Audiophiles: Noisy USB Connections between Mac Intel and DJ Mixer
Seeking experience/ help/ advice from DJs or audiophiles:
I'm having trouble with noise in an audio system after connecting a Numark USB DJ mixer to my new iMac via USB.
The noise is a steady, high-pitched tone with low amplitude that does not increase or decrease when the gain on the mixer is adjusted. In fact, the noise persists when all levels (channel and master) are turned all the way down. The noise only appears after making the USB connection and selecting the USB audio driver in the Sound panel in System Prefs. The sound does not persist if the cable is connected but some other device (eg Built-in audio out) is selected in the Sound panel.
However, oddly, when I made a connection using a 1/4 to RCA cable from the audio out on the iMac to an available channel on the mixer, the noise was reduced (but not eliminated)when I selected the USB driver in the Sound panel.
When I record the incoming USB audio signal using Peak 4.14, the noise is not captured by the software. It appears to be present only in the external stream/ speakers. The speakers are Samson 65a active studio monitors positioned more than 5 feet from the computer and audio system. None of the audio cables are touching any of the power cables in the setup.
The only possible explanation I can think of is that the electrical outlet in my home is not grounded properly. But the audio system sounds fine on its own - no noise. If there were a grounding problem wouldn't noise exist regardless of whether or not a USB audio channel were open and active within the system?
Has anybody experienced problems with USB-related noise in an audio system?
The purist in me is going nuts!
Thanks in advance for any help!
iMac Intel Duo 20" Mac OS X (10.4.4)
iMac Intel Duo 20" Mac OS X (10.4.4)
I had the same problem and came here by searching.
Per Rosengren's method solved the problem, but he didn't say how to do it, so I'll try to explain step-by-step for anyone that may venture here.
Open Device Manager (right click on Computer > Manage > on the left side, under System Tools choose Device Manager)
Choose the problematic device in Network Adapters (for me it's called HTC Remote NDIS based device)
Right click on it and choose Update Driver Software...
Click Browse my computer for driver software
Click Let me pick from a list of device drivers
Uncheck the box Show compatible hardware
For the manufacturer, choose Microsoft Corporation
Now you will have two options:
- Remote NDIS based Internet Sharing Device
- Remote NDIS Compatible Device
I chose the second one and it solved the problem, but if it doesn't work you could try the other one. In my case, the driver that was being used was neither of these, but a special driver from Android SDK ADT bundle.
Pick one and click Next. If a dialog comes up, confirm by clicking Yes.
Wait a few seconds for the connection to restart. If it doesn't work, try disabling and reenabling USB tethering on the phone, or reconnect the USB cable.
I should also note that I'm using a custom Android ROM on HTC Wildfire S (unofficial Cyanogenmod). If you have a stock ROM with HTC Sense, maybe this method may not work and you'll need a proprietary HTC driver.
Similar Messages
-
Loose connection between Mac Mini and Apple TV 2
Help! I have a new Mac Mini 2.5 ghz running Lion and Apple TV2 hooked up to my 32 inch LG TV.
Before I got the Mac Mini, Apple TV was running just fine on the same network with my Win 7 machine.
Ever since I got the Mac Mini and I run the Apple Tv at the same time. I loose connection on both. My cable provider replaced the router and all my other Win 7 machines run just fine on a wireless network. I might also add that when the apple tv and mac mini goes down, my ipad 2 goes down too. Of course, air play doesn't work . It comes and goes.
I have a 2nd Apple TV 2 and hooked that up to the same tv with the same results. I have called Apple many times. They are helpful but not been able to solve my problem. The cable provider and I have traced down to a conflict between the Apple TV, Mac Mini and the IPAD 2 .
Does anyone have any ideas what may be wrong?I have had multiple ATV's, desktops, laptops, and i Devices all running at the same time without a problem. Typically on a network when you start 2 devices and the connection crashes it is an IP problem. Check the IP address on both devices and see. It is usually easiest to have the router assign IPs automatically using DHCP. The router, computers, and ATVs should also be set to DHCP.
If everything is set to DHCP try disabling DHCP and assign fixed IPs to each device. -
I cant establish a connection between Mac mini and the wireless keyboard
I just bought a Mac mini but I can't link the wireless keyboard with the Mac mini
Same with my new mac mini.
Got it brand new via the online shop.
Happy to start with the new mac i really got dissapointed by the fact that it`s impossible to pair the wireless keyboard unless you first connect a USB keyboard to the mac mini and start the configuration.
THIS ***** !!!
No hint at all from apple that you first have to connect the USB keyboard.
I had to borrowed a USB keyboard from my neighbour :-((
After setting things up it was no problem at all to establish the BT connection with the keyboard.
Works fine now. -
How to establish connection between mac(Ichat) and PC
I'm the happy owner of a brand new Isight camera.
I want to establish contact to my father in Poland.
He owns a PC.
Wich kind of account and messenger should he use in order for me to be able to speak with him via Ichat?
Yours in advance
K KidonHi,
Also look at http://discussions.apple.com/thread.jspa?threadID=406147
11:42 PM Thursday; April 13, 2006 -
Hi,
I am running XP SP 2, on a Dell Vostro 1000, Palm OS Garnet v5.4.7 on a Tungsten E2. I have worked though issues relating to synchronization, Outlook 2007, Docs to Go, etc., in the past. Thank you board members!
Once I worked thru all the initial problems, my Tungsten E2 was sync' ing beautifully to my laptop until a few days ago. There have been no changes (I know of) to the configuration, but now I receive "The connection between your device and the desktop could not be established. Please check your setup and try again." On the laptop I sometimes get "USB device not recognized." I am unclear why I get the PC message sometimes and not others.
I have tried the following: (not necc exactly in this order)
Double checked Hot Sync Mgr settings: Local USB (ver. 6.0.1)
Reset the Palm (multiple times)
Rebooted the laptop (multiple times before and after the Palm resets)
Went to Support Libraries including http://kb.palm.com/SRVS/CGI-BIN/WEBCGI.EXE/,/?St=57,E=0000000001060189973,K=9550,Sxi=3,Case=Obj(3695...)
and http://kb.palm.com/SRVS/CGI-BIN/WEBCGI.EXE?New,Kb=PalmSupportKB,ts=Palm_External2001,Case=obj(1409)
Followed the steps in "Start Here" found at http://forums.palm.com/palm/board/message?board.id=windows_hotsync&thread.id=26057
Moved Backup directory as per a post on this forum
Looked for a deleted a file called "Graffiti_ShortCuts_____________" per a post on this forum
Followed the steps in HotSync troubleshooter guide you can run through located on
http://kb.palm.com
Went into Device Manager - found it shows no yellow ! 's
Followed Device Mgr Troubleshooter - went all the way thru with no solution
Tried all four USB ports - the PC's bell-like tone does not sound when I disconnect or reconnect the Plam's cradle like it does when I conn/disconnect other USB devices -I think that is a clue. ...?
Cleaned the Palm's contacts (and cradle's contacts with a old, dry toothbrush)
Read all the posts under "USB device not recognized."
OK, I'm at a loss, can anyone help me? Many thanks in advance!
~Bob
Post relates to: Tungsten E2Hello!
Using a cradle with the Tungsten E2? Tried bypassing the cradle and just use the hotsync cable? Tried a different computer yet? Somehow, the PC is having problems getting a signal from the device. I assume you have the laptop charger plugged into the laptop during this? Not going through a docking station or port-replicator.
One crazy thing you can try is unplug the charger from your laptop, remove the battery from the laptop and leave it out for like 10mins and put it back in and reboot the laptop. This should not cause side effects but still contact your OEM to make sure that nothing else is needed after leaving the battery out for extended period of time. Keep me posted.
Post relates to: Treo 650 (Unlocked GSM) -
I have problems pairing my Apple TV with my Mac and Iphone 4s. There was some connection between MAC and the App.TV when my operating system was LEOPARD. I now have OS Lion and there is no connection. I also could not find the AirPlay icon on the my Iphone. What do I do? Any recommendations?
Hi shldr2thewheel,
it has been a while since we have last spoke, I would like to let you know, I am still working on getting used to the switch from windows to a Mac/Apple system. I do have a new question for you, I did purchase In Design CS5.5 through journeyed.com through Cuyahoga Community College of which I attend as a student, is there a way to purchase an online book through iTunes to learn that as well? Also, you know me, the struggling student, I would also, when and if the book can be purchased through the iTunes, would need to know if you do know of a much easier book for struggling students like myself and at a reasonable price as well for the In Design CS5.5 program. Our campus bookstore had closed early, and, so did the colleges library and our local library here where I do live, so, I cannot go to either place to purchase a book or to take out a book, plus cash funds are low at this moment as well but, I do have money left on the iTunes account to use, if it can be used. So, can it be used, the iTunes money, towards finding a low priced online book? I am in great need of assistance as I have a project due for my one course for this Tuesday, September 4, 2012.
Sincerely in need of help once again,
Kim -
(Trouble printing) Trouble with connection between Macbook Pro and Hp Deskjet 1510.
Trouble with connection between Macbook Pro and Hp Deskjet 1510. (Nothing Prints).
I have a Macbook Pro and am having difficulty printing documents from ‘Pages' from my Hp Deskjet 1510. I have installed the necessary software for the printer and it is connected via USB. Every time I try to print the printer icon comes up as it should, 'printing' and then 'job completed' and then the icon disappears. (Nothing is printed.) I thought it might be something to do with Pages compatibility with the printer but exporting the document to Word or making it a PDF doesn’t change anything. I don’t have Microsoft Word on my computer. The scanner does work and when I printed a ‘Test Page’ that worked too.
Let me know if you know why this is happening.With these settings the network now works flawlessly, however, when i have my ethernet cable plugged in, my internet access via my airport card(on the macbook pro) is no longer available. Hoping you can tell me why this would be with this info i've provided.
Educated guess. The networking devices have priorities as to which are used. The standard order is that Ethernet has a higher priority than Airport.
While your Ethernet is unplugged it is inactive and the Mac ignores it. Once you plug it in, the Mac sees that it is active and switches traffic to that interface.
I actually take advantage of this feature at home, but configuring my Airport and Ethernet with identical fixed IP addresses. Normally I'll use Airport, but if I'm copying a huge file and I want faster performance, I'll just walk my MacBook (previously iBook, previously Powerbook) over to my Ethernet switch and plug in my MacBook. Magically, the Mac detects that the Ethernet is active and continues the file transfer uninterrupted over the faster 100baseT Ethernet connection. When the transfer is finished, or if I really need to move back to the Comfy Chair, I unplug the Ethernet cable, and all activity reverts back to the Airport, all without disrupting any existing networking connections.
You on the other hand have totally different settings for your Ethernet and your Airport, so when you switch to Ethernet, you basically loose your Airport connections.
Something you can try:
System Preferences -> Network
Gear icon on the bottom left, next to the [+] [-] icons.
Select *Set Service Order...*
Now Drag the network interfaces into the perfer priority order you want. In this case put Airport above Ethernet.
NOTE: You may want to create a new Network Location for this, instead of messing with your normal home Location (which is most likely the default Automatic. That way you have your original you can always fall back to. -
Kernel Panic while transfering data between MAC HD and network drives
Kernel Panic while transfering data between MAC HD and network drives. it's an iMAC 24" 2011. Snow Leopard 10.6.8. I can't seem to find the cause to this.Thank you guys !
Here is the log fine with error code:
Error code: 0x0000000000000000
Interval Since Last Panic Report: 5 sec
Panics Since Last Report: 1
Anonymous UUID: 3C5AA43F-D876-4F9D-A831-D8043218C6E0
Tue Aug 16 14:54:46 2011
panic(cpu 0 caller 0xffffff80002d1208): Kernel trap at 0xffffff7f815c6b54, type 14=page fault, registers:
CR0: 0x000000008001003b, CR2: 0x0000000000000005, CR3: 0x0000000000100000, CR4: 0x0000000000040660
RAX: 0x0000000000000000, RBX: 0xffffff8000000000, RCX: 0x0000000001000000, RDX: 0xffffff8013ae9200
RSP: 0xffffff80de173ea0, RBP: 0xffffff80de173ed0, RSI: 0x0000000000000000, RDI: 0xffffff8013ae9200
R8: 0x0000000000000001, R9: 0x0000000000000000, R10: 0x0000000000000000, R11: 0x0000000000000000
R12: 0x0000000000000000, R13: 0xffffff8016207008, R14: 0xffffff8015a228f8, R15: 0x0000000000000000
RFL: 0x0000000000010246, RIP: 0xffffff7f815c6b54, CS: 0x0000000000000008, SS: 0x0000000000000010
Error code: 0x0000000000000000
Backtrace (CPU 0), Frame : Return Address
0xffffff80de173b40 : 0xffffff8000204d15
0xffffff80de173c40 : 0xffffff80002d1208
0xffffff80de173d90 : 0xffffff80002e3f4a
0xffffff80de173da0 : 0xffffff7f815c6b54
0xffffff80de173ed0 : 0xffffff80002524fe
0xffffff80de173f00 : 0xffffff8000478c7f
0xffffff80de173f40 : 0xffffff7f8159b158
0xffffff80de173fa0 : 0xffffff80002c8527
Kernel Extensions in backtrace (with dependencies):
com.thursby.kext.cifs(5.1)@0xffffff7f815ae000->0xffffff7f815cffff
dependency: com.thursby.kext.NetBIOS(5.1)@0xffffff7f8158b000
com.thursby.kext.NetBIOS(5.1)@0xffffff7f8158b000->0xffffff7f815adfff
BSD process name corresponding to current thread: kernel_task
Mac OS version:
10K549
Kernel version:
Darwin Kernel Version 10.8.0: Tue Jun 7 16:32:41 PDT 2011; root:xnu-1504.15.3~1/RELEASE_X86_64
System model name: iMac12,1 (Mac-942B5BF58194151B)
System uptime in nanoseconds: 105374280984
unloaded kexts:
(none)
loaded kexts:
com.vmware.kext.vmnet 3.1.3
com.vmware.kext.vmioplug 3.1.3
com.vmware.kext.vmci 3.1.3
com.trendmicro.kext.KERedirect 1.0.0
com.trendmicro.kext.filehook 1.5.0
com.vmware.kext.vmx86 3.1.3
com.thursby.kext.cifs 5.1
com.thursby.kext.NetBIOS 5.1
com.apple.filesystems.smbfs 1.6.7 - last loaded 60402747883
com.apple.filesystems.autofs 2.1.0
com.apple.driver.AppleTyMCEDriver 1.0.2d2
com.apple.driver.AppleHWSensor 1.9.3d0
com.apple.driver.AudioAUUC 1.57
com.apple.driver.AppleUpstreamUserClient 3.5.7
com.apple.driver.AppleMikeyHIDDriver 1.2.0
com.apple.driver.AppleMCCSControl 1.0.20
com.apple.driver.AppleIntelPenrynProfile 17
com.apple.Dont_Steal_Mac_OS_X 7.0.0
com.apple.driver.AppleMikeyDriver 2.0.5f14
com.apple.kext.ATIFramebuffer 6.3.6
com.apple.driver.AppleBluetoothMultitouch 54.3
com.apple.driver.AppleIntelHDGraphics 6.3.6
com.apple.driver.AppleIntelNehalemProfile 11
com.apple.driver.AudioIPCDriver 1.1.6
com.apple.driver.AppleHDA 2.0.5f14
com.apple.driver.AppleGraphicsControl 2.10.6
com.apple.ATIRadeonX3000 6.3.6
com.apple.iokit.AppleBCM5701Ethernet 3.0.5b8
com.apple.driver.AppleIntelMeromProfile 19
com.apple.driver.AirPort.Atheros9388 426.35.3
com.apple.driver.ACPI_SMC_PlatformPlugin 4.7.0a1
com.apple.driver.AppleLPC 1.5.1
com.apple.driver.AppleBacklight 170.0.46
com.apple.kext.AppleSMCLMU 1.5.2d10
com.apple.driver.AppleIntelSNBGraphicsFB 6.3.6
com.apple.driver.AppleUSBCardReader 2.6.1
com.apple.driver.AppleIRController 303.8
com.apple.iokit.SCSITaskUserClient 2.6.8
com.apple.iokit.IOAHCIBlockStorage 1.6.4
com.apple.driver.AppleUSBHub 4.2.4
com.apple.driver.AppleFWOHCI 4.7.3
com.apple.BootCache 31.1
com.apple.AppleFSCompression.AppleFSCompressionTypeZlib 1.0.0d1
com.apple.driver.AppleEFINVRAM 1.4.0
com.apple.driver.AppleAHCIPort 2.1.7
com.apple.driver.AppleUSBEHCI 4.2.4
com.apple.driver.AppleUSBUHCI 4.2.0
com.apple.driver.AppleACPIButtons 1.3.6
com.apple.driver.AppleRTC 1.3.1
com.apple.driver.AppleHPET 1.5
com.apple.driver.AppleSMBIOS 1.7
com.apple.driver.AppleACPIEC 1.3.6
com.apple.driver.AppleAPIC 1.4
com.apple.driver.AppleIntelCPUPowerManagementClient 142.6.0
com.apple.security.sandbox 1
com.apple.security.quarantine 0
com.apple.nke.applicationfirewall 2.1.12
com.apple.driver.AppleIntelCPUPowerManagement 142.6.0
com.apple.driver.AppleProfileReadCounterAction 17
com.apple.driver.AppleProfileTimestampAction 10
com.apple.driver.AppleProfileThreadInfoAction 14
com.apple.driver.AppleProfileRegisterStateAction 10
com.apple.driver.AppleProfileKEventAction 10
com.apple.driver.AppleProfileCallstackAction 20
com.apple.iokit.IOSurface 74.2
com.apple.iokit.IOBluetoothSerialManager 2.4.5f3
com.apple.iokit.IOSerialFamily 10.0.3
com.apple.driver.AppleHDAHardwareConfigDriver 2.0.5f14
com.apple.driver.IOBluetoothHIDDriver 2.4.5f3
com.apple.driver.AppleMultitouchDriver 207.11
com.apple.driver.DspFuncLib 2.0.5f14
com.apple.iokit.IOAudioFamily 1.8.3fc2
com.apple.kext.OSvKernDSPLib 1.3
com.apple.driver.AppleSMBusController 1.0.10d0
com.apple.iokit.IOFireWireIP 2.0.3
com.apple.iokit.AppleProfileFamily 41
com.apple.driver.AppleHDAController 2.0.5f14
com.apple.iokit.IOHDAFamily 2.0.5f14
com.apple.iokit.IO80211Family 320.1
com.apple.iokit.IONetworkingFamily 1.10
com.apple.driver.IOPlatformPluginFamily 4.7.0a1
com.apple.driver.AppleSMBusPCI 1.0.10d0
com.apple.driver.AppleBacklightExpert 1.0.1
com.apple.iokit.IONDRVSupport 2.2
com.apple.driver.AppleSMC 3.1.0d5
com.apple.driver.AppleThunderboltEDMSink 1.1.1
com.apple.driver.AppleThunderboltEDMSource 1.1.1
com.apple.kext.ATI6000Controller 6.3.6
com.apple.kext.ATISupport 6.3.6
com.apple.iokit.IOGraphicsFamily 2.2
com.apple.driver.AppleThunderboltDPOutAdapter 1.3.2
com.apple.driver.AppleThunderboltDPInAdapter 1.3.2
com.apple.driver.AppleThunderboltDPAdapterFamily 1.3.2
com.apple.driver.AppleThunderboltPCIDownAdapter 1.1.6
com.apple.driver.AppleUSBHIDKeyboard 141.5
com.apple.driver.AppleHIDKeyboard 141.5
com.apple.driver.BroadcomUSBBluetoothHCIController 2.4.5f3
com.apple.driver.AppleUSBBluetoothHCIController 2.4.5f3
com.apple.iokit.IOBluetoothFamily 2.4.5f3
com.apple.iokit.IOUSBMassStorageClass 2.6.7
com.apple.iokit.IOSCSIBlockCommandsDevice 2.6.8
com.apple.iokit.IOUSBHIDDriver 4.2.0
com.apple.iokit.IOSCSIMultimediaCommandsDevice 2.6.8
com.apple.iokit.IOBDStorageFamily 1.6
com.apple.iokit.IODVDStorageFamily 1.6
com.apple.iokit.IOCDStorageFamily 1.6.1
com.apple.driver.AppleUSBMergeNub 4.2.4
com.apple.driver.AppleUSBComposite 3.9.0
com.apple.driver.XsanFilter 402.1
com.apple.iokit.IOAHCISerialATAPI 1.2.6
com.apple.iokit.IOSCSIArchitectureModelFamily 2.6.8
com.apple.driver.AppleThunderboltNHI 1.2.6
com.apple.iokit.IOThunderboltFamily 1.4.9
com.apple.iokit.IOFireWireFamily 4.2.6
com.apple.iokit.IOUSBUserClient 4.2.4
com.apple.driver.AppleFileSystemDriver 2.0
com.apple.iokit.IOAHCIFamily 2.0.6
com.apple.iokit.IOUSBFamily 4.2.4
com.apple.driver.AppleEFIRuntime 1.4.0
com.apple.iokit.IOHIDFamily 1.6.6
com.apple.iokit.IOSMBusFamily 1.1
com.apple.security.TMSafetyNet 6
com.apple.kext.AppleMatch 1.0.0d1
com.apple.driver.DiskImages 289
com.apple.iokit.IOStorageFamily 1.6.3
com.apple.driver.AppleACPIPlatform 1.3.6
com.apple.iokit.IOPCIFamily 2.6.5
com.apple.iokit.IOACPIFamily 1.3.0
System Profile:
Model: iMac12,1, BootROM IM121.0047.B0A, 4 processors, Intel Core i5, 2.7 GHz, 8 GB, SMC 1.71f22
Graphics: AMD Radeon HD 6770M, AMD Radeon HD 6770M, PCIe, 512 MB
Memory Module: global_name
AirPort: spairport_wireless_card_type_airport_extreme (0x168C, 0x9A), Atheros 9380: 4.0.35.3
Bluetooth: Version 2.4.5f3, 2 service, 19 devices, 1 incoming serial ports
Network Service: Ethernet, Ethernet, en0
Network Service: AirPort, AirPort, en1
Serial ATA Device: Hitachi HDS722020ALA330, 1.82 TB
Serial ATA Device: OPTIARC DVD RW AD-5690H
USB Device: Hub, 0x0424 (SMSC), 0x2514, 0xfd100000 / 2
USB Device: Officejet Pro 8000 A809, 0x03f0 (Hewlett Packard), 0x3612, 0xfd140000 / 5
USB Device: Internal Memory Card Reader, 0x05ac (Apple Inc.), 0x8403, 0xfd110000 / 4
USB Device: IR Receiver, 0x05ac (Apple Inc.), 0x8242, 0xfd120000 / 3
USB Device: FaceTime HD Camera (Built-in), 0x05ac (Apple Inc.), 0x850b, 0xfa200000 / 3
USB Device: Hub, 0x0424 (SMSC), 0x2514, 0xfa100000 / 2
USB Device: Keyboard Hub, 0x05ac (Apple Inc.), 0x1006, 0xfa130000 / 5
USB Device: Apple Keyboard, 0x05ac (Apple Inc.), 0x0220, 0xfa132000 / 8
USB Device: BRCM2046 Hub, 0x0a5c (Broadcom Corp.), 0x4500, 0xfa110000 / 4
USB Device: Bluetooth USB Host Controller, 0x05ac (Apple Inc.), 0x8215, 0xfa111000 / 6There is something incompatible would be my guess. Did you disconnect all your peripherals in safe mode just to check?
You might now create a new temporary user account. Log into the new account. Do the panics still occur?
I would also visit The XLab FAQs and read the FAQ on diagnosing kernel panics. Sometimes they can be difficult to track down. Looking at each new panic log would help determine if it's cause is associated with the same extensions. -
Can't establish wireless connection between the printer and computer.
I recently upgraded my wireless to an Apple AirPort Time Capsule. I'm able to set up the printer via USB cable. And I'm able to set up the printer on the network via the Airport WPA utility. However I cannot establish a wireless connection between the computer and the printer. When I go to the printers window in my system prefereces, there is no wireless printer available to add in the "available printers" menu. Only the USB version printer is listed and of course when I disconnect the USB cable it shows as offline.I've tried all the fixes on HP's support pages. I've tried reinstalling the printer on both the router and the computer numerous times. The only thing I haven't done is reinstall the printer using the "Install Wizard" software that is supposed to come with the printer - (mine never came with it in the first place and of course HP doesn't have it available for download). And when I reset the printer to factory settings, then connect it to the computer via the USB, there is no installation software that pops up. Cant even find the **bleep** thing in "Finder". (I'm assuming that it should show up as some sort of external device.) I've checked to make sure both computer and printer are on the same network. (sometimes my computer will grab a connection with the next nearest network.) I've checked all the settings for the printer via the HTML configuration utility. I've even updated my Macbook software and restarted it multiple times. Note: the printer actually worked for a bit when I first switched routers, but the printer's wireless function went offline several times and then quit altogether. Really frustrated that I bought another HP product thinking this time things would be different. HP is no help unless you want to pay $$ for a phone call. I'm about ready to take this thing out in the desert to use for target practice and never buy another HP product ever again.
Hi , I saw your post regarding the problems you are having with your LaserJet Pro P1102w Printer not showing on your Macintosh computer. I may have found some resources for you.
I have a few questions for you, so I can offer some additional assistance:Before you upgraded to the Apple AirPort Time Capsule, was the printer working wirelessly without any issues?
When you say; 'I reset the printer to factory settings', how where you trying to do this?
I found some instructions from this post: How do I reset my Laserjet p1102w to its defaults, copied here for you:
To restore the printer back to factory settings, turn the printer off, hold down the wireless button and the cancel button (x button) then turn the printer back on and don't release the two buttons until the printer stops making noise. (When they say turn the printer off, I think they mean unplug the power cable.)
"I've checked to make sure both computer and printer are on the same network." Do you know if you are able to access the printers Embedded Web Server (EWS)?To access the EWS - Make sure that the Ready light () is on and that the printer is idle and silent.Press and hold the Cancel button (), and release it when the Ready light () begins blinking.The configuration page prints.Type the IP address or host name of the product in the address field of a supported Web browser, and then press Enter on your keyboardLet me know if this page loads
To answer a few more items you have listed:... When I go to the printers window in my system preferences, there is no wireless printer available to add in the "available printers" menu.This could be an issue with your print system, I recommend resetting the printing system and then Repair Disk Permissions - after that try to add the printer again.
... the "Install Wizard" software that is supposed to come with the printer - (mine never came with it in the first place and of course HP doesn't have it available for download)HP provides their software/drivers to Apple to be released through your Apple software updates. You can review this document on how to Install a Mac Printer Driver Using Apple Software Update. Which leads into your next point...
... there is no installation software that pops upWhen you connect the USB cable your mac may still recognize the printer software as being already installed - check for apple updatesOn the Mac, click the Apple menu (), and then click Software Update, or click About this Mac, and then click Software Update. A list of available updates displays.
... Not seeing the printer in "Finder" From what I understand most printers will not show in Finder unless you install a memory card into a supported port on certain printer models, only then will it read it like an external device. A few more things you can check are that the new settings in the Apple AirPort Time Capsule are setup to allow the printer to communicate. There are several of these settings listed in this document; Tips and Workarounds for Common Wireless Network Printer Issues. HP regularly releases firmware updates that may also correct the problem you are experiencing. You can click on this link to Getting Printer Updates for HP LaserJet Pro P1102w Printer. I did find 2 more documents that may offer some additional information as well;HP LaserJet Pro P1102w Printer - Connecting the Printer After Changing Your Wireless NetworkAn 'Unable to Find Printer' Error Displays for the HP LaserJet Pro P1102w Printer Please let me know if any of these steps resolved your issue, or the details of what happened. I look forward to hearing from you, hopefully with good news! Thanks, -
Can I seamlessly toggle Apple TV between Mac Mini and Iphone / iPad?
I am having a Mac Mini, iPad, iPhone and Apple TV. Currently i am using 2 HDMI cables 1 between TV and Mac Mini and 2nd between TV and Apple TV. Seems like If i toggle between iPad / iPhone display via apple TV and Mac Mini display via apple TV; it becomes an issue.
Can I seamlessly toggle Apple TV between Mac Mini and iPhone / iPad?
Regards,
Mahendra Panchal.Seems like If i toggle between iPad / iPhone display via apple TV and Mac Mini display via apple TV;
Toggle how? What are you doing? Why do you have the MacMini connected to the TV? That is the whole point of AppleTV. It is a simple way ( in therory ) to get your content to your TV without having to plug your computer in to your TV.
it becomes an issue.
What does? What is the issue? What specifically fails or does not work? -
I'm a new user - recent convert from longtime Windows to Apple. Thought having desktops and computing aligned with phones and tablets would help. Not so far.
I have a MacMini running Mavericks 10.9.1, and an iMac running Mavericks 10.9.1. File Sharing is set up on both. If either device is rebooted for any reason, file sharing from the Mac Mini to the iMac "breaks" and will not easily restart. Various things eventually brings the connection back - usually having to do with checking and unchecking File Sharing, the AFP button, and/or the SMB button on the iMac - but never the same procedure twice in a row. File Sharing from the iMac to the Mac Mini is never disrupted - always comes back up without a problem. Screen Sharing also works between both without fail, and comes up after reboot of either. No problem there. Only difficulty is from Mac Mini to the iMac.
Why? Any ideas?Should also clarify - usually takes multiple hours of checking/unchecking file sharing settings in order to restore the share between Mac Mini and iMac. NEVER happens automatically.
This is disruptive because I've got the Mac Mini pointing to several file locations on the iMac for various things - photos, music, etc. - and they all hang up unless the share is restored. Real bummer. -
Connection between MacBook Air and iphone 3gs through a hub isn't good
Several times the connection between my computer and iphone has stopped or cancelled saying that the iphone had been disconnected. But nothing had been touched! Why?
Hey,
Plug the iPhone directly into the MBA. If your going to use a hub make sure it's a powered hub, the hub itself should have it's own power cord. If it's powered by the USB port then your going to have issues.
Hope it helps
Post the results :-D -
Connection between SDM client and server is broken
Dear All,
First of all this is what I have
-NW04 SPS 17
-NWDS Version: 7.0.09 Build id: 200608262203
-using VPN connection
-telnet on port 57018 is succesfull
I can login to SDM server (from NWDS and from SDM GUI) I can see the state of SDM(green light), restart it, can navigate through tabs in GUI, but every time I am trying to deploy an ear i have this error:
Deployment exception : Filetransfer failed: Error received from server: Connection between SDM client and server is broken
Inner exception was :
Filetransfer failed: Error received from server: Connection between SDM client and server is broken
I have already read a lot of topics,blogs,notes but didn't find the solution.
Can anybody help me?
Best RegardsHaving same issue. Nothing helped so far... Using NWDS 7.0 SP18.
I have turned SDM tracing on and this is what I see on client side after sending first data package:
com.sap.sdm.is.cs.cmd.client.impl.CmdClientImpl: debug "20120224140253 0280/17 Client: finished sending string part"
com.sap.sdm.is.cs.cmd.client.impl.CmdClientImpl: debug "20120224140253 0280/0 Client: receive String part from Server"
com.sap.sdm.is.cs.cmd.client.impl.CmdClientImpl.receiveFromServer(NetComm ..): Entering method
com.sap.bc.cts.tp.net.NetComm.receive(): Entering method
com.sap.bc.cts.tp.net.NetComm: debug "Method "receive(char[])" could not read all requested bytes. There are still 12 bytes to read"
com.sap.bc.cts.tp.net.NetComm: debug "Caught IOException during read of header bytes (-1, 43):Connection reset"
com.sap.bc.cts.tp.net.NetComm: debug " throwing IOException(net.id_000001)"
com.sap.bc.cts.tp.net.NetComm.receive(): Exiting method
com.sap.sdm.is.cs.cmd.client.impl.CmdClientImpl: Exiting method
com.sap.sdm.is.cs.cmd.client.impl.CmdClientImpl: debug "20120224140253 0281/1 Client: connection was broken"
com.sap.sdm.is.cs.cmd.client.impl.CmdClientImpl: Exiting method
com.sap.sdm.is.cs.cmd.client.impl.CmdClientImpl: debug "20120224140253 0281/0 Client: finshed sendAndReceive"
com.sap.sdm.is.cs.cmd.client.impl.CmdClientImpl: Exiting method
My connection on server is still active so I have to restart SDM server to reset and try it again.
Anyone have idea whats happening?
Edited by: skyrma on Feb 24, 2012 2:46 PM
Edited by: skyrma on Feb 24, 2012 2:47 PM
Edited by: skyrma on Feb 24, 2012 2:47 PM -
No music visible after broken connection between iPod classic and pc
Hello,
I have a 4th generation 60 GB iPod classic. Model: A1099
During the connection with the PC, the usb connection was accidentally disconnected , and now music is no longer visible on the ipod
iPod is also not recognized by itunes.
I have tried to reset with no result. I am looking for an installer program to restore to factory defaults.
Can not find the software on the Apple site
Who can help me to find this software, or knows how to solve this program.
ThanksSince you are trying to manually manage the iPod's contents (a.k.a. dragging and dropping content onto it) have you double checked to make sure the Manually manage music and videos option is enabled from under the iPod's Summary tab?
If that is not the case, what happens when you try to drag and drop songs onto it? Any error messages?
B-rock -
No connection between wireless keyboard and IMac
I had to change batteries in my wireless keyboard for my Imac. After that I did not manage to reestablish the connection between the keyboard and the machine. I did not manage to get the blue tooth going again before I went to bed and the session timed out , my IMac is now locked and since my keyboard does not work I am not able to type the password. How can I solve this?
Are the batteries installed properly? Have you tried other batteries?
Have you read for possible solutions over in the "More Like This" thread over here?----------------------->
Plan B: It's a good idea to keep a wired keyboard as a standby. Suggest that you get hold of one.
Maybe you are looking for
-
Installing .suit fonts?
received a .suit font from client. can't install with Linotype FEX or Fontbook. font is from a reliable source and has been resubmitted so i don't think it's corrupt. anybody have any suggestions?
-
How do you retrieve deleted texted messages on iphone 4s?
I deleted the wrong text message and I'm trying to get it back. Whenever I am in the search mode and type in a certain letter, I can see the partial text. So I know that the message is still in my phone's memory bank. Can anyone Please help me get th
-
Hi Everyone, I am new to CSS and its ability. I do understand how Dreamweaver works and have been designing table-based websites for years. I also know how a CCS file works. What I don't know is how to START a website design using CSS. Say I have a C
-
Mac App Store Will Not Load At All
Hello all, I just received my new MacBook Pro a few days ago, and after booting it the first time upgraded to the most recent Mac OS X (10.6). This of course installed the Mac App Store. The Mac App Store will open but will not load - period. It will
-
Can we explain the following counter..FCP_SW_CNTR_RX_WT_AVG_B2B_ZERO We see it when looking for dropped packets on the ds-9248-256k9 port blades.