Audio won't stop!

I am a newbie to Flash and I have a couple of questions:
1. Should I be importing audio files into the Library and
putting them on a layer in the Flash file?
2. When I do this, the .swf doesn't sound very good. I am
starting with wav files.
3. The sound file on the timeline will play from beginning to
end even if the user clicks a button directing him to another frame
(with another sound). Then there are two sound files playing at the
same time. If you're a fast clicker, you can really get wild.
Anne

pixelcat wrote:
> 1. Should I be importing audio files into the Library
and putting them on a
> layer in the Flash file?
Should or shouldn't depends on how you plan to use your sound
- so many types of sounds can be used
for so many different reasons in flash (looping backgrounds,
soundtracks, button rollOvers, etc...).
So to answer this, one would need to know what the sound is
and how you plan to use it.
> 2. When I do this, the .swf doesn't sound very good. I
am starting with wav
> files.
You should read some of the help files in regards to sound in
flash and publish settings. Flash uses
Mp3 compression and by default the compression is set very
high. You simply need to adjust this for
the best trade-off on file size and quality.
> 3. The sound file on the timeline will play from
beginning to end even if the
> user clicks a button directing him to another frame
(with another sound). Then
> there are two sound files playing at the same time. If
you're a fast clicker,
> you can really get wild.
That's because sound is set to Event (Properties Panel) by
default and flash basically sends it to
your sound card and forgets about it. To stop it hit your ESC
key. If you are trying to animate in
sync with the sound, set it to Stream (properties Panel).
--> **Adobe Certified Expert**
--> www.mudbubble.com
--> www.keyframer.com

Similar Messages

Audio Won't Stop when Previewing

So, I have a 3 minute mp3 file on my stage; the idea is to provide background music for my animation. So I go to preview the animation, and everything works fine, until I stop the preview. Then the audio keeps playing on and on. If I hit the preview again, obviously the music starts up again, and then won't stop, in a vicious circle of death that has me fleeing from the room.
To make it clear, I'm not previewing the audio file, I'm previewing the entire animation with the audio file on the stage. Thank you for your help!

Okay, I solved it myself but I thought I'd post the solution here for newbies like myself who can't seem to locate anything useful in Adobe's help systems.
When you set up an audio file, import it into your Library and not the stage. Set up a layer for your background music, add a keyframe (name it something appropriate, and then in the frame properties, you can set a sound.
Under "name" select the audio file you imported. The other important bit is to select "stream" under Sync. This will make the audio play only when and where the movie plays. Handy.

Flash Pop-Up Videos. Audio won't stop playing...

Hi. I am using a pop-up script to play some .flv videos on my
website. However, after you take the mouse off of the jpeg image
the video goes away, but the audio continues. Is there anything I
can put in my script to make the whole video stop playing? Is there
somekind of onmouseout tag or something that will stop the whole
thing?
Here is the mouseover code:
<a href="
http://www.mywebsite.com"><img
src="productimages4/%VAR(Products.d.code)%.jpg" width="111"
height="70"
onmouseover="showtrail('previews/flash/%VAR(Products.d.code)%256k.flv');"
onmouseout="hidetrail();" border="0"><br>
</a>
Thanks for any help!
Judge

Every time I've broken down and sent a question to the discussion board, I figure out the problem myself right afterwards. I worked at it for three days before submitting the question, then figured it out about 30 minutes later.
I was using INSERT - ANIMATION to insert the animation on a blank slide.
I found that what I SHOULD have been doing is using INSERT - OTHER SLIDES - ANIMATION SLIDE because that works beautifully.

Streaming audio data won't stop unless I turn off the phone for 5 minutes.

I have been testing the Curve 8330 regarding streaming audio from an icecast server. The address of the station is http://www.AirProgressive.org, click on "listen". (I have already run this by the icecast experts and they say it is a Blackberry "bug")
BLACKBERRY USERS! PLEASE BE AWARE THAT THE STREAM (dataflow) DOES NOT STOP WHEN YOU CLICK "STOP" ON THE MEDIA PLAYER! (and will continue for as long as you leave it on, and even if you turn off your BB for less than 5 Minutes.) I'm not sure if you are charged for these streams, but it seems that the battery is depleted rapidly if this continues without aborting it. See details of my testing below:
> Access icecast stream by clicking on the link on the website:
     http://www.airprogressive.org:8000/stream.m3u
> Stream consists of mp3 at 32kbps / 22050 Hz.
> Stock media player launches, stops at "Do you want to open or save the item."
    > No connections started yet (viewing "List Clients" page of icecast admin interface).
> Click "open", stream begins playing.
> Two connections are started instead of just one, always offset by 2 seconds.
    -- but sometimes only one connection starts.
> FYI, Icecast config: <client-timeout>30</client-timeout>
Here is the output from the "List Clients" page of Icecast2 Admin
IP
Seconds Connected
User Agent
Action
68.7.238.55
406
WinampMPEG/5.62, Ultravox/2.1
Kick
74.82.68.16
6
Mozilla/4.8 [en] (Windows NT 5.0; U)
Kick
74.82.68.16
4
Mozilla/4.8 [en] (Windows NT 5.0; U)
Kick
Note the last two entries with the same IP address. This is the Blackberry. Top entry is winamp player on PC for reference. Don't know why two listener connections are generated.
> Stream is "Stopped" (i.e. click stop)
> Stream is restarted (i.e. click Play)
> A new connection is started, this time with a new +1 IP address.
IP
Seconds Connected
User Agent
Action
68.7.238.55
687
WinampMPEG/5.62, Ultravox/2.1
Kick
74.82.68.16
287
Mozilla/4.8 [en] (Windows NT 5.0; U)
Kick
74.82.68.16
285
Mozilla/4.8 [en] (Windows NT 5.0; U)
Kick
74.82.68.17
8
Mozilla/4.8 [en] (Windows NT 5.0; U)
Kick
I can understand that the player may continue to communicate when "stopped" to fill the lookahead buffer, but when it is restarted, it should use the same connection and not start a new one.
> Click Stop.
> Click Play.
IP
Seconds Connected
User Agent
Action
68.7.238.55
803
WinampMPEG/5.62, Ultravox/2.1
Kick
74.82.68.16
403
Mozilla/4.8 [en] (Windows NT 5.0; U)
Kick
74.82.68.16
401
Mozilla/4.8 [en] (Windows NT 5.0; U)
Kick
74.82.68.17
124
Mozilla/4.8 [en] (Windows NT 5.0; U)
Kick
74.82.68.18
24
Mozilla/4.8 [en] (Windows NT 5.0; U)
Kick
> Yet another connection is started with a new "listener".
> Click "back" to exit from browser in Blackberry.
> All threads continue.
    --> I have tested this many times and the threads continue without being cleaned up indefinitely, even though the player is stopped and the stream is not "playing" on the handset.
> Turn off mobile network. Handset not communicating.
> Threads continue
> Handheld turned off.
IP
Seconds Connected
User Agent
Action
68.7.238.55
995
WinampMPEG/5.62, Ultravox/2.1
Kick
74.82.68.16
595
Mozilla/4.8 [en] (Windows NT 5.0; U)
Kick
74.82.68.16
593
Mozilla/4.8 [en] (Windows NT 5.0; U)
Kick
74.82.68.17
316
Mozilla/4.8 [en] (Windows NT 5.0; U)
Kick
74.82.68.18
216
Mozilla/4.8 [en] (Windows NT 5.0; U)
Kick
Finally, after over 300 seconds, the threads are finally cleaned up.
IP
Seconds Connected
User Agent
Action
68.7.238.55
1139
WinampMPEG/5.62, Ultravox/2.1
Kick
So, to stop the streaming server from communicating with the Blackberry handset, you must either turn it off or disable mobile network for at least 5 minutes.
It appears that the handset continues to transfer data (and therefore incur charges, if the user does not have an unlimited data plan) if the handset is not turned off or mobile network disabled for at least five minutes. It also runs down the battery much faster because the radio transmitter is actively being used, even if the user is not listening to the stream.
The Blackberry network has intervening servers that continue to receive data from the streaming server even if the handset is off. This behavior likely has utility to deal with the realities of the cellphone network, to allow the stream to be transferred from one cell to another, and deal with the possibility that the handset may be out of range for up to 5 minutes without "interruption." However, it is hard to turn off the stream.
QUESTIONS:
1. Is there a way to stop this sort of behavior using a configuration setting or something? It seems particularly stupid to start a new stream connection each time a STOP/START cycle is completed, allowing the old connections to continue streaming data (even if the data does not make it to the handset).
2. IS IT TRUE that the user will be "charged" for the data streams that are not disconnected?
3. Is there a way for a developer to send a signal to the intervening cellphone network to discontinue the orphan streams?
THANKS!!

No, I'm using something like this :
to start...
                   channel = new SoundChannel();
                                        soundPlay = new Sound();
                                        urlReq=new URLRequest;
                                        urlReq.url=mylUrl; // url of radio mp3
                                        soundPlay.load(urlReq);
                   channel = soundPlay.play();
to stop it...
                      channel.stop();
                      channel=null;
                      try{soundPlay.close();} catch (e:Error) {} // error or not, the sream won't stop.
Any idea ? Did you try with a NetStream object ?
Bernard

AIR for Android: Streaming audio data won't stop unless I quit....

I write an application (AIR-Android with Flash Builder) which can play internet radio stations (streamed audio in mp3).
When I want to stop the stream like myChannel.stop() / mySound.close(); the sound is stopping but the stream is still loading (I can see it with a network monitor app).
Streaming audio data won't stop unless I quit the application or I switch my connection from WIFI to 3G or from 3G to WIFI.
I do not have this problem with Air for Mac and IOS.
How can I solve this problem ?
Bernard

Hi Chris,
I received a response from a certain Wang Zhe (from Adobe) about this bug.
https://bugbase.adobe.com/index.cfm?event=bug&id=3070987
It should provide an example of his test that apparently it worked but I have still no answer from him.
Is it possible to contact him directly?

Audio error message on playback and P Pro CS6 won't stop playback. Have to force quit.

Hello: I'm getting an audio error message on playback and P Pro CS6 won't stop playback. Have to force quit.
Earlier in the project, I would crash when moving audio up/down tracks or up/down time line.
Any thoughts?
Thanks,
Tolbert
Mac/12 core/32G ram

That screenshot will help us figure out what's going wrong, but I won't have any news until at least July 8 because our offices are shut down next week. In the meantime, two suggestions:
Download CC and see if this crash occurs in the new version.
Google cpp-99 premiere pro audio prefetch. I got several hits, but not dig into them to see if any had a solution or workaround.

Premiere Elements 4 audio won't play on mp4 files, codecs missing/unavailable on .mov files

I dowlnloaded Premiere Elements 4, and when I import mp4 files, the video plays but the audio will not. I've also tried to import .mov files, and an error message pops up that says "Codec missing or unavailable." I downloaded the latest version of Quicktime, but that didn't change anything. The files will play back on the video camera, but I"m having trouble with them on my computer. The audio on the mp4 files plays in Quicktime, but not the video, and vice versa when I import them into Elements. Any suggestions?

Does Quicktime Pro also edit .mov files on a PC?
Date: Wed, 27 Nov 2013 07:53:14 -0800
From: [email protected]
To: [email protected]
Subject: Premiere Elements 4 audio won't play on mp4 files, codecs missing/unavailable on .mov files
    Re: Premiere Elements 4 audio won't play on mp4 files, codecs missing/unavailable on .mov files
    created by Steve Grisetti in Premiere Elements - View the full discussion
Premiere Elements 4 pretty much works with tape-based digital video. That would be video from a miniDV or HDV tape-based camcorder. It doesn't handle other formats very well.
If you plan to edit MP4s, you definitely want to upgrade to a more current version of the program. If you can't install a current version of the program, you may need to address issues on your computer (such as an outdated operating system or underpowered hardware configuration).
Short of that, you could buy Quicktime Pro from Apple for $29. It will edit MP4s, even on a PC platform.
     Please note that the Adobe Forums do not accept email attachments. If you want to embed a screen image in your message please visit the thread in the forum to embed the image at http://forums.adobe.com/message/5879880#5879880
     Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: http://forums.adobe.com/message/5879880#5879880
     To unsubscribe from this thread, please visit the message page at http://forums.adobe.com/message/5879880#5879880. In the Actions box on the right, click the Stop Email Notifications link.
           Start a new discussion in Premiere Elements at Adobe Community
For more information about maintaining your forum email notifications please go to http://forums.adobe.com/thread/416458?tstart=0.

How do I get this audio clip to stop processing

I am wondering how to get this AudioClip to end. Even though it stops after 4 iterations from the for loop in main my application continues running until I hit ctrl-c. I don't want to use System.exit( 0 ) because other applications will be running and I don't want to shut them down. For now just the basics, getting this process to quit on its own. I figured I would have to close the file with file.close( ), but no luck. Help would be appreciated thank you.
import java.io.*;
public class PlaySound {
     static String fnm = new String("attention.wav");
     static java.applet.AudioClip clip = null;
     java.io.File file = new java.io.File( fnm );
     public PlaySound( )
          try
               clip = java.applet.Applet.newAudioClip( file.toURL() );
          catch( Exception e )
               e.printStackTrace( );
     public void makeAlarmNoise( )
          clip.play();   //plays the audio clip
          //sleep for a while so it doesn't cluster the sounds
          try
               Thread.sleep( 1000 );
          catch( InterruptedException e ){ }
     } //end of method makeAlarmNoise
     public void stopNoise( )
          clip.stop( );
     public static void main( String Args[ ] )
          PlaySound ps = new PlaySound( );
          for( int i = 0; i < 5; i++ )
          ps.makeAlarmNoise( );
          ps.stopNoise( );
}

No it doesn't -- thanks for the reply though.
The process keeps running even after it is done playing the wav file. I hear no sound but the process must still be running if I does not come to an end.
IT WON"T STOP. PLEASE MAKE IT STOP.
ex> when you run a "hello world" program the program runs and prints "hello world" then brings you back to the command line.
In my program, the program runs and then just sits there -- never bringing me back to the command line. I am wondering how to do that without System.exit( 0 ). Because when I use a GUI and use eventHandlers it still will not stop processing.
Try running this program with a short wave (.wav) file and you'll see what I mean.
Thank you.

Calendar alert post-Mavericks installation won't stop chiming

Installed Mavericks yesterday over Snow Leopard (10.6.8) and have had a host of problems that have paralysed my computer use. As someone who's not particularly tech-savvy and relies on their Mac for their living, this has been a nightmare. The most irritating problem has been that I use the glass chime for my calendar alert. Well, it won't stop ringing--it's like a button's depressed and stuck in that position. Can anyone help? It renders the audio unusable now, which means no VOIP calling or audio of any kind as I'm forced to keep it on mute. And I can't find anything on the Internet that indicates anyone else has had the same problem. Can anyone help? (And no idea if this is connected but my mouse is fluttering all over the place, which is yet another annoyance, leaving me wondering why I was so stupid as to upgrade.)
Thanks!!

1. This procedure is a diagnostic test. It changes nothing, for better or worse, and therefore will not, in itself, solve the problem. But with the aid of the test results, the solution may take a few minutes, instead of hours or days.
Don't be put off merely by the seeming complexity of these instructions. The process is much less complicated than the description. You do harder tasks with the computer all the time.
2. If you don't already have a current backup, back up all data before doing anything else. The backup is necessary on general principle, not because of anything in the test procedure. Backup is always a must, and when you're having any kind of trouble with the computer, you may be at higher than usual risk of losing data, whether you follow these instructions or not.
There are ways to back up a computer that isn't fully functional. Ask if you need guidance.
3. Below are instructions to run a UNIX shell script, a type of program. As I wrote above, it changes nothing. It doesn't send or receive any data on the network. All it does is to generate a human-readable report on the state of the computer. That report goes nowhere unless you choose to share it. If you prefer, you can read it yourself without disclosing the contents to me or anyone else.
You should be wondering whether you can believe me, and whether it's safe to run a program at the behest of a stranger. In general, no, it's not safe and I don't encourage it.
In this case, however, there are a couple of ways for you to decide whether the program is safe without having to trust me. First, you can read it. Unlike an application that you download and click to run, it's transparent, so anyone with the necessary skill can verify what it does.
You may not be able to understand the script yourself. But variations of the script have been posted on this website thousands of times over a period of years. The site is hosted by Apple, which does not allow it to be used to distribute harmful software. Any one of the millions of registered users could have read the script and raised the alarm if it was harmful. Then I would not be here now and you would not be reading this message.
Nevertheless, if you can't satisfy yourself that these instructions are safe, don't follow them. Ask for other options.
4. Here's a summary of what you need to do, if you choose to proceed:
☞ Copy a line of text in this window to the Clipboard.
☞ Paste into the window of another application.
☞ Wait for the test to run. It usually takes a few minutes.
☞ Paste the results, which will have been copied automatically, back into a reply on this page.
The sequence is: copy, paste, wait, paste again. You don't need to copy a second time. Details follow.
5. You may have started the computer in "safe" mode. Preferably, these steps should be taken in “normal” mode, under the conditions in which the problem is reproduced. If the system is now in safe mode and works well enough in normal mode to run the test, restart as usual. If you can only test in safe mode, do that.
6. If you have more than one user, and the one affected by the problem is not an administrator, then please run the test twice: once while logged in as the affected user, and once as an administrator. The results may be different. The user that is created automatically on a new computer when you start it for the first time is an administrator. If you can't log in as an administrator, test as the affected user. Most personal Macs have only one user, and in that case this section doesn’t apply. Don't log in as root.
7. The script is a single long line, all of which must be selected. You can accomplish this easily by triple-clicking anywhere in the line. The whole line will highlight, though you may not see all of it in the browser window, and you can then copy it. If you try to select the line by dragging across the part you can see, you won't get all of it.
Triple-click anywhere in the line of text below on this page to select it:
PATH=/usr/bin:/bin:/usr/sbin:/sbin:/usr/libexec;clear;cd;p=(Software Hardware Memory Diagnostics Power FireWire Thunderbolt USB Fonts SerialATA 4 1000 25 5120 KiB/s 1024 85 \\b%% 20480 1 MB/s 25000 ports ' com.clark.\* \*dropbox \*GoogleDr\* \*k.AutoCAD\* \*k.Maya\* vidinst\* ' DYLD_INSERT_LIBRARIES\ DYLD_LIBRARY_PATH -86 "` route -n get default|awk '/e:/{print $2}' `" 25 N\\/A down up 102400 25600 recvfrom sendto CFBundleIdentifier 25 25 25 1000 MB com.apple.AirPortBaseStationAgent 464843899 51 5120 files );N5=${#p[@]};p[N5]=` networksetup -listnetworkserviceorder|awk ' NR>1 { sub(/^$[0-9]+$ /,"");n=$0;getline;} $NF=="'${p[26]}')" { sub(/.$/,"",$NF);print n;exit;} ' `;f=('\n%s: %s\n' '\n%s\n\n%s\n' '\nRAM details\n%s\n' %s\ %s '%s\n-\t%s\n' );S0() { echo ' { q=$NF+0;$NF="";u=$(NF-1);$(NF-1)="";gsub(/^ +| +$/,"");if(q>='${p[$1]}') printf("%s (UID %s) is using %s '${p[$2]}'",$0,u,q);} ';};s=(' /^ *$|CSConfigDot/d;s/^ */ /;s/[-0-9A-Fa-f]{22,}/UUID/g;s/(ochat)\.[^.]+(\..+)/\1\2/;/Shared/!s/\/Users\/[^/]+/~/g ' ' s/^ +//;/de: S|[nst]:/p;' ' {sub(/^ +/,"")};/er:/;/y:/&&$2<'${p[10]} ' 1s/://;3,6d;/[my].+:/d;s/^ {4}//;H;${ g;s/\n$//;/s: [^EO]|x([^08]|02[^F]|8[^0])/p;} ' ' 5h;6{ H;g;/P/!p;} ' ' ($1~/^Cy/&&$3>'${p[11]}')||($1~/^Cond/&&$2!~/^N/) ' ' /:$/{ N;/:.+:/d;s/ *://;b0'$'\n'' };/^ *(V.+ [0N]|Man).+ /{ s/ 0x.... //;s/[()]//g;s/(.+: )(.+)/ (\2)/;H;};$b0'$'\n'' d;:0'$'\n'' x;s/\n\n//;/Apple[ ,]|Genesy|Intel|SMSC/d;s/\n.*//;/\)$/p;' ' s/^.*C/C/;H;${ g;/No th|pms/!p;} ' '/= [^GO]/p' '{$1=""};1' ' /Of/!{ s/^.+is |\.//g;p;} ' ' $0&&!/ / { n++;print;} END { if(n<200) print "com.apple.";} ' ' $3~/[0-9]:[0-9]{2}$/ { gsub(/:[0-9:a-f]{14}/,"");} { print|"tail -n'${p[12]}'";} ' ' NR==2&&$4<='${p[13]}' { print $4;} ' ' END { $2/=256;if($2>='${p[15]}') print int($2) } ' ' NR!=13{next};{sub(/[+-]$/,"",$NF)};'"`S0 21 22`" 'NR!=2{next}'"`S0 37 17`" ' NR!=5||$8!~/[RW]/{next};{ $(NF-1)=$1;$NF=int($NF/10000000);for(i=1;i<=3;i++){$i="";$(NF-1-i)="";};};'"`S0 19 20`" 's:^:/:p' '/\.kext\/(Contents\/)?Info\.plist$/p' 's/^.{52}(.+) <.+/\1/p' ' /Launch[AD].+\.plist$/ { n++;print;} END { print "'${p[41]}'";if(n<200) print "/System/";} ' '/\.xpc\/(Contents\/)?Info\.plist$/p' ' NR>1&&!/0x|\.[0-9]+$|com\.apple\.launchctl\.(Aqua|Background|System)$|'${p[41]}'/ { print $3;} ' ' /\.(framew|lproj)|\):/d;/plist:|:.+(Mach|scrip)/s/:[^:]+//p ' '/^root$/p' ' !/\/Contents\/.+\/Contents|Applic|Autom|Frameworks/&&/Lib.+\/Info.plist$/ { n++;print;} END { if(n<1100) print "/System/";} ' '/^\/usr\/lib\/.+dylib$/p' ' /Temp|emac/{next};/(etc|Preferences|Launch[AD].+)\// { sub(".(/private)?","");n++;print;} END { print "'${p[41]}'.plist\t'${p[42]}'";if(n<500) print "Launch";} ' ' /\/(Contents\/.+\/Contents|Frameworks)\/|\.wdgt\/.+\.([bw]|plu)/d;p;' 's/\/(Contents\/)?Info.plist$//;p' ' { gsub("^| |\n","\\|\\|kMDItem'${p[35]}'=");sub("^...."," ") };1 ' p '{print $3"\t"$1}' 's/\'$'\t''.+//p' 's/1/On/p' '/Prox.+: [^0]/p' '$2>'${p[43]}'{$2=$2-1;print}' ' BEGIN { i="'${p[26]}'";M1='${p[16]}';M2='${p[18]}';M3='${p[31]}';M4='${p[32]}';} !/^A/{next};/%/ { getline;if($5<M1) a="user "$2"%, system "$4"%";} /disk0/&&$4>M2 { b=$3" ops/s, "$4" blocks/s";} $2==i { if(c) { d=$3+$4+$5+$6;next;};if($4>M3||$6>M4) c=int($4/1024)" in, "int($6/1024)" out";} END { if(a) print "CPU: "a;if(b) print "I/O: "b;if(c) print "Net: "c" (KiB/s)";if(d) print "Net errors: "d" packets/s";} ' ' /r\[0\] /&&$NF!~/^1(0|72\.(1[6-9]|2[0-9]|3[0-1])|92\.168)\./ { print $NF;exit;} ' ' !/^T/ { printf "(static)";exit;} ' '/apsd|BKAg|OpenD/!s/:.+//p' ' (/k:/&&$3!~/(255\.){3}0/ )||(/v6:/&&$2!~/A/ ) ' ' $1~"lR"&&$2<='${p[25]}';$1~"li"&&$3!~"wpa2";' ' BEGIN { FS=":";p="uniq -c|sed -E '"'s/ +\$[0-9]+\$\$.+\$/\\\2 x\\\1/;s/x1$//'"'";} { n=split($3,a,".");sub(/_2[01].+/,"",$3);print $2" "$3" "a[n]$1|p;b=b$1;} END { close(p) if(b) print("\n\t* Code injection");} ' ' NR!=4{next} {$NF/=10240} '"`S0 27 14`" ' END { if($3~/[0-9]/)print$3;} ' ' BEGIN { L='${p[36]}';} !/^[[:space:]]*(#.*)?$/ { l++;if(l<=L) f=f"\n "$0;} END { F=FILENAME;if(!F) exit;if(!f) f="\n [N/A]";"file -b "F|getline T;if(T!~/^(AS.+ (En.+ )?text$|(Bo|PO).+ sh.+ text ex)/) F=F" ("T")";printf("\nContents of %s\n%s\n",F,f);if(l>L) printf("\n ...and %s more line(s)\n",l-L);} ' ' /^ +[NP].+ =/h;/^( +D.+[{]|[}])/{ g;s/.+= //p;};' 's/0/Off/p' ' END{print NR} ' ' /id: N|te: Y/{i++} END{print i} ' ' / / { print "'"${p[28]}"'";exit;};1;' '/ en/!s/\.//p' ' NR!=13{next};{sub(/[+-M]$/,"",$NF)};'"`S0 39 40`" ' $10~/$L/&&$9!~"localhost" { sub(/.+:/,"",$9);print $1": "$9;} ' '/^ +r/s/.+"(.+)".+/\1/p' 's/(.+\.wdgt)\/(Contents\/)?Info\.plist$/\1/p' 's/^.+\/(.+)\.wdgt$/\1/p' ' /l: /{ /DVD/d;s/.+: //;b0'$'\n'' };/s: /{ /V/d;s/^ */- /;H;};$b0'$'\n'' d;:0'$'\n'' x;/APPLE [^:]+$/d;p;' ' /^find: /d;p;' "`S0 44 45`" );c1=(system_profiler pmset\ -g nvram fdesetup find syslog df vm_stat sar ps sudo\ crontab sudo\ iotop top pkgutil 'PlistBuddy 2>&1 -c "Print' whoami cksum kextstat launchctl sudo\ launchctl crontab 'sudo defaults read' stat lsbom mdfind ' for i in ${p[24]};do ${c1[18]} ${c2[27]} $i;done;' defaults\ read scutil sudo\ dtrace sudo\ profiles sed\ -En awk /S*/*/P*/*/*/C*/*/airport networksetup mdutil sudo\ lsof test );c2=(com.apple.loginwindow\ LoginHook '" /L*/P*/loginw*' '" L*/P*/*loginit*' 'L*/Ca*/com.ap*.Saf*/E*/* -d 1 -name In*t -exec '"${c1[14]}"' :CFBundleDisplayName" {} \;|sort|uniq' '~ $TMPDIR.. \( -flags +sappnd,schg,uappnd,uchg -o ! -user $UID -o ! -perm -600 $' '.??* -path .Trash -prune -o -type d -name *.app -print -prune' :${p[35]}\" :Label\" '{/,}L*/{Con,Pref}* -type f ! -size 0 -name *.plist -exec plutil -s {} \;' "-f'%N: %l' Desktop L*/Keyc*" therm sysload boot-args status " -F '\$Time \$Message' -k Sender kernel -k Message Req 'bad |Beac|caug|dead[^bl]|FAIL|fail|GPU |hfs: Ru|inval|jnl:|last value [1-9]|n Cause: -|NVDA$|pagin|proc: t|Roamed|rror|ssert|Thrott|tim(ed? ?|ing )o|WARN' -k Message Rne 'Goog|ksadm|SMC:| VALI|xpma' -o -k Sender fseventsd -k Message Req 'SL' " '-du -n DEV -n EDEV 1 10' 'acrx -o comm,ruid,%cpu' '-t1 10 1' '-f -pfc /var/db/r*/com.apple.*.{BS,Bas,Es,J,OSXU,Rem,up}*.bom' '{/,}L*/Lo*/Diag* -type f -regex .\*[cgh] ! -name *ag \( -exec grep -lq "^Thread c" {} \; -exec printf \* \; -o -true $ -execdir stat -f:%Sc:%N -t%F {} \;|sort -t: -k2 |tail -n'${p[38]} '-L {/{S*/,},}L*/Lau* -type f' '-L /{S*/,}L*/StartupItems -type f -exec file {} +' '-L /S*/L*/{C*/Sec*A,E}* {/,}L*/{A*d,Ca*/*/Ex,Co{mpon,reM},Ex,Inter,iTu*/*P,Keyb,Mail/B,Pr*P,Qu*T,Scripti,Sec,Servi,Spo,Widg}* -path \\*s/Resources -prune -o -type f -name Info.plist' '/usr/lib -type f -name *.dylib' `awk "${s[31]}"<<<${p[23]}` "/e*/{auto,{cron,fs}tab,hosts,{[lp],sy}*.conf,pam.d/*,ssh{,d}_config,*.local} {,/usr/local}/etc/periodic/*/* /L*/P*{,/*}/com.a*.{Bo,sec*.ap}*t /S*/L*/Lau*/*t .launchd.conf" list getenv /Library/Preferences/com.apple.alf\ globalstate --proxy '-n get default' -I --dns -getdnsservers\ "${p[N5]}" -getinfo\ "${p[N5]}" -P -m\ / '' -n1 '-R -l1 -n1 -o prt -stats command,uid,prt' '--regexp --only-files --files com.apple.pkg.*|sort|uniq' -kl -l -s\ / '-R -l1 -n1 -o mem -stats command,uid,mem' '+c0 -i4TCP:0-1023' com.apple.dashboard\ layer-gadgets '-d /L*/Mana*/$USER&&echo On' '-app Safari WebKitDNSPrefetchingEnabled' "+c0 -l|awk '{print(\$1,\$3)}'|sort|uniq -c|sort -n|tail -1|awk '{print(\$2,\$3,\$1)}'" );N1=${#c2[@]};for j in {0..9};do c2[N1+j]=SP${p[j]}DataType;done;N2=${#c2[@]};for j in 0 1;do c2[N2+j]="-n ' syscall::'${p[33+j]}':return { @out[execname,uid]=sum(arg0) } tick-10sec { trunc(@out,1);exit(0);} '";done;l=(Restricted\ files Hidden\ apps 'Elapsed time (s)' POST Battery Safari\ extensions Bad\ plists 'High file counts' User Heat System\ load boot\ args FileVault Diagnostic\ reports Log 'Free space (MiB)' 'Swap (MiB)' Activity 'CPU per process' Login\ hook 'I/O per process' Mach\ ports kexts Daemons Agents launchd Startup\ items Admin\ access Root\ access Bundles dylibs Apps Font\ issues Inserted\ dylibs Firewall Proxies DNS TCP/IP Wi-Fi Profiles Root\ crontab User\ crontab 'Global login items' 'User login items' Spotlight Memory Listeners Widgets Parental\ Controls Prefetching SATA Descriptors );N3=${#l[@]};for i in 0 1 2;do l[N3+i]=${p[5+i]};done;N4=${#l[@]};for j in 0 1;do l[N4+j]="Current ${p[29+j]}stream data";done;A0() { id -G|grep -qw 80;v[1]=$?;((v[1]==0))&&sudo true;v[2]=$?;v[3]=`date +%s`;clear >&-;date '+Start time: %T %D%n';};for i in 0 1;do eval ' A'$((1+i))'() { v=` eval "${c1[$1]} ${c2[$2]}"|'${c1[30+i]}' "${s[$3]}" `;[[ "$v" ]];};A'$((3+i))'() { v=` while read i;do [[ "$i" ]]&&eval "${c1[$1]} ${c2[$2]}" \"$i\"|'${c1[30+i]}' "${s[$3]}";done<<<"${v[$4]}" `;[[ "$v" ]];};A'$((5+i))'() { v=` while read i;do '${c1[30+i]}' "${s[$1]}" "$i";done<<<"${v[$2]}" `;[[ "$v" ]];};';done;A7(){ v=$((`date +%s`-v[3]));};B2(){ v[$1]="$v";};for i in 0 1;do eval ' B'$i'() { v=;((v['$((i+1))']==0))||{ v=No;false;};};B'$((3+i))'() { v[$2]=`'${c1[30+i]}' "${s[$3]}"<<<"${v[$1]}"`;} ';done;B5(){ v[$1]="${v[$1]}"$'\n'"${v[$2]}";};B6() { v=` paste -d: <(printf "${v[$1]}") <(printf "${v[$2]}")|awk -F: ' {printf("'"${f[$3]}"'",$1,$2)} ' `;};B7(){ v=`grep -Fv "${v[$1]}"<<<"$v"`;};C0(){ [[ "$v" ]]&&echo "$v";};C1() { [[ "$v" ]]&&printf "${f[$1]}" "${l[$2]}" "$v";};C2() { v=`echo $v`;[[ "$v" != 0 ]]&&C1 0 $1;};C3() { v=`sed -E "$s"<<<"$v"`&&C1 1 $1;};for i in 1 2;do for j in 0 2 3;do eval D$i$j'(){ A'$i' $1 $2 $3; C'$j' $4;};';done;done;{ A0;D20 0 $((N1+1)) 2;D10 0 $N1 1;B0;C2 27;B0&&! B1&&C2 28;D12 15 37 25 8;A1 0 $((N1+2)) 3;C0;D13 0 $((N1+3)) 4 3;D23 0 $((N1+4)) 5 4;D13 0 $((N1+9)) 59 50;for i in 0 1 2;do D13 0 $((N1+5+i)) 6 $((N3+i));done;D13 1 10 7 9;D13 1 11 8 10;D22 2 12 9 11;D12 3 13 10 12;D23 4 19 44 13;D23 5 14 12 14;D22 6 36 13 15;D22 7 37 14 16;D23 8 15 38 17;D22 9 16 16 18;B1&&{ D22 35 49 61 51;D22 11 17 17 20;for i in 0 1;do D22 28 $((N2+i)) 45 $((N4+i));done;};D22 12 44 54 45;D22 12 39 15 21;A1 13 40 18;B2 4;B3 4 0 19;A3 14 6 32 0;B4 0 5 11;A1 17 41 20;B7 5;C3 22;B4 4 6 21;A3 14 7 32 6;B4 0 7 11;B3 4 0 22;A3 14 6 32 0;B4 0 8 11;B5 7 8;B1&&{ A2 19 26 23;B7 7;C3 23;};A2 18 26 23;B7 7;C3 24;A2 4 20 21;B7 6;B2 9;A4 14 7 52 9;B2 10;B6 9 10 4;C3 25;D13 4 21 24 26;B4 4 12 26;B3 4 13 27;A1 4 22 29;B7 12;B2 14;A4 14 6 52 14;B2 15;B6 14 15 4;B3 0 0 30;C3 29;A1 4 23 27;B7 13;C3 30;D13 24 24 32 31;D13 25 37 32 33;A2 23 18 28;B2 16;A2 16 25 33;B7 16;B3 0 0 34;B2 21;A6 47 21&&C0;B1&&{ D13 21 0 32 19;D13 10 42 32 40;D22 29 35 46 39;};D13 14 1 48 42;D12 34 43 53 44;D22 0 $((N1+8)) 51 32;D13 4 8 41 6;D12 26 28 35 34;D13 27 29 36 35;A2 27 32 39&&{ B2 19;A2 33 33 40;B2 20;B6 19 20 3;};C2 36;D23 33 34 42 37;B1&&D23 35 45 55 46;D23 32 31 43 38;D12 36 47 32 48;D13 20 42 32 41;D13 14 2 48 43;D13 4 5 32 1;D13 4 3 60 5;D12 26 48 49 49;B3 4 22 57;A1 26 46 56;B7 22;B3 0 0 58;C3 47;D22 4 4 50 0;D23 22 9 37 7;A7;C2 2;} 2>/dev/null|pbcopy;exit 2>&-
Copy the selected text to the Clipboard by pressing the key combination command-C.
8. Launch the built-in Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
Click anywhere in the Terminal window and paste by pressing command-V. The text you pasted should vanish immediately. If it doesn't, press the return key.
9. If you see an error message in the Terminal window such as "Syntax error" or "Event not found," enter
exec bash
and press return. Then paste the script again.
10. If you're logged in as an administrator, you'll be prompted for your login password. Nothing will be displayed when you type it. You will not see the usual dots in place of typed characters. Make sure caps lock is off. Type carefully and then press return. You may get a one-time warning to be careful. If you make three failed attempts to enter the password, the test will run anyway, but it will produce less information. In most cases, the difference is not important. If you don't know the password, or if you prefer not to enter it, press the key combination control-C or just press return three times at the password prompt. Again, the script will still run.
If you're not logged in as an administrator, you won't be prompted for a password. The test will still run. It just won't do anything that requires administrator privileges.
11. The test may take a few minutes to run, depending on how many files you have and the speed of the computer. A computer that's abnormally slow may take longer to run the test. While it's running, there will be nothing in the Terminal window and no indication of progress. Wait for the line
[Process completed]
to appear. If you don't see it within half an hour or so, the test probably won't complete in a reasonable time. In that case, close the Terminal window and report what happened. No harm will be done.
12. When the test is complete, quit Terminal. The results will have been copied to the Clipboard automatically. They are not shown in the Terminal window. Please don't copy anything from there. All you have to do is start a reply to this comment and then paste by pressing command-V again.
At the top of the results, there will be a line that begins with the words "Start time." If you don't see that, but instead see a mass of gibberish, you didn't wait for the "Process completed" message to appear in the Terminal window. Please wait for it and try again.
If any private information, such as your name or email address, appears in the results, anonymize it before posting. Usually that won't be necessary.
13. When you post the results, you might see an error message on the web page: "You have included content in your post that is not permitted," or "You are not authorized to post." That's a bug in the forum software. Please post the test results on Pastebin, then post a link here to the page you created.
14. This is a public forum, and others may give you advice based on the results of the test. They speak only for themselves, and I don't necessarily agree with them.
Copyright © 2014 by Linc Davis. As the sole author of this work, I reserve all rights to it except as provided in the Use Agreement for the Apple Support Communities website ("ASC"). Readers of ASC may copy it for their own personal use. Neither the whole nor any part may be redistributed.

My iPhone 5 won't stop scrolling through songs and I can't stop it please help !! :(

My iPhone 5 won't stop scrolling through songs and I can't stop it please help !! :(

settings - general - usuage - music - delete. Then do a reset, hold down the home/sleep button together until you see the apple logo and then release, then wait for the phone to boot back up.
Then sync the music back via iTunes.

Text won't stop deleting, delete key appears to get "stuck"

Sorry if this is in the wrong topic, I have never used the support forums for any of the multitude of problems I have had with my Mac, but this one is severe and odd enough that I couldn't even find anyone else discussing it (although I'm sure someone is, but I tried many search key combinations on Google and only found unrelated things), so I decided to at least get it documented.
I have had an issue that has happened at least 3 times I can remember (I am fairly certain it has happened more, closer to 7-8, those are just the times I am 100% confident about), although very spaced apart and infrequent, where my delete/backspace key seems to get "stuck". However, at least one time I can verify that I never even hit the key. Whatever text I currently have open immediately starts deleting at lightspeed, and I can do nothing to stop it. None of the other keys on my keyboard work, and though my mouse works, if I click somewhere else, it starts deleting the text there. When I force it to go to another window where there isn't an open text box, I get the general Mac error sound, and it repeats non-stop, and faster than I've ever heard it. I have to do a hard shut-down, although once it led to a kernal panic. When I have stopped whatever is happening before it panics though, when I restart, I don't receive any kind of error message, nor the message about OS X not having been shut down properly.
Every single time it has happened when I was typing something that couldn't be saved, like a message on a forum, a private message on a site or an IM chat window. Sometimes I lost a half hour's worth of work or more.
The first time it happened, I honestly thought someone had managed to hack into my computer, but another time I was using a physical modem and Airport was turned off, and when I ripped out the cord, it didn't stop.
I have a MacBook Pro from 2007, running the most recent version of Tiger. I haven't had the money to upgrade. All security updates are up-to-date, with one exception: I have not upgraded to the most recent version of iTunes.
Honestly, I currently am having and have been having a bunch of other severe issues with my Mac, so troubleshooting will be quite difficult as it's not at all impossible it's a result of one of my other problems. I also currently am dealing with some health problems that make me unable to try to find the root of the problem, specifically I have a problem with my hand and wrist that makes typing very difficult.
If someone does recognize this issue and already knows why it might be happening, I'd appreciate the help. I'd also appreciate anyone letting me know how I can prevent it OR what to do when it begins and how to stop it. But I probably will be unable to go through a typical troubleshooting rundown.
As I said, I just wanted this documented, and I also would like to know if anyone else has had this problem. I have never experienced an issue like this with any of my past computers, including Macs and PCs. I do know however that the key is NOT physically getting stuck - as in getting lodged down and continuing to be pressed. There is at least 1 time I can verify I never even hit the key (I wasn't typing anything at the time). I am fairly sure the problem is entirely unrelated to the actual delete key itself.
I'll describe the symptoms one more time:
At a random time, with no discernible warning, text contained in whatever text box I have open begins deleting itself. Several paragraphs disappear in a matter of seconds.
Pressing escape or any other key on the keyboard does nothing. If I click to another area in the text, it will immediately begin deleting wherever I have placed the cursor. If I go to another window with text that can be edited, it begins deleting there. It does not delete in more than one place simultaneously.
If I bring another window without any kind of "deletable" text to the front, one of the general Mac error sounds (I'm not sure which one it is) starts happening and repeats without stopping at a rate that could induce a seizure. To stop it all, the only thing I have found can be done is a hard shut-down. Another time it continued to end in a kernal panic. I wish I had the details of the error, but it was so long ago and I have no idea which panic is the right one in the logs.
I have no way of knowing what programs were running at the time, as obviously that's not something I'm able to pay attention to when it happens, and it has happened so randomly and infrequently it's nothing I've been able to document. Since I have to restart to make it stop, I've then lost that info and I have no time to try to write it down or something beforehand.
I have not had any similar issues that I know of (for instance, for the "g" key keeps repeating and won't stop typing "g's") and I've never experienced this on any past computer.
Thanks for anyone who can help!
If you aren't able to offer advice but have had this issue yourself, PLEASE let me know. I can't seem to find anyone who has experienced this particular problem.

"Cleaning the keyboard is the first step in troubleshooting sticky/stuck keys."
Okay, I guess I misunderstood, although I am still confused. You're saying that since the other user did an extensive clean of their keyboard and this did not solve the problem, it is "most likely" a hardware problem, correct? Wouldn't a thorough cleaning without any results show that it's probably not physically related to the keyboard?
"The "delete" key may be defective or the cover you are using somehow is making the key stick. If you have ruled out the latter and everything else, your only other alternative is to take the MBP to your local Apple Store or AASP. The staff will check out your keyboard (free) to confirm if you are having a hardware problem. If you have AppleCare or ProCare, the repairs will be free. If not.................."
Well, I had just said in my most recent post that it has now happened with other keys, and in my initial post that it happened at times when my hands were nowhere near the keyboard. It is not a defective delete key and the cover is not making the keys stick - it doesn't adhere to them and does not have any sticky substance on it of any kind. I am an experienced computer user, and I know my computer very well. While I am not a psychic that can always know what is causing a problem, I am able to discern with much accuracy what is NOT causing it.
Also, I have significant health issues so getting to an Apple store would be a huge challenge for me. And although I have AppleCare any repairs won't be free. Due to some small physical damage my laptop obtained a few years ago, I have been completely refused almost all service that I paid over $300 for, even though the damage is completely superficial. After fighting this, I was told they WOULD repair my computer, however, they would also repair the physical damage despite my insisting NOT to; I had no choice in the matter and the cost would be a minimum of $1,500 (I also would not be informed the exact price until after and my credit card would be charged without my knowledge - I had to give them my credit card number and sign away their right to make any charges and when I requested being contacted before they charged me for the repairs I didn't want done, I was told they did not do that). My family is struggling to pay for my $5 medications.
When my logic board died (that same issue that affected thousands of computer users), I had to print out Apple's report from their site, which stated that they would replace and repair them free of charge to ANY Mac owner with a computer that met certain qualifications (which mine did). When it happened, completely out of nowhere, I knew immediately that was the problem, yet still had to go through the insulting and idiotic "Is your computer plugged in?" list of things and a customer WITH AppleCare was being refused a service they'd offered to people WITHOUT AppleCare, for a known manufacturing defect that has occurred widely in nearly every brand of computer made.

Animated Gif won't stop looping!

I'll try to format my question as best I can.
I have created a Java chat applet, and for the Java chat, I have created a "ChatPane" class for displaying the chat. ChatPane is an extension of Canvas, and every time the paint() method is called, the program loops through visible lines of text drawing them on a buffer image, then draws the buffer on the screen.
My problem lies in animated gifs. In my chatroom, chatters can type textual symbols that will be replaced with an image (or emoticon). I have created my animated icons in a popular animated gif editing program, and I have set particular icons to loop 3 times. The problem is that when the animated icon is displayed in my applet, the animation -doesn't stop- after 3 loops, it loops forever! I can't for the life of me figure out why! Can anyone provide any insight as to why the animations won't stop after 3 loops? The animations work just fine if displayed in a browser by themselves (they stop looping after 3 times)
Thank you for any help!
[email protected]
Tony N.

From what I understand of your problem;
- You have made your own animated gifs
- With the software to make these gifs you have set them to loop their animations 3 times
- They loop continuously
I don't see how java can be expected to interpret the animated gif software instructions to loop only 3 times and would assume that there are various proprietry ways of setting this (an assumption based on applets /javascript etc, that rely on the client-side browser interpreter). So, if you loop your animated gif or have any form of animated gif that you import into your program with getDocumentBase /getCodeBase as a (pre-animated) gif, then this is exactly what I would assume would happen.
The answer is to seperate your images with eg;-
smiley1[0];
smiley1[1];
smiley1[2];
run a seperate thread, cycle through them as you wish and stop.
I'm fairly sure that there is nothing in either the swing libraries or the jmf libraries that can resolve this any other way, so your choices are write extra code and have a pool of threads to control this, or leave it as is.

LED won't stop flashing, even when there are no new notifications

The LED on my BlackBerry won't stop flashing, and I can't work out why. I have no new emails, messages, Facebook notifications, Twitter mentions, appointments/calendar events, and the LED didn't flash for new articles in the TIME magazine app any way. None of the other apps have anything to notify me of either.
I updated the OS some time ago, so I can't see that being the cause for the problem, which means I can not work out why the LED is still flashing, unless my BlackBerry is broken.
Has anybody else had this problem?
Running OS v4.6.1.310 (Platform 4.2.0.127)
Solved!
Go to Solution.

Hi danphynes,
Are you still experiencing this issue? If so, what color is the LED? Can you verify that the LED coverage indicator is disabled in Options -> Screen/Keyboard? Is the LED flashing red continually or does it stop for periods of time?
-FS
Come follow your BlackBerry Technical Team on Twitter! @BlackBerryHelp
Be sure to click Kudos! for those who have helped you.
Click Solution? for posts that have solved your issue(s)!

Is there a way to get an iPod touch to play one audio track and stop.

Is there a way to get an iPad to play one audio track and stop.
I work in education and particularly music. Teachers are looking to create a playlist of selected track but only want the selected track to play then stop.
This allows them to talk to the class during presentation and not worry about having to stop playback mid discussion.
I've been successful doing this from appleTVs homeshared to a library by unchecking songs in the playlist. But It would be useful to instructors who have there own media on their device.

Thanks for a cognative answer TXMark.
For what its worth to any readers that work in education and would like this play once and stop 'feature'
I had great success in homeshareing a iTunes library of teaching material and creating topic specific playlist and used apple remote app to control an appletv connected to that homeshared library. As TXMark suggests, uncheck the songs in iTunes and the media will not automatically play the tracks in sequence.
note: if you have video media that you would like to have in the playlist, be sure its listed as a music video in the options of get info of track. otherwise the apple tv will not see the media in the playlist and will put it in the movies section of the library.

Is there a way to get an iPad to play one audio track and stop.

Is there a way to get an iPad to play one audio track and stop.
I work in education and particularly music. Teachers are looking to create a playlist of selected track but only want the selected track to play then stop.
This allows them to talk to the class during presentation and not worry about having to stop playback mid discussion.
I've been successful doing this from appleTVs homeshared to a library by unchecking songs in the playlist. But It would be useful to instructors who have there own media on their device.

The only way to stop after a song is to create a playlist consisting of only that song.
For feature suggestions use http://www.apple.com/feedback/ipad.html

Audio won't stop!

Similar Messages

Maybe you are looking for