Audiobook playback does not remember position

I like to get audiobooks from the library and rip them to my ipod. I am very good about setting the "compilation", "remember position", and "skip when shuffling" flags to yes. I have never had a problem with my ipod. Now, on my iphone, it forgets where I was sometime after midnight, or the next day. During the same day, it remembers fine for example I like to listen while commuting. It remembers where I left off from the morning commute, but the next day, in the morning, I have to fast forward to the spot I left it at the day before. Please help.

I get CD books from the library. There are usually 10-15 in a typical unabridged novel. I put the CD in with the parameter to show CD only. I select ALL tracks, join them, and then import. After all CDs are on board, I have to edit the info for all of them, and this is where I set the remember position flag. I then have a Smart Playlist that looks for this title only, and for those tracks that have a playcount of zero. It works very nicely on my IPod. I can't figure why it loses position. This morning it was right where I left off.

Similar Messages

IPhone does not remember song or track or position in playlist or audio book

I am hoping Apple will fix a problem with Ios7.0.x where iPhone does not remember song or track or position in playlist or audio book. It worked fine with ios6.x

Hello SashMir,
After reviewing your post, I have located an article that can help in this situation. It contains steps to complete a restore on your device. You may want to consider a restore then setting up as "new," to alleviate the issues you've described:
iOS: Back up and restore your iOS device with iCloud or iTunes
http://support.apple.com/kb/HT1766
Thank you for contributing to Apple Support Communities.
Cheers,
BobbyD

I want to buy the new iPod Nano to play audiobooks. Does it remember the postion where switch-off took place and resume from there? Can one rewind and replay freely?

I want to buy the new iPod Nano to play audiobooks. Does it remember the postion where switch-off took place and resume from there? Can one rewind and replay freely?

1. Many thanks! I look forward to your revert on being able to freely rewind and replay with the 7th Gen iPod Nano.
2. Re resuming from the position where one left off - I meant after switch-off and not merely pause. Often, with audiobooks, I have to stop for the day, and resume maybe after 1-2 days. I'll be grateful if you can check this too
3. The above features make the iPod Classic a joy to use, but I have reservations about using it on walks because of its HDD.
4. Greatly appreciate the trouble you are taking. Best regards.

After reopening Firefox does not remember which desktop was used for each window. Can you help, please.

I'm using two displays and several desktops on my Mac (OS X 10.9.4).
When I need to restart Firefox, it remembers to open windows from last session in correct display, but does not remember which desktop was used for each window. So when the application starts, it opens all windows on a desktop which is currently active instead of reopening them on desktops used during the last session. How to fix the issue?

Hi Nerva,
Thank you for your question, there is a add on I have been recommended to custom set up of opening windows in new monitors. It's called [https://addons.mozilla.org/en-US/firefox/addon/monitor-master/ Monitor Master].
However, in regards to the session remembering which monitor the window was open in, in the profile folder there is a file that stores window positions and dimensions. It is called localstore.rdf.
Please stay tuned for more investigation, as there are definitely bugs on file for similar issues. Pinpointing it is the hard part.

Installed 4.0, but now does not remember my scroll history. Searched forum, but nothing helped. Now what?

After installing Firefox 4.0 this morning it does not remember my scroll position any longer. For example, I go to another page within a application and need to go back to the previous page where I left off to remind me of exactly where I was, but it always opens at the top instead of where I was at, so I have to scroll each and every page. I searched the forum, but nothing helped. I'm thinking of going back to an older version of Firefox, but I shouldn't have to lose out on new feature's. VERY frustrating!!!

ToddMusic wrote:
note: I also "dusted" the inside of the mac very carefully and lightly with a barely damp rag.....
Are my Hard Drives safe in there?
Any ideas out there? Thanks in advance to your advice, T
Ouch! That was not the way to get dust out. Running that damp rag anywhere near an electronic component, even if you were wearing a properly grounded writs strap, was way dangerous.
Did you lay the machine on its left side when you replaced the RAM? That is much safer (though the recommendation only shows up in the service documentation, not the user guide, for some reason).
What I would do at this point is to remove all RAM and try to power the machine. If other stuff is OK, you won't start but you will see the lunar LED flashing in a repetitive pattern above the power switch. If you don't see that happening, then things are exceptionally serious.

Safari does not remember my user IDs

Safari does not remember my user IDs for logging in on web pages on my iPad. I have all the setting with no luck. HELP

gladihaveamac wrote:
Yes. I've tried that several times and still no opening page.
And you're positive you have it set up properly?
Sounds just like the issue in this thread which was resolved by proper setup:
https://discussions.apple.com/message/15697274#15697274

Firefox 7.0.1 does not remember/fill in username and password in Mac version although on Windows it works, so it's not the website preventing password being saved. what is up and how can this be fixed ?

There are several sites where I now have to type in my username and password each time I return, such as turnitin.com. (I'm a teacher and use this for grading). Friefox used to be able to remember this for that site and it still works at my office where I have a windows machine. Not working on my Mac OS 10.6.8 and it is really annoying to have to retype every single time; it's not a financial site or anything so why can't the Firefox browser remember and re enter my info?
And no, turnitin does not currently support Firefox 7 but it is only up to firefox 4 and up until now firefox at least worked to remember passwords.
I looked at http://support.mozilla.com/en-US/kb/Username%20and%20password%20not%20remembered and I have checked all the recommended browser settings and am not set to private browsing; the sites where this happens are not set in exceptions to remembering, and they are not set to be cleared automatically
So, what's up and why doesn't Firefox remember passwords and usernames any longer?

Now up to Firefox 8 and the problem persists. Cannot go to the www.turnitin.com page and login as I used to do -- Firefox does not remember my username or password.
Still works on Windows, and with other browsers... It would be great if a fix is available.

My dad has dementia - does not remember his password. His hard drive has been erased. We need to reload Mountain Lion and can't figure out how to do it.

My dad has dementia - does not remember his password. His hard drive has been erased. We need to reload Mountain Lion and can't figure out how to do it. Internet recovery asks for his Apple ID and password. He has no idea. I have an Apple ID but have never bought anything through the iTunes store so it won't accept my Apple ID. I don't know if his computer is under warranty. He does not remember if he has Applecare. I tried reinstalling Leopard -- the computer originally came with Leopard -- but the computer screen goes grey and a message comes up saying I need to restart. He wants to give this computer to me since it's useless to him. What do I do to get a system on it again?

You will need to reformat the hard drive to go back to Snow Leopard or Leopard.
Does he have a Snow Leopard Disk? He should, as there is no way to go from Leopard to Mountain Lion without it. If you can find the Snow Leopard Disk, I'd at least start with that.
You will need to use Disk Utility in the installer to format the hard drive and get rid of the recovery partition.
Boot from the installer disk by holding down the C key on restart. When it boots, Open Disk Utility (Utilities menu, at least in Snow Leopard).
Select the Hard drive and then click the Partition tab.
Select 1 Partition from the partition menu.
Select Mac OS Extended (Journaled) as the format.
Name the drive (Macintosh HD is the standard).
Click Apply to partition the drive.
When it is done, quit Disk Utility and install the OS.

My iphone 5 does not remember the password of my home network. Well this is ot the case with my ipad. The wifi gets disconnected every 2 minutes. Its not any problem with my wifi router as my ipad and other devices work fine. So how do i fix this problem?

Well my iphone 5 does not remember my home network. This is not a problem with the wifi router as the ipad works absolutely fine. The wifi loses it connection in just 2 minutes. So could you please fix this problem.

Not unless the modem is causing a problem.
What you want to do is get it to work reliably over Ethernet first, then tackle wifi. Power off the modem. On your macbook, delete the Ethernet configuration and the Wifi configuration. Power up the modem, then connect the mac via Ethernet. Create the new Ethernet configuration and see if you can connect.

Reader 9.3.2 does not remember last page visited for scanned pdfs

Using an old school PPC Mac, OSX 10.4.11. Reader 9.3.2 does not remember last page visited for scanned pdfs. It only remembers the last page visited for searchable pdfs, but not for scanned. I have the box checked in "Preferences: Restore last view settings..." I cannot upgrade Reader on this system, or my OS, so I'm stuck using what I have for now. I have to read huge documents for my work, that will include hand written notes in the margin and other marks on the page. The documents are hundreds of pages long, so it's a bit frustrating that it can't remember the page number for this type.
Are there any fixes for this? Something else I can try?

I tried to find the download for 9.5.5, but my OS is not in the list. I'm on a non-intel PPC mac. I tried finding that version on the web, but most of the links lead me back to Adobe, where it doesn't seem to want to be found. It obviously exists somewhere, but Adobe isn't making it easy to access!

Adobe form created in LiveCycle does not remember user input

Adobe form created in LiveCycle does not remember user input when the file has been re-opened after it has been saved.
Example:
"Check box" that has been selected and who have registered Action script (may be that it should be disabled), seems to be reset when the file is re-opened, although it apparently is checked.
Are there settings or script that can prevent this?

Hi there,
usually if the values are not kept in form after saving and re-opening the form, it would be because of your code... or because it is not Reader Extended PDF...
If your code has a function which is to return a value to your field without it to be working based on your Design, it will reset any data..(variables)
Which means...
e.g.: You have an array/var/JSONobject which you populate varying on the data entered in the design, as long as you are in the actual form, without closing and re-opening the form, it will keep all values inside that array / variables / JSONobject. But, once the form closed and re-opened, if you have a function that returns a value to your field, whatever the field, from any variable in the script it will return nothing because every variables are reset. To avoid such a thing, you must repopulate all variables that were assigned previously before closing the PDF Form. To do so, I recommend to have a page(hidden) which contains every important values according to that function and you must repopulate those variables according to the values in the keepVar page...
If you do not have any function that returns a value to a field based on your variables, this is not the solution you are looking for and I am not aware of the reason why it behaves like this... Maybe more information on the behaviour of your form would help locate the issue...
Hope this help

My Location/Search Bar has no memory. It does not remember what I type in.

My Location/Search Bar has no memory. It does not remember what I type in it when I am doing Google Searches. I have had this problem for over a week now.

I guess I would call it the "Google.com" Web Site. It is the horizontal bar/box in the middle of the screen (not at the top). Whenever I would do a Google Search, whatever name I typed in that box would stay there until I manually deleted it. Now, nothing stays in that box. Can you figure out why?

When I start ver 4 the first time 10 to 15 blank windows open and does not remember pin tabs?

When I open version 4 the first time, 10 to 15 blank windows open up. it does not remember any pinned tabs or go to my home page.

Make sure that you not run Firefox in [[Private Browsing]] mode.
In Private Browsing mode some menu items are disabled (grayed) and some features like visited links and others are disabled and not working.
You are in Private Browsing mode if you see "Tools > Stop Private Browsing".
See [[Private Browsing]] and http://kb.mozillazine.org/Issues_related_to_Private_Browsing
You enter Private Browsing mode if you select: Tools > Options > Privacy > History: Firefox will: "Never Remember History"
To see all History settings, choose: Tools > Options > Privacy, choose the setting '''Firefox will: Use custom settings for history'''
UnCheck: [[ ] "Automatically start Firefox in a private browsing session"
Another possibility is that there is a problem with the file [http://kb.mozillazine.org/sessionstore.js sessionstore.js] in the [http://kb.mozillazine.org/Profile_folder_-_Firefox Profile Folder]
Delete the files sessionstore.js and sessionstore.bak and any existing files sessionstore-##.js with a number in the left part of the name like sessionstore-1.js .
See http://kb.mozillazine.org/Session_Restore

LR3 does not remember last filter setting

When accessing image folders in the Library module, LR3 does not remember the filter settings that were in used during the last visit. This was a great feature in 2.*. Is there any way to restore this desirable behavior?

Excellent. I don't mind them dumbing things down for the "where did my files go?" crowd,so long as they leave us the option to do things the faster way.

Camileo S10 Camera does not remember the image-stabilizer setting

Hello Forum reader,
Is it normal that my Camileo S10 Camera does not remember the image-stabilizer setting?
I mostly use the 720px setting and stablilizer on, but after the camera is turned off the stabilizer is off again.
Greetzz.. Ben

Hi
This might be possible.
I remember that the focus does not work if the stabilization has been enabled
So maybe its an intention of the manufacturer that the stabilizer would be disabled again.
Greets

Audiobook playback does not remember position

Similar Messages

Maybe you are looking for