AudioHQ and Diagnostics prob

Hello,
I will tell you the entire story.
I've enjoyed my creative 5. speakerset for a long time, together with the OEM SbLi've 5. soundcard that I got at the same time. A week or so ago, my centerspeaker acted a bit strange, not producing any sound. (Not a hardware problem, tried switching speakers around, and if I put the original centerspeaker on a different port (front-right for instance) it works fine.)
I thought it might have been an issue with me switching back and forth from using 5. sound, and a headset. So I wanted to go into the AudioHQ to set things up like normal. However, no matter what I did, AudioHQ wouldn't start up. Tried booting in safe mode, and still it won't start up.
Ok, I thought might as well run the Creative Diagnostic program.
Started that up, and I ran a test (you could see more and more items getting listed, and each with a Green "V" tick behind it, showing that it works correctly), however before the test ended, Creative Diagnostics would just disappear, no error no nothing.
I ran it again, but this time I got an error: "Unable to load library", and I would have to reboot before I could start it up again, but the same thing would happen.
I've tried reinstalling the drivers, but that didn't work at all, same problems.
If anyone could help, that would be great.
P.S. I know it's an OEM soundcard, and if I download the drivers listed under Li've! I know they don't work (getting a "Creative Soundcard not detected" or something), but I'm positi've I've downloaded drivers from this message board that did work. If anyone could redirect me to those (since I can't find them anymore), I'm willing to try those out.

This is the JSP Forum, which may limit your responses.
The JSF forum is located at: http://forums.sun.com/forum.jspa?forumID=427

Similar Messages

Migrating from 11i to R12 - setup reports and diagnostics

Hi,
we are looking at migrating(not upgrading) from 11i to R12 and looking for setup scripts and diagnostics which can tell what org structure has been followed in 11i. Is anybody aware of such scripts and/or diagnostic programs provided by Oracle. We also want to find out the the volume of data etc in various primary tables. Do we have some kind of report for this too ? Any help would be highly appreciated.

983173 wrote:
Hi,
we are looking at migrating(not upgrading) from 11i to R12 and looking for setup scripts and diagnostics which can tell what org structure has been followed in 11i. Is anybody aware of such scripts and/or diagnostic programs provided by Oracle. We also want to find out the the volume of data etc in various primary tables. Do we have some kind of report for this too ? Any help would be highly appreciated.Do Not Compile EBS R12 Reports Using rwconverter.sh or Reports Builder from IDS 10gR2 [ID 786794.1]
Using the OracleAS 10.1.2 Forms and Reports Builders with Oracle Applications Release 12 [ID 444248.1]
Upgrade from 11i to R12 - Custom Forms,Reports and Workflows
Upgrade from 11i to R12 - Custom Forms,Reports and Workflows
Identifying Data Model Changes Between EBS 12.1.3 and Prior EBS Releases
https://blogs.oracle.com/stevenChan/entry/ebs_data_model_1213
EBS Seed Data Comparison Reports Now Available
https://blogs.oracle.com/stevenChan/entry/ebs_seed_data_comparison_reports
eTRM
http://etrm.oracle.com
Thanks,
Hussein

Flash Drive not mounting, shows up in sys. prof. and USB Prober

I have a 4Gig Flash Drive that doesn't mount. It shows up in both SYstem Profiler and USB Prober. Is there any way to "fix" it? I don't need to recover any files - I just want to be able to use it.
It used to work, maybe a year ago. Havn't touched it since.
The port is just fine, it's definitely the drive.
Thanks for your time!

it doesn't show up in disk utility. unless there is a way to force mount it, disk utility can't help.

Filenames in ufs_write and zfs_write probes?

I'm trying to find a way to get dtrace to capture filenames of files that are being written to in ufs or zfs filesystems. I don't want, for example, writes to device files.
I got the following from a post on the OpenSolaris forum (http://opensolaris.org/jive/thread.jspa?messageID=472665)
syscall::write:entry
self->filename = fds[arg0].fi_pathname;
printf ("Filename: %s\n", self->filename);
With this, however, I get all the /devices/psuedo/pts* with every shell command that gets executed. I've tried processing the self->filename variable with subsequent probes in order to narrow it down to what I'm looking for, but I keep running into various problems.
What would be really helpful if there was a way to grab filenames within the ufs_write and zfs_write probes instead of having to use the syscall::write probe. Does anybody know if there is a mechanism in the file system probes that is similar to the above example?

Thank you very much!!
The fsinfo provider is not documented on the the DTrace documentation wiki. Or, if it is, it's not on the front page with all the other providers. (http://wikis.sun.com/display/DTrace/Documentation) Not sure I would ever have stumbled across that on my own.
Playing around a bit I also found that:
args[0]->fi_dirname gives you the directory the write took place in
args[0]->fi_mount gives you the filesystem mountpoint the write took place in

License costs for Performance and Diagnostics packs

Does anyone have a reference to Oracle's 11G licensing structure that includes the list price for Oracle's Management Packs, specifically the Performance and Diagnostics packs?
This is what I have already:
Processor core factor table (very important depending on the hardware platform you are using)
http://www.oracle.com/corporate/contracts/library/processor-core-factor-table.pdf
Oracle License and Services Agreement V121809
http://oraclestore.oracle.com/OA_HTML/ibeCCtpSctDspRte.jsp?section=11365&media=os_local_license_agreement&minisite=10021&respid=22372&grp=STORE&language=US
Thank you in advance...

have you looked at
http://download.oracle.com/docs/cd/B19306_01/license.102/b14199/toc.htm
and
http://www.oracle.com/corporate/pricing/sig.pdf
http://www.oracle.com/corporate/pricing/eplext.pdf
http://www.oracle.com/corporate/pricing/technology-price-list.pdf
HTH -- Mark D Powell --

T400 thinkvantage system health and diagnostics reading memory speed as 667 not 1066

Hi, just got a T400 2765-T6U (fresh install win 7 IBM genuine install) on ebay and it is listed as having 3gb of DDR3 PC-3 8500 1066 ram. but when I run the thinkvantage system health and diagnostics program the scan says: memory DDR2 667 Mhz.
I am certain that the installed ram is DDR-3 8500 because I looked at it.
My concern is that for some reason even though the computer has the faster memory it is not running at the 1066 clock speed.
PS >I cant install any other software because I am returning it to the seller as it has a bad spot on the screen. He is offering a replacement but it will be an exact replacement so I really need to know why this reading is incorrect. I may ask for cash back.because of this reading. I dont understand why the thinkvantage system health and diagnostics is saying DDR2 667 Mhz and not DDR3 1066 Mhz (which IS installed)..
Is the Thinkvantage program giving me a false reading?
Is there anywhere else in the compuer OS that I can see the memory details and clock speed?
The Bios only shows the amout of Ram.
Thanks!

use HWinfo32 to check the ram speed.
Regards,
Jin Li
May this year, be the year of 'DO'!
I am a volunteer, and not a paid staff of Lenovo or Microsoft

HT6437 My itunes cannot locate my ipod. All the sync option are grayed out and diagnostics says that itunes cannot find usb ports and that no device is connected when it is. What should I do to solve this issue?

So itunes is giving me problems. Since around Christmas time, itunes decided to stop reading my ipod. I connect it to my computer with the usb cable and my computer will recognize that a device is connected but itunes will not. If I go to file->devices and try to sync, all of my sync options are grayed out, while before it would just automatically sync.
When I run diagnostics it tells me that under ports that it cannot find usb ports (it has a green circle?), a type of cable isn't found, and that no device is connected with the usb cable (which my ipod is). I have been trying to fix this issue but nothing is working. I've tried restarting my ipod, itunes, and my computer, i've also tried resetting my ipod and uninstalling itunes then reinstalling itunes but nothing seems to be working.
Does anyone know how to solve this issue?

Do the USB ports work for other devices?
Does the iPod charge?
See
iOS: Device not recognized in iTunes for Windows
- I would start with
Removing and reinstalling iTunes and other software components for Windows Vista, Windows 7, or Windows 8
However, after your remove the Apple software components also remove the iCloud Control Panel via Windows Programs and Features app in the Window Control Panel. Then reinstall all the Apple software components
- Then do the other actions of:
iOS: Device not recognized in iTunes for Windows
paying special attention to item #5
- New cable and different USB port
- Run this and see if the results help with determine the cause
iTunes for Windows: Device Sync Tests
Also see:
iPod not recognised by windows iTunes
Troubleshooting issues with iTunes for Windows updates
- Try on another computer to help determine if computer or iPod problem

I lost my CD - where can I get audioHQ and creative recorde

I have installed the drivers for my card, but when I try to install audioHQ or creative recorder it tells me I do not have a previous version installed. I have scoured the site and am unable to find what I need
I have installed:
AUD_EAX4DRV_0303.exe
AUD_WEBUP_PCWDRV_-84-40.exe
now trying to install:
CTREC2003090.exe
AHQ200307.exe
and it tells me for both that I need a previous version which I don't as I lost my disc in a move

Pinesol3,
Unfortunately you will need the CD to install those updates. A replacement CD can be ordered through us by contacting customer service directly.
There is the possibility that you will not need these programs. With the newest driver, there is a program called "CTpanel" that offers a majority of the options that Audio HQ does. It is located in c:\program files\creative\sb audigy\program\common\wdm\ typically and should have the config options you are looking for.
Jeremy

Erase and sync prob

okay so i put all my stuff from one computer to the new laptop long wait but did it and all the videos synced yet when i try to sync the last of the apps and songs it says erase and sync which it says it will erase exsisting stuff and replace it with the stuff in the library how do i fix this prob????

That is how it works when you switch computers. You end up have to erase the iPad and replace its contents with that on the new computer. That is why you have to move the stuff to the new computer before you sync. With manual syncing you can sync some items to a different computer and it sound like that is what you did. If you right click on your iPod in Itunes (left side) you see an option to backup. If you backup then you should be able to then restore from backup and then synce everthing to your iPod.

[GeForceFX] Problem updating drivers and playback probs

I have an NVidia FX5200 personal cinema and have constantly had problems udating drivers (crashes or b&w display) - last time I tried the system crashed and no amount of fiddling would allow me to go back so I had to re-install windows and ended up with new install of XP Pro SP2 on reformatted partition - this installed its own FX5200 MSoft driver (something like 5.6) but didn't install any software or capture drivers so I re-installed the drivers from the disk - this ioverwrote with 4.n version drivers. When I tried to update to the latest drivers using MSI live update my pc crashed on start as before with a blue screen message OX0000007E and I was unable to sort this out so ended up re-installing windows AGAIN and starting from scratch once more.
This time I thought I had it sorted and gradually updated the drivers dowloading and updating each of the 7 available and this time each one seemed stable... until I reached the latest 7772 when I got the same blue screen message - fortunately this time I was able to roll back to 6681, which unless 77 is essential, I'm jappy to stick with.
However I am having problems playing avis and mpeg files direct from my hard disk - they both stop briefly, sound stutters or they jerk when playing although they play fine if I burn them to cd and play from the dvd drive.
Any ideas about why I am not able to upgrade drivers successfully and any ideas about why I'm getting playback probs? All help appreciated.
Thanks
alad
System:
AMD 2600
512 ddr ram - 768 page file
WD 120g hdd (90g free and defragged)
Using 32 inch 100htz TV as monitor directly connected to vga card
Sound Trust C-Media driver 5.12.1.639
Installed
Jet audio
Power DVD 5
(tried personal cinema prog which came with card but removed it after problems with TV capture)
Tried installing
FFDshow codecs
latest XVid codecs
Reclock
- none made any difference
Rest of OX message: (OXC0000005; OX8054AF32; OXF89893EO; OXF8989)DC)

Hi Shrek
I just listed my first post. I bought a dell Dimension XPS T500 in 999. It used a CT4780 that fed a good Altec Lansing speaker system. When I built my present budget PC I used the old CT4780 card. Because I?am using XP Pro I loaded Li'veDri'veUni-Pack.exe driver (released 280203). This worked fine.
But I do not have the SPDIF working as yet. My MSI? MS-6533XG?Motherboard does have?header pins for SPDIF but?so far I haven't used them. I am looking for drivers to use if I can get the SPDIF connected.
Do you have any info?on my needs?
Thanks
Bailsburg

4472 DSA board and Proximity probe

I am trying to read output from the proximity probe using the PCI 4472 DSA board. For the grounded source(proximity probe) the connection given in the 4472 user manual(Page 2-7) is a pseudo-differential one.
The proximity probe(which i am sure is the industry norm) needs -24V power supply, so the +24V power supply is INVERTED to power the probe. The +24V lead become the COMMON and the GROUND lead becomes -24V.
The signal wire goes from 0 to -20V (Range) with respect to the COMMON(24V higher than the TRUE GROUND, since the power supply was inverted and +24V lead of the supply became COMMON for the probe).
According to the specs(signal ground and 4472 ground should not have potential diff. of more than 2.5V) and the pseudo-diff
erential configration I think it will blow the board as the 24V across the 50 ohm resistor will result in 0.5A of current.
Please help. Is there anyway out of this problem.
Thanks,
Vishal

Thanks for your answer Dan, one issue has certainly been taken care of, what is bothering me now is that the potential difference of 24V between the signal and board ground might hurt the board, NI specifies a max limit of 2.5V and certainly NI cannot make a board which is not compatible with the proximity probe(-24V power supply norm), since this board is meant to be used with proximity probes, accelerometers etc.
Looking forward to your reply.
Thanks,
Vishal

Airport extreme will only get or send e-mail messages, or allow Safari to function for about 5 minutes. After that it doesn't respond even though the green light is on and diagnostics says there is nothing wrong. Have to unplug again to get a response.

For the past 2 days Airport Extreme works for about 5 minutes and then will not receive or send e-mail messages, or let Safari work. The only way I can send or receive is to unplug Airport Extreme for a few seconds, reconnect and then work frantically for 5 minutes before it does the same thing. The green light stays on and the diagnostics tells me nothing is wrong even though no mail is moving.
Any ideas?
Thanks,
Greg
(I plugged my laptop directly into the modem in order to send this message.)

For the past 2 days Airport Extreme works for about 5 minutes and then will not receive or send e-mail messages, or let Safari work. The only way I can send or receive is to unplug Airport Extreme for a few seconds, reconnect and then work frantically for 5 minutes before it does the same thing. The green light stays on and the diagnostics tells me nothing is wrong even though no mail is moving.
Any ideas?
Thanks,
Greg
(I plugged my laptop directly into the modem in order to send this message.)

VLAN Mapping and Inline Probe

Hi there,
I'm trying to make all my traffic from SSL VPN clients flow through an Inline Traffic probe. From what I can see, I should use the VLAN mapping feature. But I can't figure out how the feature works. The documentation from ASA not very informative or extensive.
Currently my ASA has a Interconnect network on a VLAN to my Core router, and all my internal networks are routed to the Core IP address. My Core router's default gateway is the ASA. My ASA provides the IP addresses to the remote SSL VPN clients, and is the default router for them. Remote Traffic flows from the remote client to the ASA, then through the interconnect, to my internal networks. My single ASA is working as both my Edge firewall and the SSL VPN concentrator.
I undestand VLAN mapping will make all the traffic from remote clients to egress on a particular VLAN. So, I have created a new VLAN and added that to a trunk on the ASA. Then, I enabled the "Restrict Access to VLAN" and set it to my VLAN. My Inline Traffic probe is connected to the VLAN and can provide DHCP.
If this was a regular network, I would make the Inline Traffic probe the default gateway for that VLAN, and provide the IP and Gateway addresses with it's DHCP server. But how does it work with ASA? I can captive the egress to that VLAN, but can't figure out how to make the traffic pass through the monitor. As ASA does not support source-based routing I can't make the traffic next-hop to the Probe.
I can make the Probe bridge (L2) the interconnect network and the remote client VLAN. But the IP address of the ASA on the VLAN is not within the same range as the interconnect, so I can't understand if and how this would work.
Can someone help me with the configuration or explaing me better how VLAN mapping works?
Thanks.

What you are trying to achieve is configurable via the "tunneled" default route, and it would force all traffic from VPN through to this particular default route.
eg:
If your Inline traffic probe is between the ASA inside interface and your CORE, then you can configure:
route inside 0.0.0.0 0.0.0.0 tunneled
That would force all VPN traffic to route to CORE-IP which would go through your inline traffic probe
Here is the command reference for your info:
http://www.cisco.com/en/US/docs/security/asa/asa83/command/reference/qr.html#wp1840612
Hope that helps.

Re: Java Images and Threads prob Help!!

Without going through it in detail the problem may be that you're doing the repaint which you hope will draw the image before the image has completed loading.
Create your ImageIcon (loading the "xxxx.jpeg" files) during program initialisation. And check the load status of the icon, at least in a test version.

I still cant get the reqd output. Only the 1st image is dispayed and when i click the second code, the 2nd image doesnt come(the first one does not disappear, and even when i click the code 1 i have to minimize/ maximize the screen, to get the image and after that it does not go for the s2nd image 2 come!! )
Create your ImageIcon (loading the "xxxx.jpeg" files) during program >>initialisation. And check the load status of the icon, at least in a test version. How do u load the image during initialization??? and can ny1 plz tell me how to get the flashing threads with msgs????

Syncing calendar on Entourage with Macbook pro and itunes prob!

Hi there,
I have just spent an hour on the phone to apple then to Microsoft and neither solved my problem.
I have Entourage on my mac and have an IMAP account that is synced to my iphone 4. For some reason, I cannot sync my calendar on Entourage to my calendar on my iphone. When I create an event on my phone, it doesn't show in Entourage and vice versa. I've tried everything, deleting my sync history, clicking and unclicking the sync buttons in Entourage - still doesn't work. Also, when I deleted my sync history, my mail account disappeared from itunes when I sync my iphone. Any help would be greatly appreciated!

You should copy everything from your old computer, or your backup copy of your old computer to your new one.

AudioHQ and Diagnostics prob

Similar Messages

Maybe you are looking for