Audition 1.5 with Win7 64 bit

Hey all.
Complete novice here. Been using Audition for a couple of years to record and mix music. Fantastic program!
I recently upgraded from XP SP3 to Win7 64 Pro. Audition loads (with the Unknown Publisher error (no biggy)), but when I go to record, I just get spikes. I've reduced my line in to about 20. No difference. When using Monitor Level, everything looks normal. The levels are following along well. Hit record and it's just spikes. Playback is spikes too. It's as if only the Peaks are recording.
I have no idea what to do. I suppose I could upgrade to Audition 3, but I'm not sure that is the solution. I'm using Onboard sound (Realtek ALC892).
Thoughts, suggestions?
THANKS!

Almost certainly a Realtek driver error - try checking for a revised one.

Similar Messages

Is DAMO has issues with win7 64 bit

Hello,
we are impelmenting DAMO for our users, it works fine with Win XP/7 32 bit, but got some issue with win7 64 bit, its not creating MAPI profile, at the end of installation it shows
error, "Failed to create a new MAPI profile. ", After that it displays "Setup encountered an error
and failed to create a new MAPI profile. You will need to reinstall IBM Lotus Domino Access for Microsoft Outlook."
please pass solution if you have any...
Thanks!
vipul

Do you have a virus scanner, can you exclude .nsf files from scanning.
When installing the damo client software do not put in the normal Program files area as I believe windows 7 will not allow permissions to be changed without asking every time, so tis could be causing issues with temp files etc at setup.
When setting up user profile it will ask where to save the user files, change from default profile area to some other created area of the disk you know you have access to, suggest making a path c:\damo\username\
Also install lotus notes normal client and make sure your ID is ok using basic client.
Thanks.
Tony Chen
TechNet Community Support

Memory Leak Issue With Win7 64 bit and Youtube.

I have a Win7 64 bit using IE9 with version 11.4.402.265 installed. 4 MB installed.
Whenever I go to Youtube or Liveleak, and watch videos, over time it uses up to 4gigs of my memory! Even if I close the window, it does not free up the memory until I Ctrl/Alt/Delete and shut down the window(s).
I normally only keep open 1-2 windows. Google toolbar is about the only thing installed. I can open 5 and more tabs, but as long as the site does not use flash, I don't have issues and each window usually uses under 200k memory watching them in task manager.
When I go to open and watch a youtube video, it slowly climbs to 200k and within an hour, I can be at 2 gigs or more memory and up to 4 gigs within 2 hours (or sometimes much sooner). Closing the window does not release the memory until I end task on it and then after a minute or so, the memory seems to clear and everything is back to normal.
I searched the forums and seems lots of users, report memory leaks, some using yahoo toolbar installed, which is not my case. I do use yahoo as my e-mail address, no idea if that is related or not. I had the same issue when I had the prior Flash version installed, this has been going on for months. Right now having only this window open, using 129, 192 memory. If I open one more window (using the 64 or 32 bit browser) and start youtube, the memory in that window keeps climbing about 50-100kb a second, so it adds up quickly. I have kaspersky running in the background and that is about it other then my nvida driver setup.
Really frustrating that so many people here and across the internet have reported this. I did have IE8 a few weeks ago and still had the same issue, upgraded to IE9 to see if that helped.
Interesting side note, if I pause a video, it slows way down on the memory leak, but still rises at a slower pace. I don't know if this is an IE thing or Flash. I have had this setup since 2009 and don't recall having issues with IE7. I use Youtube so much as a teaching instrument as a music teacher, so constantly have lessons going on it.
Thanks and hope someone has come up with something. I also build computers and have done some programming, so I could modify a file if needed with clear instructions.

This could be similar to bug https://bugbase.adobe.com/index.cfm?event=bug&id=3334814

Z22 sync with Win7 64 bit via IR: error that port is in use by another application.

I've read the solution for syncing a Z22 with Win7/Vista 64-bit. I have a USB-to-IrDA adapter that is working. I've set Hotsync on both the Z22 and PC to Infrared. When I start to sync, I get a message on the Z22: "Unable to initiate HotSync operation because the port is in use by another application". I can beam files from the Z22 to the PC with no problem. I'm not aware of any other app using the port. (When I put the Z22 in range of the IR adapter, the "send files" window comes up on the PC. I've tried syncing with this window open and closed, and the error's the same either way.) Any suggestions?
Post relates to: Palm Z22
Message Edited by jpendle on 12-01-2009 01:27 PM

We followed a suggestion from another post. And I wanted to add it here since it helped us after a lot of struggling. We connected/synced a Z22 to windows 7 64 bit PC via a IR adapter Startech USB2IRX. Using a driver downloaded directly from their website, not the CD that comes with the adapter, driver installation was smooth. The installation application installed it without problems. (I also tried an adapter from cables unlimited IrDA wireless bridge. Then I had to install the drivers for windows vista 64bit manually onto my win 7 64 bit machine.) After driver installation, we were getting an error indicating that the port is in use by another application. And we were stuck until I read a post which suggests a soft-reset on the palm. After that it was smooth sailing.
Palm really is going the way of the dinosaur-otherwise they would have had a usb driver for windows 7 64 at this point. But it you need to as I did you should be able to sync your device.

Itunes does not recognise ipad 2 with win7 64 bit but the computer recognises the ipad 2 as a camera. Works OK with win7 32 bit.

I have tried to sync both ipod and ipad2 (new) with itunes running on win 7 64 bit. I have all latest versions installed on all machines.
The ipod and ipad are just not recognised in itunes.
I have an old win7 32 bit system on the same machine and everything works perfectly.
Any ideas welcome.

http://randomwindowstips.wordpress.com/2009/12/08/windows-7-itunes-9-software-is -not-installed/.
This was the answer to all my problems, once i updated the drivers all good! My iPad kept insisting I didnt have the 64bit itunes (which i did) and when I checked the files I was supposed to have as per the link instructions, I had none of them. Disappointed I had to turn to some random files off a blog rather than having apple actually provide useful help. As long as they are making money though :Z

Acrobat 8 Standard not printing at PC with Win7 64 bit

Hello I installed Acrobat 8 Standard at brand new PC with Win7. It does not print into PDF although Acrobat itself works....
I tried to download updates from http://www.adobe.com/support/downloads/product.jsp?product=1&platform=Windows for version 8.x but it cannot be installed.
Please advice what to do.

It says (in Czech langugae) something like "Installation system of Windows cannot install repair tool for upgrade, because programme you want to upgrade was not found. It is also possibble this repair toll serves for upgrade of another version of the programme. Please check if programme you want to upgrade is installed in your PC and if you use correct repair tool"
This was an aswer when attempting to install
Adobe Acrobat 8.1 Professional and Standard update - multiple languages (AcrobatUpd810_euro_incr.msp)
Before it I installed this:
Adobe Installer Transform Tool
268KB
8/21/2008
Adobe Customization Wizard 8

Problem in accessing the url on client with win7 64 bit

Hello experts,
we recently install fusion 11.1.2.1.0 and database 11g.
scenario:
database server:(192.168.1.100)
plateform: window server 2008, 64 bit
product: oracle database 11g.
application server:(192.168.1.101)
plateform: window server 2008 64 bit
product: oracle fusion 11g(forms and report)
i sucessfully install and configure the forms configuration. my application is running on same application server.
url to access the application:
http://aserver:9001/forms/frmservlet?config=erp
url is accessing on the application server as well as client having 32 bit xp operating
system after insatlling the java.
but if same url is accessing on database server and clients with window7 64 bit, not accessing after installing the java as well.
please help
thanks
yash

Hi Amit
We also have this issue with weblogic webservices. Did you get any resolution for this issue.
When the service is executed for lesser number of hits, all the responses are processed properly. But as load (Number of hits for the same service) increases, few responses are failed to be parsed in the web service client. We could confirm that the producer responds with proper content type (text/xml)
Any help or pointers will be greatly appreciated.
Thanks,
Finny

Audition 1.0 and Win7 64-bit.

Hi all;
I still use an older version of Audition, 1.0, which works great with my Windows 7 64-bit version, except for DX plug-ins. None of them work. I get the following errors. (See screenshots.)
This makes Audition unusable until I restart the program. Everything else seems to work fine. Is this just an incompatability with old software?
Can I still upgrade to 1.5, or the latest 3.x version? Would these be fully compatiable with my machine?
(I used this plug-in only as an example. I get the same behaviour for all DirectX plug-ins.)
Thanks;
Artie

Hey, I used to have a Diamond PCI card somewhere.
I would say that all bets are off with the drivers, but there is a strong possibility that you could be hearing the problems with the sample rate converter in Windows 7 (and I think in Vista). This affects recording and playback, and the first line of defence is to make sure that the source audio's sample rate is the same as the "default sample rate" that is set in every area in the Windows Control panel audio area.
The sample rate converter built into XP has a range of settings that are usually set to "high quality", and sample rate conversion is rare anyway with that OS. With Windows 7, the concept of the newer Windows mixer irequires that the sample rate converter changes all the audio on the fly to the default ample rate, but the converter is not very good. This doesn't always affect the audio - anything using DirectX seems OK, but anything using "WaveOut" audio (eg YouTube playback) is affected.
Microsoft acknowledges the problem and have issued a patch at http://support.microsoft.com/kb/2653312

Yet another dead mic with Win7 64-bit upgrd - Portege M700

Title says it all. Mics used to work fine on this machine under Windows XP. Under Win7, except as I note below, the mic has inaudibly low volume with any Control Panel Sound settings. I've spent huge amounts of time trying to solve this. After seeing all the similar posts (with no solutions, it seems) from users of many different Toshiba laptops, I'm about to start spreading the meme across the Internet that Toshiba laptops can't use mics.
I started by upgrading to Win7 then adding just the 64-bit drivers I need from Toshiba's support site. No joy. Then I started from a clean Win7 upgrade (64-bit Home) using Toshiba's upgrade script. Nope. Installed latest generic drivers from Realtek. Hmm .. some progress, maybe: now with some Sound settings I can get slightly more volume but the mic input is drowned out by white noise-ish hissing. All right, disable any other sound sources I can adjust: disable Chicony webcam driver from Device Manager. Hmm, now mike volume can get fairly high but the hissing still drowns it out.
Toshiba: At some level, this is a problem between Microsoft and Realtek, I know. But you can help us. MS changed the audio model significantly since Win XP, including (god knows why!) giving up the little audio mixer app that used to let you adjust levels for different sound sources. And Realtek's generic driver doesn't provide one either. So just give us a way to adjust levels for different audio inputs! Maybe I haven't Googled sufficiently and some hacker out there has one, but I kinda doubt it ... if it requires driver-level access as I suspect, Microsoft's new DRM-motivated hammerlock limiting us to signed drivers prevents us from fixing this ourselves. (It also means we can't access our ext3 partitions without extreme measures, but that's another rant.) So CAN SOME TOSHIBA ENGINEER PLEASE LET MANAGEMENT KNOW THEY'RE ABOUT TO DESTROY THEIR LAPTOP FRANCHISE OVER AUDIO ISSUES? Just cut, paste, and forward a couple dozen of these threads. Sure, it's a career risk but (wo)man up to it! Audio really matters to laptop buyers nowadays ... without Skype, I'll have do carry Yet Another Device when I'm traveling. Heck, I've personally bought at least 6 Toshiba laptops over the years and I'm starting to shop for a replacement. Anything but Toshiba, I'm sorry to say :-(
Oh, in case somebody has an idea of something else I can try, the specific model is PPM70U-1KC01DB

Title says it all. Mics used to work fine on this machine under Windows XP. Under Win7, except as I note below, the mic has inaudibly low volume with any Control Panel Sound settings. I've spent huge amounts of time trying to solve this. After seeing all the similar posts (with no solutions, it seems) from users of many different Toshiba laptops, I'm about to start spreading the meme across the Internet that Toshiba laptops can't use mics.
I started by upgrading to Win7 then adding just the 64-bit drivers I need from Toshiba's support site. No joy. Then I started from a clean Win7 upgrade (64-bit Home) using Toshiba's upgrade script. Nope. Installed latest generic drivers from Realtek. Hmm .. some progress, maybe: now with some Sound settings I can get slightly more volume but the mic input is drowned out by white noise-ish hissing. All right, disable any other sound sources I can adjust: disable Chicony webcam driver from Device Manager. Hmm, now mike volume can get fairly high but the hissing still drowns it out.
Toshiba: At some level, this is a problem between Microsoft and Realtek, I know. But you can help us. MS changed the audio model significantly since Win XP, including (god knows why!) giving up the little audio mixer app that used to let you adjust levels for different sound sources. And Realtek's generic driver doesn't provide one either. So just give us a way to adjust levels for different audio inputs! Maybe I haven't Googled sufficiently and some hacker out there has one, but I kinda doubt it ... if it requires driver-level access as I suspect, Microsoft's new DRM-motivated hammerlock limiting us to signed drivers prevents us from fixing this ourselves. (It also means we can't access our ext3 partitions without extreme measures, but that's another rant.) So CAN SOME TOSHIBA ENGINEER PLEASE LET MANAGEMENT KNOW THEY'RE ABOUT TO DESTROY THEIR LAPTOP FRANCHISE OVER AUDIO ISSUES? Just cut, paste, and forward a couple dozen of these threads. Sure, it's a career risk but (wo)man up to it! Audio really matters to laptop buyers nowadays ... without Skype, I'll have do carry Yet Another Device when I'm traveling. Heck, I've personally bought at least 6 Toshiba laptops over the years and I'm starting to shop for a replacement. Anything but Toshiba, I'm sorry to say :-(
Oh, in case somebody has an idea of something else I can try, the specific model is PPM70U-1KC01DB

Basic host scan (CSD) won't work with Win7 (64-Bit)

Hi all,
We got a customer with an ASA5510, Cisco Secure Desktop (3.6.5005) and Host Scan Engine 3.0.07042 for SSL Web-VPN.
There are some basic host scan checks, like windows process names / AV during login.
On the endpoints with Windows 7 (32-Bit) and Windows XP, the "debug dap trace" shows, that the host scan recognize the status of the process.
On Windows 7 (64-bit) unfortunately not. The AV check is working properly.
Is there an issue with 64-Bit?
Any ideas?
Thanks,
Norbert

since bootcamp allows windows to run natively, it's not an imac issue, but rather an issue with your windows, so you probably get better answers in a windows forum or the crysis forums.
in any case, installing newer ATI drivers (ati.com) might help, but it's just a wild guess

I got a new acer pc with Win7 64-bit and itunes download won't open, it says 'This installation package could not be opened. Verify that the package exists and that you can access it, or contact the application vendor to verify that this is a valid win'

I've tried to download Itunes and itunes for 64-bit using mozilla firefox and internet explorer, even deleted the browsing history and closed and tried to dowload again and tried download quicktime separately, but nothing seems to work.

Try right clicking on the installer and select run as administrator.

PDF Export option greyed out in DIAdem 11.1 with Win7 64-bit

In DIAdem Report tab, the "PDF Export..." (Under menuitem "File") option is visible but greyed out.

Hello NI_LV_82_User,
The DIAdem PDF output is not compatible with Windows 7 (DIAdem 11.1 was released in July 2009, Windows 7 was made available in October 2009). The DIAdem R&D department is currently working on a fix to add this functionality under Windows 7. We are working to provide a solution as soon as possible and will make the release of the Service Pack known here on the forum as soon as it is available.
Message Edited by Otmar on 11-30-2009 02:13 PM
Otmar D. Foehner
Business Development Manager
DIAdem and Test Data Management
National Instruments
Austin, TX - USA
"For an optimist the glass is half full, for a pessimist it's half empty, and for an engineer is twice bigger than necessary."

Any word on a new version compatible with Win7 64 bit IE8

Hope so, I dont want to go back to a 32 bit version, because everytime there is an IE8 MS update, it upgrades to 64 bit

You will probably get more help on iTunes for Windows forum:
https://discussions.apple.com/community/itunes/itunes_for_windows

Crashes on Mac side when running Win7 64 bit in bootcamp as VM in Parallels

I got my MacBookPro mid April 2010. Microsoft store partitioned & set up bootcamp with Win7 64 bit. I then Purchased Parallels 5 & set it up using the bootcamp partition as the Virtual machine. Not knowing what I was doing at 1st, I accidentally created a 2nd VM the 1st time I tried to use it & didn't know how to get rid of it until a couple weeks ago.
It was all working pretty well until about Feb 19 when I was at the office trying to take notes in Pages. I had just started when it started alternating between Pages, desktop & blue screen then pages quit. Same when I reopened pages so just shut down & an hr or so later was ok. Over a period of about a wk rapidly increasing # of crashes of Safari & Pages to where it was becoming hard to use. Went to Genius bar who told me to do archive & install after back up. Had to go research & buy back up HD & before I could back up it got so bad it wouldn't even boot. Apple care helped me do Archive & install over the phone. Much better but still problems. Fri he checked back & had me reset Safari & empty Safari & other caches. Then Parallels crashed. So shut down & booted into bootcamp. It was also messed up.
Then remembered the old, if all else fails trick of shutting it down & leaving it for a bit to clear out the volatile memory. Came back & booted into bootcamp & opened Outlook etc. Ok. Then booted into Mac & then parallels & it was ok.
But problems continued. Repaired preferences, etc. I also found out that i didn't have the latest build of Parallels 5 (from the Parallels user forums) even though the update process said I did. They seemed rather techie. I finally did figure out how to download & install the latest build of Parallels. Not sure if that helped or why the check update from the pull down menu acted like it was checking & then told me I had the latest one but mine was several builds older than the current 1.
Along the way, I finally learned how to delete the duplicate VM & it worked better for awhile, but then was getting bad. I verified the disk in Disk utility & it stopped almost immediately & said it needed to be repaired. Genius bar did that.Erase & install was mentioned. then more crashes, more problems so again verified disk & it ran longer but again stopped & said repair needed. Went into Genius bar on 3-25 for erase & install. Got it back next day but I think maybe the genius (who I had asked to help set up bootcamp partition) restored more than just the users which is what the head genius had said was the only thing to restore. Not sure, but it appears my new settings are showing. & it appears that whatever was corrupted may have been restored as well, not sure. Made another appt for genius bar to help get things right.
The tests that were run showed that the hardware was ok. Several people told me while this was going on that it was likely related to running Windows on a mac & especially as a VM, & then someone or 2 also mentioned that running in coherence mode could be an issue.
This whole thing has been very frustrating & isn't what I expected after coming back to mac, but still needing to run windows for business software. My old macs never had problems. My brother said his macs are reliable & don't have problems.
When it got so that I couldn't even boot on the mac side the 1st time, I was able to boot into bootcamp & had to do drag & drop backup of mac files to my windows external HD. But before & after that when Safari was crashing so much it wasn't very useful, I did better in IE running in Parallels.
What I'm wondering is what might have caused this & more specifically, what can I do to avoid it happening again? A major reason that I use Parallels all the time is that I sync a windows mobile 6,5 phone with Outlook so its not very convenient to have to boot into bootcamp to check email.
The fingers have been pointed at maybe the partition getting messed up but no real answers so far. So while I assume we will get it working ok again, I'm afraid the same thing could happen again. It was suggested that it may have been doing little things kind of behind the scenes where it was getting corrupted a little bit by little bit which didn't show up until the rapidly cascading events that lead to the erase & install. So I don't know if that was the case or if something happened around Feb 19 when I first really noticed the problems (although there may have been some unexpected quits before then, but not bad or repeated). Sorry this is so long.

Chris,
Thanks for the info/suggestions. I had already done the "clean install" without knowing it. I also had uninstalled Firefox and Chrome and was looking at dumping Safari, but I found the culprit file "_Flash Player.plugin" (version10.2.151.49) on a search for "Flash Player" under Spotlight.
Strange thing was the file did not appear when just browsing through the various directories or searching with finder. Removed it and all is good.
Mike

Installing Indesign CS2 on WIN7 64-Bit

Hello,
i tried to install InDesign CS2 Upgrade from the original CD-Rom on a new PC with WIN7 64-bit.
To activate the installation I used the serial number from the version 1.0 IGP100R7012137-635 from the original register card from InDesign 1.0.
This combination was used since any years on my old XP-PC and now I want to use it on the new system.
What happened: InDesign CS2 said during the installation process: this serial no. IGP100R7012137-635 is not an InDesing serial no.
I contacted Adobe via chat and they said, I need an InDesign CS2 version without need for activation, because Adobe killed the server for this function because of technical reasons.
My question: from where can I get these InDesign CS2 version without need for activation?
The serial number from my CS2 InDesign is: Deleted by moderator.
Who can help or knows an easier solution?
Thank you in advance for help!
Renate.

NEVER post a serial number on a public forum and be aware that CS2 is totally unsupported on Windows 7 and will be even worse on a 64 bit system. Heed the warning on that page:
Adobe does not support CS2 applications, which were released more than seven years ago. Adobe strongly advises against running unsupported and outdated software.

Audition 1.5 with Win7 64 bit

Similar Messages

Maybe you are looking for