Audiobooks are not displaying in numerical order on iphone. all mixed up.

audio book contents which are in order from 1 to whatever number in itunes are now displaying in different orders on iphone now. how do I fix this? they are already in the order I want in itunes but not on the iphone

I created a playlist (not a smart playlist) for the audiobooks I transfer to the iPod and they're STILL playing as if I had shuffle mode on. I've reported this as a bug, but who knows when Apple will get around to fixing it!
I was hoping someone would have come up with a workaround but nothing works.

Similar Messages

Document library items are not displaying in sorted order in sharepoint 2013

Hi,
I have a document library , I am storing document sets on it.
28326 items are there in the library.
I have configured sort on Name columns. Initially items are displaying in sorted order like (A,B,C,D,E...)
Now Items are not displaying in a sorted order it is displaying like (A, B,C,D,E,A,C...) like this.
Please help me on this sorting issue.
Thanks,
Samir

Are the documents displaying in your image inside the document sets? If so then your sets (folders) are displaying in alphabetical order and the documents inside the sets are displaying in alphabetical order. This is what i would expect.
Paul Stork SharePoint Server MVP
Principal Architect: Blue Chip Consulting Group
Blog: http://dontpapanic.com/blog
Twitter: Follow @pstork
Please remember to mark your question as "answered" if this solves your problem.

NB Type Planned orders are not Displayed in the Order Information System

Dear All
We have one material with Proc. type F.
We have entered a sales order for that item & run MRP ( MRP type PE)
No strategy is assigned to the material.
MRP has created a Plan Order which is of NB type & in MD04 it is showing SDEB against Plan Order.
Now we are not able to see this Plan Order in COOIS.
Although it is visible in MD04,MD16.
Can anyone tell me whether COOIS consider only those plan orders which are of E ( In house Prod ) category ?
How can we display that in COOIS ?
Abhishek Garg

Dear,
COOIS is used for production orders or planned orders olny and it will show u Order information relevent to "E" type procurement.
You can use ME5A

Pricing conditions are not displaying on purchsae order form

hi.
i am using zmedruck form,i am able to modify all and its printing properly,but pricing coditions at item level is not displaying ,if there is any solution for this let me know.
Thanks in advance.

yes u can write a subroutine in another program n call that from ur sapscript. u can pass the PO number from the script and use the logic accordingly in ur subroutine to get wat is required... u can refer the below example
In script program,
/:PERFORM GET_SBGRP_STEXT IN PROGRAM ZSDSCRIPT
/:USING &GV_MATNR&
/:CHANGING &GV_STEXT&
/:TABLES INPUT_TABLE
/: OUTPUT_TABLE
/:ENDPERFORM
In program ZSDSCRIPT,
form get_sbgrp_stext tables intab structure itcsy
outab structure itcsy.
DATA: LV_MATNR LIKE MARA-MATNR,
LV_TEXT(3) TYPE C VALUE 'ABC'.
clear intab.
read table intab with key name = 'GV_MATNR'.
if sy-subrc = 0.
lv_MATNR = intab-value.
ENDIF.
CLEAR OUTTAB.
READ TABLE OUTAB WITH KEY NAME = 'GV_STEXT'.
IF SY-SUBRC = 0.
OUTAB-VALUE = LV_TEXT.
modify outab index sy-tabix.
ENDIF.
endform.

Variables are not displaying in a order in a query

Hi friends,
I have 4 vaiables in my query.. i want to dispaly those variables in a particular order.. for example.. i want to display 1. Country , 2. State , 3. City , 4. Street.. like this order.. but my Query was displaying in a disorder.. for this.. with out changing the Query fields order.. how can i change the variables displaying order ..
can any one plz provide me the solution...
thanks
Babu

Hi
In Querry properties u can change the order according to ur requirement.
Thanks
Khaja

Target costs not displayed in process order

Hi,
We have set up a small PI scenario. The issue we are facing is that the target costs are not displayed in the order. Actual costs appear after confirmation, but target costs appear as zero.
We have maintianed cost relevancy in work centers, defined valid activity types, maintianed price in material master for all components and also run the standard cost estimate and released it.
Please let us know what we are missing and why this error could be happening?
Thanks in advance,
Ashok

Target costs are populated when you do the goods receipt. System will search for the released standard cost estimate and then apply that for each material component. If these 2 conditions are passed, then you will get target cost in order,
You need to define the following,
1. Variance Key - Transaction "OKV1"
2. Assign that to Plant using "OKVW"
3. Define Variance Variant using "OKVG"
4. Define Valuation variant for WIP/Scrap calculation using "SPRO"
5. Define target cost version by assiging sl no 3 & 4 and also how the cost calculation should be used.
Once this activities are completed, execute production/process order and then after goods movement and some confirmations process Variance using "KKS2" as a period end activities.
Edited by: sarin toms on Dec 2, 2008 2:26 PM

I'm on a windows laptop using iTunes sharing through the family to connect with Apple TV. After choosing the folder of photos to be shared and displayed on the appletv and when I choose to show on screen, they are not shown in the order they are in the or

I'm on a windows laptop using iTunes sharing through the family to connect with Apple TV.
After choosing the folder of photos to be shared and displayed on the appletv and when I choose to show on screen, they are not shown in the order they are in the original folder.
How to pair show in a certain order, for example, sorted by name.
grateful
Julio Cesar

Not that I'm aware of. You just export JPEG copies to a folder that you can point iTunes to. For instance, I have created a folder in my Pictures folder called Apple TV. And within that folder I have other folders of pictures that I can choose from in iTunes to share with Apple TV. But there doesn't seem to be any way to share a Lightroom slideshow. If you have laid to create a video file that would probably work. Apple TV is a little clunky in my opinion. Some things are a little more difficult to do now than they were a while back. I probably haven't provided you with much help, but just keep experimenting and I think you will figure it out.

Service order values posted to WBS, values are not displaying in CJii3

Hi,
We have posted thevalues from service order to wbs.
values are not displaying in cji3.
Regards,

Hi,
If the data has been successfully loaded into BPC, then it should be visible in BPC report.
You need to make sure that you are looking at the correct data region. Check in RSA1 and check which data region has the data. Maintain the same region in the report as well.
Hope this helps.

Permissions are not displaying correctly on Yosemite server

My file and folder permissions are not displaying correctly on my Yosemite server when viewed from a Yosemite client.
I have set these permissions from the server app on the server and have added local network groups for the appropriate folders on the share. When checked from the server's finder, everything looks correct. The server is setup for both AFP and SMB on file sharing. I have also tried setting permissions from the server's finder and seemed to make no difference.
When logged into from local or VPN Yosemite clients using AFP, the permissions do not show anything but postgres user and everyone group. Even though they should have network groups such as skoogfinancial, skoogmarketing, etc.
The server does seem to enforce the permissions correctly though a user cannot get into folders he does not have permissions for.
Therefore, it seems the server is enforcing correctly, but a user may not understand what is going on as the permissions list doesn't list anything meaningful.

Please read this whole message before doing anything.
This procedure is a diagnostic test. It’s unlikely to solve your problem. Don’t be disappointed when you find that nothing has changed after you complete it.
The purpose of this exercise is to determine whether the problem is caused by third-party system modifications that load automatically at startup or login. Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards. Boot in safe mode* and log in to the account with the problem. The instructions provided by Apple are as follows:
Be sure your Mac is shut down.
Press the power button.
Immediately after you hear the startup tone, hold the Shift key. The Shift key should be held as soon as possible after the startup tone, but not before the tone.
Release the Shift key when you see the gray Apple icon and the progress indicator (looks like a spinning gear).
*Note: If FileVault is enabled under OS X 10.7 or later, or if a firmware password is set, you can’t boot in safe mode.
Safe mode is much slower to boot and run than normal, and some things won’t work at all, including wireless networking on certain Macs.
The login screen appears even if you usually log in automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
Test while in safe mode. Same problem(s)?
After testing, reboot as usual (i.e., not in safe mode) and verify that you still have the problem. Post the results of the test.

Smartforms - Chinees characters are not displayed properly

Hi,
The chineese characters are not displayed propery when logged in EN in the logon screen, but we are able to see Chineese characters when logged in with ZH - chineese in the logon screen. This is happening for Sales order and Purchase order and for Japan also we fee see the same issue.
-Regards,
Ganesh Prasanna.T

Hi,
It is a printer issue. The printer needs to be configured to support the Chinese chanracter set.
Normally when we are able to view the chinese characters properly in the print preview but not properly displayed on the output it is surely a printer problem.
This kind of problem we faced many times.
Regards
Kiran Sure

Components are not displayed in COR6N

Hi experts,
Please help investigate this case:
We confirm process order using COR6N. In goods movement screen, only finished goods is displayed, all of its components are not.
Check material list in COR3, all components are marked "backflush". User could release process order as normal.
Could u suggest anything wrong in master data or process order itself that lead to this issue?
Many thanks,
Duc.

Back flush is ticked means definitely, it will show in Goods movement screen in C011n.
in earlier confirmation if you check the clear resrvation tick in Co11n, hen final issue tick will appear
please check in component overview, final issue is checked or not

Records are not displaying as expected.

Hi,
Records are not displaying as expected.
i designed an query as
SELECT '1. Emp Detail ' Details from dual
UNION ALL
SELECT empno||ename details dfrom emp
UNION ALL
SELECT '1. Dept Detail ' Details from dual
UNION ALL
SELECT deptno||dname details from dept
UNION ALL
SELECT '1. Location Detail ' Details from dual
SELECT locationcode||locationname details from location
The above query is displaying the data as follow
EMP Detail
Dept Detail
Location Details
John
Kathy
Prem
IT
Customer care
Boston
Texas
but i need to display the data as follows
EmpDetail
JOHN
Kathy
Prem
Dept Detail
IT
Customer care
Location Detail
Boston
Texas
Please help me on this.
Thanks,
Naz

Records are not displaying as expected.Well, it certainly displays as I'd expect it to. i.e. in an undetermined order.
If you want the output of a query to come out in a specific order then you must use an ORDER BY clause in your query, otherwise you are just querying a set of data and there is no order to it. You cannot assume that the order of the data will be the order in which you union your queries together, that's not how SQL works, as SQL is designed to work on sets of data, not on sequential rows.
So, in your example you would want something along the lines of:
select Details from (
SELECT 1 as ord, '1. Emp Detail ' Details from dual UNION ALL
SELECT 2, empno||ename details dfrom emp UNION ALL
SELECT 3, '1. Dept Detail ' Details from dual UNION ALL
SELECT 4, deptno||dname details from dept UNION ALL
SELECT 5, '1. Location Detail ' Details from dual UNION ALL
SELECT 6, locationcode||locationname details from location
order by ord, details

I have just updated to ISO 8 and my app icons are not displaying the correct icon but just a generic icon. Anyone had a similar problem?

I have just updated to ISO 8 and my app icons are not displaying the correct icon but just a generic icon. Anyone had a similar problem?

That happened to me for a short period of time after I updated. It didn't do it with all apps, but it did it with a few here and there. Try a few basic standard troubleshooting steps. Close all apps and reset the iPad.
In order to close apps, you have to drag the app up from the multitasking display. Double tap the home button and you will see apps lined up going left to right across the screen. Swipe to get to the app that you want to close and then swipe "up" on the app preview thumbnail to close it.
Reset the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider if it appears on the screen - let go of the buttons. Let the iPad start up.
You can also try resetting all settings. You will not lose any data, but most of the device settings will have to be entered in the settings app again. Settings>General>Reset>Reset all Settings.
Hopefully it will be something simple, but don't rule out restoring the iOS software, if nothing else works, but start with this easy stuff first.

Recently added album - photos are not correct date / time order

Hi,
I've noticed in the iOS8 'Recently Added' photo album that the pictures are not displaying in the proper order based on the date and time that the picture was taken.
They seem to be displaying based on upload time, meaning, the time they were uploaded to iCloud when the phone had a wifi connection.
My Wife and I share a photostream between phones, which means her photos may be uploaded at a different time than mine based on our wifi connection.
This causes the order of the pictures to be incorrect.
Has anyone else seen this and possibly know of a workaround?
This does not affect photo collections.
Thank you for your courage.

I never got an actual answer to this either. I searched all over the place but never found anything definitive...
I am guessing that recent photos now displaying photos based on upload time is the default / intended behavior... it would be nice if there was a way to make it display in chronological order again like the photostream did. In the meantime, collections is not affected by this at least.

Goods issue document is not displaying in production order

Hi Gurus, I am having problem That when I am doing goods issue in MB1A t code the document is posting but it is not displaying in production order.but when I am doing same goods issue in MIGO the document is displaying in Production order.when I am doing same goods issue in another plant with MB1A the document is showing.so where is the problem??is there any setting with plant and T code combination??what exactly is the error??why it is not showing in particular t code in particular plant.Please guide me.
Thanks in Advance.

Hi,
Check in transaction OPL8 for the combination of plant and order type..is the below indicator are activated or not...
Thanks
Kumar

Audiobooks are not displaying in numerical order on iphone. all mixed up.

Similar Messages

Maybe you are looking for