Audition 3.0 and Premiere CS3

May be I am not as familiar with Soundbooth as I should, but at the moment I miss two important functions.
1. I can not easily replace one channel by another. Normally there is one better channel on tape than the other.
2. No import from CD (ripping), which is important because most editors carry there own music on cd with them. So I have to use 3rd party software or media player.
Therefore I decided to stay together with audition and upgraded to Audition 3.0. Now my question: Is there any possibility to get access to audition like in CS 2.0? may be using the bridge I am also not very experienced with. Or are there any other reccomendations for a audio workflow within PremierePro?
Thank you

> it gave them more sales opportunities for a separate Audition.
You always had to buy audition separately, so that is not a valid point. But the question is for the average person out there, how much audio editing do they really do. I know that there are people that do need the extended capabilities of audition, but i am not convinced that the majority of people do.IMHO.
Still i would thing it should be easy enough to give you an option to edit in audition or soundbooth.

Similar Messages

Canon Vixia HG21 and Premiere CS3

We just purchased a Canon Vixia HG21 and are unable to import the footage into Premiere CS3. Files are of .m2ts extension. Is Premiere CS3 not able to read these? Is CS4 better or able to? What are our options?

we have upgraded to CS4 and the program still can't import the m2ts files this camera generates
I assume that this means that you have the full-paid version of CS4. Is that correct? The reason that I ask is because the trial version will not handle anything MPEG.
Now, there have been reports of full-paid versions of CS4 reverting to the trial version, with the updating to CS4.2. If this has happened, again, you will not have support for anything MPEG. One test would be to find an MP3, or some other MPEG Asset, and try to Import that. If you get a failure, you likely have a trial version now. See Below:
The "cure" is to de-Activate your version and THEN uninstall. Run the Adobe Clean Script CS4 3 - 4 times, rebooting between each. Next step is to install the CS4 version, Activate again and then apply all updates to CS4.2. We do not know what causes a few updates to change the installation to the trial, but it happens too often. The above steps, in that order, work for all.
Good luck, and let us know if that helps.
Hunt

Rountrip workflow: Adobe audition 5.5 and Premiere Pro 5.5

I have found the following 3 ways to export from audition back into premiere.
1. FCP XML - This opens up in premiere but any track based levels that I have changed are ignored by premiere. (clip based ones are not)
2. Multitrack>Export to premiere - I only get 2 options here - In stems or full mixdown to 1 file.
3. Multitrack mixdown - 1 single file.
When I bring my audio back into Premiere I want it to be in seperate clips (not stems or single track) and I want my track based audio adjustments to come across with it.
It appears I have 3 options and they all fall short if I have to re-vist the project to make changes.
Please help its driving me crazy.

ryclark wrote:
What's the point of sending it out from Premiere, adjusting it in Audition and sending back the unmixed audio?
To make any minor changes later own down the road. Ideally, one would edit everything perfectly and never have to make another change to a project, but that happens (at least for me) about 1% of the time.
I really hope CS6 will have true dynamic linking, then Audition would be significantly more useful.

Encore and Premiere CS3 hanging while opening - EMERGENCY

I try opening Premiere or Encore on my Mac they just hang while opening ANY project file that is dated before today. I can make a new project, save it and open it...but any project made before today freezes both programs. They start loading the project and then it just hangs, with the colored wheel staying on screen until Force Quit is used. I have months of work done on this project and am literally 2-3 days away from completion, and backup projects won`t load either. I need some serious help on getting this resolved before I lose my mind and seriously contemplate quitting film altogether.
I have 3 gigs of ram, 2 x 2.66 Ghz dual core Intel xeon and CS3

One thing to try... create a new project and then import the old project into the new project
Other than that... this is for the Windoze world, but some of the steps may help
http://ppro.wikia.com/wiki/Troubleshooting

Adobe Audition CS5.5 with Premiere Pro CS5

Hello everybody.
I am considering downgrading from Master Collection CS5 to Adobe Production Premium CS5.5
But quite frankly it's just because of one application.
Though, i am in doubt if i'll actually going to make the downgrade.
And as you could and might have guessed it is the Adobe Audition CS5.5 Application.
Though really the whole pack has a GREAT improvement overall, I just actaully want to mix SEAMLESSLY with Premiere Pro and sound editing application (Audition).
Which leads me to my next question.
Now with Adobe Soundbooth CS5 closed off (by April 24th), and an UPGRADE for Soundbooth CS5 users to Audition CS5. Does this mean that Audition CS5.5 works SEAMLESSLY with Premiere Pro CS5?
Is there a dynamic link between the two applications? (Audition CS5.5 and Premiere Pro CS5)
AM i able to send mixes between the two? I really don't want to loose any Audio data, such as 5.1 channel mapping, volume mixing, denoising, general mixing etc.
All i really need is some good quality sound editing which works seamless, as After Effects and Premiere Pro has proved to me can be done.
Just want to know if it is possible. Or if I REALLY have to upgrade in order to get the sweet apples.
Best
Lucas

Hi _durin_
Thanks for your quick response.
But I didn't quite understand your answer.
I have seen Jason Levine's video earlier, as CS5.5 was announced and it looks natively good. I understand the mixdown attributes etc.
Please correct me if im wrong HOWEVER this workflow and settings applies still to ONLY the new CS5.5 Version?
Im currently using Master Collection CS5.
Instead of getting either the Production Premium, or Master Collection I am strongly considering updating Soundbooth CS5 to Audition CS5.5 (the option is there as i can tell by SoundBooth's website, though i get a weird error message when I click the update link...)
However I need to know, IF Audition CS5.5 works well with the PREVIOUS version (that'll be CS5 not 5.5), of Premiere Pro.
Are there an option to render the reference video, and generate a interchange session from WITHIN Premiere Pro CS5 to Audition CS5.5?
Im sorry if I either sound harsh or "willingly" misunderstanding. But I have only documentation on how the integration works between the current versions (meaning 5.5).
Im as you can guess VERY confused over the move from Adobe to make a .5 version instead of a full-fledged CS6 solution. It causes a stir, cause I then don't know much of the integration between the previous applications.
I have seen as an example that Photoshop CS5 have gotten the update to receive paintings/files made with their new touch API. So I wonder whether integrational features will be a part of the CS5 pack since, as i've mentioned, an application like Soundbooth gets replaced with Audition, with an upgrade option for the Soundbooth owners.
Im confused and hope you can help me clear my mind up, whether to upgrade or not. I will download the trial eventually, but not onto my current CS5 system since I already use this in my daily video work and want to AVOID confusion.
Best
Lucas

Premiere CS3 Stops when loading that 1 project !

Dear friends !
I have Vista 64
I use Premiere CS3
And recently upgraded my video card
I was working on a music video about 5 mins long , I added all effects , transition and etc, I have total of only 4 layers plus 1 audio.
Everything went smooth and I exported it to movie and got my final AVI, but suddenly I remembered that I had to add a 20 seconds clip
at the end, so I reopened the project and Premiere CS3 crashes !!
But if I open any other project, then it works fine.
So, I took my finished AVI (the one that I made earlier) to Encore CS3 and Encore Stopped as well ...WTH.
Then I Used my AVI to create a new project and added that 20 sec at the end of it, then "Export to Movie" again
result was fine , then I used the same project to "Export to Encore" Encore crashed ...WTH.
when I play that AVI file that I made earlier with Windown Media player, then it works fine.
Any Ideas !!

Glad that you got your Project finished.
As for what can freeze PrPro, well lots of things. These can be issues with the system, the Project, the Assets, and a few more.
Not sure what went wrong with your FLV to AVI conversion, but some converters play fast and loose with their export.
One thought for next time, or maybe to resurrect this Project is the Moyea FLV Importer plug-in for PrPro. It will work with PrPro 2.0, and I believe with CS3 too, though will not work with any flavor of CS4. For me, this plug-in works perfectly with FLV material, and all conversions are internal, and have yet to cause any issues. I use it with PrPro 2.0.
Good luck,
Hunt

Help me! Audition always failing exports to wav, mov, and Premiere Pro! WHY???

Hello,
I am sound editing and mixing a picture locked 25 min short film. When done with the mix and ready to export the mixdown, the export always takes forever (the project is 12GB large total) I mixdown to stereo file wav, but when I open the file, both VLC and Media Player don't play, with WMP saying its corrupt. I bring the same file into Premiere, and it says that it cannot import "because of a header problem"! What is that? I tried the same with the export to Quicktime (mov) format, and I got the same result. Go up to the window and choose Export to Premiere (you know, directly into Premeire) and it says it it will take 12 hours. I don't remeber cs5.5 taking this long. HELP PLEASE, I need to export this by tonight!!!
Export settings(both formats):
Convvert to 48 khz
Convert to 24 bt (32 with mov; only option)
tried both RF64 and Legacy Chunk whatever
Premeire Pro freindly setting on in Preferences
Windows 7 64 Pro
INtel Core i7 930
16GB RAM
GeForce GTS 250

I don't think a file of that length should exceed 4GB, but be aware that Audition CAN export wave files larger than that due to the RF64 support (vs. 'legacy chunk'), and Premiere can't yet open RF64 giga-wave-files!
Now, other than telling you that this shouldn't be happening, we'll need more information before we can track down what's wrong. Best thing is to detail for us what your export settings are, precisely.

I have installed both Audition 3 and Photoshop CS3 on a laptop with no Internet connection. How may they be activated? The methods documented in the software don't work.

I have installed both Audition 3 and Photoshop CS3 on a laptop with no Internet connection. How may they be activated? The methods documented in the software don't work.

Ned, thanks for responding. Internet access is not the problem, I will have a tower computer connected to Comcast.
Isolating the laptop from the internet is the issue.
From: Ned Murphy <[email protected]>
To: Mordecai benHerschel <[email protected]>
Sent: Wednesday, March 18, 2015 7:27 PM
Subject: I have installed both Audition 3 and Photoshop CS3 on a laptop with no Internet connection. How may they be activated? The methods documented in the software don't work.
I have installed both Audition 3 and Photoshop CS3 on a laptop with no Internet connection. How may they be activated? The methods documented in the software don't work.
created by Ned Murphy in Downloading, Installing, Setting Up - View the full discussionSince it is a portable machine, couldn't you go somewhere that has wifi available and use that as a temporary internet connection? If the reply above answers your question, please take a moment to mark this answer as correct by visiting: https://forums.adobe.com/message/7314414#7314414 and clicking ‘Correct’ below the answer Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: Please note that the Adobe Forums do not accept email attachments. If you want to embed an image in your message please visit the thread in the forum and click the camera icon: https://forums.adobe.com/message/7314414#7314414 To unsubscribe from this thread, please visit the message page at , click "Following" at the top right, & "Stop Following" Start a new discussion in Downloading, Installing, Setting Up by email or at Adobe Community For more information about maintaining your forum email notifications please go to https://forums.adobe.com/thread/1516624.

Can I Upgrade Photoshop Elements 4.0, Premiere Elements 2.0 and DW CS3??

I have to upgrade my PC from Windows XT to Windows 8.1.
The computer checks say my existing Adobe programs are not compatible with Windows 8.1.
It is possible to upgrade Photoshop Elements 4.0, Premiere Elements 2.0 and Dreamweaver CS3?
Thanks

You can upgrade to Elements 12 from any previous version. Just purchase the version you require from either the Adobe website or a store of your choice as either individual programs or as a bundle.
http://www.adobe.com/products/catalog/software._sl_id-contentfilter_sl_catalog_sl_software _sl_photoshopcollection.html
http://www.adobe.com/products/premiere-elements.htm
The latest version of Dreamweaver is subscription only however with prices starting at $19.99 per month.
http://www.adobe.com/products/dreamweaver.html
A quick check on the internet however has indicated that Dreamweaver CS3 will run Windows 8.

Rendering and Exporting in Adobe Premiere CS3

Does rendering stops when the computer/laptop locks? And what's the fastest way to render a 13 min movie in Adobe Premiere.. Does Media Encoder help?

Im using a Toshiba Laptop Satellite M305D-S4831
OS: Win 7 Ultimate 32-bit
Processor: AMD Turion X2 Dual Core Mobile RM-70 (2CPUs) 2.0 Ghz
Memory: 4096 mb RAM
DirectX 11
AtI Radeon 3100 Graphics
Im editing in Adobe Premiere Cs3
Export settings is:
File Type: Microsoft AVI
Range: Work Area Bar
Export Video and Audio is Checked..

Premiere CS3 and 24p exporting

Hello,
I've been working on this problem for a long time.
I have some clips shot with a Canon XL2 in 24p mode with 2:3:3:2 pulldown. I import in Premiere CS3 in a 24p project, go in "Interpreter footage" and set "Remove 24p pulldown", and in the timeline the clips are good, 24p without interlaced frames.
Then I go exporting: I want export in 24p (23,97) DV format.
1) If I choose "Microsoft DV AVI" with "DV (24p Advanced)", the clips I get are in 29,97 with still the flagged frame that should have been removed. So I have the same output format that I get setting DV NTSC with his 29,97 framerate.
2) If I choose "Microsoft AVI" and then I go with an alternative DV codec, such as the Panasonic's one (but I've tried many and I've got the same results, so I don't think it's their fault), I get a 23,97 clip, but the frame that has been removed is not the flagged and interlaced one, is one of the progressive. Watching the clip frame to frame I see that I have 24 fps: 3 progressive, 1 interlaced, 3 progressive, 1 interlaced, and so on.
Let me know. Sorry for my bad english but I'm italian.
Thank you

My own testing shows that Premiere doesn't create 24p friendly DV files. I've had much better success creating 24p MPEG2-DVD files.

Reinstalling XP over CS3 and Premiere CS4 without losing prefs etc.?

Hello people,
I have Master Collection CS3 (all programmes including Premiere Pro) plus Production CS4 (Premiere Pro, Encore, AE and AME) installed on an XP machine. Unfortunately I have had a series of very unlucky system and disk crashes which I have been unable to bring back to a fully working state. Cutting a long story short, after several methods of repair, I can boot but the system does not operate 100% correctly, and I now also have problems launching either Premiere (CS3 and CS4) and Photoshop since connecting a DV camera (they were working OK before then). Premiere CS3 quits to the desktop when I get to the 'open project' screen, CS4 tells me it cannot communicate with "ImporterProcessServer", Photoshop hangs after launch.
So in essence I have decided the only thing left to do is to reinstall a fresh copy of Windows XP and reinstall all the applications :-(
I have looked everywhere on the forum but I need guidance as to how to go about this process and still retain my preferences, plug-ins, cache files, preview files etc. - I have an old but very important project that I want to keep as much as possible in its original state, and that includes rendered files, references to special effects plus of course various settings. Plus of course all the activation/deactivation paraphernalia.
So, can please someone suggest me the best course and order of action to this purpose? Shall I uninstall CS3 & CS4 or not? Shall I deactivate first? Can I just reinstall XP afresh and then run the CS3+CS4 installers confident that they will leave my settings unaltered? What about the fact both CS3 and CS4 had downloaded updates applied to them?
I would be very grateful if someone could please tell me what steps should I do in order to return the system to a working state whilst preserving as much as possible of the current CS3/CS4 installation.
Many sincere thanks in advance.

Thank you, but sorry I do not wish to sound stupid or insisting: do I uninstall both CS3 and CS4 as well? I was hoping that if I do not uninstall CS3 and/or CS4 the Adobe installer might be smart enough to leave the updated files and my preferences. Also, I have a folder called Adobe in My Documents, which obviously contains about 30GB of preview and cache files, if I leave it in place will the uninstaller (and new installer) preserve its contents or is it going to delete everything?

My scene detect in Premiere cs3 on WIN 7, 64 bit is ghosted and can't turn on

I have my premiere cs3 on two computers one with xp pro and the other with win 7 64bit and I can't activate my scene detect on either operating system, I read manual and did some on line searches but it assumes in the tutorials it is already active. Am I doing something stupid or is there a way to turn it on
Joan

Yeah, sorry I should have been more specific. There is no way in Premiere to split it, which still amazes me. HDV split works great though. I just noticed the name of the OP, you would think that they would know that....
Phil

Adobe premiere cs3 and youtube

Hi Everyone,
Please give me some input on how I can use adobe premiere cs3 to create videos for youtube.... specifically... the videos that I will be working on will contain all of the same basic elements...
1. Still Images and Clip art only... no moving video... I want help with uploading the stills/clip art and also with timing who long each still with stay up individually....
2. Speech bubbles (the kind used in comic strips) timed to pop in above above the heads of those people or characters in the stills and clip art... I want help with timing when the bubbles come in and with creating them and saving them so that in future videos i won't have to create them again...
3. Voice over parts done by me to read the parts in the bubbles timed for comic effect... I want help with steps on how to do this...
4. Music added throughout the video just below my voice overs... same as above...
All of my videos will contain these elements... and I want to find an efficient way to set up adobe premiere the first time so that every time I go in to do my youtube videos in the future it will be just a matter of uploading the stills setting a time duration each still and the speach bubbles... reading the voice over, adding the music and then uploading it to youtube... I am new to the software and would appreciate any steps that could be give to help me accomplish these four goals...
Thanks,
John

the music you liked was made by chris duncan (who comes to forums but has been busy so hasnt been around lately ).. called " when goblins frolick " ...perfect title for the music.
probably should move this discussion to the lounge area cause it sorta has to do with learning some aspects of programs in general and certain techniques etc.. not really about cs3 and youtube per se...
but anyway..moderators will do that if they want to...
it is a little difficult at first to use photoshop to do what you want, and to use masks in cs3 or just fade graphics in and out and make them appear when wanted..move around etc...and also text issues ( sizes that show up OK on screen are usually pretty large ( pt ). But you'll find when you get past the initial learning part it will open up all sorts of very cool opportunity.. and freedom to do what you imagine...
AE is also used for animation stuff but I dont use AE myself...
if you search for animation tutorials using text baloons you may find some good one that walks you through the process...and maybe even you can find samples of things to download and experiment with on your computer.
my advice is to go ahead and learn what you can and do your own graphics etc .. cause that will open up all kinds of cool things for you to do .. not only in animation things but other things too ...
good luck !
local library might have a good book on animation stuff using adobe products ( versions you have).. can usually search local libraries with computer at home...

Question: Using Adobe Premiere CS3 and a Sony GV-HD700

Hi,
My name is Gerry and I am new to the forum. My problem is as follows: I have my Sony player connected via USB2 to my workstation. I am using widows xp sp3 and the device is properly recognized. When I choose capture in Premiere I recieve a message stating that the device is off-line. I power it on and off, but I am not able to see footage in the capture window. My settings are as follows:
Capture settings = Capture Format : HDV
DV/HDV Device Control
Video Standard: NTSC
Device Brand: Sony
Device Type: GV-D300 * I do not see my device type listed in the drop down list
Timecode Format: Auto Detect
Check Status: Offline
The only options I have tried changing is the Device type, also changing the device control from Serial device control to DV/HDV Device Control.
Any direction in this matter will be appreciated.
Regards...

The Sony HDV700 will work with CS3 via firewire. Settings on the deck and in CS3 are important.
The HDV700 is too new to have its own settings. Select "Generic Sony," that works for me.
DO NOT set the HDV700 format to AUTO--set it manually to either DV or HDV depending on the tape format. Note also, that its often necessary to turn off the deck and turn it back on before the change is recognized by the PC.
You DO NOT selct serial control--you select Firewire or IEEE (I forget what the option is labeled.
Use the pre-assigned option in setting the sequence parameters (yeah, I know, you're capturing to the project window not the timeline, but this is where CS3 gets the capture settings.)

Audition 3.0 and Premiere CS3

Similar Messages

Maybe you are looking for