Audition 1.5 won't start up

I've been using Audition 1.5 for many years, generally to slow down and transcribe music.
It's been reliable and I have had no problems.  I run Windows XP.
Today it won't start up.  The message is get is: "There was an unknown error starting the application".
I look in the event viewer on Windows, but see no error messages.
Drilling down into the program, all the sound files are still there.
Earlier this week, I installed Adobe Photoshop Elements and Premiere Elements.
Would there possibly be a conflict?
Any advice much appreciated.
Thank you.
John

Soundbooth CS5 do not problem about recording when I install it . In Control Panel Window7 , playback tab Speakers is default device and recording tab is stereo mix is default . When I open Soundbooth CS5 , it will detect this configuration automatically . I can record sound on web by press record on soundbooth.
Soundbooth is the best program as same as Audition CS3 . I used the method to setup the same. It do not have problem about recording .
But Audition CS5.5 has problem about recording when I would record with setting up the same . I am very puzzle . I do not understand audition cs5.5 not same Older version . Why ? It is very difficult .
In Audio Hardware , Default Input : Stereo Mix( Realtek High Definition Audio ) Not working
                             Default Output: Speakers ( Realtek High Definition Audio)
                             Master Clock: Out:Speakers( Realtek High Definition Audio)
                             Latency: 200
                             Sample Rate: 44100 HZ
In Control Panel Sound : Sample Rate : 44100HZ 16 bit
The result is
" The selected audio device has no input channels available."
In the present , I can not solve this problem . Please help me too
In the near future  , if i can not solve this problem . I will decide to come back at Soundbooth CS5 . Thank you

Similar Messages

  • Audition cs5.5 won't start to play or record

    I just installed audition cs5.5. I was able to open an existing mp3 file and edit it, but when i tried to open a new file to make a recording, it wouldn't respond.
    This is what happened...
    I clicked file - audio - new - audio file, and the editor appears. I tried to drag the "current time indicator" but it wouldn't move. I tried to click "record" and "play" but there was no response.Did I do something wrong?

    Soundbooth CS5 do not problem about recording when I install it . In Control Panel Window7 , playback tab Speakers is default device and recording tab is stereo mix is default . When I open Soundbooth CS5 , it will detect this configuration automatically . I can record sound on web by press record on soundbooth.
    Soundbooth is the best program as same as Audition CS3 . I used the method to setup the same. It do not have problem about recording .
    But Audition CS5.5 has problem about recording when I would record with setting up the same . I am very puzzle . I do not understand audition cs5.5 not same Older version . Why ? It is very difficult .
    In Audio Hardware , Default Input : Stereo Mix( Realtek High Definition Audio ) Not working
                                 Default Output: Speakers ( Realtek High Definition Audio)
                                 Master Clock: Out:Speakers( Realtek High Definition Audio)
                                 Latency: 200
                                 Sample Rate: 44100 HZ
    In Control Panel Sound : Sample Rate : 44100HZ 16 bit
    The result is
    " The selected audio device has no input channels available."
    In the present , I can not solve this problem . Please help me too
    In the near future  , if i can not solve this problem . I will decide to come back at Soundbooth CS5 . Thank you

  • Audition 3.0 won't start

    After installing the trial version on my Vista system, Audition asks for it's temp drives. After that the following error message is displayed:
    "Audition has encountered an error:
    [\premiere 2.0\Libraries\Asl\Foundation\Src\PathUtils.cpp-741]"
    And then Audition shuts down.
    As I don't have Premiere, I don't know what to do.....

    I haven't forgotten about this issue, but I haven't had any luck getting it to reproduce on my primary Vista machine, or any of the VMWare images I've setup.
    Michael - you mentioned you'd moved the AppData folders from your old user account to the new one and it seemed to work until you moved the Microsoft & Adobe folders. The only one that SHOULD make any difference is the Adobe folder. (This MAY not be the case if there's some third-party codecs or monitoring applications, but generally, these folders are primarily storage for preferences, profiles, and presets.)
    If you create a new user profile, copy all of the AppData folders from your main account EXCEPT the Adobe folder, does Audition launch successfully multiple times? The first launch will create its default set of files. The subsequent launches will address these already created files.
    If this works, the next step would be to move the CONTENTS of your old AppData\Adobe\ folder to the new one WITH THE EXCEPTION OF THE AUDITION FOLDERS.
    Don't install any updates or try to uninstall/reinstall Audition during this time. If it continues to operate okay, my next suggestion would be to copy the working \AppData\Adobe\Audition\ folder and overwrite the existing folders on your main user account. If it works on one account but not the other, with the exact same preference files, we may be barking up the wrong tree and can look into other possible causes.
    Thanks,
    Durin

  • Audition won't start after configuring ASIO drivers

    I installed a trial version of Audition 3.0 and everything ran good until I set it to use ASIO drivers I have installed for Pro Tools.  Audition and Pro Tools fail to launch and IE won't start unless I re-boot and use it first.  I'm using the digidesign ASIO drivers for MBox.  I've uninstalled the drivers with the same result.  I un-intalled Audition and of course when re-installing the trial product it thinks it is past eh expiration date (installed it yesterday for the first time).
    Anyone know of a good workaround?

    Mahiman2 wrote:
    Anyone know of a good workaround?
    We've been here before - even if I wasn't biased, I'd still say ditch ProTools, just based on the irrefutable evidence. Their so-called 'drivers' only really work with their hardware, and PT in general only really works with its own hardware too. You can't uninstall and reinstall the trial version of Audition and have it work, as far as I know - and the protection scheme is extremely devious and extensive - there are no fixes at all for this - with the possible exception of reformatting your hard disk. No, not just wiping, but actually reformatting it.
    Audition and PT simply don't mix. PT is a generally inferior product (certainly in terms of its hardware) and the manufacturers use protectionist schemes to interfere with anything else audio on your machine, it would seem. If you can find a universal fix for this, the whole world's waiting - but not holding its breath.

  • X11 won't start

    Ever since upgrading to Leper, X11 won't start. If I open the console window, the following is logged repetitively, which looks like an invalid start command that is followed by command line help. Anybody know what I can do to fix this?
    Console output:
    7/16/08 10:14:06 PM org.x.X11[404] X11.app = /usr/X11/X11.app/Contents/MacOS/X11
    7/16/08 10:14:06 PM org.x.X11[404] Unrecognized option: -launchd
    7/16/08 10:14:06 PM org.x.X11[404] use: X [:<display>] [option]
    7/16/08 10:14:06 PM org.x.X11[404] -a # mouse acceleration (pixels)
    7/16/08 10:14:06 PM org.x.X11[404] -ac disable access control restrictions
    7/16/08 10:14:06 PM org.x.X11[404] -audit int set audit trail level
    7/16/08 10:14:06 PM org.x.X11[404] -auth file select authorization file
    7/16/08 10:14:06 PM org.x.X11[404] -br create root window with black background
    7/16/08 10:14:06 PM org.x.X11[404] +bs enable any backing store support
    7/16/08 10:14:06 PM org.x.X11[404] -bs disable any backing store support
    7/16/08 10:14:06 PM org.x.X11[404] -c turns off key-click
    7/16/08 10:14:06 PM org.x.X11[404] c # key-click volume (0-100)
    7/16/08 10:14:06 PM org.x.X11[404] -cc int default color visual class
    7/16/08 10:14:06 PM org.x.X11[404] -co file color database file
    7/16/08 10:14:06 PM org.x.X11[404] -core generate core dump on fatal error
    7/16/08 10:14:06 PM org.x.X11[404] -dpi int screen resolution in dots per inch
    7/16/08 10:14:06 PM org.x.X11[404] dpms enables VESA DPMS monitor control
    7/16/08 10:14:06 PM org.x.X11[404] -dpms disables VESA DPMS monitor control
    7/16/08 10:14:06 PM org.x.X11[404] -deferglyphs [none|all|16] defer loading of [no|all|16-bit] glyphs
    7/16/08 10:14:06 PM org.x.X11[404] -f # bell base (0-100)
    7/16/08 10:14:06 PM org.x.X11[404] -fc string cursor font
    7/16/08 10:14:06 PM org.x.X11[404] -fn string default font name
    7/16/08 10:14:06 PM org.x.X11[404] -fp string default font path
    7/16/08 10:14:06 PM org.x.X11[404] -help prints message with these options
    7/16/08 10:14:06 PM org.x.X11[404] -I ignore all remaining arguments
    7/16/08 10:14:06 PM org.x.X11[404] -ld int limit data space to N Kb
    7/16/08 10:14:06 PM org.x.X11[404] -lf int limit number of open files to N
    7/16/08 10:14:06 PM org.x.X11[404] -ls int limit stack space to N Kb
    7/16/08 10:14:06 PM org.x.X11[404] -nolock disable the locking mechanism
    7/16/08 10:14:06 PM org.x.X11[404] -logo enable logo in screen saver
    7/16/08 10:14:06 PM org.x.X11[404] nologo disable logo in screen saver
    7/16/08 10:14:06 PM org.x.X11[404] -nolisten string don't listen on protocol
    7/16/08 10:14:06 PM org.x.X11[404] -noreset don't reset after last client exists
    7/16/08 10:14:06 PM org.x.X11[404] -reset reset after last client exists
    7/16/08 10:14:06 PM org.x.X11[404] -p # screen-saver pattern duration (minutes)
    7/16/08 10:14:06 PM org.x.X11[404] -pn accept failure to listen on all ports
    7/16/08 10:14:06 PM org.x.X11[404] -nopn reject failure to listen on all ports
    7/16/08 10:14:06 PM org.x.X11[404] -r turns off auto-repeat
    7/16/08 10:14:06 PM org.x.X11[404] r turns on auto-repeat
    7/16/08 10:14:06 PM org.x.X11[404] -render [default|mono|gray|color] set render color alloc policy
    7/16/08 10:14:06 PM org.x.X11[404] -s # screen-saver timeout (minutes)
    7/16/08 10:14:06 PM org.x.X11[404] -sp file security policy file
    7/16/08 10:14:06 PM org.x.X11[404] -su disable any save under support
    7/16/08 10:14:06 PM org.x.X11[404] -t # mouse threshold (pixels)
    7/16/08 10:14:06 PM org.x.X11[404] -terminate terminate at server reset
    7/16/08 10:14:06 PM org.x.X11[404] -to # connection time out
    7/16/08 10:14:06 PM org.x.X11[404] -tst disable testing extensions
    7/16/08 10:14:06 PM org.x.X11[404] ttyxx server started from init on /dev/ttyxx
    7/16/08 10:14:06 PM org.x.X11[404] v video blanking for screen-saver
    7/16/08 10:14:06 PM org.x.X11[404] -v screen-saver without video blanking
    7/16/08 10:14:06 PM org.x.X11[404] -wm WhenMapped default backing-store
    7/16/08 10:14:06 PM org.x.X11[404] -wr create root window with white background
    7/16/08 10:14:06 PM org.x.X11[404] -x string loads named extension at init time
    7/16/08 10:14:06 PM org.x.X11[404] -maxbigreqsize set maximal bigrequest size
    7/16/08 10:14:06 PM org.x.X11[404] +xinerama Enable XINERAMA extension
    7/16/08 10:14:06 PM org.x.X11[404] -xinerama Disable XINERAMA extension
    7/16/08 10:14:06 PM org.x.X11[404] -dumbSched Disable smart scheduling, enable old behavior
    7/16/08 10:14:06 PM org.x.X11[404] -schedInterval int Set scheduler interval in msec
    7/16/08 10:14:06 PM org.x.X11[404] +extension name Enable extension
    7/16/08 10:14:06 PM org.x.X11[404] -extension name Disable extension
    7/16/08 10:14:06 PM org.x.X11[404] -query host-name contact named host for XDMCP
    7/16/08 10:14:06 PM org.x.X11[404] -broadcast broadcast for XDMCP
    7/16/08 10:14:06 PM org.x.X11[404] -multicast [addr [hops]] IPv6 multicast for XDMCP
    7/16/08 10:14:06 PM org.x.X11[404] -indirect host-name contact named host for indirect XDMCP
    7/16/08 10:14:06 PM org.x.X11[404] -port port-num UDP port number to send messages to
    7/16/08 10:14:06 PM org.x.X11[404] -from local-address specify the local address to connect from
    7/16/08 10:14:06 PM org.x.X11[404] -once Terminate server after one session
    7/16/08 10:14:06 PM org.x.X11[404] -class display-class specify display class to send in manage
    7/16/08 10:14:06 PM org.x.X11[404] -cookie xdm-auth-bits specify the magic cookie for XDMCP
    7/16/08 10:14:06 PM org.x.X11[404] -displayID display-id manufacturer display ID for request
    7/16/08 10:14:06 PM org.x.X11[404] -kb disable the X Keyboard Extension
    7/16/08 10:14:06 PM org.x.X11[404] +kb enable the X Keyboard Extension
    7/16/08 10:14:06 PM org.x.X11[404] [+-]accessx [ timeout [ timeout_mask [ feedback [ options_mask] ] ] ]
    7/16/08 10:14:06 PM org.x.X11[404] enable/disable accessx key sequences
    7/16/08 10:14:06 PM org.x.X11[404] -ardelay set XKB autorepeat delay
    7/16/08 10:14:06 PM org.x.X11[404] -arinterval set XKB autorepeat interval
    7/16/08 10:14:06 PM org.x.X11[404] Device Dependent Usage:
    7/16/08 10:14:06 PM org.x.X11[404] -fakebuttons : fake a three button mouse with Command and Option keys.
    7/16/08 10:14:06 PM org.x.X11[404] -nofakebuttons : don't fake a three button mouse.
    7/16/08 10:14:06 PM org.x.X11[404] -fakemouse2 <modifiers> : fake middle mouse button with modifier keys.
    7/16/08 10:14:06 PM org.x.X11[404] -fakemouse3 <modifiers> : fake right mouse button with modifier keys.
    7/16/08 10:14:06 PM org.x.X11[404] ex: -fakemouse2 "option,shift" = option-shift-click is middle button.
    7/16/08 10:14:06 PM org.x.X11[404] -keymap <file> : read the keymapping from a file instead of the kernel.
    7/16/08 10:14:06 PM org.x.X11[404] -version : show the server version.
    7/16/08 10:14:06 PM org.x.X11[404] Quartz modes:
    7/16/08 10:14:06 PM org.x.X11[404] -fullscreen : run full screen in parallel with Mac OS X window server.
    7/16/08 10:14:06 PM org.x.X11[404] -rootless : run rootless inside Mac OS X window server.
    7/16/08 10:14:06 PM org.x.X11[404] -quartz : use default Mac OS X window server mode
    7/16/08 10:14:06 PM org.x.X11[404] Options ignored in rootless mode:
    7/16/08 10:14:06 PM org.x.X11[404] -size <height> <width> : use a screen resolution of <height> x <width>.
    7/16/08 10:14:06 PM org.x.X11[404] -depth <8,15,24> : use this bit depth.
    7/16/08 10:14:06 PM org.x.X11[404] -refresh <rate> : use a monitor refresh rate of <rate> Hz.
    7/16/08 10:14:06 PM org.x.X11[404] Fatal server error:
    7/16/08 10:14:06 PM org.x.X11[404] Unrecognized option: -launchd
    7/16/08 10:14:06 PM org.x.X11[404] AbortDDX
    7/16/08 10:14:06 PM org.x.X11[404] Quitting Xquartz...
    7/16/08 10:14:18 PM com.apple.launchd[101] (org.x.X11[404]) Exited with exit code: 1

    I too am having this problem. People are all reporting different causes.
    The cause might be solved by this solution at MacOSXHints.com
    http://www.macosxhints.com/article.php?story=20080622105055862
    They sugguest removing the -launchd boot option from your Xorg plist file. I did this and it did not fix the problem for me, I still get the Unrecognized option: -launchd. But other users have reported success, so it's worth a shot.
    You might also look into what the guys in this thread (http://discussions.apple.com/thread.jspa?threadID=1402209&tstart=205) did to try to solve launching problems.

  • X11 won't start (sets monitor to standby) with nVidia card

    Hello everyone!
    I'm having some trouble getting my computer to work properly. Yesterday it was working perfectly, but today it would't start again. After some troubleshooting I've determined that the problem lies with X11 and the graphics driver. The bootloader, grub, and arch itself, boots perfectly in runlevel 3, but the moment you run "startx" it would appear to be loading for a while and finally the screen goes to standby mode and there is no way out of that other than reseting the computer using the reset button. I've tried uninstalling the nvidia drivers and installing nouveau drivers, but it still won't start X, this time arround, it would just hang up with a white screen.
    I've also tried removing xorg.conf and also using nvidia utility to generate a new one, but neither seems to work.
    /var/log/Xorg.0.log doesn't report any errors, it just gives different info from the configuration and the graphics card and just ends there.
    I've tried booting with a debian live USB but it would't boot either (the computer would just restart). I've also tried a Kubuntu live USB, this time arround, it would start to boot but the graphics appeared to be corrupted (strange colored noise all over the screen) and eventually it would just hang up. Using nomodeset Kubuntu finally booted (using vesa I guess?), but the same didn't work in Arch (I'm guessing because I have the nvidia drivers installed instead of nouveau).
    In conclussion, something appears to be wrong with the graphics card, I dont't know if it's a software problem or a hardware problem, as it started from one day to the other, without any upgrades in between, and it just doesn't work in any of the 3 distributions I've tested.
    Any suggestions in what to do to troubleshoot this?
    Thanks in advance,
    Santiago.-

    Xorg.0.log
    [ 35.560]
    X.Org X Server 1.14.4
    Release Date: 2013-10-31
    [ 35.560] X Protocol Version 11, Revision 0
    [ 35.560] Build Operating System: Linux 3.11.6-1-ARCH x86_64
    [ 35.561] Current Operating System: Linux arch 3.11.6-1-ARCH #1 SMP PREEMPT Fri Oct 18 23:22:36 CEST 2013 x86_64
    [ 35.561] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-linux root=UUID=17d019be-e01f-4c1c-ac50-69e1f3dc0592 rw quiet 3
    [ 35.562] Build Date: 01 November 2013 05:10:48PM
    [ 35.562]
    [ 35.562] Current version of pixman: 0.30.2
    [ 35.562] Before reporting problems, check http://wiki.x.org
    to make sure that you have the latest version.
    [ 35.562] Markers: (--) probed, (**) from config file, (==) default setting,
    (++) from command line, (!!) notice, (II) informational,
    (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
    [ 35.564] (==) Log file: "/var/log/Xorg.0.log", Time: Mon Nov 4 21:35:07 2013
    [ 35.576] (==) Using config file: "/etc/X11/xorg.conf"
    [ 35.576] (==) Using config directory: "/etc/X11/xorg.conf.d"
    [ 35.577] (==) ServerLayout "Layout0"
    [ 35.577] (**) |-->Screen "Screen0" (0)
    [ 35.577] (**) | |-->Monitor "Monitor0"
    [ 35.577] (**) | |-->Device "Device0"
    [ 35.577] (**) |-->Input Device "Keyboard0"
    [ 35.577] (**) |-->Input Device "Mouse0"
    [ 35.577] (==) Automatically adding devices
    [ 35.577] (==) Automatically enabling devices
    [ 35.577] (==) Automatically adding GPU devices
    [ 35.603] (WW) The directory "/usr/share/fonts/OTF/" does not exist.
    [ 35.603] Entry deleted from font path.
    [ 35.603] (WW) The directory "/usr/share/fonts/Type1/" does not exist.
    [ 35.603] Entry deleted from font path.
    [ 35.603] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/100dpi/".
    [ 35.603] Entry deleted from font path.
    [ 35.603] (Run 'mkfontdir' on "/usr/share/fonts/100dpi/").
    [ 35.604] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/75dpi/".
    [ 35.604] Entry deleted from font path.
    [ 35.604] (Run 'mkfontdir' on "/usr/share/fonts/75dpi/").
    [ 35.604] (==) FontPath set to:
    /usr/share/fonts/misc/,
    /usr/share/fonts/TTF/
    [ 35.604] (==) ModulePath set to "/usr/lib/xorg/modules"
    [ 35.604] (WW) Hotplugging is on, devices using drivers 'kbd', 'mouse' or 'vmmouse' will be disabled.
    [ 35.604] (WW) Disabling Keyboard0
    [ 35.604] (WW) Disabling Mouse0
    [ 35.604] (II) Loader magic: 0x7fdc20
    [ 35.604] (II) Module ABI versions:
    [ 35.604] X.Org ANSI C Emulation: 0.4
    [ 35.604] X.Org Video Driver: 14.1
    [ 35.604] X.Org XInput driver : 19.1
    [ 35.604] X.Org Server Extension : 7.0
    [ 35.604] (II) xfree86: Adding drm device (/dev/dri/card0)
    [ 35.605] (--) PCI:*(0:1:0:0) 10de:0421:1682:2353 rev 161, Mem @ 0xfa000000/16777216, 0xd0000000/268435456, 0xf8000000/33554432, I/O @ 0x0000e000/128, BIOS @ 0x????????/131072
    [ 35.606] Initializing built-in extension Generic Event Extension
    [ 35.606] Initializing built-in extension SHAPE
    [ 35.606] Initializing built-in extension MIT-SHM
    [ 35.606] Initializing built-in extension XInputExtension
    [ 35.606] Initializing built-in extension XTEST
    [ 35.607] Initializing built-in extension BIG-REQUESTS
    [ 35.607] Initializing built-in extension SYNC
    [ 35.607] Initializing built-in extension XKEYBOARD
    [ 35.607] Initializing built-in extension XC-MISC
    [ 35.608] Initializing built-in extension SECURITY
    [ 35.608] Initializing built-in extension XINERAMA
    [ 35.608] Initializing built-in extension XFIXES
    [ 35.608] Initializing built-in extension RENDER
    [ 35.608] Initializing built-in extension RANDR
    [ 35.609] Initializing built-in extension COMPOSITE
    [ 35.609] Initializing built-in extension DAMAGE
    [ 35.609] Initializing built-in extension MIT-SCREEN-SAVER
    [ 35.609] Initializing built-in extension DOUBLE-BUFFER
    [ 35.619] Initializing built-in extension RECORD
    [ 35.629] Initializing built-in extension DPMS
    [ 35.638] Initializing built-in extension X-Resource
    [ 35.647] Initializing built-in extension XVideo
    [ 35.656] Initializing built-in extension XVideo-MotionCompensation
    [ 35.665] Initializing built-in extension XFree86-VidModeExtension
    [ 35.673] Initializing built-in extension XFree86-DGA
    [ 35.682] Initializing built-in extension XFree86-DRI
    [ 35.690] Initializing built-in extension DRI2
    [ 35.690] (II) LoadModule: "glx"
    [ 35.757] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
    [ 36.111] (II) Module glx: vendor="NVIDIA Corporation"
    [ 36.111] compiled for 4.0.2, module version = 1.0.0
    [ 36.111] Module class: X.Org Server Extension
    [ 36.111] (II) NVIDIA GLX Module 325.15 Wed Jul 31 18:12:00 PDT 2013
    [ 36.126] Loading extension GLX
    [ 36.126] (II) LoadModule: "nvidia"
    [ 36.136] (II) Loading /usr/lib/xorg/modules/drivers/nvidia_drv.so
    [ 36.195] (II) Module nvidia: vendor="NVIDIA Corporation"
    [ 36.195] compiled for 4.0.2, module version = 1.0.0
    [ 36.195] Module class: X.Org Video Driver
    [ 36.197] (II) NVIDIA dlloader X Driver 325.15 Wed Jul 31 17:50:57 PDT 2013
    [ 36.197] (II) NVIDIA Unified Driver for all Supported NVIDIA GPUs
    [ 36.197] (--) using VT number 2
    [ 36.248] (II) Loading sub module "fb"
    [ 36.248] (II) LoadModule: "fb"
    [ 36.259] (II) Loading /usr/lib/xorg/modules/libfb.so
    [ 36.270] (II) Module fb: vendor="X.Org Foundation"
    [ 36.270] compiled for 1.14.4, module version = 1.0.0
    [ 36.270] ABI class: X.Org ANSI C Emulation, version 0.4
    [ 36.270] (WW) Unresolved symbol: fbGetGCPrivateKey
    [ 36.270] (II) Loading sub module "wfb"
    [ 36.270] (II) LoadModule: "wfb"
    [ 36.270] (II) Loading /usr/lib/xorg/modules/libwfb.so
    [ 36.271] (II) Module wfb: vendor="X.Org Foundation"
    [ 36.271] compiled for 1.14.4, module version = 1.0.0
    [ 36.271] ABI class: X.Org ANSI C Emulation, version 0.4
    [ 36.271] (II) Loading sub module "shadow"
    [ 36.271] (II) LoadModule: "shadow"
    [ 36.271] (II) Loading /usr/lib/xorg/modules/libshadow.so
    [ 36.272] (II) Module shadow: vendor="X.Org Foundation"
    [ 36.272] compiled for 1.14.4, module version = 1.1.0
    [ 36.272] ABI class: X.Org ANSI C Emulation, version 0.4
    [ 36.272] (II) Loading sub module "ramdac"
    [ 36.272] (II) LoadModule: "ramdac"
    [ 36.272] (II) Module "ramdac" already built-in
    [ 36.274] (**) NVIDIA(0): Depth 24, (--) framebuffer bpp 32
    [ 36.274] (==) NVIDIA(0): RGB weight 888
    [ 36.274] (==) NVIDIA(0): Default visual is TrueColor
    [ 36.274] (==) NVIDIA(0): Using gamma correction (1.0, 1.0, 1.0)
    [ 36.274] (**) NVIDIA(0): Option "UseEdidDpi" "False"
    [ 36.274] (**) NVIDIA(0): Option "DPI" "96 x 96"
    [ 36.274] (**) NVIDIA(0): Enabling 2D acceleration
    [ 50.151] (II) NVIDIA(GPU-0): Found DRM driver nvidia-drm (20130102)
    [ 50.256] (II) NVIDIA(GPU-0): Display (Samsung SMB2330H (CRT-0)) does not support NVIDIA 3D
    [ 50.256] (II) NVIDIA(GPU-0): Vision stereo.
    [ 50.256] (II) NVIDIA(0): NVIDIA GPU GeForce 8500 GT (G86) at PCI:1:0:0 (GPU-0)
    [ 50.256] (--) NVIDIA(0): Memory: 1048576 kBytes
    [ 50.256] (--) NVIDIA(0): VideoBIOS: 60.86.41.00.85
    [ 50.256] (II) NVIDIA(0): Detected PCI Express Link width: 16X
    journalctl -xb
    -- Logs begin at Sat 2013-08-17 21:55:41 ART, end at Mon 2013-11-04 22:01:35 ART. --
    Nov 04 21:59:09 arch systemd-journal[120]: Runtime journal is using 364.0K (max 100.1M, leaving 150.2M of free 1001.3M, current limit 100.1M).
    Nov 04 21:59:09 arch systemd-journal[120]: Runtime journal is using 368.0K (max 100.1M, leaving 150.2M of free 1001.3M, current limit 100.1M).
    Nov 04 21:59:09 arch kernel: Initializing cgroup subsys cpuset
    Nov 04 21:59:09 arch kernel: Initializing cgroup subsys cpu
    Nov 04 21:59:09 arch kernel: Initializing cgroup subsys cpuacct
    Nov 04 21:59:09 arch kernel: Linux version 3.11.6-1-ARCH (nobody@var-lib-archbuild-extra-x86_64-thomas) (gcc version 4.8.1 20130725 (prerelease) (GCC) ) #1 SMP PREEMPT Fri Oct 18 23:22:36 CEST 2013
    Nov 04 21:59:09 arch kernel: Command line: BOOT_IMAGE=/boot/vmlinuz-linux root=UUID=17d019be-e01f-4c1c-ac50-69e1f3dc0592 rw quiet 3
    Nov 04 21:59:09 arch kernel: e820: BIOS-provided physical RAM map:
    Nov 04 21:59:09 arch kernel: BIOS-e820: [mem 0x0000000000000000-0x000000000009fbff] usable
    Nov 04 21:59:09 arch kernel: BIOS-e820: [mem 0x000000000009fc00-0x000000000009ffff] reserved
    Nov 04 21:59:09 arch kernel: BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
    Nov 04 21:59:09 arch kernel: BIOS-e820: [mem 0x0000000000100000-0x000000007fbb4fff] usable
    Nov 04 21:59:09 arch kernel: BIOS-e820: [mem 0x000000007fbb5000-0x000000007fbf7fff] ACPI NVS
    Nov 04 21:59:09 arch kernel: BIOS-e820: [mem 0x000000007fbf8000-0x000000007fd4bfff] reserved
    Nov 04 21:59:09 arch kernel: BIOS-e820: [mem 0x000000007fd4c000-0x000000007fd51fff] ACPI data
    Nov 04 21:59:09 arch kernel: BIOS-e820: [mem 0x000000007fd52000-0x000000007fd52fff] ACPI NVS
    Nov 04 21:59:09 arch kernel: BIOS-e820: [mem 0x000000007fd53000-0x000000007fd54fff] ACPI data
    Nov 04 21:59:09 arch kernel: BIOS-e820: [mem 0x000000007fd55000-0x000000007fd56fff] ACPI NVS
    Nov 04 21:59:09 arch kernel: BIOS-e820: [mem 0x000000007fd57000-0x000000007fd57fff] reserved
    Nov 04 21:59:09 arch kernel: BIOS-e820: [mem 0x000000007fd58000-0x000000007fd5bfff] ACPI NVS
    Nov 04 21:59:09 arch kernel: BIOS-e820: [mem 0x000000007fd5c000-0x000000007fd6afff] reserved
    Nov 04 21:59:09 arch kernel: BIOS-e820: [mem 0x000000007fd6b000-0x000000007fefffff] usable
    Nov 04 21:59:09 arch kernel: BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved
    Nov 04 21:59:09 arch kernel: BIOS-e820: [mem 0x00000000ffa00000-0x00000000ffbfffff] reserved
    Nov 04 21:59:09 arch kernel: BIOS-e820: [mem 0x00000000ffe00000-0x00000000ffffffff] reserved
    Nov 04 21:59:09 arch kernel: NX (Execute Disable) protection: active
    Nov 04 21:59:09 arch kernel: SMBIOS 2.4 present.
    Nov 04 21:59:09 arch kernel: DMI: /DG31PR, BIOS PRG3110H.86A.0071.2010.0318.1704 03/18/2010
    Nov 04 21:59:09 arch kernel: e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
    Nov 04 21:59:09 arch kernel: e820: remove [mem 0x000a0000-0x000fffff] usable
    Nov 04 21:59:09 arch kernel: No AGP bridge found
    Nov 04 21:59:09 arch kernel: e820: last_pfn = 0x7ff00 max_arch_pfn = 0x400000000
    Nov 04 21:59:09 arch kernel: MTRR default type: uncachable
    Nov 04 21:59:09 arch kernel: MTRR fixed ranges enabled:
    Nov 04 21:59:09 arch kernel: 00000-9FFFF write-back
    Nov 04 21:59:09 arch kernel: A0000-E7FFF uncachable
    Nov 04 21:59:09 arch kernel: E8000-FFFFF write-protect
    Nov 04 21:59:09 arch kernel: MTRR variable ranges enabled:
    Nov 04 21:59:09 arch kernel: 0 base 000000000 mask F80000000 write-back
    Nov 04 21:59:09 arch kernel: 1 base 07FF00000 mask FFFF00000 uncachable
    Nov 04 21:59:09 arch kernel: 2 disabled
    Nov 04 21:59:09 arch kernel: 3 disabled
    Nov 04 21:59:09 arch kernel: 4 disabled
    Nov 04 21:59:09 arch kernel: 5 disabled
    Nov 04 21:59:09 arch kernel: 6 disabled
    Nov 04 21:59:09 arch kernel: 7 disabled
    Nov 04 21:59:09 arch kernel: x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
    Nov 04 21:59:09 arch kernel: found SMP MP-table at [mem 0x000fc620-0x000fc62f] mapped at [ffff8800000fc620]
    Nov 04 21:59:09 arch kernel: Scanning 1 areas for low memory corruption
    Nov 04 21:59:09 arch kernel: Base memory trampoline at [ffff880000099000] 99000 size 24576
    Nov 04 21:59:09 arch kernel: init_memory_mapping: [mem 0x00000000-0x000fffff]
    Nov 04 21:59:09 arch kernel: [mem 0x00000000-0x000fffff] page 4k
    Nov 04 21:59:09 arch kernel: BRK [0x01b2f000, 0x01b2ffff] PGTABLE
    Nov 04 21:59:09 arch kernel: BRK [0x01b30000, 0x01b30fff] PGTABLE
    Nov 04 21:59:09 arch kernel: BRK [0x01b31000, 0x01b31fff] PGTABLE
    Nov 04 21:59:09 arch kernel: init_memory_mapping: [mem 0x7f800000-0x7f9fffff]
    Nov 04 21:59:09 arch kernel: [mem 0x7f800000-0x7f9fffff] page 2M
    Nov 04 21:59:09 arch kernel: BRK [0x01b32000, 0x01b32fff] PGTABLE
    Nov 04 21:59:09 arch kernel: init_memory_mapping: [mem 0x7c000000-0x7f7fffff]
    Nov 04 21:59:09 arch kernel: [mem 0x7c000000-0x7f7fffff] page 2M
    Nov 04 21:59:09 arch kernel: init_memory_mapping: [mem 0x00100000-0x7bffffff]
    Nov 04 21:59:09 arch kernel: [mem 0x00100000-0x001fffff] page 4k
    Nov 04 21:59:09 arch kernel: [mem 0x00200000-0x7bffffff] page 2M
    Nov 04 21:59:09 arch kernel: init_memory_mapping: [mem 0x7fa00000-0x7fbb4fff]
    Nov 04 21:59:09 arch kernel: [mem 0x7fa00000-0x7fbb4fff] page 4k
    Nov 04 21:59:09 arch kernel: BRK [0x01b33000, 0x01b33fff] PGTABLE
    Nov 04 21:59:09 arch kernel: init_memory_mapping: [mem 0x7fd6b000-0x7fefffff]
    Nov 04 21:59:09 arch kernel: [mem 0x7fd6b000-0x7fefffff] page 4k
    Nov 04 21:59:09 arch kernel: BRK [0x01b34000, 0x01b34fff] PGTABLE
    Nov 04 21:59:09 arch kernel: RAMDISK: [mem 0x37a14000-0x37d01fff]
    Nov 04 21:59:09 arch kernel: ACPI: RSDP 00000000000f03f0 00024 (v02 INTEL)
    Nov 04 21:59:09 arch kernel: ACPI: XSDT 000000007fd53f10 00044 (v01 INTEL DG31PR 06222004 MSFT 00010013)
    Nov 04 21:59:09 arch kernel: ACPI: FACP 000000007fd51d90 000F4 (v04 INTEL DG31PR 06222004 MSFT 00010013)
    Nov 04 21:59:09 arch kernel: ACPI Warning: 32/64 FACS address mismatch in FADT - two FACS tables! (20130517/tbfadt-395)
    Nov 04 21:59:09 arch kernel: ACPI BIOS Warning (bug): 32/64X FACS address mismatch in FADT - 0x7FD56F40/0x000000007FD52F40, using 32 (20130517/tbfadt-522)
    Nov 04 21:59:09 arch kernel: ACPI: DSDT 000000007fd4c010 04BE9 (v01 INTEL DG31PR 00000000 INTL 20051117)
    Nov 04 21:59:09 arch kernel: ACPI: FACS 000000007fd56f40 00040
    Nov 04 21:59:09 arch kernel: ACPI: APIC 000000007fd51f10 0006C (v02 INTEL DG31PR 06222004 MSFT 00010013)
    Nov 04 21:59:09 arch kernel: ACPI: HPET 000000007fd5ad10 00038 (v01 INTEL ICH7HPET 06222004 AMI. 00000001)
    Nov 04 21:59:09 arch kernel: ACPI: MCFG 000000007fd5ac10 0003C (v01 INTEL DG31PR 06222004 MSFT 00000097)
    Nov 04 21:59:09 arch kernel: ACPI: Local APIC address 0xfee00000
    Nov 04 21:59:09 arch kernel: No NUMA configuration found
    Nov 04 21:59:09 arch kernel: Faking a node at [mem 0x0000000000000000-0x000000007fefffff]
    Nov 04 21:59:09 arch kernel: Initmem setup node 0 [mem 0x00000000-0x7fefffff]
    Nov 04 21:59:09 arch kernel: NODE_DATA [mem 0x7fefb000-0x7fefffff]
    Nov 04 21:59:09 arch kernel: [ffffea0000000000-ffffea0001ffffff] PMD -> [ffff88007d200000-ffff88007f1fffff] on node 0
    Nov 04 21:59:09 arch kernel: Zone ranges:
    Nov 04 21:59:09 arch kernel: DMA [mem 0x00001000-0x00ffffff]
    Nov 04 21:59:09 arch kernel: DMA32 [mem 0x01000000-0xffffffff]
    Nov 04 21:59:09 arch kernel: Normal empty
    Nov 04 21:59:09 arch kernel: Movable zone start for each node
    Nov 04 21:59:09 arch kernel: Early memory node ranges
    Nov 04 21:59:09 arch kernel: node 0: [mem 0x00001000-0x0009efff]
    Nov 04 21:59:09 arch kernel: node 0: [mem 0x00100000-0x7fbb4fff]
    Nov 04 21:59:09 arch kernel: node 0: [mem 0x7fd6b000-0x7fefffff]
    Nov 04 21:59:09 arch kernel: On node 0 totalpages: 523496
    Nov 04 21:59:09 arch kernel: DMA zone: 64 pages used for memmap
    Nov 04 21:59:09 arch kernel: DMA zone: 21 pages reserved
    Nov 04 21:59:09 arch kernel: DMA zone: 3998 pages, LIFO batch:0
    Nov 04 21:59:09 arch kernel: DMA32 zone: 8124 pages used for memmap
    Nov 04 21:59:09 arch kernel: DMA32 zone: 519498 pages, LIFO batch:31
    Nov 04 21:59:09 arch kernel: ACPI: PM-Timer IO Port: 0x408
    Nov 04 21:59:09 arch kernel: ACPI: Local APIC address 0xfee00000
    Nov 04 21:59:09 arch kernel: ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
    Nov 04 21:59:09 arch kernel: ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
    Nov 04 21:59:09 arch kernel: ACPI: LAPIC (acpi_id[0x03] lapic_id[0x02] enabled)
    Nov 04 21:59:09 arch kernel: ACPI: LAPIC (acpi_id[0x04] lapic_id[0x03] enabled)
    Nov 04 21:59:09 arch kernel: ACPI: IOAPIC (id[0x00] address[0xfec00000] gsi_base[0])
    Nov 04 21:59:09 arch kernel: IOAPIC[0]: apic_id 0, version 32, address 0xfec00000, GSI 0-23
    Nov 04 21:59:09 arch kernel: ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
    Nov 04 21:59:09 arch kernel: ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
    Nov 04 21:59:09 arch kernel: ACPI: IRQ0 used by override.
    Nov 04 21:59:09 arch kernel: ACPI: IRQ2 used by override.
    Nov 04 21:59:09 arch kernel: ACPI: IRQ9 used by override.
    Nov 04 21:59:09 arch kernel: Using ACPI (MADT) for SMP configuration information
    Nov 04 21:59:09 arch kernel: ACPI: HPET id: 0x8086a201 base: 0xfed00000
    Nov 04 21:59:09 arch kernel: smpboot: Allowing 4 CPUs, 0 hotplug CPUs
    Nov 04 21:59:09 arch kernel: nr_irqs_gsi: 40
    Nov 04 21:59:09 arch kernel: PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff]
    Nov 04 21:59:09 arch kernel: PM: Registered nosave memory: [mem 0x000a0000-0x000dffff]
    Nov 04 21:59:09 arch kernel: PM: Registered nosave memory: [mem 0x000e0000-0x000fffff]
    Nov 04 21:59:09 arch kernel: PM: Registered nosave memory: [mem 0x7fbb5000-0x7fbf7fff]
    Nov 04 21:59:09 arch kernel: PM: Registered nosave memory: [mem 0x7fbf8000-0x7fd4bfff]
    Nov 04 21:59:09 arch kernel: PM: Registered nosave memory: [mem 0x7fd4c000-0x7fd51fff]
    Nov 04 21:59:09 arch kernel: PM: Registered nosave memory: [mem 0x7fd52000-0x7fd52fff]
    Nov 04 21:59:09 arch kernel: PM: Registered nosave memory: [mem 0x7fd53000-0x7fd54fff]
    Nov 04 21:59:09 arch kernel: PM: Registered nosave memory: [mem 0x7fd55000-0x7fd56fff]
    Nov 04 21:59:09 arch kernel: PM: Registered nosave memory: [mem 0x7fd57000-0x7fd57fff]
    Nov 04 21:59:09 arch kernel: PM: Registered nosave memory: [mem 0x7fd58000-0x7fd5bfff]
    Nov 04 21:59:09 arch kernel: PM: Registered nosave memory: [mem 0x7fd5c000-0x7fd6afff]
    Nov 04 21:59:09 arch kernel: e820: [mem 0x7ff00000-0xfed1bfff] available for PCI devices
    Nov 04 21:59:09 arch kernel: Booting paravirtualized kernel on bare hardware
    Nov 04 21:59:09 arch kernel: setup_percpu: NR_CPUS:128 nr_cpumask_bits:128 nr_cpu_ids:4 nr_node_ids:1
    Nov 04 21:59:09 arch kernel: PERCPU: Embedded 29 pages/cpu @ffff88007f800000 s86528 r8192 d24064 u524288
    Nov 04 21:59:09 arch kernel: pcpu-alloc: s86528 r8192 d24064 u524288 alloc=1*2097152
    Nov 04 21:59:09 arch kernel: pcpu-alloc: [0] 0 1 2 3
    Nov 04 21:59:09 arch kernel: Built 1 zonelists in Node order, mobility grouping on. Total pages: 515287
    Nov 04 21:59:09 arch kernel: Policy zone: DMA32
    Nov 04 21:59:09 arch kernel: Kernel command line: BOOT_IMAGE=/boot/vmlinuz-linux root=UUID=17d019be-e01f-4c1c-ac50-69e1f3dc0592 rw quiet 3
    Nov 04 21:59:09 arch kernel: PID hash table entries: 4096 (order: 3, 32768 bytes)
    Nov 04 21:59:09 arch kernel: Checking aperture...
    Nov 04 21:59:09 arch kernel: No AGP bridge found
    Nov 04 21:59:09 arch kernel: Calgary: detecting Calgary via BIOS EBDA area
    Nov 04 21:59:09 arch kernel: Calgary: Unable to locate Rio Grande table in EBDA - bailing!
    Nov 04 21:59:09 arch kernel: Memory: 2045916K/2093984K available (5050K kernel code, 799K rwdata, 1696K rodata, 1140K init, 1288K bss, 48068K reserved)
    Nov 04 21:59:09 arch kernel: SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
    Nov 04 21:59:09 arch kernel: Preemptible hierarchical RCU implementation.
    Nov 04 21:59:09 arch kernel: RCU dyntick-idle grace-period acceleration is enabled.
    Nov 04 21:59:09 arch kernel: Dump stacks of tasks blocking RCU-preempt GP.
    Nov 04 21:59:09 arch kernel: RCU restricting CPUs from NR_CPUS=128 to nr_cpu_ids=4.
    Nov 04 21:59:09 arch kernel: NR_IRQS:8448 nr_irqs:712 16
    Nov 04 21:59:09 arch kernel: Console: colour dummy device 80x25
    Nov 04 21:59:09 arch kernel: console [tty0] enabled
    Nov 04 21:59:09 arch kernel: allocated 8388608 bytes of page_cgroup
    Nov 04 21:59:09 arch kernel: please try 'cgroup_disable=memory' option if you don't want memory cgroups
    Nov 04 21:59:09 arch kernel: hpet clockevent registered
    Nov 04 21:59:09 arch kernel: tsc: Fast TSC calibration using PIT
    Nov 04 21:59:09 arch kernel: tsc: Detected 2399.803 MHz processor
    Nov 04 21:59:09 arch kernel: Calibrating delay loop (skipped), value calculated using timer frequency.. 4801.58 BogoMIPS (lpj=7999343)
    Nov 04 21:59:09 arch kernel: pid_max: default: 32768 minimum: 301
    Nov 04 21:59:09 arch kernel: Security Framework initialized
    Nov 04 21:59:09 arch kernel: AppArmor: AppArmor disabled by boot time parameter
    Nov 04 21:59:09 arch kernel: Yama: becoming mindful.
    Nov 04 21:59:09 arch kernel: Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes)
    Nov 04 21:59:09 arch kernel: Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes)
    Nov 04 21:59:09 arch kernel: Mount-cache hash table entries: 256
    Nov 04 21:59:09 arch kernel: Initializing cgroup subsys memory
    Nov 04 21:59:09 arch kernel: Initializing cgroup subsys devices
    Nov 04 21:59:09 arch kernel: Initializing cgroup subsys freezer
    Nov 04 21:59:09 arch kernel: Initializing cgroup subsys net_cls
    Nov 04 21:59:09 arch kernel: Initializing cgroup subsys blkio
    Nov 04 21:59:09 arch kernel: CPU: Physical Processor ID: 0
    Nov 04 21:59:09 arch kernel: CPU: Processor Core ID: 0
    Nov 04 21:59:09 arch kernel: mce: CPU supports 6 MCE banks
    Nov 04 21:59:09 arch kernel: CPU0: Thermal monitoring enabled (TM2)
    Nov 04 21:59:09 arch kernel: Last level iTLB entries: 4KB 128, 2MB 4, 4MB 4
    Last level dTLB entries: 4KB 256, 2MB 0, 4MB 32
    tlb_flushall_shift: -1
    Nov 04 21:59:09 arch kernel: Freeing SMP alternatives memory: 20K (ffffffff819e6000 - ffffffff819eb000)
    Nov 04 21:59:09 arch kernel: ACPI: Core revision 20130517
    Nov 04 21:59:09 arch kernel: ACPI: All ACPI Tables successfully acquired
    Nov 04 21:59:09 arch kernel: ftrace: allocating 20100 entries in 79 pages
    Nov 04 21:59:09 arch kernel: ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
    Nov 04 21:59:09 arch kernel: smpboot: CPU0: Intel(R) Core(TM)2 Quad CPU Q6600 @ 2.40GHz (fam: 06, model: 0f, stepping: 0b)
    Nov 04 21:59:09 arch kernel: Performance Events: PEBS fmt0+, 4-deep LBR, Core2 events, Intel PMU driver.
    Nov 04 21:59:09 arch kernel: perf_event_intel: PEBS disabled due to CPU errata
    Nov 04 21:59:09 arch kernel: ... version: 2
    Nov 04 21:59:09 arch kernel: ... bit width: 40
    Nov 04 21:59:09 arch kernel: ... generic registers: 2
    Nov 04 21:59:09 arch kernel: ... value mask: 000000ffffffffff
    Nov 04 21:59:09 arch kernel: ... max period: 000000007fffffff
    Nov 04 21:59:09 arch kernel: ... fixed-purpose events: 3
    Nov 04 21:59:09 arch kernel: ... event mask: 0000000700000003
    Nov 04 21:59:09 arch kernel: NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
    Nov 04 21:59:09 arch kernel: smpboot: Booting Node 0, Processors #1 #2 #3 OK
    Nov 04 21:59:09 arch kernel: Brought up 4 CPUs
    Nov 04 21:59:09 arch kernel: smpboot: Total of 4 processors activated (19206.35 BogoMIPS)
    Nov 04 21:59:09 arch kernel: devtmpfs: initialized
    Nov 04 21:59:09 arch kernel: PM: Registering ACPI NVS region [mem 0x7fbb5000-0x7fbf7fff] (274432 bytes)
    Nov 04 21:59:09 arch kernel: PM: Registering ACPI NVS region [mem 0x7fd52000-0x7fd52fff] (4096 bytes)
    Nov 04 21:59:09 arch kernel: PM: Registering ACPI NVS region [mem 0x7fd55000-0x7fd56fff] (8192 bytes)
    Nov 04 21:59:09 arch kernel: PM: Registering ACPI NVS region [mem 0x7fd58000-0x7fd5bfff] (16384 bytes)
    Nov 04 21:59:09 arch kernel: RTC time: 0:59:05, date: 11/05/13
    Nov 04 21:59:09 arch kernel: NET: Registered protocol family 16
    Nov 04 21:59:09 arch kernel: ACPI: bus type PCI registered
    Nov 04 21:59:09 arch kernel: acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
    Nov 04 21:59:09 arch kernel: PCI: MMCONFIG for domain 0000 [bus 00-40] at [mem 0xe0000000-0xe40fffff] (base 0xe0000000)
    Nov 04 21:59:09 arch kernel: PCI: not using MMCONFIG
    Nov 04 21:59:09 arch kernel: PCI: Using configuration type 1 for base access
    Nov 04 21:59:09 arch kernel: mtrr: your CPUs had inconsistent fixed MTRR settings
    Nov 04 21:59:09 arch kernel: mtrr: your CPUs had inconsistent variable MTRR settings
    Nov 04 21:59:09 arch kernel: mtrr: probably your BIOS does not setup all CPUs.
    Nov 04 21:59:09 arch kernel: mtrr: corrected configuration.
    Nov 04 21:59:09 arch kernel: bio: create slab <bio-0> at 0
    Nov 04 21:59:09 arch kernel: ACPI: Added _OSI(Module Device)
    Nov 04 21:59:09 arch kernel: ACPI: Added _OSI(Processor Device)
    Nov 04 21:59:09 arch kernel: ACPI: Added _OSI(3.0 _SCP Extensions)
    Nov 04 21:59:09 arch kernel: ACPI: Added _OSI(Processor Aggregator Device)
    Nov 04 21:59:09 arch kernel: ACPI: EC: Look up EC in DSDT
    Nov 04 21:59:09 arch kernel: ACPI: Executed 1 blocks of module-level executable AML code
    Nov 04 21:59:09 arch kernel: ACPI: SSDT 000000007fd56c10 002CC (v01 AMI IST 00000001 MSFT 03000001)
    Nov 04 21:59:09 arch kernel: ACPI: Dynamic OEM Table Load:
    Nov 04 21:59:09 arch kernel: ACPI: SSDT (null) 002CC (v01 AMI IST 00000001 MSFT 03000001)
    Nov 04 21:59:09 arch kernel: ACPI: Interpreter enabled
    Nov 04 21:59:09 arch kernel: ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20130517/hwxface-571)
    Nov 04 21:59:09 arch kernel: ACPI: (supports S0 S1 S3 S4 S5)
    Nov 04 21:59:09 arch kernel: ACPI: Using IOAPIC for interrupt routing
    Nov 04 21:59:09 arch kernel: PCI: MMCONFIG for domain 0000 [bus 00-40] at [mem 0xe0000000-0xe40fffff] (base 0xe0000000)
    Nov 04 21:59:09 arch kernel: PCI: MMCONFIG at [mem 0xe0000000-0xe40fffff] reserved in ACPI motherboard resources
    Nov 04 21:59:09 arch kernel: PCI: MMCONFIG for 0000 [bus00-1f] at [mem 0xe0000000-0xe1ffffff] (base 0xe0000000) (size reduced!)
    Nov 04 21:59:09 arch kernel: PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
    Nov 04 21:59:09 arch kernel: ACPI: No dock devices found.
    Nov 04 21:59:09 arch kernel: [Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored
    Nov 04 21:59:09 arch kernel: ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
    Nov 04 21:59:09 arch kernel: acpi PNP0A08:00: Requesting ACPI _OSC control (0x1d)
    Nov 04 21:59:09 arch kernel: acpi PNP0A08:00: ACPI _OSC control (0x1d) granted
    Nov 04 21:59:09 arch kernel: acpi PNP0A08:00: [Firmware Info]: MMCONFIG for domain 0000 [bus 00-1f] only partially covers this bridge
    Nov 04 21:59:09 arch kernel: PCI host bridge to bus 0000:00
    Nov 04 21:59:09 arch kernel: pci_bus 0000:00: root bus resource [bus 00-ff]
    Nov 04 21:59:09 arch kernel: pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7]
    Nov 04 21:59:09 arch kernel: pci_bus 0000:00: root bus resource [io 0x0d00-0xffff]
    Nov 04 21:59:09 arch kernel: pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
    Nov 04 21:59:09 arch kernel: pci_bus 0000:00: root bus resource [mem 0x80000000-0xffffffff]
    Nov 04 21:59:09 arch kernel: pci 0000:00:00.0: [8086:29c0] type 00 class 0x060000
    Nov 04 21:59:09 arch kernel: pci 0000:00:01.0: [8086:29c1] type 01 class 0x060400
    Nov 04 21:59:09 arch kernel: pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
    Nov 04 21:59:09 arch kernel: pci 0000:00:01.0: System wakeup disabled by ACPI
    Nov 04 21:59:09 arch kernel: pci 0000:00:1b.0: [8086:27d8] type 00 class 0x040300
    Nov 04 21:59:09 arch kernel: pci 0000:00:1b.0: reg 0x10: [mem 0xfb200000-0xfb203fff 64bit]
    Nov 04 21:59:09 arch kernel: pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
    Nov 04 21:59:09 arch kernel: pci 0000:00:1c.0: [8086:27d0] type 01 class 0x060400
    Nov 04 21:59:09 arch kernel: pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
    Nov 04 21:59:09 arch kernel: pci 0000:00:1c.0: System wakeup disabled by ACPI
    Nov 04 21:59:09 arch kernel: pci 0000:00:1c.1: [8086:27d2] type 01 class 0x060400
    Nov 04 21:59:09 arch kernel: pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
    Nov 04 21:59:09 arch kernel: pci 0000:00:1c.1: System wakeup disabled by ACPI
    Nov 04 21:59:09 arch kernel: pci 0000:00:1d.0: [8086:27c8] type 00 class 0x0c0300
    Nov 04 21:59:09 arch kernel: pci 0000:00:1d.0: reg 0x20: [io 0xf080-0xf09f]
    Nov 04 21:59:09 arch kernel: pci 0000:00:1d.0: System wakeup disabled by ACPI
    Nov 04 21:59:09 arch kernel: pci 0000:00:1d.1: [8086:27c9] type 00 class 0x0c0300
    Nov 04 21:59:09 arch kernel: pci 0000:00:1d.1: reg 0x20: [io 0xf060-0xf07f]
    Nov 04 21:59:09 arch kernel: pci 0000:00:1d.1: System wakeup disabled by ACPI
    Nov 04 21:59:09 arch kernel: pci 0000:00:1d.2: [8086:27ca] type 00 class 0x0c0300
    Nov 04 21:59:09 arch kernel: pci 0000:00:1d.2: reg 0x20: [io 0xf040-0xf05f]
    Nov 04 21:59:09 arch kernel: pci 0000:00:1d.2: System wakeup disabled by ACPI
    Nov 04 21:59:09 arch kernel: pci 0000:00:1d.3: [8086:27cb] type 00 class 0x0c0300
    Nov 04 21:59:09 arch kernel: pci 0000:00:1d.3: reg 0x20: [io 0xf020-0xf03f]
    Nov 04 21:59:09 arch kernel: pci 0000:00:1d.3: System wakeup disabled by ACPI
    Nov 04 21:59:09 arch kernel: pci 0000:00:1d.7: [8086:27cc] type 00 class 0x0c0320
    Nov 04 21:59:09 arch kernel: pci 0000:00:1d.7: reg 0x10: [mem 0xfb204000-0xfb2043ff]
    Nov 04 21:59:09 arch kernel: pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
    Nov 04 21:59:09 arch kernel: pci 0000:00:1d.7: System wakeup disabled by ACPI
    Nov 04 21:59:09 arch kernel: pci 0000:00:1e.0: [8086:244e] type 01 class 0x060401
    Nov 04 21:59:09 arch kernel: pci 0000:00:1e.0: System wakeup disabled by ACPI
    Nov 04 21:59:09 arch kernel: pci 0000:00:1f.0: [8086:27b8] type 00 class 0x060100
    Nov 04 21:59:09 arch kernel: pci 0000:00:1f.0: address space collision: [io 0x0400-0x047f] conflicts with ACPI CPU throttle [??? 0x00000410-0x00000415 flags 0x80000000]
    Nov 04 21:59:09 arch kernel: pci 0000:00:1f.0: quirk: [io 0x0500-0x053f] claimed by ICH6 GPIO
    Nov 04 21:59:09 arch kernel: pci 0000:00:1f.0: ICH7 LPC Generic IO decode 1 PIO at 0290 (mask 00ff)
    Nov 04 21:59:09 arch kernel: pci 0000:00:1f.1: [8086:27df] type 00 class 0x01018a
    Nov 04 21:59:09 arch kernel: pci 0000:00:1f.1: reg 0x10: [io 0xf130-0xf137]
    Nov 04 21:59:09 arch kernel: pci 0000:00:1f.1: reg 0x14: [io 0xf120-0xf123]
    Nov 04 21:59:09 arch kernel: pci 0000:00:1f.1: reg 0x18: [io 0xf110-0xf117]
    Nov 04 21:59:09 arch kernel: pci 0000:00:1f.1: reg 0x1c: [io 0xf100-0xf103]
    Nov 04 21:59:09 arch kernel: pci 0000:00:1f.1: reg 0x20: [io 0xf0f0-0xf0ff]
    Nov 04 21:59:09 arch kernel: pci 0000:00:1f.2: [8086:27c0] type 00 class 0x01018f
    Nov 04 21:59:09 arch kernel: pci 0000:00:1f.2: reg 0x10: [io 0xf0e0-0xf0e7]
    Nov 04 21:59:09 arch kernel: pci 0000:00:1f.2: reg 0x14: [io 0xf0d0-0xf0d3]
    Nov 04 21:59:09 arch kernel: pci 0000:00:1f.2: reg 0x18: [io 0xf0c0-0xf0c7]
    Nov 04 21:59:09 arch kernel: pci 0000:00:1f.2: reg 0x1c: [io 0xf0b0-0xf0b3]
    Nov 04 21:59:09 arch kernel: pci 0000:00:1f.2: reg 0x20: [io 0xf0a0-0xf0af]
    Nov 04 21:59:09 arch kernel: pci 0000:00:1f.2: PME# supported from D3hot
    Nov 04 21:59:09 arch kernel: pci 0000:00:1f.3: [8086:27da] type 00 class 0x0c0500
    Nov 04 21:59:09 arch kernel: pci 0000:00:1f.3: reg 0x20: [io 0xf000-0xf01f]
    Nov 04 21:59:09 arch kernel: pci 0000:01:00.0: [10de:0421] type 00 class 0x030000
    Nov 04 21:59:09 arch kernel: pci 0000:01:00.0: reg 0x10: [mem 0xfa000000-0xfaffffff]
    Nov 04 21:59:09 arch kernel: pci 0000:01:00.0: reg 0x14: [mem 0xd0000000-0xdfffffff 64bit pref]
    Nov 04 21:59:09 arch kernel: pci 0000:01:00.0: reg 0x1c: [mem 0xf8000000-0xf9ffffff 64bit]
    Nov 04 21:59:09 arch kernel: pci 0000:01:00.0: reg 0x24: [io 0xe000-0xe07f]
    Nov 04 21:59:09 arch kernel: pci 0000:01:00.0: reg 0x30: [mem 0xfb000000-0xfb01ffff pref]
    Nov 04 21:59:09 arch kernel: pci 0000:00:01.0: PCI bridge to [bus 01]
    Nov 04 21:59:09 arch kernel: pci 0000:00:01.0: bridge window [io 0xe000-0xefff]
    Nov 04 21:59:09 arch kernel: pci 0000:00:01.0: bridge window [mem 0xf8000000-0xfb0fffff]
    Nov 04 21:59:09 arch kernel: pci 0000:00:01.0: bridge window [mem 0xd0000000-0xdfffffff 64bit pref]
    Nov 04 21:59:09 arch kernel: pci 0000:00:1c.0: PCI bridge to [bus 02]
    Nov 04 21:59:09 arch kernel: pci 0000:03:00.0: [10ec:8168] type 00 class 0x020000
    Nov 04 21:59:09 arch kernel: pci 0000:03:00.0: reg 0x10: [io 0xd000-0xd0ff]
    Nov 04 21:59:09 arch kernel: pci 0000:03:00.0: reg 0x18: [mem 0xfb120000-0xfb120fff 64bit]
    Nov 04 21:59:09 arch kernel: pci 0000:03:00.0: reg 0x30: [mem 0xfb100000-0xfb11ffff pref]
    Nov 04 21:59:09 arch kernel: pci 0000:03:00.0: supports D1 D2
    Nov 04 21:59:09 arch kernel: pci 0000:03:00.0: PME# supported from D1 D2 D3hot D3cold
    Nov 04 21:59:09 arch kernel: pci 0000:03:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force'
    Nov 04 21:59:09 arch kernel: pci 0000:00:1c.1: PCI bridge to [bus 03]
    Nov 04 21:59:09 arch kernel: pci 0000:00:1c.1: bridge window [io 0xd000-0xdfff]
    Nov 04 21:59:09 arch kernel: pci 0000:00:1c.1: bridge window [mem 0xfb100000-0xfb1fffff]
    Nov 04 21:59:09 arch kernel: pci 0000:00:1e.0: PCI bridge to [bus 04] (subtractive decode)
    Nov 04 21:59:09 arch kernel: pci 0000:00:1e.0: bridge window [io 0x0000-0x0cf7] (subtractive decode)
    Nov 04 21:59:09 arch kernel: pci 0000:00:1e.0: bridge window [io 0x0d00-0xffff] (subtractive decode)
    Nov 04 21:59:09 arch kernel: pci 0000:00:1e.0: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
    Nov 04 21:59:09 arch kernel: pci 0000:00:1e.0: bridge window [mem 0x80000000-0xffffffff] (subtractive decode)
    Nov 04 21:59:09 arch kernel: ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 *11 12 14 15)
    Nov 04 21:59:09 arch kernel: ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 *10 11 12 14 15)
    Nov 04 21:59:09 arch kernel: ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 *7 10 11 12 14 15)
    Nov 04 21:59:09 arch kernel: ACPI: PCI Interrupt Link [LNKD] (IRQs *3 4 5 6 10 11 12 14 15)
    Nov 04 21:59:09 arch kernel: ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11 12 14 15) *0
    Nov 04 21:59:09 arch kernel: ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11 12 14 15) *0
    Nov 04 21:59:09 arch kernel: ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 10 11 12 14 15) *0
    Nov 04 21:59:09 arch kernel: ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 *5 6 7 10 11 12 14 15)
    Nov 04 21:59:09 arch kernel: ACPI: Enabled 3 GPEs in block 00 to 1F
    Nov 04 21:59:09 arch kernel: ACPI: \_SB_.PCI0: notify handler is installed
    Nov 04 21:59:09 arch kernel: Found 1 acpi root devices
    Nov 04 21:59:09 arch kernel: vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
    Nov 04 21:59:09 arch kernel: vgaarb: loaded
    Nov 04 21:59:09 arch kernel: vgaarb: bridge control possible 0000:01:00.0
    Nov 04 21:59:09 arch kernel: PCI: Using ACPI for IRQ routing
    Nov 04 21:59:09 arch kernel: PCI: pci_cache_line_size set to 64 bytes
    Nov 04 21:59:09 arch kernel: e820: reserve RAM buffer [mem 0x0009fc00-0x0009ffff]
    Nov 04 21:59:09 arch kernel: e820: reserve RAM buffer [mem 0x7fbb5000-0x7fffffff]
    Nov 04 21:59:09 arch kernel: e820: reserve RAM buffer [mem 0x7ff00000-0x7fffffff]
    Nov 04 21:59:09 arch kernel: NetLabel: Initializing
    Nov 04 21:59:09 arch kernel: NetLabel: domain hash size = 128
    Nov 04 21:59:09 arch kernel: NetLabel: protocols = UNLABELED CIPSOv4
    Nov 04 21:59:09 arch kernel: NetLabel: unlabeled traffic allowed by default
    Nov 04 21:59:09 arch kernel: HPET: 3 timers in total, 0 timers will be used for per-cpu timer
    Nov 04 21:59:09 arch kernel: hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
    Nov 04 21:59:09 arch kernel: hpet0: 3 comparators, 64-bit 14.318180 MHz counter
    Nov 04 21:59:09 arch kernel: Switched to clocksource hpet
    Nov 04 21:59:09 arch kernel: pnp: PnP ACPI init
    Nov 04 21:59:09 arch kernel: ACPI: bus type PNP registered
    Nov 04 21:59:09 arch kernel: system 00:00: [mem 0xfed14000-0xfed19fff] has been reserved
    Nov 04 21:59:09 arch kernel: system 00:00: [mem 0xe0000000-0xe3ffffff] has been reserved
    Nov 04 21:59:09 arch kernel: system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active)
    Nov 04 21:59:09 arch kernel: system 00:01: [io 0x0400-0x047f] could not be reserved
    Nov 04 21:59:09 arch kernel: system 00:01: [io 0x1180-0x119f] has been reserved
    Nov 04 21:59:09 arch kernel: system 00:01: [io 0x0500-0x053f] has been reserved
    Nov 04 21:59:09 arch kernel: system 00:01: [mem 0xfec00000-0xfecfffff] could not be reserved
    Nov 04 21:59:09 arch kernel: system 00:01: [mem 0xfee00000-0xfee0ffff] has been reserved
    Nov 04 21:59:09 arch kernel: system 00:01: [mem 0xfed1c000-0xfed1ffff] has been reserved
    Nov 04 21:59:09 arch kernel: system 00:01: [mem 0xffb00000-0xffcfffff] could not be reserved
    Nov 04 21:59:09 arch kernel: system 00:01: [mem 0xfc800000-0xfc800fff] has been reserved
    Nov 04 21:59:09 arch kernel: system 00:01: [mem 0xfed20000-0xfed7ffff] has been reserved
    Nov 04 21:59:09 arch kernel: system 00:01: [mem 0xffe00000-0xffffffff] has been reserved
    Nov 04 21:59:09 arch kernel: system 00:01: Plug and Play ACPI device, IDs PNP0c01 (active)
    Nov 04 21:59:09 arch kernel: system 00:02: [io 0x0290-0x029f] has been reserved
    Nov 04 21:59:09 arch kernel: system 00:02: Plug and Play ACPI device, IDs PNP0c02 (active)
    Nov 04 21:59:09 arch kernel: pnp 00:03: Plug and Play ACPI device, IDs PNP0f03 PNP0f13 (active)
    Nov 04 21:59:09 arch kernel: pnp 00:04: [dma 2]
    Nov 04 21:59:09 arch kernel: pnp 00:04: Plug and Play ACPI device, IDs PNP0700 (active)
    Nov 04 21:59:09 arch kernel: pnp 00:05: [dma 0 disabled]
    Nov 04 21:59:09 arch kernel: pnp 00:05: Plug and Play ACPI device, IDs PNP0501 (active)
    Nov 04 21:59:09 arch kernel: pnp 00:06: [dma 4]
    Nov 04 21:59:09 arch kernel: pnp 00:06: Plug and Play ACPI device, IDs PNP0200 (active)
    Nov 04 21:59:09 arch kernel: pnp 00:07: Plug and Play ACPI device, IDs PNP0b00 (active)
    Nov 04 21:59:09 arch kernel: pnp 00:08: Plug and Play ACPI device, IDs PNP0800 (active)
    Nov 04 21:59:09 arch kernel: system 00:09: [io 0x04d0-0x04d1] has been reserved
    Nov 04 21:59:09 arch kernel: system 00:09: Plug and Play ACPI device, IDs PNP0c02 (active)
    Nov 04 21:59:09 arch kernel: pnp 00:0a: Plug and Play ACPI device, IDs PNP0c04 (active)
    Nov 04 21:59:09 arch kernel: pnp 00:0b: Plug and Play ACPI device, IDs PNP0103 (active)
    Nov 04 21:59:09 arch kernel: pnp: PnP ACPI: found 12 devices
    Nov 04 21:59:09 arch kernel: ACPI: bus type PNP unregistered
    Nov 04 21:59:09 arch kernel: pci 0000:00:1c.0: bridge window [io 0x1000-0x0fff] to [bus 02] add_size 1000
    Nov 04 21:59:09 arch kernel: pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 02] add_size 200000
    Nov 04 21:59:09 arch kernel: pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff] to [bus 02] add_size 200000
    Nov 04 21:59:09 arch kernel: pci 0000:00:1c.1: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 03] add_size 200000
    Nov 04 21:59:09 arch kernel: pci 0000:00:1f.0: BAR 13: [io 0x0400-0x047f] has bogus alignment
    Nov 04 21:59:09 arch kernel: pci 0000:00:1c.0: res[14]=[mem 0x00100000-0x000fffff] get_res_add_size add_size 200000
    Nov 04 21:59:09 arch kernel: pci 0000:00:1c.0: res[15]=[mem 0x00100000-0x000fffff 64bit pref] get_res_add_size add_size 200000
    Nov 04 21:59:09 arch kernel: pci 0000:00:1c.1: res[15]=[mem 0x00100000-0x000fffff 64bit pref] get_res_add_size add_size 200000
    Nov 04 21:59:09 arch kernel: pci 0000:00:1c.0: res[13]=[io 0x1000-0x0fff] get_res_add_size add_size 1000
    Nov 04 21:59:09 arch kernel: pci 0000:00:1c.0: BAR 14: assigned [mem 0x80000000-0x801fffff]
    Nov 04 21:59:09 arch kernel: pci 0000:00:1c.0: BAR 15: assigned [mem 0x80200000-0x803fffff 64bit pref]
    Nov 04 21:59:09 arch kernel: pci 0000:00:1c.1: BAR 15: assigned [mem 0x80400000-0x805fffff 64bit pref]
    Nov 04 21:59:09 arch kernel: pci 0000:00:1c.0: BAR 13: assigned [io 0x2000-0x2fff]
    Nov 04 21:59:09 arch kernel: pci 0000:00:01.0: PCI bridge to [bus 01]
    Nov 04 21:59:09 arch kernel: pci 0000:00:01.0: bridge window [io 0xe000-0xefff]
    Nov 04 21:59:09 arch kernel: pci 0000:00:01.0: bridge window [mem 0xf8000000-0xfb0fffff]
    Nov 04 21:59:09 arch kernel: pci 0000:00:01.0: bridge window [mem 0xd0000000-0xdfffffff 64bit pref]
    Nov 04 21:59:09 arch kernel: pci 0000:00:1c.0: PCI bridge to [bus 02]
    Nov 04 21:59:09 arch kernel: pci 0000:00:1c.0: bridge window [io 0x2000-0x2fff]
    Nov 04 21:59:09 arch kernel: pci 0000:00:1c.0: bridge window [mem 0x80000000-0x801fffff]
    Nov 04 21:59:09 arch kernel: pci 0000:00:1c.0: bridge window [mem 0x80200000-0x803fffff 64bit pref]
    Nov 04 21:59:09 arch kernel: pci 0000:00:1c.1: PCI bridge to [bus 03]
    Nov 04 21:59:09 arch kernel: pci 0000:00:1c.1: bridge window [io 0xd000-0xdfff]
    Nov 04 21:59:09 arch kernel: pci 0000:00:1c.1: bridge window [mem 0xfb100000-0xfb1fffff]
    Nov 04 21:59:09 arch kernel: pci 0000:00:1c.1: bridge window [mem 0x80400000-0x805fffff 64bit pref]
    Nov 04 21:59:09 arch kernel: pci 0000:00:1e.0: PCI bridge to [bus 04]
    Nov 04 21:59:09 arch kernel: pci 0000:00:1e.0: setting latency timer to 64
    Nov 04 21:59:09 arch kernel: pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
    Nov 04 21:59:09 arch kernel: pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
    Nov 04 21:59:09 arch kernel: pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
    Nov 04 21:59:09 arch kernel: pci_bus 0000:00: resource 7 [mem 0x80000000-0xffffffff]
    Nov 04 21:59:09 arch kernel: pci_bus 0000:01: resource 0 [io 0xe000-0xefff]
    Nov 04 21:59:09 arch kernel: pci_bus 0000:01: resource 1 [mem 0xf8000000-0xfb0fffff]
    Nov 04 21:59:09 arch kernel: pci_bus 0000:01: resource 2 [mem 0xd0000000-0xdfffffff 64bit pref]
    Nov 04 21:59:09 arch kernel: pci_bus 0000:02: resource 0 [io 0x2000-0x2fff]
    Nov 04 21:59:09 arch kernel: pci_bus 0000:02: resource 1 [mem 0x80000000-0x801fffff]
    Nov 04 21:59:09 arch kernel: pci_bus 0000:02: resource 2 [mem 0x80200000-0x803fffff 64bit pref]
    Nov 04 21:59:09 arch kernel: pci_bus 0000:03: resource 0 [io 0xd000-0xdfff]
    Nov 04 21:59:09 arch kernel: pci_bus 0000:03: resource 1 [mem 0xfb100000-0xfb1fffff]
    Nov 04 21:59:09 arch kernel: pci_bus 0000:03: resource 2 [mem 0x80400000-0x805fffff 64bit pref]
    Nov 04 21:59:09 arch kernel: pci_bus 0000:04: resource 4 [io 0x0000-0x0cf7]
    Nov 04 21:59:09 arch kernel: pci_bus 0000:04: resource 5 [io 0x0d00-0xffff]
    Nov 04 21:59:09 arch kernel: pci_bus 0000:04: resource 6 [mem 0x000a0000-0x000bffff]
    Nov 04 21:59:09 arch kernel: pci_bus 0000:04: resource 7 [mem 0x80000000-0xffffffff]
    Nov 04 21:59:09 arch kernel: NET: Registered protocol family 2
    Nov 04 21:59:09 arch kernel: TCP established hash table entries: 16384 (order: 6, 262144 bytes)
    Nov 04 21:59:09 arch kernel: TCP bind hash table entries: 16384 (order: 6, 262144 bytes)
    Nov 04 21:59:09 arch kernel: TCP: Hash tables configured (established 16384 bind 16384)
    Nov 04 21:59:09 arch kernel: TCP: reno registered
    Nov 04 21:59:09 arch kernel: UDP hash table entries: 1024 (order: 3, 32768 bytes)
    Nov 04 21:59:09 arch kernel: UDP-Lite hash table entries: 1024 (order: 3, 32768 bytes)
    Nov 04 21:59:09 arch kernel: NET: Registered protocol family 1
    Nov 04 21:59:09 arch kernel: pci 0000:00:1d.7: EHCI: BIOS handoff failed (BIOS bug?) 01010001
    Nov 04 21:59:09 arch kernel: pci 0000:01:00.0: Boot video device
    Nov 04 21:59:09 arch kernel: PCI: CLS 64 bytes, default 64
    Nov 04 21:59:09 arch kernel: Unpacking initramfs...
    Nov 04 21:59:09 arch kernel: Freeing initrd memory: 3000K (ffff880037a14000 - ffff880037d02000)
    Nov 04 21:59:09 arch kernel: Scanning for low memory corruption every 60 seconds
    Nov 04 21:59:09 arch kernel: audit: initializing netlink socket (disabled)
    Nov 04 21:59:09 arch kernel: type=2000 audit(1383613146.559:1): initialized
    Nov 04 21:59:09 arch kernel: HugeTLB registered 2 MB page size, pre-allocated 0 pages
    Nov 04 21:59:09 arch kernel: zbud: loaded
    Nov 04 21:59:09 arch kernel: VFS: Disk quotas dquot_6.5.2
    Nov 04 21:59:09 arch kernel: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
    Nov 04 21:59:09 arch kernel: msgmni has been set to 4001
    Nov 04 21:59:09 arch kernel: Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
    Nov 04 21:59:09 arch kernel: io scheduler noop registered
    Nov 04 21:59:09 arch kernel: io scheduler deadline registered
    Nov 04 21:59:09 arch kernel: io scheduler cfq registered (default)
    Nov 04 21:59:09 arch kernel: pcieport 0000:00:01.0: irq 40 for MSI/MSI-X
    Nov 04 21:59:09 arch kernel: pcieport 0000:00:1c.0: irq 41 for MSI/MSI-X
    Nov 04 21:59:09 arch kernel: pcieport 0000:00:1c.1: irq 42 for MSI/MSI-X
    Nov 04 21:59:09 arch kernel: pcieport 0000:00:01.0: Signaling PME through PCIe PME interrupt
    Nov 04 21:59:09 arch kernel: pci 0000:01:00.0: Signaling PME through PCIe PME interrupt
    Nov 04 21:59:09 arch kernel: pcie_pme 0000:00:01.0:pcie01: service driver pcie_pme loaded
    Nov 04 21:59:09 arch kernel: pcieport 0000:00:1c.0: Signaling PME through PCIe PME interrupt
    Nov 04 21:59:09 arch kernel: pcie_pme 0000:00:1c.0:pcie01: service driver pcie_pme loaded
    Nov 04 21:59:09 arch kernel: pcieport 0000:00:1c.1: Signaling PME through PCIe PME interrupt
    Nov 04 21:59:09 arch kernel: pci 0000:03:00.0: Signaling PME through PCIe PME interrupt
    Nov 04 21:59:09 arch kernel: pcie_pme 0000:00:1c.1:pcie01: service driver pcie_pme loaded
    Nov 04 21:59:09 arch kernel: pci_hotplug: PCI Hot Plug PCI Core version: 0.5
    Nov 04 21:59:09 arch kernel: pciehp 0000:00:1c.0:pcie04: HPC vendor_id 8086 device_id 27d0 ss_vid 8086 ss_did 27d0
    Nov 04 21:59:09 arch kernel: pciehp 0000:00:1c.0:pcie04: service driver pciehp loaded
    Nov 04 21:59:09 arch kernel: pciehp 0000:00:1c.1:pcie04: HPC vendor_id 8086 device_id 27d2 ss_vid 8086 ss_did 27d2
    Nov 04 21:59:09 arch kernel: pciehp 0000:00:1c.1:pcie04: service driver pciehp loaded
    Nov 04 21:59:09 arch kernel: pciehp: PCI Express Hot Plug Controller Driver version: 0.4
    Nov 04 21:59:09 arch kernel: vesafb: mode is 640x480x32, linelength=2560, pages=0
    Nov 04 21:59:09 arch kernel: vesafb: scrolling: redraw
    Nov 04 21:59:09 arch kernel: vesafb: Truecolor: size=8:8:8:8, shift=24:16:8:0
    Nov 04 21:59:09 arch kernel: vesafb: framebuffer at 0xf9000000, mapped to 0xffffc90002400000, using 1216k, total 1216k
    Nov 04 21:59:09 arch kernel: Console: switching to colour frame buffer device 80x30
    Nov 04 21:59:09 arch kernel: fb0: VESA VGA frame buffer device
    Nov 04 21:59:09 arch kernel: intel_idle: does not run on family 6 model 15
    Nov 04 21:59:09 arch kernel: GHES: HEST is not enabled!
    Nov 04 21:59:09 arch kernel: Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
    Nov 04 21:59:09 arch kernel: 00:05: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
    Nov 04 21:59:09 arch kernel: Linux agpgart interface v0.103
    Nov 04 21:59:09 arch kernel: i8042: PNP: PS/2 Controller [PNP0f03:PS2M] at 0x60,0x64 irq 12
    Nov 04 21:59:09 arch kernel: i8042: PNP: PS/2 controller doesn't have KBD irq; using default 1
    Nov 04 21:59:09 arch kernel: serio: i8042 KBD port at 0x60,0x64 irq 1
    Nov 04 21:59:09 arch kernel: serio: i8042 AUX port at 0x60,0x64 irq 12
    Nov 04 21:59:09 arch kernel: mousedev: PS/2 mouse device common for all mice
    Nov 04 21:59:09 arch kernel: rtc_cmos 00:07: RTC can wake from S4
    Nov 04 21:59:09 arch kernel: rtc_cmos 00:07: rtc core: registered rtc_cmos as rtc0
    Nov 04 21:59:09 arch kernel: rtc_cmos 00:07: alarms up to one year, y3k, 114 bytes nvram, hpet irqs
    Nov 04 21:59:09 arch kernel: cpuidle: using governor ladder
    Nov 04 21:59:09 arch kernel: cpuidle: using governor menu
    Nov 04 21:59:09 arch kernel: drop_monitor: Initializing network drop monitor service
    Nov 04 21:59:09 arch kernel: TCP: cubic registered
    Nov 04 21:59:09 arch kernel: NET: Registered protocol family 10
    Nov 04 21:59:09 arch kernel: NET: Registered protocol family 17
    Nov 04 21:59:09 arch kernel: Key type dns_resolver registered
    Nov 04 21:59:09 arch kernel: PM: Hibernation image not present or could not be loaded.
    Nov 04 21:59:09 arch kernel: registered taskstats version 1
    Nov 04 21:59:09 arch kernel: Magic number: 5:843:960
    Nov 04 21:59:09 arch kernel: memory memory11: hash matches
    Nov 04 21:59:09 arch kernel: rtc_cmos 00:07: setting system clock to 2013-11-05 00:59:07 UTC (1383613147)
    Nov 04 21:59:09 arch kernel: Freeing unused kernel memory: 1140K (ffffffff818c9000 - ffffffff819e6000)
    Nov 04 21:59:09 arch kernel: Write protecting the kernel read-only data: 8192k
    Nov 04 21:59:09 arch kernel: Freeing unused kernel memory: 1084K (ffff8800014f1000 - ffff880001600000)
    Nov 04 21:59:09 arch kernel: Freeing unused kernel memory: 352K (ffff8800017a8000 - ffff880001800000)
    Nov 04 21:59:09 arch systemd-udevd[58]: starting version 208
    Nov 04 21:59:09 arch kernel: Floppy drive(s): fd0 is 1.44M
    Nov 04 21:59:09 arch kernel: SCSI subsystem initialized
    Nov 04 21:59:09 arch kernel: ACPI: bus type USB registered
    Nov 04 21:59:09 arch kernel: usbcore: registered new interface driver usbfs
    Nov 04 21:59:09 arch kernel: usbcore: registered new interface driver hub
    Nov 04 21:59:09 arch kernel: usbcore: registered new device driver usb
    Nov 04 21:59:09 arch kernel: ACPI: bus type ATA registered
    Nov 04 21:59:09 arch kernel: ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
    Nov 04 21:59:09 arch kernel: uhci_hcd: USB Universal Host Controller Interface driver
    Nov 04 21:59:09 arch kernel: libata version 3.00 loaded.
    Nov 04 21:59:09 arch kernel: uhci_hcd 0000:00:1d.0: setting latency timer to 64
    Nov 04 21:59:09 arch kernel: uhci_hcd 0000:00:1d.0: UHCI Host Controller
    Nov 04 21:59:09 arch kernel: uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 1
    Nov 04 21:59:09 arch kernel: uhci_hcd 0000:00:1d.0: irq 23, io base 0x0000f080
    Nov 04 21:59:09 arch kernel: ehci-pci: EHCI PCI platform driver
    Nov 04 21:59:09 arch kernel: hub 1-0:1.0: USB hub found
    Nov 04 21:59:09 arch kernel: hub 1-0:1.0: 2 ports detected
    Nov 04 21:59:09 arch kernel: uhci_hcd 0000:00:1d.1: setting latency timer to 64
    Nov 04 21:59:09 arch kernel: uhci_hcd 0000:00:1d.1: UHCI Host Controller
    Nov 04 21:59:09 arch kernel: uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 2
    Nov 04 21:59:09 arch kernel: uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000f060
    Nov 04 21:59:09 arch kernel: hub 2-0:1.0: USB hub found
    Nov 04 21:59:09 arch kernel: hub 2-0:1.0: 2 ports detected
    Nov 04 21:59:09 arch kernel: uhci_hcd 0000:00:1d.2: setting latency timer to 64
    Nov 04 21:59:09 arch kernel: uhci_hcd 0000:00:1d.2: UHCI Host Controller
    Nov 04 21:59:09 arch kernel: uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 3
    Nov 04 21:59:09 arch kernel: uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000f040
    Nov 04 21:59:09 arch kernel: FDC 0 is a post-1991 82077
    Nov 04 21:59:09 arch kernel: hub 3-0:1.0: USB hub found
    Nov 04 21:59:09 arch kernel: hub 3-0:1.0: 2 ports detected
    Nov 04 21:59:09 arch kernel: uhci_hcd 0000:00:1d.3: setting latency timer to 64
    Nov 04 21:59:09 arch kernel: uhci_hcd 0000:00:1d.3: UHCI Host Controller
    Nov 04 21:59:09 arch kernel: uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 4
    Nov 04 21:59:09 arch kernel: uhci_hcd 0000:00:1d.3: irq 16, io base 0x0000f020
    Nov 04 21:59:09 arch kernel: hub 4-0:1.0: USB hub found
    Nov 04 21:59:09 arch kernel: hub 4-0:1.0: 2 ports detected
    Nov 04 21:59:09 arch kernel: ata_piix 0000:00:1f.1: version 2.13
    Nov 04 21:59:09 arch kernel: ata_piix 0000:00:1f.1: setting latency timer to 64
    Nov 04 21:59:09 arch kernel: scsi0 : ata_piix
    Nov 04 21:59:09 arch kernel: scsi1 : ata_piix
    Nov 04 21:59:09 arch kernel: ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0xf0f0 irq 14
    Nov 04 21:59:09 arch kernel: ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xf0f8 irq 15
    Nov 04 21:59:09 arch kernel: ata_piix 0000:00:1f.2: MAP [
    Nov 04 21:59:09 arch kernel: P0 P2 P1 P3 ]
    Nov 04 21:59:09 arch kernel: ata_piix 0000:00:1f.2: setting latency timer to 64
    Nov 04 21:59:09 arch kernel: ata2: port disabled--ignoring
    Nov 04 21:59:09 arch kernel: scsi2 : ata_piix
    Nov 04 21:59:09 arch kernel: scsi3 : ata_piix
    Nov 04 21:59:09 arch kernel: ata3: SATA max UDMA/133 cmd 0xf0e0 ctl 0xf0d0 bmdma 0xf0a0 irq 19
    Nov 04 21:59:09 arch kernel: ata4: SATA max UDMA/133 cmd 0xf0c0 ctl 0xf0b0 bmdma 0xf0a8 irq 19
    Nov 04 21:59:09 arch kernel: ehci-pci 0000:00:1d.7: setting latency timer to 64
    Nov 04 21:59:09 arch kernel: ehci-pci 0000:00:1d.7: EHCI Host Controller
    Nov 04 21:59:09 arch kernel: ehci-pci 0000:00:1d.7: new USB bus registered, assigned bus number 5
    Nov 04 21:59:09 arch kernel: ehci-pci 0000:00:1d.7: debug port 1
    Nov 04 21:59:09 arch kernel: ehci-pci 0000:00:1d.7: cache line size of 64 is not supported
    Nov 04 21:59:09 arch kernel: ehci-pci 0000:00:1d.7: irq 23, io mem 0xfb204000
    Nov 04 21:59:09 arch kernel: ehci-pci 0000:00:1d.7: USB 2.0 started, EHCI 1.00
    Nov 04 21:59:09 arch kernel: hub 5-0:1.0: USB hub found
    Nov 04 21:59:09 arch kernel: hub 5-0:1.0: 8 ports detected
    Nov 04 21:59:09 arch kernel: hub 1-0:1.0: USB hub found
    Nov 04 21:59:09 arch kernel: hub 1-0:1.0: 2 ports detected
    Nov 04 21:59:09 arch kernel: hub 2-0:1.0: USB hub found
    Nov 04 21:59:09 arch kernel: hub 2-0:1.0: 2 ports detected
    Nov 04 21:59:09 arch kernel: hub 3-0:1.0: USB hub found
    Nov 04 21:59:09 arch kernel: hub 3-0:1.0: 2 ports detected
    Nov 04 21:59:09 arch kernel: hub 4-0:1.0: USB hub found
    Nov 04 21:59:09 arch kernel: hub 4-0:1.0: 2 ports detected
    Nov 04 21:59:09 arch kernel: ata4.00: ATA-8: WDC WD10EZEX-00RKKA0, 80.00A80, max UDMA/133
    Nov 04 21:59:09 arch kernel: ata4.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 0/32)
    Nov 04 21:59:09 arch kernel: ata4.00: configured for UDMA/133
    Nov 04 21:59:09 arch kernel: scsi 3:0:0:0: Direct-Access ATA WDC WD10EZEX-00R 80.0 PQ: 0 ANSI: 5
    Nov 04 21:59:09 arch kernel: sd 3:0:0:0: [sda] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB)
    Nov 04 21:59:09 arch kernel: sd 3:0:0:0: [sda] 4096-byte physical blocks
    Nov 04 21:59:09 arch kernel: sd 3:0:0:0: [sda] Write Protect is off
    Nov 04 21:59:09 arch kernel: sd 3:0:0:0: [sda] Mode Sense: 00 3a 00 00
    Nov 04 21:59:09 arch kernel: sd 3:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
    Nov 04 21:59:09 arch kernel: sda: sda1 sda2 sda3 sda4 sda5
    Nov 04 21:59:09 arch kernel: sd 3:0:0:0: [sda] Attached SCSI disk
    Nov 04 21:59:09 arch kernel: usb 3-2: new full-speed USB device number 2 using uhci_hcd
    Nov 04 21:59:09 arch kernel: tsc: Refined TSC clocksource calibration: 2399.950 MHz
    Nov 04 21:59:09 arch kernel: EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
    Nov 04 21:59:09 arch systemd[1]: systemd 208 running in system mode. (+PAM -LIBWRAP -AUDIT -SELINUX -IMA -SYSVINIT +LIBCRYPTSETUP +GCRYPT +ACL +XZ)
    Nov 04 21:59:09 arch systemd[1]: Set hostname to <arch>.
    Nov 04 21:59:09 arch kernel: Switched to clocksource tsc
    Nov 04 21:59:09 arch systemd[1]: Failed to load default target: No such file or directory
    Nov 04 21:59:09 arch systemd[1]: Trying to load rescue target...
    Nov 04 21:59:09 arch systemd[1]: Starting Encrypted Volumes.
    Nov 04 21:59:09 arch systemd[1]: Reached target Encrypted Volumes.
    Nov 04 21:59:09 arch systemd[1]: Starting Arbitrary Executable File Formats File System Automount Point.
    Nov 04 21:59:09 arch systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
    Nov 04 21:59:09 arch systemd[1]: Starting Dispatch Password Requests to Console Directory Watch.
    Nov 04 21:59:09 arch systemd[1]: Started Dispatch Password Requests to Console Directory Watch.
    Nov 04 21:59:09 arch systemd[1]: Starting Journal Socket.
    Nov 04 21:59:09 arch systemd[1]: Listening on Journal Socket.
    Nov 04 21:59:09 arch systemd[1]: Starting Setup Virtual Console...
    Nov 04 21:59:09 arch systemd[1]: Starting Apply Kernel Variables...
    Nov 04 21:59:09 arch systemd[1]: Started Set Up Additional Binary Formats.
    Nov 04 21:59:09 arch systemd[1]: Started Load Kernel Modules.
    Nov 04 21:59:09 arch systemd[1]: Mounted FUSE Control File System.
    Nov 04 21:59:09 arch systemd[1]: Mounting POSIX Message Queue File System...
    Nov 04 21:59:09 arch systemd[1]: Mounting Huge Pages File System...
    Nov 04 21:59:09 arch systemd[1]: Mounting Configuration File System...
    Nov 04 21:59:09 arch systemd[1]: Starting Journal Service...
    Nov 04 21:59:09 arch systemd[1]: Started Journal Service.
    Nov 04 21:59:09 arch systemd-journal[120]: Journal started
    -- Subject: The Journal has been started
    -- Defined-By: systemd
    -- Support: http://lists.freedesktop.org/mailman/listinfo/systemd-devel
    -- The system journal process has been starting up, opened the journal
    -- files for writing and is now ready to process requests.
    Nov 04 21:59:09 arch systemd[1]: Starting Create list of required static device nodes for the current kernel...
    -- Subject: Unit kmod-static-nodes.service has begun with start-up
    -- Defined-By: systemd
    -- Support: http://lists.freedesktop.org/mailman/listinfo/systemd-devel
    -- Unit kmod-static-nodes.service has begun starting up.
    Nov 04 21:59:09 arch systemd[1]: Starting udev Kernel Socket.
    -- Subject: Unit systemd-udevd-kernel.socket has begun with start-up
    -- Defined-By: systemd
    -- Support: http://lists.freedesktop.org/mailman/listinfo/systemd-devel
    -- Unit systemd-udevd-kernel.socket has begun starting up.
    Nov 04 21:59:09 arch systemd[1]: Listening on udev Kernel Socket.
    -- Subject: Unit systemd-udevd-kernel.socket has finished start-up
    -- Defined-By: systemd
    -- Support: http://lists.freedesktop.org/mailman/listinfo/systemd-devel
    -- Unit systemd-udevd-kernel.socket has finished starting up.
    -- The start-up result is done.
    Nov 04 21:59:09 arch systemd[1]: Starting udev Control Socket.
    -- Subject: Unit systemd-udevd-control.socket has begun with start-up
    -- Defined-By: systemd
    -- Support: http://lists.freedesktop.org/mailman/listinfo/systemd-devel
    -- Unit systemd-udevd-control.socket has begun starting up.
    Nov 04 21:59:09 arch systemd[1]: Listening on udev Control Socket.
    -- Subject: Unit systemd-udevd-control.socket has finished start-up
    -- Defined-By: systemd
    -- Support: http://lists.freedesktop.org/mailman/listinfo/systemd-devel
    -- Unit systemd-udevd-control.socket has finished starting up.
    -- The start-up result is done.
    Nov 04 21:59:09 arch systemd[1]: Starting udev Coldplug all Devices...
    -- Subject: Unit systemd-udev-trigger.service has begun with start-up
    -- Defined-By: systemd
    -- Support: http://lists.freedesktop.org/mailman/listinfo/systemd-devel
    -- Unit systemd-udev-trigger.service has begun starting up.
    Nov 04 21:59:09 arch systemd[1]: Mounting Debug File System...
    -- Subject: Unit sys-kernel-debug.mount has begun with start-up
    -- Defined-By: systemd
    -- Support: http://lists.freedesktop.org/mailman/listinfo/systemd-devel
    -- Unit sys-kernel-debug.mount has begun starting up.
    Nov 04 21:59:09 arch systemd[1]: Expecting device dev-sda4.device...
    -- Subject: Unit dev-sda4.device has begun with start-up
    -- Defined-By: systemd
    -- Support: http://lists.freedesktop.org/mailman/listinfo/systemd-devel
    -- Unit dev-sda4.device has begun starting up.
    Nov 04 21:59:09 arch systemd[1]: Expecting device dev-disk-by\x2duuid-32d1daa9\x2daa59\x2d4ac1\x2da592\x2d23aa1ae655c5.device...
    -- Subject: Unit dev-disk-by\x2duuid-32d1daa9\x2daa59\x2d4ac1\x2da592\x2d23aa1ae655c5.device has begun with start-up
    -- Defined-By: systemd
    -- Support: http://lists.freedesktop.org/mailman/listinfo/systemd-devel
    -- Unit dev-disk-by\x2duuid-32d1daa9\x2daa59\x2d4ac1\x2da592\x2d23aa1ae655c5.device has begun starting up.
    Nov 04 21:59:09 arch systemd[1]: Mounting Temporary Directory...
    -- Subject: Unit tmp.mount has begun with start-up
    -- Defined-By: systemd
    -- Support: http://lists.freedesktop.org/mailman/listinfo/systemd-devel
    -- Unit tmp.mount has begun starting up.
    Nov 04 21:59:09 arch systemd[1]: Started File System Check on Root Device.
    -- Subject: Unit systemd-fsck-root.service has finished start-up
    -- Defined-By: systemd
    -- Support: http://lists.freedesktop.org/mailman/listinfo/systemd-devel
    -- Unit systemd-fsck-root.service has finished starting up.
    -- The start-up result is done.
    Nov 04 21:59:09 arch systemd[1]: Starting Remount Root and Kernel File Systems...
    -- Subject: Unit systemd-remount-fs.service has begun with start-up
    -- Defined-By: systemd
    -- Support: http://lists.freedesktop.org/mailman/listinfo/systemd-devel
    -- Unit systemd-remount-fs.service has begun starting up.
    Nov 04 21:59:09 arch systemd[1]: Starting Root Slice.
    -- Subject: Unit -.slice has begun with start-up
    -- Defined-By: systemd
    -- Support: http://lists.freedesktop.org/mailman/listinfo/systemd-devel
    -- Unit -.slice has begun starting up.
    Nov 04 21:59:09 arch systemd[1]: Created slice Root Slice.
    -- Subject: Unit -.slice has finished start-up
    -- Defined-By: systemd
    -- Support: http://lists.freedesktop.org/mailman/listinfo/systemd-devel
    -- Unit -.slice has finished starting up.
    -- The start-up result is done.
    Nov 04 21:59:09 arch systemd[1]: Starting System Slice.
    -- Subject: Unit system.slice has begun with start-up
    -- Defined-By: systemd
    -- Support: http://lists.freedesktop.org/mailman/listinfo/systemd-devel
    -- Unit system.slice has begun starting up.
    Nov 04 21:59:09 arch systemd[1]: Created slice System Slice.
    -- Subject: Unit system.slice has finished start-up
    -- Defined-By: systemd
    -- Support: http://lists.freedesktop.org/mailman/listinfo/systemd-devel
    -- Unit system.slice has finished starting up.
    -- The start-up result is done.
    Nov 04 21:59:09 arch systemd[1]: Expecting device dev-disk-by\x2duuid-bdf255b1\x2d60c6\x2d4714\x2d8dc8\x2d5bd057b49aaa.device...
    -- Subject: Unit dev-disk-by\x2duuid-bdf255b1\x2d60c6\x2d4714\x2d8dc8\x2d5bd057b49aaa.device has begun with start-up
    -- Defined-By: systemd
    -- Support: http://lists.freedesktop.org/mailman/listinfo/systemd-devel
    -- Unit dev-disk-by\x2duuid-bdf255b1\x2d60c6\x2d4714\x2d8dc8\x2d5bd057b49aaa.device has begun starting up.
    Nov 04 21:59:09 arch systemd[1]: Started Apply Kernel Variables.
    -- Subject: Unit systemd-sysctl.service has finished start-up
    -- Defined-By: systemd
    -- Support: http://lists.freedesktop.org/mailman/listinfo/systemd-devel
    -- Unit systemd-sysctl.service has finished starting up.
    -- The start-up result is done.
    Nov 04 21:59:09 arch systemd[1]: Mounted POSIX Message Queue File System.
    -- Subject: Unit dev-mqueue.mount has finished start-up
    -- Defined-By: systemd
    -- Support: http://lists.freedesktop.org/mailman/listinfo/systemd-devel
    -- Unit dev-mqueue.mount has finished starting up.
    -- The start-up result is done.
    Nov 04 21:59:09 arch systemd[1]: Mounted Huge Pages File System.
    -- Subject: Unit dev-hugepages.mount has finished start-up
    -- Defined-By: systemd
    -- Support: http://lists.freedesktop.org/mailman/listinfo/systemd-devel
    -- Unit dev-hugepages.mount has finished starting up.
    -- The start-up result is done.
    Nov 04 21:59:09 arch systemd[1]: Mounted Configuration File System.
    -- Subject: Unit sys-kernel-config.mount has finished start-up
    -- Defined-By: systemd
    -- Support: http://lists.freedesktop.org/mailman/listinfo/systemd-devel
    -- Unit sys-kernel-config.mount has finished starting up.
    -- The start-up result is done.
    Nov 04 21:59:09 arch systemd[1]: Mounted Debug File System.
    -- Subject: Unit sys-kernel-debug.mount has finished start-up
    -- Defined-By: systemd
    -- Support: http://lists.freedesktop.org/mailman/listinfo/systemd-devel
    -- Unit sys-kernel-debug.mount has finished starting up.
    -- The start-up result is done.
    Nov 04 21:59:09 arch systemd[1]: Mounted Temporary Directory.
    -- Subject: Unit tmp.mount has finished start-up
    -- Defined-By: systemd
    -- Support: http://lists.freedesktop.org/mailman/listinfo/systemd-devel
    -- Unit tmp.mount has finished starting up.
    -- The start-up result is done.
    Nov 04 21:59:09 arch systemd[1]: Started Create list of required static device nodes for the current kernel.
    -- Subject: Unit kmod-static-nodes.service has finished start-up
    -- Defined-By: systemd
    -- Support: http://lists.freedesktop.org/mailman/listinfo/systemd-devel
    -- Unit kmod-static-nodes.service has finished starting up.
    -- The start-up result is done.
    Nov 04 21:59:09 arch systemd[1]: Started udev Coldplug all Devices.
    -- Subject: Unit systemd-udev-trigger.service has finished start-up
    -- Defined-By: systemd
    -- Support: http://lists.freedesktop.org/mailman/listinfo/systemd-devel
    -- Unit systemd-udev-trigger.service has finished starting up.
    -- The start-up result is done.
    Nov 04 21:59:09 arch systemd[1]: Starting Create static device nodes in /dev...
    -- Subject: Unit systemd-tmpfiles-setup-dev.service has begun with start-up
    -- Defined-By: systemd
    -- Support: http://lists.freedesktop.org/mailman/listinfo/systemd-devel
    -- Unit systemd-tmpfiles-setup-dev.service has begun starting up.
    Nov 04 21:59:09 arch systemd[1]: Started Remount Root and Kernel File Systems.
    -- Subject: Unit systemd-remount-fs.service has finished start-up
    -- Defined-By: systemd
    -- Support: http://lists.freedesktop.org/mailman/listinfo/systemd-devel
    -- Unit systemd-remount-fs.service has finished starting up.
    -- The start-up result is done.
    Nov 04 21:59:09 arch systemd[1]: Starting Load/Save Random Seed...
    -- Subject: Unit systemd-random-seed.service has begun with start-up
    -- Defined-By: systemd
    -- Support: http://lists.freedesktop.org/mailman/listinfo/systemd-devel
    -- Unit systemd-random-seed.service has begun starting up.
    Nov 04 21:59:09 arch kernel: EXT4-fs (sda1): re-mounted. Opts: data=ordered
    Nov 04 21:59:09 arch systemd[1]: Started Load/Save Random Seed.
    -- Subject: Unit systemd-random-seed.service has finished start-up
    -- Defined-By: systemd
    -- Support: http://lists.freedesktop.org/mailman/listinfo/systemd-devel
    -- Unit systemd-random-seed.service has finished starting up.
    -- The start-up result is done.
    Nov 04 21:59:09 arch systemd[1]: Started Create static device nodes in /dev.
    -- Subject: Unit systemd-tmpfiles-setup-dev.service has finished start-up
    -- Defined-By: systemd
    -- Support: http://lists.freedesktop.org/mail

  • SAP won't start after recabeling sap system

    Hi,<br>
    <br>
    I have recently recabled my sap system (from wireless to wired) and now my sap instance won't start anymore. The weird thing is that nothing major was changed. When i read the logs from the work directory it seems it cannot load dbsdbslib.dll. I have updated to the latest version of the kernel and maxdb (kernel=7.00 patch 221, maxdb=7.6.06.07) and i made very sure i got the right kernel (NT AMD64). I also checked the environment settings for the <sid>adm user. The weird part is that it seems SAP cannot connect to the database, but the databse starts just fine and r3trans -d also returns no errors. Does anyone<br> have an idea what could be wrong?<br>
    <br>
    Kind regards,<br>
    Bas<br>
    <br>
    <br>
    trc file: "dev_disp", trc level: 2, release: "700"<br>
    <br>
    <br>
    command line arg 0:     D:\usr\sap\IDE\DVEBMGS00\exe\disp+work.EXE<br>
    command line arg 1:     pf=D:\usr\sap\IDE\SYS\profile\IDE_DVEBMGS00_sap<br>
    <br>
    ERROR => DlLoadLib()==DLENOACCESS - LoadLibrary("D:\usr\sap\IDE\SYS\exe\uc\NTAMD64\dbsdbslib.dll")<br>
      Error 126 = "The specified module could not be found." [dlnt.c       255]<br>
    sysno      00<br>
    sid        IDE<br>
    systemid   562 (PC with Windows NT)<br>
    relno      7000<br>
    patchlevel 0<br>
    patchno    221<br>
    intno      20050900<br>
    make:      multithreaded, Unicode, 64 bit, optimized<br>
    pid        3252<br>
    <br>
    kernel runs with dp version 243000(ext=110000) (@(#) DPLIB-INT-VERSION-243000-UC)<br>
    length of sys_adm_ext is 576 bytes<br>
    SWITCH TRC-HIDE on ***<br>
    ***LOG Q00=> DpSapEnvInit, DPStart (00 3252) [dpxxdisp.c   1287]<br>
    ShmProtect( 5, 3 )<br>
    SigIInit: ok (whoami=1)<br>
    Thread handle for mainthread created<br>
    SigIRegisterRoutine: handler for signal 11 installed (SigISegv)<br>
    Pipe created:
    .\pipe\SAP3252 <br>
    SigIInit: Create Message Thread<br>
    SigIRegisterExitRoutine: exithandler installed (DpHalt)<br>
    SigIRegisterTerminateRoutine: terminatehandler installed (DpHalt)<br>
         shared lib "dw_xml.dll" version 221 successfully loaded<br>
         shared lib "dw_xtc.dll" version 221 successfully loaded<br>
         shared lib "dw_stl.dll" version 221 successfully loaded<br>
         shared lib "dw_gui.dll" version 221 successfully loaded<br>
         shared lib "dw_mdm.dll" version 221 successfully loaded<br>
    dp_loc_queue_max_blk:     40000<br>
    mshost:               >sap<<br>
    DpSetCancelStrat: set timeout 0 at level 0<br>
    DpSetCancelStrat: set timeout 5 at level 1<br>
    DpSetCancelStrat: set timeout -1 at level 2<br>
    DpSetCancelStrat: set timeout -1 at level 3<br>
    rdisp/softcancel_sequence :  -> 0,5,-1<br>
    softcancel_sequence:               >0,5,-1<<br>
    use internal message server connection to port 3900<br>
    msserv:               >3900<<br>
    dp_bufreftime:          120 sec<br>
    dp_btctime:          60 sec<br>
    dp_autoabaptime:     300 sec<br>
    dp_autothtime:     60 sec<br>
    dp_autojavatime:     300 sec<br>
    dp_vm_alarm_time:     100 msec<br>
    dp_calldelayed_time:     60 sec<br>
    dp_startup_time:     20<br>
    dp_noptime:          0 sec<br>
    dp_keepalive:          1200 sec<br>
    dp_keepalive_timeout:          60 sec<br>
    dp_ms_keepalive:          60 sec<br>
    dp_ms_keepalive_timeout:          300 sec<br>
    switch off dp-keep-alive for old temus<br>
    dp_gui_auto_logout:     0 sec<br>
    dp_spoolalrm:          60 sec<br>
    dp_softcancel_timeout:          5 sec<br>
    rdisp/wp_restart_interval : 300 sec<br>
    DpISetTrcLog: trc logging active, max size = 20971520 bytes<br>
    dp_rfc_check_active:     1<br>
    dp_rfc_check_all_rfcs:     0<br>
    dp_http_check:     1<br>
    check_master_slave:     0<br>
    NiHsLGetServNo: got service name 'sapdp00' from operating system<br>
    NiIGetServNo: servicename 'sapdp00' = port 0C.80/3200<br>
    NiHsLGetServNo: got service name 'sapgw00' from operating system<br>
    NiIGetServNo: servicename 'sapgw00' = port 0C.E4/3300<br>
    NiIMyHostName: hostname = 'sap'<br>
    NiHsLGetNodeAddr: got hostname 'sap' from operating system<br>
    NiIGetNodeAddr: hostname 'sap' = addr 192.168.2.250<br>
    NiHsLGetHostName: found address 192.168.2.250 in cache<br>
    NiIGetHostName: addr 192.168.2.250 = hostname 'sap' (fq)<br>
    Mon Oct 26 16:14:29 2009<br>
    NiHsLGetNodeAddr: hostname 'www.doesnotexist0190.qqq.nxst' not found by operating system<br>
    WARNING => DpNetCheck: NiHostToAddr(www.doesnotexist0190.qqq.nxst) took 12 seconds<br>
    Mon Oct 26 16:14:45 2009<br>
    NiHsLGetHostName: address 1.0.0.1 not found by operating system<br>
    WARNING => DpNetCheck: NiAddrToHost(1.0.0.0) took 16 seconds<br>
    NiHsLGetServNo: got service name 'http' from operating system<br>
    NiIGetServNo: servicename 'http' = port 00.50/0080<br>
    NiHsLGetServName: port 1F.90/8080 not found by operating system<br>
    NiHsLGetServName: port FC.2B/64555 not found by operating system<br>
    NiHsLGetServNo: service name 'sapdp9988' not found by operating system<br>
    ***LOG GZZ=> 2 possible network problems detected - check tracefile and adjust the DNS settings [dpxxtool2.c  5521]<br>
    SigIRegisterRoutine: handler for signal 16 installed (DpTrcOnOff)<br>
    SigIRegisterRoutine: handler for signal 17 installed (DpTrcOnOff)<br>
    SigIRegisterRoutine: alarm handler installed (DpSigAlrm)<br>
    SigIRegisterRoutine: handler for signal 2 installed (DpSigInt)<br>
    SigIRegisterRoutine: handler for signal 15 installed (DpSigInt)<br>
    SigIRegisterRoutine: handler for signal 3 installed (DpSigQuit)<br>
    MtxInit: 30000 0 0<br>
    DpInitMtx: MtxInit o.k.<br>
    PPID environment not found<br>
    Thread handle for mainthread created<br>
    SigIRegisterRoutine: handler for signal 19 installed (DpSigPrivDisp)<br>
    SigIRegisterRoutine: handler for signal 18 installed (DpSigPrivDisp)<br>
    SigIRegisterRoutine: handler for signal 24 installed (DpSigPrivDisp)<br>
    SigIRegisterRoutine: handler for signal 0 installed (DpSigPrivDisp)<br>
    SigIRegisterRoutine: handler for signal 21 installed (DpSigPrivDisp)<br>
    SigIRegisterRoutine: handler for signal 22 installed (DpSigPrivDisp)<br>
    SigIRegisterRoutine: handler for signal 23 installed (DpSigPrivDisp)<br>
    SigIRegisterRoutine: handler for signal 25 installed (DpSigPrivDisp)<br>
    <br>
    <br>
    trc file: "dev_w0", trc level: 2, release: "700"<br>
    <br>
    *<br>
    ACTIVE TRACE LEVEL           2
    ACTIVE TRACE COMPONENTS      all, MJ

    M  command line arg 0:     D:\usr\sap\IDE\DVEBMGS00\exe\disp+work.EXE
    M  command line arg 1:     pf=D:\usr\sap\IDE\SYS\profile\IDE_DVEBMGS00_sap
    M  command line arg 2:     wp_id=0

    B  create_con (con_name=R/3)
    B  Loading DB library 'D:\usr\sap\IDE\SYS\exe\uc\NTAMD64\dbsdbslib.dll' ...
    M  *** ERROR => DlLoadLib()==DLENOACCESS - LoadLibrary("D:\usr\sap\IDE\SYS\exe\uc\NTAMD64\dbsdbslib.dll")
      Error 126 = "The specified module could not be found." [dlnt.c       255]
    B  *** ERROR => Couldn't load library 'D:\usr\sap\IDE\SYS\exe\uc\NTAMD64\dbsdbslib.dll'
    [dbcon.c      4905]
    M sysno      00
    M sid        IDE
    M systemid   562 (PC with Windows NT)
    M relno      7000
    M patchlevel 0
    M patchno    221
    M intno      20050900
    M make:      multithreaded, Unicode, 64 bit, optimized
    M pid        4000
    M
    M  kernel runs with dp version 243000(ext=110000) (@(#) DPLIB-INT-VERSION-243000-UC)
    M  length of sys_adm_ext is 576 bytes
    M  ***LOG Q0Q=> tskh_init, WPStart (Workproc 0 4000) [dpxxdisp.c   1349]
    M Mon Oct 26 16:14:47 2009
    M  SigIInit: ok (whoami=2)
    M  Thread handle for mainthread created
    M  SigIRegisterRoutine: handler for signal 11 installed (SigISegv)
    M  Pipe created:
    .\pipe\SAP4000
    M  SigIInit: Create Message Thread
    M  SigIRegisterExitRoutine: exithandler installed (wp_halt)
    M  SigIRegisterTerminateRoutine: terminatehandler installed (wp_halt)
    M  SigIRegisterRoutine: handler for signal 16 installed (DpTrcOnOff)
    M  SigIRegisterRoutine: handler for signal 17 installed (DpTrcOnOff)
    M  SigIRegisterRoutine: alarm handler installed (DpSigAlrm)
    M  SigIRegisterRoutine: handler for signal 2 installed (DpSigInt)
    M  SigIRegisterRoutine: handler for signal 15 installed (DpSigInt)
    M  SigIRegisterRoutine: handler for signal 3 installed (DpSigQuit)
    I  MtxInit: 30000 0 0
    M  DpInitMtx: MtxInit o.k.
    M  WaitParent Thread 3252 start
    M  WaitParent Thread 3252 created
    M  Thread handle for mainthread created
    M  SigIRegisterRoutine: handler for signal 19 installed (DpSigPrivDisp)
    M  SigIRegisterRoutine: handler for signal 18 installed (DpSigPrivDisp)
    M  SigIRegisterRoutine: handler for signal 24 installed (DpSigPrivDisp)
    M  SigIRegisterRoutine: handler for signal 0 installed (DpSigPrivDisp)
    M  SigIRegisterRoutine: handler for signal 21 installed (DpSigPrivDisp)
    M  SigIRegisterRoutine: handler for signal 22 installed (DpSigPrivDisp)
    M  SigIRegisterRoutine: handler for signal 23 installed (DpSigPrivDisp)
    M  SigIRegisterRoutine: handler for signal 25 installed (DpSigPrivDisp)
    <br>
    <br>
    trc file: "trans.log"<br>
    <br>
    <br>
    4 ETW000 r3trans version 6.14 (release 700 - 12.06.09 - 15:20:00).
    4 ETW000 unicode enabled version
    4 ETW000 ===============================================
    4 ETW000
    4 ETW000 date&time   : 21.10.2009 - 15:06:04
    4 ETW000 control file: <no ctrlfile>
    4 ETW000 R3trans was called as follows: r3trans -d
    4 ETW000  trace at level 2 opened for a given file pointer
    4 ETW000  [dev trc     ,00000]  Wed Oct 21 15:06:06 2009                                                   0  0.000000
    4 ETW000  [dev trc     ,00000]  db_con_init called                                                         0  0.000000
    4 ETW000  [dev trc     ,00000]  create_con (con_name=R/3)                                                  0  0.000000
    4 ETW000  [dev trc     ,00000]  Loading DB library 'dbsdbslib.dll' ...                                     0  0.000000
    4 ETW000  [dev trc     ,00000]  DlLoadLib success: LoadLibrary("dbsdbslib.dll"), hdl 0, addr 0000000188C00000
    4 ETW000                                                                                7580  0.007580
    4 ETW000  [dev trc     ,00000]      using "D:\usr\sap\IDE\SYS\exe\uc\NTAMD64\dbsdbslib.dll"               16  0.007596
    4 ETW000  [dev trc     ,00000]  Library 'dbsdbslib.dll' loaded                                            19  0.007615
    4 ETW000  [dev trc     ,00000]  function DbSlExpFuns loaded from library dbsdbslib.dll                    38  0.007653
    4 ETW000  [dev trc     ,00000]  Version of 'dbsdbslib.dll' is "700.08", patchlevel (0.211)               307  0.007960
    4 ETW000  [dev trc     ,00000]  function dsql_db_init loaded from library dbsdbslib.dll                   26  0.007986
    4 ETW000  [dev trc     ,00000]  function dbdd_exp_funs loaded from library dbsdbslib.dll                  24  0.008010
    4 ETW000  [dev trc     ,00000]  } DbSlSdbControl(rc=0)                                                    46  0.008056
    4 ETW000  [dev trc     ,00000]  { DbSlSdbControl(con_hdl=-1,command=39,arg_p=0000000000000000)            21  0.008077
    4 ETW000  [dev trc     ,00000]  } DbSlSdbControl(rc=0)                                                    15  0.008092
    4 ETW000  [dev trc     ,00000]  { DbSlSdbControl(con_hdl=-1,command=10,arg_p=0000000003B4F920)            20  0.008112
    4 ETW000  [dev trc     ,00000]  } DbSlSdbControl(rc=0)                                                    15  0.008127
    4 ETW000  [dev trc     ,00000]  New connection 0 created                                                  17  0.008144
    4 ETW000  [dev trc     ,00000]  000: name = R/3, con_id = -000000001, state = DISCONNECTED, tx = NO , hc = NO , perm = YES,
    4 ETW000                             reco = NO , frco = NO , timeout = 000, con_max = 255, con_opt = 255, occ = NO
    4 ETW000                                                                                50  0.008194
    4 ETW000  [dev trc     ,00000]  { DbSlSdbControl(con_hdl=-1,command=10,arg_p=0000000001A01768)            31  0.008225
    4 ETW000  [dev trc     ,00000]  } DbSlSdbControl(rc=0)                                                    17  0.008242
    4 ETW000  [dev trc     ,00000]  db_con_connect (con_name=R/3)                                             13  0.008255
    4 ETW000  [dev trc     ,00000]  find_con_by_name found the following connection for reuse:                16  0.008271
    4 ETW000  [dev trc     ,00000]  000: name = R/3, con_id = 000000000, state = DISCONNECTED, tx = NO , hc = NO , perm = YES,
    4 ETW000                             reco = NO , frco = NO , timeout = 000, con_max = 255, con_opt = 255, occ = NO
    </p>
    Edited by: B. v. d. Lienden on Oct 26, 2009 5:18 PM

    <div class=Section1>
    <p class=MsoNormal>Natalia,</p>
    <p class=MsoNormal> </p>
    <p class=MsoNormal>To answer your questions:</p>
    <p class=MsoNormal>1. Did you create the SAP ticket, where this problem is
    reported?</p>
    <p class=MsoNormal>I didn't report it to SAP because it is just an IDES test
    system. I can easily do a reinstall, but i would like to know the cause and
    solution to this problem.</p>
    <p class=MsoNormal> </p>
    <p class=MsoNormal>2. Do you have dbsdbslib.dll at this location? What version?</p>
    <p class=MsoNormal>Yes, i have the dbsdbslib.dll at location
    D:\usr\sap\IDE\DVEBMGS00\exe and also D:\usr\sap\IDE\SYS\exe\uc\NTAMD64</p>
    <p class=MsoNormal>Version is 7000.221.16.41497 (kernel 7.00 SP 221)</p>
    <p class=MsoNormal> </p>
    <p class=MsoNormal>your requested output:</p>
    <p class=MsoNormal> </p>
    <p class=MsoNormal>----
    </p>
    <p class=MsoNormal>disp+work information</p>
    <p class=MsoNormal>----
    </p>
    <p class=MsoNormal> </p>
    <p class=MsoNormal>kernel releaseu00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0 700</p>
    <p class=MsoNormal> </p>
    <p class=MsoNormal>kernel make variantu00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0 700_REL</p>
    <p class=MsoNormal> </p>
    <p class=MsoNormal>compiled onu00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0 NT 5.2 3790 Service Pack 2 x86
    MS VC++ 14.00</p>
    <p class=MsoNormal> </p>
    <p class=MsoNormal>compiled foru00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0 64 BIT</p>
    <p class=MsoNormal> </p>
    <p class=MsoNormal>compilation modeu00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0 UNICODE</p>
    <p class=MsoNormal> </p>
    <p class=MsoNormal>compile timeu00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0 Aug 23 2009 23:15:57</p>
    <p class=MsoNormal> </p>
    <p class=MsoNormal>update level u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A00</p>
    <p class=MsoNormal> </p>
    <p class=MsoNormal>patch numberu00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0 221</p>
    <p class=MsoNormal> </p>
    <p class=MsoNormal>source idu00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0 0.221</p>
    <p class=MsoNormal> </p>
    <p class=MsoNormal> </p>
    <p class=MsoNormal>----
    </p>
    <p class=MsoNormal>supported environment</p>
    <p class=MsoNormal>----
    </p>
    <p class=MsoNormal> </p>
    <p class=MsoNormal>database (SAP, table SVERS)u00A0u00A0 700</p>
    <p class=MsoNormal>u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0 </p>
    <p class=MsoNormal>operating system</p>
    <p class=MsoNormal>Windows NT 5.0</p>
    <p class=MsoNormal>Windows NT 5.1</p>
    <p class=MsoNormal>Windows NT 5.2</p>
    <p class=MsoNormal>Windows NT 6.0</p>
    <p class=MsoNormal>ALLUSERSPROFILE=C:\Documents and Settings\All Users</p>
    <p class=MsoNormal>APPDATA=C:\Documents and Settings\ideadm\Application Data</p>
    <p class=MsoNormal>CLIENTNAME=BSF02</p>
    <p class=MsoNormal>ClusterLog=C:\WINDOWS\Cluster\cluster.log</p>
    <p class=MsoNormal>CommonProgramFiles=C:\Program Files\Common Files</p>
    <p class=MsoNormal>CommonProgramFiles(x86)=C:\Program Files (x86)\Common Files</p>
    <p class=MsoNormal>COMPUTERNAME=SAP</p>
    <p class=MsoNormal>ComSpec=C:\WINDOWS\system32\cmd.exe</p>
    <p class=MsoNormal>DBMS_TYPE=ada</p>
    <p class=MsoNormal>DIR_LIBRARY=D:\usr\sap\IDE\SYS\exe\uc\NTAMD64</p>
    <p class=MsoNormal>DIR_PROFILE=D:\usr\sap\IDE\SYS\profile</p>
    <p class=MsoNormal>FP_NO_HOST_CHECK=NO</p>
    <p class=MsoNormal>HOMEDRIVE=C:</p>
    <p class=MsoNormal>HOMEPATH=\Documents and Settings\ideadm</p>
    <p class=MsoNormal>JAVA_HOME=C:\j2sdk1.4.2_21-x64</p>
    <p class=MsoNormal>LOGONSERVER=
    SAP</p>
    <p class=MsoNormal>NUMBER_OF_PROCESSORS=2</p>
    <p class=MsoNormal>OS=Windows_NT</p>
    <p class=MsoNormal>Path=D:\sapdb\programs\bin;D:\sapdb\programs\pgm;C:\j2sdk1.4.2_21-x64\bin;C:\WINDOWS\system32;C:\WINDOWS;C:\WINDOWS\System32\Wbem;C:\Program
    Files\Intel\DMIX;D:\usr\sap\IDE\SYS\exe\uc\NTAMD64</p>
    <p class=MsoNormal>PATHEXT=.COM;.EXE;.BAT;.CMD;.VBS;.VBE;.JS;.JSE;.WSF;.WSH</p>
    <p class=MsoNormal>PROCESSOR_ARCHITECTURE=AMD64</p>
    <p class=MsoNormal>PROCESSOR_IDENTIFIER=EM64T Family 6 Model 15 Stepping 13,
    GenuineIntel</p>
    <p class=MsoNormal>PROCESSOR_LEVEL=6</p>
    <p class=MsoNormal>PROCESSOR_REVISION=0f0d</p>
    <p class=MsoNormal>ProgramFiles=C:\Program Files</p>
    <p class=MsoNormal>ProgramFiles(x86)=C:\Program Files (x86)</p>
    <p class=MsoNormal>PROMPT=$P$G</p>
    <p class=MsoNormal>SAPEXE=D:\usr\sap\IDE\SYS\exe\uc\NTAMD64</p>
    <p class=MsoNormal>SAPLOCALHOST=sap</p>
    <p class=MsoNormal>SAPSYSTEMNAME=IDE</p>
    <p class=MsoNormal>SESSIONNAME=RDP-Tcp#47</p>
    <p class=MsoNormal>SystemDrive=C:</p>
    <p class=MsoNormal>SystemRoot=C:\WINDOWS</p>
    <p class=MsoNormal>TEMP=C:\WINDOWS\TEMP\2</p>
    <p class=MsoNormal>TMP=C:\WINDOWS\TEMP\2</p>
    <p class=MsoNormal>USERDOMAIN=SAP</p>
    <p class=MsoNormal>USERNAME=ideadm</p>
    <p class=MsoNormal>USERPROFILE=C:\Documents and Settings\ideadm</p>
    <p class=MsoNormal>windir=C:\WINDOWS</p>
    <p class=MsoNormal> </p>
    <p class=MsoNormal>----
    </p>
    <p class=MsoNormal>disp+work information</p>
    <p class=MsoNormal>----
    </p>
    <p class=MsoNormal> </p>
    <p class=MsoNormal>kernel releaseu00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0 700</p>
    <p class=MsoNormal> </p>
    <p class=MsoNormal>kernel make variantu00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0 700_REL</p>
    <p class=MsoNormal> </p>
    <p class=MsoNormal>compiled onu00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0 NT 5.2 3790 Service Pack 2 x86
    MS VC++ 14.00</p>
    <p class=MsoNormal> </p>
    <p class=MsoNormal>compiled foru00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0 64 BIT</p>
    <p class=MsoNormal> </p>
    <p class=MsoNormal>compilation modeu00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0 UNICODE</p>
    <p class=MsoNormal> </p>
    <p class=MsoNormal>compile timeu00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0 Aug 23 2009 23:15:57</p>
    <p class=MsoNormal> </p>
    <p class=MsoNormal>update levelu00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0 0</p>
    <p class=MsoNormal> </p>
    <p class=MsoNormal>patch numberu00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0 221</p>
    <p class=MsoNormal> </p>
    <p class=MsoNormal>source idu00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0 0.221</p>
    <p class=MsoNormal> </p>
    <p class=MsoNormal> </p>
    <p class=MsoNormal>----
    </p>
    <p class=MsoNormal>supported environment</p>
    <p class=MsoNormal>----
    </p>
    <p class=MsoNormal> </p>
    <p class=MsoNormal>database (SAP, table SVERS)u00A0u00A0 700</p>
    <p class=MsoNormal>u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0 </p>
    <p class=MsoNormal>operating system</p>
    <p class=MsoNormal>Windows NT 5.0</p>
    <p class=MsoNormal>Windows NT 5.1</p>
    <p class=MsoNormal>Windows NT 5.2</p>
    <p class=MsoNormal>Windows NT 6.0</p>
    <p class=MsoNormal> </p>
    <p class=MsoNormal> </p>
    </div>

  • My iPhone 5 won't start!

    My Iphone 5 won't start and tells me to connect the phone to ITunes but nothing happens when I do. The phone doesn´t show up in ITunes. What to do?

    Apologies, 11.0.4 is the most recent of course...
    You'll need to enter DFU mode.
    Connect the iPhone to your computer and launch iTunes
    Turn the iPhone off (hold down the power button at the top of the iPhone)
    Hold down the sleep/power button and home button together for exactly 10 seconds, then release the power button
    Continue to hold down the Home button until a message appears in iTunes telling you an iPhone in recover mode has been detected
    Hopefully this should work, with you being able to restore the device in iTunes.
    However, be warned that this will erase all content on the iPhone, content you can restore if you have saved backups on your Mac/PC or on iCloud.

  • Ok so I updated to iOS 7 on my iPod (5th) it let me update my apps but I cannot download new apps thanks to the terms and conditions. Also my iTunes won't start it just blank, I tried everything I need help

    Ok so I updated to iOS 7 on my iPod (5th) it let me update my apps but I cannot download new apps thanks to the terms and conditions. Also my iTunes won't start it just blank, I tried everything I need help

       Did you download the new iTunes update that was also released this afternoon? That might be the problem. The new iTunes update came out today as well as the new iOS 7 update and if you haven't downloaded the new iTunes update it may be a compatibility problem so if you didn't, first update to the new iTunes and try again.

  • All of a sudden Photoshop won't start [on a Macbook Air]

    Dear all,
    I'm on a MacBook Air with OS X 10.10.2, and I use Photoshop about once a month, but now I really need it, and it won't start:
    - Immediately after I click on the Photoshop icon I get "Adobe Photoshop CS5.1 cannot be opened because of a problem." And when I click on the "Report..." button I get a very technical message (see below).
    - I've used Photoshop on this machine for about a year with no problem, but recently I had a problem and needed to restore from my TimeMachine backup.
    - I don't know if the problem occurred immediately after the restore or not.
    - I've read innumerable threads on various forums, but nothing describes my problem exactly. I suspect a problem with my paths and permissions (since I read a report that restoring from a TimeMachine causes such problems occasionally), but I don't know which path is corrupted/missing/unreadable.
    - I've tried creating a new admin account and starting Photoshop from there. It didn't work.
    - I don't mind reinstalling, but I don't have an installer image. I started with Photoshop 6, then updated to CS2, CS4 and eventually CS5. I do have all the serial numbers but not all update-images.
    I would appreciate any hints on how to further diagnose and some the problem.
    Thanks a lot in advance!
    Bojidar
    And now here is my exact error message:
    Process:               Adobe Photoshop CS5.1 [12426]
    Path:                  /Applications/Bildbearbeitung/*/Adobe Photoshop CS5.1.app/Contents/MacOS/Adobe Photoshop CS5.1
    Identifier:            com.adobe.Photoshop
    Version:               ???
    Code Type:             X86-64 (Native)
    Parent Process:        ??? [1]
    Responsible:           Adobe Photoshop CS5.1 [12426]
    User ID:               501
    Date/Time:             2015-05-03 21:53:39.840 +0200
    OS Version:            Mac OS X 10.10.1 (14B25)
    Report Version:        11
    Anonymous UUID:        A0DC6EA7-1973-1B68-EFC7-5D60106F084D
    Sleep/Wake UUID:       1FA6367C-EEB2-4F46-8773-EBB176EAEAC7
    Time Awake Since Boot: 230000 seconds
    Time Since Wake:       2900 seconds
    Crashed Thread:        0
    Exception Type:        EXC_BREAKPOINT (SIGTRAP)
    Exception Codes:       0x0000000000000002, 0x0000000000000000
    Application Specific Information:
    dyld: launch, loading dependent libraries
    Dyld Error Message:
      Library not loaded: @executable_path/../Frameworks/adobe_caps.framework/Versions/A/adobe_caps
      Referenced from: /Applications/Bildbearbeitung/*/Adobe Photoshop CS5.1.app/Contents/MacOS/Adobe Photoshop CS5.1
      Reason: image not found
    Binary Images:
        0x7fff6f1c1000 -     0x7fff6f1f7837  dyld (353.2.1) <4696A982-1500-34EC-9777-1EF7A03E2659> /usr/lib/dyld
    Model: MacBookAir6,2, BootROM MBA61.0099.B18, 2 processors, Intel Core i5, 1.3 GHz, 4 GB, SMC 2.13f15
    Graphics: Intel HD Graphics 5000, Intel HD Graphics 5000, Built-In
    Memory Module: BANK 0/DIMM0, 2 GB, DDR3, 1600 MHz, 0x80AD, 0x483943434E4E4E384A544D4C41522D4E544D
    Memory Module: BANK 1/DIMM0, 2 GB, DDR3, 1600 MHz, 0x80AD, 0x483943434E4E4E384A544D4C41522D4E544D
    AirPort: spairport_wireless_card_type_airport_extreme (0x14E4, 0x117), Broadcom BCM43xx 1.0 (7.15.124.12.10)
    Bluetooth: Version 4.3.1f2 15015, 3 services, 19 devices, 1 incoming serial ports
    Network Service: Wi-Fi, AirPort, en0
    Serial ATA Device: APPLE SSD SM0256F, 251 GB
    USB Device: Internal Memory Card Reader
    USB Device: BRCM20702 Hub
    USB Device: Bluetooth USB Host Controller
    Thunderbolt Bus: MacBook Air, Apple Inc., 23.6

    Did tou try resetting the preferences usins the Photoshop keys as your tryind to start Photoshop.  Toy cab also use Windows explored or Mac finder deleteor rename you userid Photoshop preferende if you change you OS preferences to be able to see hiddeb files and folders. Do you read the link I posted?
    Restore preference files to default
    In this video, learn the two methods of resetting your preference files back to default: Manual preference file removal and Keyboard Shortcut method (starts at 5:05)
    by Julieanne Kost
    To restore preferences quickly using a keyboard short cut:
    Press and hold Alt+Control+Shift (Windows) or Option+Command+Shift (Mac OS) as you start Photoshop. You are prompted to delete the current settings. The new preferences files are created the next time you start Photoshop.
    Note: Using the keyboard shortcut, preference files for custom shortcuts, workspaces, and color setings will also be reset to default.

  • X11 won't start anymore!

    Hello,
    this is a desperate call: I am at a conference with my MBP, (10.6.7, all updates done). I need Matlab for my presentation, which needs X11.
    X11 (and XQuartz) decided that they won't start anymore: the icon bounces in the dock for a while, then sits there without the little light underneath, and X11 is "non responding".
    The logs show something like this.
    I have googled and searched: similar problems once in a while appear but no posted solution.
    I tried:
    1) reinstalling XQuartz (I would reinstall X11, but how? I do not have the disks with me, I am away!)
    2) from an admin account
    3) create a new account.
    4) repair permissions.
    5) reinstall the font update from Apple that was recently issued.
    HELP PLEASE!!!
    11-05-16 5:02:01 PM     [0x0-0x44044].org.x.X11[20759]     X11.app: DISPLAY ("/tmp/launch-bHvQen/org.macosforge.xquartz:0") does not match our id ("org.x"), unsetting.
    11-05-16 5:02:01 PM     [0x0-0x44044].org.x.X11[20759]     X11.app: main(): argc=2
    11-05-16 5:02:01 PM     [0x0-0x44044].org.x.X11[20759]      argv[0] = /Applications/Utilities/X11.app/Contents/MacOS/X11.bin
    11-05-16 5:02:01 PM     [0x0-0x44044].org.x.X11[20759]      argv[1] = -psn_0_278596
    11-05-16 5:02:01 PM     [0x0-0x44044].org.x.X11[20759]     Waiting for startup parameters via Mach IPC.
    11-05-16 5:02:01 PM     [0x0-0x44044].org.x.X11[20759]     X11.app: Could not connect to server (DISPLAY is not set). Starting X server.
    11-05-16 5:02:01 PM     [0x0-0x44044].org.x.X11[20759]     X11.app: Launching /usr/X11/bin/startx:
    11-05-16 5:02:01 PM     [0x0-0x44044].org.x.X11[20759]      argv[0] = /bin/sh
    11-05-16 5:02:01 PM     [0x0-0x44044].org.x.X11[20759]      argv[1] = -c
    11-05-16 5:02:01 PM     [0x0-0x44044].org.x.X11[20759]      argv[2] = /usr/X11/bin/startx
    11-05-16 5:02:01 PM     [0x0-0x44044].org.x.X11[20759]     font_cache: Scanning user font directories to generate X11 font caches
    11-05-16 5:02:01 PM     [0x0-0x44044].org.x.X11[20759]     font_cache: Updating FC cache
    11-05-16 5:02:01 PM     org.x.privileged_startx[20781]     font_cache: Scanning system font directories to generate X11 font caches
    11-05-16 5:02:01 PM     defaults[20791]
    The domain/default pair of (org.x.X11, dpi) does not exist
    11-05-16 5:02:01 PM     [0x0-0x44044].org.x.X11[20759]     Couldn't create cookie
    11-05-16 5:02:02 PM     org.x.privileged_startx[20781]     font_cache: Updating FC cache
    11-05-16 5:02:04 PM     [0x0-0x44044].org.x.X11[20759]     font_cache: Done
    11-05-16 5:02:04 PM     org.x.privileged_startx[20781]     font_cache: Done

    Here is the solution: there was nothing wrong with x11 per se!
    The problem was that about 30 files in /usr/bin (like gzip, egrep, hexdump etc) had been hosed (they had 0 file size).  The puzzling messages was due to the fact that startx uses hexdump, which was simply silently doing nothing (since it had 0 size!).
    I do not know what or when these files were zeroed: I suspect a recent OSX update which did not complete and I had to forcefully reboot.
    I have fixed it enough to work (copying those files from another mac), but who knows what else lurks beneath the surface of apparent serenity!
    I am actually surprised that the whole system did not stop functioning completely.
    MORALE: if something looks strange in the logs with x11 or other apps, check the file sizes  in your /usr/bin, you may be surprised too!

  • 24" iMac won't start when iPod is connected

    My 24" iMac won't start up/restart if my iPod is already connected to it. If I restart with the iPod connected, I just get a gray screen (with no apple logo) forever. Has anyone else experienced this problem? If so, any solution? I have Windows installed with boot camp, don't know if that's the problem, but I tried reseting the p-ram, but to no avail...
    Intel iMac 24", 7600 GT, 500GB, 2GB. Titanium Powerbook 667 MHz G4, loaded.   Mac OS X (10.4.7)   30 GB iPod Video

    My suggestion would be disconnect the iPod. That's just me though.
    http://docs.info.apple.com/article.html?artnum=93953
    I'm guessing Boot Camp is the culprit. Whatever emulated BIOS it's using doesn't like the iPod as a startup disk.

  • I was messing around with .kext files in the MacintoshHD and now my MacBook Pro won't start up.

    I was messing around with .kext files in the MacintoshHD and moved the system.kext and two others to my desktop and deleted the originals and now the MacBook Pro won't start up. All I get at start up is the apple icon then a bunch of text shows up part of which says Mac OS version: not yet set. then the apple icon turns into the power icon and tells me to turn off the computer. I've tried reinstalling from the install DVD by holding down option when powering on and selecting the install DVD and it just goes to a white screen with the apple icon and stays like that. I didn't have the disk utility on my Mac before this happened because I deleted it to make room on my computer a while ago so I'm not sure if that's why it won't load the install DVD but anyone who knows the solution to this with out going to get it repaired would be greatly appreciated. Thank you!

    Never mind my dad just found the original install DVD and that worked. Before I was using an install disc that Apple sent me for another issue I was having, but thanks for replying so quickly and trying to help on this Thanksgiving day!!!

  • I deleted my extensions manager and now my Mac won't start up. Please Help!!

    I have an IMac, 24" model, running OS X. For the past several days, little warning windows have been popping up with this annoying beep, telling me that my computer was infected with various viruses. 4, to be exact. Also, while on the internet, random pop-up windows have appeared, so I thought I did have a virus. So, to correct the matter (or attempt to), I deleted my preferences folder from the system folder, as well as the extensions manager.
    Now, the computer won't start up past the white logo screen with the turning gear thingy. I've tried resetting the PRAM, and starting in safe mode, and safe mode with the progress screen, and even something there while holding the option key (that one gave me an icon of my HD, but clicking on it took me back to an endless wait on the white screen). I've tried starting from the disk that came with the computer (I held the C key) but not only doesn't the computer start from the disk, it spits the disk out. I don't understand. The computer was fine until I deleted the ext. mgr and preferences, so it can't be that the computer went bad or something.
    I don't know what else to do here. I do have an extended service warranty with Best Buy, but I wanted to see if there was some way to fix this before hauling this thing off to the store. Any suggestions? I'm desperate here, because anything and everything I've tried (based on all the try-this and try-thats I found on the internet), nothing has worked.
    Please help.
    Thanks in advance.

    Well done! You've succeeded in turning your Mac into a useless brick.
    Deleting the System/Library/extensions folder and the associated manager removed most of the functionality from your OS.
    And all to get rid of what sounds like the MacDefender trojan or a variant.
    ref; http://support.apple.com/kb/HT4650 and http://support.apple.com/kb/HT4651
    You may have a slim chance of recovering if it will still boot in Target Disc Mode; in which case you can use another Mac to install the system remotely.
    And I doubt your warranty with Best Buy is going to cover user "error."
    Message was edited by: noondaywitch

  • After reboot firefox won't start. runs in task manager, but won't pop up. reset, safe mode and uninstall/re-install won't help. ok if no reboot.

    win7 Pro. has been running firefox ok. but lately with 25 and now 26, the firefox won't start. I can see firefox is running in task manager. but it just won't pop up.
    if I download it again and install it, it will run, but every time I reboot the system, it just won't run again.
    try: reset, safe mode, uninstall & reinstall, new/clean profile, none of those work.

    There may be a corrupted file on Firefox.<br>
    Please attempt to perform a clean reinstall. <sup>[https://support.mozilla.org/en-US/kb/forum-response-clean-reinstall (More Details)]</sup> This is different than a regular uninstall.
    If a clean reinstall does not fix the issue, please try starting your operating system in safe mode.<br>
    To do so, please do the following:
    #Ensure that your computer is shut down completely
    #Press the power button
    #Tap the <code>F8</code> key repeatedly before the Windows logo and startup screen is displayed
    #Select Safe Mode With Networking for the advanced startup options list
    Please report back with the results of both solutions.

Maybe you are looking for

  • Custom Movement Type - Hybrid of 671 and 657

    Summary: Due to a business process we are looking for a movement type similar to a 671, but instead of inventory going to unrestricted stock, it goes to blocked stock instead. Detail: We have a business process where one plant (store) will create a r

  • Very simple Char* conversion operator not working

    This should be simple, but it's not working.  The code below gives me a compiler error: Error 2 error C2440: 'initializing' : cannot convert from 'Foo' to 'char *'  class Foo  char * _data; public:  operator const char * () { return _data; }  Foo f;

  • System loses ability to suspend after resume

    After the last time I updated, I noticed some issues with suspend and resume on my laptop. Because of these problems, I haven't updated my desktop as of yet until I understand what is going on. I frequently suspend and resume my laptop as I move from

  • Invalid state when running first time after compile

    Often I will compile a package body without errors. The first time I run it, I will get the package is in an invalid state. The second time I run the package it will run fine. What is going on? Thanks, goo

  • Multi-machine sequence missing from AE?

    Hi there after i installed the script BG Render, not sure what happened but multi-machine sequence becomes missing from AE as it says on startup that there is an output module missing from after effects, really need to solve this as I am running out