Audiobook license lost after resetting with pin my Zen V plus that was fro

i've had my zen v plus?3 mos. it has locked up about 6 times, and i reset with a paper clip in the small hole. this last time i had 5 netlibrary audiobooks on it. all licenses were ok, and i had listened to 2 of the books. after i reset after a lockup this time, the books were still there, but?i got the msg "no license to play..sync license from pc" on all of the books. all firmware and updates are current. why is it doing this?

Whoops--I fixed it...lol!!? I just reset it, and then held down the power & the play buttons at the same time and then cleaned it up, and rebooted it. I looked it up somewhere else on this forum, but thanks anyways guys!?

Similar Messages

HT4623 My sister has given me an old iPod touch 2 I think it is and after resetting the account info to mine the content was wiped and can not load any games now as it runs 3.1.3 and there all saying they need iOS 5 how can I update it to this

My sister has given me an old iPod touch 2 I think it is and after resetting the account info to mine the content was wiped and can not load any games now as it runs 3.1.3 and there all saying they need iOS 5 how can I update it to this

I suspect you have the original, 1G iPod touch. Those can only go as high as iOS 3.1.3,
If y ohave a 2G those can go as high as 4.2.1
Identifying iPod models
To update
The Settings>General>Software Update comes with iOS 5 and later.
Connect the iPod to your computer and update via iTunes as far as your iPod model allows
iOS: How to update your iPhone, iPad, or iPod touch
A 2G to 4.2.1. Requires iTunes version 10.X. If a Mac it requires OSX 10.5.8 or later.
To more easily find compatible apps:
iOSSearch - search the iTunes store for compatible apps.
Vintapps 3.1.3 - paid app.
Apple Club - filter apps by iOS version.

WRT54G IP lost after reset router

After reset my WRT54G router, I seem to cant find my IP address.is it because my firewall in my company is set to 192.168.1.1.before this, my WRT54G IP is set to 192.168.1.109.Is there any way to find the IP. I am using a desktop to configure the router,so no wireless connection.
forget to say, the wrt54G is not my PC default gateway, is it connected to the same switch same with my desktop PC.
Message Edited by nearownkira on 01-05-2009 05:30 PM

Who is your ISP ? What IP have you lost ? Could not understand your concern...Please explain in detail...

Deception with VIDEOS in Zen V Plus (Deceiv

En espa?ol:
Creative pretende que el ZEN V Plus sea el competidor directo del IPod Nano de Apple, y para mi humilde opini?n casi lo ha conseguido, supera en todo al Nano, pero falla en una cosa, LOS VIDEOS, la compresi?n y conversi?n es muy mala, el programa facilitado dobla el peso de los archivos, y solo soporta DIB de Microsoft. Este detalle le resta muchos puntos, y lo deja por debajo de su mayor competidor el NANO o cualquier otro MP4 mas barato de cualquier otra marca.
Consejo, mejoren este aspecto en alguna actualizaci?n futura, hagan que sea capaz de reproducir formatos MP4, Xvid, Wav, u otro archivo AVI mas com?n. Tambi?n podr?a ser bueno alg?n formato de M?vil (Mobile). O por lo menos una actualizaci?n del ?Creative vides Converter? que permita seleccionar la calidad, el tama?o, peso,? de los archivos a transformar.
Un usuario desilusionado y algo descontento por este detalle de GRAN IMPORTANCIA EN UN MP4, ya que para escuchar solamente m?sica me hubiera comprado un MP3, que espera que solucionen este problema lo antes posible.
Posdata: Digan en las caracter?sticas del producto que el formato que reproduce es el DIB, y no el AVI, o por lo menos especif?quelo, porque si lo hubiera sabido no me lo hubiera comprado. Me siento algo enga?ado y estafado.
Saludos.
In English:
Creative tries that ZEN V Plus is the direct competitor of the IPod Nano de Apple, and for my humble opinion almost has obtained it, surpasses in everything to the Nano, but it fails in a thing, THE VIDEOS, the compression and conversion is very bad, the facilitated program doubles the weight of the archi'ves, and single it supports DIB de Microsoft. This detail reduces many points to him, and it leaves below its greater competitor the NANO or any other cheap MP4 it but of of any other mark.
Advice, improves this aspect in some future update, causes that he is able to reproduce formats MP4, Xvid, Wav, or another file AVI commonest. Also some format of Moving body could be good (Mobile). Or at least an update of the ?Creative Converter grapevines? that allow to select the quality, the size, weight,? of the archi'ves to transform.
A disappointed user and something displeased by this detail of GREAT IMPORTANCE IN a MP4, since to only listen to music a MP3 had bought me, that hope that they solve this problem as rapidly as possible.
Subscript: Say in the characteristics of the product that the format that reproduces is DIB, and not the AVI, or at least it specifies it, because if had known to it to not me it had bought it. I feel something decei'ved and swindled.
My English is not very good, for that reason there am traducio with Google. Excuse to the failures and misspelling.
Greetings

Bueno, pues he estado probando varios formatos... Y al final el reproductor ha hecho lo que le ha salido de los webos. Te cuento
Prob? con un video de 200mb, algunos formatos consegu?an reducirlo hasta 90mb y se pod?a ver bien en el pc, con otros pesaba m?s. Pero siempre, al ir a meterlo en el reproductor, el convertidor hac?a lo que le sal?a de los cojones, con algunos formatos me pasaba de 200 a 300mb de peso, y algunas veces incluso de 90mb a 500!! 300mb m?s que el archivo original y 5 veces m?s que el archivo en otro formato! Sin embargo, con algunos archivos s? que consegu?a que me pesasen 0mb mas o menos pasando primero a formato Zen Vision.
Qu? he hecho: de momento he ido a la tienda y me han devuelto el dinero. Estoy esperando a que traigan los Zen V Plus de 4gb (200e) porque en esos caben mas v?deos, porque si te vas a un mp4 de 300e no bajan.

All pictures and videos lost after reset

hey,
i had to reset my ipad 3.
before that i made a Backup on itunes and iCloud.
after starting the ipad from backup, the apps, contacts etc appeared, but all my pictures ( imported and taken with the ipad, and all videos) are lost.
any usefull tips?
thank you!
mo

i also cant play one single song listed in the music app

Sowtware licenses lost after microSD replacement

Got my new E72 with preinstalled software along with T-Mobile 2-years abonement . Recently, I have changed my micro SD card into the larger one and copied there all the data from the old card. After that, licenses for all pre-installed programs including GPS have ben lost and now each program is asking to enter new unlock codes. Otherwise there is just a trial for 14 days. The problem is that when I've got my new phone, all the software has been already installed so I do not have any registration codes at hand. Tried to rename the card in the same way as previous one has been named but it did not help. Would appreciate to receive registration codes for all pre-istalled software on Nokia E72. Contacted T-Mobile support and they proposed to contact Nokia directly as they do not have any license codes.

Hi sveritchev
Welcome to the forum!
As a user-user forum we cannot assist you with this issue as you would need to use the "Contact us" link in your region.
For future reference did you enable "Show hidden & System files" on your PC prior to copying microSD which is essential?
Happy to have helped forum in a small way with a Support Ratio = 37.0

Nokia E66 saying lock code after resetting with=gr...

After respecting my Nokia E66, its saying lock cade, i tried 12345, 00000 but nothing, pliz help

Upon this S60 3rd Ed. FP1 device having carried out "hard reset", now try option to re-install existing device software using Nokia Suite upon PC.
Happy to have helped forum in a small way with a Support Ratio = 37.0

E75 messaging settings lost after backup with OVI ...

Every time after an automatic backup with OVI suite, E75 automatically changes the messaging memory (from memory card to phone memory).
After that, of course, e-mail notifications in display also disappears.
Please correct this error.

Every time after an automatic backup with OVI suite, E75 automatically changes the messaging memory (from memory card to phone memory).
After that, of course, e-mail notifications in display also disappears.
Please correct this error.

Sum lost after combine with similar request

Hi experts
I've used the 'combine with similar request' option to combine 2 reports that have exactly the same columns.
The only difference between them is that they're using different filters.
The combine action is done correctly but the The sum over the years is missing
When I run the 2 reports separatly for both of them the sum is shown in the report but when I combine them It's missing.
Any one can explain why??
Edited by: aharrab_be on Apr 30, 2009 10:32 AM

hi..
even in table view, go to fx of particular measure.. and
below you find option Aggregation Rule, set it to sum and try...
And it would be nice if you assigned points for correct answer.. ;)

All contacts lost after Syncing with Outlook (Windows)

Hi folks,
i had sorted out all of my wifes contacts on her iPhone. You know, all had proper phone numbers, street adresses, e-mail adresses and so on.
Than i wanted to sync them to my Outlook, but i didn't want some old Outlook contacts to get on the phone, so i removed all Outlook contacts from the contacts folder (made a backup, clever me).
Then i set the iPhone to sync contacts with outlook. iTunes asked if it's allright if more than 5% of my PC contacts are beeing changed, i clicked "Yes", figured the contacts on the phone are whats interesting to me, nevermind the contacts on the pc.
So here's what itunes did:
It copied two new contacts from the iphone which previously haven't been on the pc, to the pc and deleted all the rest from the iphone (except the two new).
Since the iPhone was my only source of the new and improved contacts, all my work that i have put in there (better part of three hours) is gone.
I am not sure if i should shout, scream or just enter it all again with dignity...
Is there any way to restore the contacts? Or to prevent something like this from happening again?

Yep me too. Installed 10.2 onto my Windows 7 PC. Had no issues sycning with Windows Contacts previously, now I can't get them onto my iPhone 4 at all. Tried all the suggestion from Apple Support, still nothing.
Very unimpressed.

TS4036 all contacts lost after sync with icloud

I activated the icloud using my iphone 4s. Suddenly all of my 1000s of contacts were gone. I hope they would still be there on my desktop (till recent sync). There were probably no contacts in my icloud and it wiped those on my cell. This should have been merge and icloud should have updated. Now should I turn off icloud and just sync my iphone.

Contact applecare. they have procedures for this.

PowerShell provider MSFT_ScriptResource failed to execute Test-TargetResource functionality with error message: The expression after '&' in a pipeline element produced an object that was not valid. It must result in a command name, a script block, or a C

I found this article, and used it, and it seems as though my script resource node items are being properly expanded, and honestly I think it passes through being loaded up, but then when I go to start it, it fails. so let me put up some links with code and
error messages for you all.
http://social.technet.microsoft.com/Forums/exchange/en-US/2eb97d67-f1fb-4857-8840-de9c4cb9cae0/dsc-configuration-data-for-script-resources
Ok, so here is my configuration. The idea is that I need some specific permissions set on a specific registry key on my sql servers. This is so I can do the SQL LowPriv monitoring. I'm just setting one key right now, premise is once this is working I can
then duplicate that for the remaining keys.
https://gist.github.com/jeffpatton1971/1bfb19a06782f0975f6e
When I paste that into the prompt it appears to be perfectly happy
https://gist.github.com/jeffpatton1971/3aeb568130988a460738
In fact, the resulting MOF file looks ok to me
https://gist.github.com/jeffpatton1971/a94858f0c1e9e5612f90
When I attempt to start the configuration on my local machine, which has the key this is what I get
https://gist.github.com/jeffpatton1971/82da888bb7aac31ef4ad
lol...well so it's a different error now, I removed a credential param that I wasn't using, so now i'm left with an & that I can't seem to find anywhere... at any rate...so now my issue has become where is the bad &?I'm going back to the internets
to see if there is something akin to this error, and i'm open to any questions the most pressing one is why are my scriptblocks all smooshed together? well, early on I was wondering if random whitespace and extra characters were mucking up the waters. I may
actually dial down the script and see if I can add things until I get the error as well.
Jeffrey S. Patton Jeffrey S. Patton Systems Specialist, Enterprise Systems University of Kansas 1001 Sunnyside Ave. Lawrence, KS. 66045 (785) 864-0242 | http://patton-tech.com

I looked at the first link, and it looks like you might be missing quotes around the $Node.ActionAccount part of the comparison, which would cause the script block creation to fail. Maybe change the sections that look like this:
Where-Object {$_.IdentityReference -eq $Node.ActionAccount}
to this:
Where-Object {$_.IdentityReference -eq '$Node.ActionAccount'}
If you're looking to do permission changes with DSC, I'm actually looking for testers for my
PowerShellAccessControl module. The 3.0 beta has two DSC resoruces: cAccessControlEntry (lets you make sure an ACE is present or absent) and cSecurityDescriptor (lets you specify an SDDL string for an object). The current cSecurityDescriptor is going to
be called cSecurityDescriptorSddl in a future release, and a new cSecurityDescriptor is going to be added that lets you control the different sections without using SDDL. If you were to use it, I think you could change your configuration to the following (at
least for the permission part):
Configuration SQLLowPrivRegistry {
param(
[string[]] $ComputerName = "localhost"
Import-DscResource -Module PowerShellAccessControl
Node $ComputerName {
cAccessControlEntry TopLevelActionAccountPermissions {
Ensure = "Present"
Path = "HKLM:\Software\Microsoft\Microsoft SQL Server\"
ObjectType = "RegistryKey"
AceType = "AccessAllowed"
AccessMask = ([System.Security.AccessControl.RegistryRights]::ReadKey)
Principal = "DOMAIN\SqlDefaultAction_sa"
What you're doing should work just fine, so I'm not saying you need to use mine. If you do get a chance to look at it, though, please let me know what you think (or if it even works). There are two scripts in the examples folder of the module that demo more
with the two resources (hopefully that will do until I finalize the documentation).

Plase Help - Issues with Charing my Zen Stone Plus

I am have this player initially i used to charge to 00% now its just charging upto 9% i keep for charging more than 8 hours still it happening the same. Updated the firmware to latest reset it twice i really don't know what to do. Please help me on this.
Thanks in Advance
Regards,
Shyam

kindly format your player in windows xp and scan it with avast antivirus software....... update the firmware after formatting...

HT2639 Can you resize after cropping in IPhoto affecting only the area that was resized?

Hello, I have resized an area of a photograph that has people in it. I want to enlarge the photo to get a better image of the people and their faces. Any suggestions?
Thanks, Sally

As I am interested in preserving/enhancing the quality of the enlargement, does this require an additional app?
You cannot add information to an image, that is not there in the beginning, even with a more expensive application.
Try, to get as much as possible sharpness and definition into the cropped out section as possible, using iPhoto's adjustments in "Edit" mode. The most promising are the "Definition" slider (that will add clarity and definition, without adding too much contrast) and the "Sharpness" slider. Be careful with the "Contrast" slider. If the face was in the shadows, you could try the "Highlights" and "shadows" controls as well.

So will mirroring go back to normal with the new ios 6.1 that was just added?

I just updated my ipad 2 and iPhone 4
Will they've able to mirror to my tv like they did before when ios 5.1.1 was running, now that ios 6.1 instead ios 6.0.1

You should leave the current spelling of "in tack" intact. There was nothing wrong with it.

Audiobook license lost after resetting with pin my Zen V plus that was fro

Similar Messages

Maybe you are looking for