it seems to start from random clips in my event. If I am already watching part of an event and then try to move to watching in full screen, this also happens and the playback jumps back to a random point.
It used to work fine and I don't have this problem if trying to view a project. Does anyone have any clues about why this might have happened or how I might fix it?
Thanks,
JenThe problem was resolved just by restarting the computer. My son read elsewhere that the video player may have been trying to run in 64 bit mode while his older OS X is in 32 bit mode. Restarting seemed to reset it.
-
Help!! AVI audio won't play - Premiere Pro v.7
Hi!
I captured footage from my DV camera into Windows Movie Maker in the form of a DV-avi. (I use WMM because Premiere crashes when I try to capture DV video). And when I import the AVI into Premiere Pro v.7 the audio won't play in the project window. However, when I scrub the slider back and forth the audio does play (kind of).
I have never had this problem before. I've captured video many times and this never happened.
I tried re-capturing it 6 times, but still the audio doesn't play (except when I scrub).
Is there an option I clicked accidentally?
Any help would be really great.
Thanks a lot!
-RJohn T Smith wrote:
I think WMM creates type 1 files and Premiere needs type 2
You might Google for a converter
You might also use the free http://www.headbands.com/gspot to find out the file details, and report back so someone may be able to help
I installed that program. Very helpful and interesting. Thanks for the link.
I assumed, like you, that I had simply captured the AVI files as Type 1. But I guess they are Type 2, after all.
I don't know if this helps, but the AVIs play just fine in Quicktime, Windows Media Player, WMM and Winamp.
Thanks again for your help.
Here is the information gspot provided:
FILE_NAME tape6_raw0001.avi
FILE_NAME_WITH_PATH O:\EDITING\In the Woods\Tape 6\clips\tape6_raw0001.avi
FILE_SIZE 90,872,392
CONT_AUDIO_STREAM_COUNT 1
CONT_BASETYPE AVI(.AVI)
CONT_BYTES_MISSING 0
CONT_INTERLEAVE_ALIGN
CONT_INTERLEAVE_PRELOAD
CONT_INTERLEAVE_TIME
CONT_SUBTYPE OpenDML (AVI v2.0),
CONT_TOTAL_BITRATE 0
VIDEO_ASPECT_CONVERT_AVI1 Resize to 656 x 480 (Use +/- for other target sizes)
VIDEO_ASPECT_CONVERT_AVI2 Crop off any non-picture areas, if req'd
VIDEO_ASPECT_CONVERT_CVD1 Resize to 360 x 480 ( w:[1/2] h:[1/1] )
VIDEO_ASPECT_CONVERT_CVD2 Trim 4 from each side for 352 x 480
VIDEO_ASPECT_CONVERT_DVD1 No resize req'd
VIDEO_ASPECT_CONVERT_DVD2 No cropping req'd
VIDEO_ASPECT_CONVERT_SVCD1 Resize to 480 x 480 ( w:[2/3] h:[1/1] )
VIDEO_ASPECT_CONVERT_SVCD2 No cropping req'd
VIDEO_ASPECT_CONVERT_VCD1 Resize to 360 x 240 ( w:[1/2] h:[1/2] )
VIDEO_ASPECT_CONVERT_VCD2 Trim 4 from each side for 352 x 240
VIDEO_ASPECT_SOURCE_MATCH DVD
VIDEO_ASPECT_TYPE_NTSC NTSC
VIDEO_ASPECT_TYPE_PAL
VIDEO_BITRATE 28771
VIDEO_CODEC_NAME DVC/DV Video
VIDEO_CODEC_STATUS Codec(s) are Installed
VIDEO_CODEC_TYPE dvsd
VIDEO_DAR 1.333
VIDEO_DURATION 0:24.291
VIDEO_FIELDS_PER_SEC 59.940
VIDEO_FRAME_COUNT 728
VIDEO_FRAMES_PER_SEC 29.970
VIDEO_H264
VIDEO_MPEG2
VIDEO_MPEG2_3X2
VIDEO_MPEG2_BFF
VIDEO_MPEG2_I_L
VIDEO_MPEG2_PPF
VIDEO_MPEG2_PROG
VIDEO_MPEG2_TFF
VIDEO_MPEG4
VIDEO_MPEG4_BVOP
VIDEO_MPEG4_GMC
VIDEO_MPEG4_NVOP
VIDEO_MPEG4_QPEL
VIDEO_PAR 0.889
VIDEO_PICS_PER_SEC 29.970
VIDEO_QF 2.778
VIDEO_SAR 1.500
VIDEO_SIZE_X 720
VIDEO_SIZE_Y 480
AUDIO_BITRATE 1024
AUDIO_BITRATE_TYPE
AUDIO_CHANNEL_COUNT 2
AUDIO_CODEC PCM Audio
AUDIO_CODEC_STATUS No Codec Required
AUDIO_MPEG_STREAM_ID
AUDIO_MPEG_SUBSTREAM_ID
AUDIO_SAMPLE_RATE 32000 -
Hi there
I have an adobe DPS document with several pages, and edge animations on each page. I want each animation to play from the start when each page is opened, however, the playback seems to be very inconsistent. Some animations play from the start, others half way through, and some playback incorrectly. I want to also be able to return to each page and have the animations reload, instead of just displaying the final frame of the animation.
I have played around with the delay time which doesnt seem to fix it.
Any advice would be greatly appreciated.
DanHi, Im DPS projects medias like video, audio, animation html5 dosen´t reload inside the same article, just between the articles. Better produce articles just one page and change pages with horizontal swipe Regards
-
i've tried this repeatedly for the past 6 hours. Rebooted, etc. I can stream movies from netflix and hulu but the movie i rented won't play. The timer is ticking becuase it started then froze but now it won't load.
force quit app. double click home button and slide app up and off page
Peace, Clyde -
How to start midi event playing from the middle of event?
I'm not sure if my post title is correct but...
I have a two minute piece of music with various instruments playing. There are some strings that play the same couple of notes throughout.
At the moment I am working on a middle section but as I loop, the srings aren't triggered - I have to play from the start (before the event starts). I did not have a problem with Cubase but I can't find a way to do this in Logic.
It's probaly quit simple though?This typically means the midi notes themselves start before the beginning of the loop point you have choosen
You can quantize or manually move the first notes so that they start at the beginning of the loop and not just before... to resolve this..
Select the regions and then check the event list for the region to confirm this is what is going on... -
when i play back an mp3 dj mix i,ve burn,t to cd in my car when i turn the engine of and then restart the car the cd starts back from the beginning how do i solve this problem so that when i turn the engine on end off the cd plays from the same place it did before i turned the engine off
It could be that the CD player will only playback "Redbook" CD's from the previous position.
And starts mp3 type CD's from the beginnig.
However.. it's not Logic related.
pancenter- -
I recorded audio with Quicktime player and the sound files won't disappear from the desktop no matter how I try to put them in the trash...tried xing out the red x, putting them in the trash...right clicking to make them disappear...nothing works...
Just got rid of them... I closed Quicktime and was asked to delete. So I deleted them. Problem solved.
-
How do I un-embed a youtube video? I deleted the youtube video from ibooks author on my iMac, but it won't delete from the ipad ibook view. It shows up in my book as a blank bar until I tap it, then it plays the video. I made a new page after deleting the original page in which I inserted the video; it still shows up. Only the advertisement from the video plays.
delete the media widget in Author
re-preview to your iPad
hope this helps... -
Audio won't play after replacing the video clip with after effects composition?
I am using CS5. Still new to this stuff so let me know if you need extra info. None of the faq guides have been helpful.
The audio is still in the project, but won't play in the canvas... this was solved by Richardttt... see this thread: http://discussions.apple.com/thread.jspa?threadID=1491870&tstart=0
I tried this and it works but still don't know why it happened: Under Object Menu, select Unsolo>Video Only. -
Does the EQ setting affect only audio played from the Music app?
Does the EQ setting in Settings -> Music affect only audio played from the Music app or does it also affect any other audio? Specifically, I'd like to know if the setting is applied to audio podcasts that are played from Downcast. Thanks!
--VVThey will only affect the Music app.
-
My Ipod shuffle 3rd gen starts playing songs with some kind of interference until it stops playing, when I turn it off and on again it starts playing from the first song all over again, and once it sounded like the music was slowing down. First I thought it was the earphones, but I exchanged them for newer ones and so far its the same
You may want to do a Restore on the shuffle in iTunes. The Restore button is on the shuffle's Summary screen in iTunes. This will erase the shuffle, re-install its software, and set it to default settings. If it's a software or data corruption glitch, the Restore should fix it. After the Restore, reload or resync your songs, and try it again. As a test, you may want to initially select a small number of songs to put back on the shuffle.
-
Audio won't play on MPEG files from camera?
I'm having issues with my new video camera. I want to use my final cut express to edit the videos, but the audio on the video files won't play. The videos play just fine, just no sound. I've turned the volume all the way up on my mac, but still nothing.
Any suggestions to make the audio work?
(I'm not the most familiar with computers, so simple/specific instructions would be best)You have to separate out the audio and video tracks (referred to as "demuxing") of an MPEG-1 or MPEG-2 file before you import it into FCE. Try MPEG StreamClip to convert the MPEG files into an editing format (DV Stream, for instance). If your camera outputs MPEG-2, you'll also need the MPEG-2 Playback Component.
Hope this helps.
Maybe you are looking for
-
Some notifications don't appear in Notification Center
I've been wondering about this for some time. I pressed the home button on my iPhone to wake it up and saw a quick glimpse of a number of notifications, including some from Twitter, Facebook, etc. This got my curiosity up. However, Touch ID kicked in
-
I am having a problem with Bootcamp on my Macbook Pro (early 2011).
I know how to install windows using bootcamp etc. etc. The problem is that I have successfully installed and have been using windows on my mac...until today I tried starting up in windows as usual and all of a sudden, it loaded up much slower than us
-
I have the most recently version for ipad and i don't haven't app for record my VoiceOver, like memo vocali
-
I cant sync my new ipod?
ok will i had any old ipod4 and somrthing happened to eat so a few months past by and i buy a new one on ebay which was yesterday i got it,,today i wanted to put music on it but i dont know whant to do because everytime i conect it to my computer on
-
Reporting Subscriptions Failing - "Failure Sending Mail". Must be something obvious!
I've spent the last few hours on this and cannot for the life of me figure what it is that I have overlooked. I have created a report email subscription, nothing particularly fancy. It is always failing on: Failure sending mail: The SMTP server requi