Audio Working but No Visual
I have multiple movies on my mac all saved as .avi and when i open them to watch in quicktime the audio works perfectly but I get no picture, just a black screen. Help me!
Welcome to the forums!
Download and install Perian from http://perian.org/
You should read this support page http://perian.org/#support in case you need to delete older codecs. In Macintosh HD/Library/Quicktime/ delete any files relating to DivX (Perian already has them). However it should be noted that Perian is not an internet plugin and will not play DivX files imbedded on a website. For that you will need the DivX Player browser plugin available from http://www.divx.com/divx/mac/
Similar Messages
-
PC is showing realtk high definition audio working but not showing not plugged in
computer is a hp pavillion a6763w desktop PC.
i had installed a ati video card and all worked perfectly for a while after updating the drivers for it my onboard sound went out. the sound would play through the hdmi output but no other output. i uninstalled video card and drivers and reverted back to old drivers. did a restore point. reset the bios to enable onboard sound. reinstalled drivers for onboard sound. tried installing a sound card and it was not recognized by the computer. but still PC is showing realtk high definition audio working but nothing plugged in when it is. also i have tries several different devices being plugged in and none of them worked.Hi,
When installing a discreet sound card, you should disable on board audio.
With HDMI, you have to chose speakers or HDMI but not both. It's one or the other.
What ATI video card are you using and did you upgrade your power supply?
Did you go to www.realtek.com and download the latest audio drivers when using the on board audio?
HP DV9700, t9300, Nvidia 8600, 4GB, Crucial C300 128GB SSD
HP Photosmart Premium C309G, HP Photosmart 6520
HP Touchpad, HP Chromebook 11
Custom i7-4770k,Z-87, 8GB, Vertex 3 SSD, Samsung EVO SSD, Corsair HX650,GTX 760
Custom i7-4790k,Z-97, 16GB, Vertex 3 SSD, Plextor M.2 SSD, Samsung EVO SSD, Corsair HX650, GTX 660TI
Windows 7/8 UEFI/Legacy mode, MBR/GPT -
Audio works but video is solid green
The audio works but all videos are solid green
Green screens are nearly ALWAYS an indicator of outdated or corrupted video drivers. See: http://forums.adobe.com/thread/945765
-
My audio works but not the video
My audio will work but when I want to watch any video on any different app the video doesn't work.why?
Try:
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Reset all settings
Go to Settings > General > Reset and tap Reset All Settings.
All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
- Restore from backup. See:
iOS: How to back up
- Restore to factory settings/new iOS device.
If still problem, make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
Apple Retail Store - Genius Bar -
IChat Screen Sharing: Audio works but video is a white screen.
I am having a problem using iChat screen sharing with a specific computer. We are both running OS 10.7.4. I have a Mac Book Pro (fall 2011) and he has a iMac one to two years old. We have tried contacting apple support but no luck yet. We tried setting up a test user to see if the problem was user specific but encountered the same problem. Again, video and text chat work fine. He can share my screen with no issues. Only when I ask to share his screen do I get a blank white screen. Audio works and I can manipulate his curser but all I have is a white screen. I have tried changing the resolution on his iMac but this has not helped. Also we are both using Google Talk as the chat server.
Hi,
Historically iChat Updates came in OS updates.
Not every OS update had an iChat update but that was the way they were delivered.
Only twice during the lifetime of iChat 3 have there ever been standalone Updates outside of this.
Most Updates are now through the App Store but Software Update can still be used (I have mine set on Daily despite Apple's Updates normally coming on Tuesdays)
One person stated he thought there had been a change with OS 10.8.1 saying the Build number of Messages had changed.
In my experience it has not and when Apple do update something the build Number and Version number change.
It is widely know that Apple send Developers and others advance copies of the OS to try out.
Those people sign NDAs (Non Disclosure Agreements) so you will not see any discussion of any up and coming stuff on this site.
8:55 PM Thursday; September 6, 2012
Please, if posting Logs, do not post any Log info after the line "Binary Images for iChat"
iMac 2.5Ghz 5i 2011 (Lion 10.7.2)
G4/1GhzDual MDD (Leopard 10.5.8)
MacBookPro 2Gb (Snow Leopard 10.6.8)
Mac OS X (10.6.8),
"Limit the Logs to the Bits above Binary Images." No, Seriously -
I have audio working, but not the microphone on my toshiba satellite
Hi there, I'm a newbie to the arch way, but I'm not a newbie to linux, however I'm pretty stumped with this one (I'm not used to having to look after everything, but I'm loving it!) I have a Toshiba Satellite C650D-10W, and it has a very annoying soundcard built into it. I have the sound working, thankfully, however I cannot get the inbuilt mic to function. Some info here:
lspci:
00:00.0 Host bridge: Advanced Micro Devices [AMD] RS780 Host Bridge Alternate
00:01.0 PCI bridge: Advanced Micro Devices [AMD] RS780 PCI to PCI bridge (int gfx)
00:04.0 PCI bridge: Advanced Micro Devices [AMD] RS780 PCI to PCI bridge (PCIE port 0)
00:05.0 PCI bridge: Advanced Micro Devices [AMD] RS780 PCI to PCI bridge (PCIE port 1)
00:11.0 SATA controller: ATI Technologies Inc SB700/SB800 SATA Controller [AHCI mode]
00:12.0 USB Controller: ATI Technologies Inc SB700/SB800 USB OHCI0 Controller
00:12.2 USB Controller: ATI Technologies Inc SB700/SB800 USB EHCI Controller
00:13.0 USB Controller: ATI Technologies Inc SB700/SB800 USB OHCI0 Controller
00:13.2 USB Controller: ATI Technologies Inc SB700/SB800 USB EHCI Controller
00:14.0 SMBus: ATI Technologies Inc SBx00 SMBus Controller (rev 41)
00:14.2 Audio device: ATI Technologies Inc SBx00 Azalia (Intel HDA) (rev 40)
00:14.3 ISA bridge: ATI Technologies Inc SB700/SB800 LPC host controller (rev 40)
00:14.4 PCI bridge: ATI Technologies Inc SBx00 PCI to PCI Bridge (rev 40)
00:16.0 USB Controller: ATI Technologies Inc SB700/SB800 USB OHCI0 Controller
00:16.2 USB Controller: ATI Technologies Inc SB700/SB800 USB EHCI Controller
00:18.0 Host bridge: Advanced Micro Devices [AMD] K10 [Opteron, Athlon64, Sempron] HyperTransport Configuration
00:18.1 Host bridge: Advanced Micro Devices [AMD] K10 [Opteron, Athlon64, Sempron] Address Map
00:18.2 Host bridge: Advanced Micro Devices [AMD] K10 [Opteron, Athlon64, Sempron] DRAM Controller
00:18.3 Host bridge: Advanced Micro Devices [AMD] K10 [Opteron, Athlon64, Sempron] Miscellaneous Control
00:18.4 Host bridge: Advanced Micro Devices [AMD] K10 [Opteron, Athlon64, Sempron] Link Control
01:05.0 VGA compatible controller: ATI Technologies Inc M880G [Mobility Radeon HD 4200]
02:00.0 Network controller: Atheros Communications Inc. AR9285 Wireless Network Adapter (PCI-Express) (rev 01)
08:00.0 Ethernet controller: Atheros Communications AR8152 v1.1 Fast Ethernet (rev c1)
Dmesg:
Initializing cgroup subsys cpuset
Initializing cgroup subsys cpu
Linux version 2.6.35-ARCH (tobias@T-POWA-LX) (gcc version 4.5.1 (GCC) ) #1 SMP PREEMPT Sat Oct 30 19:57:05 UTC 2010
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 000000002e54a000 (usable)
BIOS-e820: 000000002e54a000 - 000000002e74a000 (ACPI NVS)
BIOS-e820: 000000002e74a000 - 000000002fd3f000 (usable)
BIOS-e820: 000000002fd3f000 - 000000002fdbf000 (reserved)
BIOS-e820: 000000002fdbf000 - 000000002febf000 (ACPI NVS)
BIOS-e820: 000000002febf000 - 000000002fef7000 (ACPI data)
BIOS-e820: 000000002fef7000 - 000000002ff00000 (usable)
BIOS-e820: 00000000f8000000 - 00000000f9000000 (reserved)
BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
BIOS-e820: 00000000fec10000 - 00000000fec11000 (reserved)
BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
BIOS-e820: 00000000ffe00000 - 0000000100000000 (reserved)
Notice: NX (Execute Disable) protection cannot be enabled: non-PAE kernel!
DMI 2.6 present.
e820 update range: 0000000000000000 - 0000000000001000 (usable) ==> (reserved)
e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
last_pfn = 0x2ff00 max_arch_pfn = 0x100000
MTRR default type: uncachable
MTRR fixed ranges enabled:
00000-9FFFF write-back
A0000-BFFFF uncachable
C0000-FFFFF write-through
MTRR variable ranges enabled:
0 base 000000000000 mask FFFFE0000000 write-back
1 base 000020000000 mask FFFFF0000000 write-back
2 base 00002FEBE000 mask FFFFFFFFF000 uncachable
3 base 0000FFE00000 mask FFFFFFE00000 write-protect
4 disabled
5 disabled
6 disabled
7 disabled
x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
e820 update range: 0000000000002000 - 0000000000010000 (usable) ==> (reserved)
Scanning 1 areas for low memory corruption
modified physical RAM map:
modified: 0000000000000000 - 0000000000001000 (reserved)
modified: 0000000000001000 - 0000000000002000 (usable)
modified: 0000000000002000 - 0000000000010000 (reserved)
modified: 0000000000010000 - 000000000009fc00 (usable)
modified: 000000000009fc00 - 00000000000a0000 (reserved)
modified: 00000000000e0000 - 0000000000100000 (reserved)
modified: 0000000000100000 - 000000002e54a000 (usable)
modified: 000000002e54a000 - 000000002e74a000 (ACPI NVS)
modified: 000000002e74a000 - 000000002fd3f000 (usable)
modified: 000000002fd3f000 - 000000002fdbf000 (reserved)
modified: 000000002fdbf000 - 000000002febf000 (ACPI NVS)
modified: 000000002febf000 - 000000002fef7000 (ACPI data)
modified: 000000002fef7000 - 000000002ff00000 (usable)
modified: 00000000f8000000 - 00000000f9000000 (reserved)
modified: 00000000fec00000 - 00000000fec01000 (reserved)
modified: 00000000fec10000 - 00000000fec11000 (reserved)
modified: 00000000fee00000 - 00000000fee01000 (reserved)
modified: 00000000ffe00000 - 0000000100000000 (reserved)
initial memory mapped : 0 - 01800000
init_memory_mapping: 0000000000000000-000000002ff00000
0000000000 - 0000400000 page 4k
0000400000 - 002fc00000 page 2M
002fc00000 - 002ff00000 page 4k
kernel direct mapping tables up to 2ff00000 @ 15000-1a000
RAMDISK: 2e3b5000 - 2e53a000
ACPI: RSDP 000fe020 00024 (v02 TOSINV)
ACPI: XSDT 2fef6120 0005C (v01 TOSINV TOSINV00 00000003 01000013)
ACPI: FACP 2fef5000 000F4 (v04 TOSINV TOSINV00 00000003 MSFT 01000013)
ACPI: DSDT 2fee6000 0BAEB (v01 TOSINV TOSINV00 F0000000 MSFT 01000013)
ACPI: FACS 2fe9c000 00040
ACPI: HPET 2fef4000 00038 (v01 TOSINV TOSINV00 00000001 MSFT 01000013)
ACPI: APIC 2fef3000 00084 (v02 TOSINV TOSINV00 00000001 MSFT 01000013)
ACPI: MCFG 2fef2000 0003C (v01 TOSINV TOSINV00 00000001 MSFT 01000013)
ACPI: BOOT 2fee5000 00028 (v01 TOSINV TOSINV00 00000001 MSFT 01000013)
ACPI: SLIC 2fee4000 00176 (v01 TOSINV TOSINV00 00000001 MSFT 01000013)
ACPI: SSDT 2fee3000 001BD (v01 AMD POWERNOW 00000001 AMD 00000001)
ACPI: Local APIC address 0xfee00000
0MB HIGHMEM available.
767MB LOWMEM available.
mapped low ram: 0 - 2ff00000
low ram: 0 - 2ff00000
Zone PFN ranges:
DMA 0x00000001 -> 0x00001000
Normal 0x00001000 -> 0x0002ff00
HighMem empty
Movable zone start PFN for each node
early_node_map[5] active PFN ranges
0: 0x00000001 -> 0x00000002
0: 0x00000010 -> 0x0000009f
0: 0x00000100 -> 0x0002e54a
0: 0x0002e74a -> 0x0002fd3f
0: 0x0002fef7 -> 0x0002ff00
On node 0 totalpages: 195288
free_area_init_node: node 0, pgdat c1418ac0, node_mem_map c157d020
DMA zone: 32 pages used for memmap
DMA zone: 0 pages reserved
DMA zone: 3952 pages, LIFO batch:0
Normal zone: 1502 pages used for memmap
Normal zone: 189802 pages, LIFO batch:31
Using APIC driver default
ACPI: PM-Timer IO Port: 0x408
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] disabled)
ACPI: LAPIC (acpi_id[0x02] lapic_id[0x00] disabled)
ACPI: LAPIC (acpi_id[0x03] lapic_id[0x00] disabled)
ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
ACPI: IOAPIC (id[0x04] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 4, version 33, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ9 used by override.
Using ACPI (MADT) for SMP configuration information
ACPI: HPET id: 0x1002a201 base: 0xfed00000
SMP: Allowing 4 CPUs, 3 hotplug CPUs
nr_irqs_gsi: 40
early_res array is doubled to 64 at [16000 - 167ff]
PM: Registered nosave memory: 0000000000002000 - 0000000000010000
PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000
PM: Registered nosave memory: 00000000000e0000 - 0000000000100000
PM: Registered nosave memory: 000000002e54a000 - 000000002e74a000
PM: Registered nosave memory: 000000002fd3f000 - 000000002fdbf000
PM: Registered nosave memory: 000000002fdbf000 - 000000002febf000
PM: Registered nosave memory: 000000002febf000 - 000000002fef7000
Allocating PCI resources starting at 2ff00000 (gap: 2ff00000:c8100000)
Booting paravirtualized kernel on bare hardware
setup_percpu: NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:4 nr_node_ids:1
PERCPU: Embedded 14 pages/cpu @c1c00000 s34880 r0 d22464 u1048576
pcpu-alloc: s34880 r0 d22464 u1048576 alloc=1*4194304
pcpu-alloc: [0] 0 1 2 3
Built 1 zonelists in Zone order, mobility grouping on. Total pages: 193754
Kernel command line: root=/dev/disk/by-uuid/df51f9a3-a50d-4006-a220-7f2121cc9926 ro
PID hash table entries: 4096 (order: 2, 16384 bytes)
Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Initializing CPU#0
allocated 3927020 bytes of page_cgroup
please try 'cgroup_disable=memory' option if you don't want memory cgroups
Subtract (53 early reservations)
#1 [0000001000 - 0000002000] EX TRAMPOLINE
#2 [0001000000 - 0001574184] TEXT DATA BSS
#3 [002e3b5000 - 002e53a000] RAMDISK
#4 [000009fc00 - 0000100000] BIOS reserved
#5 [0001575000 - 000157b1bf] BRK
#6 [0000010000 - 0000011000] TRAMPOLINE
#7 [0000011000 - 0000015000] ACPI WAKEUP
#8 [0000015000 - 0000016000] PGTABLE
#9 [000157c000 - 000157d000] BOOTMEM
#10 [000157d000 - 0001b7d000] BOOTMEM
#11 [00015741c0 - 00015741c4] BOOTMEM
#12 [0001574200 - 00015742c0] BOOTMEM
#13 [00015742c0 - 0001574308] BOOTMEM
#14 [0001b7d000 - 0001b80000] BOOTMEM
#15 [0001574340 - 0001574365] BOOTMEM
#16 [0001574380 - 00015743a7] BOOTMEM
#17 [00015743c0 - 00015745b8] BOOTMEM
#18 [00015745c0 - 0001574600] BOOTMEM
#19 [0001574600 - 0001574640] BOOTMEM
#20 [0001574640 - 0001574680] BOOTMEM
#21 [0001574680 - 00015746c0] BOOTMEM
#22 [00015746c0 - 0001574700] BOOTMEM
#23 [0001574700 - 0001574740] BOOTMEM
#24 [0001574740 - 0001574780] BOOTMEM
#25 [0001574780 - 00015747c0] BOOTMEM
#26 [00015747c0 - 0001574800] BOOTMEM
#27 [0001574800 - 0001574840] BOOTMEM
#28 [0001574840 - 0001574880] BOOTMEM
#29 [0001574880 - 00015748c0] BOOTMEM
#30 [00015748c0 - 0001574900] BOOTMEM
#31 [0001574900 - 0001574940] BOOTMEM
#32 [0001574940 - 0001574980] BOOTMEM
#33 [0001574980 - 0001574990] BOOTMEM
#34 [00015749c0 - 00015749d0] BOOTMEM
#35 [0001574a00 - 0001574a10] BOOTMEM
#36 [0001574a40 - 0001574a50] BOOTMEM
#37 [0001574a80 - 0001574abf] BOOTMEM
#38 [0001574ac0 - 0001574aff] BOOTMEM
#39 [0001c00000 - 0001c0e000] BOOTMEM
#40 [0001d00000 - 0001d0e000] BOOTMEM
#41 [0001e00000 - 0001e0e000] BOOTMEM
#42 [0001f00000 - 0001f0e000] BOOTMEM
#43 [0001574b00 - 0001574b04] BOOTMEM
#44 [0001574b40 - 0001574b44] BOOTMEM
#45 [0001574b80 - 0001574b90] BOOTMEM
#46 [0001574bc0 - 0001574bd0] BOOTMEM
#47 [0001574c00 - 0001574ca0] BOOTMEM
#48 [0001574cc0 - 0001574d08] BOOTMEM
#49 [0001b80000 - 0001b84000] BOOTMEM
#50 [0001c0e000 - 0001c8e000] BOOTMEM
#51 [0001b84000 - 0001bc4000] BOOTMEM
#52 [0001f0e000 - 00022ccbec] BOOTMEM
Initializing HighMem for node 0 (00000000:00000000)
Memory: 762948k/785408k available (2987k kernel code, 18204k reserved, 1237k data, 416k init, 0k highmem)
virtual kernel memory layout:
fixmap : 0xfff16000 - 0xfffff000 ( 932 kB)
pkmap : 0xff800000 - 0xffc00000 (4096 kB)
vmalloc : 0xf0700000 - 0xff7fe000 ( 240 MB)
lowmem : 0xc0000000 - 0xeff00000 ( 767 MB)
.init : 0xc1421000 - 0xc1489000 ( 416 kB)
.data : 0xc12eac4c - 0xc1420200 (1237 kB)
.text : 0xc1000000 - 0xc12eac4c (2987 kB)
Checking if this processor honours the WP bit even in supervisor mode...Ok.
SLUB: Genslabs=13, HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
Hierarchical RCU implementation.
RCU-based detection of stalled CPUs is disabled.
Verbose stalled-CPUs detection is disabled.
NR_IRQS:512
Console: colour VGA+ 80x25
console [tty0] enabled
hpet clockevent registered
Fast TSC calibration using PIT
Detected 2194.695 MHz processor.
Calibrating delay loop (skipped), value calculated using timer frequency.. 4391.28 BogoMIPS (lpj=7315650)
pid_max: default: 32768 minimum: 301
Security Framework initialized
Mount-cache hash table entries: 512
Initializing cgroup subsys ns
Initializing cgroup subsys cpuacct
Initializing cgroup subsys memory
Initializing cgroup subsys devices
Initializing cgroup subsys freezer
Initializing cgroup subsys net_cls
Initializing cgroup subsys blkio
mce: CPU supports 6 MCE banks
using C1E aware idle routine
Performance Events: AMD PMU driver.
... version: 0
... bit width: 48
... generic registers: 4
... value mask: 0000ffffffffffff
... max period: 00007fffffffffff
... fixed-purpose events: 0
... event mask: 000000000000000f
SMP alternatives: switching to UP code
ACPI: Core revision 20100428
TOSHIBA Satellite detected - force copy of DSDT to local memory
ACPI: Forced DSDT copy: length 0x0BAEB copied locally, original unmapped
Enabling APIC mode: Flat. Using 1 I/O APICs
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
CPU0: AMD V120 Processor stepping 03
System has AMD C1E enabled
Switch to broadcast mode on CPU0
Brought up 1 CPUs
Total of 1 processors activated (4391.28 BogoMIPS).
devtmpfs: initialized
NET: Registered protocol family 16
node 0 link 0: io port [0, ffffff]
TOM: 0000000040000000 aka 1024M
Fam 10h mmconf [f8000000, fbffffff]
node 0 link 0: mmio [a0000, bffff]
node 0 link 0: mmio [40000000, 4fffffff]
node 0 link 0: mmio [50000000, 520fffff]
node 0 link 0: mmio [52100000, 522fffff]
node 0 link 0: mmio [52300000, f7ffffff]
node 0 link 0: mmio [f8000000, fbffffff] ==> none
node 0 link 0: mmio [fc000000, ff6fffff]
bus: [00, 1f] on node 0 link 0
bus: 00 index 0 [io 0x0000-0xffff]
bus: 00 index 1 [mem 0x000a0000-0x000bffff]
bus: 00 index 2 [mem 0x40000000-0xf7ffffff]
bus: 00 index 3 [mem 0xfc000000-0xffffffff]
ACPI: bus type pci registered
PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000)
PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in E820
PCI: MMCONFIG for 0000 [bus00-0f] at [mem 0xf8000000-0xf8ffffff] (base 0xf8000000) (size reduced!)
PCI: Using MMCONFIG for extended config space
PCI: Using configuration type 1 for base access
bio: create slab <bio-0> at 0
ACPI: EC: Look up EC in DSDT
ACPI: Executed 1 blocks of module-level executable AML code
ACPI: BIOS _OSI(Linux) query ignored
ACPI: Interpreter enabled
ACPI: (supports S0 S3 S4 S5)
ACPI: Using IOAPIC for interrupt routing
ACPI: Power Resource [PFA1] (off)
ACPI: No dock devices found.
PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
pci_root PNP0A08:00: host bridge window [io 0x0000-0x0cf7]
pci_root PNP0A08:00: host bridge window [io 0x0d00-0xffff]
pci_root PNP0A08:00: host bridge window [mem 0x000a0000-0x000bffff]
pci_root PNP0A08:00: host bridge window [mem 0x000c0000-0x000c3fff]
pci_root PNP0A08:00: host bridge window [mem 0x000c4000-0x000c7fff]
pci_root PNP0A08:00: host bridge window [mem 0x000c8000-0x000cbfff]
pci_root PNP0A08:00: address space collision: host bridge window [mem 0x000cc000-0x000cffff] conflicts with Video ROM [mem 0x000c0000-0x000cefff]
pci_root PNP0A08:00: host bridge window [mem 0x000d0000-0x000d3fff]
pci_root PNP0A08:00: host bridge window [mem 0x000d4000-0x000d7fff]
pci_root PNP0A08:00: host bridge window [mem 0x000d8000-0x000dbfff]
pci_root PNP0A08:00: host bridge window [mem 0x000dc000-0x000dffff]
pci_root PNP0A08:00: host bridge window [mem 0x000e0000-0x000e3fff]
pci_root PNP0A08:00: host bridge window [mem 0x000e4000-0x000e7fff]
pci_root PNP0A08:00: host bridge window [mem 0x000e8000-0x000ebfff]
pci_root PNP0A08:00: host bridge window [mem 0x000ec000-0x000effff]
pci_root PNP0A08:00: host bridge window [mem 0x40000000-0xf7ffffff]
pci_root PNP0A08:00: host bridge window [mem 0xfc000000-0xfed3ffff]
pci_root PNP0A08:00: host bridge window [mem 0xfed45000-0xffffffff]
pci 0000:00:04.0: PME# supported from D0 D3hot D3cold
pci 0000:00:04.0: PME# disabled
pci 0000:00:05.0: PME# supported from D0 D3hot D3cold
pci 0000:00:05.0: PME# disabled
pci 0000:00:11.0: reg 10: [io 0x8038-0x803f]
pci 0000:00:11.0: reg 14: [io 0x804c-0x804f]
pci 0000:00:11.0: reg 18: [io 0x8030-0x8037]
pci 0000:00:11.0: reg 1c: [io 0x8048-0x804b]
pci 0000:00:11.0: reg 20: [io 0x8010-0x801f]
pci 0000:00:11.0: reg 24: [mem 0x52307000-0x523073ff]
pci 0000:00:12.0: reg 10: [mem 0x52306000-0x52306fff]
pci 0000:00:12.2: reg 10: [mem 0x52307600-0x523076ff]
pci 0000:00:12.2: supports D1 D2
pci 0000:00:12.2: PME# supported from D0 D1 D2 D3hot
pci 0000:00:12.2: PME# disabled
pci 0000:00:13.0: reg 10: [mem 0x52305000-0x52305fff]
pci 0000:00:13.2: reg 10: [mem 0x52307500-0x523075ff]
pci 0000:00:13.2: supports D1 D2
pci 0000:00:13.2: PME# supported from D0 D1 D2 D3hot
pci 0000:00:13.2: PME# disabled
pci 0000:00:14.2: reg 10: [mem 0x52300000-0x52303fff 64bit]
pci 0000:00:14.2: PME# supported from D0 D3hot D3cold
pci 0000:00:14.2: PME# disabled
pci 0000:00:16.0: reg 10: [mem 0x52304000-0x52304fff]
pci 0000:00:16.2: reg 10: [mem 0x52307400-0x523074ff]
pci 0000:00:16.2: supports D1 D2
pci 0000:00:16.2: PME# supported from D0 D1 D2 D3hot
pci 0000:00:16.2: PME# disabled
pci 0000:01:05.0: reg 10: [mem 0x40000000-0x4fffffff pref]
pci 0000:01:05.0: reg 14: [io 0x7000-0x70ff]
pci 0000:01:05.0: reg 18: [mem 0x52200000-0x5220ffff]
pci 0000:01:05.0: reg 24: [mem 0x52100000-0x521fffff]
pci 0000:01:05.0: supports D1 D2
pci 0000:00:01.0: PCI bridge to [bus 01-01]
pci 0000:00:01.0: bridge window [io 0x7000-0x7fff]
pci 0000:00:01.0: bridge window [mem 0x52100000-0x522fffff]
pci 0000:00:01.0: bridge window [mem 0x40000000-0x4fffffff 64bit pref]
pci 0000:02:00.0: reg 10: [mem 0x51100000-0x5110ffff 64bit]
pci 0000:02:00.0: supports D1
pci 0000:02:00.0: PME# supported from D0 D1 D3hot
pci 0000:02:00.0: PME# disabled
pci 0000:00:04.0: PCI bridge to [bus 02-07]
pci 0000:00:04.0: bridge window [io 0x3000-0x6fff]
pci 0000:00:04.0: bridge window [mem 0x51100000-0x520fffff]
pci 0000:00:04.0: bridge window [mem 0x50000000-0x50ffffff 64bit pref]
pci 0000:08:00.0: reg 10: [mem 0x51000000-0x5103ffff 64bit]
pci 0000:08:00.0: reg 18: [io 0x2000-0x207f]
pci 0000:08:00.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:08:00.0: PME# disabled
pci 0000:00:05.0: PCI bridge to [bus 08-08]
pci 0000:00:05.0: bridge window [io 0x2000-0x2fff]
pci 0000:00:05.0: bridge window [mem 0x51000000-0x510fffff]
pci 0000:00:05.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
pci 0000:00:14.4: PCI bridge to [bus 09-09]
pci 0000:00:14.4: bridge window [io 0xf000-0x0000] (disabled)
pci 0000:00:14.4: bridge window [mem 0xfff00000-0x000fffff] (disabled)
pci 0000:00:14.4: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
pci_bus 0000:00: on NUMA node 0
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.AGP_._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PB4_._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PB5_._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P2P_._PRT]
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 7 10 11 12 14 15) *0
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 7 10 11 12 14 15) *0
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 7 10 11 12 14 15) *0
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 7 10 11 12 14 15) *0
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 7 10 11 12 14 15) *0
ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 7 10 11 12 14 15) *0
ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 7 10 11 12 14 15) *0
ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 7 10 11 12 14 15) *0
HEST: Table is not found!
vgaarb: device added: PCI:0000:01:05.0,decodes=io+mem,owns=io+mem,locks=none
vgaarb: loaded
PCI: Using ACPI for IRQ routing
PCI: pci_cache_line_size set to 64 bytes
reserve RAM buffer: 0000000000002000 - 000000000000ffff
reserve RAM buffer: 000000000009fc00 - 000000000009ffff
reserve RAM buffer: 000000002e54a000 - 000000002fffffff
reserve RAM buffer: 000000002fd3f000 - 000000002fffffff
reserve RAM buffer: 000000002ff00000 - 000000002fffffff
NetLabel: Initializing
NetLabel: domain hash size = 128
NetLabel: protocols = UNLABELED CIPSOv4
NetLabel: unlabeled traffic allowed by default
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
hpet0: 3 comparators, 32-bit 14.318180 MHz counter
Switching to clocksource tsc
pnp: PnP ACPI init
ACPI: bus type pnp registered
pnp: PnP ACPI: found 10 devices
ACPI: ACPI bus type pnp unregistered
system 00:01: [mem 0xfec00000-0xfec00fff] could not be reserved
system 00:01: [mem 0xfee00000-0xfee00fff] has been reserved
system 00:01: [mem 0xf8000000-0xfbffffff] could not be reserved
system 00:08: [io 0x0400-0x04cf] has been reserved
system 00:08: [io 0x04d0-0x04d1] has been reserved
system 00:08: [io 0x04d6] has been reserved
system 00:08: [io 0x0680-0x06ff] has been reserved
system 00:08: [io 0x077a] has been reserved
system 00:08: [io 0x0c00-0x0c01] has been reserved
system 00:08: [io 0x0c14] has been reserved
system 00:08: [io 0x0c50-0x0c52] has been reserved
system 00:08: [io 0x0c6c] has been reserved
system 00:08: [io 0x0c6f] has been reserved
system 00:08: [io 0x0cd0-0x0cdb] has been reserved
system 00:09: [mem 0x000e0000-0x000fffff] could not be reserved
system 00:09: [mem 0xffe00000-0xffffffff] has been reserved
system 00:09: [mem 0xfed80000-0xfed80fff] has been reserved
pci 0000:00:01.0: PCI bridge to [bus 01-01]
pci 0000:00:01.0: bridge window [io 0x7000-0x7fff]
pci 0000:00:01.0: bridge window [mem 0x52100000-0x522fffff]
pci 0000:00:01.0: bridge window [mem 0x40000000-0x4fffffff 64bit pref]
pci 0000:00:04.0: PCI bridge to [bus 02-07]
pci 0000:00:04.0: bridge window [io 0x3000-0x6fff]
pci 0000:00:04.0: bridge window [mem 0x51100000-0x520fffff]
pci 0000:00:04.0: bridge window [mem 0x50000000-0x50ffffff 64bit pref]
pci 0000:00:05.0: PCI bridge to [bus 08-08]
pci 0000:00:05.0: bridge window [io 0x2000-0x2fff]
pci 0000:00:05.0: bridge window [mem 0x51000000-0x510fffff]
pci 0000:00:05.0: bridge window [mem pref disabled]
pci 0000:00:14.4: PCI bridge to [bus 09-09]
pci 0000:00:14.4: bridge window [io disabled]
pci 0000:00:14.4: bridge window [mem disabled]
pci 0000:00:14.4: bridge window [mem pref disabled]
pci 0000:00:01.0: setting latency timer to 64
pci 0000:00:04.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
pci 0000:00:04.0: setting latency timer to 64
pci 0000:00:05.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
pci 0000:00:05.0: setting latency timer to 64
pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
pci_bus 0000:00: resource 7 [mem 0x000c0000-0x000c3fff]
pci_bus 0000:00: resource 8 [mem 0x000c4000-0x000c7fff]
pci_bus 0000:00: resource 9 [mem 0x000c8000-0x000cbfff]
pci_bus 0000:00: resource 10 [mem 0x000d0000-0x000d3fff]
pci_bus 0000:00: resource 11 [mem 0x000d4000-0x000d7fff]
pci_bus 0000:00: resource 12 [mem 0x000d8000-0x000dbfff]
pci_bus 0000:00: resource 13 [mem 0x000dc000-0x000dffff]
pci_bus 0000:00: resource 14 [mem 0x000e0000-0x000e3fff]
pci_bus 0000:00: resource 15 [mem 0x000e4000-0x000e7fff]
pci_bus 0000:00: resource 16 [mem 0x000e8000-0x000ebfff]
pci_bus 0000:00: resource 17 [mem 0x000ec000-0x000effff]
pci_bus 0000:00: resource 18 [mem 0x40000000-0xf7ffffff]
pci_bus 0000:00: resource 19 [mem 0xfc000000-0xfed3ffff]
pci_bus 0000:00: resource 20 [mem 0xfed45000-0xffffffff]
pci_bus 0000:01: resource 0 [io 0x7000-0x7fff]
pci_bus 0000:01: resource 1 [mem 0x52100000-0x522fffff]
pci_bus 0000:01: resource 2 [mem 0x40000000-0x4fffffff 64bit pref]
pci_bus 0000:02: resource 0 [io 0x3000-0x6fff]
pci_bus 0000:02: resource 1 [mem 0x51100000-0x520fffff]
pci_bus 0000:02: resource 2 [mem 0x50000000-0x50ffffff 64bit pref]
pci_bus 0000:08: resource 0 [io 0x2000-0x2fff]
pci_bus 0000:08: resource 1 [mem 0x51000000-0x510fffff]
NET: Registered protocol family 2
IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
TCP: Hash tables configured (established 131072 bind 65536)
TCP reno registered
UDP hash table entries: 512 (order: 2, 16384 bytes)
UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
NET: Registered protocol family 1
pci 0000:00:01.0: MSI quirk detected; subordinate MSI disabled
pci 0000:01:05.0: Boot video device
PCI: CLS 64 bytes, default 64
Unpacking initramfs...
Freeing initrd memory: 1556k freed
Simple Boot Flag at 0x44 set to 0x1
apm: BIOS not found.
Scanning for low memory corruption every 60 seconds
audit: initializing netlink socket (disabled)
type=2000 audit(1290023602.626:1): initialized
VFS: Disk quotas dquot_6.5.2
Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
msgmni has been set to 1493
alg: No test for stdrng (krng)
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 254)
io scheduler noop registered
io scheduler deadline registered
io scheduler cfq registered (default)
pcieport 0000:00:04.0: setting latency timer to 64
pcieport 0000:00:04.0: irq 40 for MSI/MSI-X
pcieport 0000:00:05.0: setting latency timer to 64
pcieport 0000:00:05.0: irq 41 for MSI/MSI-X
ERST: Table is not found!
isapnp: Scanning for PnP cards...
isapnp: No Plug & Play device found
Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
PNP: PS/2 Controller [PNP0303:KBC0,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
mice: PS/2 mouse device common for all mice
cpuidle: using governor ladder
cpuidle: using governor menu
TCP cubic registered
NET: Registered protocol family 17
Using IPI No-Shortcut mode
PM: Resume from disk failed.
registered taskstats version 1
Initalizing network drop monitor service
Freeing unused kernel memory: 416k freed
udev[31]: starting version 163
input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
SCSI subsystem initialized
libata version 3.00 loaded.
ahci 0000:00:11.0: version 3.0
ahci 0000:00:11.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19
ahci 0000:00:11.0: irq 42 for MSI/MSI-X
ahci 0000:00:11.0: AHCI 0001.0200 32 slots 3 ports 6 Gbps 0x7 impl SATA mode
ahci 0000:00:11.0: flags: 64bit ncq sntf ilck pm led clo pmp pio slum part sxs
scsi0 : ahci
scsi1 : ahci
scsi2 : ahci
ata1: SATA max UDMA/133 abar m1024@0x52307000 port 0x52307100 irq 42
ata2: SATA max UDMA/133 abar m1024@0x52307000 port 0x52307180 irq 42
ata3: SATA max UDMA/133 abar m1024@0x52307000 port 0x52307200 irq 42
ata3: SATA link down (SStatus 0 SControl 300)
ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata1.00: ATA-8: Hitachi HTS545025B9A300, PB2OC64G, max UDMA/133
ata1.00: 488397168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
ata1.00: configured for UDMA/133
scsi 0:0:0:0: Direct-Access ATA Hitachi HTS54502 PB2O PQ: 0 ANSI: 5
ata2.00: ATAPI: TSSTcorp CDDVDW TS-L633C, TF20, max UDMA/100
ata2.00: configured for UDMA/100
scsi 1:0:0:0: CD-ROM TSSTcorp CDDVDW TS-L633C TF20 PQ: 0 ANSI: 5
sd 0:0:0:0: [sda] 488397168 512-byte logical blocks: (250 GB/232 GiB)
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sda:sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
Uniform CD-ROM driver Revision: 3.20
sr 1:0:0:0: Attached scsi CD-ROM sr0
sda1 sda2 sda3 sda4
sd 0:0:0:0: [sda] Attached SCSI disk
EXT4-fs (sda3): mounted filesystem with ordered data mode. Opts: (null)
rtc_cmos 00:04: RTC can wake from S4
rtc_cmos 00:04: rtc core: registered rtc_cmos as rtc0
rtc0: alarms up to one day, 114 bytes nvram, hpet irqs
udev[1064]: starting version 163
atl1c 0000:08:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
atl1c 0000:08:00.0: setting latency timer to 64
atl1c 0000:08:00.0: version 1.0.0.2-NAPI
thermal LNXTHERM:01: registered as thermal_zone0
ACPI: Thermal Zone [THZN] (58 C)
ACPI: acpi_idle registered with cpuidle
ACPI: processor limited to max C-state 1
input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input1
ACPI: Power Button [PWRB]
input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input2
ACPI: Lid Switch [LID]
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
ACPI: Power Button [PWRF]
input: PC Speaker as /devices/platform/pcspkr/input/input4
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
sd 0:0:0:0: Attached scsi generic sg0 type 0
sr 1:0:0:0: Attached scsi generic sg1 type 5
shpchp 0000:00:01.0: HPC vendor_id 1022 device_id 9602 ss_vid 1022 ss_did 9602
shpchp 0000:00:01.0: Cannot reserve MMIO region
shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
ACPI: AC Adapter [ADP0] (on-line)
cfg80211: Calling CRDA to update world regulatory domain
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci_hcd 0000:00:12.2: PCI INT B -> GSI 17 (level, low) -> IRQ 17
ehci_hcd 0000:00:12.2: setting latency timer to 64
ehci_hcd 0000:00:12.2: EHCI Host Controller
ehci_hcd 0000:00:12.2: new USB bus registered, assigned bus number 1
ehci_hcd 0000:00:12.2: debug port 1
ehci_hcd 0000:00:12.2: irq 17, io mem 0x52307600
ehci_hcd 0000:00:12.2: USB 2.0 started, EHCI 1.00
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 5 ports detected
ehci_hcd 0000:00:13.2: PCI INT B -> GSI 17 (level, low) -> IRQ 17
ehci_hcd 0000:00:13.2: setting latency timer to 64
ehci_hcd 0000:00:13.2: EHCI Host Controller
ehci_hcd 0000:00:13.2: new USB bus registered, assigned bus number 2
ehci_hcd 0000:00:13.2: debug port 1
ehci_hcd 0000:00:13.2: irq 17, io mem 0x52307500
ehci_hcd 0000:00:13.2: USB 2.0 started, EHCI 1.00
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 5 ports detected
ehci_hcd 0000:00:16.2: PCI INT B -> GSI 17 (level, low) -> IRQ 17
ehci_hcd 0000:00:16.2: setting latency timer to 64
ehci_hcd 0000:00:16.2: EHCI Host Controller
ehci_hcd 0000:00:16.2: new USB bus registered, assigned bus number 3
ehci_hcd 0000:00:16.2: debug port 1
ehci_hcd 0000:00:16.2: irq 17, io mem 0x52307400
ehci_hcd 0000:00:16.2: USB 2.0 started, EHCI 1.00
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 4 ports detected
ACPI: Fan [FAN1] (off)
ACPI: Battery Slot [BAT0] (battery present)
piix4_smbus 0000:00:14.0: SMBus Host Controller at 0xb00, revision 0
acpi device:02: registered as cooling_device2
input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:00/LNXVIDEO:00/input/input5
ACPI: Video Device [VGA] (multi-head: yes rom: no post: no)
usb 2-2: new high speed USB device using ehci_hcd and address 2
Linux agpgart interface v0.103
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
ohci_hcd 0000:00:12.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
ohci_hcd 0000:00:12.0: setting latency timer to 64
ohci_hcd 0000:00:12.0: OHCI Host Controller
ohci_hcd 0000:00:12.0: new USB bus registered, assigned bus number 4
ohci_hcd 0000:00:12.0: irq 18, io mem 0x52306000
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 5 ports detected
ohci_hcd 0000:00:13.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
ohci_hcd 0000:00:13.0: setting latency timer to 64
ohci_hcd 0000:00:13.0: OHCI Host Controller
ohci_hcd 0000:00:13.0: new USB bus registered, assigned bus number 5
ohci_hcd 0000:00:13.0: irq 18, io mem 0x52305000
hub 5-0:1.0: USB hub found
hub 5-0:1.0: 5 ports detected
ohci_hcd 0000:00:16.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
ohci_hcd 0000:00:16.0: setting latency timer to 64
ohci_hcd 0000:00:16.0: OHCI Host Controller
ohci_hcd 0000:00:16.0: new USB bus registered, assigned bus number 6
ohci_hcd 0000:00:16.0: irq 18, io mem 0x52304000
ath9k 0000:02:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
ath9k 0000:02:00.0: setting latency timer to 64
hub 6-0:1.0: USB hub found
hub 6-0:1.0: 4 ports detected
ath: EEPROM regdomain: 0x65
ath: EEPROM indicates we should expect a direct regpair map
ath: Country alpha2 being used: 00
ath: Regpair used: 0x65
[drm] Initialized drm 1.1.0 20060810
phy0: Selected rate control algorithm 'ath9k_rate_control'
Registered led device: ath9k-phy0::radio
Registered led device: ath9k-phy0::assoc
Registered led device: ath9k-phy0::tx
Registered led device: ath9k-phy0::rx
phy0: Atheros AR9285 Rev:2 mem=0xf0c60000, irq=16
Initializing USB Mass Storage driver...
scsi3 : usb-storage 2-2:1.0
usbcore: registered new interface driver usb-storage
USB Mass Storage support registered.
usb 3-4: new high speed USB device using ehci_hcd and address 2
HDA Intel 0000:00:14.2: PCI INT A -> GSI 16 (level, low) -> IRQ 16
HDA Intel 0000:00:14.2: setting latency timer to 64
[drm] radeon defaulting to kernel modesetting.
[drm] radeon kernel modesetting enabled.
radeon 0000:01:05.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
radeon 0000:01:05.0: setting latency timer to 64
[drm] initializing kernel modesetting (RS880 0x1002:0x9712).
[drm] register mmio base: 0x52200000
[drm] register mmio size: 65536
ATOM BIOS: Tos_Berlin10AD
[drm] Clocks initialized !
radeon 0000:01:05.0: VRAM: 256M 0xC0000000 - 0xCFFFFFFF (256M used)
radeon 0000:01:05.0: GTT: 512M 0xA0000000 - 0xBFFFFFFF
[drm] Detected VRAM RAM=256M, BAR=256M
[drm] RAM width 32bits DDR
[TTM] Zone kernel: Available graphics memory: 382460 kiB.
[TTM] Initializing pool allocator.
[drm] radeon: 256M of VRAM memory ready
[drm] radeon: 512M of GTT memory ready.
[drm] radeon: irq initialized.
[drm] GART: num cpu pages 131072, num gpu pages 131072
[drm] Loading RS780 Microcode
Synaptics Touchpad, model: 1, fw: 7.2, id: 0x1c0b1, caps: 0xd04731/0xa40000/0xa0000
synaptics: Toshiba Satellite Pro C650D detected, limiting rate to 40pps.
input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input6
[drm] ring test succeeded in 0 usecs
[drm] radeon: ib pool ready.
[drm] ib test succeeded in 0 usecs
[drm] Enabling audio support
[drm] Unknown TV standard; defaulting to NTSC
[drm] Radeon Display Connectors
[drm] Connector 0:
[drm] VGA
[drm] DDC: 0x7e40 0x7e40 0x7e44 0x7e44 0x7e48 0x7e48 0x7e4c 0x7e4c
[drm] Encoders:
[drm] CRT1: INTERNAL_KLDSCP_DAC1
[drm] Connector 1:
[drm] LVDS
[drm] DDC: 0x7e50 0x7e50 0x7e54 0x7e54 0x7e58 0x7e58 0x7e5c 0x7e5c
[drm] Encoders:
[drm] LCD1: INTERNAL_KLDSCP_LVTMA
[drm] radeon: power management initialized
[drm] fb mappable at 0x40141000
[drm] vram apper at 0x40000000
[drm] size 4325376
[drm] fb depth is 24
[drm] pitch is 5632
scsi 3:0:0:0: Direct-Access Generic- Multi-Card 1.00 PQ: 0 ANSI: 0 CCS
sd 3:0:0:0: Attached scsi generic sg2 type 0
sd 3:0:0:0: [sdb] Attached SCSI removable disk
Linux video capture interface: v2.00
uvcvideo: Found UVC 1.00 device USB Camera (10f1:1a2a)
input: USB Camera as /devices/pci0000:00/0000:00:16.2/usb3/3-4/3-4:1.0/input/input7
usbcore: registered new interface driver uvcvideo
USB Video Class driver (v0.1.0)
Console: switching to colour frame buffer device 170x48
fb0: radeondrmfb frame buffer device
drm: registered panic notifier
Slow work thread pool: Starting up
Slow work thread pool: Ready
[drm] Initialized radeon 2.5.0 20080528 for 0000:01:05.0 on minor 0
EXT4-fs (sda3): re-mounted. Opts: (null)
EXT4-fs (sda3): re-mounted. Opts: (null)
EXT4-fs (sda4): mounted filesystem with ordered data mode. Opts: (null)
Adding 265068k swap on /dev/sda2. Priority:-1 extents:1 across:265068k
atl1c 0000:08:00.0: irq 43 for MSI/MSI-X
atl1c 0000:08:00.0: irq 43 for MSI/MSI-X
wlan0: deauthenticating from 00:1d:7e:af:65:43 by local choice (reason=3)
wlan0: deauthenticating from 00:1d:7e:af:65:43 by local choice (reason=3)
wlan0: authenticate with 00:1d:7e:af:65:43 (try 1)
wlan0: authenticated
wlan0: associate with 00:1d:7e:af:65:43 (try 1)
wlan0: RX AssocResp from 00:1d:7e:af:65:43 (capab=0x421 status=0 aid=2)
wlan0: associated
cfg80211: Calling CRDA for country: NA
fuse init (API version 7.14)
ata1.00: configured for UDMA/133
ata1: EH complete
EXT4-fs (sda3): re-mounted. Opts: commit=0
EXT4-fs (sda4): re-mounted. Opts: commit=0
NET: Registered protocol family 10
lo: Disabled Privacy Extensions
ADDRCONF(NETDEV_UP): eth0: link is not ready
wlan0: no IPv6 routers present
process `skype' is using obsolete setsockopt SO_BSDCOMPAT
usb 1-2: new high speed USB device using ehci_hcd and address 2
scsi4 : usb-storage 1-2:1.1
scsi 4:0:0:0: Direct-Access ZTE Mass Storage ffff PQ: 0 ANSI: 2
sd 4:0:0:0: Attached scsi generic sg3 type 0
sd 4:0:0:0: [sdc] Attached SCSI removable disk
usb 1-2: USB disconnect, address 2
amixer
Simple mixer control 'Master',0
Capabilities: pvolume pswitch pswitch-joined penum
Playback channels: Front Left - Front Right
Limits: Playback 0 - 74
Mono:
Front Left: Playback 74 [100%] [0.00dB] [on]
Front Right: Playback 74 [100%] [0.00dB] [on]
Simple mixer control 'PCM',0
Capabilities: pvolume penum
Playback channels: Front Left - Front Right
Limits: Playback 0 - 255
Mono:
Front Left: Playback 213 [84%] [-8.40dB]
Front Right: Playback 213 [84%] [-8.40dB]
Simple mixer control 'Mic B',0
Capabilities: cswitch cswitch-joined cswitch-exclusive penum
Capture exclusive group: 0
Capture channels: Mono
Mono: Capture [off]
Simple mixer control 'Mic C',0
Capabilities: cswitch cswitch-joined cswitch-exclusive penum
Capture exclusive group: 0
Capture channels: Mono
Mono: Capture [off]
Simple mixer control 'Mic E',0
Capabilities: cswitch cswitch-joined cswitch-exclusive penum
Capture exclusive group: 0
Capture channels: Mono
Mono: Capture [on]
Simple mixer control 'Mic F',0
Capabilities: cswitch cswitch-joined cswitch-exclusive penum
Capture exclusive group: 0
Capture channels: Mono
Mono: Capture [off]
Simple mixer control 'IEC958',0
Capabilities: pswitch pswitch-joined penum
Playback channels: Mono
Mono: Playback [on]
Simple mixer control 'IEC958 Default PCM',0
Capabilities: pswitch pswitch-joined penum
Playback channels: Mono
Mono: Playback [on]
Simple mixer control 'Capture',0
Capabilities: cvolume cswitch penum
Capture channels: Front Left - Front Right
Limits: Capture 0 - 80
Front Left: Capture 80 [100%] [6.00dB] [on]
Front Right: Capture 80 [100%] [6.00dB] [on]
Simple mixer control 'Analog Mic Boost',0
Capabilities: cenum
Items: '0dB' '10dB' '20dB' '30dB' '40dB'
Item0: '0dB'
Simple mixer control 'Digital',0
Capabilities: cvolume penum
Capture channels: Front Left - Front Right
Limits: Capture 0 - 120
Front Left: Capture 98 [82%] [19.00dB]
Front Right: Capture 98 [82%] [19.00dB]
Any help would be thoroughly appreciated.
Thanks!
John.firstly, sorry for my english
I have HP ProBook 4515s. the lspci says the same on 00:14.*
00:00.0 Host bridge: Advanced Micro Devices [AMD] RS880 Host Bridge
00:01.0 PCI bridge: Advanced Micro Devices [AMD] RS780 PCI to PCI bridge (int gfx)
00:04.0 PCI bridge: Advanced Micro Devices [AMD] RS780 PCI to PCI bridge (PCIE port 0)
00:07.0 PCI bridge: Advanced Micro Devices [AMD] RS780 PCI to PCI bridge (PCIE port 3)
00:09.0 PCI bridge: Advanced Micro Devices [AMD] RS780 PCI to PCI bridge (PCIE port 4)
00:11.0 SATA controller: ATI Technologies Inc SB700/SB800 SATA Controller [AHCI mode]
00:12.0 USB Controller: ATI Technologies Inc SB700/SB800 USB OHCI0 Controller
00:12.1 USB Controller: ATI Technologies Inc SB700 USB OHCI1 Controller
00:12.2 USB Controller: ATI Technologies Inc SB700/SB800 USB EHCI Controller
00:13.0 USB Controller: ATI Technologies Inc SB700/SB800 USB OHCI0 Controller
00:13.1 USB Controller: ATI Technologies Inc SB700 USB OHCI1 Controller
00:13.2 USB Controller: ATI Technologies Inc SB700/SB800 USB EHCI Controller
00:14.0 SMBus: ATI Technologies Inc SBx00 SMBus Controller (rev 3c)
00:14.2 Audio device: ATI Technologies Inc SBx00 Azalia (Intel HDA)
00:14.3 ISA bridge: ATI Technologies Inc SB700/SB800 LPC host controller
00:14.4 PCI bridge: ATI Technologies Inc SBx00 PCI to PCI Bridge
00:14.5 USB Controller: ATI Technologies Inc SB700/SB800 USB OHCI2 Controller
00:18.0 Host bridge: Advanced Micro Devices [AMD] Family 10h Processor HyperTransport Configuration
00:18.1 Host bridge: Advanced Micro Devices [AMD] Family 10h Processor Address Map
00:18.2 Host bridge: Advanced Micro Devices [AMD] Family 10h Processor DRAM Controller
00:18.3 Host bridge: Advanced Micro Devices [AMD] Family 10h Processor Miscellaneous Control
00:18.4 Host bridge: Advanced Micro Devices [AMD] Family 10h Processor Link Control
01:05.0 VGA compatible controller: ATI Technologies Inc M880G [Mobility Radeon HD 4200]
01:05.1 Audio device: ATI Technologies Inc RS880 Audio Device [Radeon HD 4200]
02:00.0 Ethernet controller: Marvell Technology Group Ltd. 88E8072 PCI-E Gigabit Ethernet Controller (rev 10)
06:00.0 Network controller: Broadcom Corporation BCM4312 802.11b/g LP-PHY (rev 01)
looks like we've got the same chipset.
one stupid pdf-file found on hp.com sais that the codec is ADI 1984AJCPZ High Definition CODEC, but I can't be sure...
i tried different model= parameters to snd-hda-intel module, but nothin helps
i can capture external jack-in microphone only if external jack-out is free (which is completely stupid for home audio studio experiencing)
internal phones are not mute automatically until jack-in freed (but i can easily mute them in alsamixer instead)
if anyone find a workaround or anything useful, please report here or use my contacts -
Why is youtube audio working but not video?
Youtube worked well 2 days ago but since then only the audio has been working with a blacked out background....I haven't changed anything just updated software in App Store... any suggestions?
First to do is to uninstall all previous versions of flash player by using Flash Player Uninstaller.
After you update directly from Adobe Flash Player Software website, repair permissions and restart your computer. -
Audio working but not the video?
I have iChat AV 3.1.8 (v445)
And OSX (10.4.11)
I am trying to connect to a user using AIM, and the video connection is establishing but it wont show the video, only the audio.
Things I think you would need to know.
Using Wi-Fi connection.
The other user does not have a camera attached.
Have my restriction set to 200.
Using Comcast.
Now when the user connects their camera I get a error message saying "There was a communication error during your chat" with a send to Apple option.I've been having this problem since upgrading to leopard. On my iMac with Tiger i could video chat with AIM users in a one way chat without any problems. Upgraded to leopard and all they have is a black screen, but the audio is coming through. The only thing that was changed was the OS Version.
I am also having the same exact problem on my new MacBook, which came with leopard installed.
On a side note, i can nolonger video chat with Tiger users, but everything seems to be fine with other Leopard users.
Seems like there are a lot of these problems going around. Any idea on an ETA for a fix? -
Video and Audio work but not screen share
I am able to connect and video chat with a mb running 10.5.4.
When I request screen share, they authorize, seems to start to connect then I get the message "screen sharing could not be established."
Is this a port issue?
Thanks in advance!Oh My !! You are doing things the difficult way.
Hopefully you have got both ends set in System Preferences > Quicktime > Streaming to 1.5Mbps
(if you have to change iChat will need restarting).
In the iChat Menu >Preferences > Video Section > Bandwidth drop down both ends need to be on 500kbps to get around what Comcast and Road Runner do to manage their Data Stream. This can be set in a chat. The two ISP s do things to try and stop people using File Sharing apps like BitTorrent but it impinges on iChat.
The reason why I say it is a port issue.
I run an App called Little Snitch.
It tells me the ports and the IPs applications are connecting to.
In a successful Video chats I see port 16402 on people's Public IP and if they have a Router a LAN IP as well.
When in a Screen Share situation I also get another port.
Screen Sharing in iChat iss related to the way it is/was done in Apple Remote Desktop (ARD).
in fact in the iChatAgent .plist you can see the Setting
(It is in fact Off in this Pic)
Apple Remote Desktop uses port 5900 and 5988.
However, Little Snitch reports to me a fairly random port when I use it and shows a number in the 50000 range.
I use UPnP in my combined Modem/router which seems to cope with this random port.
UPnP (Universal Plug and Play) allows any port the App wants to open to be open - control is with the App.
This Doc by Apple tells you the ports to open if Port Forwarding for iChat 3
It includes the Bonjour ones, the Jabber ones the AIM ones and the A/V ones.
http://support.apple.com/kb/HT1507?viewlocale=en_US
This second Doc by Apple is about the port changes to iChat 4
http://support.apple.com/kb/HT2282?viewlocale=en_US
This one only tells you about the A/V ports and not the other you need.
AS it is short on info that is known about it stands to reason the info on Screen Sharing ports is also missing.
This link is about the Linksys WRT54GS
http://portforward.com/english/routers/port_forwarding/Linksys/WRT54GS/iChat.htm
Near the top of the page is the Info to use in a web browser to access the set up pages.
Follow the Instructions to to access the device and set the Unblocking of Anonymous Pings in the Security page.
Stop following the Instructions and go to the Administration page.
In here you will find UPnP.
This should be Enabled (Save Settings if you need to)
You will see in the rest of the Instructions that Port Forwarding is in Applications and Gaming as a sub tab. If anything is set here it will need to be Disabled.
As will anything in Port Triggering and DMZ tabs.
The Linksys WCG200
I can not see the one with cc at the end on the Port Forward.com list so I have picked version 2
http://portforward.com/english/routers/port_forwarding/Linksys/WCG200v2/iChat.ht m
You can see the pics are similar.
Although it does not say, also disable the Block to Responses to Internet Pings on the Security page (as well as having the Firewall Off).
Then do the same as above. Enable UPnP and Save Settings - Disable anything in Applications and Gaming and again save settings.
As I said before UPnP will allow the apps to open the ports they need and will therefore cope with the fact we don't know the precise port iChat is supposed to use.
Out of the Box list.
Apple have a list that was started at iChat 2
http://support.apple.com/kb/HT1787?viewlocale=en_US
Although the Doc was updated in June this was only for the new numbering system.
You will notice under the table that some still need tweaks.
Realistically most devices will need some tweaks and turning on UPnP can be the smallest.
Most Netgears have UPnP on by default.
However they have the Internet Ping Blocking and they have a DOS or SPI firewall that can impinge on iChat 4 as all the data is on one port and Faster internet speeds mean more data can be sent bumping into the threshold that these work (And get in the way).
MIMO devices that tend to come with two or more antenna are a problem for iChat as the Wireless signal is effectively duplicated and iChat see this as two network connections and can not use them - if you are thinking of being wireless.
9:04 PM Wednesday; August 20, 2008 -
Youtube seems to load multiple times, audio works, no video
Youtube works on IE. In Firefox it seems to load multiple copies. The time bar at the bottom has many segments. The audio works, but no video. I disabled Flashblock, does not help.
I have the same problem, with vista, on an intel iMac.
I tried uninstalling the driver, restarting, and then bootcamp automatically reinstalls the driver, but that didn't fix it. The driver is there and everything appears to be as it should but just no sound comes out unless I set headphones to the default, in which case the audio is way too quiet.
I'm trying to repair my bootcamp install from my leopard disk but I got an error code 2727 and couldn't even attempt to try fixing the issue that way.
It's so annoying, because I'm trying to play starcraft ii, which is impossible macside because mac os insists upon having ridiculous mouse acceleration. I managed campaign macside but now it's time for some serious competitive play and I just need to do this on windows, but no sound. -
Getting HDMI audio working (ASUS P5E-VM HDMI mATX)
Hey everyone. So I'm trying to create a HTPC using this ASUS P5E-VM HDMI mATX motherboard with a 3.0 GHz E8400 Core 2 Duo and 4GB RAM. I've installed Arch 64-bit on it and have full 1080p video showing nicely on my HD TV with Gnome set up quite nicely. I've gone through the Wiki for the documentation for getting ALSA working but I cannot get any audio working. I have 3 outputs on this board, the line-out on the back, the headphones on the front and the HDMI audio on the back.
I admit I am an ALSA/Linux Audio newb but it seems like everything is set up properly comparing it to the Wiki document. I get very faint audio from the headphones but nothing else. I'd really like to get the HDMI audio working but I am completely and totally lost as to what to do. I don't even know what devices and modules I should be looking for. I'm pretty sure the sound chipset is Intel HDA Audio. Although, under Vista it comes back as Realtek audio controller.
Any and all help would be greatly appreciated. Thanks!While searching for the solution myself I stumbled over this rather old thread and having found the solution it might be interesting for someone out there :-)
HDMI audio is working fine with the Asus P5E-V, the problem is that the IEC958 device has to be unmuted on the command line (since it is not showing in any mixer):
(1)amixer --card 0 |grep 958
Then unmute the devices (in my case to unmute "'IEC958',1" was sufficient):
(2)amixer --card 0 sset 'IEC958',0 unmute
(3)amixer --card 0 sset 'IEC958',1 unmute
(4)amixer --card 0 sset 'IEC958 Default PCM',0 unmute -
Import Video - only audio working
Hello,
I have figured out how to get File>Import Video work.
The audio works, but the video does not. I only get a white
screen.
Suggestions or a great tutorial?
Thanks!Hello,
I have figured out how to get File>Import Video work.
The audio works, but the video does not. I only get a white
screen.
Suggestions or a great tutorial?
Thanks! -
Macbook pro to HDTV, video is working but audio is not working, how to make audio work as well
Macbook pro to HDTV, video is working but audio is not working, how to make audio work as well
If you use an HDMI cable, the audiostream will be integrated, so there will be sound when using an HDMI cable!
Not necessarily. That only works as stated if you have one of the most recent MBP's that has a built-in HDMI port.
If the MBP only has a Thunderbolt or miniDisplayPort, you need an appropriate adapter cable and even if you use an HDMI adapter or cable to connect to your HDTV there is no guarantee it will carry audio. You have to determine if your specific MBP model supports audio out through its miniDisplayPort or Thunderbolt output, and whether the adapter does likewise. -
Looking for a reading App.
iPad (iOS 7.1.2) - Kindle.
I am looking for a good app that can help a college student with reading books that cannot be found on audio book. I have tried voice over and it works but it's very monotone and it really strings things together.
- I'm willing to pay for a good app but I can't seem to sort though the many that are out there. Any suggestions.Ah. I'm surprised, but there we go.
Have a look here ...
http://jam.hitsquad.com/vocal/about2136.html
(courtesy of googling 'OSX free multitrack recording software')
Didn't have time to do more than skim, but 'Ardour' looked promising. Protools is the only one I've used, the full product is one of the industry standards, but the free 'lite' version listed here seems to be limited to 2 in/out as well.
Referring to your original post, I'd think trying to write or 'script' something would be a nightmare ... synchronisation of streams within something like Applescript would be a major issue, quite apart from anything else.
G5 Dual 2.7, MacMini, iMac 700; P4/XP Desk & Lap. Mac OS X (10.4.8) mLan:01x/i88x; DP 5.1, Cubase SX3, NI Komplete, Melodyne. -
I want to use a FM radio app to Airplay music through my Apple TV (by using the synchronizing function). Works, but after some minutes, the Airplay audio output setting switches back to iPad. Why? Solution?
Why don't use iTunes? Because this just needs to many handling in order to get it where i want it (in general, this whole idea of doing everything online just works likes... ). An app is easier (that's why it is invented).Hey AKfishgirl,
Thanks for the question. The common variable here is your Wi-Fi router. Let’s check to see if the commonly used ports are being blocked by a firewall on your router:
Apple TV: TCP and UDP ports and protocols used
http://support.apple.com/kb/HT2463
Well known TCP and UDP ports used by Apple software products
http://support.apple.com/kb/HT6175
Thanks,
Matt M.
Maybe you are looking for
-
My Photosmart 5512 can copy, scan, print documents, but it won't print web pages
Yesterday, having had problems scanning on my HP Photosmart 5512 All-in-One printer after an HP update, I went to the HP support site and downloaded the most recent driver for my printer. Once it had finished downloading, it automatically went into
-
Internal DVD disappears including from ATA and Burning in Mac info
I have an open ticket on this issue, my internal DVD appears and disappears. I'm not sure if this is a loose internal connection or a firmware issue. If it is a loose connection, I guess that I will have to send it back to Apple for repair. I underst
-
Extraction of Purchase Order from BOP background Worklist
Hi to all, have you got any idea on how to have on the BOP worklist the purchase order or other categories that have been taken in consideration during the background job? Are notes 376773 and 377186 the right once? Thanks Maria
-
Letting other users see my objects
Suppose I have USER-A which has objects like tables, triggers, procedures and jobs and I want USER-B to have READ-ONLY access to these objects. What is the best way in doing it, assuming they are in different schemas? Recall that you can only grant s
-
The Ni Update service does't work, it needs a new version but can't download it.
1-When I start VISAIC.exe in Windows 7, the following error appears: Run Time error R60360 -CRT not initialized. 2-The Ni Update service in MAX does't work, it needs a new version but can't download it. What can I do ? Thanks in advance