Audio won't play off the timeline

I have been working with a 17min. project shot in HDV and edited w FCP 6. I have tried a few different ways to get it out to DVD Pro through Compressor. I also tried to convert it from HDV to DV so I could take it back out to tape as a DV project. I went back to the project and tried to do another compressed version for DVD after being unsuccesful converting it to DV. So when I went to Compress it to a DVD there was no audio on the DVD. I went back into the FCP project and found that the audio does not play off the timeline anymore. The audio waves are still on the timeline and when I double click on the timeline it plays in my viewer. i checked the audio outputs but the audio is not showing on the LEDs in the audio mixer. Did something get changed because of my trying to export it?

If none of the above suggestions work toggle on the Audio Controls speaker icon (see image below) and if the speakers icon appear yellow single click them (same action can be performed in the audio mixer.
!http://i533.photobucket.com/albums/ee340/gogiangigo/AudioControls.jpg!
Luca

Similar Messages

  • Playing off the Timeline via firewire( XdCam pal) Monitoring Issues

    Hey,
    I have just switched to FCP and have found that when recording the from the FCP timeline manually via firewire into a Sony XDCam PDW530 I experience 4:3 flashes in the Camera monitor and viewfinder as the timeline plays down Video Transitions. All effects have been rendered (Blue line above transition)
    However the Camera appears to record correctly to disc. I played the recorded material from the camera via an XD deck into a wide screen monitor and all appears fine the 4:3 flashes are not present on transitions. play the disc back in the camera and the 4:3 flashes for the duration of the Video Transitions return????
    when playing out of the Camera via SDI and Analogue Composite outputs into a wide screen monitor all appears ok as well.
    It's a little odd that you cannot monitor the output correctly on the XDcam. If i change the pull down settings from 2323 to 2332 it monitors the transitions correctly but the video aspect is somewhere between 4:3 and 16:9.
    Shoot in 16:9 Capture DV Pal, Edit DV Pal, Playback Output Apple FireWire Pal (720 x 576)
    Any ideas????

    Thanks Shane,
    We have been down the PRINT TO VIDEO road with the same playback issues in the XD Camera's LCD screen. We still see the 4:3 transition on the 16:9 image when playing off the timeline / playing back the recorded media in the camera and viewing on cameras screen .
    I guess this is only a monitor issue. If you don't include any video effects it plays down 16:9 perfectly in the cameras monitor
    What is recorded onto the disc is fine.
    Also my understanding is the what's coming off the timeline is a DV stream so not sure how the GOP format comes into play. Recording onto a XD Cam off the timeline thru other edit programmes has never been an issue. I have come from Avid Pinnacle and the monitoring of transitions was never an issue when streaming back to the xdcam.
    Thanks

  • Audio won't play in the Viewer but will in the Canvas from the timeline.

    If I select a clip from the timeline to open in the viewer, I cannot hear the audio even though both video and audio are selected. This only happens in certain projects. Anyone know why?

    In the View menu, make sure the Audio Playback is set correctly.

  • Audio won't play from the start of the slide

    Good afternoon all,
    I'm new at this and recently created my first instructive
    demo. I recorded and have everything synching up fine but the audio
    in two of the slides WON'T start the audio from the first words
    recorded. The audio begins in the middle of the second or third
    word spoken.
    This only happens when I play the entire demo or from a
    certain point in the demo to the end. If I play the two slide with
    the audios indiviually you can hear my every word from start to
    finish and if I play the audio ONLY I hear it fine also.
    I have tried starting the audio a few seconds after the
    screen being demonstrated starts, re-recording the audio, adding
    silence in the beginning.........................anyone have any
    suggections. I've done everything I know to do but start over from
    scratch.........I didn't say that...........LOL!

    My suggestion was going to be ensure the audio file starts a
    second or
    two after the slide starts, but seems you're already doing
    that.
    So if you've tried all those things and no luck, then I'd
    recreate the
    slide entirely.
    Insert a blank slide, copy the background from the problem
    slide to the
    blank slide ('paste as background'), then insert the audio
    and test it.
    If it works as expected, then copy/paste any other screen
    elements from
    the problem slide, then delete that problem slide.
    Helps?
    Erik
    Neckbone2007 wrote:
    > I recorded
    > and have everything synching up fine but the audio in
    two of the slides WON'T
    > start the audio from the first words recorded.
    Erik Lord
    http://www.capemedia.net
    Adobe Community Expert - Authorware
    http://www.adobe.com/communities/experts/
    http://www.awaretips.net -
    samples, tips, products, faqs, and links!
    *Search the A'ware newsgroup archives*
    http://groups.google.com/group/macromedia.authorware

  • Audio won't play after audio render

    I have an MP3 on audio track 1 in Premiere/CS4, placed underneath video clips which I've unlinked from the audio and deleted/cleared those unlinked audio files.  The MP3 file plays fine until I render the timeline and then it stops playing.  If I 'double click' the file (placing it back in the source window) it plays fine there, but won't play in the timeline.  I've included the file properties below.  Does anyone have any idea why this is happening and what I can do to fix the problem?
    Type: MP3 Audio
    File Size: 4.2 MB
    Source Audio Format: 44100 Hz - compressed - Stereo
    Project Audio Format: 44100 Hz - 32 bit floating point - Stereo
    Total Duration: 00:03:03:32868
    Average Data Rate: 23 KB / second

    I could do a MP3 to WAV conversion, but that defeats the
    purpose of storing my (growing) music library in MP3 for space conservation.
    I understand the space problem. Only do this for files that you are using as Assets, Imported into PrPro, if they give you a problem.
    Seems I'm finding I have to do a lot of 'work arounds' with CS4.
    Well, it does seem that you are not alone on this one. However, my problem came with PrPro 2.0. In my case, it only happened once, but did affect about a dozen Audio files in several Sequences. Did not realize the magnitude of my issue, and only observed it after a busy day of trying to Keyframe some Effects and doing multiple Renders to check things out. One moment all Audio in that section was playing well - next moment (after one more Render) dead. Others, who replied to my thread indicated that it had happened to them too, in similar circumstances. Trouble was, none of us could duplicate it and some had this happen on their first Render, while I'd probably done a dozen that morning. Have never had it happen again, and finished that Project with hundreds more Renders, just like I'd done, with not one problem. I certainly can not call it a Bug, as there was no way for anyone to reproduce it. Still, whatever allows it to happen, under the right (or wrong) circumstances seems to be around two generations later. Hey, phases of the Moon?
    Good luck, and let's hope that neither of us sees this behavior again,
    Hunt

  • Help!! AVI audio won't play - Premiere Pro v.7

    Hi!
    I captured footage from my DV camera into Windows Movie Maker in the form of a DV-avi. (I use WMM because Premiere crashes when I try to capture DV video). And when I import the AVI into Premiere Pro v.7 the audio won't play in the project window. However, when I scrub the slider back and forth the audio does play (kind of).
    I have never had this problem before. I've captured video many times and this never happened.
    I tried re-capturing it 6 times, but still the audio doesn't play (except when I scrub).
    Is there an option I clicked accidentally?
    Any help would be really great.
    Thanks a lot!
    -R

    John T Smith wrote:
    I think WMM creates type 1 files and Premiere needs type 2
    You might Google for a converter
    You might also use the free http://www.headbands.com/gspot to find out the file details, and report back so someone may be able to help
    I installed that program. Very helpful and interesting. Thanks for the link.
    I assumed, like you, that I had simply captured the AVI files as Type 1. But I guess they are Type 2, after all.
    I don't know if this helps, but the AVIs play just fine in Quicktime, Windows Media Player, WMM and Winamp.
    Thanks again for your help.
    Here is the information gspot provided:
    FILE_NAME                      tape6_raw0001.avi
    FILE_NAME_WITH_PATH            O:\EDITING\In the Woods\Tape 6\clips\tape6_raw0001.avi
    FILE_SIZE                      90,872,392
    CONT_AUDIO_STREAM_COUNT        1
    CONT_BASETYPE                  AVI(.AVI)
    CONT_BYTES_MISSING             0
    CONT_INTERLEAVE_ALIGN         
    CONT_INTERLEAVE_PRELOAD       
    CONT_INTERLEAVE_TIME          
    CONT_SUBTYPE                   OpenDML (AVI v2.0),
    CONT_TOTAL_BITRATE             0
    VIDEO_ASPECT_CONVERT_AVI1      Resize to 656 x 480 (Use +/- for other target sizes)
    VIDEO_ASPECT_CONVERT_AVI2      Crop off any non-picture areas, if req'd
    VIDEO_ASPECT_CONVERT_CVD1      Resize to 360 x 480  ( w:[1/2]  h:[1/1] )
    VIDEO_ASPECT_CONVERT_CVD2      Trim 4 from each side for 352 x 480
    VIDEO_ASPECT_CONVERT_DVD1      No resize req'd
    VIDEO_ASPECT_CONVERT_DVD2      No cropping req'd
    VIDEO_ASPECT_CONVERT_SVCD1     Resize to 480 x 480  ( w:[2/3]  h:[1/1] )
    VIDEO_ASPECT_CONVERT_SVCD2     No cropping req'd
    VIDEO_ASPECT_CONVERT_VCD1      Resize to 360 x 240  ( w:[1/2]  h:[1/2] )
    VIDEO_ASPECT_CONVERT_VCD2      Trim 4 from each side for 352 x 240
    VIDEO_ASPECT_SOURCE_MATCH      DVD
    VIDEO_ASPECT_TYPE_NTSC         NTSC
    VIDEO_ASPECT_TYPE_PAL         
    VIDEO_BITRATE                  28771
    VIDEO_CODEC_NAME               DVC/DV Video
    VIDEO_CODEC_STATUS             Codec(s) are Installed
    VIDEO_CODEC_TYPE               dvsd
    VIDEO_DAR                      1.333
    VIDEO_DURATION                 0:24.291
    VIDEO_FIELDS_PER_SEC           59.940
    VIDEO_FRAME_COUNT              728
    VIDEO_FRAMES_PER_SEC           29.970
    VIDEO_H264                    
    VIDEO_MPEG2                   
    VIDEO_MPEG2_3X2               
    VIDEO_MPEG2_BFF               
    VIDEO_MPEG2_I_L               
    VIDEO_MPEG2_PPF               
    VIDEO_MPEG2_PROG              
    VIDEO_MPEG2_TFF               
    VIDEO_MPEG4                   
    VIDEO_MPEG4_BVOP              
    VIDEO_MPEG4_GMC               
    VIDEO_MPEG4_NVOP              
    VIDEO_MPEG4_QPEL              
    VIDEO_PAR                      0.889
    VIDEO_PICS_PER_SEC             29.970
    VIDEO_QF                       2.778
    VIDEO_SAR                      1.500
    VIDEO_SIZE_X                   720
    VIDEO_SIZE_Y                   480
    AUDIO_BITRATE                  1024
    AUDIO_BITRATE_TYPE            
    AUDIO_CHANNEL_COUNT            2
    AUDIO_CODEC                    PCM Audio
    AUDIO_CODEC_STATUS             No Codec Required
    AUDIO_MPEG_STREAM_ID          
    AUDIO_MPEG_SUBSTREAM_ID       
    AUDIO_SAMPLE_RATE              32000

  • I'm trying to reverb an audio clip in my timeline and I can't find the effect tab in the browser to drag to my audio clip to reverb. I can reverb the clip in the viewer but can't it won't drag to the timeline. I'm using FCE

    I'm trying to reverb an audio clip in my timeline and I can't find the effect tab in the browser to drag to my audio clip to reverb. I can reverb the clip in the viewer but it won't drag to the timeline. I'm using FCE

    You cannot drag the effects themselves to the timeline.  You add them to a clip in the Viewer, just as you have done. 
    If the clip was already in the timeline when you  opened it in the Viewer (by double-clicking it in the timeline to open it in the Viewer) and then added the reverb effect, there is nothing further to do, you have added the effect to the clip.  You don't drag it back to the timeline.
    You only have to drag the clip to the timeline if the clip was not already in the timeline (for example, if you opened the clip from the FCE Browser; or set different In and Out points in a master clip to use a different portion of the master clip in a different location in your timeline).
    Depending on the effect you add, you may have to render the timeline after adding the effect.  But I don't think reverb requires immediate rendering.  One other note, you said you were working with an audio clip ... audio clips need to be AIFF (not MP3 or something else) and preferably 16-bit stereo.

  • Audio won't play after replacing the video clip with after effects composition?

    I am using CS5.  Still new to this stuff so let me know if you need extra info. None of the faq guides have been helpful.

    The audio is still in the project, but won't play in the canvas... this was solved by Richardttt... see this thread: http://discussions.apple.com/thread.jspa?threadID=1491870&tstart=0
    I tried this and it works but still don't know why it happened: Under Object Menu, select Unsolo>Video Only.

  • HT4211 My audio apps keep playing in the background after I answer a phone call. How do I turn this off?

    My audio apps keep playing in the background after I answer a phone call. How do I turn this off?

    Hello BobWeaver,
    It sounds like we need to troubleshoot the software on your device as that is not expected behavior.
    I would perform steps 1, 3 and 5 from the iPhone Troubleshooting Assistant found here http://www.apple.com/support/iphone/assistant/phone/. If you get to step 3, then I suggest closing all the apps. Here is step 1 to get you started:
    Restart iPhone
    To restart iPhone, first turn iPhone off by pressing and holding the Sleep/Wake button until a red slider appears. Slide your finger across the slider and iPhone will turn off after a few moments.
    Next, turn iPhone on by pressing and holding the Sleep/Wake button until the Apple logo appears.
    Is iPhone not responding? To reset iPhone, press and hold the Sleep/Wake button and the Home button at the same time for at least 10 seconds, until the Apple logo appears.
    If your device does not turn on or displays a red battery icon, try recharging next.
    Cheers,
    Sterling

  • Video audio continues to play in the background

    I have created a close button that should stop the video from playing, thus closing out of the video and returning to the main menu. But the video audio continues to play in the background.
    Does anyone know how I can get the video to pause/stop playing at the same time as it returns to the main menu and after clicking on the close button?
    This is what I have to play the video:
    var videoStage = sym.$("videoPlayStage");
    videoStage.html('<video id="myvideo" width= "640" height= "360" src = "composition2/myvideo.mp4" poster="images/poster" type= "video/mp4" controls = "controls"></video>');
    sym.$("videoPlayStage").show();
    close button
    I have a trigger:
    "off"
    sym.$("#D39").pause();
    It is not working.

    Here is the code that I put on my close button to make the video pause when closed ("Nat_League_Back" is the place on the timeline that I want to direct the user to when the video is closed):
    sym.play("Nat_League_Back");
    // Pause a video track
    sym.$("BaseballVideo")[0].pause();

  • Premiere Elements 4 audio won't play on mp4 files, codecs missing/unavailable on .mov files

    I dowlnloaded Premiere Elements 4, and when I import mp4 files, the video plays but the audio will not. I've also tried to import .mov files, and an error message pops up that says "Codec missing or unavailable." I downloaded the latest version of Quicktime, but that didn't change anything. The files will play back on the video camera, but I"m having trouble with them on my computer. The audio on the mp4 files plays in Quicktime, but not the video, and vice versa when I import them into Elements. Any suggestions?

    Does Quicktime Pro also edit .mov files on a PC?
    Date: Wed, 27 Nov 2013 07:53:14 -0800
    From: [email protected]
    To: [email protected]
    Subject: Premiere Elements 4 audio won't play on mp4 files, codecs missing/unavailable on .mov files
        Re: Premiere Elements 4 audio won't play on mp4 files, codecs missing/unavailable on .mov files
        created by Steve Grisetti in Premiere Elements - View the full discussion
    Premiere Elements 4 pretty much works with tape-based digital video. That would be video from a miniDV or HDV tape-based camcorder. It doesn't handle other formats very well.
    If you plan to edit MP4s, you definitely want to upgrade to a more current version of the program. If you can't install a current version of the program, you may need to address issues on your computer (such as an outdated operating system or underpowered hardware configuration).
    Short of that, you could buy Quicktime Pro from Apple for $29. It will edit MP4s, even on a PC platform.
         Please note that the Adobe Forums do not accept email attachments. If you want to embed a screen image in your message please visit the thread in the forum to embed the image at http://forums.adobe.com/message/5879880#5879880
         Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: http://forums.adobe.com/message/5879880#5879880
         To unsubscribe from this thread, please visit the message page at http://forums.adobe.com/message/5879880#5879880. In the Actions box on the right, click the Stop Email Notifications link.
               Start a new discussion in Premiere Elements at Adobe Community
      For more information about maintaining your forum email notifications please go to http://forums.adobe.com/thread/416458?tstart=0.

  • My project in imovie says source unavailable after I moved the events to the backup drive. It is connected and shows up in the events library. I can see the pictures but they won't play without the source. What do I do.

    My project in imovie says source unavailable after I moved the events to the backup drive. It is connected and shows up in the events library. I can see the pictures but they won't play without the source. What do I do.

    I moved it because I did not have room on my hard drive to import my latest video. I take videos my grandkids basketball games then edit them as projects. I don't have room to move the whole events library back to my hard drive. Can I move part of it at a time.
    I filled up my 1 TB back up drive so got a 3TB to move my video projects to. Do I have to move both the i photo videos and the projects to the 3 TB drive together some how. When can I delete them off the hard drive .
    I moved all the i photo library to the 3 TB drive and deleted them out of i photo. That is 87 GB which I don't have room for on my hard drive.
    I think when I use the export movie to my hard drive it works but will I still be able to edit it later if I want. Is it best to do quick time or i tunes if I use the export feature.

  • Premiere Elements 9 won't render in the timeline.

    Hey hope all is well.
    I created a project in PE 4. Well, in what's looking like a not-so-smart-move midproject, I upgraded to PE 9. I opened the original PE 4 projectin PE 9 and it plays fine but won't render in the timeline. So, all of my effects and such won't render for a preview. This is actually an important project so any help would he appreciate. Thanks!
    mck

    This kind of behavior is common when a project is created with one version of the program and then opened with a newer version. This is why many of us on the forum (and I, in my book) recommend not doing this.
    It's best to finish your version 4 project in version 4 and than start a fresh project in version 9.

  • I rented a movie on Apple TV and it started to load then froze, now I get one of two errors "error loading content" or "movie will be ready to watch in 1 minute"... after trying repeatedly ,it still won't play. The movie rental is going to expire.

    i've tried this repeatedly for the past 6 hours. Rebooted, etc. I can stream movies from netflix and hulu but the movie i rented won't play. The timer is ticking becuase it started then froze but now it won't load.

    force quit app.  double click home button and slide app up and off page
    Peace, Clyde

  • Audio won't play on MPEG files from camera?

    I'm having issues with my new video camera. I want to use my final cut express to edit the videos, but the audio on the video files won't play. The videos play just fine, just no sound. I've turned the volume all the way up on my mac, but still nothing.
    Any suggestions to make the audio work?
    (I'm not the most familiar with computers, so simple/specific instructions would be best)

    You have to separate out the audio and video tracks (referred to as "demuxing") of an MPEG-1 or MPEG-2 file before you import it into FCE. Try MPEG StreamClip to convert the MPEG files into an editing format (DV Stream, for instance). If your camera outputs MPEG-2, you'll also need the MPEG-2 Playback Component.
    Hope this helps.

Maybe you are looking for