Auditing a Custom Import package
We are having issues with BPC data auditing on a custom import package. We are using the convert and dump load tasks just like in the standard import package. The difference is that we have those surrounded by other SSIS tasks to perform other pieces of the import process. The specific issue is that when we look at the detailed audit data, we are not seeing all of the records from our custom import. We usually see that the import package took place, but we also usually see only a small fraction (if any) of the actual records that were posted (and which we can see in BPC) in the audit.
My first question is, does the "Data Manager Import" option under the audit settings work with custom import packages using the convert and dump load tasks, or is it exclusive to the standard import package? Secondly, if it does work with custom import packages, what might be some causes and/or resolutions to this issue?
Just an update on the two issues that we are seeing...
First, I have tested the standard Import and the Append into Fact Table packages, and both are audited correctly and completely. This is important because our import package utilizes both of these styles of import. One set of data is transactional, so it is loaded similar to the Append into Fact Table package. The other set is a merge style import, so it is very similar to the standard import. I see all records in the AuditDataFincance table in the Extra database for both of these packages. This would lead me to believe that we are seeing some interference either between these two dump load tasks in the same package or some other SSIS package. It is important to note that these dump load tasks are wrapped in foreach loops to pickup all files in a directory. Looking at the package, my guess would be that either having two dump load tasks or having said tasks wrapped in a foreach loop would probably be the culprit. My next step will be to strip the package down to test just these pieces. Does anyone know if either of these would cause an issue with auditing?
Secondly, I stated that we are not seeing the temp audit files in the STAGED or LOADED folders, which is making it more difficult to debug this issue. After testing several packages, I noticed that the standard import and clear packages audit correctly, but they never create files in the STAGED or LOADED folders. However, the Append into Fact Table package DOES create these files. What I noticed in the AuditHdrFinance table in the Extra database was that the StagingCode values for these packages were different before they were loaded. A value of 0 signifies that the package has already been loaded. Append into Fact Table had a value of 1, which appears to signify that an audit file is waiting to be loaded in the STAGED directory. The others had a value of 2, which I am guessing signifies that they are currently being staged in memory or some other location. Does anyone have any information on what the different StagingCode values signify and why different packages have different codes?
Similar Messages
-
Is Custom print package "rotate to fit" still not implemented?
On Dec 2, Al-R started a discussion thead for LR3 beta about a problem he was having with rotating an image to fit a frame he created using the Custom Print Package. He couldn't get the image to rotate to fit. I get the sense that the "rotate to fit" check box wasn't available. I never downloaded the beta of LR3 so I don't know this for sure, but that seemed to be the case based on the dialogue in his thread.
Ian Lyons solved the mystery by pointing out that the Custom Print Package feature was not complete in the beta, and that Rotate To Fit was one of the things that hadn't been implemented. He said he expected it to be implemented in the final shipping release.
While the Rotate To Fit check box is now available in the Custom Print Packate (shipping version 3.0), it doesn't have the intended effect. When dropping a portrait image onto a landscape frame in the Custom Print Package, the frame is ignored and the image expands to fit the paper size. Checking Rotate To Fit on and off has no effect. The only work-around I have found is to rotate the image prior to dropping it on the frame. Once the orientations match, the image fills the frame properly.
Is this a case of the feature not making it into the final release, or is this a bug, or am I missing something really important here?
Thanks for your help,
CharlieWhat OS?
Don
Don Ricklin, MacBook 1.83Ghz Duo 2 Core running 10.4.9 & Win XP, Pentax *ist D
http://donricklin.blogspot.com/ -
Load of big files in BPC with import package
HI,
I need to import many files (.txt) with 1,5 million of data lines in BPC with import package.
But BPC is limited to 500 000 lines for each import.
Have you got a solution ?
Thanks,
MorgannMorgann,
You have two options.
1. use import into FACT table -> Cons : System will be offline. Pros : faster performance. No limit
2. if you should use import package, split file and put it into one folder and create a custom package that will handle those data file one by one. Cons : Need to make a custom package Pros : No system offline.
I hope it will help you.
Thanks.
James Lim -
Import package needs to show extra info in the log.
Hi,
I have a problem regarding an import package.
I am trying to edit in a way, that in the package log I get details about for which entity, time and category the import has run. Is this possible?
Regards, Tim VierhoutYes I know about this, but customer is coming from V4, where they had a log for which ENTITY/CATEGORY/Time period the import has run. And also when import ran without errors.
I have already created a workaround with adding a logic task to the import containing a logic which writes no records but does return a member selection log, only I was wondering if there was a easier way to get the same result.
-Tim -
How is the 'import-packages' information saved in the database, and how long?
Hello,
I am developping a ECM Connector for Adobe LiveCycle ES, which is a customized component.
1 - Who should I contact to have some specific support ?
There is no detailed information yet on this on the adobe site (http://livedocs.adobe.com/livecycle/8.2/programLC/programmer/help/wwhelp/wwhimpl/js/html/w whelp.htm?href=000931.html&accessible=true) .
If you think that I should address my problem to another department of Adobe, please tell me which department?
I give you another description of my problem. In fact, I have been investigating on it.
2 - If I put this in my component.xml file, in step 1:
<component-id>com.rsd.adobe.livecycle.RSDFoldersConnector</component-id>
<version>1.0</version>
<import-packages><package version="1.0">com.rsd.simpleApiFolders</package> </import-packages>
If I change the version to 1.1 and remove the 'import-packages' (in step 2) , will the new component need the com.rsd.simpleApiFolders package. It seems that is still needs it.
3 - How is the 'import-packages' information saved in the database, and how long?
In fact, on thursday, I used 'import-packages' to make a test. And since them, I can not deploy any of my components.
LiveCycle throws a ClassNotFoundException.
ALC-DSC-000-000: com.adobe.idp.dsc.DSCRuntimeException: Internal error.
[java] at com.adobe.idp.dsc.registry.component.impl.ComponentRegistryImpl$6.doInTransaction(Compone ntRegistryImpl.java:338)
... Caused by: java.lang.ClassNotFoundException: http-0.0.0.0-8080-1Class name com.rsd.simpleApiFolders.Context from package com.rsd.simpleApiFolders not found.
[java] at com.adobe.idp.dsc.DSContainerSearchPolicy.searchClassUsingParentFirst(DSContainerSearchPo licy.java:234)
Thank you in advance
Regards.1 - Who should I contact to have some specific support ?
That would depend on your Adobe support contract and if your organization has a TAM assigned. You should check with your organization's Adobe contact and see what support options your organization has purchased.
Having said that, this forum has a few people that may be able to help (but the forum does not have a SLA associated with it)
2 - If I put this in my component.xml file, in step 1:
<component-id>com.rsd.adobe.livecycle.RSDFoldersConnector</component-id>
<version>1.0</version>
<import-packages><package version="1.0">com.rsd.simpleApiFolders</package> </import-packages>
If I change the version to 1.1 and remove the 'import-packages' (in step 2) , will the new component need the com.rsd.simpleApiFolders package. It seems that is still needs it.If your component class needs the simpleApiFolders class then yes, you still need it. Think of import-packages like a class-path statement (but with packages and not jars). Its not physically moving the package into your application, but allowing you to access it from another container.
3 - How is the 'import-packages' information saved in the database, and how long?
As far as I know they are not imported into the database. As I stated above, I believe that the import-packages just allows you to point to classes that are in the app server's classpath, but are not physically in you component jar file. As long as that class is in the app server class-path (or in the Adobe EAR file) then you should be able to access it. Is the jar file containing the simpleApiFolders class in the app server's lib directory? -
Hi All,
I am stuck with code compilation problem. Seeking Help.
I have 2 source files. One is compiled and I am using this compiled file as an import in my other source file.
Both the source files are in different packages.
When I go ahead and compile my source file which using the other one as an import then I get the error stating that the package which I have used as the import does not exists.
I have tried to compile setting that package in classpath as well. But, no luck.
I have used various compiling options with javac, like, -classpath, -cp, -sourcepath, but still no luck.
The directory structure I am having is like this
C:\...\com\example\web\Selector.java and
C:\...\com\example\model\Expert.java I am trying to import
com.example.model.Expert.java into
com.example.web.Selector.java Help needed regarding how to compile successfully Selector.java
I will really appreciate any suggestions from you guys.
Thanks and Regards
AnimeshHi,
Guys please do not take the literal meaning with the line saying I am importing C\...com\example\model\Expert.java into C\...com\example\web\Selector.java .
I know we cannot import file, we do import classes in java.
The problem is still the same I am trying to compile my source code with custom made package import and it is not compiling.
Please help. I will really appreciate useful suggestions.
Thanks and Regards.
Animesh -
PI 711 Installation: Loading of 'SAPNTAB' import package: error but no log
Hello,
I'm perfromong an installation of a SAP PI 7.11 ystem on windoows Server 2003 and Oracle 10.2 .
I've perfromed the installation of the DEV system without particular issue.
But now when tryning to install the QAS system , I can't finish the installation : Im' stuck in the import ABAP step ...
It is impossible to import the 'SAPNTAB' package. I couln't find the reason.
I've tried updating the R3load binary, rebooting the server, restarting the instalaltion from scratch but it didn't help.
Here I provide you the logs, maybe you can help me
SAPNTAB.log
E:\usr\sap\PIQ\SYS\exe\uc\NTAMD64\R3load.exe: START OF LOG: 20110223195542
E:\usr\sap\PIQ\SYS\exe\uc\NTAMD64\R3load.exe: sccsid @(#) $Id: //bas/711_REL/src/R3ld/R3load/R3ldmain.c#6 $ SAP
E:\usr\sap\PIQ\SYS\exe\uc\NTAMD64\R3load.exe: version R7.11/V1.4 [UNICODE]
Compiled Dec 14 2010 22:52:23
E:\usr\sap\PIQ\SYS\exe\uc\NTAMD64\R3load.exe -i SAPNTAB.cmd -dbcodepage 4103 -l SAPNTAB.log -stop_on_error -loadprocedure fast
DbSl Trace: ORA-1403 when accessing table SAPUSER
(DB) INFO: connected to DB
(DB) INFO: DbSlControl(DBSL_CMD_NLS_CHARACTERSET_GET): UTF8
(DB) INFO: SVERS deleted/truncated #20110223195543
sapinst_dev.log
Syslib info about system call. OS message 109 (The pipe has been ended.
) after execution of system call 'ReadFile' with parameter ((read end of child process output pipe)), line (403) in file (synxcpipe.cpp).
WARNING 2011-02-23 19:56:12.607
CJSlibModule::writeWarning_impl()
Execution of the command ""C:\Program Files\sapinst_instdir\NW71\INSTALL\SYSTEM\ORA\STD\AS\sapjvm\sapjvm_5\bin\java.exe" -classpath migmon.jar -showversion -Xmx1024m com.sap.inst.migmon.imp.ImportMonitor -sapinst" finished with return code 103. Output:
java version "1.5.0_14"
Java(TM) 2 Runtime Environment, Standard Edition (build 5.1.024)
SAP Java 64-Bit Server VM (build 5.1.024, Sep 4 2008 23:21:58 - 51_REL - optU - windows amd64 - bas2:106386 (mixed mode))
Import Monitor jobs: running 1, waiting 28, completed 0, failed 0, total 29.
Loading of 'SAPNTAB' import package: ERROR
Import Monitor jobs: running 0, waiting 28, completed 0, failed 1, total 29.
TRACE 2011-02-23 19:56:12.607
Function setMessageIdOfExceptionMessage: nw.programError
ERROR 2011-02-23 19:56:12.607
CJSlibModule::writeError_impl()
CJS-30022 Program 'Migration Monitor' exits with error code 103. For details see log file(s) import_monitor.java.log, import_monitor.log.
import_monitor.log
TRACE: 2011-02-23 19:55:42 com.sap.inst.migmon.imp.ImportStandardTask preCreate
Parse of 'C:\Program Files\sapinst_instdir\NW71\INSTALL\SYSTEM\ORA\STD\AS\DDLORA.TPL' template file is started.
INFO: 2011-02-23 19:55:42 com.sap.inst.migmon.imp.ImportStandardTask preCreate
Parse of 'C:\Program Files\sapinst_instdir\NW71\INSTALL\SYSTEM\ORA\STD\AS\DDLORA.TPL' template file is successfully completed.
Primary key creation: after load.
Index creation: after load.
INFO: 2011-02-23 19:55:42
Data codepage 1100 is determined using TOC file 'E:\SAPCD\51036706\DATA_UNITS\EXP1\DATA\REPOSRC.TOC' for package 'REPOSRC'.
INFO: 2011-02-23 19:55:42
Version table 'SVERS' is found in STR file 'E:\SAPCD\51036706\DATA_UNITS\EXP3\DATA\SAPNTAB.STR' from package 'SAPNTAB'.
INFO: 2011-02-23 19:55:42
Data conversion tables 'DDNTF,DDNTF_CONV_UC,DDNTT,DDNTT_CONV_UC' are found in STR file 'E:\SAPCD\51036706\DATA_UNITS\EXP3\DATA\SAPNTAB.STR' from package 'SAPNTAB'.
TRACE: 2011-02-23 19:55:42 com.sap.inst.migmon.LoadTask run
Loading of 'SAPNTAB' import package is started.
TRACE: 2011-02-23 19:55:42 com.sap.inst.migmon.LoadTask processPackage
Loading of 'SAPNTAB' import package into database:
E:\usr\sap\PIQ\SYS\exe\uc\NTAMD64\R3load.exe -i SAPNTAB.cmd -dbcodepage 4103 -l SAPNTAB.log -stop_on_error -loadprocedure fast
ERROR: 2011-02-23 19:55:45 com.sap.inst.migmon.LoadTask run
Loading of 'SAPNTAB' import package is interrupted with R3load error.
Process 'E:\usr\sap\PIQ\SYS\exe\uc\NTAMD64\R3load.exe -i SAPNTAB.cmd -dbcodepage 4103 -l SAPNTAB.log -stop_on_error -loadprocedure fast' exited with return code -1,073,741,819.
For mode details see 'SAPNTAB.log' file.
Standard error output:
sapparam: sapargv(argc, argv) has not been called!
sapparam(1c): No Profile used.
sapparam: SAPSYSTEMNAME neither in Profile nor in Commandline
WARNING: 2011-02-23 19:56:12
Cannot continue import because not all import packages with data conversion tables are loaded successfully.
WARNING: 2011-02-23 19:56:12
1 error(s) during processing of packages.
INFO: 2011-02-23 19:56:12
Import Monitor is stopped.
Edited by: Raoul Shiro on Feb 23, 2011 8:11 PM
Edited by: Raoul Shiro on Feb 23, 2011 8:12 PMHello,
Thank you for your answer.
I already opened a sap cutomer call, they answered that it it not a database issue,
I restarted the installationfriom scracth , but i still got the same error :
Here is the full content of the file SAPNTAB.log
E:\usr\sap\PIQ\SYS\exe\uc\NTAMD64\R3load.exe: START OF LOG: 20110225170643
E:\usr\sap\PIQ\SYS\exe\uc\NTAMD64\R3load.exe: sccsid @(#) $Id: //bas/711_REL/src/R3ld/R3load/R3ldmain.c#4 $ SAP
E:\usr\sap\PIQ\SYS\exe\uc\NTAMD64\R3load.exe: version R7.11/V1.4 [UNICODE]
Compiled Dec 22 2008 00:13:12
E:\usr\sap\PIQ\SYS\exe\uc\NTAMD64\R3load.exe -ctf I E:\SAPCD\51036706\DATA_UNITS\EXP3\DATA\SAPNTAB.STR C:\Program Files\sapinst_instdir\NW71\INSTALL\SYSTEM\ORA\STD\AS\DDLORA.TPL SAPNTAB.TSK ORA -l SAPNTAB.log
E:\usr\sap\PIQ\SYS\exe\uc\NTAMD64\R3load.exe: job completed
E:\usr\sap\PIQ\SYS\exe\uc\NTAMD64\R3load.exe: END OF LOG: 20110225170643
E:\usr\sap\PIQ\SYS\exe\uc\NTAMD64\R3load.exe: START OF LOG: 20110225170643
E:\usr\sap\PIQ\SYS\exe\uc\NTAMD64\R3load.exe: sccsid @(#) $Id: //bas/711_REL/src/R3ld/R3load/R3ldmain.c#4 $ SAP
E:\usr\sap\PIQ\SYS\exe\uc\NTAMD64\R3load.exe: version R7.11/V1.4 [UNICODE]
Compiled Dec 22 2008 00:13:12
E:\usr\sap\PIQ\SYS\exe\uc\NTAMD64\R3load.exe -i SAPNTAB.cmd -dbcodepage 4103 -l SAPNTAB.log -stop_on_error -loadprocedure fast
DbSl Trace: ORA-1403 when accessing table SAPUSER
(DB) INFO: connected to DB
(DB) INFO: DbSlControl(DBSL_CMD_NLS_CHARACTERSET_GET): UTF8
(DB) INFO: SVERS created #20110225170643
Regards.
Raoul -
Loading of 'SEOCOMPODF' import package is interrupted with R3load error.
Dear SAP Colleagues,
Please advice with the following, we try to install SAP ERP 6.0 support release 3 on windows 2008 server with oracle database 10g 10.2.0.4.0,
The error is occurred in Import ABAP phase as follow,
ERROR 2010-10-14 12:10:00.729
CJS-30022 Program 'Migration Monitor' exits with error code 103. For details see log file(s) import_monitor.java.log, import_monitor.log.
Hint : I already applied this scenario of installation in two other server with same hardware and sap software and itu2019s already up and running,
From my side I applied the following but nothing is changed,
u2022 Applied sap Note 709389
u2022 Replaced the sap source more times,
u2022 Maintained the paging file,
u2022 Restart the sap server
u2022 Restart the installation from scratch
Also I can see that the oracle service and listener is started automatically
I checked the log files mentioned above as follow,
Contents in log file u201Cimport_monitor.javau201D
java version "1.4.2_17"
Java(TM) 2 Runtime Environment, Standard Edition (build 1.4.2_17-b06)
Java HotSpot(TM) Client VM (build 1.4.2_17-b06, mixed mode)
Import Monitor jobs: running 1, waiting 4, completed 23, failed 0, total 28.
Import Monitor jobs: running 2, waiting 3, completed 23, failed 0, total 28.
Import Monitor jobs: running 3, waiting 2, completed 23, failed 0, total 28.
Loading of 'SEOCOMPODF' import package: ERROR
Loading of 'DD03L' import package: ERROR
Import Monitor jobs: running 0, waiting 2, completed 23, failed 3, total 28.
Loading of 'FUPARAREF' import package: ERROR
Import Monitor jobs: running 0, waiting 2, completed 23, failed 3, total 28.
Import Monitor jobs: running 0, waiting 2, completed 23, failed 3, total 28.
Import Monitor jobs: running 1, waiting 1, completed 23, failed 3, total 28.
Loading of 'TODIR' import package: ERROR
Import Monitor jobs: running 0, waiting 1, completed 23, failed 4, total 28.
Contents in log file u201Cimport_monitoru201D
ERROR: 2010-10-14 12:09:04 com.sap.inst.migmon.LoadTask run
Loading of 'SEOCOMPODF' import package is interrupted with R3load error.
Process 'D:\usr\sap\ECP\SYS\exe\uc\NTAMD64\R3load.exe -i SEOCOMPODF.cmd -dbcodepage 4103 -l SEOCOMPODF.log -stop_on_error' exited with return code 2.
For mode details see 'SEOCOMPODF.log' file.
Standard error output:
sapparam: sapargv( argc, argv) has not been called.
sapparam(1c): No Profile used.
sapparam: SAPSYSTEMNAME neither in Profile nor in Commandline
ERROR: 2010-10-14 12:09:04 com.sap.inst.migmon.LoadTask run
Loading of 'DD03L' import package is interrupted with R3load error.
Process 'D:\usr\sap\ECP\SYS\exe\uc\NTAMD64\R3load.exe -i DD03L.cmd -dbcodepage 4103 -l DD03L.log -stop_on_error' exited with return code 2.
For mode details see 'DD03L.log' file.
Standard error output:
sapparam: sapargv( argc, argv) has not been called.
sapparam(1c): No Profile used.
sapparam: SAPSYSTEMNAME neither in Profile nor in Commandline
ERROR: 2010-10-14 12:09:04 com.sap.inst.migmon.LoadTask run
Loading of 'FUPARAREF' import package is interrupted with R3load error.
Process 'D:\usr\sap\ECP\SYS\exe\uc\NTAMD64\R3load.exe -i FUPARAREF.cmd -dbcodepage 4103 -l FUPARAREF.log -stop_on_error' exited with return code 2.
For mode details see 'FUPARAREF.log' file.
Standard error output:
sapparam: sapargv( argc, argv) has not been called.
sapparam(1c): No Profile used.
sapparam: SAPSYSTEMNAME neither in Profile nor in Commandline
TRACE: 2010-10-14 12:09:30 com.sap.inst.migmon.LoadTask run
Loading of 'TODIR' import package is started.
TRACE: 2010-10-14 12:09:30 com.sap.inst.migmon.LoadTask processPackage
Loading of 'TODIR' import package into database:
D:\usr\sap\ECP\SYS\exe\uc\NTAMD64\R3load.exe -i TODIR.cmd -dbcodepage 4103 -l TODIR.log -stop_on_error
ERROR: 2010-10-14 12:09:30 com.sap.inst.migmon.LoadTask run
Loading of 'TODIR' import package is interrupted with R3load error.
Process 'D:\usr\sap\ECP\SYS\exe\uc\NTAMD64\R3load.exe -i TODIR.cmd -dbcodepage 4103 -l TODIR.log -stop_on_error' exited with return code 2.
For mode details see 'TODIR.log' file.
Standard error output:
sapparam: sapargv( argc, argv) has not been called.
sapparam(1c): No Profile used.
sapparam: SAPSYSTEMNAME neither in Profile nor in Commandline
WARNING: 2010-10-14 12:10:00
Cannot start import of packages with views because not all import packages with tables are loaded successfully.
WARNING: 2010-10-14 12:10:00
4 error(s) during processing of packages.
INFO: 2010-10-14 12:10:00
Import Monitor is stopped.
Regards,
Ahmed SaberHi Gagan Deep Kaushal,
The todir.log file it was so big so I backup it run the installation again to regenerate the log file, please find below the log file you requested,
D:\usr\sap\ECP\SYS\exe\uc\NTAMD64\R3load.exe: START OF LOG: 20101014135456
D:\usr\sap\ECP\SYS\exe\uc\NTAMD64\R3load.exe: sccsid @(#) $Id: //bas/700_REL/src/R3ld/R3load/R3ldmain.c#14 $ SAP
D:\usr\sap\ECP\SYS\exe\uc\NTAMD64\R3load.exe: version R7.00/V1.4 [UNICODE]
Compiled Jan 24 2008 01:41:44
D:\usr\sap\ECP\SYS\exe\uc\NTAMD64\R3load.exe -i TODIR.cmd -dbcodepage 4103 -l TODIR.log -stop_on_error
DbSl Trace: OCI-call 'OCISessionBegin' failed with rc=1034
DbSl Trace: CONNECT failed with sql error '1034'
DbSl Trace: OCI-call 'OCISessionBegin' failed with rc=1034
DbSl Trace: CONNECT failed with sql error '1034'
(DB) ERROR: db_connect rc = 256
DbSl Trace: OCI-call 'OCISessionBegin' failed with rc=1034
DbSl Trace: CONNECT failed with sql error '1034'
DbSl Trace: OCI-call 'OCISessionBegin' failed with rc=1034
DbSl Trace: CONNECT failed with sql error '1034'
(DB) ERROR: DbSlErrorMsg rc = 99
D:\usr\sap\ECP\SYS\exe\uc\NTAMD64\R3load.exe: job finished with 1 error(s)
D:\usr\sap\ECP\SYS\exe\uc\NTAMD64\R3load.exe: END OF LOG: 20101014135457
Regards,
Ahmed Saber -
SAPAPPL0,SAPSSEXC,SAPAPPL2 import package is interrupted with R3load
Hi SAP Experts,
I am installing ECC 6.0 SR1 EHP4 with DB29.1 on AIX6.1 but durning Import ABAP , I am getting error
SAPAPPL2' import package is interrupted with R3load error.
SAPAPPL0' import package is interrupted with R3load error.
SAPSSEXC' import package is interrupted with R3load error.
I am attaching all the logs import_monitor,import_monitor.java, SAPAPPL2,SAPAPPL0,SAPSSEXC
Kindly help me to come out from this error.
Import_monitor----
TRACE: 2010-08-19 22:16:46 com.sap.inst.migmon.LoadTask processPackage
Loading of 'SAPAPPL0' import package into database:
/usr/sap/LD1/SYS/exe/run/R3load -i SAPAPPL0.cmd -dbcodepage 4102 -l SAPAPPL0.log -stop_on_error -loadprocedure fast LOAD
ERROR: 2010-08-19 22:16:47 com.sap.inst.migmon.LoadTask run
Loading of 'SAPAPPL2' import package is interrupted with R3load error.
Process '/usr/sap/LD1/SYS/exe/run/R3load -i SAPAPPL2.cmd -dbcodepage 4102 -l SAPAPPL2.log -stop_on_error -loadprocedure fast LOAD' exited with return code 2.
For mode details see 'SAPAPPL2.log' file.
Standard error output:
sapparam: sapargv( argc, argv) has not been called.
sapparam(1c): No Profile used.
sapparam: SAPSYSTEMNAME neither in Profile nor in Commandline
ERROR: 2010-08-19 22:16:47 com.sap.inst.migmon.LoadTask run
Loading of 'SAPSSEXC' import package is interrupted with R3load error.
Process '/usr/sap/LD1/SYS/exe/run/R3load -i SAPSSEXC.cmd -dbcodepage 4102 -l SAPSSEXC.log -stop_on_error -loadprocedure fast LOAD' exited with return code 2.
For mode details see 'SAPSSEXC.log' file.
Standard error output:
sapparam: sapargv( argc, argv) has not been called.
sapparam(1c): No Profile used.
sapparam: SAPSYSTEMNAME neither in Profile nor in Commandline
ERROR: 2010-08-19 22:18:00 com.sap.inst.migmon.LoadTask run
Loading of 'SAPAPPL0' import package is interrupted with R3load error.
Process '/usr/sap/LD1/SYS/exe/run/R3load -i SAPAPPL0.cmd -dbcodepage 4102 -l SAPAPPL0.log -stop_on_error -loadprocedure fast LOAD' exited with return code 2.
For mode details see 'SAPAPPL0.log' file.
Standard error output:
sapparam: sapargv( argc, argv) has not been called.
sapparam(1c): No Profile used.
sapparam: SAPSYSTEMNAME neither in Profile nor in Commandline
WARNING: 2010-08-19 22:18:14
Cannot start import of packages with views because not all import packages with tables are loaded successfully.
WARNING: 2010-08-19 22:18:14
3 error(s) during processing of packages.
INFO: 2010-08-19 22:18:14
Import Monitor is stopped.
SAPAPPL2
/usr/sap/LD1/SYS/exe/run/R3load: START OF LOG: 20100819221646
/usr/sap/LD1/SYS/exe/run/R3load: sccsid @(#) $Id: //bas/701_REL/src/R3ld/R3load/R3ldmain.c#5 $ SAP
/usr/sap/LD1/SYS/exe/run/R3load: version R7.01/V1.4 [UNICODE]
Compiled Feb 24 2009 21:54:08
/usr/sap/LD1/SYS/exe/run/R3load -i SAPAPPL2.cmd -dbcodepage 4102 -l SAPAPPL2.log -stop_on_error -loadprocedure fast LOAD
(DB) INFO: connected to DB
(TSK) ERROR: file /tmp/sapinst_instdir/ERPEhP4/AS-ABAP/DB6/CENTRAL/SAPAPPL2.TSK.bck already seems to exist
a previous run may not have been finished cleanly
file /tmp/sapinst_instdir/ERPEhP4/AS-ABAP/DB6/CENTRAL/SAPAPPL2.TSK possibly corrupted
/usr/sap/LD1/SYS/exe/run/R3load: job finished with 1 error(s)
/usr/sap/LD1/SYS/exe/run/R3load: END OF LOG: 20100819221647
SAPAPPL0
/usr/sap/LD1/SYS/exe/run/R3load: START OF LOG: 20100819221646
/usr/sap/LD1/SYS/exe/run/R3load: sccsid @(#) $Id: //bas/701_REL/src/R3ld/R3load/R3ldmain.c#5 $ SAP
/usr/sap/LD1/SYS/exe/run/R3load: version R7.01/V1.4 [UNICODE]
Compiled Feb 24 2009 21:54:08
/usr/sap/LD1/SYS/exe/run/R3load -i SAPAPPL0.cmd -dbcodepage 4102 -l SAPAPPL0.log -stop_on_error -loadprocedure fast LOAD
(DB) INFO: connected to DB
(DB) INFO: /1CN/CPTSAP00005 dropped #20100819221758
(DB) INFO: /1CN/CPTSAP00005 created #20100819221759
(DB) INFO: /1CN/CPTSAP00005~0 created #20100819221759
(DB) INFO: /1CN/CPTSAP00005SC created #20100819221759
(IMP) INFO: import of /1CN/CPTSAP00005 completed (0 rows) #20100819221759
(DB) ERROR: DDL statement failed
( CREATE TABLE "/1CN/CPTSAP00006" ( "CLIENT" SAPDB6FIXCHAR(3) DEFAULT '000' NOT NULL , "VARNUMH" CHAR(16) FOR BIT DATA NOT NULL , "PRT_PARTNER" CHAR(16) FOR BIT DATA NOT NULL , "KSCHL" SAPDB6CHAR(4) DEFAULT ' ' NOT NULL , "OBJECT_ID" CHAR(16) FOR BIT DATA , "TIMESTAMP_TO" SAPDB6CHAR(14) DEFAULT ' ' NOT NULL , "RELEASE_STATUS" SAPDB6FIXCHAR(1) DEFAULT ' ' NOT NULL , "TIMESTAMP_FROM" SAPDB6CHAR(14) DEFAULT ' ' NOT NULL , "KSCHL_SUPP" SAPDB6CHAR(4) DEFAULT ' ' NOT NULL , "COND_GROUP_ID" CHAR(16) FOR BIT DATA , "MAINT_STATUS" SAPDB6CHAR(2) DEFAULT ' ' NOT NULL , "CREATED_BY" SAPDB6CHAR(12) DEFAULT ' ' NOT NULL , "CREATED_ON" SAPDB6CHAR(8) DEFAULT '00000000' NOT NULL , "KOPOS" SAPDB6FIXCHAR(3) DEFAULT '000' NOT NULL , "SUPP_EXIST" SAPDB6FIXCHAR(1) DEFAULT ' ' NOT NULL , "SCALE_DIM" SAPDB6FIXCHAR(2) DEFAULT '00' NOT NULL , "KBETR" DECIMAL(15,2) DEFAULT 0 NOT NULL , "KPEIN" DECIMAL(5,0) DEFAULT 0 NOT NULL , "KMEIN" SAPDB6CHAR(3) DEFAULT ' ' NOT NULL , "KONWA" SAPDB6CHAR(5) DEFAULT ' ' NOT NULL , "KRECH" SAPDB6CHAR(3) DEFAULT ' ' NOT NULL ) IN LD1#STABD INDEX IN LD1#STABI LONG IN LD1#STABD )
dsql_exec_immediate returned DS_DBOBJECTEXISTS
(DB) INFO: disconnected from DB
/usr/sap/LD1/SYS/exe/run/R3load: job finished with 1 error(s)
/usr/sap/LD1/SYS/exe/run/R3load: END OF LOG: 20100819221800
SAPSSEXC
/usr/sap/LD1/SYS/exe/run/R3load: START OF LOG: 20100819221646
/usr/sap/LD1/SYS/exe/run/R3load: sccsid @(#) $Id: //bas/701_REL/src/R3ld/R3load/R3ldmain.c#5 $ SAP
/usr/sap/LD1/SYS/exe/run/R3load: version R7.01/V1.4 [UNICODE]
Compiled Feb 24 2009 21:54:08
/usr/sap/LD1/SYS/exe/run/R3load -i SAPSSEXC.cmd -dbcodepage 4102 -l SAPSSEXC.log -stop_on_error -loadprocedure fast LOAD
(DB) INFO: connected to DB
(DB) INFO: BRATEXT dropped #20100819221647
(DB) INFO: BRATEXT created #20100819221647
(DB) INFO: BRATEXT~0 created #20100819221647
(IMP) INFO: import of BRATEXT completed (0 rows) #20100819221647
(DB) ERROR: DDL statement failed
( CREATE TABLE "D010INC" ( "MASTER" SAPDB6CHAR(40) DEFAULT ' ' NOT NULL , "INCLUDE" SAPDB6CHAR(40) DEFAULT ' ' NOT NULL ) IN LD1#ES701D INDEX IN LD1#ES701I LONG IN LD1#ES701D )
dsql_exec_immediate returned DS_DBOBJECTEXISTS
(DB) INFO: disconnected from DB
/usr/sap/LD1/SYS/exe/run/R3load: job finished with 1 error(s)
/usr/sap/LD1/SYS/exe/run/R3load: END OF LOG: 20100819221647
IMPORT_MONITOR.JAVA
java version "1.4.2"
Java(TM) 2 Runtime Environment, Standard Edition (build 2.3)
IBM J9 VM (build 2.3, J2RE 1.4.2 IBM J9 2.3 AIX ppc64-64 j9ap64142ifx-20100615 (JIT enabled)
J9VM - 20100610_59470_BHdSMr
JIT - 20090210_1447ifx2_r8
GC - 200902_24)
Import Monitor jobs: running 1, waiting 3, completed 24, failed 0, total 28.
Import Monitor jobs: running 2, waiting 2, completed 24, failed 0, total 28.
Import Monitor jobs: running 3, waiting 1, completed 24, failed 0, total 28.
Loading of 'SAPAPPL2' import package: ERROR
Import Monitor jobs: running 2, waiting 1, completed 24, failed 1, total 28.
Loading of 'SAPSSEXC' import package: ERROR
Import Monitor jobs: running 1, waiting 1, completed 24, failed 2, total 28.
Loading of 'SAPAPPL0' import package: ERROR
Import Monitor jobs: running 0, waiting 1, completed 24, failed 3, total 28.
PLEASE HELP ANYONE TO RESOLVE THIS ERRORSAPINST.LOG
INFO 2021-03-23 14:09:35
Copied file 'C:/Program Files/sapinst_instdir/ERP/SYSTEM/ORA/CENTRAL/AS/inifile.xml' to 'C:/Program Files/sapinst_instdir/ERP/SYSTEM/ORA/CENTRAL/AS/inifile.14.xml'.
INFO 2021-03-23 14:09:36
Copied file 'C:/Program Files/sapinst_instdir/ERP/SYSTEM/ORA/CENTRAL/AS/inifile.xml' to 'C:/Program Files/sapinst_instdir/ERP/SYSTEM/ORA/CENTRAL/AS/inifile.15.xml'.
INFO 2021-03-23 14:09:40
Execute step
Component W2K_ServicePack_Check|ind|ind|ind|ind
Preprocess of component |NW_Onehost|ind|ind|ind|ind|0|0|NW_First_Steps|ind|ind|ind|ind|0|0|W2K_ServicePack_Check|ind|ind|ind|ind|2|0.
INFO 2021-03-23 14:10:04
Copied file 'C:/Program Files/sapinst_instdir/ERP/SYSTEM/ORA/CENTRAL/AS/keydb.xml' to 'C:/Program Files/sapinst_instdir/ERP/SYSTEM/ORA/CENTRAL/AS/keydb.8.xml'.
INFO 2021-03-23 14:10:04
Execute step runMigrationMonitor of component |NW_Onehost|ind|ind|ind|ind|0|0|NW_Onehost_System|ind|ind|ind|ind|1|0|NW_CreateDBandLoad|ind|ind|ind|ind|10|0|NW_ABAP_Import_Dialog|ind|ind|ind|ind|5|0|NW_ABAP_Import|ind|ind|ind|ind|0|0.
WARNING 2021-03-23 14:10:11
Error 5 (Access is denied.) in execution of a 'RegOpenKeyEx' function, line (645), with parameter (S-1-5-21-1712382466-689420201-920741312-1010).
WARNING 2021-03-23 14:10:11
Error 5 (Access is denied.) in execution of a 'RegOpenKeyEx' function, line (645), with parameter (ProtectedRoots).
INFO 2021-03-23 14:10:11
Switched to user: rasadm.
INFO 2021-03-23 14:10:11
Creating file C:\Program Files\sapinst_instdir\ERP\SYSTEM\ORA\CENTRAL\AS\import_monitor.java.log.
INFO 2021-03-23 14:10:11
Switched to user: rasadm.
INFO 2021-03-23 14:10:11
Working directory changed to C:\Program Files\sapinst_instdir\ERP\SYSTEM\ORA\CENTRAL\AS.
INFO 2021-03-23 14:10:11
Output of C:\j2sdk1.4.2_13\bin\java.exe -classpath migmon.jar -showversion com.sap.inst.migmon.imp.ImportMonitor -dbType ORA -importDirs "D:\SAP IDES 60\SAP_ERP60_IDES_Export\51032413_1\EXP1;D:\SAP IDES 60\SAP_ERP60_IDES_Export\51032413_2\EXP2;D:\SAP IDES 60\SAP_ERP60_IDES_Export\51032413_3\EXP3;D:\SAP IDES 60\SAP_ERP60_IDES_Export\51032413_4\EXP4;D:\SAP IDES 60\SAP_ERP60_IDES_Export\51032413_5\EXP5;D:\SAP IDES 60\SAP_ERP60_IDES_Export\51032413_6\EXP6;D:\SAP IDES 60\SAP_ERP60_IDES_Export\51032413_6\EXP7;D:\SAP IDES 60\SAP_ERP60_IDES_Export\51032413_6\EXP8;D:\SAP IDES 60\SAP_ERP60_IDES_Export\51032413_6\EXP9;D:\SAP IDES 60\SAP_ERP60_IDES_Export\51032413_6\EXP10;D:\SAP IDES 60\SAP_ERP60_IDES_Export\51032413_6\EXP11" -installDir "C:\Program Files\sapinst_instdir\ERP\SYSTEM\ORA\CENTRAL\AS" -orderBy "" -r3loadExe H:\usr\sap\RAS\SYS\exe\uc\NTI386\R3load.exe -tskFiles yes -extFiles yes -dbCodepage 4103 -jobNum 3 -monitorTimeout 30 -loadArgs " -stop_on_error" -trace all -sapinst is written to the logfile import_monitor.java.log.
WARNING 2021-03-23 14:10:43
Execution of the command "C:\j2sdk1.4.2_13\bin\java.exe -classpath migmon.jar -showversion com.sap.inst.migmon.imp.ImportMonitor -dbType ORA -importDirs "D:\SAP IDES 60\SAP_ERP60_IDES_Export\51032413_1\EXP1;D:\SAP IDES 60\SAP_ERP60_IDES_Export\51032413_2\EXP2;D:\SAP IDES 60\SAP_ERP60_IDES_Export\51032413_3\EXP3;D:\SAP IDES 60\SAP_ERP60_IDES_Export\51032413_4\EXP4;D:\SAP IDES 60\SAP_ERP60_IDES_Export\51032413_5\EXP5;D:\SAP IDES 60\SAP_ERP60_IDES_Export\51032413_6\EXP6;D:\SAP IDES 60\SAP_ERP60_IDES_Export\51032413_6\EXP7;D:\SAP IDES 60\SAP_ERP60_IDES_Export\51032413_6\EXP8;D:\SAP IDES 60\SAP_ERP60_IDES_Export\51032413_6\EXP9;D:\SAP IDES 60\SAP_ERP60_IDES_Export\51032413_6\EXP10;D:\SAP IDES 60\SAP_ERP60_IDES_Export\51032413_6\EXP11" -installDir "C:\Program Files\sapinst_instdir\ERP\SYSTEM\ORA\CENTRAL\AS" -orderBy "" -r3loadExe H:\usr\sap\RAS\SYS\exe\uc\NTI386\R3load.exe -tskFiles yes -extFiles yes -dbCodepage 4103 -jobNum 3 -monitorTimeout 30 -loadArgs " -stop_on_error" -trace all -sapinst" finished with return code 103. Output:
java version "1.4.2_13"
Java(TM) 2 Runtime Environment, Standard Edition (build 1.4.2_13-b06)
Java HotSpot(TM) Client VM (build 1.4.2_13-b06, mixed mode)
Import Monitor jobs: running 1, waiting 3, completed 15, failed 0, total 19.
Import Monitor jobs: running 2, waiting 2, completed 15, failed 0, total 19.
Import Monitor jobs: running 3, waiting 1, completed 15, failed 0, total 19.
Loading of 'SAPAPPL0' import package: ERROR
Loading of 'SAPSSEXC' import package: ERROR
Import Monitor jobs: running 1, waiting 1, completed 15, failed 2, total 19.
Import Monitor jobs: running 1, waiting 1, completed 15, failed 2, total 19.
Loading of 'SAPAPPL2' import package: ERROR
Import Monitor jobs: running 0, waiting 1, completed 15, failed 3, total 19.
ERROR 2021-03-23 14:10:43
CJS-30022 Program 'Migration Monitor' exits with error code 103. For details see log file(s) import_monitor.java.log, import_monitor.log.
ERROR 2021-03-23 14:10:43
FCO-00011 The step runMigrationMonitor with step key |NW_Onehost|ind|ind|ind|ind|0|0|NW_Onehost_System|ind|ind|ind|ind|1|0|NW_CreateDBandLoad|ind|ind|ind|ind|10|0|NW_ABAP_Import_Dialog|ind|ind|ind|ind|5|0|NW_ABAP_Import|ind|ind|ind|ind|0|0|runMigrationMonitor was executed with status ERROR .
INFO 2021-03-23 14:10:45
An error occured and the user decided to retry the current step: "|NW_Onehost|ind|ind|ind|ind|0|0|NW_Onehost_System|ind|ind|ind|ind|1|0|NW_CreateDBandLoad|ind|ind|ind|ind|10|0|NW_ABAP_Import_Dialog|ind|ind|ind|ind|5|0|NW_ABAP_Import|ind|ind|ind|ind|0|0|runMigrationMonitor".
INFO 2021-03-23 14:10:46
Switched to user: rasadm.
INFO 2021-03-23 14:10:46
Creating file C:\Program Files\sapinst_instdir\ERP\SYSTEM\ORA\CENTRAL\AS\import_monitor.java.log.
INFO 2021-03-23 14:10:46
Switched to user: rasadm.
INFO 2021-03-23 14:10:46
Working directory changed to C:\Program Files\sapinst_instdir\ERP\SYSTEM\ORA\CENTRAL\AS.
INFO 2021-03-23 14:10:46
Output of C:\j2sdk1.4.2_13\bin\java.exe -classpath migmon.jar -showversion com.sap.inst.migmon.imp.ImportMonitor -dbType ORA -importDirs "D:\SAP IDES 60\SAP_ERP60_IDES_Export\51032413_1\EXP1;D:\SAP IDES 60\SAP_ERP60_IDES_Export\51032413_2\EXP2;D:\SAP IDES 60\SAP_ERP60_IDES_Export\51032413_3\EXP3;D:\SAP IDES 60\SAP_ERP60_IDES_Export\51032413_4\EXP4;D:\SAP IDES 60\SAP_ERP60_IDES_Export\51032413_5\EXP5;D:\SAP IDES 60\SAP_ERP60_IDES_Export\51032413_6\EXP6;D:\SAP IDES 60\SAP_ERP60_IDES_Export\51032413_6\EXP7;D:\SAP IDES 60\SAP_ERP60_IDES_Export\51032413_6\EXP8;D:\SAP IDES 60\SAP_ERP60_IDES_Export\51032413_6\EXP9;D:\SAP IDES 60\SAP_ERP60_IDES_Export\51032413_6\EXP10;D:\SAP IDES 60\SAP_ERP60_IDES_Export\51032413_6\EXP11" -installDir "C:\Program Files\sapinst_instdir\ERP\SYSTEM\ORA\CENTRAL\AS" -orderBy "" -r3loadExe H:\usr\sap\RAS\SYS\exe\uc\NTI386\R3load.exe -tskFiles yes -extFiles yes -dbCodepage 4103 -jobNum 3 -monitorTimeout 30 -loadArgs " -stop_on_error" -trace all -sapinst is written to the logfile import_monitor.java.log.
WARNING 2021-03-23 14:11:16
Execution of the command "C:\j2sdk1.4.2_13\bin\java.exe -classpath migmon.jar -showversion com.sap.inst.migmon.imp.ImportMonitor -dbType ORA -importDirs "D:\SAP IDES 60\SAP_ERP60_IDES_Export\51032413_1\EXP1;D:\SAP IDES 60\SAP_ERP60_IDES_Export\51032413_2\EXP2;D:\SAP IDES 60\SAP_ERP60_IDES_Export\51032413_3\EXP3;D:\SAP IDES 60\SAP_ERP60_IDES_Export\51032413_4\EXP4;D:\SAP IDES 60\SAP_ERP60_IDES_Export\51032413_5\EXP5;D:\SAP IDES 60\SAP_ERP60_IDES_Export\51032413_6\EXP6;D:\SAP IDES 60\SAP_ERP60_IDES_Export\51032413_6\EXP7;D:\SAP IDES 60\SAP_ERP60_IDES_Export\51032413_6\EXP8;D:\SAP IDES 60\SAP_ERP60_IDES_Export\51032413_6\EXP9;D:\SAP IDES 60\SAP_ERP60_IDES_Export\51032413_6\EXP10;D:\SAP IDES 60\SAP_ERP60_IDES_Export\51032413_6\EXP11" -installDir "C:\Program Files\sapinst_instdir\ERP\SYSTEM\ORA\CENTRAL\AS" -orderBy "" -r3loadExe H:\usr\sap\RAS\SYS\exe\uc\NTI386\R3load.exe -tskFiles yes -extFiles yes -dbCodepage 4103 -jobNum 3 -monitorTimeout 30 -loadArgs " -stop_on_error" -trace all -sapinst" finished with return code 103. Output:
java version "1.4.2_13"
Java(TM) 2 Runtime Environment, Standard Edition (build 1.4.2_13-b06)
Java HotSpot(TM) Client VM (build 1.4.2_13-b06, mixed mode)
Import Monitor jobs: running 1, waiting 3, completed 15, failed 0, total 19.
Import Monitor jobs: running 2, waiting 2, completed 15, failed 0, total 19.
Import Monitor jobs: running 3, waiting 1, completed 15, failed 0, total 19.
Loading of 'SAPAPPL0' import package: ERROR
Import Monitor jobs: running 2, waiting 1, completed 15, failed 1, total 19.
Loading of 'SAPAPPL2' import package: ERROR
Import Monitor jobs: running 1, waiting 1, completed 15, failed 2, total 19.
Loading of 'SAPSSEXC' import package: ERROR
Import Monitor jobs: running 0, waiting 1, completed 15, failed 3, total 19.
ERROR 2021-03-23 14:11:16
CJS-30022 Program 'Migration Monitor' exits with error code 103. For details see log file(s) import_monitor.java.log, import_monitor.log.
ERROR 2021-03-23 14:11:16
FCO-00011 The step runMigrationMonitor with step key |NW_Onehost|ind|ind|ind|ind|0|0|NW_Onehost_System|ind|ind|ind|ind|1|0|NW_CreateDBandLoad|ind|ind|ind|ind|10|0|NW_ABAP_Import_Dialog|ind|ind|ind|ind|5|0|NW_ABAP_Import|ind|ind|ind|ind|0|0|runMigrationMonitor was executed with status ERROR . -
How to print Photo Info in the Custom Print Package
I am using LR CC, latest version on a Windows7 PC.
I am trying to print Photo Info in the Custom Print package. I have no trouble selecting Photo Info in the Single Image/Contact Sheet Layout Style, but when I switch to the Custom Print Package, the Photo Info check box in the Page panel, disappears. I can't find any reference to this in the manual as to why this would occur, or not be available.
Appreciate any help with this matter.
Best Regards
SteveHi,
Have a look at: Lightroom Help | Print module layouts and templates
Only on the Single Image and Contact Sheet layouts can you " ... print information about photos, such as the filename, title, caption, and keywords ..." -
Error while running import package
Hi,
Transformation file was validated successfully. But after running import package i am having following error on MS-BPC-7.0.
Invalid character in the given encoding. Line 1, position 1.
When i try validate and process trans file i am having the following error message. But same data file and same trans file was working till couple of days ago. After that whatever changes i have made to file, i did revert them to have it working like beofre.
Warning: Some records were rejected.
Rejected records reference either calculated members or invalid members.
Actually rejected record is only, one, but even other data was not loaded.
Thanks in advance for sharing your ideas or similar experiences.
Thanks,
KKHi,
There is definitely some problem with one of the records there. Do you have header? What is the delimiter? Do you have the same delimiter in the transformation file? You need to take a look at all the possibilities.
Hope this helps. -
Import package from one project into another
Hello everyone,
I have some projects.
An enterprise and war project created in netbeans.
I would like to use some files from one project to another. when I import
the package I get the error-
'package x does not exist'
I have added the package to the project but I still get the error.
I have also added the project to import to my glasspath but still.
E.g.
set classpath
.;c:\enterpriseA;
My next idea is to create a war project into my enterprise project and copy the files
from the war project into it in order to use it. But I'm sure there is a better way.
THanking you in advance.
eve
Edited by: evepokua on Nov 22, 2009 1:44 PMOne mistake I keep making is that I don't add the package to the
Dependencies of the plugin I'm writing. You have to go to plugin.xml,
and add the package you depend on to the Dependencies section. Maybe you
didn't do this?
Michael
nasti wrote:
> Hello everybody!
> I am new user of osgi and eclipse. I tried to do some of Oscar examples
> but I had some problems. Namely, the problem in import of package from
> one project into another in Eclipse.
> I add first project to the Build Path of the second one.
> I add to the first project manifest line: Export-Package example2.service.
> I add to the second project manifest line: Import-Package example2.service.
> But when I tried to execute these bundles the
> java.lang.NoClassDefFoundError was occurred. May be you will help me
> with this problem.
> Thanks....
>
> -
i am new to java and facing problems in importing package which are self made.
secondly does JDK 1.1.3 can support swingHi,
I had some problems myself. I will add few lines, maybe it helps:
OK, let's assume that you work in a directory. In this case, set classpath to this hierarchy as well as to "." ('this' hierarchy - like in DOS).
Now, assume that you want to use packages MyPack1 and MyPack2. The source files of classes belonging to MyPack1 must:
- start with command
package MyPack1;
- be located all in the directory MyPack1
(and the same for MyPack2, of course)
If you want to use MyPack1 within MyPack2, you have to include:
import MyPack1.*;
even though MyPack1 is, in fact, located on path: ../MyPack1/*
(trust the classpath is important here) -
How can Imported Package of components to be fully editable??
hi people,
with JDeveloper TP3
How To Import a Package of components that are editable and display in the
Application Navigator
Fusion Developer’s Guide for Oracle Application Development 11g
Chapter 35.7 Working with Libraries of Reusable Business Components
Says:
Tip: If you require components that are editable and display in the
Application Navigator. Add additional business components from a
directory that is not currently part of your project's source path, then
open the Project Content page of the Project Properties dialog and
add the parent directory for these other components as one of the
directories in the Java Content list. In contrast to imported packages
of components, additional components added to your project's source
path will be fully editable and will appear in the Application
Navigator.
but i can't even change Control hints.
with JDeveloper TP3
How To Import a Package of components that are editable and display in the
Application Navigator
Fusion Developer’s Guide for Oracle Application Development 11g
Chapter 35.7 Working with Libraries of Reusable Business Components
say:
To create the JAR files, in the Application Navigator right-click the Business
Components project folder and choose Deploy and the ReusableComponents
profile. A Deployment tab appears in the JDeveloper Log window that should display
feedback like:
---- Deployment started. ---- Apr 28, 2007 7:04:02 PM
Running dependency analysis...
Wrote JAR file to ...\ReuseableComponents\deploy\ReuseableComponentsCSMT.jar
Running dependency analysis...
Wrote JAR file to ...\ReuseableComponents\deploy\ReuseableComponentsCSCommon.jar
Elapsed time for deployment: less than one second
---- Deployment finished. ---- Apr 28, 2007 7:04:02 PM
then If you require components that are editable and display in the
Application Navigator Add additional business components from a
directory that is not currently part of your project's source path, then
open the Project Content page of the Project Properties dialog and
add the parent directory for these other components as one of the
directories in the Java Content list
where i didn't find Project Content page of the Project Properties
but i got
Compiling...
Context: selection=rootBusiness.jpr project=rootBusiness.jpr node=rootBusiness.jpr
Validating Business Component: rootbusiness.rootBusiness
copying rootbusiness/rootBusiness.jpx to output directory
Validating Business Component: rootbusiness.entity.Dept
copying rootbusiness/entity/Dept.xml to output directory
Validating Business Component: rootbusiness.entity.Emp
copying rootbusiness/entity/Emp.xml to output directory
Validating Business Component: rootbusiness.entity.FkDeptnoAssoc
copying rootbusiness/entity/FkDeptnoAssoc.xml to output directory
Validating Business Component: rootbusiness.Service.rootAppModule
copying rootbusiness/Service/rootAppModule.xml to output directory
Validating Business Component: rootbusiness.view.DeptView
copying rootbusiness/view/DeptView.xml to output directory
Validating Business Component: rootbusiness.view.EmpView
copying rootbusiness/view/EmpView.xml to output directory
Validating Business Component: rootbusiness.view.FkDeptnoLink
copying rootbusiness/view/FkDeptnoLink.xml to output directory
copying rootbusiness/Service/common/bc4j.xcfg to output directory
Updated file:/C:/JDeveloper/mywork/Root/rootBusiness/classes/META-INF/adfm.xml
[10:16:25 ص] Successful compilation: 0 errors, 0 warnings
and didn't find ReuseableComponentsCSMT.jar or ReuseableComponentsCSCommon.jar
thanks
Message was edited by:
greenApplewith JDeveloper TP3
How To Import a Package of components that are editable and display in the
Application Navigator
Fusion Developer’s Guide for Oracle Application Development 11g
Chapter 35.7 Working with Libraries of Reusable Business Components
Says:
Tip: If you require components that are editable and display in the
Application Navigator. Add additional business components from a
directory that is not currently part of your project's source path, then
open the Project Content page of the Project Properties dialog and
add the parent directory for these other components as one of the
directories in the Java Content list. In contrast to imported packages
of components, additional components added to your project's source
path will be fully editable and will appear in the Application
Navigator.
but i can't even change Control hints. -
Hello All,
I am getting a strange behavior using Import Package to load data into BPC. I load data into BPC in both LC and USD. When I load the data first time, it accepts transactions in both LC and USD. But when I load after the initial load, it errors out in CONVERT data with CURRENCY 'USD' and rejects transactions with USD Curriencies. USD is a valid currency and I have processed the currency dimension multiple times. Has anyone experienced this issue? I have processed the transformation file and also the conversion files and no issues with them.
Thanks for your inputs!!Hi,
I think that your FxTrans.lgl is included in your Default.lgl, and it is trying to convert your values at the same time that you are loading them. Do you require the FxTrans to always run? If not you can just comment it out and then you should not have an issue any more.
Cheers,
Andries
Maybe you are looking for
-
Question about returning an Apple product to the store...
Hi everyone, I'm not sure if this is the right place to ask this question, but here it goes: Last Friday, I bought an TV in a Premium/Authorized reseller store. However, I didn't notice that I'd need a television with an HDMI, DVI, or component vide
-
Critical error in VDI. host is unresponsive
Dear all, i am facing problem here. i am clicking on Desktop provider in the left panel. on the right hand side, there is critical error saying: "Critical. The Desktop provider cannot serve any desktop. check hosts and storages" also in the top it is
-
AMD Radeon 7700 Resolution Issues
Okay, this seems like a totally idiotic problem, but I can use some help. I recently installed MSI's AMD Radeon 7700 video card in my Windows 8 64 bit system. The computer itself is plugged into my 16 x 9 Samsung TV through an HDMI cable. Everything
-
Tool to test Webservices using SwA (Soap with Attachements)
Hi All, I generally use the took xmlspy to test any webservice. But now i am working with a webservice that is using SOAP with Attachemtns. it seems we cannot use xmlspy to test/invoke webservices that use soap with attachements. is there any tool by
-
What will happen if we dont give occurs clause while creating an inttable?
hi experts can u help me pzzzzzzzzzzzzz