Audiounit/VST plugins not appearing in Premiere Pro CC

Hi
I recently the purchased the Slate Virtual Bus Compressor plugin bundle and was hoping to use it in Premiere Pro CC on OSX 10.8.4
Currently the plugins will not show at all in Premiere, but do show in Audition. I would have expected that they shared the same engine when it came to scanning and registering VST and Audiounit plugins.
All the other plugins by this company show and work with no problems in Premiere.
Is there any way to get Premiere to refresh the plugin list so that it 'sees' the new plugins?
I bought these plugins after I installed Premiere CC so maybe that has something to do with it?

PrPro has more limited use of VST's, than full audio-editing programs, like Audition.
In very general terms, there are three "types" of VST's, relating to PrPro:
Those VST's that can load and be used by PrPro
Those VST's that can load, but cannot be used by PrPro (in older versions, the user got a one-time warning about such VST's. Not sure if the warnings still exist. Basically, the message stated "PrPro can load this VST, but cannot use it."
Those VST's that cannot be loaded (so cannot be used either), and will often cause PrPro to hang on launch. PrPro writes a "blacklist," at each failure, so that it does not try to load that VST again.
It will probably take a response from an Adobe Developer, to tell us exactly what some VST's load and work fine in PrPro, but others cause issues, or just do not show up.
Good luck,
Hunt

Similar Messages

Installed new Font types but they do not appear in Premiere Pro

Hey there,
just wondering if you can help me I am doing product videos for a company and I downloaded some free fonts in order to have a wider variety. I downloaded them installed them and dropped them in the Font folder (I am working with a windows 7)
I wanted to create a title page and take a font that I had downloaded beforehand (I downloaded around 20 of them) but not one of them appears in my font library.
Does anyone know why this can be?
Greetings,
Mascha

Yes do appear in MS Word I just checked.
I have installed the Premiere Pro program on my account and I have another local server of the company where I have to sign in individually. If I check there on Word the font types do not appear!
Could it be that the settings of Premiere Pro are taking the font settings of that local server instead of my account even though I have installed the program there?
That's the only solution that I could actually think of, but even then I do not know how to fix it..

I updated my mac's OS to Yosemite and now my eye drop tool will NOT work inside premiere pro. Can anyone help me fix this issue?

The eyedropper tool for selecting colors to key out or to fill text will not work inside premiere pro, this error started when I updated my mac os to yosemite.

Hi Transportation,
Does the error occur in OS X 10.9? If not, why not remain at OS X 10.9? Is it necessary to run OS X 10.10?
The general rule of thumb is that when you are running software that is no longer tested or supported on a new operating system, you have to prepare for anomalies like this. You may want to install a separate bootable hard drive with OS X 10.9 on it so you can continue running that software more reliably.
Hope that helps,
Kevin

Downloaded Acrobat Assistant but the window with language option does not appear and Acrobat Pro II free trial does not download. Why?

Downloaded Acrobat Assistant but the window with language option does not appear and Acrobat Pro II free trial does not download. I have signed in successfully. Why?

Hi irenedix,
After Adobe Download Assistant is installed, you can start it at any time and select a product to download at the bottom of the window. The list updates as new products become available to download with the Adobe Download Assistant.
Please refer : http://helpx.adobe.com/x-productkb/policy-pricing/download-assistant-faq.html#main_How_do_ I_download_a_trial_version_of_Creative_Suite_or_Elements_software_
Alternatively you can try downloading it from the direct download links available at: http://helpx.adobe.com/acrobat/kb/acrobat-downloads.html
Regards,
Rave

Camera RAW plugin, filter, importer for Premiere Pro CC

I've been using it now in Photoshop CC for H264 (5D) video clips and the results were amazing. But the process to export it to Photoshop as video file, do a color adjustment, render it and import back to Premiere is very long. And if to compare to SpeedGrade, the results look better In Camera RAW, and the interface of the plugin is much more simple and "friendly".
So why it can't just be inside Premiere (like Three Way Color Correctior) in effects section for example?
Also the ability to import DNG's from Blackmagic Cameras or Magic Lantern RAW (5D3) using such plugin would be amazing! I've seen a "preview4" demo of Adobe DNG importer and it's really cool, has a Camera RAW source settings but crashes very often in Premiere CC
Will there be a future development of this technology?

That may be partially true, but not entirely. I know for a fact that some of the things I have requested have been implemented. Not because I asked for them, but because a lot of people did. I have also received emails from Adobe employees saying "Great Request! I want that too. I will make sure it gets on the list."
I have also received emails telling me I am not the only one asking and I should feel free to read between the lines.
I'm just saying that if you have a great request that they also want - remember they can't just automatically add stuff they want for themselves just because they are users also - you might get fast tracked. Or if you are one of many, you have a good chance at seeing it happen.
In this case, keep in mind that Camera RAW just became a filter in Photoshop recently. It is an amazing and extremely welcome development, but it is new. If we mounted a campaign to get it into Premiere Pro, and got enough users behind it, perhaps we could get it done. In order to do that, we would probably have to make some amazing videos using Photoshop to do the job, post them, and then get people excited by the possibilities. As it stands, most of the Premiere Pro users have no idea what I am talking about. Why would they unless they are also photographers? I would not have known if it had appeared this time last year - before I bought my GH3.
Everything you can do in Camera RAW you can do other ways as far as I can tell, but Camera RAW makes it so easy it is obvious to me that you are correct in asking for it in Premiere Pro. I haven't used it much, so I have not experienced the speed issues. I will see what I can do to play around with it over the next few days and see if I can determine a faster workflow. My guess is that you start with Camera RAW, open it in Ae and use Dynamic link to put it into Premiere Pro, but that is just a guess.It might require the use of a digital intermediate. Put the entire clip into Photoshop, change the settings and go to bed. Wake up in the AM and export. Let's see if we can experiment a little - everyone can help.

Adobe Media Encoder Dynamic Link Server NOT CONNECTING to Premiere Pro

I have Media Encoder CS5, as part of the Creative Suite 5. My programs say that I have no updates to install, so everything is up to date.
I am having an issue with the dynamic link server.
Here's what has happened thus far.
Recently when I have tried to encode a project sequence from Adobe Premiere Pro it DOES NOT work. This is the first time that has happened.
I repeated the process and again, it still happened, unable to connect to the Dynamic Link.
The Error messages that I was getting was "could not read from source. Check if it has been moved or been deleted"
Once, I received this, I went to check to see if all files were linked properly, and they were. Everything was rendered and all was good in the timeline and the project itself.
Yet, again, the error message appeared.
Then I tested a previous project that I knew had been exported and worked through Adobe to Media Encoder. And all the files were linked properly and yet again received the error message I wrote above.
Then I thought the Dynamic Link itself wasn't working properly, so I tested importing an Adobe After Effects Comp into a Premiere Timeline and it DID WORK.
Then I went and tested if a video file of an already exported project would be able to sync to Media Encoder. And this WORKED.
I then went to add the file directly from Media Encoder and when I went to add a sequence from a saved Premeire File, it would take about 5 minutes "Connecting to Dynamic Link Server", to then state, "Connecting to Dynamic Link Server Failed"
My question is, how do I fix the dynamic link between Media Encoder and Premiere? Because, additionally, importing and After Effects Sequence works with Media Encoder.

I've been searching/troubleshooting for days, none of the firewall, new shortcuts in folder, antivirus, you name it I tried it even wiped my system which seemed to work at first..
What did it for me in the end was I had Dxtory (a software recorder, for recording gameplay) running on startup, and somehow it interfered with only Premiere projects in Media Encoder, I could still import AE projects go figure.
Check all the programs you have running or use sometimes, if they have some sort of hook into other programs/deal with video/codecs this could be your problem too!
Thanks to everyone trying to solve this problem!
-JonOfAllGames

Smart rendering for DNxHD quicktimes not working in Premiere Pro CC

Hi if I understand things correcty PPCC should be able to smart render DNxHD codec in a quicktime wrapper back . If so this does not appear to be working. I am noticing small differences if I pull in a DNxHD quickitme clip in to Premiere and just render straight back out again no effects just cuts as DNxHD Quicktime. My sequence is set up to be the same as the codec. Although I do notice that trying to set the exact settings for the quicktime codec is not easy as it resets back to the defaults of DNxHD 220 59.94i so maybe this has something to do with it and their is no option to choose the MXF setting for my medi a as Adobe have neglected to make a DNxHD115 preset.
If you look on the YC waveform you can see the changes occuring when you compare the two side by side. This however does not happen if you render out as Opt1a MXF as it does appear to smart render and when ingested back in you see no difference with the source DNxHD clip. I also notice that when you choose the Opt1a option it has an extra check box for smart rendering.
Anyone noticed this. It all works perfectly for ProRes quickitmes so just wondering why its not working for DNxHD quicktimes.
Simon

Hi Simon,
Here's what I have for you:
Smart Render support for DNxHD wrapped in QuickTime was added in Premiere Pro CC
You must have Avid codecs installed
No option to check to enable smart rendering is needed, Premiere Pro always tries to smart render by default
The first thing I would check is to see if the DNxHD (QuickTime) codecs are installed or not.
Thanks,
Kevin

Markers made in Prelude not appearing in Premiere

I've added some markers to video files in Prelude and I'm not seeing those markers appear in Premiere (where I'm using the same associated files in a sequence). Anyone know how to get the markers to appear?

Hi Jon -
Yep! I see the speech markers. I forgot to mention the second special case of marker handling that differs between Prelude and Premiere Pro - and that would be with Speech markers.
Premiere Pro has a powerful workflow in their Metadata Panel. There is a Speech Analysis section in that panel that will display your speech markers. The Speech Transcription marker workflow as originally designed for Prelude and Premiere Pro was based on running the automated Speech-To-Text feature. This generates individual markers for each spoken word. When this is done you will be able to see each word highlight in the Metadata Panel as the video gets to that part of the clip. You can also set IN and OUT points and edit clips based on the spoken words. Very cool.
In your case it looks like you used the Speech Markers as placeholders for entire phrases. While this will still show up in Premiere pro's Metadata Panel the words will not be so much in sync (because each word is not assigned a timecode, only the beginning of the phrase has a timecode).
I would suggest using COMMENT markers to hold your manually transcribed phrases spoken by your actors. These will show up in Premiere Pro as standard markers in all the places I mention above.
Let me know how you make out on these.
Regards,
Michael

Apple ProRes HQ files (converted from HDV) will not play in Premiere Pro

I was working on a project in premier pro and finished a draft on 12/24 with no issues. I took these file directy from their coverted state as .mov files into the PP project and edited on the timeline with no issues. Shut down on 12/24. Opened project today, none of the files from the HDV converted format will play correctly OR export correctly. They are all Black video and still contain the right audio.
As a side note here, this is the same for trying to play the file in Quicktime AND in Apple's Final Cut Pro 7.
The only files affected are those that were uploaded and coverted to Apple ProRes HQ from the HDV format.
Again, this was working and functioning fine un Tuesday, now they appear black in the timeline and viewers.
Only change made to ANYTHING on my iMac is: Updated iTunes on Tuesday after I had closed the project from Premiere Pro.
Please help!!!
Thankyou,
Clede

Only change made to ANYTHING on my iMac is: Updated iTunes on Tuesday after I had closed the project from Premiere Pro.
Sounds like a clue.
Apple / Mac updates have a history of creating issues and plenty of evidence supports that statement.
My guess its a QT version issue.

Why won't my Prelude Rough Cut material appear in Premiere Pro?

I've done everything accordingly. I have my Rough Cut ready, but everytime I go to send it to Premiere Pro, it fails to do so.
What am I missing here? Is it my directory location that's the problem? I have no idea as to why it won't do as I say.

I'll get the image once I can obtain it - it's not appearing atm.
I have CS6 for both programs.
Yes, nothing happens when it's empty. There is a failure with the connection between the softwares. I also had this problem with trying to transfer files from Premiere to Speedgrade a while back. I never did find out the problem.
Is there a central hub or connecting device that provides this operation, because I have a feeling that that is what's stopping it from operating correctly.

Blackmagic ultra studio sdi not working with Premiere Pro 8cc or A.E.cc(2014) on win7 GT630m i7 laptop - But works in A.E.cc(12.2.1.5)

There's a problem with the new update, as I no longer can use my BM Ultra Stdio SDI for monitoring. It let me select it but no image just black frame, with the new premiere pro cc 8 or a.e. cc (2014)
But i have No Problem in A.E. cc (12.2.1.5) work find just like it should, So what has happen here ? My system is Win7 Ultmate Laptop i7 Toshiba Satellite p850, dual gpu's GT630m & Intel HD 4000
With the latest blalckmagic drivers installed (10.1.1) This needs to be looked into, there is no way of monitoring accurately .

Problem Solved! (with a small catch)
While searching crashing issues I came across this thread,"Premiere Pro random crashing since update to 2014.2"
Marc_Lec Answered (and I paraphrase here)"...I had the same problem and this is what I did. In 'Preferences Memory' I increased the memory reserved for other application to at least half the installed and changed the optimize render from 'performance' to 'memory."
Thank You Marc_Lec for what has been a game changer for me since my last computer and the beginning of PremiereCC problems.
I changed my Memory reserved for Other Applications from the default 7gigs to 1/2 of my approx.31 available Gigs = 16Gigs. Viola!
No more crashing what-so-ever!
I still have to purchase an older GTX 980 graphics card to take advantage of Adobe's approved code to utilize X=Cuda Cores and GPU, but I think I'll hang onto my new TitanX, in hopes that Adobe will write code and approve it someday in the near future.
Now why doesn't Adobe say this officially about Memory Settings? (I don't know maybe they do and I missed I somewhere)
Mine and probably many peoples computers problems here on this board may be attributed to a simple Memory adjustment, because the computer needs more than 7Gigs to run itself, not to mention Premiere.

Media Encoder not starting from Premiere Pro

I'm having issues Exporting from Premiere Pro - I'd rather queue it through Media Encoder so I can move onto the next edit, but when I select Queue and Media Encoder opens, it doesn't do anything - simply sits there with "Not Currently Encoding" as opposed to importing the data to export.
Help?
Adobe Media Encoder, 6.0.2.81
Also installed other CC products Ps, Pr, Id, Lr, Ai, etc
I have run Adobe Updater but no updates available for Me.
Mac OS X 10.7.5 (Lion)
I am using Adobe Media Encoder through a Creative Cloud Membership subscription
Project is 6 minute film shot on Sony FS700 (AVCHD) and exports from Premiere Pro
No error message, just no action from the Application
Have not seen the problem before - most of my work is vi Canon 5D MK III, so maybe it's a Sony Codec issue? Though I have exported footage from this camera before though...
Apple MacBook Pro, 17",
I am using Mercury Playback Engine GPU Acceleration in Premiere Pro
Cheers

Finally got fed up and rang Adobe (if all else fails...)
Video Support Team Member opened my Library folder (Go\Go to folder...\~/Library/) then went into \Preferences\Adobe\Adobe Media Encoder\ and changed the folder called 6.0 to 6.0old (i.e. rename it to anything else), then hit Queue in Premiere Pro and the project successfully opened in Media Encoder and was able to start encoding.
Hopefully that helps someone else suffering the same issue!
Ollie

Adobe Camera Raw changes not reflecting in Premiere Pro

I was super excited to try out the new CNDG support in Premiere Pro CC 2014, but I have to be honest - I am a bit disappointed...
I am using 16bit Cinema DNG files and the source settings sliders really aren't doing it for me (notice the pink highlights)
That's alright though, I would much rather use Adobe Camera Raw!
Right click > Edit Original
There we go, that looks nice - no pink highlights, nicely recovered details in the shadows and highlights.
PERFECT, click DONE!
Nothing...For whatever reason, changes are not reflecting.
Adobe - please allow us to use Adobe Camera Raw, there are so many folks out there that want to incorporate it into their workflow. I have tried SpeedGrade and various other color correcting tools and I have found Adobe Camera Raw to work the best IMHO
Thank you for your time.
-Loyal Paying Customer

Hi Ekombokom,
ekombokom wrote:
Hello! I too am having this same problem. I used Camera Raw (both in Bridge and Photoshop to make sure) to adjust and correct the Cinema DNG files I shot with my BMPCC; however, the video sequence in Premiere does not reflect any of the changes made. Why would Adobe not support Camera Raw settings in Premiere?
Sorry, but Premiere Pro does not have a camera raw importer. You adjust the settings in the Source Settings dialog box instead (for RED, ARRI Raw, BMCC and BM Pocket Camera DNG files). You do have access to some controls for these formats, but in some cases, Camera Raw has more controls.
ekombokom wrote:
Camera Raw is an amazing tool for refining an image and gives me the best results compared to SG and Davinci. I was so excited to be able to use it once Premiere supported CinemaDNGs but now I'm confused as to why it's not supported.
Cinema DNG from the Blackmagic Cameras are supported, you just adjust settings in Source Settings, as I mentioned. Have you tried that? The reasoning behind this is that Cinema DNG video coming from camera raw is too difficult to playback and edit with.
That said, some users bring Cinema DNG footage to After Effects, adjust the video there, then render out files that are suitable to edit with.
ekombokom wrote:
I thought the point of using Adobe was that all their products worked together seamlessly? I really hope they fix this.
You can always make a request here: http://adobe.ly/feature_request, however, I don't see a camera raw importer going into Premiere Pro any time soon (if ever) because of the reasons I previously mentioned (editing with camera raw would be too cumbersome). I think the more realistic feature request would be to add more controls in Source Settings.
Thanks,
Kevin

Premiere Elements 8 - "not compatible with Premiere Pro"?

I have installed, uninstalled, and reinstalled Premiere Elements 8 program twice. Updated to 8.01. When I save a "new project" file, then try to open it with the same program I created it with (Elements 8), it will not open the file and says: "Projects created with Adobe Premiere Pro and Adobe Elements are not compatible." What is going on? I don't have Premiere Pro, so how could I create a file with it?
Thanks for any help you can provide.
Susan

Try working through the following process from Adobe: Troubleshoot damaged projects | Adobe Premiere Elements
Cheers,
Neale
Insanity is hereditary, you get it from your children

Red Epic Importer not working in Premiere Pro 5.52 (what am I doing wrong?)

Hello:
I installed latest version of Adobe Premiere Pro 5.52 this week.
I immediately downloaded the RED EPIC Importer updates found here:
http://labs.adobe.com/technologies/r...details#tabTop
I believe I followed the directions accurately…After the installation I rebooted my Mac Pro...
When I tried to import the R3D sample files, I still received the same "corrupt file message" --even after installing the RED EPIC importer files
To be certain, I have reinstalled the RED EPIC Importer update several times----same error message…
My question: Do I need to clear a cache file, restart Premiere (while holding down a key) or do something else to make this work?
Forgive me for asking something that has been covered at length already -- I just don't see an answer....
Thanks,
Frank

I think I am seeing the same thing - or I am not doing something right.
Brand new Windows 7 machine with quadro4000.
CS5.5
HOWEVER> one workaround I think is to open the footage using the "view as" menu set to FILE DIRECTORY.
BUT I think this removed the HDR functionality that I get when I open the clips in Cine-x.
I thought that perhaps this was related to the initial transfer to our storage via a Mac platform and then copied over to our windows machine - but now I am not so sure.
I am pretty sure I also installed the drivers/importer files correctly, as I have done it twice now as well.
Anyone else having this issue?
Are we supposed to use a different workflow to bring the EPIC footage into a sequence?
S

Audiounit/VST plugins not appearing in Premiere Pro CC

Similar Messages

Maybe you are looking for