Audio won't play in the Viewer but will in the Canvas from the timeline.

If I select a clip from the timeline to open in the viewer, I cannot hear the audio even though both video and audio are selected. This only happens in certain projects. Anyone know why?

In the View menu, make sure the Audio Playback is set correctly.

Similar Messages

  • Audio won't play off the timeline

    I have been working with a 17min. project shot in HDV and edited w FCP 6. I have tried a few different ways to get it out to DVD Pro through Compressor. I also tried to convert it from HDV to DV so I could take it back out to tape as a DV project. I went back to the project and tried to do another compressed version for DVD after being unsuccesful converting it to DV. So when I went to Compress it to a DVD there was no audio on the DVD. I went back into the FCP project and found that the audio does not play off the timeline anymore. The audio waves are still on the timeline and when I double click on the timeline it plays in my viewer. i checked the audio outputs but the audio is not showing on the LEDs in the audio mixer. Did something get changed because of my trying to export it?

    If none of the above suggestions work toggle on the Audio Controls speaker icon (see image below) and if the speakers icon appear yellow single click them (same action can be performed in the audio mixer.
    !http://i533.photobucket.com/albums/ee340/gogiangigo/AudioControls.jpg!
    Luca

  • How do I fix it when an album won't play on my ipod but will in itunes?

    How do I fix it when an album won't play on my ipod but eill in itunes?

    Try:
    - Reset the iOS device. Nothing will be lost
    Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Unsync all music and resync
    - Reset all settings      
    Go to Settings > General > Reset and tap Reset All Settings.
    All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
    - Restore from backup. See:                                 
    iOS: How to back up           
    - Restore to factory settings/new iOS device.
    If still problem, make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
    Apple Retail Store - Genius Bar          

  • Audio "sub-clips" won't play in source monitor, but will play when cut into a sequence.

    I'm cutting an "audio only" project in Premiere and I came across a strange problem while making sub-clips. The first 6 sub clips made from the same master audio clip were normal, but then something changed, and the rest of them won't play any sound while in the "Source" window, even though while in the window the sub-clip displays a waveform.
    Once edited into a sequence they play normally, but not being able to listen to the sub clips in the source monitor is annoying, and louses up my whole editing routine for this kind of project.
    Any ideas as to why this is happening, or what I might do to fix it?

    Number of issues here:
    1. Your system does not meet minimum requirements.
    2. Your CPU, disks, memory are not enough for anything other than DV.
    3. What video camera was used with what codec on what OS with which version of PR. etc.
    Some suggestions... and answer at least the 16 questions at the end of the Wiki article.

  • All of a sudden my burnt cds from my macbook pro won't play in my Mac but will play in a PC or a DVD player! Itunes

    all of a sudden when I burn cds on my Mac they won't play & tost titanium & Itunes reading them as blanks, but the cds will play in a PC or a DVD player. For some reason Mac not reading the discs. Even hooked up an external burner & cleaned the drive to no avail, weird, was wondering if anyone had a solution to my problem?

    Noodledood2 wrote:
    i also am curious how i can create a bootable drive from windows that i can boot mac os mountain lion from. How do i go about downloading Mountain lion onto my windows partition so i can create a bootable drive?...
    You can't boot OS X with a Windows boot device.
    Internet Recovery is the next step. Follow ssls6's advice.

  • Burned disc won't play on CD players but will play on PC

    iTunes informs me it has burned my playlist successfully to a CD-RW, but when put in a CD-player, 'disc' comes up. When I put the CD-RW into the PC again, iTunes tries to import the songs like its a normal audio CD. The settings in iTunes are set correctly to burn on the disc format 'Audio CD', and the burner itself, when I've 'Checked for updates', is apparently up to date. What can I do? Should I use a CD-R intead of CD-RW?
    Any help would be appreciated!!

    +"Should I use a CD-R intead of CD-RW?"+
    Yes. Many "normal" (i.e. non-computer) CD players cannot handle CD-RWs. When burning an audio CD to play in a regular CD player or car stereo, always use a CD-R.

  • Just Authored DVD won't play in DVD Player, but will in my kid's PS2

    I just made this dvd with Studio Pro 3.0.2, burned it to a DVD-R and DVD Player won't play it and it used to play others I've authored, but now it won't..can't copy it either with Toast..it just opens up the tray again..no error code or anything. Anyone know what's up??
    I think I'm doing everything just as I used to..
    Thanks
    Mark
    Like I said..work's in the PS2....Weird

    When you say DVD Player (standalone) or do you mean Apple DVD Player? Could be many things from a bad burn to the drive you are trying it in is going bad/dirty. When you are copying it with Toast why are you trying to copy it, why not just burn another copy off the build?
    Anymore details on the process, what brand of media, how you burned it could point to where the issue is.

  • MP3 files won't play in iTunes (Vista), but will play in WMP/iTunes (Mac)

    I have a strange problem that's starting to get incredibly frustrating!
    Have a wonderful Mac (powerbook g4 1.5 ghz), got a new PC recently, running Vista and iTunes 7.5.0.20, and transferred my iTunes library over.
    I've found that a significant number of MP3 files (maybe 5% of a library of 5397 songs) refuse to play on iTunes, but play just fine in Windows Media Player or in iTunes on my Mac.
    The problematic files exhibit the following symptoms:
    If I double click one of the files to play it (or hit the play button), nothing happens
    If I set album art to show for the selected song, I get the mesage "Album Artwork Not Modifiable" in the album art box
    If I try to convert one of the files to MP3, I get the error "Error occurred while converting the file "foo". An unknown error occurred (-50)."
    The problematic files have artist/album/title info, but they have nothing listed for "Format" "Channels" "ID3 Tag" or "Encoded With" (the labels don't show at all in the "Summary" section of Get Info
    Any suggestions? Right now, I'm thinking of re-encoding the problem files on my Mac, but that's a pretty kludgy workaround. Ideas would be appreciated!
    Thanks!
    Daniel
    Message was edited by: dccarroll

    I had this same problem and found a solution. I used an external program for ID3 tagging (MediaMonkey) and the tags it wrote for a few files must have been corrupt. As a result iTunes would not play the file. I simply re-tagged the files with MediaMonkey again and the problem went away.

  • MP4 files won't play in PSE 13 but will in PSE 8 on same PC

    I just upgraded to PSE 13 on my Windows 8.1 PC, but none of my MP4 files with MP4V video will play in PSE 13.  I get an error dialog saying that I don't have the "required codec installed".  This is not the case because I still have PSE 8 installed on the same PC and it plays these videos fine. These files also play fine in both 32-bit and 64-bit Windows Media Player so what is wrong with PSE 13?  This seems like a bug in PSE and I don't want to install Quicktime on my PC.

    Are you sure you have Photoshop Elements 8 and not Photoshop Premier elements 8?  I would have thought that MP4 files can be played in Premier elements (PE) rather than Photoshop elements (PSE).  PSE is for photos and PE is for movies and videos.
    Perhaps you could try installing the trial version of PE13 to see if anything changes.  I am not into movies and all that so my answer is just a guess work.

  • On my Mac (vers 10.7.5) I use Disk Utilites to burn a DVD. The DVD won't play on the Mac but will play on my Windows PC and on a DVD player. A DVD created on my PC will play on the Mac. Any ideas why this is happening?

    On my Mac (vers 10.7.5) I use Disk Utilites to burn a DVD. The DVD won't play on my Mac but will play on my Windows PC and on a DVD player. A DVD created on my PC will play on the Mac. Any ideas why this is happening?

    I used iDVD to create an IMG file
    You created the video DVD, the IMG file, with iDVD and just burned it with Disk Utility. As Klaus1 pointed out Disk Utility can't create video DVDs.
    OT

  • Audio won't play after audio render

    I have an MP3 on audio track 1 in Premiere/CS4, placed underneath video clips which I've unlinked from the audio and deleted/cleared those unlinked audio files.  The MP3 file plays fine until I render the timeline and then it stops playing.  If I 'double click' the file (placing it back in the source window) it plays fine there, but won't play in the timeline.  I've included the file properties below.  Does anyone have any idea why this is happening and what I can do to fix the problem?
    Type: MP3 Audio
    File Size: 4.2 MB
    Source Audio Format: 44100 Hz - compressed - Stereo
    Project Audio Format: 44100 Hz - 32 bit floating point - Stereo
    Total Duration: 00:03:03:32868
    Average Data Rate: 23 KB / second

    I could do a MP3 to WAV conversion, but that defeats the
    purpose of storing my (growing) music library in MP3 for space conservation.
    I understand the space problem. Only do this for files that you are using as Assets, Imported into PrPro, if they give you a problem.
    Seems I'm finding I have to do a lot of 'work arounds' with CS4.
    Well, it does seem that you are not alone on this one. However, my problem came with PrPro 2.0. In my case, it only happened once, but did affect about a dozen Audio files in several Sequences. Did not realize the magnitude of my issue, and only observed it after a busy day of trying to Keyframe some Effects and doing multiple Renders to check things out. One moment all Audio in that section was playing well - next moment (after one more Render) dead. Others, who replied to my thread indicated that it had happened to them too, in similar circumstances. Trouble was, none of us could duplicate it and some had this happen on their first Render, while I'd probably done a dozen that morning. Have never had it happen again, and finished that Project with hundreds more Renders, just like I'd done, with not one problem. I certainly can not call it a Bug, as there was no way for anyone to reproduce it. Still, whatever allows it to happen, under the right (or wrong) circumstances seems to be around two generations later. Hey, phases of the Moon?
    Good luck, and let's hope that neither of us sees this behavior again,
    Hunt

  • Help!! AVI audio won't play - Premiere Pro v.7

    Hi!
    I captured footage from my DV camera into Windows Movie Maker in the form of a DV-avi. (I use WMM because Premiere crashes when I try to capture DV video). And when I import the AVI into Premiere Pro v.7 the audio won't play in the project window. However, when I scrub the slider back and forth the audio does play (kind of).
    I have never had this problem before. I've captured video many times and this never happened.
    I tried re-capturing it 6 times, but still the audio doesn't play (except when I scrub).
    Is there an option I clicked accidentally?
    Any help would be really great.
    Thanks a lot!
    -R

    John T Smith wrote:
    I think WMM creates type 1 files and Premiere needs type 2
    You might Google for a converter
    You might also use the free http://www.headbands.com/gspot to find out the file details, and report back so someone may be able to help
    I installed that program. Very helpful and interesting. Thanks for the link.
    I assumed, like you, that I had simply captured the AVI files as Type 1. But I guess they are Type 2, after all.
    I don't know if this helps, but the AVIs play just fine in Quicktime, Windows Media Player, WMM and Winamp.
    Thanks again for your help.
    Here is the information gspot provided:
    FILE_NAME                      tape6_raw0001.avi
    FILE_NAME_WITH_PATH            O:\EDITING\In the Woods\Tape 6\clips\tape6_raw0001.avi
    FILE_SIZE                      90,872,392
    CONT_AUDIO_STREAM_COUNT        1
    CONT_BASETYPE                  AVI(.AVI)
    CONT_BYTES_MISSING             0
    CONT_INTERLEAVE_ALIGN         
    CONT_INTERLEAVE_PRELOAD       
    CONT_INTERLEAVE_TIME          
    CONT_SUBTYPE                   OpenDML (AVI v2.0),
    CONT_TOTAL_BITRATE             0
    VIDEO_ASPECT_CONVERT_AVI1      Resize to 656 x 480 (Use +/- for other target sizes)
    VIDEO_ASPECT_CONVERT_AVI2      Crop off any non-picture areas, if req'd
    VIDEO_ASPECT_CONVERT_CVD1      Resize to 360 x 480  ( w:[1/2]  h:[1/1] )
    VIDEO_ASPECT_CONVERT_CVD2      Trim 4 from each side for 352 x 480
    VIDEO_ASPECT_CONVERT_DVD1      No resize req'd
    VIDEO_ASPECT_CONVERT_DVD2      No cropping req'd
    VIDEO_ASPECT_CONVERT_SVCD1     Resize to 480 x 480  ( w:[2/3]  h:[1/1] )
    VIDEO_ASPECT_CONVERT_SVCD2     No cropping req'd
    VIDEO_ASPECT_CONVERT_VCD1      Resize to 360 x 240  ( w:[1/2]  h:[1/2] )
    VIDEO_ASPECT_CONVERT_VCD2      Trim 4 from each side for 352 x 240
    VIDEO_ASPECT_SOURCE_MATCH      DVD
    VIDEO_ASPECT_TYPE_NTSC         NTSC
    VIDEO_ASPECT_TYPE_PAL         
    VIDEO_BITRATE                  28771
    VIDEO_CODEC_NAME               DVC/DV Video
    VIDEO_CODEC_STATUS             Codec(s) are Installed
    VIDEO_CODEC_TYPE               dvsd
    VIDEO_DAR                      1.333
    VIDEO_DURATION                 0:24.291
    VIDEO_FIELDS_PER_SEC           59.940
    VIDEO_FRAME_COUNT              728
    VIDEO_FRAMES_PER_SEC           29.970
    VIDEO_H264                    
    VIDEO_MPEG2                   
    VIDEO_MPEG2_3X2               
    VIDEO_MPEG2_BFF               
    VIDEO_MPEG2_I_L               
    VIDEO_MPEG2_PPF               
    VIDEO_MPEG2_PROG              
    VIDEO_MPEG2_TFF               
    VIDEO_MPEG4                   
    VIDEO_MPEG4_BVOP              
    VIDEO_MPEG4_GMC               
    VIDEO_MPEG4_NVOP              
    VIDEO_MPEG4_QPEL              
    VIDEO_PAR                      0.889
    VIDEO_PICS_PER_SEC             29.970
    VIDEO_QF                       2.778
    VIDEO_SAR                      1.500
    VIDEO_SIZE_X                   720
    VIDEO_SIZE_Y                   480
    AUDIO_BITRATE                  1024
    AUDIO_BITRATE_TYPE            
    AUDIO_CHANNEL_COUNT            2
    AUDIO_CODEC                    PCM Audio
    AUDIO_CODEC_STATUS             No Codec Required
    AUDIO_MPEG_STREAM_ID          
    AUDIO_MPEG_SUBSTREAM_ID       
    AUDIO_SAMPLE_RATE              32000

  • I'm trying to reverb an audio clip in my timeline and I can't find the effect tab in the browser to drag to my audio clip to reverb. I can reverb the clip in the viewer but can't it won't drag to the timeline. I'm using FCE

    I'm trying to reverb an audio clip in my timeline and I can't find the effect tab in the browser to drag to my audio clip to reverb. I can reverb the clip in the viewer but it won't drag to the timeline. I'm using FCE

    You cannot drag the effects themselves to the timeline.  You add them to a clip in the Viewer, just as you have done. 
    If the clip was already in the timeline when you  opened it in the Viewer (by double-clicking it in the timeline to open it in the Viewer) and then added the reverb effect, there is nothing further to do, you have added the effect to the clip.  You don't drag it back to the timeline.
    You only have to drag the clip to the timeline if the clip was not already in the timeline (for example, if you opened the clip from the FCE Browser; or set different In and Out points in a master clip to use a different portion of the master clip in a different location in your timeline).
    Depending on the effect you add, you may have to render the timeline after adding the effect.  But I don't think reverb requires immediate rendering.  One other note, you said you were working with an audio clip ... audio clips need to be AIFF (not MP3 or something else) and preferably 16-bit stereo.

  • A while ago I wanted to download/buy an album on my iPhone 4 but I didnt have enough space so I deleted some stuff and downloaded the album. well ever since then my other music won't play, only that one album will play and none of my other music will play

    a while ago I wanted to buy an album but I didn't have enough space on my phone, (iPhone 4) so I deleted some things off my phone and downloaded the album. well ever since then all my other music won't play, only that one album will play. I thought it was because I havent been able to get the software update on my phone but I don't have enough space for that either. I deleted almost all my photos, all my apps, i deleted almost all the info that is on the apps that you can't delete, but it says I have too much music and I only have 45 songs!!!!!!!! and I don't want to delete them because that's what I'm trying to listen to but I can't because of whatever reason. PLEASE HELP!!

    1, you can't at the moment, though with iOS 5 in the Autumn, from http://www.apple.com/ios/ios5/features.html#photos :
    Even organize your photos in albums — right on your device
    2, by removing it from you synced from and re-syncing. Only photos taken with the iPad, copied to it via the camera connection kit, or saved from emails/websites etc can be deleted directly on the iPad (either via the trashcan icon in the top right corner if viewing the photo in full screen, or via the icon of the box with the arrow coming out of it in thumbnail view)
    3, the location of the photos that you synced to the iPad should be listed on the iPad's Photos tab when connected to your computer's iTunes.
    4, you can copy the photos from your iPad to your computer : http://support.apple.com/kb/HT4083 . You should also be able to delete them from the iPad as part of the transfer process to your computer, and it's then your choice whether to add them to your sync photo list so as to copy them back to the iPad. Copying them to your computer would allow you to organise them into folders and therefore be able to sync them back into separate albums.
    5, I don't use Dropbox either. There are some third-party browser apps in the iTunes App Store that allow you to download pages so that you can view them when offline e.g. Atomic Web (the whole page is saved within Atomic Web, it doesn't place a photo into the Photos app)
    6, deleting content should help. If you remove an app from your iPad then you also remove the content that it's got on the iPad - so if you then decide to reinstall it back onto the iPad then you will need to manually add back any content that you want in it. None of the Apple built-in apps (including Photos) can be removed from the iPad

  • Audio won't play after replacing the video clip with after effects composition?

    I am using CS5.  Still new to this stuff so let me know if you need extra info. None of the faq guides have been helpful.

    The audio is still in the project, but won't play in the canvas... this was solved by Richardttt... see this thread: http://discussions.apple.com/thread.jspa?threadID=1491870&tstart=0
    I tried this and it works but still don't know why it happened: Under Object Menu, select Unsolo>Video Only.

Maybe you are looking for