AUDIOLINE IP-7 DOES NOT DIAL OUT ANYMORE WITH VERS...

... can someone help me to solve this problem, please? Thanks!

The Photoshop executable really should be showing 12.0.4.0 as the executable version should have been updated by the updater.
I'm sorry for the really basic question, but did you reboot after installing the 12.0.4 update?
I do vaguely remember a few forum posts claiming the updater had only worked partially, though in my own case it updated all the files no problem. Can you recall whether you changed anything under the Photoshop 32 bit installation area (e.g., did you move or remove any of the Adobe plug-ins, for example)?
If memory serves, the workaround for a "partial update" was to uninstall Photoshop, then reinstall 12.0.0, then update to 12.0.4.
-Noel

Similar Messages

GE 31591 does not dial out

Hi - This is my second Skype phone. I first go the RTX 3088 and had to reboot the base every couple of days. I then bit the bullet and purchased the GE 31591 and set up was a breeze, the only problem I encountered was that I did learn to dial out I needed to dial 1-areacode - xxx-xxxx but I could live with dialing the extra 1. All was good for about 2 weeks and then out of the blue I tried calling my own cell number to look for my phone and noticed that it would not dial out. I can hear the phone dialing out and then it goes silent and my cell phone does not ring.(nor any othe phones that I dial) The GE 31591 recieves calls fine. I purchase a skype number so that I could get rid of my landline. I can dial out from my PC when I login to this same Skype account. I tried rebooting the base station but nothing works. This has been like this for a couple of weeks. I have invested alot of money and time into Skype and really do not want to go back to a landline.

Hi - I fixed this - It appears that a firmware update changed my Preferred line setting.

My ipod does not alert me anymore when I get new mail

My ipod does not alert me anymore with sound or a number for amount of messages. When I press mail, the emails then come up with the alert sound. Facebook alerts work ok.

If this did not work, try to set it up as new device again, explained here:
How to back up your data and set up as a new device

Backlight does not turn on anymore Satellite M70-147

Hello outhere,
The backlight of my M-series M70-147 does not turn on anymore.
I first noticed this when awakening the laptop from standby or hibernation mode.
At first I thought the screen was not working anymore, but when I looked closely I could still make out the icons on the desktop vaguely. So at first I rebooted the laptop and then most of the times the backlight would turn on and stay on.
But now it does not do that anymore, not even when I close the screen (to force standby mode) and then open it again, the backlight won't turn on.
I also looked at other forums and topics what the cause might be, a broken backlight or a faulty power inverter.
So can anybody with the symptons described tell me what the cause might be?
I'm pretty sure nothing is wrong with the graphics card because when I hooked on my laptop to my dads LCD monitor it just displayed the desktop of my laptop on the LCD monitor. Also the first time I did this after pressing Fn-F5 a few times the screen of my laptop would come on some times. But now it does not do that anymore.
So can anybody with the symptons described tell me what the cause might be?
Many thanks.

> So can anybody with the symptons described tell me what the cause might be?
For me it looks like a faulty FL inverter.
The FL inverter is a small part behind the display frame and it controls the backlight.
Usually the external display should work properly because the FL inverter affects the internal display only...
However, the issue can be solved only by replacement of this part.
I recommend contacting the Toshiba ASP in your country to get this part replaced

Web.show_document does not open browser anymore

We upgraded our production database over the weekend from 10g to 11g. When it was still 10g, our Forms application used to open a PDF embedded in IE. After moving to 11g, it does not open IE anymore and shows no error messages. Clicking the button with the web.show_document command does nothing. Our test database is also 11g but does not have this problem. What could have gotten wrong?

I can't explain why it seems to started failing all of a sudden. We often hear comments like this only to later discover that either someone else made changes of which you are unaware or possbily a software update occurred automatically. For example, the JRE version may have been auto-updated.
As for recoding in an alternative fashion, it will be difficult for me to say specifically because I don't know the app nor do I know your needs. The biggest, and it isn't all that big, deal will be to identify from where the pdf being opened comes from. In other words, does it already exist on the client machine or is it downloaded to the client from the/a server? Also important to know is whether or not the file name is known or not.
So, if you want to change the code, first figure out how you want the application to complete the task. Here are my suggestions:
Suggestion 1.
<blockquote>If the file (pdf in your case) originally resides on a remote server, then leave it there. The document can be opened using a direct url to the file on the remote server. For example:
WEB.SHOW_DOCUMENT ('http://server/somepath/my.pdf','_blank');If the file lives within the Forms directories, you can even use a relative path rather than the fully qualified one above. For example, if the files live in \forms\java\foo then you can do this:
-- The exact entry may differ slightly depending on which
-- Forms version you are using and where you locate the files
WEB.SHOW_DOCUMENT ('/forms/java/foo/my.pdf','_blank');This makes the application a little more flexable given that you would not need to change the app code if the server name changed. Once the file has been opened on the client side, whatever pdf reader the end-user is using will offer a "Save" option. So if they choose to save the file locally, they can do so as they desire.</blockquote>
Suggestion 2.
<blockquote>If, for whatever reason, the file is downloaded to the client or just happens to already exist on the client, you can use WebUtil's CLIENT_HOST (or WEBUTIL_HOST.HOST) command to open the file locally. There are several ways to do this and which method you choose will depend on a few factors. For example, are all the client machines Windows based? I will assume, for this example that the client machines are Windows based. And, because I like to write code as generically as possible, here is a way to open documents on Windows without the need to know which application normally handles it. In other words, you don't need to know that it will be Adobe Acrobat that opens pdf files or that MS Word will open doc files.
-- In this example, the value of myPathAndFile is the path and filename.
-- For example, myPathAndFile := 'C:\Users\<USER_NAME>\Documents\foo.pdf';
CLIENT_HOST('rundll32 shell32,ShellExec_RunDLL '|| myPathAndFile);This is a bit of an old school way of accomplishing the task, but it is very effective and flexiable. Alternatively, you could use CLIENT_HOST to directly call the file, but this may not always work. For example:
CLIENT_HOST('C:\Users\<USER_NAME>\Documents\foo.pdf');</blockquote>

Ports 1,2,3 will not dial out port 0 fine

Dear community,
I could use a little direction..
I have a 2821 "COMHS00ARB" SN: FTX1302A1UP
It has a VIC2-4FXO on port zero I have an analog phone line that functions perfectly, on ports 1,2,3 I get dial tone and they will receive calls but will not dial out.
other interesting observations:
1: If I connect a laptop to GE 0/1 I get not LAN Lights port GE 0/0 is fine and is the uplink
2: the Gig E port on the NME port I can not get LAN lights if I plug cable in from laptop
3: Aux on front of chassis same no lights on LAN
My first thought is to replace the VIC2-4FXO card to see if its faulty
My second thought is that maybe the 2821 has taken a hit from lightening.. however all internal phones seam to be fully functional, although when I select the line on the corresponding LCD hard button I do not get the hard button to light, even on the working line?
Any directions would be greatly appreciated,
Also if I replace card do I need to worry about firmware versions?

Hello,
It seems that the number you are trying to dial is not correct or the dialplan does not recognize it.
HTH,
Alex
*Please rate helpful posts

Time Machine does not back up anymore

Hello,
My Time Machine keeps on 'calculating' and does not back up anymore. It seems that the Time Capsule is full, but until recent it always deleted the oldest backups automatically (with a message).
Maybe a Time Machine Buddy report helps:
+Starting standard backup+
+Attempting to mount network destination using URL: afp://Marko%[email protected]/TC+
+Mounted network destination using URL: afp://Marko%[email protected]/TC+
+QUICKCHECK ONLY; FILESYSTEM CLEAN+
+Disk image /Volumes/TC/MBP_002332c8a134.sparsebundle mounted at: /Volumes/Backup of MBP+
+Backing up to: /Volumes/Backup of MBP/Backups.backupdb+
+Error writing to backup log. NSFileHandleOperationException:* -[NSConcreteFileHandle writeData:]: No space left on device+
+Event store UUIDs don't match for volume: Macintosh HD+
+Error writing to backup log. NSFileHandleOperationException:* -[NSConcreteFileHandle writeData:]: No space left on device+
+Exception writing exclusions cache. NSFileHandleOperationException:* -[NSConcreteFileHandle writeData:]: No space left on device+
+Unable to create exclusions cache data.+
+Failed to write exclusions cache. Continuing anyway.+
+Error writing to backup log. NSFileHandleOperationException:* -[NSConcreteFileHandle writeData:]: No space left on device+
+Waiting for index to be ready (101)+
+Waiting for index to be ready (101)+
Any help is greatly appreciated!
Thanks!

Do you have other data on the Time Capsule, besides backups?
It looks like the TC is so full that Time Machine can't get started far enough to delete some old backups.
If there is other data there, copy something elsewhere and delete it, at least temporarily. It doesn't have to be very large; 20 MB or so should be enough.
If not, try to delete an old backup manually per #12 in Time Machine - Frequently Asked Questions (or use the link in *User Tips* at the top of this forum).
You might want to connect via Ethernet cable if possible; especially if Time Machine is trying to do a large backup, it will have to delete a lot of old ones. It will be 2-3 times faster than via WIFI.
|
Mixing Time Machine backups and other data on a Time Capsule can be a problem. Once you get this sorted out, see #Q3 in Using Time Machine with a Time Capsule (or use the link in *User Tips* at the top of the +Time Capsule+ forum).
Message was edited by: Pondini

Playbook shut down and does not power on anymore

My playbook shut down while reading an email and does not power on anymore. Any idea how to fix this?

Try holding power for 20seconds. This will do a hard reboot ofthe device. It's was also mentioned that sometimes leaving it plugged in for awhile can help.
- If you like my response/post, or it helped you find an answer you were looking for, please provide a Kudo - white star to the bottom right of this post. -
- Please use the search bar at the top, or check out the PlayBook FAQ's for help getting started -
- Hockey DrillBook -

Hi... I would like to purchase a Tablet Sony Xperia Z 2 10.1 (the last one of the Z series) and I was told that Adobe does not support Sony anymore.... I need to be able to open and read Adobe PDF files and I would like to know if this tablet can still us

Hi... I would like to purchase a Tablet Sony Xperia Z 2 10.1 (the last one of the Z series) and I was told that Adobe does not support Sony anymore.... I need to be able to open and read Adobe PDF files and I would like to know if this tablet can still use Flash Player...
Is there anyo who can help me with this? I asked in the shop and I was told "yes of course" , but when I contacted Sony directly I was advised to check with Adobe as apparently in the recent months Adobe and Sony haven't been getting along anymore...

You may be mixing up two entirely different Adobe products.
1. Adobe Flash Player. Needed to view web pages designed with Flash. Not needed to view PDF files. Not available for Android (not just Sony).
2. Adobe Reader. Reads PDF files. However, the Android can also read most PDF files without needing Adobe Reader.

My iphone 5 does not turn on anymore. when i plug the charger in the apple icon turns on and off but the home screen never shows up.what do i do to fix it? how can i get my info back?

My iphone 5 does not turn on anymore. when i plug the charger in the apple icon turns on and off but the home screen never shows up.what do i do to fix it? how can i get my info back?

from the information you provided i can't tell if it is a hardware problem or a software problem. I do have an idea though, try to press your home button and lock button at the same time.

External hard drive does not come out in desktop

greetings! whenever i plug in an external hard drive or a USB flash disk through usb, it does not come out in the desk top. before, it used to come out, now it doesn't. i am still using the exact macbook. i think i touched something in the settings. please help

Go to finder and choose preferences under finder in the menu bar. Now check and see if under General you have the choices clicked of what you want to show on the desk top.

BADI ME_PROCESS_PO_CUST - DOES NOT CLEAR OUT ERROR

In ME21N I want to validate the field Commodity Code - STAWN. I have used the BADI ME_PROCESS_PO_CUST*
. Have used get_foreign_trade() in the PROCESS_ITEM method . I am able to throw an error . It is doing it but*
after throwing error then when we give a valid Commoditycode too it is still showing the error and not clearing the error .*
As suggested by Dean Q I used INCLUDE mm_messages_mac,
tried im_item->set_foreign_trade( ls_mepo_eipo) still when a valid Commodity code is entered after an invalid one it does not clear out the error. In fact on checking using break-point I found that the second time it does not enter into the method PROCESS_ITEM. Any help is welcome
Nivedita

Hi,
In SE18 give ME_PROCESS_PO_CUST as the enhancement spot and display. At the left side of the screen you can see the badi definition ME_PROCESS_PO_CUST. Expand the tree and double click on implementations. You can see the enhance implementations created. Double click on the enhancement implementation and in that screen there is a check box 'Implementation is active' and field 'Effect in current client'.
If you know the enhancement implementation name(not the badi implementation name), you can check it directly from se19.
Regards,
Poornima

I have a disk in my mac and came not get it out? I use the command E key to eject but it does note come out?

I have a disk in my mac but it does note come out useing command e to eject? how do i get it out or do I have to get it jixed?

Force eject a stuck cd/dvd
First try the normal methods to remove the disc. Drag its icon to the Trash can in the Dock or select 'Eject' from the File menu.
If you are running a virtual machine, e.g. VMFusion, ensure that the CD is disconnected from the virtual machine. This will sometimes allow the CD to now show up in Mac OS X.
Shut down the computer and start up whilst holding down the mouse button. This may take some time, but keep your finger on the mouse button right up until the disc comes out or the log-in screen has appeared.
If you have Toast Titanium installed on your computer, choose EJECT DISC from the menubar.
Sometimes you can successfully use the eject disc button in iTunes even if the disc is not visible to the Finder
Open Disc utility and choose the disc you wish to eject in the left-hand pane, then click on the Eject button.
Some Macintoshes have a paperclip hole that you can insert a straightened paperclip into, manually triggering the eject mechanism.
Open Terminal and type "drutil tray eject" to eject the disc/tray, and "drutil tray close" to close the tray.
If your computer has an eject button on the keyboard, restart the computer holding down the Option key. When the startup disk selection screen appears, let go of the option key and press the keyboard's eject button.
Source: http://guides.macrumors.com/Force_Eject_a_Stuck_CD_or_DVD

Gmail task list does not pop-out

After installing 3.6.7 gmail task list does not pop out. When I click the pop-out arrow, the task list opens in another tab, not in another stripped down window like it used to. Any ideas?
== URL of affected sites ==
http://

Dear,
Is this quality Plan is back dated and Lot size should be 1 to 9999,999.
Why are you creating rate routing? check lot for 04 insp type in QA02.
Or for old material just create one new order and test it once again.
You can check the statuses in config.
QM>Quality Planning>Inspection Planning>General>Define Task List Status.
You should find that "4" is in there with all the check marks on.
QM--> Quality Inspection --> Inspection Lot Creation --> Maintain Inspection Lot Origins and Assign Inspection Types.
There is a column called status. For each inspection ORIGIN, you can specify the status of the inspection plan. It appears someone in your system changed the 4's to an X and then created the status "X".
Regards,
R.Brahmankar

IMac does not start up anymore

After 3 Days of random freezing, now it does not start up anymore only gives me a repeating sound, but screen stays black. What can I do ?

You can take it into the Apple Store or a local ASAP for repair.

AUDIOLINE IP-7 DOES NOT DIAL OUT ANYMORE WITH VERS...

Similar Messages

Maybe you are looking for