Audition 1.5 or 2.0 with Presonus FireStudio Project

I'm trying to connect a new FireStudio to my HP PC (WinXP Home +1G ram)
I cannot see any of the audio channels except for channel 1.
Any suggestions to make this work?

took me a while to find this, simple solution.
Launch Adobe Audition 2.0
Go to Edit > Audio Hardware Setup... > Edit View (tab)
Set the "Audio Driver" to 'ASIO Presonus'
Repeat step 2 for the "Multitrack View" and "Surround Encoder" tabs
Click the "OK" button
hope this helps, because i just baught one....and ill be pissed if it doesnt.

Similar Messages

Problems with Presonus Firestudio and Logic

I am having problems with compatability with my brand new Presonus Firestudio recording interface and Logic pro 8. I am new to logic but not to home recording, and i cant understand what might be the problem. When i use the firestudio with garageband it works easily. In the garageband sound preferences there are input AND output channels that the user can define. (i.e. you can set your input channels to come from the firestudio while the output channels go to the computer speakers or headphone jacks or whatever you define it as).
From what i have seen in logic, there is only one option for your audio settings. when in preferences and under audio, there is a "device" setting in which you can define your audio device. Wheather this is input AND output for the program, i do not know. but the problem i am experiencing is that whenever i choose the firepod as the input device, no sound from logic will play from the speakers whatsoever. My first thought was that maybe ouput was going straight to the firestudio, but after plugging headphones into it this also did not work. Has anyone had success getting their firestudio to work in logic? if so let me know what settings you had to use, and how you got to moniter your input from from the firestudio via your computer.
p.s.
another WIERD problem i have run into, is that if i shut off the firestudio while logic is open, alot of times it will shut down my whole computer. i have never heard of this happening. what am i doing wrong?
thanks!

SydSeale wrote:
The new beta drivers are now here...
http://www.presonus.com/forums/showthread.php?t=3957
ah, I was hoping to find my solution here, but alas the thread is gone...
I recently bought a Macbook running Leopard, and am having difficulties with my PreSonus Firestudio Project thru Logic and Mainstage. I can get audio input and output just fine, but there's a ton of distortion/crackle. Kickstarting the sample rate seems to clear it up for a minute or two, but then the crackle comes back. The recorded tracks sound clean if I unplug the Firestudio, so apparently it's only in the monitoring stage?
On the PreSonus board, they're claiming it's Apple who needs to update drivers for Leopard; PreSonus says the "Firestudio Project is Leopard compatible."
still searching for some answers...

MOTU Ultralite Mk 3 vs. Presonus Firestudio Project instead of M-Audio

After buying an M-Audio FastTrack Ultra 8R, with a hardware problem, and the bad drivers that Logic Forum members warned me about, I'm having to return the unit. Loads of people are having problems with the drivers...
So, I've managed to narrow down the selection to: MOTU Ultralite Mk 3 and the Presonus Firestudio. Both seem to be well made, have great drivers and be mac friendly. I'm currently using an old 17" Powerbook G4, but will upgrade to a MacBook Pro, and want to make sure that the firewire chips on the new MacBook Pro won't create problems with the units.
Any experience with these, and feedback would be appreciated.
Cheers!

IMHO, you'll just be spending more money for the motu. I own a Firestudio Project. I think it's great. Straight forward and easy to use. Rivals FW interfaces costing 2 and 3 times as much. Many people look at the price and think because it's less expensive it must not be good. As far as the ins and outs, I believe the outs on the Kontrol unit are balanced. You could go direct in with no probs...unless you're planning on using GR3 as plug. Not sure if you can use the motu AND the Kontrol usb in at the same time. That'd be for someone more qualified to answer. Good luck with your setup.
jc

Please Help! Problem with 'whistle' when using Audition and Premeire Pro 1.5 with Audigy

I hope someone can help with this problem. The start of these messages is at the bottom. Any suggestions would be most welcome...Bill Allen
Hi David (00)... Thanks for your reply. I just wanted to let you know
that I am going to post all of this correspondence on as many Creative
forums that I can find in hopes of finding someone that help with this
problem.
I will advise you of the results
Thanks again...Bill Allen
----- Original Message -----
From: "Creative Americas Customer Support"
To: "Bill Allen"
Sent: Saturday, February , 2006 :39 AM
Subject: Re: Creative System Information (English : Adobe Premeire Pro .5
and Adobe Audition) (KMM987992I6636L0KM)
> Sir,
>
> The only time that I've see a random tone being generated as you
> decribe, it was necessary to update the system bios to correct.
>
> While we are able to playback and record with the card and it's included
> software, Adobe continues to not allow you to monitor what you're
> recording. As best we can tell, there's nothing wrong with the card and
> I would urge you to check with Adobe for any "monitor recording"
> switches that may be in their software.
>
> For faster service please reply with previous correspondence when
> replying to this email.
>
> Best Regards
> ,
>
> David (00)
> Team Specialist
>
> Technical Support
> Creative Labs Americas
>
>
>
> To provide feedback on your "Creative Experience" please click on the
> following link:
>
Link removed
>
> This link is provided so that you may provide feedback on your "Creative
> Experience". If you require further troubleshooting or have additional
> questions simply reply to the original mail and we will be glad to
> assist you.
>
> Original Message Follows:
> ------------------------
> Jeen... I appreciate, very much, your reply. But I don't appreciate
> trying
> to be 'ping ponged' back and forth between Creative and Adobe. While I
> realize that you can only deduce a solution from what I tell you, I
> believe
> that if you re-read my description of the problem you will realize that
> the
> problem is with the sound card and it's associated software. Otherwise
> why
> would the system work as expected when it it turned on the next morning?
>
> I would also like to know where the 'tone' comes from. When recording
> video segment (with audio) through the firewire connection of the
> Creative Audidgy 2ZS card, after a short while the audio is replaced with a
> constant tone (as I said, it is about 200 Hz). If I record the video thru the
> Firewire connection and the audio through the 'Line-In' connection,
> there is no problem with the recording the audio track 'tone free'. However,
> sometimes but not always, when the audio is played back the tone will
> appear. This has happened with both Adobe Premeire Pro .5 and Adobe
> Audition. It is not in the audio track of Adobe Premeire Pro .5 or
> Adobe Audition, so the problem must lie with the Creative Audigy 2ZS card or
> it's associated software. I'm sure your audio engineers have knowledge of
> this problem and I would appreciate an answer.
>
> Thanks...Bill Allen
>
> ----- Original Message -----
> From: "Creative Americas Customer Support"
>
> To: "Bill Allen"
> Sent: Friday, February 0, 2006 2:5 AM
> Subject: Re: Creative System Information (English : Adobe Premeire Pro
> .5
> and Adobe Audition) (KMM9780I6636L0KM)
>
>
>> Dear Bill,
>>
>> Thank you for replying back to Creative Technical Support.
>>
>> With regards to your issue, I understand that you are having
> difficulty
>> getting the audio to record from the applications Adobe Premiere Pro
> .5
>> and therefore not sound during the playback.
>>
>> As you have verified that the sound card is working properly with the
>> other applications on recording or playback, this could be due to the
>> improper setup for the audio in the Premiere Pro .5.
>>
>> You may like to refer to Adobe for assistance on the configuration of
>> the audio settings as we are not in a better position to advise you on
>> third party software.
>>
>> Should you have not sound or issues with our software, please feel
> free
>> to contact us so that we can assist you.
>>
>> For faster service please reply with previous correspondence when
>> replying to this email.
>>
>> Best Regards
>> ,
>>
>> Jeen
>> Technical Support
>> Creative Labs Americas
>>
>>
>>
>> To provide feedback on your "Creative Experience" please click on the
>> following link:
>>
Link removed
>>
>> This link is provided so that you may provide feedback on your
> "Creative
>> Experience". If you require further troubleshooting or have additional
>> questions simply reply to the original mail and we will be glad to
>> assist you.
>>
>> Original Message Follows:
>> ------------------------
>> Ronshone... Thanks for your reply.
>>
>> Here is the information you requested:
>>
>> Sound Blaster Audigy 2ZS
>> PID: 0 03 50 00 00 00 02
>> Driver Ver: 2.8.4
>> Firmware : 0.0.0
>> Model: SB.0350
>> Serial Number: MSB0350472004288E
>> Ink stamp: 50SPT470D
>>
>> The Audigy 2ZS is the only sound card installed
>> The Audigy 2ZS card is at least one slot away from the graphics card.
>> The Audigy 2ZS card is one slot away from another card.
>> The Audigy 2ZS card is properly seated in the PCI slot.
>> The PC's internal wires have been moved away from the Audigy 2ZS card
> .
>> The 'on-board' sound is disabled thru the BIOS.
>> The 'on-board' game port is disabled thru the BIOS.
>> The XP Pro operating system is up to date with all updates.
>> There were no background operation going at the time of the tests.
>> The anit-virus program was closed
>> The CPU is not overclocked.
>> And, I am the Administrator.
>>
>> The card came in a Creative retail Box along with the input unit that
>> mounts
>> in the dri've bay. I can't recall what that is called.
>>
>> I have relocated the sound card to a slot that is 4 slots away from
> the
>> graphics card and slot away from another card, in this case an
>> additional
>> IDE dri've controller.
>>
>> I have performed the test you outlined. I found that I had to record
>> using
>> the 'line in' source input. And I had to playback using the 'wave'
>> source.
>> As far as that test is concerned, everything worked. However when I
>> bring
>> up Adobe Premeire Pro .5 I do not hear the audio when capturing, and,
>> even
>> though the audio meters in Premeire Pro in indicate that there is
> audio
>> playing from the audio track on playback, I hear nothing from the
>> speakers.
>>
>> I then brought up the Creative Speaker Settings requester and did a
>> diagnostic test. All tests indicated "pass". But when I click on the
>> 'Speaker Settings' and perform the 'Speaker Test' I hear nothing. I
>> should
>> add that in both mixers, the Creative Surround Mixer and the Play
>> Control
>> mixer, all inputs and outputs are selected (not muted). Also when I
>> performed this same test yesterday the 'Speaker Test' worked fine.
>>
>> On rebooting, the 'Windows XP' sound is heard from the speakers.
>> Bringing
>> up Adobe Premeire Pro .5, the audio played as expected. The 'Speaker
>> Test'
>> in the Creative Surround Mixer also worked as expected.
>>
>> I then recorded the rest of my program using the Adobe Premeire Pro
> .5
>> 'Capture' requester and when I tried to playback from within Adobe
>> Premeire
>> Pro .5 all I got was a constant tone (about 200 Hz), even though the
>> audio
>> meters in Adobe Premeire Pro .5 indicated that the audio was good and
>> had
>> no constant tone.
>>
>> I rebooted the computer and brought up Adobe Premeire Pro .5 and my
>> program. Without making any changes to either mixers, Adobe Premeire
> Pro
>> .5
>> performed, and the sound played, as expected. In the 'Play Control'
>> mixer
>> only the 'wave' was acti've. All the rest were muted. It was the same
>> for
>> the 'Creative Surround Mixer'.
>>
>> I am at a loss as to what the problem is. Any help would be
>> appreciated.
>>
>> ...Bill Allen
>> ----- Original Message -----
>> From: "Creative Americas Customer Support"
>> @customercare.creative.com
>> To: "Bill Allen"
>> Sent: Monday, February 06, 2006 9:42 PM
>> Subject: Re: Creative System Information (English : Adobe Premeire Pro
>> .5
>> and Adobe Audition) (KMM933384I6636L0KM)
>>
>>
>> Dear Bill,
>>
>> Thank you for contacting Creative Technical Support.
>>
>> With regards to the issue you are having, I would really appreciate it
>> if you can provide me with the model number of the sound card. It
>> should
>> start with CT or SB followed by 4 numbers found on the sound card. I
>> also need the serial number which can be found on the sticker and the
>> ink stamp which is printed on the back of the card. This number will
>> not
>> be located on any of the stickers and it will not be labeled. It is a
>> number that has been stamped on the card itself, possibly near the
>> outer
>> edge of the card to determine the best advice for you.
>>
>> Did the sound card come pre-installed in the PC, comes in a plastic
>> cover or brown box or did it come in a Creative retail box package?
>>
>> Below is a link that may help with the location of the model number.
>>
>> Run a keyword search for SID2456 from the link below.
>>
Link removed
>>
>> I also need you to try the following recording test.
>>
>> SELECT THE RECORDING SOURCE IN SURROUND MIXER
>> . Go to Start Programs Creative SB Audigy Surround Mixer
>> 2. Click on the Recording Source (should be on the right side of the
>> mixer under the REC label)
>> 3. Change the recording source to Analog Mix
>> 4. Mute the other analog sources (Mic, CD Audio, Auxiliary, Tad, PC
>> speaker) that you don't want recorded with the audio stream.
>> 5. You may wish to select "record without monitoring" by click on the
>> (+) above the Analog Mix recording source. This keeps the source from
>> playing out to speakers while recording
>>
>> TEST RECORD THE AUDIO
>> . Go to Start Programs Accessories Multimedia Sound Recorder.
>> 2. Click the Record button (red dot)
>> 3. Talk into the microphone
>> 4. Let it record the source for a little bit
>> 5. Hit the Stop button (black square)
>> 6. Hit the play button (single arrow pointing right)
>> 7. You should now hear the audio that you recorded.
>>
>> If you are still having issues, I recommend you to ensure the
> following
>> for the audio installation and test:
>>
>> - The card is the only card installed other than the Graphics card.
>> - The card is at least one empty slot away from the Graphics card.
>> - Place the soundcard away from all the others.
>> - That the card is seated properly in the PCI slot.
>> - Move the PC's internal wires away from the soundcard.
>> - That the on-board sound on your motherboard is disabled through the
>> BIOS.
>> - That the on-board gameport is disabled through the BIOS.
>> - That your motherboard BIOS is up-to-date.
>> - That the operating system is up-to-date with the latest service
> packs
>> and patches.
>> - That there are no background applications open when you attempt the
>> solution.
>> - That the anti-virus program is disabled.
>> - That if you are over-clocking your system, return all options to
>> their
>> recommended settings.
>> - That you access the PC with administrator rights.
>>
>> Do reply back to me if you are still having problems with any error
>> messages prompted. Thanks.
>>
>> For faster service please reply with previous correspondence when
>> replying to this email.
>>
>> Best Regards
>> ,
>>
>> Ronshone
>> Technical Support
>> Creative Labs Americas
>>
>>
>>
>> To provide feedback on your "Creative Experience" please click on the
>> following link:
>>
Link removed
>>
>> This link is provided so that you may provide feedback on your
>> "Creative
>> Experience". If you require further troubleshooting or have additional
>> questions simply reply to the original mail and we will be glad to
>> assist you.
>>
>> Original Message Follows:
>> ------------------------
>> User Detail
>> ----------------------------------------
>> Name : Bill Allen
>> Email Address : [email protected]
>> Self Description : Intermediate PC User
>>
>> Creative Product Information
>> ----------------------------------------
>>
>> Problem Type : I need help with a third-party software application
>>
>> Problem lies with:
>> ----------------------------------------
>> Adobe Premeire Pro .5 and Adobe Audition
>>
>> Customer's System Specification
>> ----------------------------------------
>>
>>
>> Detailed Problem Description
>> ----------------------------------------
>> I can hear sound from my computers speakers. The diagnostic tests
>> performed by the Creative software are all "OK", but I cannot record
>> audio with either of the two programs mentioned above. I have checked
>> everything I can think of and all of the settings appear to be "OK".
> I
>> have also updated the driver for the sound card. What can I do?
>>
>> Attachment :
>> [ Attachment Type: application/octet-stream Name: CTSi.cab]

TeamRacing6 wrote:
b noir,
I can get itunes to start if I disable Bonjour or if I "repair" it first. Sometimes I can repair Bonjour though add/remove programs, sometimes it will only "repair" using WinRar. Sometimes I have to "repair" Bonjour 2 or 3 times to get iTunes to start.
I have tried uninstalling and reinstalling at least a dozen times. I have tried redownloading iTunes at least 5 times and from different links. This leads me to believe that the dnssd.dll file is not itself corrupt, but this newest version is causing a conflict with XP somewhere somehow.
Team, iTunes 10.2.2.12 has just been released. I installed it and checked, and BonJour's been updated to version 2.0.5.0, and there's a new 2.0.5.0 version of dnssd.dll on my system. So I reckon it's worth a try updating to that to see if it's of any help with your trouble.

I need tow connect a Presonus firestudio mobile with my Mac Book Pro???

I need tow connect a Presonus firestudio mobile with my Mac Book Pro??? I don't know which cable to buy?
I bought http://www.monoprice.com/Product?ab3=b&utm_expid=58369800-11.KFcpHWqASSutMqNPOqa JVg.1&c_id=103&cp_id=10301&cs_id=1030105&p_id=3542&seq=1&format=2&utm_referrer=h ttp%3A%2F%2Fwww.monoprice.com%2FProduct%3Fab3%3Db%26c_id%3D103%26cp_id%3D10301%2 6cs_id%3D1030105%26p_id%3D3542%26seq%3D1%26format%3D2
but I cannot connect on the macbook pro??? please help, regrds, Real

With the Lion it is essentially unnecessary to resort to external driver disks. What's more, most of those disks are incompatible with the OS and should not be used. The system already carries a wide variety of printer description files (aka PPDs, which is what modern printing systems use as "drivers") for a lot of brands. And there was an HP printer update just two days ago.
Just checked in mine and did indeed find that the HP OfficeJet 6200 Series, with or without Fax, is covered with the latest update.
So just go thru the motions of creating a proper printer instance:
Make sure the Mac "sees" the printer on the network.
System Preferences / Print & Scan
Click on the + button on the left column
Select the appropriate type of printer, will use IP for the rest of this
Select HP Jetdirect - Socket, default for HP network printers
Type the IP address or look it up
Name the printer for easy identification on the print dialog
Let the Mac identify the printer model or manually choose the driver
Click Add.
Once the instance pops up in the list, can click on Options & Supplies for further config.

Has anyone had a problem using Mainstage 2 and Logic 9 with PreSonus fire studio Mobile?

I Still can't get Mainstage and Logic to play well with my setup. I'm using a Mac Pro 2 GHz Intel Core i7 with 4 GB ram and Logic 9.1.6 and Mainstage2. I have a PreSonus Firestudio Mobile and M-Audio Midisport midi interfaces. The only Midisport that works consistently is a MisiSport 2X2 sith a thru/merge switch set to merge. I am playing all of this with a Roland A-90 keyboard. Logic sometimes starts, but the audio interface doesn't work. Mainstage crashes on start-up. Can anyone help?
Thanks,
Bob

Hi
There have been several reported issues on this forum about problems a) with Roland controllers (Sending MIDI Clock and 'All Notes Off' ???), and b) MIDSport interfaces
https://discussions.apple.com/message/17138809#17138809
https://discussions.apple.com/message/17011191#17011191
I suggest that you try a 'scientific' process of elimination:
Disconnect all external hardware, and try MS
Connect the hardware singly, one at a time, to determine which is causing the problem
CCT

Any idea on when Audition CS5.5 will be compatible with Mac OSX Lion

Hi
Any idea on when Audition CS5.5 will be compatible with Lion ?
Will they let us know through this forum or on the main product page ?
Thanks

I've seen this before on a Theatre Sound Mailing List I subscribe to.
Every time Apple issue an updated operating system there's a flurry of questions about all sorts of sound recording, editing and playback software that no longer works. This moves to a flurry of "this update now works but that one doesn't" posts then, eventually everything settles down just in time for Apple to issue a new upgrade.
I don't understand why they do things this way but it's one of the reasons I stick to Windows and never wish to move to Apple products. Their disregard for their customers (or are they acolytes?) is astounding.

Trying to record multiple tracks (24) in Garageband with 3 presonus firestudio devices daisy-chained together.

Please help !! I can record multiple tracks (8) on a single presonus firestudio, but now I'm trying to expand the number of tracks to 24 by daisy-chaining three firestudio devices.
The three units will sync up properly, and Garageband detects all of the input channels, but the recording doesn't pick up the input signals for the 2nd or 3rd device. It only picks up the signals from the first device. I read the manual and daisy-chained the devices by serial number (lowest to highest).
Any help would be greatly appreciated.
Thanks

avotrans wrote:
I'm trying to expand the number of tracks to 24 by daisy-chaining three firestudio devices.
you'll need to create an aggregate device:
http://www.bulletsandbones.com/GB/GBFAQ.html#multipleaudiointerfaces
This FAQ entry offers a Minute GarageBand video tutorial
(Let the page FULLY load. The link to your answer is at the top of your screen)

Is there a way of working collaboratively on a flex project with a small project group?

Is there a way of working collaboratively on a flex project with a small project group?
I am part of a small group of developers who wish to work on a single flex project together. Is there a way to set up flex so that the project can be developed by multiple people at the same time. I have seen one thread out on the internet about working locally and then uploading to SVn but this is not an option in this case.
Any ideas.
Many thanks in advance
Dave

I would say that rushing into development without a source-control system will cost you more in the long-run. If your organisation is serious about developing software it then it needs to invest in the necesary infrastructure, so you should get that process kicked-off as soon as possible.
In the interim you could set-up a source control server on one developer's machine or commandeer a spare machine to use as a temporary source control server. Just make sure you have it backed-up regularly. Or you could use one of the online source control services; many will support private repositories for a small fee.

Project Server 2010 - Error 20010 with a master project and 3 sub-projects during publication

Hi,
Here is the situation :
One master project with three sub projects.
Sub projects are really similar (Same ressources and nearly same tasks but only the first contain real work for now).
Sub projects got no sub projects nor links between projects.
The owner of the master project got read rights through projects permissions on sub projects.
Sub projects are link in "read only".
We applied Project Server 2010 SP2 last week end and the issue appeared monday.
Here are the symptoms :
When we link only one sub project (Doesn't matter which one), the owner can publish, no problems.
With 2 sub projects, the error may occur.
With 3 sub projects, the error always occurs.
With admin rights, the error doesn't occur.
Here is the error :
ID : 20010 (0x4E2A)
Description : You don't have required permissions to perform the action (Average traduction)
Detail : <detail><errinfo><general><class name="Project"><error id="20010" name="GeneralSecurityAccessDenied" uid="19515c1d-2624-466f-953a-b7fc67337b81"/></class></general></errinfo></detail>
I'm unable to determine which sub project is the culprit, if there is one, as it's working when I link only one of them.
Thanks for your time !

Fylim --
If the project manager in question does not need to edit any of the three projects, the PM does not need to have Read/Write access to any of the three projects. Because you said that the PM needs to set links in all three projects, this means that
the PM will be editing all three projects. In order to edit the three projects, the PM must have Read/Write access to all three. Setting cross-project links constitutes editing of the projects, which is why the PM must have Read/Write permission.
Make sense?
Regarding SP2, I am not aware that this would change anything, but I could be wrong. The reality is that regardless of which SP you have applied to Microsoft Project and Project Server 2010, the PM in this situation MUST have Read/Write access to the
projects that he/she needs to edit with cross-project links. Hope this helps.
Dale A. Howard [MVP]

How can I link 1 movie file with several logic projects?

Hi all,
I've been working on the music for a film with a colleague of mine and are sharing logic files via dropbox. 72 cues had to be altered for logisitical reason to work in someone else's studio for the final mix. Since I had a copy of the movie on my machine and my colleague had a copy on his we thought that if we put our movie into the root directory of our logic project's folder then the movie would automatically load up with the projects after we shared them via dropbox. We checked to make sure that both movies had the same filename. Unfortunately this did not work and we had to then reassociate 72 cues individually with each logic project. With such limited time to prepare the cues for the final mix this really took too much time.
Is there any way in logic (9.1.8) to associate 1 movie file with a number of logic projects quickly, without having to open up the project and select open movie?
kind regards
/mischa

Seems to me that if you both had the movie file in the same location on both of your drives (eg on Macintosh HD at root level, in no other folder) then all the project files would search for this common path and find the file.
The problem arises when there is even a small difference between path names.
Unfortunately, this won't help you at this point as all the project files already are associated with unique file paths for the movie. By now, you've probably already done it one by one - but maybe for next time....?
There's no bulk or quick way to do this.

RH6 Extremely Poor Peformance with Lage Webhelp Project

We recently upgraded to RH6, which has caused performance
problems so severe that we literally cannot work with the project.
Our problems are exclusively with our largest project -- 600+ html
files, 500,000+ words, 35mb (only about 150 small gif images).
We're not having any problems with our smaller help projects.
When we launch the large project, the CPU usage immediately
hits 100% and stays there for the duration of the session. My
longest session is currently 35 minutes, during which I was able to
delete a folder, add another folder, and add 5 files to the system.
The application took almost 8 minutes to close.
Because of the size of this project, it's always had
performance issues on startup. Under X5, it took about five minutes
before you could work freely, but then worked fine.
So far, three of us have experience the same peformance
problems. We're all using identical Thinkpad t43 laptops with 2
gigs of memory and running XP Pro Service pack 2 with all of the
security updates. Someone recommended temporarily disabling
VirusScan, which didn't improve the situation at all.
So, two questions:
1. Have any of you experienced and been able to resolve
serious performance issues of this sort?
2. What operations does RoboHelp peform when you open a
project. It seems to verify folders (& links?), but I can't
find any information about exactly what it does.
EDIT: We are not accessing the project over a network, so
this cannot be the cause of our performance problems.
Thanks for any help you can provide.
Roger Gerbig
Senior Technical Writer
Aprimo, Incorporated

Hi Roger and welcome to the RH community. To be honest your
project doesn't sound that large at all. At my last job we had
projects 4-5 times the size of that running with no performance
issues at all. That said, check out
this
link for some pointers about where you can go from here.

Event Library will not show External HD with the current project.

Problem opening the project I'm working on...I start FCPX and the Event Library quickly shows the external hd with the current project I want but only for a slit second, then it fires up a error message(the I can't possibly read) and acts as if the hd doesn't exist. I can see the hd on the desktop(share is on) and the drive is partitioned, with one of the parts as a Time Machine BU(but I have turned TM off).
Tried:
permissions
restarting
moving file to main drive
moving file to another drive that isn't a TM drive
Thanks in advance for any advice

It's been documented that Time Machine drives cannot be used with FCPX (they disappear just like you are talking about). However, I would genuinely be surprised if you couldn't partition a drive so that one partition is devoted to TM and the other to FCPX, as the two partitions should be seen as two separate drives.
That said, when FCPX sees the TM drive partition, it might do something that dismounts the other partition from its view as well. For example, it might look at a drive-level identifier and decide that anything with that identification is not suitable for FCPX.
Give this a try -- eject the TM drive partition in the Finder prior to opening FCPX. So you should only have in the Finder the partition you are using with FCPX. To be safe, reboot before trying all of this.
EDIT - then open FCPX and see if you can see the drive and it stays visible.

Burn Problem with a 4GB project: "Layer 0 Exceeds"

First off this is not the usual Dual-Layer problem. I know all about Layers how they work and how to make them. Although the error I receive deals with DL my projects or nowhere near that size.
I recently had DVDSP 4 crash on me. Ever since than its been running really funny. The biggest issue I am having is that it won't allow me to burn a DVD 5. My projects usually range from 2.5GB - 4.5GB. Let me also say that DVDSP 4's Disc meter has always been a pretty good gauge as far as I am concerned. It's always been right on telling me if something was going to fit on a DVD 5 or 9.
My problem ever since the crash is that DVDSP will not allow me to burn a DVD unless the project is under 3.5GB. I have tried everything, including a Full Re-install of DVDSP. Every time I try to burn a DVD I get the following error message:
+"Formatting was not successful. Layer 0 exceeds the maximum layer size allowed. Please choose a suitable marker location that will support this condition."+
My latest project is dealing with a 4.4Gb (according to Meter) 4.32GB actually. It is impossible for me to burn a DVD because of the error message above. I can however run the project out on a Single DLT. How does that work?
Has anyone else had a problem like this? Does anyone have an suggestions?
I have checked all the obvious settings in DVDSP and all seem to be right. I can't figure this one out.

I've never had a problem burning a 4.4 disc on a DVD 5 until now. I actually went back to some of my previous project that were a DVD-5 and I am unable to burn those now too. Everything really got screwed up on that last Crash.
Yes. I am using AC3 audio.
I have not yet tried burning my DVD project through another program...but thats a good idea.
I usually burn a DVD and DLT for the replicators...but I know they prefer a DLT. What I find odd about all of this is that I am able to run out a DLT with no errors at all. It only seems to be on the DVD side.
In regards to the uninstall...I used the exact program. I am actually in the process of doing a full reinstall of FCP2 Suite.
I'll let you know how it goes. Thanks for the suggestions.
Mike A.

[svn:osmf:] 10751: Fix a bug with the ReferenceSample project.

Revision: 10751
Author:   [email protected]
Date:     2009-09-30 10:57:34 -0700 (Wed, 30 Sep 2009)
Log Message:
Fix a bug with the ReferenceSample project.
Modified Paths:
    osmf/trunk/apps/samples/framework/ReferenceSample/org/openvideoplayer/model/ReferenceSWFE lement.as
    osmf/trunk/apps/samples/framework/ReferenceSample/org/openvideoplayer/view/MainWindow.as

(Removed)

Audition 1.5 or 2.0 with Presonus FireStudio Project

Similar Messages

Maybe you are looking for