Audio works fine with "speakers" as default...doesn't work with spdif as defa

I'm using vista 64 bit. Last night I installed the 64 bit drivers for my x-fi extreme gamer card and my sound worked fine. I never checked to see what default device vista was using. In troubleshooting media player video (and possible codec conflicts) I restored all the defaults in movie maker. Suddenly I had no sound. I right clicked the speaker icon in the task bar, chose playback devices and noticed spdif was the default device. Once I made "speakers" the default device my sound returned. So my question is which device should be the default and if its spdif then I have a sound problem I didn't have when I first installed the drivers.

I'm guessing speakers is the default. I was trying to decide if changing deaults in movie maker caused the sound default to be moved from speakers to spdif or if spdif was the default all along.
edit: Nevermind, I realize now speakers would be the default considering spdif is for digital connections.

Similar Messages

So i got my iphone 6 and works fine with the bluetooth on my lexus until i plug in the charger. When i do so the music you can't hear the music. When i have it unplugged the music plays fine through the speakers.

So i got my iphone 6 and the music works fine with the bluetooth on my lexus until i plug it in to the USB charger. Then you can't hear the music. When i have it unplugged the music plays fine through the speakers.
When i get in the car, if the audio is set on bluetooth the music will start playing automatically without me doing anything even if i don't have the music (itunes) running.

Hi . I Reset My iPhone & I Do Not Know The iCloud To Get pass Activation Screen.I Need To Find Out My IMEI Number From Here.My Phone Doesn't Take A Sim So It's Not On The Slot. It's Not Located On The Back Of My Phone. & When I Press This "i" on the Home Screen A Different Number Pops Up But Not The IMEI . Can You Please Give Me Answers To Find My IMEI Number !!??

With 10.2 I can only use system speaker output for audio, NOT my RME FF400 I used previously. The FF400 works fine with other apps. How can I set this device in FCP 10.2? (it is set in both system preferences and midi)

With 10.2 I can only use a system (e.g. speaker) output for audio, NOT my RME FF400 I used without any problems previously. The FF400 works fine with other apps (some like TwistedWave) setup in the program, and others (like Spotify) using system preferences & audio midi setup. How can I set the FF400 to be the sound output device in FCP 10.2? N.B. The FF400 is set as sound output device in both system preferences and audio midi setup.

From the fcp.co forum. See if this does anything for you.
simon_hutchings
OFFLINE
Junior Boarder
Posts: 24
Thank you received: 5
Karma: 1
I have the solution! Well it at least worked for me. This is the response I got from Apple, Can you please try the following steps towards fixing your audio issue, and report back with your results?
1. Open the application Audio Midi Setup (located in Applications : Utilities)
2. Select the Output Tab for the current output device
3. Select the Configure Speakers option
4. Select the Multichannel tab
5. Change the setting to Stereo Now mine was set to stereo but the left channel wasn't showing left. re-clicking on stereo reloaded the settings and after clicking apply it worked.

I am having trouble with my speakers not working while online in particular on windows.My audio works when playing audio files

I am having trouble with my speakers not working while online particular on facebook. My audio works when playing audio files.

Hi,
Did it happen all the time or sometime?
Please check online browser status:
Click Volume icon in the taskbar, click Mixer link button as below:
If it's fine, follow this guide to run troubleshooter to detect and fix the issue:
Tips for fixing common sound problems
http://windows.microsoft.com/en-in/windows/tips-fixing-common-sound-problems#tips-fixing-common-sound-problems=windows-7
Meanwhile, this similar thread also could be referred:
https://social.technet.microsoft.com/forums/ie/en-US/a4a1cfe5-93a5-4c0b-9bf6-f7db0304f2ba/no-sound-on-youtube-or-any-other-webpage
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact [email protected]

Lastest firefox version not compatible with FlashPlayer.. fine with Explorer, but with Firefox there is no audio.. tried reloads, audio changes.. nothing works.

new version of Firefox problems with Adobe Flash Player.. will not play with sound on any internet apps... works fine with Windows Explorer, but not with Firefox. Tried several audio default settings, changes, and reloaded Flash Player.. nothing changes.

hello, unfortunately this seems to be a bug in adobes flash plugin 11.3 (IE & chrome get supplied with a different veriant of the plugin by adobe).
please refer to the following forum entry on how to handle the issue or report the problem with your system details to adobe.
http://forums.adobe.com/message/4483563
https://bugbase.adobe.com/index.cfm?event=bug&id=3210964

Problem with audio of my notebook. Audio works through pc speakers and earphones at the same time

Hi all,
thanks in advance for your advices.
I have a problem with my notebook (HP pavilion g6 2305 sl).
The problem is that when I connect my earphones the audio of my pc don't stop, hence I can hear (music, film, ...) both by earphones and speakers at the same time.
I tried to install again the latest driver audio, but nothing was changed.
I tried to use another pair of earphones, but nothing.
I have noted that if I connect the Jack at my pc, but not until the end, the audio stops from the speakers and goes through the earphones, but only if the jack is not completly inserted in the notebook.
I read a lot of forum on the web but I'm not able to find a solution for my problem.
(ps. the problem comes out suddenly, without any signal. I don't have installed any update or new software before the problem's start)

Right click on speaker icon, lower right screen.
Choose playback devices.
Select "speakers and headphones" as your default.
Disable "communications headphones".

I am trying to watch Prof. Susskind's video lectures from Stanford univ.U-tube lec work fine.With itunes video and audio have synch problem.Is there a way to fix this or the people who uploaded messed up and it is too late?

I am trying to watch Prof. Susskind's lectures from Stanford Univ. U-tube lectures work fine.With I-tunes, there is a synchronization problem between audio and video. Is there a way to fix this or the people who uploaded messed up and it is too late?

I had thought this situation was solved but it just got worse. In addition to being without service for several days I am now being charged a cancellation fee for a broadband service that BT disconnected in error. BT Vision was also terminated by BT but the set up charges are still in place. Does anyone know who the relevant Ombudsman is? I called BT from America on Friday - for an hour - while someone called Aruj sorted out why there is an order 'in progress' that I didn't initiate; why I have fees relating to a problem created by BT and why there are references to a house move that didn't take place and a BT Vision service I no longer have but didn't cancel myself. He assured me it would be rectified and my bill would be reduced by 139 pounds and we would get confirmation of this later that day. I asked him what chance there was that this would not actually happen - he said no chance at all; my new bill would be 23.50.
There was no text message. An online chat person today told me there had been a fee reduction request which had been declined and there was nothing else he could help me with as he dealt only with broadband. But he would get BT Vision to email me. They always seem so helpful.............
I'm sure I'm listed somewhere as 'a problem', there's no other explanation for why I get the runaround

Hi, I trimmed an audio regin in the audio track edior with "Snap Edits to Zero Crossings" on. But I zoom in.the waveform was not ended at Zero point. Why? In the audio file editork, "Snap Edits to Zero Crossings" option works fine.

Hi,
I trimmed an audio regin in the audio track edior with "Snap Edits to Zero Crossings" on.
But I zoom in、the waveform was not ended at Zero point.
Why?
In the audio file editork, "Snap Edits to Zero Crossings" option works fine.

correction needs to be made to step #14, I typed:
14) Point to the start or end one of the clips, when you see the icon showing arrows going either way, right click and drag your clips to roughly match up with the timeline selection, then zoom in further and adjust the clip start and end points to match up exactly with the timeline selection start and endpoints.
Here is the correction, THE CORRECTED PARTS ARE CAPITALIZED:
14) Point to the start or end OF one of the clips, when you see the icon showing arrows going either way, LEFT-CLICK and drag your clips to roughly match up with the timeline selection, then zoom in further and adjust the clip start and end points to match up exactly with the timeline selection's start and end points.
Another Correction:
Originally read:
Addendum: IF you have 2 files selected and click "Edit" to go to Edit view, it will give you the file of the clip you selected first, not 2nd. You must then go back to MT view, de-select the clip you selected first, then de-select the clip you want to edit, then RE-select the clip you want to edit.
Here is the the correction, CORRECTED PARTS ARE CAPITALIZED:
Addendum: IF you have 2 files selected and click "Edit" to go to Edit view, it will give you the file of the clip you selected first, not 2nd. IF YOU WANT TO EDIT THE 2ND FILE YOU SELECTED IN MULTI-TRACK VIEW, You must go back to Multi-track view, de-select the clip you selected first, then de-select the clip you want to edit, then RE-select the clip you want to edit, THEN CLICK "EDIT" TO GO TO EDIT VIEW.

Audio in is working, but no audio out on internal speakers (with or without headphones.)

Audio in is working, but no audio out on internal speakers (with or without headphones.)

Reset PRAM. http://support.apple.com/kb/PH18761
Reset SMC. http://support.apple.com/kb/HT3964
Choose the appropriate method.
Best.

My Bose Companion 5 speakers are not getting detected in mac pro. They are working fine with other machines (including mac).

My bose companion 5 speakers are not getting detected on Mac Pro. They are working fine with other machines (including friend's mac)

Same Issue here. I had a similar issue with my Bose USB speakers when I upgraded to Maverick. I've had the speakers since 2010 and had no issue with my 2006 Mac Pro or my iMac till the Maverick upgrade, contacted both Apple and Bose with no luck but an Apple update fixed the issue.
I wonder if other USB speakers have an issue or is it just BOSE USB speakers. But my Companions did work fine with my Mac Pro and iMac 27 till the Yosemite update with an initial issue with the Maverick upgrade it was definitely an Apple issue not Bose. I have both Boise Airplay and Blue tooth speakers that seem OK it is only the USB Companions that don't work.
Will look forward to a solution.
Thanks,
Rich

My iphone5 wont charge with usb port but works fine with wall plug... Infact computer. Doesn't recognizes the iphone

Battery not charging with usb port but works fine with wall plug.. So the prob is computer is not detecting the iphone5 . This problem started after upgrading to 6.1.3 version

Try to see what happens on another computer. If it works on another computer, the issue is not at the iPhone.

Airport Express used to work fine with Extreme, now doesn't

There are so many threads dealing with this, and a lot of alphanumeric references, but they seem to be with newer hardware. Here's my situation:
I'm using an older (4 years?) Airport Extreme Base Station, with an older Airport Express that shows up as "6d156f". The Express used to work just fine with the Extreme - plug it in, configure it, stream itunes just fine.
Now, the express continually flashes amber. I've done the reset numerous times to get it to show up in the Airport Admin Utility. I can go through the configuration steps, and when I get to the window to select the network I want it to join, everything seems fine. I select a password to protect the Express, but when I click "Continue", nothing happens. No activity from the Macbook running the configuration, nothing but a blinking amber light from the Express.
I re-installed the firmware update 6.3 with the Express connected via ethernet cable as some suggested. Didn't seem to do anything.
Of note, I had the same issue last week at a vacation rental, but was able to get the Express to work after a reset.
Sorry for the rambling, but I'm in a fog about this now.
Thanks in advance for any wisdom.

Temporarily connect your Mac to the AirPort Express with an Ethernet cable, and then, try to access it with the AirPort Utility again.

When streaming using apple tv i have no volume on the tv although it works fine with audio

when using apple tv i have no volume on the tv although it works fine with audio

Home Sharing streams music from iTunes on a Mac or PC to Apple TV, an iPad, iPhone, etc.
The source for Home Sharing is not an iPad.
See: http://support.apple.com/kb/ht4557

Report works fine in VS2010 but simply doesn't show when published

Problem:
Crystal Report works fine in VS 2010 but doesn't show when published to web-server, there is no error, it simply doesn't show.
Background:
Installed VS2010 on a freshly installed and fully updated (.net 4.0 is included in the updates) windows server 2003 box with production release Crystal Report 2010. Nothing else is on the server. IIS 6 is running. My web-server and VS2010 is on the same box.
I went ahead and created a new asp.net 4.0 web project called webapplication1. Thereafter, i put a few controls (text-boxes, list-boxes and so on) on the default.aspx page. Then i created a report.aspx page. This page will have the crystal report viewer on it. I went ahead and set the report up without much hassle (got how-to's from the internet). I successfully tested my web app with the built-in testing server, the beautiful crystal report presented exactly what i asked it to. There was one recurring "Sys.Application is null or not an object" hiccup that occured every time during testing when i navigated from the default.aspx page to the report.aspx page (the page the report is on). Clicking ignore or continue on the dialogue box that comes up because of the hiccup will allow testing to continue. Here's a screen-shot of this recurring hiccup.
http://i440.photobucket.com/albums/qq122/ricom_19/Testing-Error.jpg
As i've shown, testing went great, except for the hiccup. I now moved to setup a publish profile. Since my web-server and VS2010 is on the same box this seemed relatively straight forward. All the files went over except the report, i.e. crystalreport1.rpt file. I solved this by setting the build action to 'Content' in the CrystalReport1.rpt properties. I did a republish. Now i have all my files, see screenshot: [http://i440.photobucket.com/albums/qq122/ricom_19/Application-Home-Directory.jpg], on the web-server.
I proceeded to try to browse to my app from another computer on my network. This was successful until i tried to navigate to the report.aspx page that the crystal report is on. The the report.aspx page loaded but the crystal report was simply not on it. No errors, not even the hiccup from testing occured. Its as if the crystal report viewer was never on the page to begin with. Only when i right clicked on the page and 'view source' did i see some remnants of the crystal report viewer.
Here is the Report.aspx page when tested in VS2010:
[http://i440.photobucket.com/albums/qq122/ricom_19/successful-Test.jpg|http://i440.photobucket.com/albums/qq122/ricom_19/successful-Test.jpg]
Here is the Report.aspx page when published to the web-server and browsed to from another computer on the network:
[http://i440.photobucket.com/albums/qq122/ricom_19/Reportviewer-Disappear.jpg|http://i440.photobucket.com/albums/qq122/ricom_19/Reportviewer-Disappear.jpg]
Details of adding report to my web app:
1) Populate my dataset then write the XML schema, reportschema.xml
2) Added the crystal Report to the project then used the wizard to navigate to the reportschema.xml. Of course i had to create new connection in Database expert. see screen-shot:
[http://i440.photobucket.com/albums/qq122/ricom_19/CR-Database-Expert.jpg|http://i440.photobucket.com/albums/qq122/ricom_19/CR-Database-Expert.jpg]
3) I formatted the report the way i wanted it
4) Added the Crystal report viewer on the Report.aspx page
5) In the code-behind of the Report.aspx page i bound the viewer to a report document that is loaded with CrystalReport1.rpt file
see screenshot: [http://i440.photobucket.com/albums/qq122/ricom_19/Report-Page-Code-behind.jpg]
That's it. As mentioned, it tested fine in VS2010 but the viewer doesn't show when i publish to the webserver. I wrote a crystal report in .net about 8 years ago. Things have changed soooo much since then.
I am wondering if its a license issue? Was also wondering if it had anything to do the testing hiccup, even though research is suggestion the two are unrelated.
I've described my actions as best as i could (without getting into ridiculous detail) and have included screen-shots of relevant stages of the process. Have a look and tell me your thoughts. Thanks.

The "Sys.Application is null or not an object" issue is known, submitted for a resolution and documented in KB #1528503. Unfortunately the KB search has been down the last couple of days...
However, the issue is limited to compile time and does not affect a completed application.
Re. the viewer missing. Sounds like the viewer directory did not get created or configure correctly. Before I get to that. You mention:
"I proceeded to try to browse to my app from another computer on my network."
This bring up the question: If you run the app right on the app server. e.g.; not a client computer, does the viewer and report come up? Is this issue isolated to client computers on the network?
I suspect that the issue exists irrespective of which computer you try to see the report from - but that is an assumption. If the assumption is correct, see [this|https://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/50aa68c0-82dd-2b10-42bf-e5502b45cd3a] article on configuring the viewer. The article does not have CR4VS2010 documented, but you should be able to guide your self using the article. I think the pattern will be obvious.
Ludek

HP Pavilion 15-p027ne, Audio working through headphones/earphones but not through speakers

HP Pavilion 15-p027ne:
Audio working through headphones/earphones but not through speakers.
I downgraded from windows 8.1 to Windows 7 (64-bit) and the problem is still not resolved.
Appreciate any troubleshooting tips.
Thanks.
- HP Pavilion User.

Hi there @donimuha
Welcome to the HP Support Forums! It is a great place to find the help you need, both from other users, HP experts and other support personnel.
I understand that you are getting sound from the headphones/earplugs but not from the system speakers. I am happy to assist you with this.
As the sound is working through the audio jack, I will assume for now that the audio driver is fine. Please check through the following page, which is very comprehensive. If you are still having a problem it is possibly a hardware issue with the speakers.
No Sound from the Speakers (Windows 7)
Let me know if that works for you.
Malygris1
I work on behalf of HP
Please click Accept as Solution if you feel my post solved your issue, it will help others find the solution.
Click Kudos Thumbs Up on the right to say “Thanks” for helping!

Audio works fine with "speakers" as default...doesn't work with spdif as defa

Similar Messages

Maybe you are looking for