Audit is deactivate automatically

Dear All,
After some days I have to activate Audit again thru SM19.
After activating after some days it is automatically deactivate.
Thanks and Regards,
Nirav

Apart for activating the Audit from SM19 you have to set the below parameter in your instance profile.
Also you can you can specify the location where you want to save the log
rsau/enable
rsau/local/file                 Specifies the location of the audit log on the application server.
rsau/max_diskspace_local             Specifies the maximum length of the audit log.
rsau/selection_slots        Specifies the number of selection slots for the audit.
please have a look on the below link
http://help.sap.com/SAPhelp_nw70/helpdata/en/c7/69bcb7f36611d3a6510000e835363f/content.htm
Regards,
Srinivas Chapa.

Similar Messages

Hello, How to deactivate automatic Purchase Order Output det,

Hello,
will anyone guide me the steps to deactivate automatic output determination in a Purchase Order.
Full points for the answer.

Hi Pv,
see the below links
help.sap.com/printdocu/core/print46b/en/data/en/pdf/CAGTFADM-MM.pdf
http://help.sap.com/saphelp_srm30/helpdata/en/91/41faf2c220e84c9002a4ae4cc1906a/content.htm
http://help.sap.com/saphelp_srm30/helpdata/en/91/41faf2c220e84c9002a4ae4cc1906a/frameset.htm
http://e-mory.blogspot.com/2008/03/sap-edi-inter-company-billing-automatic.html
http://www.erpgenie.com/sapfunc/purchasing.htm
thanks
sagar
reward me if usefull.

Downloaded Adobe Assistant Now What? Adobe Audition is not automatically downloading

I have installed Adobe Audition and it brings up a screen that says what products are you interested in with a drop down box, however according to instructions it states that the download of adobe audition is supposed to start automatically.
Maybe I am missing something in understanding the initial instructions.
Any help gratefully appreciated.

Troubleshoot Adobe Download Assistant
Mylenium

Deactivate automatic transfer order during PO process

hi
After transfer order ,system automatically confirmation of transfer order .i need to manual confirmation, I dont want Automatic
transfer order confirmation during PO process.
i deactivate confirmation in warehouse number,storage type, movement type. but again its happened the transfer order confrimation
with regard
dinesh

Check again in OMLX both indicators are removed. If you are still facing the issue then you may need to check any enhancement done for this purpose to override the configuration.
Or check you are using any special Movement indicator to directly putaway the material bypassing the TR & TO. Check WM view 1 for special mvt indicator
Please refer the prerequesiste for the TO confirmation. If you remove the prerequisites it should work fine. But it is not advisable to remove the Confirmation required indicator at storage type level
[http://help.sap.com/saphelp_erp60_sp/helpdata/en/c6/f83e4d4afa11d182b90000e829fbfe/frameset.htm]
[Auto Confirmation of transfer order - 999 mvt from storage type W01 to S01;
Edited by: Karthik on Aug 12, 2011 1:07 PM

Deactivate automatic content migration for Web Page Composer (WPC) 2

Hi,
on our production system we are using at the moment Web Page Composer for SAP NetWeaver 7.0. Soon we would like to upgrade the system to release 7.3
We have now already set up the content for the new Web Page Composer on a pre-production system. After the production system is upgraded to the new release, it is planned that we will transport the content for the new Web Page Composer from the pre-production to the production system.
As far as I know, the content of the old Web Page Composer gets automatically migrated during the upgrade of the production system. Due to the reason we will the use content of the pre-production system, the automatic migration step is not necessary anymore during the upgrade.
Is there any configuration option that allows us to disable the automatic migration of old Web Page Composer content?
Best regards
Mario

Regarding the feedback of the SAP support, it is not possible to deactivate the automatic content migration for the Web Page Composer.

How to deactivate automatic setting of final issue indicator in reservation

Our client has a requirement to deactivate the automatic setting of the final issue indicator after the reserved quantity on a reservation has been fulfilled.
The requirement comes from an overnight shift that does not have access to the SAP system, so the final issue indicator that is automatically set after the reserved quantity is fulfilled cannot be reset manually when the material is needed during the overnight shift.
I do not believe backflushing is an option because the material is issued to a cost center (orders are managed outside SAP) and thus there is no confirmation.
Is there a standard method for deactivating the automatic setting of the final issue indicator when the reserved quantity is reacched?
Thanks.

Bob_Smith1103 wrote:
The requirement comes from an overnight shift that does not have access to the SAP system, so the final issue indicator that is automatically set after the reserved quantity is fulfilled cannot be reset manually when the material is needed during the overnight shift.
Please see my earlier comment that the overnight shift does not have access to SAP and therefore cannot manually reset the final issue indicator until the next day when someone with SAP access is present.
Obviously the goods issue could wait until the next day, but the client is not satisfied with waiting until the next day to post-process the goods issue.

Goods Movement - Supress/Deactivate Automatic Serial Number

Hi SAPers,
Sub: How to supress/deactivate the buttonfacility "Create serial number Automatically" while goods movement.
I have assigned Serial number profile "0001" for certain materials. For any goods movement system forces to give Serial number with a dialog box pop-up (Maintain Serial number as header) in which "search for Serial numbers as search button" and "Create serial nummber automatically". I have a requirement to either suppress or deactivate the functionality of Create serial number automatically. Please advice on this issue.
Thanks
Surendra

Thanks Thyagarajan,
If I select that system doesn't ask for serial number. We have to give manually.
Let me explain you scenario.
Serial number usage should be "obligatory", and system should ask for Serial number.
We have two options on the pop-up screen, 1. Create Serial numbers automatically and 2. regular search option (as an Icon) and also there some icons like "delete", "select all" etc,.
Requirement is: User should not have access to create Serial number Automatically, user should search for the serial numbers and moreover system should force user to give serial number.
Thanks
Surendra

How to deactivate automatic photoimport when connecting to memory card...?

Hi there,
I recently installed iPhoto 6. When I connect a memory card to my powerbook, iPhoto starts up and wants to import the files. I want to do this manually and don't want iPhoto to start automatically. How can I deactivate this?
Thanks for your help.
Michael

Hi Michael,
Using Image Capture to download images and video clips:
Open up Image Capture which is found in the Applications folder.
When it is opened, go to Image Capture/Preferences
Under the General button choose
Camera: When a camera is connected, open Image Capture.
The next time you connect your camera Image Capture will open.
In the window that opens you will see an Options button. Click on that button to set your options.
To find out more about Image Capture (it can do a lot more) Click on Help in the menu bar when Image Capture is open.
iPhoto: How to Change the "Open Automatically" Preference
If you find you can't change any of Image Captures preferences or can't access any drop down menus or they are greyed out, check to make sure Image Capture is loose in the Applications folder and not within a sub folder.

Deactivate automatic reactivation after opening screen

Hello,
is it possible to deactivate the automatic reactivation after resting state by opening the screen? When yes, how?
Greetings
M. Auer

Hi Matthias
When notebook is in standby or hibernation mode after opening the display notebook will automatically wake up and display will be automatically ON.

Deactivate automatic interaction record

Hello!
I want to deactivate the automatic interaction record because each time that I do something an interaction is created, i would like to avoid it. Anybody knows how to do it??
Thanks in advance
Regards.

Hello Bitabita,
As soon as you click on End Interaction Button on top of the screen, no matter whichever screen you are on, it creates an Interaction record in the backend. This behavior is intentional by SAP for multiple reasons. If you still want to avoid creation of IR in the back end when you press End Interaction Button, you can do the following:
You must create an implementation for BADI: 'CRM_IC_IARECORD
In Method, BEFORE_IREC_CREATE , write this code at the first line:
rv_suppress_irec = abap_true.
This will make sure that your interaction record doesn't get created.
Thanks
Vishal

HT1937 How to deactivate automatic carrier selection?

For those of us who travel between international borders. How can get deactivate te atomatic option to select a network (e.g. AT&T, Sprint, Verizon)?
When I am outside the U.S., I like to select the carrier the best works for my iPhone.
The function should be under Settings > Carrier > Automatic (ON / OFF).
Need help....

I tried contacting them four times... and most underpaid workers have no idea what I am talking about. They keep referring me to Apple.
When I travel Internationally, I could use several carriers in that country. With some of them I can make and receive calls and with other I cannot.
I travel often and it ***** not being able to get or make calls.

How deactivate automatic sync in Lumia 520

Hi, I would like anyone to help me solve the following matter.
I have a problem that my phone chows up my internet data bundle even when I don't use it. I can just put my phone on a table for hours and find my data disappeared.
The other thing that would like to stop is automatic synchronization when I open OneNote. Please help a brother out! I cannot afford to pay for a lot of internet data everyday.

Switch off data in Settings > Cellular
Ensure you are connecting to WiFi wherever possible which will override cellular
Find the apps using much data and remove or disable their acces (usually the backround process). You can find this information in the Datasense application
Unless you have a minute (as in below 100MB/month) data limit I would not worry about any sync action as the used data is really minimal. I just went abroad for Xmas and only stopped automatic uploads of photos in Settings>backup while leaving any data/mail syncing active and did not use ore than 5-7MB/day
Click on the blue Star Icon below if my advice has helped you or press the 'Accept As Solution' link if I solved your problem..

BSP runtime node got deactivate automatically after changing Handler list

Hi folks,
We made a change in Handler list of BSP node ( Default_host/sap/bc/bsp) in SICF T code. So basically we added our own Z BSP HTTP Request Handler class into the Handler List just before the standard class CL_HTTP_EXT_BSP.
Everything worked fine in Developement, but after moving the change to Quality system, the BSP node automatically got deactivated and we had to activate it again manually.
What we are wondering is that, why the node got deactivated? Dit it get deactivated because of the change in Handler list or it might had happend because of some other reason?
Please provide your openion on this issue.
Thanks
PG

Hi Joaquin
Thanks for your reply.
So does it mean, when we will move this new TP request to Production system, there also BSP runtime node will be deactivated automatically?
And does thtis issue occurs only when there is a transport touching the BSP runtime? Since it did not occur before with other Transports!
Thanks
PG

How to schedule a batch job to generate security audit log (SM20)

May be this is a repeat question for this forum. Apologize, if it is. Is there a way to schedule a batch job to generate security audit log (SM20) automatically and possibly send a message to SAP Inbox or generate a spool request? Release is 4.6C.
Regards
Nirmal

> May be this is a repeat question for this forum. Apologize, if it is.
You don't need to apologize. You only need to do a very simple search...
> Total Questions: 18 (16 unresolved)
Perhaps 16 of those 18 questions you have not followed up on could have been spared as well?
Please do the needfull.
Cheers,
Julius

Automatic payment block configuration

Hi,
How and where can I deactivate automatic payment block(in MIRO) fo particular doc. type ?
I do not want to deactivate amount check for whole company code.
Thanks and Regards
Rafal
Edited by: Rafal Pojda on May 4, 2009 11:35 AM

HI,
In SPRO-MM-LIV-invoice Block-->Activate Amount Check
Deactivate the same
In SPRO-MM-LIV-invoice Block-->Stochastic Block
Deactivate the same
and in the Vendor Master Setting in the Payemnt Transaction,--Make the Payment methos --Free for payment.
After that the amount Tolerance limit--Make it as dont check
it is done in the T code OMR6, as per the company code
against the keys mentioned below
u2022     AN: Amount for item without order reference
u2022     AP: Amount for item with order reference
u2022     BD: Form small differences automatically
u2022     BR: Percentage OPUn variance (IR before GR)
u2022     BW: Percentage OPUn variance (GR before IR)
u2022     DQ: Exceed amount: quantity variance
u2022     DW: Quantity variance when GR quantity = zero
u2022     KW: Variance from condition value
u2022     LA: Amount of blanket purchase order
u2022     LD: Blanket purchase order time limit exceeded
u2022     PP: Price variance
u2022     PS: Price variance: estimated price
u2022     ST: Date variance (value x days)
u2022     VP: Moving average price variance
Hope so it helps
Regards
Anjanna

Audit is deactivate automatically

Similar Messages

Maybe you are looking for