Audiobook trouble with iOS5
Is anyone else having trouble with audio books after upgrading to iOS5?
After upgrading my iPad 1 and iPhone 4, audio books (the ones I'm using are brought from iTunes) will no longer go from one audio file to the next as it should and used to do, so the book stops and you have to select then next file yourself.
Ive also notice when selecting an audiobook there is a 5-10 second delay before it will start playing.
Disable or turn off your firewall and anti-virus software and try the download again.
Stedman
Similar Messages
-
IPod Touch 4th Gen trouble with iOS5-iCloud
Hi,
I trying to set up my daughters 4th GEN iPod touch with iOS5 and get it talking to iCloud. I've got everytthing set up for her on our iMac, and see is "in the cloud" as far as the Mac is concerned. After downloading iOS5 and installing it, I'm going through the brief setup procedure to get the iPod talking to iCloud. Everyhting goes well until the very end when I get a window that says: "Could Not Sign In. Apple ID couldn't be created because of a server error" Is this just Apple getting crushed, or am I doing something wrong?Hi,
Yes, I have restored from Backup via i-Cloud. I've restored the iPod to factory settings. It seem like there is a driver issue. I installed iOS 5.01 and updated iTunes to 10.5.3.3 at about the same time. Win-Vista64, iTunes and iPod are all up to date. Apple Genius, at local Apple store was also perplexed. He suggested I ask the community. So, here I am.
It is strange that I can connect to other computers. But, the other computers have Win 7. Could this be a Vista64 driver issue? -
Trouble with ios5 software download
trying to download ios5 software in itunes for my ipad and iphone. download incomplete keep getting a network connection timed out error message, but wireless connection is fine. any ideas would be appreciated?
Disable or turn off your firewall and anti-virus software and try the download again.
Stedman -
Hello-
I recently updated my iTunes, and while doing so my iPod was connected. This prompted the iTunes to update my iPod touch operating system to 5. At this point, I lost ALL access to my iPod. I cannot re-sync my files to save my life. I have gone back and restored my iPod settings to a version as old as 3/2011. The iPod continually gets stuck on a -69 error that won't let it add any songs to the iPod. It is putting all the files (in light gray settings) on my iPod, but there is no data there. All of this from buying a cd on amazon and trying to download to my computer. Any suggestions would be GREATLY appreciated. Right now, I feel like sending apple a bill for the 10+ hours of trying to fix this **** $300 p.o.s. (at least that is what it is to me now . . .)Disable or turn off your firewall and anti-virus software and try the download again.
Stedman -
Iphone 4 with ios5 audiobook speed
I have an iPhone 4 and the speed on my audiobooks is very fast. I have looked for away to slow them down but I have nothing that will help me slow down the speed. I have uninstalled reinstalled them and turned the phone on and off and there is also nothing in my settings to change the speed. I have tried several things, any help would be appreciated!!
Same problem. iPad2 with iOS5, Windows 7 Pro 64b, Outlook 2010. I just want to sync the Contacts folder, but it doesn't appear in iTunes. All the other contact folders show up perfectly.
The workaround I managed was to create a "Backup Contacts", copy all the contacts in the primary folder to it and sync. Cumbersome procedure, because any changes have to be made in Outlook and then copied to the backup folder.
I tried syncing through iCloud, and it *****. Unusable with Outlook.
Any suggestions would be most appreciated. -
Since updating my iPad 1st gen to iOS5.0.1 videos don't get loaded properly into the Videos app.
On the Summary page in iTunes of my docked iPad, I have always checked the box for "Manually manage music and videos".
I have my reasons for doing it this way, but that's for another thread perhaps.
The problem is that when I load a video to my iPad this way - by simply just dragging it from the desktop and onto the iPad, under Devices in iTunes - it copies/updates, and shows up on the iPad like it always has before iOS5. But now, with iOS5, when I undock, it can't be found anywhere within the Videos app on the iPad. The only way I can find it is to do a Search, which seems to find it, but when I click it, a different video plays - the first video in the Movies list in the Video app. Dock the iPad again, yes the video is there, according to iTunes, but no way to play it once iPad is undocked.
My suspicion is that with iOS5 you are no longer able to use the "Manually manage music and videos (Mmm&v)" that you will be forced to run everything through iTunes - and probably iCloud. I've unchecked the Mmm&v box, and get prompted with "Are you sure? - All existing content on the iPad will be replaced with content from your iTunes library". READ - "Rebuild your entire video and music collection, and this time run it all through iTunes. Welcome to iOS5. Have a nice day or two wasting your time rebuilding your entire video and music collection. Don't fight it. Use iTunes for everything! Until we finally make iTunes a decent piece of digital media management software, then you'll have to do it all again."
Okay, rant over - Anyone out there with running iOS5 on a 1st gen iPad with the Mmm&v option checked and able to load a video manually (not through iTunes)? Any other thoughts?
ThanksYea, i managed to fix my issue in a wild fashion way But I DONT suggest it to anyone.
I like to hear why it happened after upgrading iTunes and if there is any peaceful solution.
Bythe way, here is how i fixed it :
1-i checked "manually manage music and videos" checkbox and clicked on "Sync" button
2-It showed a threating message that it will erase my music and videos ,......
3-I clicked on OK button and let iTunes do any thing she said , but the second it started to delete my treasures from my iphone, i disconnected my phone by pulling USB cable.
Now i have my musics and videos untouched and got that Option enabled again and i can manage my Music/Videos and Books manually. -
I am having trouble with mail, yahoo has started to have a problem sending, slow or not at all started before latest update, help
I noticed this at one point and what I did, which worked, was to delete the mailbox from my iPad, then reinstall it. Give it a try and see if it helps you as well.
-
IPad2 got a terrible trouble with 3G network after updateing to IOS5.1.1
Hello guys, I got a terrible trouble with 3G network after updateing to IOS 5.1.1. Now when I turn on my cellular data, the iPad 2 can say the carrier and 3G on the left top. But when I tap the Safari, it turns to be:"PDP authentication failure". I did the update to 5.1.1 last night, before that every thing is fine, and now I can't use my 3G at all.
Could anyone please tell me what's happing and what should I do???
Thank you so much!Hi Miky. After upgrading to ios 5.1 I had the same problem.
I reset the APN on network settings and rewriting the same. iPad now working on 3G.
My operator is 3 ITA
iPad 1 64 GB Wi-Fi + 3G -
Calendar alert issues with ios5
I am having trouble with getting audible calendar alerts on my iPhone 4 with ios5. Ever since I downloaded ios5 about 2 weeks ago, all I can get for alerts on my calendar appointments are vibrating alerts. I have gone to settings and selected an audible alert, but it still only vibrates at alert time. I am able to get audible alerts for text messages, and my "todo" list app, so I believe my volume is set at an appropriate level. Is anyne else experiencing htis, and have you found a solution?
Thanks for the suggestion, I wasn't sure if the default alert would have an impact, since I selected a specific alert time. However, I went into settings and tried to set the defailt time. Same result, I am still onyl getting a vibrating alert, with no audible tone.
-
As it says above, i have been having a lot f trouble with my ipod classic and the latest itunes update, i was unable to sync songs or anything to it and have tried every conceivable 'fix' i could find. i have run an itunes diagnostic and the results are posted below. a major problem is that when i try and view my ipod through my computer it displays nothing at all on the ipod, no files or anything, this may be the problem but i have no idea how it has happened or how i could resolve it.
This ipod holds huge sentimental value and i am loathe to buy a new one! If anybody can help it is greatly appreciated, than kyou in advanced.
Microsoft Windows 7 x64 Home Premium Edition Service Pack 1 (Build 7601)
ASUSTeK Computer Inc. K50IJ
iTunes 11.1.5.5
QuickTime not available
FairPlay 2.5.16
Apple Application Support 3.0.1
iPod Updater Library 11.1f5
CD Driver 2.2.3.0
CD Driver DLL 2.1.3.1
Apple Mobile Device 7.1.1.3
Apple Mobile Device Driver 1.64.0.0
Bonjour 3.0.0.10 (333.10)
Gracenote SDK 1.9.6.502
Gracenote MusicID 1.9.6.115
Gracenote Submit 1.9.6.143
Gracenote DSP 1.9.6.45
iTunes Serial Number 0038B8600B98D1E0
Current user is not an administrator.
The current local date and time is 2014-03-21 16:52:39.
iTunes is not running in safe mode.
WebKit accelerated compositing is enabled.
HDCP is not supported.
Core Media is supported.
Video Display Information
Intel Corporation, Mobile Intel(R) 4 Series Express Chipset Family
Intel Corporation, Mobile Intel(R) 4 Series Express Chipset Family
**** External Plug-ins Information ****
No external plug-ins installed.
Genius ID: 2fd81a1f13cf3ff25a8b4f0e8e725116
**** Device Connectivity Tests ****
iPodService 11.1.5.5 (x64) is currently running.
iTunesHelper 11.1.5.5 is currently running.
Apple Mobile Device service 3.3.0.0 is currently running.
Universal Serial Bus Controllers:
Intel(R) ICH9 Family USB Universal Host Controller - 2934. Device is working properly.
Intel(R) ICH9 Family USB Universal Host Controller - 2935. Device is working properly.
Intel(R) ICH9 Family USB Universal Host Controller - 2936. Device is working properly.
Intel(R) ICH9 Family USB Universal Host Controller - 2937. Device is working properly.
Intel(R) ICH9 Family USB Universal Host Controller - 2938. Device is working properly.
Intel(R) ICH9 Family USB Universal Host Controller - 2939. Device is working properly.
Intel(R) ICH9 Family USB2 Enhanced Host Controller - 293A. Device is working properly.
Intel(R) ICH9 Family USB2 Enhanced Host Controller - 293C. Device is working properly.
No FireWire (IEEE 1394) Host Controller found.Here is what worked for me:
My usb hub, being usb2, was too fast. I moved the wire to a usb port directory on my pc. That is a usb1 port which is slow enough to run your snyc. -
Trouble with Toshiba built-in webcam: "unable to enumerate USB device"
I am running archlinux on a Toshiba Satellite L70-B-12H laptop, and having troubles with the Webcam. *Once in a while*, everything goes well and I get
# lsusb
Bus 004 Device 002: ID 8087:8000 Intel Corp.
Bus 004 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 003 Device 004: ID 04f2:b448 Chicony Electronics Co., Ltd
Bus 003 Device 003: ID 8087:07dc Intel Corp.
Bus 003 Device 002: ID 8087:8008 Intel Corp.
Bus 003 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 002 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
# dmesg
[ 3433.456115] usb 3-1.3: new high-speed USB device number 4 using ehci-pci
[ 3433.781119] media: Linux media interface: v0.10
[ 3433.809842] Linux video capture interface: v2.00
[ 3433.826889] uvcvideo: Found UVC 1.00 device TOSHIBA Web Camera - HD (04f2:b448)
[ 3433.835893] input: TOSHIBA Web Camera - HD as /devices/pci0000:00/0000:00:1a.0/usb3/3-1/3-1.3/3-1.3:1.0/input/input15
[ 3433.835976] usbcore: registered new interface driver uvcvideo
[ 3433.835977] USB Video Class driver (1.1.1)
Unfortunately, *most of the time* the camera seems invisible to my system, and I get
# lsusb
Bus 004 Device 002: ID 8087:8000 Intel Corp.
Bus 004 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 003 Device 003: ID 8087:07dc Intel Corp.
Bus 003 Device 002: ID 8087:8008 Intel Corp.
Bus 003 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 002 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
(note the missing "04f2:b448 Chicony Electronics Co., Ltd" device), and
# dmesg
[ 480.104252] usb 3-1.3: new full-speed USB device number 4 using ehci-pci
[ 480.171097] usb 3-1.3: device descriptor read/64, error -32
[ 480.341235] usb 3-1.3: device descriptor read/64, error -32
[ 480.511375] usb 3-1.3: new full-speed USB device number 5 using ehci-pci
[ 480.578007] usb 3-1.3: device descriptor read/64, error -32
[ 480.748151] usb 3-1.3: device descriptor read/64, error -32
[ 480.918282] usb 3-1.3: new full-speed USB device number 6 using ehci-pci
[ 481.325196] usb 3-1.3: device not accepting address 6, error -32
[ 481.392091] usb 3-1.3: new full-speed USB device number 7 using ehci-pci
[ 481.798926] usb 3-1.3: device not accepting address 7, error -32
[ 481.799166] hub 3-1:1.0: unable to enumerate USB device on port 3
Searching on the web, most results I found lead to this page, where it is said that the problem is due to badly tuned overcurrent protection, and advocated that unplugging and switching off the computer for a little while gets things back into normal. This does not really work for me; the problem seems to occur more randomly, unfortunately with high probability (my camera is available after less than one boot out of ten).
I tried to ensure that the ehci-hcd module is loaded at boot with the ignore-oc option (with a file in /etc/module-load.d/), to no avail.
I also wrote a script which alternatively removes and reloads the ehci-pci driver until my device is found in lsusb. It is sometimes helpful, but usually not. And even when my device is found that way, it can only be used for a while before disappearing again.
Anyway, such a hack is unacceptable... So, my questions are:
is it indeed related to overcurrent protection ?
is there anything else I can try ?
should I file somewhere an other of the numerous bug reports about "unable to enumerate USB device" already existing ?
If of any importance, I am running linux 3.15.7, because at the time I installed my system, I couldn't get the hybrid graphic card Intel/AMD working under 3.16.
Last edited by $nake (2014-10-18 16:29:06)uname -a
Linux libra 3.9.4-1-ARCH #1 SMP PREEMPT Sat May 25 16:14:55 CEST 2013 x86_64 GNU/Linux
pacman -Qi linux
Name : linux
Version : 3.9.4-1
Description : The linux kernel and modules
Architecture : x86_64
URL : http://www.kernel.org/
Licences : GPL2
Groups : base
Provides : kernel26=3.9.4
Depends On : coreutils linux-firmware kmod mkinitcpio>=0.7
Optional Deps : crda: to set the correct wireless channels of your country
Required By : nvidia
Optional For : None
Conflicts With : kernel26
Replaces : kernel26
Installed Size : 65562.00 KiB
Packager : Tobias Powalowski <[email protected]>
Build Date : Sat 25 May 2013 16:28:17 CEST
Install Date : Sun 02 Jun 2013 15:30:35 CEST
Install Reason : Explicitly installed
Install Script : Yes
Validated By : Signature -
Hi, i am having trouble with my mac mail account, i cannot send or receive any emails because of the server connection problems. Message says it could not be connected to SMTP server. Thanks in advance for your help.
Hello Sue,
I have an iPad 3, iPad Mini and iPhone 5S and they are all sluggish on capitalisation using shift keys. I hope that Apple will solve the problem because it is driving me crazy.
I find using a Microsoft Surface and Windows 8 phone, which I also have, work as well as all the ios devices before the ios 7 upgrade.
It has something to do with the length of time that you need to hold the shift key down. The shift key needs to be held longer than the letter key for the capitalisation to work. For some reason, this is a major change in the way we have learnt to touch type on computers. I am having to relearn how to type!
Michael -
Trouble with OR in where clause
Hello,
I'm having trouble with execution speed. The problem seems to be with using OR in my where clause.
Here's the meat of the function where i_pledge_number is an input parm:
BEGIN
SELECT /*+ INDEX (pp) */ SUM(pp.prim_pledge_amount)
INTO return_amount
FROM
primary_pledge pp
WHERE
-- Get total if multiple allocations
pp.prim_pledge_number IN
(SELECT pc.pledge_number
FROM pledge_codes pc
WHERE pc.pledge_code_type = 'M'
AND pc.pledge_code = 'AC'
AND lpad(pc.pledge_comment,10,'0') = i_pledge_number)
-- Get total if single allocation
OR pp.prim_pledge_number = i_pledge_number;
RETURN return_amount;
END;
If I comment out either half of the OR statement (either the subquery or the pp.prim_pledge_number = i_pledge_number half) the function returns a value in .02 seconds. If I leave the OR in, it takes 2.764 seconds to execute?? Can someone please show me a better way (faster) to do this? I tried using nvl() around the subquery but couldn't get it to compile.
ThanksThese things are difficult to diagnose remotely, but here is something you can try....
SELECT */ SUM(pp.prim_pledge_amount)
INTO return_amount
FROM primary_pledge pp
WHERE pp.prim_pledge_number IN (SELECT pc.pledge_number
FROM pledge_codes pc
WHERE pc.pledge_code_type = 'M'
AND pc.pledge_code = 'AC'
AND lpad(pc.pledge_comment,10,'0') = i_pledge_number
UNION ALL
SELECT i_pledge_number FROM dual)
RETURN return_amount;
END;If that doesn't do anything (and it might well not) there are a large number of different ways we can recast this query. To save us further guessing please give us more details: execution plans, database version number, volumetrics.
Cheers, APC -
A trouble with "LIKE" in a select statement
Hi!
I'm having trouble with "LIKE" in a select statement...
With Access I can make the following and everything works well:
SELECT name, birthday
FROM client
WHERE birthday LIKE '*/02/*';
but if try to do it in my application (it uses Access), it doesn't work - I just can't understand that!!!
In my application the "month" is always the currently month taken from the "System". Look what I'm doing...
String query1 = "SELECT name, birthday " +
"FROM client " +
"WHERE birthday " +
"LIKE '*/" +
pMonth +
"/*' " +
"ORDER BY birthday ASC ";
ResultSet rs = statement1.executeQuery(consulta1);
boolean moreRecords = rs.next();
The variable "moreRecords" is always "false", the query returns nothing although the table "client" has records that attend the query.
Please, anyone can help me?! It's a little bit urgent.
Thanks,
Katia.Hi Katia,
I'll bet the problem lies with the characters you're using to escape the LIKE clause. You're using the ones that Access likes to see, but that's not necessarily what's built into the JDBC-ODBC driver class.
You can find out what the correct escape wildcard characters are from the java.sql.DatabaseMetaData.getSearchStringEscape() method. It'll tell you what to use in the LIKE clause.
I'm not 100% sure about your code. It doesn't use query1 anywhere. I'd do this:
String query = "SELECT name, birthday FROM client WHERE birthday LIKE ? ORDER BY birthday ASC";
PreparedStatement statement = connection.createStatement(query);
String escape = connection.getMetaData().getSearchStringEscape();
String test = escape + '/' + pMonth + '/' + escape;
statement.setString(1, test);
ResultSet rs = statement.executeQuery();
while (rs.hasNext())
// load your data into a data structure to pass back.
rs.close();
statement.close();Let me know if that works. - MOD -
Help needed I updated my ipad2 with iOS5 but few of my dashbaords (HTML5) are not working now ,can any one let me know how to downgrade the OS as we have a meeting coming up .. its urgent
Downgrading the iOS is not supported. If you are using Safari this try clearing its cache via Settings > Safari.
If that doesn't work then try closing Safari completely and then re-open it : from the home screen (i.e. not with Safari 'open' on-screen) double-click the home button to bring up the taskbar, then press and hold any of the apps on the taskbar for a couple of seconds or so until they start shaking, then press the '-' in the top left of the Safari app to close it, and touch any part of the screen above the taskbar so as to stop the shaking and close the taskbar.
A third option is a reset : press and hold both the sleep and home buttons for about 10 to 15 seconds (ignore the red slider), after which the Apple logo should appear - you won't lose any content, it's the iPad equivalent of a reboot.
Maybe you are looking for
-
I need help... I no longer have all of the buttons on my IPod touch screen. My grandson got a hold of it and boom.. The time and date is wrong also, and I have no access to fix this problem. There is no settings button. Any help would be apprecia
-
Questions about Adobe Muse CC single-app membership.
When speaking to adobe customer service reps about Adobe Muse I feel like their taking me around in circles. My annual membership to the current Adobe Muse is going to expire in June. So before I sign on for another year I had some basic questions th
-
Third party scenarios -- problem
Hi Gurus In third party scenario. The vendor supplies the material and if 1)by unfortunately goods get damaged before reaching to the client 2)client identified some of the materials are poor in quality. In these scenarios what is the business proc
-
I just installed the patch for chrome 36 ,, but videos on my project still do not work....
-
Adjustment Brush, External Editor and Export Version
hello, I am considering switching from lightroom to Aperture but I am having a major issue: I am working on .DNG files. I apply all the adjustments that I need, then either send the image to PSCS4 (I tried both tiff and PSD), or export it through the