Audition 3.01 and M-Audio Pro-Fire 610 Issue

I have both installed on my laptop. The system has a conexant sound card. The Pro-Fire is connected via firewire. I go into sound and set the Pro-fire as the default for recording. Audition DOES recognize the Pro-Fire...but will not let sound out of the program. Seems that it wants to output sound to the Pro-fire and gives me NO other choice. I wanted to leave the system soundcard as the default playback device...but Audition will not give me any choices other than one of the ten output devices. How can I leave the Pro-fire as input and the default system sound device as output?
Has anyone had this problem???
Happy Holidays
Bob

Thank You for the reply. The program is actually for my son, who is a music major in college...and he has been using my
Cool Edit Pro 1.2 forever. He uses it with no issues with the ProFire. Over the holidays, I upgraded his hard
drive to 500 gb on his laptop and installed Windows 7. All has been perfect up to the point of installing Adobe Audition
3.01. Then everything started going wrong. There is a setting where the ProFire is a choice in Audition of Audition
Windows 3.0 sound. Then in custom, I can choose the ProFire as the input...and still have his laptop speakers
as the default. That worked ONCE, then Audition bluescreened Windows 7 and I have had to uninstall and reinstall
the Profire to get it working again...and do a repair to Audition. Meanwhile...I installed my Cool Edit Pro 1.2a and tried
it and it worked right out of the box. So my best solution is to give him my cool edit pro and go to Adobe and get a
refund on his Student purchase of Audition 3. As long as he is getting out of my old 7 year old version...he can have it.
I have not had it installed on my system on over 5 years. Audition is way too much of a pain to keep dealing with. ASIO
is a joke. He has a Conxenant sound card in his HP laptop. He uses the Profire as a mixer to input a mic, guitars and
keyboard. I thought the new Audition would be leagues ahead of CEP...not so . CEP kills Audition and what it is able
to do, for his needs...
Happy Holidays...and Thank you again...
Bob

Similar Messages

Premiere Pro CC and BMD Intensity Pro Video Preview issues

I know there are many people having issues and confusion surrounding video preview file formats. For the most part, I have not had major problems, except this:
I'm trying to figure out why PPro doesn't want to output video preview with certain file formats on my Intensity Pro card, specifically 720p media. See below for system specs.
For the most part, any sequence created at 1080p24 or 30 out to an HDTV (1080i and p) via HDMI plays back fine. My sequence settings will reflect the correct file format as the media within it (usually ProRes).
When I have to edit a clip that came to me as 720p24, 25, 30, etc, I drop it into a sequence, have it change the settings to match the clip, and voila, I get playback. It would choose I frame only MPEG as the video preview file format. The originating file format doesn't really matter, whether it's h.264 .mp4, or H.264 .mov, or ProRes, etc.
I've been testing this in different ways, but for the most part, as soon as I drop a 720p clip into a sequence (doesn't matter what format or res), and allow PPro to change the sequence settings to match the clip settings, I get video preview playback initially. Great! But here's the kicker, as soon as I do anything, be that I go to a different sequence that is open, click on a different window such as the source monitor, or adjust audio levels, or drop in another clip (like a custom leader I made that is ProRes 422), I immediately lose video preview. The I/O card is stuck on the last frame it was able to playback, or just black. No matter what I do, I never get the video preview back again.
If I don't allow PPro to change sequence settings to match clip settings, I don't get any playback at all.
I have created a 720p sequence, and dropped in the 720p media, which then I don't get any playback at all. I've tried to keep the video dims the same, but change the video preview dims to 1920x1080 and it won't let me.
This seems to only happen with 720p media being cross converted to 1080p for playback on a 1080p monitor. All 1080p media plays back fine, no matter what the file format is. I have tried both Blackmagic settings in the control panel (System Prefs) set to output 720p to 1080i cross conversion on and off. I still get the same behavior as described above.
Any ideas is greatly appreciated.

Finally worked out a solution. I opened Premiere, started a dummy project, and before I imported any media, I went into Project Settings and changed the Renderer to Mercury Playback Engine GPU Acceleration (CUDA). Voila - now everything works as it's supposed to. Playback is buttery-smooth, and GPU-accelerated transitions render in real-time.

Windows 8 pro and 8.1 pro WiFi connection issues

I hope to start a meaningful dialogue with Microsoft about the WiFi issues that Windows 8 and 8.1 have.
I've been deploying Windows 8 and 8.1 since the Surface Pro was released. Since then we've deployed about 50-75 Surface Pro, Surface Pro 2, Dell Latitude 7000 series, Lenovo Yoga 13 IdeaPad and Lenovo Yoga Thinkpad devices. Some have Windows
8 pro, some have been upgraded to 8.1 Pro, and some were purchased with native 8.1 Pro builds on them. All of these devices have difficulty with wireless in one form or another. We were able to reduce some of the problems (not eliminate) on our
corporate LAN over the last year by turning off Windows' ability to turn off the wireless adapter to save power, or turning off some of the offload or chimney or other advanced capabilities of the adapters. Problems were still present, but less so.
Many of our users were able to be on the wired LAN, so the issues were somewhat glossed over.
We were finally able to fix our Wireless LAN issue (we believe everything is working as expected after 2 weeks of testing and observation) by updating the controller and AP firmware for our Aruba wireless infrastructure (we have one controller and 11 ap's
across 5 well connected sites). This is great- sort of...
The problem is that while it's now very obvious that in our case, updating the firmware on our corporate WiFi is able to get the various 8 and 8.1 devices working on our LAN, this is not a true fix as it does not address our mobile and wireless capabilities
while:
1. traveling
2. working at a partner's or customer's location and connecting to their WiFi
3. Working from Home
4. Etc.
We obviously can't update everyone's AP/wireless router firmware. The solution, by necessity, must reside on the Windows 8/8.1 machine and it's inability to reliably connect and stay connected to existing Wifi networks. I want
to know the current state and thinking that Microsoft has regarding this persistent issue (searching for "Windows 8.1 wifi" in the "Windows 8.1 IT pro" forums on TechNet returned 4000+ results). Ignoring or not addressing this
problem head on is a huge mistake. Let us know the root cause (SOMETHING has changed in the Network/IP stack) and a solution to work around the cause.
I'll conclude like this: I KNOW that some Wifi issues can be resolved with firmware updates to WiFi routers/APs. I KNOW that some WiFi issues can be resolved with driver updates or, in some cases, downgrades. I KNOW some Wifi issues can be resolved
by uninstalling Intel ProSET, or getting manufacturer direct drivers. I KNOW some issues can be resolved by turning off Windows' ability to turn off the adapter when "not in use" to save power. I KNOW some owner's of Windows 8/8.1
machines have downgraded to Windows 7 or XP or abandoned Microsoft altogether and move to Linux or Mac. The ONLY common problem across all of these solutions, is Windows 8/8.1. Therein MUST lie the ultimate answer.
DLovitt

I hope to start a meaningful dialogue with Microsoft about the WiFi issues that Windows 8 and 8.1 have.
I've been deploying Windows 8 and 8.1 since the Surface Pro was released. Since then we've deployed about 50-75 Surface Pro, Surface Pro 2, Dell Latitude 7000 series, Lenovo Yoga 13 IdeaPad and Lenovo Yoga Thinkpad devices. Some have Windows
8 pro, some have been upgraded to 8.1 Pro, and some were purchased with native 8.1 Pro builds on them. All of these devices have difficulty with wireless in one form or another. We were able to reduce some of the problems (not eliminate) on our
corporate LAN over the last year by turning off Windows' ability to turn off the wireless adapter to save power, or turning off some of the offload or chimney or other advanced capabilities of the adapters. Problems were still present, but less so.
Many of our users were able to be on the wired LAN, so the issues were somewhat glossed over.
We were finally able to fix our Wireless LAN issue (we believe everything is working as expected after 2 weeks of testing and observation) by updating the controller and AP firmware for our Aruba wireless infrastructure (we have one controller and 11 ap's
across 5 well connected sites). This is great- sort of...
The problem is that while it's now very obvious that in our case, updating the firmware on our corporate WiFi is able to get the various 8 and 8.1 devices working on our LAN, this is not a true fix as it does not address our mobile and wireless capabilities
while:
1. traveling
2. working at a partner's or customer's location and connecting to their WiFi
3. Working from Home
4. Etc.
We obviously can't update everyone's AP/wireless router firmware. The solution, by necessity, must reside on the Windows 8/8.1 machine and it's inability to reliably connect and stay connected to existing Wifi networks. I want
to know the current state and thinking that Microsoft has regarding this persistent issue (searching for "Windows 8.1 wifi" in the "Windows 8.1 IT pro" forums on TechNet returned 4000+ results). Ignoring or not addressing this problem head on is a huge
mistake. Let us know the root cause (SOMETHING has changed in the Network/IP stack) and a solution to work around the cause.
I'll conclude like this: I KNOW that some Wifi issues can be resolved with firmware updates to WiFi routers/APs. I KNOW that some WiFi issues can be resolved with driver updates or, in some cases, downgrades. I KNOW some Wifi issues can be resolved
by uninstalling Intel ProSET, or getting manufacturer direct drivers. I KNOW some issues can be resolved by turning off Windows' ability to turn off the adapter when "not in use" to save power. I KNOW some owner's of Windows 8/8.1 machines
have downgraded to Windows 7 or XP or abandoned Microsoft altogether and move to Linux or Mac. The ONLY common problem across all of these solutions, is Windows 8/8.1. Therein MUST lie the ultimate answer.
DLovitt
THIS.
I have been going through the same efforts as DLovitt with no joy. I have ruled out all variables which leads directly to something with Win 8/8.1 being the problem. Very frustrating that I cannot find a fix anywhere.
Subscribing to this thread in the hopes an answer is forthcoming.

ITunes 10.5.1 and Traktor Scratch Pro Library recognition issues

I'm using Traktor Scratch Pro (TSP, not TSP2) and it won't show my itunes playlists (using itunes 10.5.1)...anybody know how to fix this?

I ran Repair Permissions on my MBP hard drive and this corrected the problem. My iPhone now syncs perfectly with iTunes. I was about to, at the suggestion of Apple Support, remove iTunes and reinstall the program. But I thought I would try the old "standby" Apple cure (Repair Permissions) first. And it worked!! Hope this helps others with similar problems.
And, oh, BTW, if your iPhone 3GS battery dies, try charging it up with the AC adapter firstI think this whole problem started when I plugged in my dead iPhone into my MBP with iTunes running and iTunes, and/or the Mac didn't like it. FYI.

16bit and 24bit audio...potential issues?

I have a 2 hour concert that I put together initially using the 16bit audio recorded from the sound board to one of the cameras. I am about to get the final audio from the studio (stereo and 5.1 mix) and that will be 24bit.
I'm hoping to just lay these tracks in and they will match up, but will the difference in bit rates cause audio to go out of sync down the timeline?

I don't know why, but I've never had a problem with it, providing I follow these steps precisely:
1. Remove all the camera audio from the timeline
2. Change the Sequence settings to 24-bit
3. Insert the mix from the studio.
I would think there would be a sync issue, but I've never had one.
Before I remove the camera audio, I set an obvious sync point - snare hit, etc. Then I have a place to sync the new mix to, find the same sync point in the mix and match them up.

C5580 and Avery Design Pro 4.0 and Avery Design Pro 5.4 Issue

When I try to print multiple address labels nothing happens. I can print a single label fine, but if I have 4 different addresses on the project, nothing happens. The labels will print to another HP printer (Officejet 4215) just fine.
The issue came up with v4.0, so I tried v5.4, thinking it was an older software issue, with no luck
Thoughts??

Thanks for replying. I checked permissions, they are all fine. I have read/write. The destination for encoding and image coding's location is set to same folder as the asset. I have played with different settings here and changed the path to my external hard drive and than reverted back to original setting \library\cache\dvd studio pro

Acrobat x Pro / Word 2010 issues

I have been using Acrobat 9 Pro for quite sometime. I just downloaded Acrobat X Pro to try it out hoping I get better results with WORD 2010 than I did with 9.
I am using Office 2010 32bit, Windows 7, and Acrobat X Pro.
My issues are that When I try to convert a Word 2010 report to PDF, some of the graphics and text end up missing.
I have found that the quality is better when you just go to SAVE AS > (select) PDF.
The Acrobat Ribbon button, the SAVE AS ADOBE PDF, and printing using Adobe options give less than acceptable quality.
Has anyone had the same issues and is there a resolution? I am no reason to upgrade to "X" otherwise...

Hi there,
Could you provide some more detail about your file(s)? Are there any common elements between the files you've been converting to PDF via the PDFMaker Ribbon or the Adobe PDF printer that are disappearing? Is the text that's disappearing all of a certain font?
I'd like to try to help if you could upload a sample file or provide some additional detail!
Thanks,
David

Audition CS5.5 and Macbook pro performance

Hey guys, this is my first post on this forum. I’ll give you a little history as to how I got here.
Started off on CE2.0 then moved onto Audition 1.5 and now I’m on Audition 3.0
I know Audition like the back of my hand, It suits my workflow perfectly(well almost perfectly).
I found that I was reaching some limitations with Audition 3. A normal session for me would consist of 1 Midi track for the EZDrummer VSTi and then up to around 30 audio tracks. My genre is rock/indie/acoustic. Each track will generally have compression and reverb. My vocal track consists of Reverb, 2 compression effects(to compress and de-ess) and sometimes Antares Autotune.
What I found was that I could tell the system was starting to giveway, I was getting pops and clicks during playback, and I would have to start freezing tracks. I found that Antares Autotune was pushing my system, along with the Guitar Suite.
My main problems I found was comping tracks. I would need to create a new track for each vocal take, which ends up pushing the system even more.
I decided I needed to make a change. So I started looking for alternate DAW’s which had a “take” system. I was deciding between Logic or Protools. I’ve been running a PC setup since forever, so Logic would mean I would have to buy a Mac. I choose Logic 9 as I have witnessed my friend comp vocals on it, and it looked very user friendly, So I bought myself a Macbook Pro 15” with the i7 CPU.
So I’ve been using this setup for the last 2 months or so, and to be perfectly honest I miss Adobe Audition. Dont get me wrong, Logic is great, but it feels more like a toy compared to Audition. I feel more at home with Audition. More specifically the workflow, and the Studio Reverb plugin is the best reverb plugin I have EVER used. Not to mention the dynamics processor has great de-esser presets.
ANYWAY.
Its question time.
In Audition and more specifically Audition 5.5 Is there a built in “take” system which I’m not aware about? Or do we all just create a new track for each vocal take and comp that way? I don’t mind this way of Comping vocals, the problem lies when the system starts to pop and click due to having too many tracks. This brings me to my next question.
How is the performance of the Mac version of Audition 5.5 on a 15” i7 Macbook Pro with 4gig of ram? Unfortunately my trial period has run out, and I didn’t get much of a chance to push the system(I couldn’t open my .ses files).
Is there a way to convert .ses to .sesx? I tried converting to .xml and it didn’t carry over the plugins.
Can I extend my trial period of Audition 5.5 in anyway?
I really want to give Audition another shot if I can convert to .sesx with ease and have great performance with my Macbook pro.

Okay, I've spent some time this morning looking at Guitar Rig 5 in CS5.5 and CS6. Guitar Rig can install a lot of flavors of audio plug-in depending on your need. Audition only cares about the VST and Audio Unit (on Mac.)
There was an issue we found in Audition CS5.5 where some effects don't properly report their channelization. While not technically an Audition bug (it's part of the VST spec, I believe) we were not trapping these wayward plug-ins, which is why you saw Guitar Rig listed, but disabled. We addressed this issue in Audition CS6 by catching plug-ins that do not respond to channel requests as expected and assigning them as appropriate.
Guitar Rig is now enabled in Audition CS6 VST Effects List
More importantly, Audition CS6 opens up some pretty impressive effect channelization options which allow you to route the channels of a file into an effect in any manner you like. This allows you full control over which channel is assigned to which effect input, and which channel the output should be applied.
Feeding a 5.1 file into a Mono effect now enables precise control over channel routing.
Full control over 5.1 files into 5.1 effects as well. Any combination of channelizations and effects should work well.
Lastly, here's Guitar Rig 5 running in Audition CS6. While it definitely works, I do not recommend modifying this particular guitar track. Much like trying to pitch correct Freddie Mercury, Keith Richards guitar work does not benefit from additional processing

HEP!!!!! The video and the audio not sync after export from Premiere Pro CC 2014

when i play in premiere it ok but when i export it become not sync whith the audio

i was do a test with some player ,when i play from all this player it result is not the same:
KMPlayer :Audio not sync with video
itune :audio not sync with video and very lag
QuickTime :Can't play anymore
Windows Media Player : Very good no lag and the audio perfectly sync with video
put in Audition CC2014 (Multitrack) :Audio sync with video but very lag
put in Premiere Pro CC2014 (create new project and put the video in) :very lag but audio was sync
Nero Kwik Media :Very good no lag and the audio perfectly sync with video

Cutting and pasting audio in logic pro 8

OK just would like to know if cutting and pasting audio in logic pro 8 is as tedious as it is in logic pro 7.
Thanks
Djed19

mrsandsteve wrote:
but it is normalised and in the sample editor?
Looks like it is normalized to the infinity
Can you audition anything at all when play this audio region ?
!http://img59.imageshack.us/img59/4967/aglogo45.gif!

Premiere Pro CC Cutting off frames and shifting audio from .MOV

Hi everyone! I recently converted from Premiere Pro CS6 to CC. I've noticed an incredibly frustrating problem that I can't diagnose. In CS6 my Quicktime files would come in just fine, with correct audio lining up. However in Premiere Pro CC, the first two frames are cut off and the audio is shifted forward.
I only have one machine: a 2009 MacPro, with the only main upgrade being a Nvidia 680.
Here are the two files in question if anyone wants to see what I am running into:
https://www.dropbox.com/sh/1xaez5axno7ntq5/AADUybHCiJsGMgj-ZpqMGFvga?dl=0
These files are coming out of our 3D software, Blender. Yes they're half 1920x1080 - they are preview renders and not final.
Any help would be appreciated

Camtasia http://forums.adobe.com/thread/836800 may help
-and Lagarith Codec http://forums.adobe.com/thread/1287577
-and http://forums.adobe.com/thread/775288
-and http://forums.adobe.com/thread/453044
-and http://forums.adobe.com/message/3202148

MacBook Pro won't automatically switch between internal speakers and display audio

I have a MacBook Pro that connects to a LED Cinema display. It used to automatically switch between internal speakers and display audio when plugged in to the display but won't anymore. I have to manually change it in System Preferences --> Sound. Does anyone know how to make it do that again?
thanks,
Ben

I just want to add, I have the same problem, and just want to help raise awareness of it.
1st, the problem only started recently (have been using the Thunderbolt display since it was released), I did not have this problem, and noticed it beginning only in the last month. (since January)
2nd, My particular setup, includes a hard drive attached to the firewire port on the back of the Thunderbolt Display (so, I am wondering if anyone else experienced this problem with a firewire drive being connected).
     My full setup:
          Macbook Air (2011)
         Thunderbolt display
          Western Digital drive (attached to firewire of display)
3rd, If I go into settings, what I will see is the "Display Audio" is selected (but no sound coming out),
If I then select "Internal Speakers," a buffered "history" of all the sounds I did not hear is then played (pretty funny actually) - for example, if I sent mail, adjusted the volume, and started playing a song.... it immediately plays all those sounds when selecting "Internal Speakers"
4th, If i then select "Display Audio" - it does nothing
5th, what I have to do, to resolve this is: eject all my hard drives, disconnect the thunderbolt cable, then reconnect the thunderbolt cable, and everything works as normal.

In the past when I have imported my dslr video/audio files and then my zoom audio files Final Cut Pro has organized them in pairs in my library. For some reason my video/audio and my audio are being organized seperately. How do I fix this? Thanks!

In the past when I have imported my dslr video/audio files and then my zoom audio files Final Cut Pro has organized them in pairs in my library. For some reason my video/audio and my audio are being organized seperately. How do I fix this? Thanks!

Thank you Russ! Seems as though the timestamp on my audio files was completely incorrect so it placed the files far away from the corresponding video. I've modified the timestamp information and this has helped. The hour/minute information is incorrect but at least now I'm in the ballpark. Thank you!

Premiere Pro CC 2014.2 and AVCHD audio bug

The AVCHD audio is mangled by Premiere. Details below.
I recorded a 2 act play and I'm editing it in Premiere. Each act is about 1 hour so the camera recorded spanning MTS files.
Act 1 imported perfectly. No problem.
When importing act 2, I noticed some audio glitches and the audio quickly lost sync. After further investigation, I found that:
- The AVCHD file plays perfectly fine in Quicktime player
- The audio track in Premiere is exactly half the length of the video
- When listening closely, it sounds like it plays 1 second, skips 1 second, plays 1 second, etc. Which is consistent with losing sync gradually and finishing the audio twice as fast as the video.
It seems related to the problem in this thread. I'm at a loss as to what to try next.

After posting the initial thread, I reinstalled Premiere Pro CC (7.0), created a new project, imported the AVCHD files and the audio was synched.
I then opened the file in CC 2014 and the audio was still synched.
So it appears to be a bug in AVCHD conforming in 2014 only. While not a fix, I hope this workaround will help others.

Macbook Pro installed windows 7 professional and no audio :(

i've serached for sulutions all around the web and nothing, i've recently installed windows 7 in my macbook pro(newones) for school matters and there's no audio :s
Things I tried:
install dirvers from cd included
install realtek drivers manually
reinstall windows 7

At this point, if you try installing driver again, try using Driver Sweeper 2.0 from Guru3D to sweep and delete drivers in addition to uninstalling. That can clean things up and help, but I am at a loss and just from reading seems mixed results on MBP as to which ones to use and work or not.
So do browse through today's posts. Though I am perplexed MacRumors couldn't help - seems mixed and the Mac Pro section sometimes more help than Windows on Mac. Though the MacBook area you tried also?

Audition 3.01 and M-Audio Pro-Fire 610 Issue

Similar Messages

Maybe you are looking for