Audit Browser(Urgent)

Hello All,
How can configure Audit browser in OWB 11G?
I configured Repository Browser.
Reg,
S.Gyazuddin.

The Repository Browser in OWB 11g includes the Audit Browser, so the Audit Browser shouldn't need any separate configuration. What problem are you experiencing?
Nigel.

Similar Messages

Process flow execute "complete" in Runtime Audit Browser but it hangs

I create a process flow that contain 4 sub-process flow, each sub-process flow contains several mapping. Each mapping in the process flow will be executed one by one if previous mapping execute successfully. If any error or warning, it will be ended with "End_Error" or "End_Warning". And I deploy the process flow to the workflow server successfully.
Sometimes the process will hang in some certain mapping when execute the process flow. After long time waiting, the status of process flow execution in Audit Browser will be "Complete", but in fact, the sub-porcess ended with that mapping and the next mappings will not be execute. This can be monitored in the Audit browser, as if the whole process "break" at that mapping.
In workflow monitor, I found the workflow has not complete yet. The status of that mapping node is "Notified", not "complete". So I have to abort the workflow in the monitor.
Sometimes when I try again it will be ok. If I deploy the process to another instance that in dw instance, it will also be ok. The dw instance use owb recommend parameters when we install db instance. All the mapping use the default parameters except "Default operation mode", here we use "row based".
Can somebody give me some hint?
Thanks.
OWB 10g rel 1, db: 10g rel2, workflow: 2.6.4

Hi Naidu
Yes you are absolutely right. When you press the cancel button in the GUI, the runtime repository does not get the signal that he is been asked to stop and abort. The GUI cancels himself but the background oracle process is still on !!!. The only way to do is to kill the oracle session. Another way I tried to tackle is
go to the directiry OWB/10.1/owb/rtp/sql and run the file @list_request.sql in sqlplus. Note that you have to login as runtime repositiry owner. After you get the audit id, run the file abort_exec_request.sql and supply the audit id that you obtained by running list_requests.sql. Sometimes it does not work also . Hence the best method is to kill the process

What has caused "data error count" under execution detail on Audit browser

Hi,
I have a simple mapping that load data from external table to target fact table. From OWB Runtime Audit browser, the Execution Details page show the status= Complete + <Red error sign>. And the value under Data error count is 2563. Where can I look for information about what has caused this errors or what the data error are? The SQL*Loader log file looks OK and no bad file generated. And I don't see suspecious under WB_RT_AUDIT*, WB_RT_ERROR tables It's owb9ir2 on 9iDB Thanks.

Solved. I set the audit level to the highest and re-executed and can see the error msg now. It would be nice if audit broser can show the report for all the rejected rows.

Problems with the OWB Runtime Audit Browser

I executed some mappings in my project
I go to the Client Browser Version of the OWB Runtime Audit Browser (before I Started OWB OC4J Instance).
I specified the Runtime Repository connection information and click in View
Deployment Report or View Execution Report, but, when I access to the Runtime Repository I dont see any data in the web page.
I probed with differents filters but I didnt see data!!!
What is the problem?

Hi Mark,
Yes, I am sorry, I wanted to say 'I do not see any data', but when I connect (using the access user credentials and the QA User role or any other role), and click 'view execution report' I do not see any data!!!! I dont have any data in the table (Only the name of the repository), I drill down to the details of the execution but I do not see any data!!!
In the Filter Options section are the mappings in a combobox (Execution Filter) but I do not see any data about its!!!
Besides, for example If I execute the query in SQL PLUS: select * from ALL_RT_AUDIT_MAP_RUN_ERRORS.
It has 581 rows
What happens?
Why I dont see any data?
Thanks!

OWB Runtime Audit Browser has no respond

Hi All,
After I started the "Start OWB OC4J Instance" and at the console, it shown:
Oracle9iAS(9.0.2.0.0) Containers for J2EE initialized.
Then I start the "OWB Runtime Audit Browser", and saw the Warehouse builder browser , Runtime Repository Report Web page prompt up. It then don't show any respond, whatever I input to the login information and click view report buttons. Does anything that I must set in order to make it work? and how could I turn the verbose of OC4J Apps on, to view more debug message?
background information : I already could run mapping and process flow at my enviornment.
Thx for your kindly help.
Rds,
CH

Provide the following information in the Design Client login page:
HTTP Server Host PORT (default 7778, use 80 for older version of Oracle HTTP)
DAD (Name of the OWB Repository you want to browse. The repository should be set up properly. The web page will then be redirected accordingly. You will need to provide the OWB Repository name and password (this is NOT your OWB login user name and password).

Runtime audit browser shows the status busy for the cancelled OWB jobs

Hi ,
I canceled long running OWB job.But the runtime audit browser was showing the status as BUSY.
I observed the the oracle session (SID:48) was running and killed the session.
After killing the session,the status in runtime audit browser changed to COMPLETED.
Till that time i was with an impression that "if we cancel a OWB job then it will kill all the sessions/process that initiated".
Could please tell me why this is happening?
Anything wrong with my configuration?
Appreciate early response.
Thanks,
Naidu

Hi Naidu
Yes you are absolutely right. When you press the cancel button in the GUI, the runtime repository does not get the signal that he is been asked to stop and abort. The GUI cancels himself but the background oracle process is still on !!!. The only way to do is to kill the oracle session. Another way I tried to tackle is
go to the directiry OWB/10.1/owb/rtp/sql and run the file @list_request.sql in sqlplus. Note that you have to login as runtime repositiry owner. After you get the audit id, run the file abort_exec_request.sql and supply the audit id that you obtained by running list_requests.sql. Sometimes it does not work also . Hence the best method is to kill the process

Error (access denied) when starting Client Runtime Audit Browser

LS,
After starting the OC4J instance, I try to start the Client Runtime Audit Browser. For a brief moment I see a DOS-box, then an IE-page appears saying the following:
======================================================
ERROR
The requested URL could not be retrieved
While trying to retrieve the URL: http://127.0.0.1:8999/owbb/RABLogin.uix
The following error was encountered:
Access Denied.
Access control configuration prevents your request from being allowed at this time. Please contact your service provider if you feel this is incorrect.
======================================================
Any idea whether this is a local problem?
I've tried applying the settings as mentioned in the configuration guide, but the Bypass option for the proxy is impossible to set since we do not use a proxy server.
Your thoughts?
Regards, Patrick

Good morning All,
Maybe I've got the wrong idea of what is all needed to be able to run the RAB locally, but I thought that starting the OC4J instance would be sufficient to get started.
In the Installation and Configuration Guide the following is mentioned:
2.7 Step 6. Configure the Web Browser for Design and Runtime Audit Browsers
2.7.1 Add "LOCALHOST" to Your Web Browser Proxy Server Bypass List
2.7.2 Configure the Cache Management in Your Web Browser
2.7.3 Configure Warehouse Builder with a Net Service Name
As said before:
@2.7.1, we do not use a proxy (according to Internet Explorer settings) therefore I can't add 'localhost' to the bypass-list, but then again I think that it does not need to be, since there is nothing to be bypassed in the first place.
2.7.2 has been implemented.
@2.7.3, I added the net service name manually to TNSNAMES.ORA (since I also needed that to be able to get on to the database using TOAD and SQL*Plus).
We do not have 9iAS integration for RAB, nor do we have OEM integration.
Are there other things that need to be implemented? Mentioned so far have been HTTP-server and RTP services, but paragraph 2.7 does not mention anything about this. Maybe there are certain services that need to be running on the server (like HTTP and/or RTP), even though I would like to run the RAB locally?
Where does one actually need RTP for?
Thanks in advance.
Cheers, Patrick

OWB Runtime Audit Browser

Hi,
I am not not able to open the Runtime Audit Browser.
Before doing the above steps ,i configured the Internet Explorer Browser as per the installation Configuration Guide documentation.I did the following settings.
I. To add "localhost" to your Internet Explorer proxy server bypass list:
     1. From the Tools menu, select Internet Options.
     2. In the Connections tab, click LAN Settings.
     3. Check the Bypass proxy server for local addresses option.
     4. Click OK.
II. Configure the Cache Management in Your Web Browser
We must set the cache management on your Web browser for any client you use to
access the Design and Runtime Audit Browsers.
To configure the cache management in Internet Explorer:
1. From the Tools menu, select Internet Options.
2. In the General tab, in the Temporary Internet files section, click Settings.
3. For the Check for newer versions of stored pages option, select Every visit to
the page.
4. Click OK.
3. Configured Warehouse Builder with a Net Service Name
I did start the Runtime OC4Z instance before opening the Runtime Audit Browser.It is opening the empty page.
I am getting the following error in OC4Z instance:
Error starting the HTTP-server:network subsystem failed:JVM_Bind.
Thanks for your help.
Vinay

If you are running everything locally, you should have to start the OC4J instance from the OWB menu and run the RAB from the same menu. In the RAB login page you should enter the runtime repository user name and password, the machine name where you are running the DB, the DB port number and the db instance name. It should work without problems.
What version are you using and what is your configuration (do you run everything on your PC?).
Regards:
Igor

Runtime Audit Browser - Step Type

Hi,
Why are not all Steps shown in the Runtime Audit Browser.
Sometimes only Aggegator shows up, and at other times something else shows up.
Can somebody expllain this behaviour.
- Jojo

You want detail about data?
It depends on the role you've selected when entering audit browser. If you want data detail, you should choose the QA User role.
I don't know if it's possible to configure the operator you want to have more detail about it. Have you tried altering the default audit level for this mapping?
For info about the runtime audit browser, read the "Viewing Runtime Repository Reports" section in OWB User Guide.
Regards,
Marcos
Message was edited by:
Marcos Spínola

Unabe to get the audit browser

I am starting the OWB OCJ instance and when i am runnig the audit browser , iam getting the page not found page displayed , can any one know what exaxtly is happening
Thank you

Which version of OWB are you using?
Which operating system are you using?
When you click on the link start the audit browser, in Windows a command window should open and an OC4J service should start. Are there any error messages whe the service starts? When you try to connect to this service via your browser all error messages should be recorded in this window. Are there any error messages listed?
Are you running your browser on the same machine as the OC4J service - this all has to run on the same machine, don't try running the OC4J service on one machine and then connecting to the service from another.
Keith

Runtime audit browser

Hello,
I want to delete runtime audit browser data. How to do that? One way is once we revome that repository and recreate then audit data will go. But here I don't to remove repository. If somebody knows please explain how to remove runtime audit browser data.
Thanks
Santi

I used following SQL query to clean up the audit information. But still doen't clean up all the audit info. Any idea why it can't clean up everything?
BEGIN
FOR purge_ids in (select distinct EXECUTION_AUDIT_ID id
from rep_owner.ALL_RT_AUDIT_EXECUTIONS
where updated_on < to_date('09/14/2007', 'MM/DD/YYYY')
LOOP
dbms_output.put_line('Purging ID: '|| purge_ids.id);
rep_owner.wb_rt_api_purge.purge_execution(purge_ids.id);
END LOOP;
END;

Applet notinited .. it runs in eclipse, but not in web browser --urgent

hi,
firstly i'm sorry for the "urgent" remark in the title, but I actually really need some help to this problem, since I have to pass up this assignment in about 2 more hours.
on to the question,this is my full code:
import java.awt.BorderLayout;
import java.awt.Color;
import java.awt.Container;
import java.awt.GridLayout;
import java.awt.event.ActionEvent;
import java.awt.event.ActionListener;
import javax.swing.*;
import javax.swing.event.DocumentEvent;
import javax.swing.event.DocumentListener;
public class reza extends JApplet{
     public static void main(String[] args){
          JFrame myWindow = new JFrame("Sample reza");
          myWindow.setDefaultCloseOperation(JFrame.EXIT_ON_CLOSE);
          reza testReza = new reza();
          myWindow.setContentPane(testReza);//add to the window
          myWindow.pack();
          myWindow.setVisible(true);
     double sum;     //sum of values entered by user
     private ImageIcon board;
     private JPanel topPanel,boardPanel;
     private JLabel l1,l2,l3,l4,l5,l6,lTotal,lAndryusha,lBorya,lVolodya,lGiveUp,lGiveUp2,boardLabel,lRules;
     private JTextField a[],aTotal, b[], bTotal, c[], cTotal;
     private JButton clear,checkAnswer,solve;
     private Container container;
     String A1,A2,A3,A4,A5,A6,ATOTAL,B1,B2,B3,B4,B5,B6,BTOTAL,C1,C2,C3,C4,C5,C6,CTOTAL;
     public reza(){
          container = getContentPane();
         container.setLayout(new BorderLayout());
         topPanel = new JPanel(new GridLayout(6,8,5,5));
         boardPanel = new JPanel(new GridLayout(1,2,5,5));
         board = new ImageIcon("board.jpg");
         boardLabel = new JLabel(board);
         topPanel.setBackground(Color.WHITE);
         boardPanel.setBackground(Color.white);
         //utk handle button clear ngan solve
         ButtonHandler handler = new ButtonHandler();
         lGiveUp = new JLabel("           Give up?");
         lGiveUp2 = new JLabel("Press this >>>");
         lRules = new JLabel("Rules: User may only use the number shown in the dart board");
         l1 = new JLabel("   1");
         l2 = new JLabel("   2");
         l3 = new JLabel("   3");
         l4 = new JLabel("   4");
         l5 = new JLabel("   5");
         l6 = new JLabel("   6");
         lTotal = new JLabel("   Total");
         lAndryusha = new JLabel("Andryusha");
         lBorya = new JLabel("Borya");
         lVolodya = new JLabel("Volodya");
         a = new JTextField[7];
         b = new JTextField[7];
         c = new JTextField[7];
         aTotal = new JTextField();
         bTotal = new JTextField();
            cTotal = new JTextField();
            clear = new JButton("CLEAR");
         solve = new JButton("SOLVE");
         checkAnswer = new JButton("ANSWER");
         topPanel.add(new JLabel("       "));
         topPanel.add(l1);
         topPanel.add(l2);
         topPanel.add(l3);
         topPanel.add(l4);
         topPanel.add(l5);
         topPanel.add(l6);
         topPanel.add(lTotal);
         topPanel.add(lAndryusha);
         int i=1;
         for (i=1;i<=6;i++){
              a[i] = new JTextField();
              a.getDocument().addDocumentListener(new textFieldListenerA());
          topPanel.add(a[i]);
     topPanel.add(aTotal);
     topPanel.add(lBorya);
     for (i=1;i<=6;i++){
          b[i] = new JTextField();
          b[i].getDocument().addDocumentListener(new textFieldListenerB());
          topPanel.add(b[i]);
     topPanel.add(bTotal);
     topPanel.add(lVolodya);
     for (i=1;i<=6;i++){
          c[i] = new JTextField();
          c[i].getDocument().addDocumentListener(new textFieldListenerC());
          topPanel.add(c[i]);
     topPanel.add(cTotal);
     clear.addActionListener(handler);
     solve.addActionListener(handler);
     checkAnswer.addActionListener(handler);
     topPanel.add(new JLabel(" "));
     topPanel.add(new JLabel(" "));
     topPanel.add(new JLabel(" "));
     topPanel.add(new JLabel(" "));
     topPanel.add(new JLabel(" "));
     topPanel.add(new JLabel(" "));
     topPanel.add(clear);
     topPanel.add(solve);
     topPanel.add(new JLabel(" "));
     topPanel.add(lGiveUp);
     topPanel.add(lGiveUp2);
     topPanel.add(checkAnswer);
     topPanel.add(new JLabel(" "));
     topPanel.add(new JLabel(" "));
     topPanel.add(new JLabel(" "));
     topPanel.add(new JLabel(" "));
     boardPanel.add(boardLabel,BorderLayout.WEST);
     boardPanel.add(lRules,BorderLayout.EAST);
     container.add(boardPanel,BorderLayout.NORTH);
     container.add(topPanel,BorderLayout.CENTER);
     setSize(750,700);
     setVisible(true);
     class textFieldListenerA implements DocumentListener{
          public void insertUpdate(DocumentEvent e){
               int i,count=0;
               for (i=1;i<=6;i++){
                    try{
                         count = count + Integer.parseInt(a[i].getText());
                    }catch(Exception e1){
               aTotal.setText("" + count);
          public void changedUpdate(DocumentEvent e){
          public void removeUpdate(DocumentEvent e){
     class textFieldListenerB implements DocumentListener{
          public void insertUpdate(DocumentEvent e){
               int i,count=0;
               for (i=1;i<=6;i++){
                    try{
                         count = count + Integer.parseInt(b[i].getText());
                    }catch(Exception e1){
               bTotal.setText("" + count);
          public void changedUpdate(DocumentEvent e){
          public void removeUpdate(DocumentEvent e){
     class textFieldListenerC implements DocumentListener{
          public void insertUpdate(DocumentEvent e){
               int i,count=0;
               for (i=1;i<=6;i++){
                    try{
                         count = count + Integer.parseInt(c[i].getText());
                    }catch(Exception e1){
               cTotal.setText("" + count);
          public void changedUpdate(DocumentEvent e){
               int i,count=0;
               for     (i=1;i<=6;i++){
                    try{
                         count = count + Integer.parseInt(c[i].getText());
                    }catch(Exception e1){
               cTotal.setText("" + count);
          public void removeUpdate(DocumentEvent e){
               int i,count=0;
               for (i=1;i<=6;i++){
                    try{
                         count = count + Integer.parseInt(c[i].getText());
                    }catch(Exception e1){
               cTotal.setText("" + count);
     private class ButtonHandler implements ActionListener{
          //handle button event
          public void actionPerformed(ActionEvent event){
               //clear all the text fields
               if (event.getActionCommand().equals("CLEAR")){
                    int i=0;
                    for (i=1;i<=6;i++){
                         a[i].setText("");
                    aTotal.setText("");
                    for (i=1;i<=6;i++){
                         b[i].setText("");
                    bTotal.setText("");
                    for (i=1;i<=6;i++){
                         c[i].setText("");
                    cTotal.setText("");
               else if (event.getActionCommand().equals("SOLVE")){
                    int aCount[],bCount[],cCount[],i,aTotal=0,bTotal=0,cTotal=0;
                    aCount = new int[7];
                    bCount = new int[7];
                    cCount = new int[7];
                    //make sure all fields have been filled in
                    if (a[1].getText().equals("") || a[2].getText().equals("") || a[3].getText().equals("")|| a[4].getText().equals("")|| a[5].getText().equals("")|| a[6].getText().equals("")|| b[1].getText().equals("")|| b[2].getText().equals("")|| b[3].getText().equals("")|| b[4].getText().equals("")|| b[5].getText().equals("")|| b[6].getText().equals("")|| c[1].getText().equals("")|| c[2].getText().equals("")|| c[3].getText().equals("")|| c[4].getText().equals("")|| c[5].getText().equals("")|| c[6].getText().equals("")){
                         JOptionPane.showMessageDialog(null,"Please fill in ALL the scores!!");
                    //if yes, then only proceed
                    else{
                         //for andryusha
                         for (i=1;i<=6;i++){
                              try{
                                   aCount[i] = Integer.parseInt(a[i].getText());
                                   aTotal = aTotal + aCount[i];
                              }catch(Exception e1){
                         //check andryusha's 1st and 2nd shots. They must be equal to 22 when added
                         if (aCount[1] + aCount[2] != 22){
                              JOptionPane.showMessageDialog(null,"Andryusha's 1st + 2nd shots must be equal to 22!!");
                         if (aTotal==71){
                              JOptionPane.showMessageDialog(null,"Andryusha's scores is right! Well done!!");
                         }else if (aTotal !=71){
                              JOptionPane.showMessageDialog(null,"You got it wrong for Andryusha's scores. Please try again.");
                         //for Borya
                         for (i=1;i<=6;i++){
                              try{
                                   bCount[i] = Integer.parseInt(b[i].getText());
                                   bTotal = bTotal + bCount[i];
                              }catch(Exception e1){
                         if (bTotal==71){
                              JOptionPane.showMessageDialog(null,"Borya's scores is right! Well done!!");
                         }else if (bTotal !=71){
                              JOptionPane.showMessageDialog(null,"You got it wrong for Borya's scores. Please try again.");
                         //for Volodya
                         for (i=1;i<=6;i++){
                              try{
                                   cCount[i] = Integer.parseInt(c[i].getText());
                                   cTotal = cTotal + cCount[i];
                              }catch(Exception e1){
                         if (cCount[1] != 3){
                              JOptionPane.showMessageDialog(null,"Volodya's first score is wrong!!");
                         if (cTotal==71){
                              if (cCount[2] == 50 || cCount[3] == 50 || cCount[4] == 50 || cCount[5]==50 || cCount[6]==50){
                                   JOptionPane.showMessageDialog(null,"Volodya's score is right! Well done!!");
                              }else if (cCount[2] != 50 && cCount[3] != 50 && cCount[4] != 50 && cCount[5]!=50 && cCount[6]!=50){
                                   JOptionPane.showMessageDialog(null,"Volodya hits the bull's eye once!!");
                         }else if (cTotal!=71){
                              JOptionPane.showMessageDialog(null,"Volodya's score is wrong!!");
               }else if(event.getActionCommand().equals("ANSWER")){
                    a[1].setText("20");
                    a[2].setText("2");
                    a[3].setText("25");
                    a[4].setText("3");
                    a[5].setText("20");
                    a[6].setText("1");
                    aTotal.setText("71");
                    b[1].setText("25");
                    b[2].setText("20");
                    b[3].setText("20");
                    b[4].setText("3");
                    b[5].setText("2");
                    b[6].setText("1");
                    bTotal.setText("71");
                    c[1].setText("3");
                    c[2].setText("50");
                    c[3].setText("10");
                    c[4].setText("5");
                    c[5].setText("2");
                    c[6].setText("1");
                    cTotal.setText("71");
     }//end private class ButtonHandler
I run the program using Eclipse; run as> Java applet
and in runs perfectly well. I then tried running it using internet explorer and firefox, but only a gray box appeared and the browser says "applet notinited" and "Loading Java Applet Failed.."
what did i do wrong? any help is really appreciated.. thanks

thank God i already found the cause of the problem..
it's because the application has an ImageIcon which links to a local jpeg file, so perhaps security restriction on the browser doesn't allow my applet to access local file, that's why it fails to load.
either using signed applet (not tested) or removing the picture solved my problem.
thanks anyway :)

OWB 9.2 Runtime Audit Browser

Hi
In OWB 9.0x we are able to categorise maps into what runtime audit viewer called jobs. I can't seem to do the same in 9.2. I have set the Default Pruge Group accordingly but that made no difference in the browser. Can't see what this is used for.
Env
OWB 9.2.0.3.0
Oracle 9.2
Solaris + Win2k
Any ideas?
Hong

When a Process or Map is executed, the user may specify a 'job' name (otherwise it defaults to the Process or Map name).The RAB "Execution Schedule Report" displays all Process and Map execution details found in the runtime audit tables. Audit details, including the 'job' name, are listed in reverse chronological order(i.e. most recent first);filter options are available to restrict the amount of audit data shown. One of these filters allows the user to select by 'job' name, which they specified. The RAB does not use the 'purge group' setting.

OWB 10.1.0.4: Query generated by Runtime Audit Browser

Dear all,
In our OWB 10.1.0.4 project we created a process flow which runs every night. This process flow executes some mappings and some PL/SQL procedures, defined as transformation procedures in the OWB project. In the RAB the execution of all the objects in the process flow is logged, including the start and end time.
However, as we all know, opening the RAB is a bit of a hassle. Starting the OC4J, waiting for the browser to connect to the Runtime Repository... Moreover, we would like to make a report about the staging process.
That is why I need to have this information in the database. The Runtime Repository should contain all the data I need.
The thing I cannot seem to find is some audit data of our transformation procedures. In the Runtime Repository view ALL_RT_AUDIT_EXECUTIONS does not contain data of these procedures. The view WB_RTV_AUDIT_EXECUTIONS does, but there is no information about the start and end time.
Since the RAB shows me the start and end time of each executed object (mappings and procedures), I would guess this information is available in the Runtime Repository.
All in all, can anyone answer one of the following questions:
1. What is the complete query that the RAB executes when clicking on 'View Execution Report'?
2. Which object in the Runtime Repository contains audit information of the executed transformation procedures?
Thanks
Paul

But how did you identify that there are no runtime records in all_rt_audit_executions for your PL/SQL procedure?
I guess you tried to search by procedure name... (but what column you used for searching)
In my case all_rt_audit_executions and wb_rtv_audit_executions contains the same number of records, so they should be always in sync.
Oleg

Audit browser showing complete for all process flows.

Hi,
My process flows are executing success fully.
Based upon the activities I am ending the process with END_SUCCESS, END_ERROR or END_WARNING acitivities.
But here even, the process flow is ended up with END_ERROR activitiy the process flow status is shown as 'Complete'. But its not showing the final status as "Error".
In the backend, in the audit tables its showing the return status as "Failure"
Could any one please explain me, how to show its status as fialure.
Thank you,
Regards,
Gowtham Sen.

Hi,
From your description, I know you do not want to close your browser when users sign out SharePoint 2013.
As you know, “the browser has to terminate the session and clear the cache.” You can customize your sign out page by referring to this article: https://controlzet.wordpress.com/2014/02/17/sharepoint-custom-sign-out-page/.
Best Regards
Vincent Han
TechNet Community Support

Audit Browser(Urgent)

Similar Messages

Maybe you are looking for