Audition 3.01 suddenly wont startup

I've been using Audition 3.01 for a couple of years with no major problems. I'm using it mainly as a wave editing/mastering environment so there are periods of time (e.g. weeks to months) where I don't run it.
Recently I tried to start the program and did not even get a splash screed before I got an error from Audition stating the following:
"Adobe Audition has encountered a problem and needs to close. We are sorry for the inconvenience."
Clicking on the details link gave the error signature
"AppName: audition.exe     AppVer: 3.0.7283.0     ModName: unknown
ModVer: 0.0.0.0     Offset: 705c7473"
I don't know of any way to troubleshoot this as the error message dosn't provide any information useful to the user (there is however a further list of ~100 DLL modules and the stack contents displayed on another screen)
I've uninstalled all programs that I can determine that were installed after my last successful startup (last August) and I've reinstalled Audition.
The strange thing is that each time I reinstall Audition it will start immediately after installation and work fine until I reboot the system. If I reboot the system and try to run again I get the error again. This happens without loading any VSTI or DX addons in Audition
My system is:
Intel(R) Core(TM)2 CPU
      6600 @ 2.40GHz
    2.40 GHz, 2.00 GB of RAM
Windows XP SP 3
Anyone have an idea where to start troubleshooting
Thanks
Erich

It might be a problem with the writing and reading of Audition's configuration and preferences files. This FAQ from Audiomasters sheds some light on how to cure such problems. It was written for AA 2 but if you substitute 3 for 2 it might help with sorting out your problem.
http://www.audiomastersforum.net/amforum/index.php/topic,5184.0.html

Similar Messages

My iphone 5 suddenly wont fully boot...it stuck on the apple logo and goes of after 20 -25 secs and comes on by itself after a minute or two but still stuck on apple logo..also i am able to see a bit of lighting on the dark screen whenever it goes of

my iphone 5 on the ios 7.1.2 suddenly wont fully turn on...it gets stuck on the apple logo and stays like that for approximately to 90 secs then goes blank but I can see a bit of lighting behind the dark screen....it goes off by itself and comes on by itself trying to boot but still gets stuck on the apple logo after the dim light shows....when I connect to iTunes my phone can only be recognised only in recovery mode thus if I force it into recovery mode. My main worry is I don't have a back up of any of my data...on icloud I have just less than 2GB of my data which is as a result of incomplete back up...HOW CAN I GET THIS PHONE WORKING AGAIN WITHOUT LOSING MY DATA...if I can only just recover my data I would really appreciate it as I really need almost everything on it back...if I can only get retrieve my data and lose the phone I wouldn't mind at all....Anybody know how to resolve this??Kind Regards

Anyone have any suggestions? or is everyone else just as clueless as me !

My ipod touch (4th) suddenly wont connect to my wifi. Other gadgets are connected though. I tried resetting the network and turning the wifi (and ipod) on and off but it still wont work. Any suggestions on what to do?

My ipod touch (4th) suddenly wont connect to my wifi. It connected fine before and all of my other electronics (tablets, computers, laptops, gaming systems, etc.) are connected and working completely fine. I tried turning the wifi setting on my ipod on/off as well as the actual ipod itself. I also tried resetting the network settings but neither of these options worked. Any suggestions on what I should do?

Does the iOS device connect to other networks?
Does the iOS device see the network?
Any error messages?
Do other devices now connect?
Did the iOS device connect before?
Try the following to rule out a software problem:
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Power off and then back on your router
.- Reset network settings: Settings>General>Reset>Reset Network Settings
- iOS: Troubleshooting Wi-Fi networks and connections
- Wi-Fi: Unable to connect to an 802.11n Wi-Fi network
- iOS: Recommended settings for Wi-Fi routers and access points
- Restore from backup. See:
iOS: How to back up
- Restore to factory settings/new iOS device.
If still problem make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
Apple Retail Store - Genius Bar

Cant locate my hard drive...wont startup

hello
Ive been reading through problems where machines wont startup...only the flashing icons and clicking...still I cant find a solution...is my machine finally failing
Ive tried inserting the installation disk and reinstalling it but the destination window is empty [i dont see my disk]...please help with a fix...
Message was edited by: marAz14

marAz14 wrote:
Ive been reading through problems where machines wont startup...only the flashing icons and clicking...still I cant find a solution...is my machine finally failing ?
A flashing disk icon means the bootloader that starts up your Mac can't find a suitable startup disk. Something happened to the internal HDD to cause this, the damage may be repairable or not.
Ive tried inserting the installation disk and reinstalling it but the destination window is empty [i dont see my disk]...please help with a fix...
It can't see the disk for the same reason that the bootloader couldn't. Let's try to see if it is fixable before reinstalling everything and losing all your settings. Since you already are able to start up from the Install CD/DVD, go to the Utilities menu and select *Disk Utility*. There, check and see if the HDD device appears on the left column. Under and indented you should see the volume by name.
If the device does not appear, then it is really hosed and you will need a new one.
If it appears, with or without the volume, it means it is damaged but may be repairable. Click on the device and do a *Repair Disk*. If it says there are errors, repeat *Repair Disk* until it comes out clean with no more errors. After that, reboot and see if the Mac will start up correctly. When it does, run Disk Utility again (it is found inside the startup volume's Utilities folder) and do a *Repair Disk Permissions*. If all is well, you'll be a happy camper and your Mac will live to see another day.
If you can't get the *Repair Disk* procedure to come out without errors, it means that the damage is more severe and Disk Utility can't repair it. You can either get heavier duty tools, like TechTool Pro or Disk Warrior, or you can choose to format the HDD and reinstall afresh. Note that you will lose everything. If you decide to format and the formatting has errors, it also means the drive is permanently damaged and will need to be replaced.
Let us know how it turned out and welcome to Apple Discussions.

My iphone 6 suddenly wont connect to wifi unless right next to it

iPhone 6 running ios 8.2 suddenly wont connect to my wifi unless extremely close. it is not the wifi as all other devices including an iPad 4th gen, macbook pro 13 inch and iPhone 4s have full bars from the room i am in, sometimes the iPhone 6 will get 1 bar but it wont work on the one bar. Does anyone know what could have caused this?

thanks heaps, will test on a different wifi network and take in to apple if its the same

IPhoto suddenly wont import photos from my iPhone

iPhoto suddenly wont import photos from my iPhone.
Keeps sending me error messages... wrong format.
anyone know about this?

There are 9 different versions of iPhoto and they run on seven different versions of the Operating System. The tricks and tips for dealing with issues vary from version to version and OS to OS. So before anyone can help, they need information to work with. Basic stuff:
- What version of iPhoto.
- What version of the Operating System.
- Details. What were you doing when the problem arose?
- Did it ever work properly?
- Are there error messages?
- What steps have you tried already to solve the issue.
Anything else you can think of that might allow someone else to understand your issue.
With this kind of information somebody can develop a starting point for troubleshooting the issue.
Posts that consist of "iPhoto doesn't work. Help" or "iPhoto won't print" or "Suddenly I have no photos!!!!!!!!!!" mean that any helper is simply guessing. More information means you get better assistance. (And no, more exclamation marks do not get help faster or make your issue seem urgent. They just make it seem like you have a stuck key )

Disk Utility wont startup

I'm trying to start Disk Utility (under mac os 10.4.8, intel) but it wont startup. It bounces one time in the dock and then dissapers.
I tried a copy of an other computer, but the same problem. I Repaired Permissions in the terminal. I've reset my P ram.
This didn't work at all. Anyone an idea?

Wow, that's not good.
The first four bytes of a "Universal" Mach-O loadable object and/or executable should be (in hexadecimal representation, which is what the "0x" prefix signifies):
<pre>0xCAFEBABE</pre>
but instead, it's saying that the first four bytes are:
<pre>0xCC8B45D0</pre>
In other words, the internal data of the file has been altered or is otherwise incorrect so that it's unusable.
Before doing anything else, I would, if you haven't already done so, startup from your Install DVD/CD and use Disk Utility to make sure your disk directory checks out okay. Use the Verify/Repair Disk buttons to do this. How to repair this problem short of an Archive and Install is a bit tricky.
What exactly did you try copying from another Mac? That could work, but you need to make sure that you only copy it from a Mac of the same architecture: Intel-Mac to an Intel-Mac and PowerPC to a PowerPC Mac. Note that the Disk Utility application itself is most likely fine, there's no need to copy that. What you want to copy is the /System/Library/PrivateFrameworks/DiskImages.framework/. Copy that "DiskImages.framework" folder from another Intel-based Mac and put it into the /System/Library/PrivateFrameworks/ folder on your (damaged) Mac. Replace the existing copy. (You'll need to click the "Authenticate" button to enter your password in order to accomplish this). Then try launching Disk Utility to see if it will launch successfully.
Hope this helps....
Dual 2.7GHz PowerPC G5 w/ 2.5 GB RAM; 17" MacBook Pro w/ 2 GB RAM - Mac OS X (10.4.8)

Http service in the win nt services wont startup

http service in the win nt services wont startup either manually or automatic
please help.

My suggestion is to navigate to the Apache home and startup Apache manually. The console window will let you know if there is something wrong with the configuration files.
Frank

My macbook wont startup

my macbook wont startup, i have tried using the PRAM reset and I hear the second start up chime and then it says start up disk is full and the screen stays blue. What can I do?

Prior to this, were you getting messages indicating that your start up disk was "almost" full... suggesting you you clear up some space? Was your machine running very slow or possibly frequently crashing?

Iphone4 switched off suddenly wont turn on

Iphone4 switched off suddenly wont turn on and i did all the steps but nothing work , Ituns doesn't even read my phone

Pressd and Hold the Sleep/Wake Button and the Home Button at the Same Time...
Waited for the Apple logo to Appear...but it doesnt

Laptop wont startup when I turn it on..white screen comes up but wheel just keeps turning

Hi my laptop wont startup after I turn it on..The white screen with the apple comes up and the wagon wheel just keeps on turning.

What cat flavor does your Mac have? Lion? Mountain Lion? Older cats?

G5 Wont Startup

Hey Guys!
So I have a G5 tower that wont startup. Heres whats going on:
-When I try to start it up normally it gets to the spinning grey wheel then turns off.
-Resetting the PRAM does nothing. I might need a new PRAM battery but I'm not sure if that explains the symptoms. I ordered a new one though, should be here soon.
-When I try to boot off a Tech Tool Pro DVD I get a kernel panic screen, that says You need to restart your computer. Hold down the Power button blah blah blah... The text on the screen ends with BSD process name corresponding to current thread:kernel_task
-Tried to boot off the Tech Tool DVD with the HD unplugged, same error.
-When I try to start up in safe mode it stays on the spinning grey wheel for a couple of minutes, then turns off.
-In single user mode ran fsck -y and it returns:
disk0s3: I/O error.
Invalid node structure
(4,275)
**Volume check failed
/dev/rdisk0s3 (hfs) EXITED WITH SIGNAL 8
and then says
'PowerManagement emergency overtemp signal. Going to sleep!'
Over and over.
-I reset the nvram in open firmware earlier, which did nothing, but now when I try to start up in open firmware the screen just stays black and nothing happens.
-Earlier, booting in verbose mode would return some errors, then shut down immediately, but now its just goes to a black screen as well.
-Resetting the PMU didn't do anything.
-Switched the RAM around, so I'm pretty sure its not a problem with the RAM, or the RAM slots.
Any ideas on what's going on or what I should do next? Or should I just wait for the new PRAM battery? Thanks for helping!

Any areas I should concentrate on?
CPU heatsinks, Video card, RAM, Fans, Power supply.
about a foot away from my 10' sub. Could that have caused the damage?
I wouldn't think so, at least yet.
So how would I go about fixing the HD? TDM maybe?
Yes, but I think we have to take care of the heat issue first.

My MacBook Air wont startup after login

my MacBook Air wont startup after login???

Try to boot your computer in Safe Mode: restart and hold the shift key down.
This can take some time, so be patient.
Explanation here: http://support.apple.com/kb/ht1564
If thyis leads to the computer booting, you can restart without holding the shift key down.

Lightroom CC wont startup after installation on mac

lightroom CC wont startup after installation on both my mac's, it only hows a splash screen at startup.
I have tried to restart the computer
Anybody know what to do ?

I'm having the same issue and the log out and back in trick is not working for me.
I've just installed and when I try and launch the application, i see the splash screen for a split second and then the application crashes.
It is happening on both of my Retina MacBook Pros.
One is: Late 2013 Retina 15" MBP - 2.6 i7 - 16GB RAM - 1TB SSD - NVIDIA GeForce GT 750M 2GB
The other is Early 2013 Retina 15" MBP - 2.7 i7 - 16GB RAM - 256 SSD - NVIDIA GeForce GT 650M 1GB
Same behavior on both.
I've uninstalled and reinstalled. I've trashed pref files. Not sure what else to do.

My wifi suddenly wont work on my i4s. i already reset network, forget network, restart, and put it in the refrigerator (coz some people said maybe theres something wrong with the heat of wifi inside ). what should i do?

my wifi suddenly wont work on my i4s. i already reset network, forget network, restart, and put it in the refrigerator (coz some people said maybe theres something wrong with the heat of wifi inside ). what should i do?
but sometimes, it can read,but wont connect.
sometimes it even wont read the wifi .
sometimes, when it can connect, the password already correct, but it didnt want to connect.
it suddenly happened, without i changed the seeetinggs or else.
i read every solutiuon on google., etc2, and tried the way, but it still wont work.
anyone can help ? pleasee ;(

This is a totally absurd suggestion, except that it worked for me with my iPad. Forget the network, then when asked for the password, enter a wrong one. Try again and enter the correct password. Good luck.

Audition 3.01 suddenly wont startup

Similar Messages

Maybe you are looking for