Audit Trail vs Audit Trail for Assignments for e-Recruiting

Hi,
We are using e-Recruiting on EHP3 sp05 so the administrator still has the BSP interface. On here there are two links one for Audit Trail and another for Audit Trail for Assignments. We can find data under Audit Trail (every time a status change activity is run it updates the audit trail), however we cannot find anything under Audit Trail for Assignments. Does anyone know what this is for and how you get this populated?
Many thanks
Tom

Hello,
I could find the below information on SAP Help. Please check if this is anyway useful.
The recruiting administrator can use the iView "Access Audit Trails" to get access to the Audit Trail of a candidate profile. The recruiting administrator can then search for candidates and call an overview of the data of the different profile versions. In addition to the profile versions, the recruiting administrator can also display the candidates' assignments that were derived from the search result
Procedure
       1.      In the services of your work overview, choose Access Audit Trails under Transaction Data Management.
       2.      Specify selection criteria such as the first and last name and e-mail address of the candidates for whom you want to view the audit trails and then choose Search. The system displays a list with the search results. If audit trails exist for a candidate, the system displays a link to each of them in the corresponding columns of the list.
       3.      Double-click an entry in these columns to open the relevant audit trail. The system displays a list with all versions of the audit trail.
       4.      Select a version by clicking it. The system displays the Data Overview of Candidate or the Data Overview of Assignment.
http://help.sap.com/erp2005_ehp_04/helpdata/EN/f1/cc084136b5f423e10000000a155106/frameset.htm
http://help.sap.com/erp2005_ehp_04/helpdata/EN/07/091c174ad74c6ba5f8011c9f78e839/frameset.htm
Best regards
G Raj

Similar Messages

I just purchased Audition CC as a single app purchase for $19.19/month. I already have Creative Cloud installed. The program is not downloading - I clisk the "downlaod" button, the page says the program is downloading, but nothing is actually happening.

I just purchased Audition CC as a single app purchase for $19.19/month. I already have Creative Cloud installed. The program is not downloading - I clisk the "downlaod" button, the page says the program is downloading, but nothing is actually happening. What is going on?

Nobody can tell you anything without proper system info or other technical details.
Mylenium

Can Adobe Premiere and Audition "Royalty Free" music files be used for "commercial" projects?

I apologize for not being able to find this answer on my own but can anybody please answer this: Can Adobe Premiere and Audition "Royalty Free" music files be used for "commercial" projects?

SusieBird
Are you using any version of Premiere Elements? Or, is it that you are really asking about some version of Premiere Pro and Audition?
If the latter, please refer to
Premiere Pro
Audition CS5.5, CS6 & CC
In the Adobe Premiere Elements Forum in which your thread has been posted, it has always been written by others (Bill Hunt, Steve Grisetti) that
Premiere Elements users can use Premiere Elements assets for commercial projects. I do not use Audition, so I cannot speak to the Audition situation.
We are a user to user forum here and not Adobe. The ultimate answers on this would be from Adobe itself to avoid what is written and what is written between
the lines.
ATR

Trying to download Photo shop elements free trail and it is asking me for serial #. Where do you find free trail Serial #

Trying to download Photo shop elements free trail and it is asking me for serial #. Where do you find free trail Serial #

There is no serial number for a trial version. You get the serial number when you purchase. You should be able to select an option to continue with the trial if it is not indicating the trial is over. If the trial is indicated as over, that can happen prematurely for a variety of reasons.

Why is it that i paid for photoshop for £8.57 a month but then i can only use photoshop as a trail and when i want to get the full version it charges me more money??

why is it that i paid for photoshop for £8.57 a month but then i can only use photoshop as a trail and when i want to get the full version it charges me more money??

Does your Cloud subscription properly show on your account page?
If you have more than one email, are you sure you are using the correct Adobe ID?
https://www.adobe.com/account.html for subscriptions on your Adobe page
If yes
Some general information for a Cloud subscription
Cloud programs do not use serial numbers... you log in to your paid Cloud account to download & install & activate... you MAY need to log out of the Cloud and restart your computer and log back in to the Cloud for things to work
Log out of your Cloud account... Restart your computer... Log in to your paid Cloud account
-Sign in help http://helpx.adobe.com/x-productkb/policy-pricing/account-password-sign-faq.html
-http://helpx.adobe.com/creative-cloud/kb/sign-in-out-creative-cloud-desktop-app.html
-http://helpx.adobe.com/x-productkb/policy-pricing/activation-network-issues.html
-http://helpx.adobe.com/creative-suite/kb/trial--1-launch.html
-ID help https://helpx.adobe.com/contact.html?step=ZNA_id-signing_stillNeedHelp
If no
This is an open forum, not Adobe support... you need Adobe staff to help
Adobe contact information - http://helpx.adobe.com/contact.html
-Select your product and what you need help with
-Click on the blue box "Still need help? Contact us"

Multiple Account Assignments for purchase/framework requisition

Hi,
Multiple Account Assignments for purchase/framework requisition:
The actual MM configuration is a single account assignment in the purchase requisition (although the option of multiple account assignments exist for trips). What are the implications at GR posting? Assuming that we could use the option for quantity and percentage distribution.
Regards
Suresh

Hi
Multiple account assignment:
Specifying Multiple Account Assignment
This procedure allows you to apportion the costs associated with a PR/PO item (among several cost centers, for example).
With multiple account assignment, the account assignment data entered takes the form of individual account assignment items.
Prerequisites
When specifying multiple account assignment for an item, you must consider the following points:
1.How is the net value of a PO item to be distributed (apportioned) among the individual account assignment items?
The costs can be allocated on a quantity or percentage basis (for example, 10 pieces or 10% of the order value to cost center 100).
2.How are the costs to be apportioned if only a part of the ordered quantity has been delivered and invoiced?
The partial invoice amount can be distributed proportionally, i.e. evenly, among the account assignment items of a purchase order.
The partial invoice amount can be distributed on a "progressive fill-up" basis, i.e. the invoiced amount is allocated to the individual account assignment items one after the other. Only when account assignment item 1 has been charged in full is item 2 charged; only when account assignment item 2 has been charged is item 3 charged, and so on. This process continues until the total invoice value of the PO item is reached.
Procedure
1.When entering an item, specify the account assignment category for the desired item on the item overview screen.
2.Choose Item -> Account assignments.
The account assignment window appears.
3.Enter the account assignment data for the first account assignment item.
Choose Change display to call up the multiple account assignment screen.
4.In the item fields (upper part of this screen) enter the relevant data:
Select the GR non-val. field to designate the GR for this item as non-valuated (as the item has been ordered for direct consumption).
In the Distribution field, specify whether the costs are to be apportioned on a quantity basis or by percentage.
In the Partial invoice field, specify whether the value of a partial invoice is to be allocated to individual account assignment items successively, whereby one is debited in full before a posting is made to another one (in which case, some account assignment items may not be debited at all as a result of a particular invoice), or whether the value of such a partial invoice is to be distributed among all account assignment items in equal portions.
5.For each account assignment item, enter either the quantity or the percentage of the total value to be charged to the relevant account assignment item.
To enter further items with the same account assignment data, choose Edit -> Repeat account assignment -> Switch on. The account assignment data will then be automatically adopted in the next item.
6.Repeat as necessary for other items.
7.Save the purchase order.
A vendor submits an invoice for 60% of the total order value. The cost of the ordered goods is to be divided equally among cost centers 1 - 5 (that is, 20% of the total cost is to be borne by each).
If you specified for the PO item that the value of a partial invoice is to be debited to the individual account assignment items on a "progressive fill-up" basis, cost centers 1 to 3 will each be debited with their full 20% share of the total cost on the basis of this partial invoice, whereas cost centers 4 and 5 will not be charged at all. (The latter two cost centers will not be debited until the remaining amount is invoiced.)
Regards
Ramakrishna

Assignments for requisition screen

I am doing e-recruitment configuration. I have following doubts. Can you help me. I read the SAP help but it is not clear.
-- Questionnaire Ranking -- How do you configure this
-- In the Assignments Requisition screen, there is a column called Match. How is this configured. The reason is, if the candidate does not complete a questionnaire (red traffic light), the column show Five stars. I do not understand.

Hi Nicole,
Only a couple employees were affected. I agree about the search profile, but I know that my search profile fields are fine. What I found was that some employees who had never logged into the system (so who had never accepted the data privacy statement) were added to a requisition by a recruiter. There were a number of candidates in this scenario. In some cases, once added, their name would not appear on the 'Assignments for Requisition' screen. A blank line would appear in its place though. And if you clicked on the affected line and clicked the 'Activities' button, the subsequent window did contain their name. So something was preventing their name from being displayed only on the 'Assignments for Requisition' screen.
I have a feeling it could be authorizations-related, based on the user that triggered the creation of the candidate object, but I am not certain about this yet.
If anyone has ever seen this, your feedback is much appreciated.
Shane

BOPF: What is attribute assignment in node assignments for determination?

BOPF: What is attribute assignment in node assignments for determination?

It gives you the flexibility to maintain certain attributes of the node(for which determination is configured) for loading the data into buffer. BOPF will load the data into buffer based upon any change in the mentioned attributes of that node.

Diagram showing the connector pin assignments for a TBX-68 terminal block

Could someone provide me with a diagram showing the connector pin assignments for a TBX-68 terminal block? The terminal block is connected to a PCI-6204E board.
Thank you for your time
Andrew Lockyer

Since pins 1 through 68 are clearly marked on the terminals, I'm guessing that what you really want is the pin out of your DAQ board. That information should be in the manual that came with the board. I could find no reference to a 6204 board on NI's site so I can't point you to an electronic version that you can download. Double check the model number of your board. Once you locate the manual and the pin out of the 68 pin connector on your board, then everything else is simple. Assuming you have a 68 pin ribbon cable connected between the board and the terminal block, then pin 1 on the board is pin 1 on the terminal block, etc.

Automatic Internal number assignments for Proj and WBS

Hello experts,
Is there a way to generate automatic internal number assignments for Project definition and WBS like in PO, SO ?
In other words, Like purchase order system should generate a number and assign when you create a project with WBS. How to do this?
Regards
Srinivasan Desingh

Hi Virendra,
Could you please explain in detail about the ABAP program.
Do I need to write in user exit? or standalone program?. If it is user exit please let me know the user exit.
How to link to the main program?
Regards
Srinivasan Desingh

Problems packaging assignments for incopy

After the recent updates I can't seem able to package the assignments for inCopy anymore.
Any clue?
If I right click on the assignment all I get is "open package" or "add to assignment" but the option "package for inCopy" has disappeared

No. It doesn’t work that way.
Everyone in this workflow needs to have the same fonts installed.
Bob

Create a follow-on audit in SAP Audit Management

Hi, I am struggling with figuring out how to create a subsequent or follow-on audit in SAP Audit Management.
I am aware of the "Subsequent audit required" check box on the evaluation screen of the Audit, but as far as I could tell from other people's feedback is that the system does not create a follow-on audit automatically.
How then does the system recognize the "Last Audit" when you click on the "Display Last Audit" button?
Thank you
Melinda

Hi,
"Subsequent audit required" check box is just informative. It does not automatically create an audit.
When you click on the "Display Last Audit" button, system finds the last completed audit for the audit object assigned. You can customize the function of this button by a BADI, defined in customization for Audit Management.
Regards.

Urgent--Importing Audit Plan in Audit Management Module

Hi All,
Can anyone know what are the prerequisite for Audit management.
i am getting problem while importing an audit plan from XML. The import button ( import FROM XML) is disabled.
Is there anything I need to activate so that the import button will get enable.
If anyone knows anything about that kindly help.
Thanks
Tripti

Sumita
Thanks for quick response
I created audit plan,question list and audit while creating audit -in audit object -"Business Partner"- how to get the details of business partner- (F4 - no values) where and which T.code - I have to create business partner
Once I release Audit - can I able to create CAPA?
plz throw some lights.........
Thanks
Sami

Suggestions for settings for web HD similiar to QT Trailers

Hi everyone,
I'm looking for suggestions for settings for Compressor for setting up high quality
but not to large of files....similiar to what Apple is using for the HD QT Trailers.
Any suggestions?
thanks

Open one of the trailer with Quicktime and see what numbers they use, kbits/s. And read this:
http://thedvshow.com/faq-pro/?action=article&cat_id=016001&id=764&lang=

Audit vault vs auditing of access

Can anyone help clarifying what is included in 11g and what is an extra cost? It sounds like AuditVault is an add-on product/cost?
But what about the audit settings I see here with DBMS_AUDIT_MGMT:
http://www.oracle-base.com/articles/11g/auditing-enhancements-11gr2.php
http://docs.oracle.com/cd/E14072_01/network.112/e10574/auditing.htm
It looks like any enterprise license already has the right to create logs with DBMS_AUDIT_MGMT for free/included. Is that correct? If so, what extra does auditvault give you? It looks like the reporting/alerting/etc...
But if I just send the raw/free audit logs to splunk for alerting/reporting, it looks like I can still do my own reporting without adding an extra oracle package. Does that sound right?
Thank you!

If so, what extra does auditvault give you? It looks like the reporting/alerting/etc...yes ,a GUI based product to setup auditing at database level and get alert,pdf report based on requirement.
it consolidate data from all source Once consolidated, Oracle Audit Vault removes audit data from the source systems where the audit data was generated, simplifying the management of auditing across the enterprise
http://www.oracle.com/technetwork/products/audit-vault/overview/index.html
But if I just send the raw/free audit logs to splunk for alerting/reporting, it looks like I can still do my own reporting without adding an extra oracle package. Does that sound right?yes,

Audit Trail vs Audit Trail for Assignments for e-Recruiting

Similar Messages

Maybe you are looking for