Audition 3.1 disappeared

Hi all,
Audition 3.1 has disappeared off my backup laptop. The same version on my main desktop studio computer is still working fine.
I rarely use the laptop unless I am doing location recordings etc. A couple of weeks ago I tried to open it up and a message came up
saying something like 'Audition not installed properly - reinstall'. I tried to reinstall and then got a message that the program was already
installed and to uninstall it first. Ok, so I go to the control panel (windows computer) >uninstall a program etc.. Adobe Audition does not
appear on the list of installed programs. Tried re-installing again and get the same message - grrr. Now I am totally confused. Can't open it
because it's apparently not installed properly (been working ok on this machine for about 3 years), can't re-install because it's apparently
already installed, can't uninstall because it doesn't show up on the list of installed programs. Any body had this problem.

Some information about clearing Audition 3 from earlier install here. But please also note that you will probably have to follow the link to be able to get the serial number and a version of AA3 that you will be able to re-install.
Audition 3 and the activation service

Similar Messages

My adobe audition app I have payed disappeared so I had t uinstall the program and need to help to get it back: have tried to download it again but it dont work! This has happend twice now.

Hallo! I ned help to get my adobe audition app as I have payed for back to my computer. I had to uinstall the program also creative cloud since I didnt have the audition app any longer? This has happend before and I like have my money back as I have payed for it or help from tthe adobe team to install it again with the app.
Thank you for help
Lise Tollefsen Slembe

Does your Cloud subscription show on your account page?
https://www.adobe.com/account.html for subscriptions on your Adobe page
Some general information for a Cloud subscription
Log out of your Cloud account... Restart your computer... Log in to your paid Cloud account
-Sign in help http://helpx.adobe.com/x-productkb/policy-pricing/account-password-sign-faq.html
-http://helpx.adobe.com/x-productkb/policy-pricing/activation-network-issues.html
-http://helpx.adobe.com/creative-suite/kb/trial--1-launch.html

Mac Running Slow/Cursor Disappears

As a recent convert, I am not sure what should be running and what should not. I copied the below from my last log in and am hoping someone can take a look and tell me if something is running that shouldn't be running. I know this is not a short list of processes, so I very much appreciate everyone's time and help!
Jul 4 16:30:12 localhost kernel[0]: npvhash=4095
Jul 4 16:30:11 localhost com.apple.launchctl.System[2]: launchctl: Please convert the following to launchd: /etc/mach_init.d/dashboardadvisoryd.plist
Jul 4 16:30:11 localhost com.apple.launchd[1] (com.apple.blued): Unknown key for boolean: EnableTransactions
Jul 4 16:30:11 localhost com.apple.launchd[1] (com.apple.usbmuxd): Unknown key for boolean: EnableTransactions
Jul 4 16:30:11 localhost com.apple.launchd[1] (org.cups.cupsd): Unknown key: SHAuthorizationRight
Jul 4 16:30:11 localhost com.apple.launchd[1] (org.x.privileged_startx): Unknown key for boolean: EnableTransactions
Jul 4 16:30:12 localhost kextd[10]: 432 cached, 0 uncached personalities to catalog
Jul 4 16:30:12 localhost kernel[0]: hi mem tramps at 0xffe00000
Jul 4 16:30:12 localhost kernel[0]: PAE enabled
Jul 4 16:30:12 localhost kernel[0]: 64 bit mode enabled
Jul 4 16:30:12 localhost kernel[0]: Darwin Kernel Version 9.7.0: Tue Mar 31 22:52:17 PDT 2009; root:xnu-1228.12.14~1/RELEASE_I386
Jul 4 16:30:12 localhost kernel[0]: standard timeslicing quantum is 10000 us
Jul 4 16:30:12 localhost kernel[0]: vmpagebootstrap: 508313 free pages and 15975 wired pages
Jul 4 16:30:12 localhost kernel[0]: migtable_maxdispl = 79
Jul 4 16:30:12 localhost kernel[0]: 98 prelinked modules
Jul 4 16:30:12 localhost kernel[0]: AppleACPICPU: ProcessorApicId=0 LocalApicId=0 Enabled
Jul 4 16:30:12 localhost kernel[0]: AppleACPICPU: ProcessorApicId=1 LocalApicId=1 Enabled
Jul 4 16:30:12 localhost kernel[0]: Loading security extension com.apple.security.TMSafetyNet
Jul 4 16:30:12 localhost kernel[0]: calling mpopolicyinit for TMSafetyNet
Jul 4 16:30:12 localhost kernel[0]: Security policy loaded: Safety net for Time Machine (TMSafetyNet)
Jul 4 16:30:12 localhost kernel[0]: Loading security extension com.apple.nke.applicationfirewall
Jul 4 16:30:12 localhost kernel[0]: Loading security extension com.apple.security.seatbelt
Jul 4 16:30:12 localhost kernel[0]: calling mpopolicyinit for mb
Jul 4 16:30:12 localhost kernel[0]: Seatbelt MACF policy initialized
Jul 4 16:30:12 localhost kernel[0]: Security policy loaded: Seatbelt Policy (mb)
Jul 4 16:30:12 localhost kernel[0]: Copyright (c) 1982, 1986, 1989, 1991, 1993
Jul 4 16:30:12 localhost kernel[0]: The Regents of the University of California. All rights reserved.
Jul 4 16:30:12 localhost kernel[0]: MAC Framework successfully initialized
Jul 4 16:30:12 localhost kernel[0]: using 10485 buffer headers and 4096 cluster IO buffer headers
Jul 4 16:30:12 localhost kernel[0]: IOAPIC: Version 0x20 Vectors 64:87
Jul 4 16:30:12 localhost kernel[0]: ACPI: System State [S0 S3 S4 S5] (S3)
Jul 4 16:30:12 localhost kernel[0]: mbinit: done
Jul 4 16:30:12 localhost kernel[0]: Security auditing service present
Jul 4 16:30:12 localhost kernel[0]: BSM auditing present
Jul 4 16:30:12 localhost kernel[0]: rooting via boot-uuid from /chosen: 6BCD18CB-5278-3F51-B658-D240C1F448B8
Jul 4 16:30:12 localhost kernel[0]: Waiting on <dict ID="0"><key>IOProviderClass</key><string ID="1">IOResources</string><key>IOResourceMatch</key><string ID="2">boot-uuid-media</string></dict>
Jul 4 16:30:12 localhost kernel[0]: BTCOEXIST on
Jul 4 16:30:12 localhost kernel[0]: wl0: Broadcom BCM4328 802.11 Wireless Controller
Jul 4 16:30:12 localhost kernel[0]: 5.10.38.35
Jul 4 16:30:12 localhost kernel[0]: FireWire (OHCI) Lucent ID 5811 built-in now active, GUID 002241fffef5a336; max speed s400.
Jul 4 16:30:12 localhost kernel[0]: Got boot device = IOService:/AppleACPIPlatformExpert/PCI0/AppleACPIPCI/SATA@1F,2/AppleICH8AHCI/PR T0@0/IOAHCIDevice@0/AppleAHCIDiskDriver/IOAHCIBlockStorageDevice/IOBlockStorageD river/Hitachi HTS542516K9SA00 Media/IOGUIDPartitionScheme/Customer@2
Jul 4 16:30:12 localhost kernel[0]: BSD root: disk0s2, major 14, minor 2
Jul 4 16:30:12 localhost kernel[0]: Jettisoning kernel linker.
Jul 4 16:30:12 localhost kernel[0]: Resetting IOCatalogue.
Jul 4 16:30:12 localhost kernel[0]: GFX0: family specific matching fails
Jul 4 16:30:12 localhost kernel[0]: display: family specific matching fails
Jul 4 16:30:12 localhost kernel[0]: Matching service count = 1
Jul 4 16:30:12 localhost kernel[0]: Matching service count = 3
Jul 4 16:30:12: --- last message repeated 4 times ---
Jul 4 16:30:12 localhost kernel[0]: Matching service count = 4
Jul 4 16:30:12 localhost kernel[0]: display: family specific matching fails
Jul 4 16:30:12 localhost kernel[0]: Previous Shutdown Cause: 5
Jul 4 16:30:12 localhost kernel[0]: AppleTyMCEDriver::probe(MacBook4,1)
Jul 4 16:30:12 localhost kernel[0]: AppleTyMCEDriver::probe fails
Jul 4 16:30:12 localhost kernel[0]: GFX0: family specific matching fails
Jul 4 16:30:12 localhost kernel[0]: IntelMemory::init
Jul 4 16:30:12: --- last message repeated 1 time ---
Jul 4 16:30:12 localhost kernel[0]: InitPool: offset= 0x08000000 size = 0x08000000
Jul 4 16:30:12 localhost kernel[0]: fRegisters at 0x3bcd2000
Jul 4 16:30:13 localhost kernel[0]: AppleIntelCPUPowerManagement: initialization complete
Jul 4 16:30:15 localhost kernel[0]: [Bluetooth::CSRHIDTransition] switchToHCIMode (legacy)
Jul 4 16:30:15 localhost kernel[0]: AppleYukon2: Marvell Yukon Gigabit Adapter 88E8055 Singleport Copper SA
Jul 4 16:30:15 localhost kernel[0]: AppleYukon2: RxRingSize <= 1024, TxRingSize 256, RXMAXLE 1024, TXMAXLE 768, STMAXLE 3328
Jul 4 16:30:16 localhost kernel[0]: [Bluetooth::CSRHIDTransition] transition complete.
Jul 4 16:30:16 localhost kernel[0]: [HCIController][configurePM] power parent ready after 1 tries
Jul 4 16:30:16 localhost bootlog[36]: BOOT_TIME: 1246743008 0
Jul 4 16:30:16 localhost rpc.statd[18]: statd.notify - no notifications needed
Jul 4 16:30:18 localhost kernel[0]: IPv6 packet filtering initialized, default to accept, logging disabled
Jul 4 16:30:18 localhost fseventsd[27]: bumping event counter to: 0x14d7bd1 (current 0x0) from log file '00000000014ccd3b'
Jul 4 16:30:18 localhost DirectoryService[32]: Launched version 5.7 (v514.25)
Jul 4 16:30:18 localhost /System/Library/CoreServices/loginwindow.app/Contents/MacOS/loginwindow[23]: Login Window Application Started -- Threaded auth
Jul 4 16:30:19 localhost kernel[0]: yukon: Ethernet address 00:22:41:3a:30:67
Jul 4 16:30:19 localhost kernel[0]: AirPort_Brcm43xx: Ethernet address 00:23:12:03:5d:b6
Jul 4 16:30:19 localhost blued[44]: Apple Bluetooth daemon started.
Jul 4 16:30:19 localhost mDNSResponder mDNSResponder-176.3 (Sep 30 2008 16:59:38)[22]: starting
Jul 4 16:30:19 localhost com.apple.usbmuxd[14]: usbmuxd-167 built for iTunesEightTwo on May 11 2009 at 13:36:48, running 32 bit
Jul 4 16:30:21 localhost /usr/sbin/ocspd[57]: starting
Jul 4 16:30:22 localhost kernel[0]: AirPort: Link Down on en1
Jul 4 16:30:23 robert-thorels-macbook configd[34]: setting hostname to "robert-thorels-macbook.local"
Jul 4 16:30:27 robert-thorels-macbook com.apple.SystemStarter[16]: Starting HP IO Monitor
Jul 4 16:30:27 robert-thorels-macbook com.apple.SystemStarter[16]: /Applications/VirtualBox.app/Contents/MacOS/VBoxDD2GC.gc => /Applications/VirtualBox.app/Contents/MacOS/VBoxDD2GC.gc-x86
Jul 4 16:30:27 robert-thorels-macbook com.apple.SystemStarter[16]: Starting HP Trap Monitor
Jul 4 16:30:27 robert-thorels-macbook com.apple.SystemStarter[16]: /Applications/VirtualBox.app/Contents/MacOS/VBoxDDGC.gc => /Applications/VirtualBox.app/Contents/MacOS/VBoxDDGC.gc-x86
Jul 4 16:30:27 robert-thorels-macbook com.apple.SystemStarter[16]: /Applications/VirtualBox.app/Contents/MacOS/VBoxHeadless => /Applications/VirtualBox.app/Contents/MacOS/VBoxHeadless-x86
Jul 4 16:30:27 robert-thorels-macbook com.apple.SystemStarter[16]: /Applications/VirtualBox.app/Contents/MacOS/VBoxManage => /Applications/VirtualBox.app/Contents/MacOS/VBoxManage-x86
Jul 4 16:30:27 robert-thorels-macbook com.apple.SystemStarter[16]: /Applications/VirtualBox.app/Contents/MacOS/VBoxNetAdpCtl => /Applications/VirtualBox.app/Contents/MacOS/VBoxNetAdpCtl-x86
Jul 4 16:30:27 robert-thorels-macbook com.apple.SystemStarter[16]: /Applications/VirtualBox.app/Contents/MacOS/VBoxNetDHCP => /Applications/VirtualBox.app/Contents/MacOS/VBoxNetDHCP-x86
Jul 4 16:30:27 robert-thorels-macbook com.apple.SystemStarter[16]: /Applications/VirtualBox.app/Contents/MacOS/VBoxSVC => /Applications/VirtualBox.app/Contents/MacOS/VBoxSVC-x86
Jul 4 16:30:27 robert-thorels-macbook com.apple.SystemStarter[16]: /Applications/VirtualBox.app/Contents/MacOS/VBoxXPCOMIPCD => /Applications/VirtualBox.app/Contents/MacOS/VBoxXPCOMIPCD-x86
Jul 4 16:30:27 robert-thorels-macbook com.apple.SystemStarter[16]: /Applications/VirtualBox.app/Contents/MacOS/VMMGC.gc => /Applications/VirtualBox.app/Contents/MacOS/VMMGC.gc-x86
Jul 4 16:30:27 robert-thorels-macbook com.apple.SystemStarter[16]: /Applications/VirtualBox.app/Contents/MacOS/VirtualBox => /Applications/VirtualBox.app/Contents/MacOS/VirtualBox-x86
Jul 4 16:30:27 robert-thorels-macbook com.apple.SystemStarter[16]: /Applications/VirtualBox.app/Contents/MacOS/VirtualBoxVM => /Applications/VirtualBox.app/Contents/MacOS/VirtualBoxVM-x86
Jul 4 16:30:27 robert-thorels-macbook com.apple.SystemStarter[16]: /Applications/VirtualBox.app/Contents/MacOS/vboxwebsrv => /Applications/VirtualBox.app/Contents/MacOS/vboxwebsrv-x86
Jul 4 16:30:27 robert-thorels-macbook com.apple.SystemStarter[16]: Loading VBoxDrv.kext
Jul 4 16:30:27 robert-thorels-macbook com.apple.SystemStarter[16]: kextload: /Library/Extensions/VBoxDrv.kext loaded successfully
Jul 4 16:30:28 robert-thorels-macbook kernel[0]: display: Not usable
Jul 4 16:30:27 robert-thorels-macbook com.apple.SystemStarter[16]: Loading VBoxUSB.kext
Jul 4 16:30:28 robert-thorels-macbook kernel[0]: vboxdrv: fAsync=0 offMin=0x90c offMax=0x1704
Jul 4 16:30:28 robert-thorels-macbook kernel[0]: VBoxDrv: version 2.2.2 r46594; IOCtl version 0xa0009; IDC version 0x10000; dev major=18
Jul 4 16:30:28 robert-thorels-macbook com.apple.SystemStarter[16]: kextload: /Library/Extensions/VBoxUSB.kext loaded successfully
Jul 4 16:30:28 robert-thorels-macbook com.apple.SystemStarter[16]: Loading VBoxNetFlt.kext
Jul 4 16:30:28 robert-thorels-macbook kernel[0]: Auth result for: 00:18:39:e9:7e:e4 MAC AUTH succeeded
Jul 4 16:30:28 robert-thorels-macbook com.apple.SystemStarter[16]: kextload: /Library/Extensions/VBoxNetFlt.kext loaded successfully
Jul 4 16:30:28 robert-thorels-macbook kernel[0]: AirPort: Link Up on en1
Jul 4 16:30:28 robert-thorels-macbook com.apple.SystemStarter[16]: Loading VBoxNetAdp.kext
Jul 4 16:30:28 robert-thorels-macbook kernel[0]: VBoxFltDrv: version 2.2.2 r46594
Jul 4 16:30:28 robert-thorels-macbook com.apple.SystemStarter[16]: kextload: /Library/Extensions/VBoxNetAdp.kext loaded successfully
Jul 4 16:30:28 robert-thorels-macbook kernel[0]: VBoxAdpDrv: version 2.2.2 r46594
Jul 4 16:30:28 robert-thorels-macbook ReportCrash[118]: Formulating crash report for process HPIO Trap Monitor[102]
Jul 4 16:30:29 robert-thorels-macbook loginwindow[23]: Login Window Started Security Agent
Jul 4 16:30:29 robert-thorels-macbook ReportCrash[118]: Saved crashreport to /Library/Logs/CrashReporter/HPIO Trap Monitor2009-07-04-163028robert-thorels-macbook.crash using uid: 0 gid: 0, euid: 0 egid: 0
Jul 4 16:30:29 robert-thorels-macbook kextd[10]: writing kernel link data to /var/run/mach.sym
Jul 4 16:30:29 robert-thorels-macbook SecurityAgent[173]: NSExceptionHandler has recorded the following exception:\nNSRangeException -- * -[NSCFArray objectAtIndex:]: index (0) beyond bounds (0)\nStack trace: 0x3719a 0x902ace3b 0x951d3e8b 0x951d3eca 0x91d4efdf 0x91ccc798 0x708b9 0x710f8 0x5a545 0x6eb76 0x6270a 0x63a59 0x654de 0x63291 0x61dbf 0x67722 0x7777e 0xd648 0x12c40 0x129f3 0xd18a 0x91d0bda3 0x951361c5 0x9515a888 0x9515ac78 0x92dc428c 0x92dc40a5 0x92dc3f19 0x930ecd0d 0x930ec5c0 0x930e55fb 0x10fc7 0x202a 0x1
Jul 4 16:30:35 robert-thorels-macbook authorizationhost[172]: MechanismInvoke 0x124c00 retainCount 2
Jul 4 16:30:35 robert-thorels-macbook SecurityAgent[173]: MechanismInvoke 0x101680 retainCount 1
Jul 4 16:30:35 robert-thorels-macbook SecurityAgent[173]: NSSecureTextFieldCell detected a field editor ((null)) that is not a NSTextView subclass designed to work with the cell. Ignoring...
Jul 4 16:30:35 robert-thorels-macbook SecurityAgent[173]: NSExceptionHandler has recorded the following exception:\nNSRangeException -- * -[NSCFArray objectAtIndex:]: index (0) beyond bounds (0)\nStack trace: 0x3719a 0x902ace3b 0x951d3e8b 0x951d3eca 0x91d4efdf 0x91ccc798 0x708b9 0x710f8 0x5a545 0x6eb76 0x6270a 0x65a86 0x6779f 0x7777e 0xd648 0x12c40 0x129f3 0xd18a 0x91d0bda3 0x951361c5 0x9515a888 0x9515ac78 0x92dc428c 0x92dc40a5 0x92dc3f19 0x930ecd0d 0x930ec5c0 0x930e55fb 0x10fc7 0x202a 0x1
Jul 4 16:30:35 robert-thorels-macbook loginwindow[23]: Login Window - Returned from Security Agent
Jul 4 16:30:35 robert-thorels-macbook SecurityAgent[173]: MechanismDestroy 0x101680 retainCount 1
Jul 4 16:30:35 robert-thorels-macbook authorizationhost[172]: MechanismDestroy 0x124c00 retainCount 2
Jul 4 16:30:35 robert-thorels-macbook loginwindow[23]: USER_PROCESS: 23 console
Jul 4 16:30:35 robert-thorels-macbook com.apple.launchd[1] (com.apple.UserEventAgent-LoginWindow[167]): Exited: Terminated
Jul 4 16:30:35 robert-thorels-macbook com.apple.launchd[62] (com.apple.AirPortBaseStationAgent): Unknown key for boolean: EnableTransactions
Jul 4 16:30:35 robert-thorels-macbook com.apple.launchd[62] (org.x.startx): Unknown key for boolean: EnableTransactions
Jul 4 16:30:38 robert-thorels-macbook com.apple.FolderActions.enabled[177]: launchctl: Error unloading: com.apple.FolderActions.folders
Jul 4 16:30:40 robert-thorels-macbook Dock[185]: _DESCRegisterDockExtraClient failed 268435459
Jul 4 16:30:43 robert-thorels-macbook /System/Library/CoreServices/coreservicesd[43]: SFLSharePointsEntry::CreateDSRecord: dsCreateRecordAndOpen(Robert Thorel's Public Folder) returned -14135
Jul 4 16:30:56 robert-thorels-macbook iAntiVirus[205]: iAntiVirus(205,0xb0103000) malloc: free_garbage: garbage ptr = 0x10155a0, has non-zero refcount = 1
Jul 4 16:30:56 robert-thorels-macbook [0x0-0x15015].com.pctools.iAntiVirus[205]: iAntiVirus(205,0xb0103000) malloc: free_garbage: garbage ptr = 0x10155a0, has non-zero refcount = 1
Jul 4 16:30:56 robert-thorels-macbook [0x0-0x15015].com.pctools.iAntiVirus[205]: iAntiVirus(205,0xb0103000) malloc: free_garbage: garbage ptr = 0x101c1b0, has non-zero refcount = 1
Jul 4 16:30:56 robert-thorels-macbook [0x0-0x15015].com.pctools.iAntiVirus[205]: iAntiVirus(205,0xb0103000) malloc: free_garbage: garbage ptr = 0x10235d0, has non-zero refcount = 1
Jul 4 16:30:56 robert-thorels-macbook [0x0-0x15015].com.pctools.iAntiVirus[205]: iAntiVirus(205,0xb0103000) malloc: free_garbage: garbage ptr = 0x10364d0, has non-zero refcount = 1
Jul 4 16:30:56 robert-thorels-macbook [0x0-0x15015].com.pctools.iAntiVirus[205]: iAntiVirus(205,0xb0103000) malloc: free_garbage: garbage ptr = 0x104a000, has non-zero refcount = 1
Jul 4 16:30:56 robert-thorels-macbook iAntiVirus[205]: iAntiVirus(205,0xb0103000) malloc: free_garbage: garbage ptr = 0x101c1b0, has non-zero refcount = 1
Jul 4 16:30:56 robert-thorels-macbook iAntiVirus[205]: iAntiVirus(205,0xb0103000) malloc: free_garbage: garbage ptr = 0x10235d0, has non-zero refcount = 1
Jul 4 16:30:56 robert-thorels-macbook iAntiVirus[205]: NSWindow does not support nonactivating panel styleMask 0x80
Jul 4 16:30:56 robert-thorels-macbook iAntiVirus[205]: iAntiVirus(205,0xb0103000) malloc: free_garbage: garbage ptr = 0x10364d0, has non-zero refcount = 1
Jul 4 16:30:56 robert-thorels-macbook iAntiVirus[205]: NSPanel does not support NSUnifiedTitleAndToolbarWindowMask in a utility window
Jul 4 16:30:56 robert-thorels-macbook iAntiVirus[205]: iAntiVirus(205,0xb0103000) malloc: free_garbage: garbage ptr = 0x104a000, has non-zero refcount = 1
Jul 4 16:30:58 robert-thorels-macbook /System/Library/CoreServices/SystemUIServer.app/Contents/MacOS/SystemUIServer[1 91]: CPSGetProcessInfo(): This call is deprecated and should not be called anymore.
Jul 4 16:30:58 robert-thorels-macbook /System/Library/CoreServices/SystemUIServer.app/Contents/MacOS/SystemUIServer[1 91]: CPSPBGetProcessInfo(): This call is deprecated and should not be called anymore.
Jul 4 16:31:06 robert-thorels-macbook [0x0-0x16016].com.apple.systemevents[208]: com.apple.FolderActions.enabled: Already loaded
Jul 4 16:31:08 robert-thorels-macbook iAntiVirus[205]: iAntiVirus(205,0xb0103000) malloc: free_garbage: garbage ptr = 0x104a9d0, has non-zero refcount = 1
Jul 4 16:31:08 robert-thorels-macbook [0x0-0x15015].com.pctools.iAntiVirus[205]: iAntiVirus(205,0xb0103000) malloc: free_garbage: garbage ptr = 0x104a9d0, has non-zero refcount = 1
Jul 4 16:31:33 robert-thorels-macbook kernel[0]: WLCE_COUNTRY_CODECHANGED
Jul 4 16:31:33 robert-thorels-macbook kernel[0]: en1: 802.11d country code set to 'US'.
Jul 4 16:31:33 robert-thorels-macbook kernel[0]: en1: Supported channels 1 2 3 4 5 6 7 8 9 10 11 5 6 7 8 9 10 11 1 2 3 4 5 6 7 36 40 44 48 52 56 60 64 149 153 157 161 165 40 48 56 64 153 161 36 44 52 60 149 157
Jul 4 16:31:42 robert-thorels-macbook [0x0-0x17017].org.mozilla.firefox[209]: Debugger() was called!
Jul 4 16:45:47 robert-thorels-macbook [0x0-0x20020].com.apple.systempreferences[247]: Unexpected reply from backup server - ignored
Jul 4 16:45:47 robert-thorels-macbook [0x0-0xd00d].com.apple.finder[193]: Unexpected reply from backup server - ignored
Jul 4 16:45:47 robert-thorels-macbook [0x0-0xc00c].com.apple.systemuiserver[191]: Unexpected reply from backup server - ignored

I didn't realize I was running VirtualBox. So, perhaps that's the problem. I uninstalled it to see if there is any correction. What was happening was that the cursor or arrow would simply disappear for 3-5 seconds when a page was loading in Firefox, or when I was saving a small document. If I moved the cursor while it was gone (to try to find it), it took even longer.
I'll give this a shot and post back with any results. Thanks for your help.
Btw, I noticed the "garbage" comment in the log, too. Thought that was funny! Although new to the OS, I love the Mac.
Thanks again.

Audit Vault Installation problem on windows platform

Hello!
I'm trying to install Audit Vault 10.2.2 on windows platform. The installation procedure is successfull (there are no alerts about errors during installation). The enterprise manager is working at http://localhost:1158/em without any problem.
The installation guide says that audit vault console should work at http://localhost:5700/av, but this site is unreachable.
I tried to find out the problem, so I started avctl show_av_status
The result is:
Exception in thread "main" java.lang.Exception: Invalid Oracle JDBC url
at oracle.av.avca.Commandarguments.setOracleProperties (Commandarguments.java:281)
at oracle.av.avca.Commandarguments.processArguments(CommandArguments.java:667)
at oracle.av.avca.Avctl.startCTL(Avctl.java:70)
at oracle.av.avca.Avctl.main(Avctl.java:318)
(avctl start_av results the same problem)
Could you help me to solve this problem? Please!

I'd like to help you but it seems to me, from the perspective of the purpose of Audit Vault, that putting a secure repository on top of an insecure operating system is a non sequitur.
Thus all of my installs have been on Oracle Enterprise Linux and I've never seen any installation-related issues such as you are reporting.
If you can I would suggest getting, as they say, "a real operating system."
Performance will improve, hardware utilization will improve, security will improve, and as an additional advantage, this issue will disappear.

CC apps PS, Ill, Premiere open and disappear in a few secs?

I had CS5 Production, and CS6 Design installed in Windows 7. Tried a new project in Premiere after 2 years of not using, and found it hung up and would not reopen after closing, unless I restarted Windows. Used Torrents to download Premiere CC 7 from Ching Lui. Yes, I realize this is a ripped off file. It installed and worked beautifully, but PS and Illus CS6 would open and shut down after 15 secs or so. I uninstalled the ripped file Premiere CC7, all CS5 and all CS6, ran virus scan and found nothing. Then I joined CC subscription for 1 year and downloaded Pr, Illus, PS, Acrobat, Audition. They all open for about 15 seconds and then shut themselves down. With PS I get to where I am in the "open a file" screen, and when I click on the file, PS disappears. In task manager the products show as running, and then disappear. Other software like Word works fine, and this seems to be a problem with Adobe products only. How do I solve this issue? Thank you.

I checked the activation forum, and this is not an activation issue. I have previously activated both CS5 and CS6, and they have suddenly stopped working. CC has the same issue. It downloaded the software fine, but then it would flash quickly and shut down.
I did a system restore from my backup, to before the time I installed the ripped Premiere 7. Now CS5 and CS6 show up again, but won't open. They will not uninstall, giving an error message when I try it. This is probably because I uninstalled them when the problem showed up, and system restore does not put things back perfectly. So I reinstalled CS6 after the system restore.
Still, nothing will run. For example, PS opens, then I can go to the open file screen, browse and pick a photo, and it flashes up for a second and the program shuts down. I can only assume that the ChingLui rip removed or installed something, and I was hoping someone else has heard of this problem and dealt with it. I am now a subscriber to CC and I would like to see it start working. Thanks for any help you can give.

Unable to install Audition 3.0 on Windows 7.

I have been trying to install Audition 3.0 on my Windows 7 computer with no luck. It unpacks all of the files and then asks what language I want the installer to us. When I click on English that box disappears and another box appears on the screen for about half-a-second, too fast to read, and the computer just sits there.
I've read all of the messages about similar problems on this board and the suggestions offered are all things I've tried with no success.
Any suggestions would be greatly appreciated.

Hi and welcome to Discussions,
the BootCamp Drivers 3.0 are on the OSX 10.6 Snow Leopard Install DVD.
Since your signature states "OSX 10.6.4" I assume that you have such one 'lying around'.
Just insert the DVD while in WIndows and the Driver setup should start automatically.
The 3.1 Driver download is indeed an update only and only works when the 3.0 Drivers are already installed.
Regards
Stefan

Field value disappeared when saved in Quick Sales Order form

HI,
We have developed a custom form which is similar to the Find Customer Search form in Quick Sales Order form (Navigate to Tools --> Find Customer).
The custom form searches Customer and populates the selected customer details in Quick Sales Order form (populating the values in Quick Sales Order form is handled in Custom.pll).
When we select Bill to or Ship to Contact in the Quick Sales Order form and save the Order, the Bill to and Ship to Contacts are disappeared (If the Bill to and Ship to Sites are not Primary).
Can anyone please help me on this...
Thanks.

Check if 'Audit Trail' is setup in OM Parameters for the OU.
Also check if "Processing Constraints" are setup correctly.
For Qty reduction we need to add a new row called "delete".
Thanks
-Arif.

Sound disappeared from Sample Editor?

Can anyone help? The sound has completely disappeared from my Sample Editor window and also the Audio bin.
I can't audition any loops in the list now, but if I drag them to a track in the main Arrange page they play fine. Then double clicking on that Audio loop or any audio clip in Arrange to bring it up in the Sample Editor window shows the waveform okay, but playing it just goes through the motions with the cursor moving as normal but no sound. Dead. Nada.
Is it me? I am not a novice with Logic but I can't work this out. I tried throwing away the preference files in Library/Prefs but nothing doing.
Any help would be appreciated as I can't edit in Logic now like this.
Cheers
Musolen

Well thanks again Chorleyman,
I have had a play around and added another Audio strip in the Environment, set it to Output No.256 (The highest) and the Sound in the Sample Editor came straight back on. It's still called Audio and not PreListen, I can't seem to rename that, but it works now so I have my solution.
Thanks again for the advice and to everyone else reading this and mulling it over.
Cheers,
Musolen.

Permissions Randomly Disappearing/Reverting in SharePoint 2010

Hi everyone,
A couple of our SharePoint team sites have been experiencing an unusual phenomenon where user permissions randomly disappear or revert--all seemingly without any user involvement. I have inspected the Security Audit Logs for the past months, scouring permissions
activity surrounding these events, but I have not been able to identify any user involvement that could have caused or even contributed to these issues.
One site had a folder whose entire permissions setting became blank. Another site's group ownership reverted to a previous user who moved to a different department several months ago.
We do occasionally restore corrupted Sharepoint items from our DPM backups, but these particular sites and items have not been restored.
I have been reading through several forums and online resources, but I haven't found anything definitive. Any help would be greatly appreciated. Thanks!

Enable Site Collection Auditing on the Site Collection (in Site Settings). There is an option to record change in user permissions/groups. You may also want the Edit Items option.
This should give you a better idea of what is going on next time this happens.
What patch level is your farm at?
Trevor Seward
Follow or contact me at...
This post is my own opinion and does not necessarily reflect the opinion or view of Microsoft, its employees, or other MVPs.

What is in the Audition 3.0.1 bugfix?

Changes in Adobe Audition 3.0.1:
• Spectral tools no longer crash machines with more than four CPU cores.
• The Graphic Phase Shifter effect has been re-enabled.
• Performance while recording MIDI data has been improved.
• The Sequencer will now record MIDI data even if the panel is closed.
• Adobe Audition will now launch on Windows Vista® systems where the My Documents folder was moved from the default location.
• The application will now ignore Windows "Locale" settings to format decimal data in comma-delimited XML settings files.
• A Healing Brush crash issue has been addressed.
• Cross-fades are no longer incorrectly added to grouped clips when overlapped with non-grouped clips.
• Invalid cross-fades will no longer be added to the end of a previously trimmed clip after enabling or disabling looping.
• Invalid cross-fades for clips after enabling non-session tempo-based looping have been addressed.
• Dragging cross-faded clips onto the master track no longer creates two additional tracks and an error in the cross-fades.
• Inserting MIDI from the Files panel would cause the application to hang in Edit mode for an audio file whose sample rate didn't match the session.
• Several scenarios where cross-fade changes could corrupt a session were addressed.
• Closing a session without exiting the rewire app no longer causes Adobe Audition to save a blank session.
• Undo no longer becomes disabled after undoing the creation of unique copies of two cross-faded clips.
• Cross-faded clips no longer disappear after undoing move clips.
• Cancelling VST scan no longer causes Adobe Audition to become unstable.
• If a selection existed, a full session mixdown would only process MIDI data through the end of the selection.
• The Open MIDI dialog box was not completely modal and could cause a crash.
• MIDI Host had problems with some Spectrasonics VSTi instruments, where it wouldn't show the entire UI.
• CD burning would sometimes create a corrupted disk but still report a successful burn.
• Applying the Clip/Pop Eliminator no longer crashes the application.
• Crash recovery is now more reliable when using Auto-Save For Recovery.
• When the application detects the possible saving failure that causes a corrupted session, a warning dialog box now appears so users can retry the save.
• Transport controls are no longer disabled if a new session is opened without closing the existing session.
• Cross-fades will now retain their original shape when clips are moved and the session is reopened.

All of the available updates for Audition 3, including the 3.0.1 bugfix, are available from here.

DNS on Server 2008 R2: DNS A records strangely disappear

Hello,
I am experiencing very strange problems with my DNS (Server 2008 R2, AD integrated). Several A records for Windows clients are missing, and even if I register them as static they somehow disappear again. However, the AAAA records are still around (IPv6 is
running in default configuration, I haven't touched that at all), but another strange thing here is, most of them are listed as STATIC records.
At present, the DHCP server is set to NOT register the clients with DNS. DNS accepts only secure updates, scavenging is disabled. (I am somewhat reluctant to disable dynamic updates on the DNS server completely because I think the DCs register and update
lots of records dynamically). When I register all missing A records, most affected clients loose it again within an hour or so but some seem be fine. It seems to me that about 20 % of the clients are affected.
I have enabled Directory Service Changes auditing, and its in fact the machine account which appears to be responsible. Clients with A records generate 10 entries (ID 5136) in the DC's security log while the problematic clients generate only the
first 5 events. So it appears to me that they can delete the record but not create a new one. All clients are set to register themselves with DNS.
As far as I remember I had Windows clients with missing A records in the past once in a while but the problem became really serious only about one and half weeks ago.
Does anyone have an idea of what might be going on here? Can I safely disable DNS dynamic updates without adversely affecting AD/DC functionality? Generally, we don't actually need dynamic updates.
Cheers, Georg.

What operating system are the clients?
I would like to first point out how registration works with static and DHCP, and the differences depending on how DHCP is configured.
=====================================================
1. By default, Windows 2000 and newer statically configured machines will
register their own A record (hostname) and PTR (reverse entry) into DNS.
2. If set to DHCP, a Windows 2000, 2003 or XP machine, will request DHCP to allow
the machine itself to register its own A (forward entry) record, but DHCP will register its PTR
(reverse entry) record.
3. If Windows 2008/Vista, or newer, the DHCP server always registers and updates client information in DNS.
   Note: "This is a modified configuration supported for DHCP servers
         running Windows Server 2008 and DHCP clients. In this mode,
         the DHCP server always performs updates of the client's FQDN,
         leased IP address information, and both its host (A) and
         pointer (PTR) resource records, regardless of whether the
         client has requested to perform its own updates."
         Quoted from, and more info on this, see:
http://technet.microsoft.com/en-us/library/dd145315(v=WS.10).aspx
4. The entity that registers the record in DNS, owns the record.
   Note "With secure dynamic update, only the computers and users you specify
        in an ACL can create or modify dnsNode objects within the zone.
        By default, the ACL gives Create permission to all members of the
        Authenticated User group, the group of all authenticated computers
        and users in an Active Directory forest. This means that any
        authenticated user or computer can create a new object in the zone.
        Also by default, the creator owns the new object and is given full control of it."
        Quoted from, and more info on this:
http://technet.microsoft.com/en-us/library/cc961412.aspx
=====================================================
Therefore, based on that, even if you have DHCP set to not register, and the clients are 2008/Vista and newer, then DHCP is doing it. That explains why you see the system account doing it.
Now, I think it will actually help you if you configure DHCP to register everything, configure credentials, and add the DHCP server computer object to the DnsUpdateProxy group. Don't add anything else to this group.
This way DHCP controls everything and it's easier to track AND more importantly, DHCP can update already registered records.
====================================================
In summary:
DHCP DNS Update summary:
- Configure DHCP Credentials.
  The credentials only need to be a plain-Jane, non-administrator, user account.
  But give it a really strong password.
- Set DHCP to update everything, whether the clients can or cannot.
- Set the zone for Secure & Unsecure Updates. Do not leave it Unsecure Only.
- Add the DHCP server(s) computer account to the Active Directory, Built-In DnsUpdateProxy security group.
  Make sure ALL other non-DHCP servers are NOT in the DnsUpdateProxy group.
  For example, some folks believe that the DNS servers or other DCs not be
  running DHCP should be in it.
  They must be removed or it won't work.
  Make sure that NO user accounts are in that group, either.
  (I hope that's crystal clear - you would be surprised how many
  will respond asking if the DHCP credentials should be in this group.)
- On Windows 2008 R2 or newer, DISABLE Name Protection.
- If DHCP is co-located on a Windows 2008 R2, Windows 2012, Windows 2012 R2,
or NEWER DC, you can and must secure the DnsUpdateProxy group by running
the following command:
  dnscmd /config /OpenAclOnProxyUpdates 0
- Configure Scavenging on ONLY one DNS server. What it scavenges will replicate to others anyway.
- Set the scavenging NOREFRESH and REFRESH values combined to be equal or greater than the DHCP Lease length.
References:
This blog covers the following:
DHCP Service Configuration, Dynamic DNS Updates, Scavenging, Static Entries, Timestamps, DnsUpdateProxy Group, DHCP Credentials, prevent duplicate DNS records, DHCP has a "pen" icon, and more...
Published by Ace Fekay, MCT, MVP DS on Aug 20, 2009 at 10:36 AM 3758 2
http://msmvps.com/blogs/acefekay/archive/2009/08/20/dhcp-dynamic-dns-updates-scavenging-static-entries-amp-timestamps-and-the-dnsproxyupdate-group.aspx
Good summary
How Dynamic DNS behaves with multiple DHCP servers on the same Domain?
http://social.technet.microsoft.com/Forums/en-US/winserverNIS/thread/e9d13327-ee75-4622-a3c7-459554319a27
Another good Summary:
Thread: "DNS problem" December 18, 2013
http://social.technet.microsoft.com/Forums/windowsserver/en-US/37b8b6b3-6cb1-496c-8492-09ded13bab18/dns-problem?forum=winserverNIS
Another good discussion that Microsoft support concurred with my settings for a poster that called in to Support, which verified my configuration suggestions in my blog are correct:
DHCP Server Not Registering A Records for Windows Clients
http://social.technet.microsoft.com/Forums/en-US/winserverNIS/thread/e4b285d6-5795-4045-83ff-3a3c793b2cfc/
Ace Fekay
MVP, MCT, MCSE 2012, MCITP EA & MCTS Windows 2008/R2, Exchange 2013, 2010 EA & 2007, MCSE & MCSA 2003/2000, MCSA Messaging 2003
Microsoft Certified Trainer
Microsoft MVP - Directory Services
Complete List of Technical Blogs: http://www.delawarecountycomputerconsulting.com/technicalblogs.php
This posting is provided AS-IS with no warranties or guarantees and confers no rights.

My timeline table disappears when i scroll down to the bottom

Hi, i have put my images on after effects and everything was going well like normal, until i uploaded my final 12-20 images (im using after effects for my final 3 minute animation for uni), when i tried to scroll down to rezize these images and to make them 2f long the timeline table disappears everytime, also i managed to see that the frames with the problem are not the normal purple colour but are a blackish grey colour... ive tried deleting the frames and re uploading them but the same problem occured. I saved my work closed down my computer and re-opened it and the problem was still there. i also tried pasting the frames into a new composition but again... same problem. Is there a way to solve this problem as this animation is due in tomoz and i need to start adding sounds on audition and premiere but the animation needs to be finished so i can sync the sounds at the correct places
Please reply
Katie x

In addition to Todd's curiousity, I'm curious about something else: is this a SEQUENCE of images, such as stop-frame animation?
If the original file names have been retained, they're probably in the order in which they were taken, and you can import the lot of them as an image sequence. To get the on-2 look you seek, you can use the resulting clip's interpret footage settings. Select the target frame rate you want, and multiply that number by two. You're all set.

Problem audit mismatch WCS/WLC for local net user

HI,
I have a problem in my WCS the audit status is mismatch for my two controllers. When I see the details of the mismatch, it is said that all my 400 users are "not present in controller".
However, I checked directly on my web interface of my controllers and my users are there (Security--> AAA--> Local Net Users). I've also checked on the WCS (ConfigureàControllersà controlerà Security à AAA -> local net user).
In both My users are present and are identical.
When i refresh config from controllers on the WCS it disappears but a week after the mismatch comes back.
If anyone can help, Thanks
Alex

Anyone able to answer this one?
We are having the same issue. We had WLC code 7.0.116.0 with WCS giving us mismatches on certain thresholds, despite the fact that the controller and the WCS configs were a match and no one made changes. We would refresh confgi from controller and a week later, the mismatch was back. It's as if there was something wrong with the WCS database. We upgraded to NCS 1.1 and are now on WLC code 7.0.230.0 and it worked for a while, but we are now randomly experiencing the same issues and then some with NCS.
We have a multi-tenant campus that has several of another organizations access points configured as friendly in NCS, but the controllers still had them as rogue and were containing them. We are also experiencing a max client count threshold that is set to 20 on the controller, but NCS is now reverting back to the default 12 value and giving off a mismatch. I don't know if there is a SQL issue with the database or not, but we service roughly 3000 users on a 5 million sq. ft. campus and some of these mismatches and failure to identify critical mismatches is starting to become a problem. Going to open a TAC case, but if anyone has any insight in the mean time, that would be helpful. Thanks!

Hiding & Making tracks inactive in AUDITION... i.e. PROTOOLS

I am just learning and starting to work with Audition CC (long time protools user), and loaded some OMF files into Audition (with REF video), and once I pull all my dialog (from the OMF's) to my dialog tracks I want to close/hide and make those original OMF tracks inactive, just like you can in protools (so you don't have a bunch of tracks open that are not in use). Please tell me this is an option in AUDITION, becuase if it is NOT, this program is virtual useless when it comes to PRO-LEVEL sound designing??? HELP!

Guys, don't get me wrong, I am a huge proponent of moving to an ALL ADOBE workflow. I have completely made the switch to PremPro (after a long stint with FINAL CUT). I am completely happy with this change as PP is a better program, utilizing much more updated technology. I am learning and trying to utilize SpeedGrade with its awesome DIRECT LINK (but it does appear to have some limitations), and I am currently working on a viable workaround to those. Over the past couple of weeks I have been "cramming" an extensive education on AUDITION (and I LOVE most aspects of it). I do feature film sound design so it is imparitive that I am working on a "robust" program (and for the most part I am seeing good things with Audition). But, when I typically work with a team of 4 to 5 different people contributing to the sound design (i.e. guys that are sending me Background sessions, Foley Sessions, dialog editing, Music/Score etc..etc), I have to import tons of tracks that are then analysed and discected in PROTOOLS (using just the parts we deem worthy to "make the final product"). Therefore (once we pull the appropriate parts from those external sessions) I can end up with 40-60 "dead" tracks inside my MASTER MIX session, and for many reasons I have to be able to hide and make these "dead" tracks INACTIVE! They will "kill" your session if you do NOT, they are a huge drain on the processors (creaing latency), and they are extremely hard to work around in your edit window (and moving them all to the bottom of the edit window is not a good option). That was my first thought as a "work-around" in AUDITION. I appologize for my mis-communication regarding AUDITION being a PRO-LEVEL product, as you have pointed out that it is used in RADIO, but I was specifically referring to feature film "SOUND DESIGN". STEVE G I am not "writing off" AUDITION at all, I want to use it and I am very interested to hear more about your idea of setting tracks to "off-line", I did try closing tracks in my "FILES" window, but once I did the files just disappeared from my session??? I do need the abillity to bring these "dead tracks" back into the session at various times (i.e. "make active"), so I am a bit confused on this issue. Any help you can push my way would be very appreciated. Again, I want to use AUDITION, and will keep working on ways to do so. But I need a solution to the very fundamental problem of not being able to hide (and make inactive) tracks for the work I do, it is a must for me before I can make the switch. BTW... I have put in a request for new features to ADOBE.

Domain Users AD group disappearing from SharePoint security

After applying SharePoint 2010 SP2 and the September 2014 cumulative update (KB 2883103) to our SP2010 farm, we've discovered the system is automatically removing the 'Domain Users' active
directory group from SharePoint security. It's not affecting any other AD groups or users or when Domain Users is a member of a SharePoint group. Only when Domain Users has been explicitly added to a site, library, list or document.
For example, we give Domain Users access to the root of most our site collections and then break inheritance for certain libraries or lists that need more security. Now Domain Users has disappeared from every site.  I can say
with 100% confidence that this has not been done by anyone in the organization.  Nothing else changed besides SP2 and Sept2014 CU.
Yesterday we fixed a few sites by re-adding Domain Users.  This morning those were missing again, so it must be a timer job or other cleanup process that is causing this. Again, this does not affect SharePoint groups/membership or any other
AD object, only Domain Users.
Has anyone ran into this issue or have any suggestions on a resolution?  We have enabled audit logging but have not seen any related logs yet.

Sometime between noon and 1:00pm this afternoon we lost the Domain Users group again from all sites where we re-added it. Audit logging is showing this for one particular site:
{072c340a-42cb-4861-a182-38102b53bc52}
{072c340a-42cb-4861-a182-38102b53bc52}
Site
System Account <SHAREPOINT\system>
2014-10-21T18:53:52
Security Role Bind Update
SharePoint
<roleid>-1</roleid><principalid>DOMAIN\domain users</principalid><scope>67A6138A-CBFA-42BD-87EF-86D558047D63</scope><operation>ensure removed</operation>
Does anyone know if any additional logging can be enabled to see WHY this is occurring?
So far our solution has been to setup another AD security group and nest the domain users security group inside. Not exactly a solution but at least a work around.

Audition 3.1 disappeared

Similar Messages

Maybe you are looking for