Audiogy - 1394 Port - DV video sync on rec

Hi all,
Input/Capture work fine.
When export/preview DV video to my DV (sony PC9 /Cannon MVX-350i) work fine.
The problem is:
When start record mode on the cameras, there are frames lost. ( sec recording, black signal, 2 sec recording and go on).
That only happened in record mode (previewing the DV-out in my cameras are fine)
History,
Use to work fine without any hardware changing.
Format and reinstall XP-pro and changed the port (after ones lost the DV-in recognition)
P4HT- 2.4GHz, 500MB RAM , 20MB HD,
SB Audiogy - 394port.
try it on other computer on the motherboard 394 port - work fine.
Any suggestions?
thanks

Hey Shwartz,
We run video on a separate computer with Pro Tools for a few reasons. One of them being it takes some of the processing load off of Logic, inducing less problems within the program for us. Another reason is that we can record demos directly into Pro Tools with video, so that we can screen them for clients all from the Pro Tools rig. Good for Pre Records too, many reasons.
To answer your questions...
1. It is the Pro Tools transport that is stuttering. Logic runs fine. The Pro Tools rig stutters and does the blue gray thing. The Pro Tools rig is receiving Midi Machine Control and Midi Time Code.
2. In Logic/Prefs/Midi/Sync under "Transmit Locate Commands When..."
"Pressing Stop Twice" is checked
"Dragging Objects" is checked
"Transmit Record Enable Commands For Audio Tracks" is NOT checked
3. I'll see if I can make this work, but they are quite a distance appart (through some sound booths etc...). I don't think it's the Logic computer, but it's worth a shot!
The only variable I see different is an LE Rig compared to a TDM Rig.
I'll let you know if I can find a gigantor midi cable to test it.
Any other ideas?
ETMi

Similar Messages

How to connect a DV camera through the IEEE 1394 port on my A50?

Hi
I have been trying to connect a video camera to my notebook SA50-109 throught the IEEE 1394 port.. but the notebook didn't recognize the camera at all..
although the camera shows 'DV-in' when i plug the cable witch is (4-pin to 4-pin) DV cable..
is there any thing I need to do before to make it work?
any ideas.. please?

Hi there. Your PC should recognize automatically the DV camera. It's OK to have the firewire (1394) connection shown under "network connections". Next to mine it says "connected" although the harddisk connected to it is switched off. Maybe there is something wrong with the cable? Or, another suggestion, try to restart the laptop while the camera is connected ... Not many further suggestions I'm afraid ... Good luck!

Qosmio G30: Sony MV cam doesn't work with IEEE 1394 port

Qosmio G30-117 doesn't support my Sony DCR-IP5E (a micro video cam) through ieee 1394 port. I have tried to use pinnaccle studio 9 and ulead video studio 10, but I couldn't see my cam through these programs.
There is no problem if I install a new win xp media center edition (retail pack) and the drivers from CDTOOLS. But I want to use my factory setup of Qosmio,I don't want to buy a new win xp media center edition.
How can I resolve this problem?
Thanks everybody.

Hi,
I had the same problem with my Sony-Handycam. It is not a problem of the Qosmio but of XP SP2 and the new driver for msdv.sys.
Workaround to bring this driver back to SP1 (please follow instructions strictly):
You need msdv.sys from a SP1. It may be on your computer, if it was installed with SP 1 before.
Otherwise, you have to get it from someone else.
Remove Camera from Device Manager, if it has been shown anytime (look also for hidden devices)
Reboot in secure mode (F8 while starting) and login as admin.
Navigate to \Windows\Driver Cache\i386. Find the file "driver.cab" and open it.
In the cab find "msdv.sys" and expand it to your desktop. The version must be less than 5.3.2600.2180.
(If you installed native XP with SP2, you have to use the file, you got from someone else instead)
Copy the files in this folders, if available:
Windows\system32\drivers
Windows\system32\dllcache
Windows\LastGood\System32\Drivers
(Maybe you want to rename the original files before)
Change to Windows\Driver Cache\i386 an search for sp2.cab.
Rename it to sp2.old and reboot.
Your camera should work now.
If not, change the file avc.sys in the same way. You will find it in sp1.cab or have to get it from someone else.
I solved the problem this way on my last notebook and on my qosmio.
greetings

X300 - IEEE 1394 Port

Hello-
I would like to transfer digital video files to my X300. I need to transfer the files via an IEEE 1394 cable but I believe my X300 only has USB ports. Can I transfer files with an adaptor or can I add a IEEE 1394 port to my laptop? Thanks.

Welcome to the forum!
That's a difficult to handle task since the X300 doesn't have any firewire port or an express card slot. To my knowledge there aren't any plain USB-2-FireWire adapters/converters available on the market and AFAIK the Lenovo enhanced port replicator, as most other third party USB based port replicators here too, also doesn't offer any firewire connectivity.
You have to search on the internet for any possible intermediate device, like maybe a possible USB-Firewire HUB (there is one available from Belkin, but that's primary for MAC Minis etc. since those have FireWire ports and so unusabel for you) or some sort of third party port replicator.
If there isn't any such HUB or replicator based device with a FireWire port available, you have to use another way (a detour) like storing your video files on some NAS (Network Attached Storage) or external HDD with a USB and Firewire ports and then transferring the files later from the NAS or external HDD etc. to your X300.
Hope this helps at least a little bit to clear up the very limited possibilities. Good luck!
ThinkPad T60/X32/600/770 · IBM IntelliStation · 3x IBM SpaceSaver II

IEEE 1394 port doesnt work

i purchase a model HP Compact 6510b with IEEE 1394 Port built in.I try to import my video from my sony DV camcoder to my laptop using 4 pin to 4 pin dv cable through IEEE 1394 port slot. The problem is .. my laptop doesnt detech my camcoder at all. Can anyone help me..please.

jkdawson1 wrote:
How can I determine if the ieee 1394 port on my Satellite A215-S4807 is a 4-pin or 6-pin? the specs don't reference that information.
Well, you can just count the pins, but I'm sure it's a 4-pin. See this illustration:
http://www.rainrecording.com/support/article?id=79

'Source play' and 'audio-video sync' problems with PE8 on fast WIN7 64 bit computer

I am transferring Hi8 videos, about 2 hours long, to my WIN7 64 bit computer with PE8. [Dell Mobile Precision M4400 Computer Workstation (Intel Core 2 Duo T9900 500GB/4GB); NVIDIA Quadro FX 770M, 512MB] I seem to have several problems:
First, after importing the file (.avi), I get a message about ‘dropped frames.’
Secondly, when I try to play the video in the source monitor, the audio plays but the video doesn’t; it only shows the first frame [this is after waiting until the video is ?recognized? ] I can use the shift-arrow key and see that the video is there.
Thirdly, I can play the .avi file in other players, e.g., avidemux or PE pro CS5 on another computer. There, I see that the audio and video are not in sync; the audio can be up to 300 ms ahead of the video (as determined using avidemux).
Questions:
1. Why doesn’t the source monitor play the video? Is this a problem with PE8 (latest update as of 3 March 2011) on aWIN7 64 bit computer (intel duo core. 3 GHz).
2. Is the audio-video sync problem the result of the ‘dropped frames?’ How can PE8 correct this? Avoid this? Or, is it coincidence?

"I think you're telling me you're using a backwards compatible Digital8 camcorder to capture your video as DV-AVIs. Is that right?" YES
"Are you using Premiere Elements to do this capturing?" YES, AS ABOVE PE8
"Go to the File menu and select Properties. It should show a standard DV codec being used for your video and audio."
WMP v12 is dumb. Under properties, media, it says 'video.' However, avidemux gave me the information state above: video -- Codec 4CC: dvsd, frame rate: 29.971 fps; audio -- codec: PCM, channels: Stereo, frequency: 48 kHz.
So, back to the Questions:
1. Why doesn’t the source monitor play the video? Is this a problem with PE8 (latest update as of 3 March 2011) on aWIN7 64 bit computer (intel duo core. 3 GHz).
2. Is the audio-video sync problem the result of the ‘dropped frames?’ How can PE8 correct this? Avoid this? Or, is it coincidence?

Audio/Video sync drift in Premiere CS5.5, but not in CS6

I have a QuickTime file with the following specs:
Video: H.264, 854x480, 29.99fps
Audio: AAC, 44100 Hz
When I open the file in QT player, or in Adobe Premiere CS6, there is no issue with Audio/Video sync.
However, when I import the file in Premiere CS 5.5, there is a drift in the Audio/Video sync.
Is there something I can do in Premiere CS 5.5 to avoid or fix the drift?
Thanks.

I had a similar problem and these are the steps I took to fix it.
First I deleted the files in "Adobe Premiere Pro Preview Files" for the project in question. I reopened Premiere and it appeared that deleting those files didn't seem to do anything as everything in the project looked the same.
I then disconnected the drive with the footage on it and opened Premiere. When it asked where the footage was, I told it to Offline All. I then went into Preferences > Media and hit Clean for the Media Cache Database. This had to be done because it only cleans the cache for files that are no longer connected with the project (as noted above). I closed and reopened the project, selected everything in the Project window, right clicked and chose Relink Media. I located one file and it relinked the rest automatically.
Now, finally, Premiere is re-conforming all the audio. Hooray!

Upgraded to iTunes 11. Now, I can not sync my music to my iPhone 4S (iOS 6.0.1) Apps, movies and videos sync OK. Music is the problem. Tags are correctly check-marked. Any ideas ???

Upgraded to iTunes 11. Now, I can not sync my music to my iPhone 4S (iOS 6.0.1). Apps, movies and videos sync OK. Music is the problem. Tags are correctly check-marked. NO ERROR MESSAGE THOUGH. Just a No Content in the Music App in the iPhone. Any ideas ???

Bump!

HT1386 I have Mac itunes and a touch 2G. My wife has Win7 and touch 4G (both iOS 4.2.1). She got a new iphone, I now have her touch 4G, and am trying to sync it to my Mac itunes. The music and videos sync, but apps & podcast will not. All checked to syn

I have Mac itunes and a touch 2G. My wife has Win7 and touch 4G (both iOS 4.2.1). She got a new iphone, I now have her touch 4G, and am trying to sync it to my Mac itunes. The music and videos sync to the 4G, but apps & podcast will not. All are checked to sync. During sync, it gets to "determining apps to sync" then immediately goes to "finished syncing". No apps or podcasts from my Mac itunes are on the touch 4G.

You can only sync to one iTunes library but you can manage music and videos among different computer/libraries.
It appears that you are trying to sync with a different library.
- If you want to make the Mac you syncing computer:
--- Connect the iPod to the computer and make a backup by:
iOS: How to back up
--- Restore the iPod from that backup. Note that synced media like apps and music are not in included in the backup.

Please help! Not able to set Video input Port(S-Video or Composite)on Linux

Hi
I am using JMF2.1.1e(Linux performance pack) for video capturing on Linux OS. I want to set video input port(S-Video or composite) through my application. I am using the following code:
     if ( dataSource != null )
          arrControls = dataSource.getControls ();
     if ( arrControls != null )
          nCount = arrControls.length;
     System.out.println("No. of Controls: " + nCount);
     for ( i = 0; i < nCount; i++ )
          if ( arrControls[i] == null )
               continue;
          if ( !(arrControls[i] instanceof Control) )
               continue;
          componentControl = ((Control)arrControls).getControlComponent ();
          System.out.println("ComponentControl : " + componentControl);
          if ( componentControl == null )
               continue;
But, i am getting No. of Controls: 0 (Zero). So i am not able to get any control component also. Rest of the application is working fine. Please help me solving this problem.
Thanks in advance.

To go a stage further.
Google run a Jabber server for their service.
Jabber apps (those that can) use a Protocol called Jingle to make the A/V connections.
Google's version is not even that compatible with other Jabber apps. (See Here)
The Plug-in in the Google Install (Or the Standalone Web Browser Plug-in allow Browsers to access the GoogleTalk A/V side as does the Standalone PC app called GoogleTalk as well.
iChat uses a process called SIP (Session Initiation Protocol) to connect to other iChat Users or to the AIM for PC app.
However this also works in any iChat to iChat Connection no matter if the Buddy List is an AIM Login based one, Jabber (including GoogleTalk) or A LAN based Bonjour Chat.
In you care this is not going to work.
Getting the Standalone (Intel only) Browser Plug-in and using the Chat option in the Google Mail Web page is probably the easiest option.
7:31 PM Friday; January 7, 2011
Please, if posting Logs, do not post any Log info after the line "Binary Images for iChat"

Old IMac 17'' video sync problem at boot

Hi,
A friend has brought his IMac 17'', which has a video sync problem. At boot, all screen lines are out of sync, but I can more or less recognize the apple logo, which disappears later. Something happens at least, there is a boot processing going on I think.
I tried to reset the parameter ram, it does not help.
I have heard of a power supply problem that can cause that problem. Is that right? The computer serial is: W8446APAPP7.
Can anyone help?
Thanks!
Philippe

Here's a simple test case I've made, it's just a bunch of lines drawn in an orthographic OpenGL view. When you scroll horizontially with scrollbars or by space+dragging, the effect is very noticeble.
The .app and source are available here:
http://www.johnpsimons.com/mac/TestApp.tgz
http://www.johnpsimons.com/mac/TestSource.tgz
I believe this is the same problem as with the Apple homepage Flash thing. It's not just a problem with Flash.

What conect minidisplay port to video

what conect minidisplay port to video input of the video mixin swicher

Sorry about that. I've ended up repeating everything you said in the beginning.
Some more digging reveals that it may not be Apples' fault and actually the video card companies whose components they use. Low End Mac has a good article on it (http://lowendmac.com/ed/fox/09ff/displayport-audio.html).
In any case it may be good to get the cable from MonoPrice (http://www.gizmodo.com.au/2009/03/monopricemini_displayporttohdmi_adaptor_handson_hd_itunes_now_plays_ontvs-2/) since it manages to strip the DRM out of the signal so for now you'll be able to watch movies unrestricted and hopefully one day get full support with it.

Does anyone know if the IPOD Nano touch 6th Generation have videos+syncing?

Hey guys my dad is gonna go to Dubai to get me an IPOD, and i need to tell him weather to get a 8gb or a 16gb, so if anyone knows if it has videos to preview.
Plus i need DETAILED STEPS on how to sync music-photos-podcasts etc. to the IPOD Nano Touch 6th generation. Please help me
Thank you

Hello Battouty,
And welcome to Apple Discussions!
Does anyone know if the IPOD Nano touch 6th Generation have videos+syncing?
No, you cannot sync videos to the 6G Nano.
For help on syncing all other types of content, see the iPod's *User Guide*. It should be able to answer most of your questions.
http://discussions.apple.com/category.jspa?categoryID=273
B-rock

"Manually Manage Videos" & "Sync Tones" at the same time?

So, I wan't to sync my ring and text tones manually to my iPad from iTunes as I have some tones that I did not buy from iTunes. I also want to "manually manage videos" synced to my iPad. However, it seems that iTunes will NOT let me choose both at the same time. Am I missing something? Why can't you do both at the same time? Are tones considered video (they have a .m4r extension)?
Thanks in advance.

While I appreciate the link, it doesn't exactly explain why you can't automatically sync Tones while manually managing videos. When you connect an iOS device (that also has iTunes Match enabled) to iTunes 11, the "Manually Manage..." checkbox does not say music as well. It only allows you to "Manually Manage Video", since music is syncing over the cloud via iTunes Match. Thusly, this link does not take into account iTunes Match.
For whatever reason, iTunes must see Tones as part of video, I guess.
But thanks anyways.
Message was edited by: pmpknetr21

Video Sync Problems in iTunes 11.1/ios 7

I have recently upgraded to ios 7 for my iPad and iPhone, and iTunes 11.1. I added two new videos to iTunes (.m4v format) and now when I try to sync with my iPad it seems to hang forever on "Waiting for changes to be applied" and then gives me an error message that the videos are not of a format that can be played on the iPad. This is odd since I already have .m4v videos on my iPad that play just fine. Moreover, I deselected some videos and they do not delete from my iPad as well. Is anyone else encountering this? I have seen some posting regarding music files and playlists not syncing, but nothing about movie files.

I've had video syncing problems (not with music though) when I updated my iPhone 4s to the new IOS 7, but I finally figured it out. What I did was I plugged my 4s in to my computer (Windows 7, 64-bit), then opened iTune (11.1.3.8), clicked on my iPhone tab on the upper right, under "Summary" put a 'check' in the Manually sync music & videos.
Looking at the picture above, notice the: Movies, Music Videos, and Home Videos; are now available. Before this method, these three wasn't there. These are all in the original Videos app for the iPhone. I hope this help you guys too.

Audiogy - 1394 Port - DV video sync on rec

Similar Messages

Maybe you are looking for