Audit log missing in message in Message Monitor

Hi,
I am facing a weird problem.
I found this in one of my scenario where we are using AS2 adapter and its an IDoc to file scenario.
When I go to details of messages in message monitor in RWB,sometimes the Audit log is empty.
It is happening randomly and not specific to any scenario as later on I found the same problem in some messages from other scenarios too.
I have never faced this problem till now and it was working fine before.
Can anyone please let me know what could be the reason for this as this is difficult for me in case I need to analyse a message and there is no audit log.
Thanks in advance.
Regards,
Shweta

Hi Rajesh,
Doesnt work for me :(((
404 Not Found
The requested resource /messagingsystem/monitor/monitor.jsp is not available
Details: File [messagingsystem/monitor/monitor.jsp] not found in application root of alias [/] of J2EE application [sap.com/com.sap.engine.docs.examples].
Thanks.
Regards,
Shweta

Similar Messages

Unable to see audit log in Adapter Engine (Communication channel monitoring

Hi
I am unable to see audit log in Adapter Engine (Communication channel monitoring).
Could please suggest what parameter to set to display in PI 7.0 visual administrator.

/people/kenny.scott/blog/2009/03/08/pi-71-af-messaging-system-audit-log-persistence
Did you tried this paramter even though the above is applicable for PI 7.1
Rajesh

Missing Audit Log of Adapter Engine in Message Monitoring

Hi!
I've a problem with a fresh installed PI:
The Adapter Engine doesn't log anything in the Message Monitoring. The Integration Engine logs everything properly, but all entries from the adapter engine are missing. It looks like no message was processed by the AE, but in fact AE is processing the messages properly, only logging fails.
What can cause this behaviour?
Best regards,
Daniel

Hi Agasthuri,
yes, maybe something gone wrong in the post install, I will ask the guy which did the installation of the PI. Therefore I didn't have the logon data for performing a cache refresh, but in the log entries it seems that this is working properly.
Hi Praveen,
in Communication Channel Monitoring (In PI this is no longer found under Adapter Monitoring), I can see that the messages are delivered, but I can't see the Audit Log entries there.
I checked the MDT, but there are also no messages displayed.
End-to-End-Monitoring seems to be a good solution, but it seems that it is something configured wrong in this installation I will try to get the guy which cares for Basis to look after it.
Best regards,
Daniel

Audit log is empty in RWB CC Monitoring

Hi experts,
I am facing a problem with the message monitoring in the RWB. The Audit Log tab for the message details has nothing while the Message Content and Message data contain information about the message. I have set the parameter message.auditLogEnabled to false for the service com.sap.aii.af.svc in the NWA and restarted the instance but with no luck. Please help me out.
Regards.

Hi Prateek,
That parameter was 'true' by default.
As per this blog,
http://www.sdn.sap.com/irj/scn/weblogs;jsessionid=(J2EE3417800)ID0321728450DB01035845556380020404End?blog=/pub/wlg/13456
I changed it to 'false'. The persistence of messages is 24 hours, which is fine.
I am now trying to look at the table XI_AF_MSG_AUDIT. It has about 800K records in it, in which about 80k have 'DLNG' as their status. Do you think this is causing any problem?
Regards.

How to use *MonitorManager* to add custom messages in channel monitoring?

Hi experts,
How to use MonitorManager to add custom messages in channel monitoring for custom adapter development(Not in audit log).
like
Type Time Stamp Message ID Explanation
6/25/11 6:39:47 AM 00199942-6e43-02df-96ca-8b538c63dd98 Message processing completed successfully
6/25/11 6:39:47 AM 00199942-6e43-02df-96ca-8b538c63dd98 Message with ID 00199942-6e43-02df-96ca-8b538c63dd98 processed
6/25/11 6:39:46 AM 00199942-6e43-02df-96ca-8b538c63dd98 Message processing started
6/24/11 6:43:26 AM 00199942-6e43-02ef-96b1-7650f3495e03 Message processing completed successfully
6/24/11 6:43:26 AM 00199942-6e43-02ef-96b1-7650f3495e03 Message with ID 00199942-6e43-02ef-96b1-7650f3495e03 processed
6/24/11 6:43:24 AM 00199942-6e43-02ef-96b1-7650f3495e03 Message processing started
6/23/11 6:45:52 AM 00199942-6e43-02df-9698-5be345a9ddf5 Message processing completed successfully
6/23/11 6:45:52 AM 00199942-6e43-02df-9698-5be345a9ddf5 Message with ID 00199942-6e43-02df-9698-5be345a9ddf5 processed
6/23/11 6:45:50 AM 00199942-6e43-02df-9698-5be345a9ddf5 Message processing started
6/22/11 6:43:30 AM 00199942-6e43-02ef-95ff-2c03493dc078 Message processing completed successfully
Edited by: SAP_PI_D on Jun 28, 2011 12:10 PM

Solve by myself

Adding entries in Audit Log Tab in Component Monitoring under Runtime Workb

Hello Experts,
I am trying to add my own audit log entries to the Audit Log Tab under Runtime Workbench -> Component Monitoring. I found this sap help link (http://help.sap.com/saphelp_nwpi71/helpdata/en/3b/6fe540b1278631e10000000a1550b0/frameset.htm) I am not sure if i am going in the right direction or not. But, when I tried to use the code in my User Defined Function in Message Mapping it gives me java error on PublicAPIAccess.
Can anyone please let me know what am i doing wrong or if I am going in a totally wrong direction to achieve me goal.
I am using PI 7.1 without EP1 and my example uses File adapter.
Thanks!!

Hi,
if you are trying to add custom audit log for system monitoring in RWB in component monitoring, then i think it is not feasible........moreover for this thing, you can ask your basis guys to configure CCMS in your XI system to recieve alerts for your system.............
if you are trying to add custom audit log msgs for your msg processing, then you should develop a custom J2EE adapter module and add your audit log entries in the process method of your adapter module..............
Regards,
Rajeev Gupta
Edited by: RAJEEV GUPTA on May 6, 2009 7:12 AM

Write to audit log from Axis Handler

Hi guys,
Using PI 7.11 SP 04 I have deployed the com.sap.aii.af.axisproviderlib.sda containing the libraries for Axis.
This is deployed fine and I can write my Handlers without trouble.
There is only 1 issue bugging me and that is the writing to the Adapter Audit Log. In SAP Note 1039369 FAQ XI Axis Adapter it is described how to write to the Audit log.
I can successfully write to the Channel monitor. But when I try to write to the Audit log data is still just written to the Channel monitor and not the audit log.
So what I have done is:
StatusAgent sa = (StatusAgent) getOption(Constants.MONITOR_AGENT_KEY);
Hashtable ht = getOptions();
ht.put("audit", Boolean.TRUE);
ht.put("pivoted", Boolean.TRUE);
sa.reportEvent(Status.OK, "This should be written to audit log but is written to channel monitor", ht);
sa.reportEvent(Status.ERROR, "This should also be written to audit log but is written to channel monitor", ht);
If i print the content of my hashtable in the channel monitor I can see that my entries are put into the table just fine. The 'audit' entry just seems to be completely ignored.
Anyone have and suggestions?
Regards,
Daniel

Hi Guys,
I need to know what JAR file i need to download for the following packages from SAP PI.
import com.sap.aii.axis.monitor.Status;
import com.sap.aii.axis.monitor.StatusAgent;
import com.sap.aii.axis.utils.Constants;
I am doing AXIS custom modules and i need to write to the PI 7.1 Audit Logs.
Thanks in advance.
Raj

SOAP error in audit log of message monitor

Hi,
I am using RPC wsdl file for idoc-xi-soap services. When I am doing the testing for the scenario in the message monitor I am getting the following audit log:
2008-02-29 15:21:48 Success Message successfully received by messaging system. Profile: XI URL: http://EMHBSSAP05.bekaertcorp.local:56600/MessagingSystem/receive/AFW/XI Credential (User): PIISUSER
2008-02-29 15:21:48 Success Using connection SOAP_http://sap.com/xi/XI/System. Trying to put the message into the receive queue.
2008-02-29 15:21:48 Success The message status set to DLNG.
2008-02-29 15:21:48 Success Delivering to channel: ZCC_Material_SOAP
2008-02-29 15:21:48 Success MP: Entering module processor
2008-02-29 15:21:48 Success MP: Processing local module localejbs/sap.com/com.sap.aii.af.soapadapter/XISOAPAdapterBean
2008-02-29 15:21:48 Success Message successfully put into the queue.
2008-02-29 15:21:48 Success The message was successfully retrieved from the receive queue.
2008-02-29 15:21:48 Success SOAP: request message entering the adapter with user J2EE_GUEST
2008-02-29 15:21:48 Success SOAP: completed the processing
2008-02-29 15:21:48 Success SOAP: continuing to response message a9ea9a30-e6d1-11dc-c8bd-001a4b0658c1
2008-02-29 15:21:48 Error SOAP: response message contains an error XIAdapter/PARSING/ADAPTER.SOAP_EXCEPTION - soap fault:
2008-02-29 15:21:48 Success SOAP: sending a delivery error ack ...
2008-02-29 15:21:48 Success SOAP: sent a delivery error ack
2008-02-29 15:21:48 Success Acknowledgement creation triggered for type: SystemErrorAck
2008-02-29 15:21:48 Error MP: Exception caught with cause com.sap.aii.af.ra.ms.api.RecoverableException: SOAP: response message contains an error XIAdapter/PARSING/ADAPTER.SOAP_EXCEPTION - soap fault:
2008-02-29 15:21:48 Success Acknowledgement creation triggered for type: AckNotSupported
2008-02-29 15:21:48 Error Exception caught by adapter framework: SOAP: response message contains an error XIAdapter/PARSING/ADAPTER.SOAP_EXCEPTION - soap fault:
2008-02-29 15:21:48 Error Delivery of the message to the application using connection SOAP_http://sap.com/xi/XI/System failed, due to: com.sap.aii.af.ra.ms.api.RecoverableException: SOAP: response message contains an error XIAdapter/PARSING/ADAPTER.SOAP_EXCEPTION - soap fault:.
2008-02-29 15:21:48 Success The message status set to WAIT.
Can anybody suggest what is the meaning and root cause for the error:
SOAP: response message contains an error XIAdapter/PARSING/ADAPTER.SOAP_EXCEPTION - soap fault:
Thanks & Regards
Prabhat

go to sxi_monitor and get the inbound message, later go to IR an do a TEST mapping.
any error occur?if yes, paste it here
generally soap fault o soap exception relate to an error from WS side,but before say nothing check you have all data and transformation OK.
hope it helps

Trace level of RWB's Message Monitoring - Detail Message - Tab "Audit log"

Hi,
My flow is: File -> PI -> Transformed File with seeburger module. Everything is good except the trace level in RWB.
Exactly, in our PI production, under RWB -> Message Monitoring, when I select a message (e.g PI -> Outside) and see its Detail, under tab "Audit Log", I have a log with only 2 pages (which corresponds to the sender part "File -> PI")... whereas in our PI pre-production, I have 4 pages for the exact same flow, on which I have also info of the receiver part "PI -> Outside"...
My question is just: do you know which parameter is involved in this trace level of RWB's Message Monitoring Detail log ?
regards.
Mickael
Note: in [Help SAP|http://help.sap.com/saphelp_nw04/helpdata/en/fd/16e140a786702ae10000000a155106/frameset.htm], I see only this sentence "Audit Log: The audit log for the selected message is displayed as the default setting.".
Edited by: Mickael Huchet on Oct 18, 2011 1:59 PM

Hi Shabarish,
Thanks that will help to localize my search.
else by hazard, you don't know which parameter in this tree is for the "Audit Log"?
coz I did a quick look in prod and pre-prod, but it seems the severity is the same (e.g "Info" for most of them) whereas the trace level of "Audit log" is different.
Thanks for
Regards.

Audit Log - Cancelled Messages

Hi all,
Can we see in AIF which user id has cancelled a particular message?
Thanks.
Kind Regards,
Brecht Bauwens

Hello Rafael,
We are on PI 7.0 Service Pack 15. We are also having the similar issue in our production system for the asynchronous messages delivered to the legacy database using JDBC Adapter. The status of the message in CC Monitoring is given as message successfully delivered, however the audit log is blank and has no information.
Could you please let me know, if the issue is resolved in your case by applying the above SAP Notes?
Thanks in advance!!
Thanks,
Manohar. Dubbaka

SQLException in the audit log for the Message Display Tool

Hi
I´m newbie in PI Technology, and i have some issues when i try to do the next.
This is the scenario:
I need to communicate two systems, for one side i have SAP, and for the other side i have ADI (legal system) so, i use PI to do this (the communication), PI receive the data from SAP by means abap proxy, until this everything is correct, then i do the mapping of the data and i send a message to ADI (with the SAP XI Runtime Workbench) by means JDBC adapter, if i check the sended message with "Message Display Tool" show that the message was sent (status "Delivered") but if i check the received messages option, in the audit log displays the five next errors:
Error: Could not execute statement for table/stored proc. "FADIA4" (structure "StatementFADIA4") due to java.sql.SQLException: FADIA4 in FILEMET not valid for operation.
Error: JDBC Message processing failed, due to Error processing request in sax parser: Error when executing statement for table/stored proc. 'FADIA4' (structure 'StatementFADIA4'): java.sql.SQLException: FADIA4 in FILEMET not valid for operation.
Error: MP: exception caught with cause com.sap.engine.interfaces.messaging.api.exception.MessagingException: Error processing request in sax parser: Error when executing statement for table/stored proc. 'FADIA4' (structure 'StatementFADIA4'): java.sql.SQLException: FADIA4 in FILEMET not valid for operation.
Error: Adapter Framework caught exception: null
Error: Delivering the message to the application using connection JDBC_http://sap.com/xi/XI/System failed, due to: com.sap.engine.interfaces.messaging.api.exception.MessagingException: Error processing request in sax parser: Error when executing statement for table/stored proc. 'FADIA4' (structure 'StatementFADIA4'): java.sql.SQLException: FADIA4 in FILEMET not valid for operation..
if there are somebody that maybe could know what is the problem?, could the problem be the side of the legal system?, because inside of PI when i do the Test Configuration in the Integration Directory, the end of the test is successful.
Any comment is well received!!
Thanks,
Vicman
P.D. sometimes the error is: java.sql.SQLException: Token ) was not valid. Valid tokens: DAY PATH YEAR LABEL MONTH OPTION RESULT CONNECTION TRANSACTION.
what does it means?

Hi Pooja,
thanks for you quickly response!
XML sended:
<?xml version="1.0" encoding="UTF-8"?>
<ns0:MT_PgDocVentaECC_req xmlns:ns0="http://gmodelo.com/ECC/enviarCobranza">
   <DT_DatosDeControl>
      <MIDDLEWARE_ID/>
      <QUICK_ID/>
      <INTERFACE_NAME/>
      <MESSAGE_ID/>
      <LOG_ID/>
      <USER_ID/>
      <SOURCE_SYSTEM/>
      <TARGET_SYSTEM/>
   </DT_DatosDeControl>
   <DT_PagoDocVentaECC>
      <VKORG>TVKO</VKORG>
      <VKBUR>TVBUR</VKBUR>
      <VKBUR1>TVBUR</VKBUR1>
      <ROUTE>TVRO</ROUTE>
      <ROUTE1>TVRO</ROUTE1>
      <BLART>Q</BLART>
      <BELNR>100</BELNR>
      <WRBTR>200</WRBTR>
      <LFART>100</LFART>
      <VBELN>100</VBELN>
   </DT_PagoDocVentaECC>
</ns0:MT_PgDocVentaECC_req>
this is the XML received:
<?xml version="1.0" encoding="UTF-8"?>
<ns1:MT_PgDocVentaADI_req xmlns:ns1="http://gmodelo.com/ADI/recibirCobranza">
<StatementFADIA7>
<FADIA7action="INSERT">
<Table>FADIA7</Table>
<Access>
<NUMCIA>123</NUMCIA>
<NUMALM>234</NUMALM>
<SUBALM>300</SUBALM>
<CVETOP>16</CVETOP>
<FOLOPV>22</FOLOPV>
<SECOVA></SECOVA>
<IMPOVA>200</IMPOVA>
<ALMOVA>5678</ALMOVA>
<SUBOVA>21</SUBOVA>
<TOPOVA>21</TOPOVA>
<FOPOVA>41</FOPOVA>
<FECOVA>100</FECOVA>
<STSOVA> </STSOVA>
</Access>
</FADIA7></StatementFADIA7>
</ns1:MT_PgDocVentaADI_req>
what do you think about it?, anything wrong?

Audit Log Report generating an "Out of Memory" error message.

Greetings. We are a new IDM customer. We are running IDM 6.0 with an Oracle database. We are now getting the following error message when we run the IDM Audit Log Report for Today's Activities:
"java.lang.OutOfMemoryError".
How do we increase the memory setting for reporting? Thanks.

Hi,
I am also getting the same error. I have netbeans with tomcat andi modified the setting the netbeans.conf to
netbeans_default_options="-J-Xms32m -J-Xmx750m -J-XX:PermSize=32m -J-XX:MaxPermSize=750m -J-Xverify:none -J-Dapple.laf.useScreenMenuBar=true"
i have 896MB of RAM. However, the error is still showing up? Any ideas on how to resolve this?
Thanks,

Standard Web Service to get message audit log?

Hi,
Is there any standard web service to get the audit log of a message based on its message id?
Thanks in advance.

Standard web service is not available....however if you want to get the audit log details then you need to make a JCo call (if i am not wrong) to one of the SAP tables: XI_AF_MSG_AUDIT
Regards,
Abhishek.

500 Internal Server Error - Channel Monitoring Audit Log

Hi Experts,
We are facing an error in the 'Audit Log' of the communication channel monitoring of a File Sender Adapter.
The channel uses a custom written Java Module which uses XSLT parser internally. The audit log displays the following error:
500 Internal Server Error
Error: "Application error occurred during the request processing."
Troubleshooting Guide https://sdn.sap.com/irj/sdn/wiki?path=/display/jsts/home
Details: "The WebApplicationException log ID is [4698F300D2C40C2000000000000009AA]."
This error occurs both when the file is processed successfully or when in error. In case of a positive test case file, we can even see the message reaching Pipeline (SXMB_MONI). But only the audit log does not show the processed steps in the channel monitoring and displays the above error message.
We have even established that the cause of the error is Java Module (First, we executed by removing our custom Java Module from the module steps and the audit log showed the steps correctly. But by putting the module back in the channel, the error resumed).
Initially, the error was not coming and we were able to test this properly. But over the time the audit log error started. Now, we are not able to get rid of this even by restarting the channel or restarting the Java stack of the server.
To me, it seems like a memory issue in the Java Stack.
Any thoughts?
Can we find out where to find the details of the WebApplicationException log ID displayed above?
Thanks,
Sudheer

Hello,
This could be generic but may helo you:
500 Internal Server Errors
Description: The server encountered an unexpected condition which prevented it from fulfilling the request.
Possible Tips: Have a look into SAP Notes u2013 804124, 807000
Regards,
Caio Cagnani

Audit log in communication channel monitoring(MDT)

Hi,
I am doing a soap lookup in my message mapping for an interface.In order to monitor the request and response communication , I am unable to see the 'Audit Log' for the soap communication channel that was configured for the same.On clicking the message id for viewing the audit log,an error page is displayed as "Requested Page not found"
Could you please help me as to why I am unable to see the Audit Log.
Regards
Janice

Hi! Janice,
Could you guide me as to where I can set the parameter for sync logging in AE
You can got to
1) T Code: SXMB_ADM
2) Click Integration Engine Configuration
3) Again click Configuration
4) Now Keep the parameter as TRACE_LEVEL = 3 instead of 0 or 1 or 2.
then again go to SXMB_MONI there you can view now SOAP Request and Response.
I hope now it is resolved right
Regards
Amar Srinivas Eli

Audit log missing in message in Message Monitor

Similar Messages

Maybe you are looking for