Audio works great but the person I called couldn't...

Set up Skype for interview...I was able to call the person, the audio was great, I could see them but they couldn't see me...how do I fix this problem?

haruono wrote:
i lost my phone and i called it and it rang at first. but then, the next time i called this message came up.
I'm sorry but the person you called has a voicemail box that has not been setup yet...Goodbye.
i'm using at&t go phone and i really need to know what this means.
Very simple.
It means you never set up your voicemail.

Similar Messages

Phone works great but when on a call proximity sensor kicks in turns off the screen. When I pull the phone away from my head screen is still blank. The force hangup/lock is the only way to bring the screen back on

hi,
phone works great but when on a call proximity sensor kicks in turns off the screen. When I pull the phone away from my head screen is still blank. The force hangup/lock is the only way to bring the screen back on.
I purchaged it before one month onl. So i wont understand how it comes. Please help me. I am waiting for you reply.

"Your face is so ugly, it broke your phone!" Ha ha. Get it? How I was joking there? About your iPhone not working correctly after... <sigh>
But seriously, you said the situation only happens when you have been on a long call, so maybe the iPhone is just autolockng?

I have a Mac Book and purchased a Bose system that uses an antenna to play music from the the laptop - it works great, but the computer times out and shuts down - Help

have a Mac Book and purchased a Bose system that uses an antenna to play music from the the laptop - it works great, but the computer times out and shuts down - Help

Check in "System Preferences">"Energy Saver" to see if you have the "Computer Sleep" bar set too low.

When I make A call I can barely hear the ring or the voice on the other end, but the person i called can hear me ok

when I make a call I can barely hear the ring or the voice of the person on the other end, but they can hear me fine

iPhone Volume Controls
iPhone Sounds & Silence
ÇÇÇ

HT2513 ICal works great but the fonts are small and hard to read unlike Outlook. Any suggestions?

I have a MacPro and use ICal. I loke OUtlook because I can see it better and it is frankly more pleaseng to the eye. And the fonts are large enough. Of course, other than than Outlook is a nightmare on the lack of syncing etc...
I am resigned to using ICal but is there a way to change it's look? Or an emulation program that will use ICal but present it better on the screen?

Many of your points are totally legitimate.
This one, however, is not:
…To put it another way, the design of the site seems to be geared much more towards its regular users than those the site is supposedly trying to "help"…
The design and management of the forums for more than five years have driven literally dozens of the most valuable contributors and "regulars" away from the forums—permanently.
The only conclusion a prudent, reasonable person can draw from this state of affairs is that Adobe consciously and deliberately want to kill these forums by attrition—without a the PR hit they would otherwise take if they suddenly just shut them down.

Can't Video Chat, but Audio Works Great

Hey guys....I have been trying my hardest to get my IChat video feature up and running.
The audio works great when conferencing and obviously the im works fine. Myself and the person I am trying to video chat with both are using AIM through IChat. Here is the error message I am getting -
2009-04-06 13:53:14 -0400: No data has been received for the last 10 seconds.
Audio channel info: local machine using 192.168.1.3:16402, expecting remote machine to send to 173.66.213.133:16402
Video channel info: local machine using 192.168.1.3:16402, expecting remote machine to send to 173.66.213.133:16402
If I restart my IChat and send a video chat invitation I can initially see the person on the other end. But, the picture then freezes (almost instantly) and then I get the error message.
Any help would be very much appreciated. Thanks.

Hi,
Two possible things.
1) Go to System Preferences > Quicktime > Streaming tab and set the speed to 1.5Mbps and relaunch iChat so it "sees" the new speed.
2) Check your modem/router for any DoS (Denial of Service) or SPI (Stateful Packet Inspection) feature and turn it Off.
Examples
Netgears have either DOS or SPI in the WAN Page
Netopias have this Feature as part of the Firewall when you use a setting higher than Low.
Linksys tend to have the same in the firewall in the Security tab.
Basically they can be anywhere in the set up pages as the manufacturers never put them in the same place.
Both features examine incoming data to see if it is an attack.
In an iChat video chat so much data can be sent from higher speed processors over high speed inter net connections that it is regarded by DOS as a attack.
SPI tries to evaluate the validity of the data and tend to get overwhelmed (Simplified view).
192.168.1.3 looks more like an IP from a Linksys than the other two examples.
9:24 PM Monday; April 6, 2009

When I call someone using FaceTime from my mac, they can see me but no hear me. Is there something I need to do to make this happen? I also have an iPad 2 and FaceTime works great on it if I call somebody. Why no sound from my mac FaceTime using a mac pro

When I call someone using FaceTime from my mac, they can see me but not hear me. Is there something I need to do to make this happen? I also have an iPad 2 and FaceTime works great on it if I call somebody. Why no sound from my mac FaceTime using a mac pro and isight camera, mike combo.
If I use google it works. If I use Ichat, it works. If I use skype it works.

This sounds like something similar to https://discussions.apple.com/thread/3388112?start=105&tstart=0.
Try turning down the speak volume (System Preferences->Sound->Output->Output Volume) or the microphone gain (System Preferences->Sound->Input->Input Volume). Do this on both sides of the call.

Every time I try to use internet, the application(firefox/safari/chrome) stop working but when I use the modem on windows it works great. whats the problem?

every time I try to use internet, the application(firefox/safari/chrome) stop working but when I use the modem on windows it works great. whats the problem?

I just spoke with Tesco technical support (having been transferred to them by Clubcard support), who told me that the problems people are experiencing when visiting the Tesco site via Safari aren't currently being addressed because "not enough people have called to complain about it".
I asked what percentage of people he thought might make the effort to call instead of just giving up. He replied that he would be one of those who just gave up.
So it would seem that if we would like the problem to be resolved, we each need to take a few moments to CALL TESCO and ensure our complaint is logged by the technical support team.
Every voice helps

I bought a iphone 4s of ebay it works great but i want to use the passcode but can't because he can't remember what he put it as

i bought an iphone 4s of ebay and it works great but i went to set up a passcode but the person who had it before has put one on there and he can't remember what it is, is there anyway of resetting it

If You Are Locked Out Or Have Forgotten Your Passcode
iTunes 10 for Mac- Update and restore software on iPod, iPhone, or iPad
iPhone, iPad, iPod touch: Wrong passcode results in red disabled screen
iOS- Understanding passcodes
A Complete Guide to Recover Your iDevice if You Forget Your Passcode
If you cannot remember the passcode, you will need to restore your device using the computer with which you last synced it. This allows you to reset your passcode and resync the data from the device (or restore from a backup). If you restore on a different computer that was never synced with the device, you will be able to unlock the device for use and remove the passcode, but your data will not be present. Refer to Updating and restoring iPhone, iPad and iPod touch software.
Try restoring the iOS device if backing up and erasing all content and settings doesn't resolve the issue. Using iTunes to restore iOS devices is part of standard isolation troubleshooting. Restoring your device will delete all data and content, including songs, videos, contacts, photos, and calendar information, and will restore all settings to their factory condition.
Before restoring your iOS device, Apple recommends that you either sync with iTunes to transfer any purchases you have made, or back up new data (data acquired after your last sync). If you have movie rentals on the device, see iTunes Store movie rental usage rights in the United States before restoring.
Follow these steps to restore your device:
     1. Verify that you are using the latest version of iTunes before attempting to update.
     2. Connect your device to your computer.
     3. Select your iPhone, iPad, or iPod touch when it appears in iTunes under Devices.
     4. Select the Summary tab.
     5. Select the Restore option.
     6. When prompted to back up your settings before restoring, select the Back Up
         option (see in the image below). If you have just backed up the device, it is not
         necessary to create another.
     7. Select the Restore option when iTunes prompts you (as long as you've backed up,
         you should not have to worry about restoring your iOS device).
     8. When the restore process has completed, the device restarts and displays the Apple
         logo while starting up:
           After a restore, the iOS device displays the "Connect to iTunes" screen. For updating
          to iOS 5 or later, follow the steps in the iOS Setup Assistant. For earlier versions of
          iOS, keep your device connected until the "Connect to iTunes" screen goes away or
          you see "iPhone is activated."
     9. The final step is to restore your device from a previous backup.
If you can not restore your device then you will need to go to recovery mode.
Placing your device into recovery mode:
Follow these steps to place your iOS device into recovery mode. If your iOS device is already in recovery mode, you can proceed immediately to step 6.
     1. Disconnect the USB cable from the iPhone, iPad, or iPod touch, but leave the other end
         of the cable connected to your computer's USB port.
     2. Turn off the device: Press and hold the Sleep/Wake button for a few seconds until the
         red slider appears, then slide the slider. Wait for the device to turn off.
          If you cannot turn off the device using the slider, press and hold the Sleep/Wake
          and Home buttons at the same time. When the device turns off, release the Sleep/Wake
          and Home buttons.
     3. While pressing and holding the Home button, reconnect the USB cable to the device.
         The device should turn on. Note: If you see the screen pictured below, let the device
         charge for at least ten minutes to ensure that the battery has some charge, and then
         start with step 2 again.
     4. Continue holding the Home button until you see the "Connect to iTunes" screen.
         When this screen appears you can release the Home button.
     5. If necessary, open iTunes. You should see the following "recovery mode" alert:
     6. Use iTunes to restore the device.
If you don't see the "Connect to iTunes" screen, try these steps again. If you see the "Connect to iTunes" screen but the device does not appear in iTunes, see this article and its related links.
Additional Information:
Note: When using recovery mode, you can only restore the device. All user content on the device will be erased, but if you had previously synced with iTunes on this computer, you can restore from a previous backup. See this article for more information.

Could you help me with an app situation? We purchased several codes for Splashtop to install on our iPad 2's. It was working great but now that we upgraded the OS they have disappeared. The codes that we purchased are giving us an error that they have alr

Could you help me with an app situation? We purchased several codes for Splashtop to install on our iPad 2's. It was working great but now that we upgraded the OS they have disappeared. The codes that we purchased are giving us an error that they have already been used. So far it has only been 2 iPads.
Any solutions?

The compiler is highlighting the areas you got wrong, although the error messages are somewhat confusing.
Error 1: NSLog is a function and needs to be called as such, see e.g. the circleArea call on the line above. Functions are called using the function-name with its arguments in paratheses e.g. foo(12, 13).
Error 2: looks like a typo, defining a function is done as function-name(... <arguments> ...) { ... <body> ...}. In your code there is a ";" between the arguments and the body that should not be there, you probably copy pasted it from the forward declaration at the top of the source codde file.

I cannot send an email from my iPad 2? No problem receiving, why does this happen? Have tried the suggestions for setting up email and after doing the sync mail through iTunes receiving worked great but still cannot send? Any help would be great

I cannot send an email from my iPad 2? No problem receiving, why does this happen? Have tried the suggestions for setting up email and after doing the sync mail through iTunes receiving worked great but still cannot send? Any help would be great!

The fact that you can receive means you have a valid e mail address, and have established the connection to the incoming server, so all of that works. Since the send does not work, that means your outgoing server is rejecting whatever settings you used formthe outgoing set up. Try them again.
Google your particular isp, and ipad and many times you will find the exact settings needed for your isp. Or tell us here, and soneone else may be on the same isp. Some mail services need you to change a port, or have a unique name for the outgoing server.
Kep trying.

My iphone 6 connects to the car via bluetooth, the music works good, but the phone calles does not work. It looks like it is working but doesn't. I have tried in my Hyundai and a Dodge rent car and get the same results. I updated the last 8.0.2.

My iphone 6 connects to the car via bluetooth, the music works good, but the phone calls does not work. It looks like it is working but doesn't. I have tried in my Hyundai Sonata and a Dodge Dart rent car and get the same results. I updated the last 8.0.2. It worked the first day i had the phone, and then i updated to Ios 8.0.2 and it quit working.
Now when i get in the car, it acts like it is connected and makes the same call it was on after syncing to bluetooth, but it really isn't on a call. This is happening on both cars.
Does anyone know if this is the phone and i need to take it to Apple or if there is an issue that Apple is working on getting a fix for?
My son in law has the exact same phone as me, we both got the on 10/6, he had a Dodge Dart and his is working via bluetooth.
Someone HELP please, as i consider this a safety issue by not having my calls go to bluetooth.

We had the same problem, but figure out the solution.
You MUST have at least 1 song added to your ITUNE! After you add a free song, then everything else should work as normal!
Hope this helps!

HT201272 I have tried several ways to transfer my itunes library and Playlists to a new computer. I get the music library but not the playlists. Can you advise? 2nd I purchased 21 new tunes yesterday on the new computer worked great but when I made a disc

I have tried several ways to transfer my itunes library and Playlists to a new computer. I get the music library but not the playlists. Can you advise?
2nd > I purchased 21 new tunes yesterday on the new computer> worked great> but when I made a disc to transfer the playlist. I get the music but no album info just 1,2,3,etc. So I have signup both computers to share thinking that would work. But no to that also.
Please advise.
Thanks,
Bob

Copy the entire /Music/iTunes/ folder from old computer to new computer.
See this -> http://support.apple.com/kb/HT4527

Hello apple I have the problem with my iPhone and my friends have this problem too. My iPhone have the problem about calling and answer the call. When I use my iPhone to call I can't hear anything from my iPhone but the person that I call can answer it bu

Hello apple
I have the problem with my iPhone and my friends have this problem too.
My iPhone have the problem about calling and answer the call. When I use my iPhone to call I can't hear anything from my iPhone but the person that I call can answer it but when answer both of us can't hear anything and when I put my iPhone to my face the screen is still on and when I quit the phone application and open it again it will automatic call my recent call. And when my friends call me my iPhone didn't show anything even the missed call I'm only know that I missed the call from messages from carrier. Please check these problem I restored my iPhone for 4 time now in this week. I lived in Hatyai, Songkhla,Thailand and many people in my city have this problem.
Who have this problem??

Apple isnt here. this is a user based forum for technical questions. The solution is to restart, reset, and restore as new which is in the manual after that get it replaced for hard ware failure. if your within your one year warranty its replaced if it is out of the warranty then it is 199$

When sending video from my iphone to apple tv it says on screen it is doing it but it wont play on tv but audio works great

when sending video from my iphone to apple tv it says on screen it is doing it but it wont play on tv but audio works great

Welcome to the Apple Community.
Websites and third party Apps need enabling before they will allow AirPlay of Video content. Some Website/App developers have not enabled their products, some simply haven't got around to it yet, others have stated that they won't be enabling AirPlay (likely as a result of licensing issues).
I have created a User Tip to list Apps that have been tested with Video Airplay, if you have any Apps that you have tested please email me details and I'll add them to the User Tip.

Audio works great but the person I called couldn't...

Similar Messages

Maybe you are looking for