Audio wont play in preview

Hi
I have dropped and dragged a 'aiff' audio file into the preview drop zone audio box, but the audio just wont play during the DVD preview.
Any ideas?

Hi Mantas65
Welcome to apple discussions. Assuming the stop motion button within preview is not currently activated, are both sliders for audio at least half way? There's a slider for the preview that controls audio level and also one within the audio well for the aiff you are planning to use. Let's take an example (as in the photo below of preview within iDvd):
click here:
At the foot of the above image, move the slider to the right so you can listen to the current audio for Revolution Main for example. Now drag and drop the desired audio file you wish to replace it with. In the example below I've chosen "Bittersweet Symphony" but you also must make sure the slider in this audio well is not set to its lowest level which iDvd at times will default to. So simply drag the slider to the right half way or higher.
click here:
If you have already done both the above steps and you still have no audio, then it's very possible the audio file is corrupted. Try a different audio file to make sure.
Hope this helps but if not just come on back.
Message was edited by: SDMacuser

Similar Messages

Audio wont play when pc is hooked to tv

ive followed the instructions on how to hook my pc to my tv to stream video and sound and the vidio is vissible but the audio wont play. vollume is up and the imput out put is corectly in place. why cant i hear audio?

Hi precious5959,
Welcome to the HP Support Forums!
I am happy to help you with your audio problem, but it would be helpful to have the product number and OS version. Please read the following documents if you need help in finding that.
How Do I Find My Model Number or Product Number?
Is the Windows Version on My Computer 32-bit or 64-bit?
What sort of connection are you using between your computer and tv? For some connection types, audio is not included and requires an additional audio cable.
Some general information that may be helpful for you:
Connecting a Monitor, Projector or TV (Windows 8)
Overview of HDMI and DVI Connections for PCs
In the following link, please pay particular attention to the section on Troubleshooting TV setup as a second monitor.
Using Two or More Monitors with One Computer (Windows 8)
Other things that could help would be to insure that you have updated all the video and audio related drivers for your notebook. The drivers can normally be found from the product page for your notebook, or from the original chipset manufacturer. I would link that page to this, but I need the exact product/model number to get the right page for you.
Another thing that could help with drivers is the: HP Support Assistant as it can automate the driver updates for you.
Also here are some links to videos on youtube that could be helpful to you. They cover a range of audio related issues, and could be very informative.
Fixing Your PC's Sound - Part 1: Selecting the Right Speakers
Fixing Your PC's Sound - Part 2: Checking Volume Controls and Connections
Fixing Your PC's Sound - Part 3: Quick Fixes in Windows Vista
Fixing Your PC's Sound - Part 4: Setting up Digital Sound
Fixing Your PC's Sound - Part 5: Finding and Installing Audio Drivers
Fixing Your PC's Sound - Part 6: Updating Codecs
Please let me know if this has been helpful. or if you need any additional assistance.
Regards
Malygris1
I work on behalf of HP
Please click Accept as Solution if you feel my post solved your issue, it will help others find the solution.
Click Kudos Thumbs Up on the right to say “Thanks” for helping!

Captivate 6 Audio not playing in preview

I have been inserting audio recordings into my Captivate 6 project slides with no problem. I inserted them, clicked play, and they worked. This morning, however, I found none of my audio would play when I click Play at the bottom of my Timeline. It will play from the slide audio window when I double click the audio. It will play when I click the Preview button under the Insert Menu. So why will it not play from the play bar under the timeline? Any Ideas?
Thanks,
Darin

Hi there
When this happens to you next time, perhaps it would be helpful to double check a place you may have clicked and not realized it. Sure, clobbering the preferences nailed it, but that's a bit like using a bazooka to kill the fly in the room.
Too late now, but my guess is that this is what happened.
If you look at the Timeline area you should see a small speaker icon as shown below:
It's easy to click this and there isn't much of an indication you have muted the slide. My guess is that you managed to click this earlier. Too bad you had to clobber preferences to get it back.
Cheers... Rick

Captive 6 audio not playing in preview

I am having an issue with audio playing on some of the slides in preview mode, other slides the audio works fine. On the problem slides, I am able to play the audio on the slide or timeline but in preview mode it will not play.

Which Preview mode? If it's the "Play this slide" preview, perhaps you have managed to mute the audio?
Look at the image below for reference.
Cheers... Rick

Audio not playing in Preview

I have a slide that audio was recorded within Captivate. When I play the slide the audio does play, but when I preview/publish, the audio is not there. I have three caption boxes that fade in during the slide presentation. Not sure if this could be affecting it. Any ideas out there?

Check under Preferences > Project > Publish Settings to see if the box for Include Audio is checked.

Captivate 3 Text/Audio NOT playing when previewed

I am able to see text boxes and hear the audio by playing the slide in edit mode but when I go to preview - no matter how - they do not present themselves. The timing of the slide is still the same length as if they did play (i.e. 60 seconds of text/audio in edit mode...60 seconds of silence and blankness in preview mode).
Thank you for your wisdom
JC

How did you preview? Have you tried to publish and do you the same issue then?
Lilybiri

Audio wont play after importing from camcorder

I import video fine via the camcorder, the audio plays fine while importing but when I went to edit it, the audio track stops playing after about a mintue or two.
It shows up in the timeline, I have it checked to play, but for some reason it does not play, any ideas why this happens? I extracted a small clip of audio, and it still wont play. Any help is appreciated!

I'll double check at home the cam is there, I was messing with the settings at one point, new cam but don't think I changed any audio settings, just put it to stereo....

Audio wont play on main menu

Help, I can't get audio to play in the main menu of my IDVD. But it works fine in the submenu. Any ideas?

Hi
a. Audio won't play - most common problem is that audio used comes via iTune and DRM-protection silence it.
In iTune collect needed audio into a new PlayList and burn this out as an Audio-CD .aiff (not .mp3). Use the files from this CD in Your projects.
b. Where does it not play ?
• On the burned DVD in any DVD-Player
• On the DiskImage in Your Mac via DVD-player tool
• In the iDVD application
c. Can it be so that You use .mp3 or other audio file format else than .aiff 44.1kHz 16-bit (or 48kHz 16-bit) ?
Yours Bengt W

A30 audio wont play after XP pro install

My A30 crashed a few days ago, and I have done a complete format and re-install of XP pro. A number of features did not subsequently work, such as power management, touch pad, and audio. Touch pad and power management have been fixed with the relevant drivers, however, I cannot get any audio to play. Its almost as if the sound card is not being recognised, though the drivers are installed. Am at a complete loss so all help gratefully received

Hello,
at http://eu.computers.toshiba-europe.com in the driver download section you will fin the current Realtek sound driver for the A30 series! Try to install it!
Otherwise you should install the sound driver from the tools & Utilities CD!
Bye Tok

Menu audio will play during preview but not when disc is burned.

Encore CS6.
Menu music plays fine in preview. I know that the file is good. No menu audio after disc is burned. Have tried several different transcoding options. There is menu video too that is working fine.

Here are notes I couldn't find before I posted that; just general re testing methods:
Mounting an iso (or building to a folder) is a great way to test. There are some differences, but it is a great method prior to burning to a disk. The main difference is simply computer vs dvd player - autoactivate on a button doesn't work with a mouseover, and you can be fooled into thinking your navigation does, or does not, work. (Even on the computer, don't use the mouse for testing, use the "remote" in the player controls.)
Encore preview is an emulator, like computer DVD players, that attempts to predict what will happen when a disk is played on a set top DVD player. It has always had issues with some predictions not being accurate. Some inaccuracies are like this one: Encore preview does not work, and a burned disk will. Others are the opposite; it works in Encore preview, and not in a DVD player. The point to be made here is that you cannot rely on Encore preview. You also cannot rely on computer playback of a built image or folder. And, in the end, you cannot rely on playback on one DVD player - some disks work on some players and not on others.

Audio Wont Play Through Output When Usb Input is Connected

I have the "MXL Mic Mate" usb mic interface. It works perfectly in GarageBand, once I choose the Output to the Built-in output in preferences.
However in Logic, when the device is recognized, It can record (pick up the input audio) but the no sound can be heard coming from the output.
I tried going under the computers preferences and setting the default audio output but no luck.
Advice on how to fix this would be greatly appreciated.
thank you.

You might need to check the settings in teamspeak.
What happens if you dont use team speak overlay? does the sound play normally from your headphones?
I'm an HP Employee.
The opinions expressed here are my personal opinions, not of HP.
Click on Thumbs up if my post helped you.
Make it easier for other people to find solutions, by marking an answer “Accept as Solution” if it solves your problem.

Audio wont play on anything but quicktime or itunes

Does anyone know why I can't hear any audio on windows media player, real player or even flash based website? I can only hear audio from itunes or quicktime.

Hi
a. Audio won't play - most common problem is that audio used comes via iTune and DRM-protection silence it.
In iTune collect needed audio into a new PlayList and burn this out as an Audio-CD .aiff (not .mp3). Use the files from this CD in Your projects.
b. Where does it not play ?
• On the burned DVD in any DVD-Player
• On the DiskImage in Your Mac via DVD-player tool
• In the iDVD application
c. Can it be so that You use .mp3 or other audio file format else than .aiff 44.1kHz 16-bit (or 48kHz 16-bit) ?
Yours Bengt W

Encore wont play video files

I recently upgraded encore from ver.2 to cs3 and find that ver.cs3 wont play video files.
It wont play the file in the project window, it just stops at the first frame. If I move the slider below the viewer the video material is updated but it wont play.
In the monitor view it wont play either, I can view the material by manually moving the cursor.
It wont play a preview either, it just stops.
It builds a DVD without problems and the dvd plays fine without errors but the program wont play any video files.
Ver.2 plays all the same video files without problems.
Please help!

Whew!
Glad that you got it fixed, and thanks for posting what worked for you.
Good luck with the interview,
Hunt
PS - BTW, welcome to the forum!

When sending video from my iphone to apple tv it says on screen it is doing it but it wont play on tv but audio works great

when sending video from my iphone to apple tv it says on screen it is doing it but it wont play on tv but audio works great

Welcome to the Apple Community.
Websites and third party Apps need enabling before they will allow AirPlay of Video content. Some Website/App developers have not enabled their products, some simply haven't got around to it yet, others have stated that they won't be enabling AirPlay (likely as a result of licensing issues).
I have created a User Tip to list Apps that have been tested with Video Airplay, if you have any Apps that you have tested please email me details and I'll add them to the User Tip.

TS1362 my iTunes wont play music or videos when i open it it comes up with "iTunes has detected a problem with your audio with your configuration AudioVideo playback may not operate properly"

my iTunes wont play music or videos when i open it it comes up with "iTunes has detected a problem with your audio with your configuration AudioVideo playback may not operate properly" i have uninstalled it and reinstalled it twice and it stil lcomes up with that message every time I opentheiTunes icon I dont knowwhat to do

Hello Wade,
This is typically indicative of an issue with the installation of QuickTime on your computer. The following article provides steps for reinstalling QuickTime to resolve the issue.
"iTunes cannot run because it has detected a problem with your audio configuration"
Resolution
QuickTime may need to be reinstalled. Follow the steps below to uninstall QuickTime and then download and install QuickTime using the QuickTime standalone Installer.
On the Start menu, click Control Panel.
Follow the steps appropriate for your Windows operating system below.
Windows XP and Windows 2000: Open the Add or Remove Programs control panel and selectQuickTime in the list of currently installed programs.
Windows Vista and Windows 7: Click Uninstall a program (or if using Windows Vista's Classic View of the Control Panel, click Programs and Features) and select QuickTime in the list of currently installed programs.
Click the Remove button (or Uninstall for Windows Vista and Windows 7) and follow the prompts to remove QuickTime from your computer.
Download QuickTime. Note: There are two options for downloading QuickTime, be sure to select the option that does not include iTunes.
During the download:
If you choose to run the installer, proceed to the next step.
If you choose to save the download, double click the QuickTimeInstaller file, then proceed to next step.
Follow the on-screen instructions to install QuickTime.
Reopen iTunes.
iTunes for Windows: iTunes cannot run because it detects an issue with QuickTime
http://support.apple.com/kb/TS1371
Cheers,
Allen

Audio wont play in preview

Similar Messages

Maybe you are looking for