Audiobook stopped working - won't play anymore

I've been listening to an audiobook - downloaded from iTunes - on my iPhone.  This morning I went to listen to it and it wouldn't work.  The audiobook shows up, and it looks like it's playing, sort of.  That is, the pause button is showing, i.e., it's in play mode, but the seconds aren't ticking off.  I tried pushing pause/play numerous times, but nothing happens.  When I move the scrubber to the middle of a chapter, it does move, but when I then hit play, it moves back to either the beginning or end of the chapter.
This is only happening with the book I was in the middle of.  All other books and music play fine.
Any ideas on how to fix this?

I had the same problem but I was just able to resolve it. I had to remove the audiobooks from the iPhone and re-added it. See my reply on this thread:
https://discussions.apple.com/message/16875126#16875126

Similar Messages

  • Not able to open adobe XI Pro after I have filled out a documents and trying saving it. The program stops working & won't open up again.  Tried to complete a repair, rebooting nothing works. Help please.

    Not able to open adobe XI Pro after I have filled out a documents and trying saving it. The program stops working & won't open up again.  Tried to complete a repair, rebooting nothing works. Help please.

    Hi,
    Can you pls. provide more details of the issue?
    OS/Platform
    It would be great if you can provide the MSI logs for repair from the %temp% directory.
    Thanks,

  • ITunes has stopped working.  Can play songs, but cannot access store.  What do I do?

    iTunes has stopped working.  Can play songs, but cannot access store.  What do I do?

    Hello there, Ellen317.
    The following Knowledge Base article provides some great in-depth steps for troubleshooting your issue. Start with the section titled Troubleshoot issues in Windows:
    Can't connect to the iTunes Store
    http://support.apple.com/kb/ts1368
    Thanks for reaching out to Apple Support Communities.
    Cheers,
    Pedro

  • My ipod nano just stopped working right after playing a song, any suggestions to get it back working?

    my ipod nano just stopped working right after playing a song, any suggestions to get it back working?

    Did the battery run out of power?  If not, try doing a Reset to "reboot" the iPod
    http://support.apple.com/kb/ht1320
    (A Reset does NOT erase the iPod.)

  • My I Phone 4s stopped working/ won't even turn on. What should I do?

    My I Phone 4s stopped working/ won't turn on. What should I do?

    Hello guyster1707
    If you are having issues wit your iPhone turning on, check out the articles below to get it to power back on and working again. It will walk you through checking the power adapter and cable.
    iOS: Not responding or does not turn on
    http://support.apple.com/kb/TS3281
    iPhone and iPod touch: Charging the battery
    http://support.apple.com/kb/HT1476
    Regards,
    -Norm G.

  • Please help! My old movies won't play anymore.

    Hello,
    I have a bunch of old movies from my old phone downloaded in iphoto. Up until yesterday I was able to play these movies by simply clicking on them, but I just noticed that won't play anymore. I can still see the still frame of them, but they won't play in either iphoto or quicktime. My newer movies play fine. I'm pretty sure I have all new updates for iphoto and quicktime. Does anyone know how to fix this issue?
    Thanks!

    I'm having the same issue.  I just watched these videos only 2 weeks ago...

  • TS1424 I have downloaded an audiobook, but it won't play.  Any ideas?

    I have downloaded an audiobook, but it won't play.  Any ideas?

    on what device does it not play on?

  • I bought the movie "The Sky Crawlers" for 20 bucks, but halfway through the movie, it stoped. Now it won't play anymore!

    I bought the movie "The Sky Crawlers" for 20 bucks, but halfway through the movie, it stoped. Now it won't play anymore! I really want to watch that movie, it's cool, but I Can't watch it anymore! Help?

    The 3G iPod can only play SD video.  Are you trying to sync the HD version?

  • HT1657 Was watching a movie on my iPad2 and it just stopped, thought it was a low battery but even after charging itbto 100% the movie won't play anymore. It shows the movie chapters but says the movie content can't be played. Please advjise

    Was watching a movie on my iPad2 and the movie stopped playing, I thought it was because of a low battery but even after charging the battery to 100% it still won't play. I can bring up the movie & all the chapters but when I press play it says movie content can not be played. Please advise. Thanks!

    I am having almost the same problem, with the same OS, iTunes versions, and kids waiting to watch their favorite movie (Frozen).  I am (trying) to play the content on the computer, and hooked up to Vizio TV and external stereo.
    The video will display on the TV, but the audio will only play through the laptop. The movie will still play with both audio and video on the laptop.
    In researching this morning, it seems that i need to purchase a new TV and stereo that are HDCP "compliant" (NOT just compatible). Folks are also complaining that the same "won't play" issues directly on Mac hardware. 
    I could not find any current software workarounds or patches (Apple seems silent on this as a "problem").
    Upgrading hardware is insulting and (frankly) impossible.  Why should I get new hardware that works perfectly well? 
    I was going to get an Apple TV for Christmas, although not if new products cannot be used with my current hardware.   I would rather go back to all Microsoft hardware and software than constantly deal with troubleshooting Apple hardware and software.
    I'm going to uninstall iTunes v 12 and reinstall v 11 to see if that works.
    Please post if there is a solution!

  • HP MediaSmart DVD won't play anymore (HP HDX 16 laptop)

    Three days ago I used it to play a Blu Ray and it worked fine.  Now it won't play blu rays or dvds anymore.  What happens is when it opens and it says disc is ready to play,  it doesn't go any further than that.  When I hit the play button, the "reading disc" symbol pops up for a split second and goes away again. 
    I tried re-installing the program, even to an older version but still no luck.  I have the latest version too.  I also tried doing some critical windows updates and some optional ones.  Bad part is that my laptop is a few months past warranty so I'm not sure what to do next.  Any help would be greatly appreciated.

    Try doing a Windows restore point. Pick a date where you know the player was working.
     You will find it in the control panel under "Recovery"
     If that doesn't work there a number of things to try.

  • Macbook Pro wifi stops working, won't turn back on, requires restart to fix?

    So for the last two days my Macbook Pro's being doing something very strange. At random times, the wifi will just stop working (as in it thinks I have wifi but no webpages load anymore and my dropbox can't sync) and when I go to turn the wifi off and back on (in an effort to restart the chip thinking it would solve the issue), it won't turn back on. I go into the System Preferences, hit "turn wifi on" and nothing happens. I hit it about 10 times and that does absolutely nothing. I've then tried putting my mac to sleep and waking it back up, which delivers even stranger results; The wifi turns back on, but can't find any networks, both using scan and manually inputting the details of my network. So far the only fix for it is to just restart my Mac and then the wifi works just fine like nothing ever happened (until it happens again, usually a few hours later). I'm currently running OS X Mavericks 10.9.4 on a 15" early 2011 Macbook Pro (MC723LL/A) with 2.2 GHz quad-core i7 and a 1TB Samsung 840 EVO SSD. The most recent modifications I've made are just installing GDB debugger and creating a custom certificate for it to be able to run Eclipse C/C++ IDE on my Mac, but I seriously doubt that would have caused the issue (especially since that was running for a few days before this happened). Has anyone else had a problem like this?

    So many people are having this problem. I believe I have solved it. I posted it on another thread, but I will post it here:
    First - let me say that I tried trashing the bluetooth preferences and restarting. That worked for about 10 minutes, then I also tried reorder the connections in Network Preferences, that didn't do much either.
    Here's what worked: Open System Preference, click on "Energy Saver", uncheck "Wake for network access". This has totally worked for me. I connect flawlessly and immediately to my network and to my printer.
    My order of connectivity of network devices is still ordered where Bluetooth is near the last of the devices. But really, try deselecting "Wake for network access"

  • Photoshop Elements 8 stopped working, won't run even after reinstall

    I'm using Vista.  I installed a couple weeks ago and it's been working fine until today.  On startup I keep getting the message "Adobe Photoshop Elements 8.0 has stopped working.  A problem caused the program to stop working correctly.  Windows will close the program and notify you if a solution is available."  I worked my way through most of the troubleshooting guide and when I couldn't find the preferences file to rename I figured it might be "lost" and I should just uninstall and reinstall, but that didn't fix it, it still won't start.  I really need this program and it was a lot of money (for me).  Getting frustrated!  Anyone?

    I am having the same problem and tried calling tech support was on hold for an hour and a half its
    driving me crazy trying to figure it out.  Did an online chat which was no help what so ever.
    If I find out something I will let you know for sure...

  • Itunes stops working and wont play purchased tv shows, i tried the quicktime unchecking box fix and that didn't work. help

    im new here trying to get help.  my itunes stops working when trying to play tv shows and movies.  i tried the quick time fix, unchecking a tab in the advanced section that didn't work for me.  i have now uninstalled itunes that didn't work either.  help

    Try this. It worked for a few users after a drop.
    Turn the iPad over and give it a very HARD slap on the back. May take several slaps.
     Cheers, Tom

  • Purchased song won't play anymore on iPhone 4s

    I've only noticed it on one song so far but no matter what I do it won't play.  I can play it on my computer but not on my iPhone.  What can I do to make it work?

    I have the exact same problem.

  • DNG Converter suddenly stopped working, won't read NEF files

    Hi all, I'm new here, but am looking for some help.
    I currently am on a mac book and run photoshop CS3. I've been shooting with a nikon d700 in raw. When I upload the photos to my computer I've previously run them through the DNG converter without a problem. Now, for the past two days it has just stopped working. When I try to convert the NEF files, they are just greyed out, I can't select anything. I tried reinstalling the DNG converter, but still no luck.
    I never had any issues with it before, and now it suddenly won't read my files. Any ideas what could be wrong?
    Thank you!

    nfietz wrote:
    …When I upload the photos to my computer I've previously run them through the DNG converter without a problem…
    Had you run the DNG on a Mac before?  On the Mac, the DNG Converter works on folders only, not on individual files (unless you use the Finder to drop the icons of your raw files on the DNG Converter application icon).  From within the application, using File > Open, the icon and names of individual raw files will always appear grayed out.
    You need to target the folder that contains the files you want to convert.
    CAVEAT: all eligible files in the folder will be converted, including any and all DNG files that may already be contained in the folder.  So if you have any DNGs in that folder, they will also be converted again and the original DNGs may be overwritten.
    Wo Tai Lao Le
    我太老了
    Message was edited by: Tai Lao

Maybe you are looking for

  • Can not configure Oracle 10g form  on oracle 11g client

    Hi I need to install oracle 10g form in my system . Here is my system 1. OS --XP 2. 32 Bit 4. Already oracle 11g release client installed ( I think that create the problem ) I tried to install oracle 10g form , it installed but can cont configure net

  • Performance tuning in database side

    Hi All, I have a query which consumes 2 hours to run. Since, it is a vendor query, am not supposed to tune the query part. Response time needs to be reduced. So far, i have done the below analysis. 1) All the indexes are working fine 2) Cost is high

  • Communication channel

    My receiver communication channel was configured wrongly and so in CC monitoring it is showing red. After that I have corrected it and even I am able to receive the messages also. But in CC monitoring it is still showing red. Basically it is showing

  • Problems with MfE on a E61i

    I have a problem with one of my clients E61i. It was configured using MfE and was working fine until now. i have checked the security certificate. i have reset the phone and reconfigured MfE, i have removed MfE several times and installed it several

  • Why're there  3 ORACLE_HOMES in eBS R12?

    Hi I have a general question about the three Oracle Homes in e-BS R12. Why are they three, and what are they used for? Thanks