Audit View configuration

Hello,
I have a question about de tracking module of the Workspace.
I must customize it for one of my clients.
In the Audit panel of a process Instance, its possible to watch the form of each task, but only the owner of a task can see the form.
My client needs that every user that has participated in a process instance must be able to access all the tasks forms, even if hes not the owner.
Is it possible to configure a read access to all participants ?
thanks
Will

Hi Will
We provide an enhanced Enquiry Screen within Workspace that has this capability.
More info and download here: http://www.avoka.com/avoka/enquirytool.shtml
If you have any queries, please contact [email protected]
Howard

Similar Messages

  • View offending records in audit viewer for set-based mappings

    i have mappings which is configured to load data from Oracle9i external tables into Fact tables.
    i am using set-based loading with reject limit set to 0. Whenever there's an offending record from the external table, the whole mapping will fail with message 'Fatal error or maximum error exceeded'. This is exactly how i want it.
    now, when i check the mapping process in audit viewer, i expect to see which record caused this process to abort. instead, i only see the same message stated above (which is not very helpful in identify source of the problem, right ?)
    i believe this is due to the mapping being set-based. unfortunately i can't use row-based as i do not want ANY record loaded into the fact table even if there is 1 offending record. In row-based mode, it seems to auto-commit after a certain number of records (bfor any errorneous records are encountered). i have attempted to set the 'commit block size' to something big value (eg. 50,000) but it still seems to commit after say every 2000 records ...
    any suggestions ?
    thanks

    Since you need set based code in order to avoid commits, it is difficult to trap record level errors - the set based procedure will run to the end or encounter an error and all you will get is a generic SQL error code and message. The commit frequency should work - I am not aware of any problems in this area. Can you give more details about this?
    It might also be possible to filter correct records by using a splitter and set it in such a way that correct records get loaded into the production table, while incorrect are 'parked' into a temporary table for review. Another possibility, if you need complex data cleansing prior to loading, would be to use an intermediate staging table and then use the row based mode on it, before transferring the correct records from this staging table to the appropriate production table. This last solution will slow down your process because it introduces an additional step, but might give you the loading flexibility you need.
    Regards:
    Igor

  • Security Audit filters configuration

    Hi,
    Can any one help me with Security Audit filters configuration?
    I want to know  what are the variuos Static and Dynamic Profile paramaters to be set as  part of Security Audit Filter Setting.
    If possible pls provide me with the Setup Procedure as well.
    Thanks

    Hi,
    The Static Filters:
    Rsau/enable = security Audit Log
    Rsau/local/file = names and location of audit files
    Rsau/max_diskspace/local = maximum space to allocate for audit files.
    Rsau/selection_slots = number of filters to allow for security audit log
    The Dynamic Filters:
    Rsau/local/file
    Rsau/max_diskspace/local
    Rasu/selection_slots
    The Static Filters:
    1.Got to security Audit Log Config screen.(tools-admin-monitor-seecurity-auditlog-config)
    2.Enter the name of the profile to maintain in the dip profile field
    3.If you are creating new audit profile then choose profile-create else if making changes to existing then choose profile-change
    4.Define filters
    5.Activate the filters
    6.save the data
    7.Activate the profile as well
    8.Restart the app server.
    The Dynamic Filters:
    1.Got to security Audit Log Config screen.(tools-admin-monitor-seecurity-auditlog-config)
    2.Choose Dynamic config tab
    3.Choose configuration – change
    4.Define filters
    5.Activate the filters (Configuration- Activate Audit) (Deactivate filter : Deactivate audit)
    6Choose Configuration – Distribute Configuration
    7.Select the status indicator in “list of active instances” table
    To Define Filter: (rasu/selction_slots)
    1.Select the tab for the filter you want to define
    2.Enter the client and user names in the fields
    3.Select the corresponding audit classes for the events you want to audit(Audit events: Critical, Important and Critical)
    SM20 = to view Security Audit Logs
    *Pls don't forget to avoid points if usefull.
    Thanks

  • Report Viewer Configuration Error

    Hi,
    I manage a TFS 2010 Server that makes heavy use of Reporting Services, and I have a user that reported the following error
    when attempting to open a report in the Microsoft Visual Studio Report Viewer:
    Report Viewer Configuration Error
    The Report Viewer Web Control HTTP Handler has not been registered in the application's web.config file. Add <add verb="*" path="Resevred.ReportViewerWebControl.xsd" type = "Microsoft.Reporting.WebForms.HttpHandler, ReportingServicesWebServer,
    Version=10.0.0.0, Culture=neutral, PublicKeyToken=################" /> to the system.web/httpHandlers section of the web.config file, or add <add name="ReportViewerWebControlHandler" preCondition="integratedMode" verb="*"
    path="Reserved.ReportViewerWebControl.axd" type="Microsoft.Reporting.WebForms.HttpHandler, ReportingServicesWebServer, Version=10.0.0.0, Culture=neutral, PublicKeyToken=################" /> to the system.webServer/handlers section for
    Internet Information Services 7 or later.
    Has anyone seen this error before, or have any advice on finding a solution?
    Thank you.

    Hi HealthServices3300,
    You can try to install "Microsoft Report Viewer 2010 Redistributable Package" on your server to check if it works for you.
    For the web.config info, it's for web application. And I'd like to know how did you create the report, and whether the report is for a web app or reporting service. From the error message and report, seems it's not a TFS issue. If it's SSRS project
    issue, please post this issue to
    this forum. If it's a report viewer control issue, you can post this issue in
    this forum for a professional response. After that, please update this thread with the new thread link. Thanks for your understanding.
    Best regards,
    We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
    Click
    HERE to participate the survey.

  • MAP Viewer Configuration in OBIEE

    Hi guys!
    I'm trying to make the maps in OBIEE up and running but I have a strange problem...I've followed this tutorial:
    http://obieelive.blogspot.com/2012/06/map-viewer-configuration-in-obiee.html?utm_source=BP_recent
    and in the last steps in OBI EE I need to import map layers but I can't see even a single one to import ;/
    Any ideas?
    P.S. My database is Oracle 10g R2 10.2.0.4 SE and OBI is 11.1.1.5.0
    With regards,
    PsmakR

    Hi Fahd,
              I want to install OBIEE11g on solaris10. Could you please send me the installation screenshots. My mail id is [email protected] How did you ran RCU? which RCU you used?  Please send me details.
    Thanks & Regards

  • Can't edit view configuration in Z-component

    Hi experts,
    i have a problem with editing a view with the configuration tool in the development workbench (bsp_wd_cmpwb).
    I created an own Z-component, opened it with an enhancement set (there is no way to open a component without enhancement set in our system? It always wants to have one provided), added a view, and now i can't configure it - the and (-)-buttons for adding fields are disabled.
    Looking forward to you answers!
    Thanks in advance and best regards.

    In bsp_wd_cmpwb, besides the option to input the Component name, you have an icon. Clicking that icon would enable/disable the option to create the enhancement set. Try it.
    Once you create view, in 'view configuration' you have the edit button. Once you click it, the + and - options get enables. try it.

  • Exception while defining value attribute/View configuration issue

    Hello,
    I am facing an issue in view configuration. I have added value attributes to an existing context node in component BT116IT_SRVO, GenricItem view, BTADMINI context node. Now after adding the atrribute an exception is triggering as
    "Cannot display view BT116IT_SRVO/GenericItem of UI Component BT116IT_SRVO
    An exception has occurred Exception Class  CX_SY_MOVE_CAST_ERROR - Source type \CLASS=CL_BSP_WD_MIXED_NODE is not compatible, for the purposes of assignment, with target type \CLASS=CL_CRM_BOL_ENTITY 
    Method:  CL_CRM_UIU_BT_ITEMEOV_CN=>GET_QUANTITY 
    Source Text Row:  25 ".
    I have checked  source code of mentioned class, reference of CL_BSP_WD_MIXED_NODE class is coming after adding value attribute .
    Exception is triggering at statement: lr_entity ?= current. => In current ref of CL_BSP_WD_MIXED_NODE class is coming while lr_entity is type ref to cl_crm_bol_entity.
    I would really appriciate your reply on this as how can I avoid this exception? Do I need to redfine this method?
    Moreover the value attributes that I have added does not appear in Available Fields in View Configuration. Could you help me out in how can I make these fields available in configuration?
    Appriciate your replies on same.
    Regards,
    Rashmi

    The problem is solved.
    Thanks
    -Rashmi

  • "Oracle Audit Vault Configuration Assistant" failed

    Hello everyone, I can across this issue while installing AV agent and wanted to know if any one can help with a quick solution. OS= Linux 5, agent_software= 10.2.3 and here is the error messages:
    ++**INFO: Configuration assistant "Oracle Audit Vault Agent One-Off Patches" succeeded**++
    ++**INFO: Command = oracle.av.common.AvcaCfgPlugIn /app/oracle/product/10.2.0/agent_home/bin/avca -s initialize_agent -agentname agentdevmdb1 -agentusr ${s_agentusr} -agentport 7016 -av AHS-SOASOV1-DEVM.ahs.state.vt.us:1521:av.ahs.state.vt.us -rmiport 3121 -jmsport 3300**++
    ++**Command = oracle.av.common.AvcaCfgPlugIn has failed**++
    ++**INFO: Configuration assistant "Oracle Audit Vault Configuration Assistant" failed**++
    ++**-----------------------------------------------------------------------------**++
    ++***** Starting OUICA *****++
    ++**Oracle Home set to /app/oracle/product/10.2.0/agent_home**++
    ++**Configuration directory is set to /app/oracle/product/10.2.0/agent_home/cfgtoollogs. All xml files under the directory will be processed**++
    ++**INFO: The "/app/oracle/product/10.2.0/agent_home/cfgtoollogs/configToolFailedCommands" script contains all commands that failed, were skipped or were cancelled. This file may be used to run these configuration assistants outside of OUI. Note that you may have to update this script with passwords (if any) before executing the same.**++
    ++**-----------------------------------------------------------------------------**++
    ++**INFO: Created a new file /app/oracle/product/10.2.0/agent_home/cfgtoollogs/configToolFailedCommands**++
    ++**INFO: Since the option is to overwrite the existing /app/oracle/product/10.2.0/agent_home/cfgtoollogs/configToolFailedCommands file, backing it up**++
    ++**INFO: The backed up file name is /app/oracle/product/10.2.0/agent_home/cfgtoollogs/configToolFailedCommands.bak**++
    ++**SEVERE: OUI-25031:Some of the configuration assistants failed. It is strongly recommended that you retry the configuration assistants at this time. Not successfully running any "Recommended" assistants means your system will not be correctly configured.**++
    ++**1. Check the Details panel on the Configuration Assistant Screen to see the errors resulting in the failures.**++
    ++**2. Fix the errors causing these failures.**++
    ++**3. Select the failed assistants and click the 'Retry' button to retry them.**++
    ++**INFO: User Selected: Yes/OK**++

    Hi:
    A log of everything the avca command is trying to do is kept in $ORACLE_HOME/av/log/avca.log. Please review that to see what could have caused the issue.

  • Infrastructure Audit Level configuration

    Hello,
    I''ve searched in MDS tables to found where is stored the configuration value of the SOA Infrastructure Audit Level, but I couln't find it, Can anyone tell me where is persisted this configuration?
    Thank in advance.

    Yes, in this tables are stored the audit details/data generated by the executed instances, but I'm asking for the configuration of this audit details, I want to know where are persisted this possibles values for the SOA Infrastructure audit level configuration property:
    Inherit     Inherits the audit level from infrastructure level.
    Off     No audit events (activity execution information) are persisted and no logging is performed; this can result in a slight performance boost for processing instances.
    Minimal     All events are logged; however, no audit details (variable content) are logged.
    Error     Logs only serious problems that require immediate attention from the administrator and are not caused by a bug in the product. Using this level can help performance.
    Production     All events are logged. The audit details for assign activities are not logged; the details for all other activities are logged.
    Development:     All events are logged; all audit details for all activities are logged.
    Thanks,

  • Search view configurations in SM_CRM

    Hello, experts!
    I have 2 Transaction type Service request: ZMRQ and YMRQ. This Documents ZMRQ and YMRQ  has different Z-fields.  I want that different searching view configurations were defined.
    I defined Logical Links:
    Is there is Parameter Class for search?
    How to configure that the Subobject type was defined ZMRQ in Search?

    Hi Savan Ithagani
    As I had mentioned in one of the post for this thread, the global table , which was filled before the right configuration is known, is used.
    So in the search.htm of the view you should use controller->get_possible_fields( ) should be used instead of the global table.
    If this is a problem wiht customer implementation therethe note1147827 is available for this.
    This is specific to opportunities.
    Hope this helps.
    regards
    Chitra
    Edited by: Chitra Ponraj on Jun 4, 2008 7:15 AM

  • Campaign - Need to provide 2 different View Configurations for same Role

    Hello,
    I need to provide for the same role config key 2 different view configurations for campaigns. Initially I wanted to do that with transaction types, but then I found out that there are no transaction types for campaigns.
    Does anyone know a way to do that? I don'T want to use a BADI for it, best would be a standard way.
    Thanks!

    You use Object Types to distinguish between views of same RoleConfigKey. In SPRO 'UI Framework Definition', you create object types and they would be available when you create a view config. Just select the object type as it forms part of the 'key' that idenitifies that particular view. In DO_CONFIG_DETERMINATION method of that view, you call a config based on this Object Type. So same view can produce two or more configs for same user in different scenarios.

  • Taking Back Up of View Configuration Changes

    Hi experts,
    One of our customers wants to discard the existing CRM development system and bring in a new one in that place.
    They have a way to save the workbench (code) changes, but no way to save the customizing changes.
    So, what they are saying is, the changes we made to view configurations will be lost.
    Is there any way to save these changes?
    What I think is, the view configuration changes are saved in the BSPC* tables. So we can take a backup of these tables, and restore them in the new system.
    Is it possible?
    As the quality system (to which the customizing changes are already transported) will remain, is it possible to use the transaction SCWB and import these requests from quality to the development system?
    Thanks and regards,
    Rohan.

    Hi,
        Check if you can use the report program BSP_DLC_TRANSPORT_CONFIG_TEXT. It can only create entries in a transport request for one component at a time. I'm sure you can create your own report based on it to fit your needs.
    Regards,
    Arun Prakash

  • WUI View configuration

    Hello experts!
    My task is hide in Z view configuration 2 fields, and set to one field "mandatory" attribute depending on value of field Rating.
    Example, if value of the field Rating = 01 -> hide field Partner Type.
    Is it possible through standard customizing? or it is development?
    Thanks in advance.

    Hi Johny,
    I hope this thread sort out your problem. Let me know if you need more clarification on this.
    http://scn.sap.com/thread/3522886
    Best regards,
    Dharmakasi.

  • Audit View Count (By opening, by Running,By Clicking a link)

    Hi, Running the query below and need to know if this one would give the exact count of any report viewed by running manually the report or view from instance or view by clicking a viewer link sent via email.
    Any help or ideas appreciated. I'm assuming this is the same for XIR2 and XI 3.1
    Thanks,
    SELECT
    top 1000
    AUDIT_EVENT.Start_Timestamp,
      AUDIT_EVENT.Event_ID,
      AUDIT_EVENT.Event_Type_ID,
      EVENT_TYPE.Event_Type_Description,
      DERIVED_OBJECT_NAME.Detail_Text,
      AUDIT_EVENT.User_Name
    FROM
      AUDIT_EVENT,
      EVENT_TYPE,
      (   select
         AUDIT_EVENT.Server_CUID, AUDIT_EVENT.Event_ID,  cast(AUDIT_DETAIL.Detail_Text as nvarchar(128)) as Detail_Text
              from AUDIT_EVENT, AUDIT_DETAIL
         where
         (AUDIT_EVENT.Server_CUID = AUDIT_DETAIL.Server_CUID) and
         (AUDIT_EVENT.Event_ID = AUDIT_DETAIL.Event_ID) and
         (AUDIT_DETAIL.Detail_Type_ID = 3)
      )  DERIVED_OBJECT_NAME
    WHERE
      ( AUDIT_EVENT.Event_Type_ID=EVENT_TYPE.Event_Type_ID  )
      AND  ( AUDIT_EVENT.Event_ID=DERIVED_OBJECT_NAME.Event_ID and AUDIT_EVENT.Server_CUID=DERIVED_OBJECT_NAME.Server_CUID  )
      AND    AUDIT_EVENT.Event_Type_ID  In  ( 131073,131074,196609,196610 ,65537 )

    I doubt that Auditing is same in R2 and 3.1. Client tool activity added from 3.
    From Xi 3 onwards, I think it shouldn't matter how you access the report. It should capture all the events.
    If you have Auditor configured, it comes with some standard reports. You can edit either "Least Accessed reports" or "Most Accessed Reports" and remove the Ranking from the reports. You'll get all reports statistics.
    Note: Refresh events are not captured in case of Crystal Reports.

  • Where can I take an SAP Audit Management configuration course.

    We need to start using the SAP Audit module in our company. We need to configure and use the transaction PLMD_AUDIT. Does anybody know if SAP has a course about it?
    Regards,
    Carlos Bermudez
    IT Audit Chief

    Hi Carlos,
    SAP Audit Management is part of SAP Assurance and Compliance Software
    This solution provides an end to end audit management solution.
    You may want to check the following link:
    Pages - SAP ERP Technical Audit
    http://isaca-sv.org/index.php?view=article&id=184&option=com_content&Itemid=4
    https://training3.sap.com/shop/course/oaum11-okp-sap-audit-management-11-e-learning-098-g-en/
    http://help.sap.com/saphelp_fra110/helpdata/en/dc/9a15520b48ba64e10000000a423f68/frameset.htm
    You can also navigate SAP ECC Audit Guideline through the following link:
    http://cayu.com.ar/files/sap/SAP%20ECC%20Audit%20Guidelines.pdf
    Thanks & Regards
    Subhasish

Maybe you are looking for