Audition 3 defaults
We are having major problems with Audition 3’s default settings in a multiuser environment.
We need a way of forcing Audition to always launch with certain settings i.e. Asio drivers, stereo in, 16 bit etc., but Audition 3 seems to have a mind of its own especially when installed on multiuser machines.
Can anyone suggest a way of forcing correct default settings each time Audition is launched?
Perhaps by making the audition_settings.xml and .ini files read only?
Similar Messages
-
Default domain controller policy audit
If I enable auditing in default domain controller policy, I see event only from all domain controller or see event from all workstation in domain, or I should create new audit GPO and then linked it to workstation UO?
If I enable auditing in default domain controller policy, I see event only from all domain controller or see event from all workstation in domain, or I should create new audit GPO and then linked it to workstation UO?
If I enable auditing in default domain controller policy, I see event only from all domain controller or
see event from all workstation in domain
---NO you wont see workstations, only if editing the default domain policy, as described prior best practice would be to create a new GPO with a great name that you
wont mix up such as "workstation audit GPO" and link to the site, domain or OU you require.
Its not great practise IMO adding loads of stuff to default domain policy when you want to troubleshoot best to segregate GPOS with great easy to
interpret names for brevity -
Windows 8.1 Won't get updates in audit mode.
I just installed Windows 8.1 in a Hyper-V virtual machine. The release version that was distributed through msdn not the preview. I enter audit mode as soon as I can, so there have been no changes or customization applied to the install prior to entering
audit mode. I start up windows update to search for new updates. The status is displayed as "Checking for updates..." "Most recent check for updates: Never." "Updates were installed: Never." The status never changes from "Checking
for updates...". I have even left it running over night and it still says "Checking for updates...". There is never any error message or failure. Network connectivity is functional. I have attempted an install on a physical machine as well with
the same result. If instead of entering audit mode a proceed through setting up windows and a user account, updates will work just fine. There should be an update to defender as well as an update to ie11.
I considered the possibility of a corrupt download so I compared the sha-1 hash to what is listed on the msdn download page and it does match.
Quoted from http://social.technet.microsoft.com/Forums/en-US/afc7f693-f742-402f-b513-063989b79c2f/windows-81-enterprise-windows-updates?forum=w8itproinstall.
Emphasis added.
Thank You for sharing the logs. I was able to reproduce the issue in my virtual environment. To understand more about this behavior, I engaged the Product Group and I have been informed that
this behavior is By Design. WU uses the OOBEComplete() Windows API call to determine whether OOBE is in progress or not, and if so, it will not perform automatic or UI update searches. HRESULT code 0x8024a008 is the WU error code WU_E_AU_OOBE_IN_PROGRESS.
WU automatic and UI updates won’t run while Setup reports that OOBE is still in progress. This is to prevent automatic updates from causing a system reboot during OOBE, which is – needless to say – a Very Bad Thing. This problem has always existed. Unfortunately,
when the computer is in Sysprep audit mode, Setup will report to WU that OOBE is in progress even though it might not actually be so. This is the reason that updates from WU UIs are blocked in audit mode.
I was having the same exact issue when creating an updated WDS image for deployment to select end-users for testing. At first, I thought I was doing something wrong. This process--having a VM boot into audit mode so that it can be fully updated
with Windows Updates along with new and updated third-party applications so to become the baseline/template for deployment--has worked wonderfully since the Vista days. And it worked perfectly with Windows 8. Why did Microsoft choose to deprecate
the functionality is beyond me.
Its bad enough there is so very little traction in the corporate/Gov't world for Windows 8/8.1. Now it seems that Microsoft, once again, is hades bent on destroying all that was good with Windows.
This is to prevent automatic updates from causing a system reboot during OOBE, which is – needless to say – a Very Bad Thing.
So this was a problem? Really? I don't ever recall that happening to me or ever reading about such an issue. Even if this "issue" was a problem, why not just add another switch to the sysprep command to allow admins to specify
the allowance of updates. Something like like sysprep /oobe /audit /AllowUpdates? Is that too hard or too much to ask?
So now with the current Windows-won't-update-in-audit-mode default, if I chose to deploy over 200 Windows 8.1 Enterprise clients, I now have to have ALL 200 machines contact Microsoft Update or my internal WSUS (or push via Shavlik) for updates. Regardless
of which method is used, the result is that 200 COMPUTERS must consume valuable network bandwidth for updates. Not to mention there is always several machines that never act right. Instead of having 200
identically configured machines, I end up with 200 similarly configured machines.
Exactly who is making these decisions? Has anyone experienced the OOBE update issue that Microsoft claims is such a problem?
So disappointing. -
Dear All,
I have problem with SQL Server 2008
I want add host name and ip address of client in to audit as default column.
very thanks.Dear All,
I have working with Audit Specifications in SQL Server 2008. But result cannot have HOST_NAME and IPADDRESS of Client.
This is my code:
Create Audit
USE [master]
GO
ALTER
SERVER AUDIT [Audit-20141206-090946_ControlEven]
TO
FILE
MAXSIZE
= 2 GB
GO
Create Database Audit Specification
USE [TESTAUDIT]
GO
CREATE
DATABASE AUDIT SPECIFICATION [DatabaseAuditSpecification-20141222-082141_Control]
FOR SERVER AUDIT [Audit-20141206-090946_ControlEven]
ADD (SELECT
ON OBJECT::[dbo].[tblTesting]
BY [public])
GO
This my result
Event_Time|Session_ID|Server_Principal_Name|Statement|.......|.........
But I need column HOST_NAME and IPADDRESS of Client in my result.
Thank you for your cooperation and support.
Best Regards,
Mr. Pann Matak -
URM Disposition Approval Error - Audit log
Hi there,
We have a URM environment installed and configured.
When attempting to approve a disposition action on an item in a retention schedule, the following error message appears:
"Unable to update DispositionsHistory table. Failed to check in audit log. Please reference '/appl/ucm/ContentServer/data/recordsManagement/log/##########.htm' audit log. You must save default metadata for checked in audit entries."
What is it here that we need to adjust in order to complete the approval?Hello
You have to give your audit trail default metadatas. Under Administration-Configure Records Management-Audit-CheckedIn_Audit Entries you can find the Link for "Default Metadata for Checked-in Audit Entries".
Regards -
i ask about auditing in oracle database 9i
is the auditing by default activated on it?
if the answer is no i need to activate auditing in my server
what can i do??
can i see what happen before the auditing activated??Hi Mohammad,
I would suggest you to check the below link for the details:
http://docs.oracle.com/cd/B25221_04/web.1013/b25603/auditlogging.htm#CEGFAFII
Best regards,
Rafi. -
Why doesn't Audition open when I click 'Edit Clip in Adobe Audition' in Premiere Pro CC2014?
I have been reading up on this issue and it seems like I am not the only one that this has happened to since Adobe released CC2014. The button is NOT greyed-out, just doesn't function the way it did in the original CC version; it creates an extracted file but does not send it to open with Audition and I have to manually locate the file and open it in order to edit the file.
I have already made sure that the .sesx file is set to use Adobe Audition by default but did not resolve it. Please let me know if you have a fix for this. Thanks!Hi OB,
Menu > Pages > Preferences > General
Times New Roman is one of my Custom Templates in Template Chooser.
Those settings give me that template when I launch Pages 5, also with Menu > File > New (command n).
Anything different about your set up?
Regards,
Ian.
Edit: BTW, with those preferences, New From Template Chooser no longer shows under the File Menu. Hold down the option key to see it. Ian. -
Wav on ext hdd won't play in audition when opened from file explorer
Two computers:
Lenovo thinkpad T440s with Win 8.1
Dell Precision M4600 with Win 7
Both running Audition CS5.5
Two portable USB3 external hard drives
WD Passport Ultra
WD Elements
Same problem on both computers and drives:
When I try and open and play a wav file in Audition directly from File/Windows Explorer (either by setting Audition as default prog or by right click>open with), Audition launches, but file does not appear or play. No wave form visible, just empty editor.
However it will play from external drive if I open it from within Audition (file>open).
It also plays if I copy the same file to the internal hard drive of either computer and open from File/Windows Explorer.
It also plays from external drive if I set Window Media Player as default prog. and open from File/Windows Explorer.
I would greatly appreciate any ideas on how to play a wav stored on an external drive by double clicking on it.Hi,
Which type of files have the issue? Are they also the Word and Excel files? From which client the users access the files on the server? If it is Windows 7 client, you could disable the Preview Pane and the Details Pane in Windows Explorer, on the client machine
to check the results.
Some troubleshooting steps are in the blog which could also be used in Windows Server 2012:
The Definitive 'Locked File' Post (updated 7/7/2014)
http://blogs.technet.com/b/the_microsoft_excel_support_team_blog/archive/2012/05/14/the-definitive-locked-file-post.aspx
Best Regards,
Mandy
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place. -
Severe Error: Assertion Failed: config element named "default-config"
I ran the command:
./asadmin verify-domain-xml domain1
This returned the message:
May 8, 2006 3:16:43 PM com.sun.enterprise.config.serverbeans.validation.DomainXmlVerifier invokeConfigValidator
SEVERE: /domain[1]/configs[1]: Assertion Failed: There is a config element named "default-config"
/domain[1]/resources[1]/jdbc-connection-pool[@name='PetroPool']: Warning: Assertion Failed: each jdbc-connection-pool is referenced by a jdbc-resource
I return a SEVERE and a Warning message, I googled the severe message without any luck and I was wondering if this has been troubleshooted before.
I'd appreciate any insight or instructions to correct this.
Thanks,Kedar: Thank you for the feedback, I don't remember changing any templates. Only adding a connection pool.
Here is my domain.xml:
<?xml version="1.0" encoding="UTF-8"?>
<!DOCTYPE domain PUBLIC "-//Sun Microsystems Inc.//DTD Application Server 8.0 Domain//EN" "http://www.sun.com/software/appserver/dtds/sun-domain_1_1.dtd">
<!--
Copyright 2004-2005 Sun Microsystems, Inc. All rights reserved.
Use is subject to license terms.
-->
<!-- Generated from default-domain.xml.template -->
<domain application-root="${com.sun.aas.instanceRoot}/applications" log-root="${com.sun.aas.instanceRoot}/logs">
<applications>
<j2ee-application availability-enabled="false" directory-deployed="false" enabled="true" location="${com.sun.aas.instanceRoot}/applications/j2ee-apps/MEjbApp" name="MEjbApp" object-type="system-all"/>
<j2ee-application availability-enabled="false" directory-deployed="false" enabled="true" location="${com.sun.aas.instanceRoot}/applications/j2ee-apps/__ejb_container_timer_app" name="__ejb_container_timer_app" object-type="system-all"/>
<web-module availability-enabled="false" context-root="/web1" directory-deployed="true" enabled="true" location="${com.sun.aas.installRoot}/lib/install/applications/adminapp/adminapp_war" name="adminapp" object-type="system-admin">
<!-- System Web Module - DO NOT DELETE! -->
</web-module>
<web-module availability-enabled="false" context-root="/asadmin" directory-deployed="true" enabled="true" location="${com.sun.aas.installRoot}/lib/install/applications/admingui/adminGUI_war" name="admingui" object-type="system-admin">
<!-- System Web Module - DO NOT DELETE! -->
</web-module>
<web-module availability-enabled="false" context-root="/com_sun_web_ui" directory-deployed="true" enabled="true" location="${com.sun.aas.installRoot}/lib/install/applications/com_sun_web_ui" name="com_sun_web_ui" object-type="system-admin">
<!-- System Web Module - DO NOT DELETE! -->
</web-module>
<web-module availability-enabled="false" context-root="jsfcomponents" directory-deployed="false" enabled="true" location="${com.sun.aas.instanceRoot}/applications/j2ee-modules/jsfcomponents" name="jsfcomponents" object-type="user">
<description>JSF Components Example</description>
</web-module>
</applications>
<resources>
<jdbc-resource enabled="true" jndi-name="jdbc/__TimerPool" object-type="system-admin" pool-name="__TimerPool"/>
<jdbc-resource enabled="true" jndi-name="jdbc/__default" object-type="user" pool-name="DerbyPool"/>
<jdbc-connection-pool connection-validation-method="auto-commit" datasource-classname="org.apache.derby.jdbc.EmbeddedXADataSource" fail-all-connections="false" idle-timeout-in-seconds="300" is-connection-validation-required="false" is-isolation-level-guaranteed="true" max-pool-size="32" max-wait-time-in-millis="60000" name="__TimerPool" pool-resize-quantity="2" res-type="javax.sql.XADataSource" steady-pool-size="8">
<property name="databaseName" value="${com.sun.aas.instanceRoot}/lib/databases/ejbtimer"/>
</jdbc-connection-pool>
<jdbc-connection-pool connection-validation-method="auto-commit" datasource-classname="org.apache.derby.jdbc.ClientDataSource" fail-all-connections="false" idle-timeout-in-seconds="300" is-connection-validation-required="false" is-isolation-level-guaranteed="false" max-pool-size="32" max-wait-time-in-millis="60000" name="DerbyPool" pool-resize-quantity="2" res-type="javax.sql.DataSource" steady-pool-size="8">
<property name="PortNumber" value="1527"/>
<property name="Password" value="APP"/>
<property name="User" value="APP"/>
<property name="serverName" value="localhost"/>
<property name="DatabaseName" value="sun-appserv-samples"/>
<property name="connectionAttributes" value=";create=true"/>
</jdbc-connection-pool>
<jdbc-connection-pool connection-validation-method="auto-commit" datasource-classname="oracle.jdbc.pool.OracleConnectionPoolDataSource" fail-all-connections="false" idle-timeout-in-seconds="300" is-connection-validation-required="false" is-isolation-level-guaranteed="false" max-pool-size="20" max-wait-time-in-millis="60000" name="PetroPool" pool-resize-quantity="2" res-type="javax.sql.ConnectionPoolDataSource" steady-pool-size="8">
<description>Petro 2 System Pool</description>
<property name="user" value="user"/>
<property name="port" value="1521"/>
<property name="password" value="password"/>
<property name="databaseName" value="DATABASENAME"/>
<property name="serverName" value="SERVERNAME"/>
<property name="url" value="jdbc:oracle:thin:@[IP]:1521:database"/>
<property name="datasourceName" value="url"/>
</jdbc-connection-pool>
</resources>
<configs>
<config dynamic-reconfiguration-enabled="true" name="server-config">
<http-service>
<http-listener acceptor-threads="5" address="0.0.0.0" blocking-enabled="false" default-virtual-server="server" enabled="true" family="inet" id="http-listener-1" port="8080" security-enabled="false" server-name="" xpowered-by="true">
</http-listener>
<http-listener acceptor-threads="5" address="0.0.0.0" blocking-enabled="false" default-virtual-server="server" enabled="true" family="inet" id="http-listener-2" port="8181" security-enabled="true" server-name="" xpowered-by="true">
</http-listener>
<http-listener acceptor-threads="5" address="0.0.0.0" blocking-enabled="false" default-virtual-server="__asadmin" enabled="true" family="inet" id="admin-listener" port="4848" security-enabled="false" server-name="" xpowered-by="true">
</http-listener>
<virtual-server hosts="${com.sun.aas.hostName}" http-listeners="http-listener-1,http-listener-2" id="server" log-file="${com.sun.aas.instanceRoot}/logs/server.log" state="on">
<property name="docroot" value="${com.sun.aas.instanceRoot}/docroot"/>
<property name="accesslog" value="${com.sun.aas.instanceRoot}/logs/access"/>
</virtual-server>
<virtual-server default-web-module="admingui" hosts="${com.sun.aas.hostName}" http-listeners="admin-listener" id="__asadmin" log-file="${com.sun.aas.instanceRoot}/logs/server.log" state="on">
<property name="docroot" value="${com.sun.aas.instanceRoot}/docroot"/>
<property name="accesslog" value="${com.sun.aas.instanceRoot}/logs/access"/>
</virtual-server>
</http-service>
<iiop-service client-authentication-required="false">
<orb max-connections="1024" message-fragment-size="1024" use-thread-pool-ids="thread-pool-1"/>
<iiop-listener address="0.0.0.0" enabled="true" id="orb-listener-1" port="3700" security-enabled="false"/>
<iiop-listener address="0.0.0.0" enabled="true" id="SSL" port="3820" security-enabled="true">
<ssl cert-nickname="s1as" client-auth-enabled="false" ssl2-enabled="false" ssl3-enabled="true" tls-enabled="true" tls-rollback-enabled="true"/>
</iiop-listener>
<iiop-listener address="0.0.0.0" enabled="true" id="SSL_MUTUALAUTH" port="3920" security-enabled="true">
<ssl cert-nickname="s1as" client-auth-enabled="true" ssl2-enabled="false" ssl3-enabled="true" tls-enabled="true" tls-rollback-enabled="true"/>
</iiop-listener>
</iiop-service>
<admin-service system-jmx-connector-name="system" type="das-and-server">
<!-- The JSR 160 "system-jmx-connector" -->
<jmx-connector accept-all="false" address="0.0.0.0" auth-realm-name="admin-realm" enabled="true" name="system" port="8686" protocol="rmi_jrmp" security-enabled="false"/>
<!-- The JSR 160 "system-jmx-connector" -->
<das-config admin-session-timeout-in-minutes="60" autodeploy-dir="${com.sun.aas.instanceRoot}/autodeploy" autodeploy-enabled="true" autodeploy-jsp-precompilation-enabled="false" autodeploy-polling-interval-in-seconds="2" autodeploy-verifier-enabled="false" deploy-xml-validation="full" dynamic-reload-enabled="true" dynamic-reload-poll-interval-in-seconds="2"/>
</admin-service>
<web-container/>
<ejb-container cache-idle-timeout-in-seconds="600" cache-resize-quantity="32" commit-option="B" max-cache-size="512" max-pool-size="32" pool-idle-timeout-in-seconds="600" pool-resize-quantity="8" removal-timeout-in-seconds="5400" session-store="${com.sun.aas.instanceRoot}/session-store" steady-pool-size="0" victim-selection-policy="nru">
<ejb-timer-service max-redeliveries="1" minimum-delivery-interval-in-millis="7000" redelivery-interval-internal-in-millis="5000"/>
</ejb-container>
<mdb-container idle-timeout-in-seconds="600" max-pool-size="32" pool-resize-quantity="8" steady-pool-size="0"/>
<jms-service addresslist-behavior="random" addresslist-iterations="3" default-jms-host="default_JMS_host" init-timeout-in-seconds="60" reconnect-attempts="3" reconnect-enabled="true" reconnect-interval-in-seconds="60" type="LOCAL">
<jms-host admin-password="admin" admin-user-name="admin" host="dev-energy-ora.dtnenergy.com" name="default_JMS_host" port="7676"/>
</jms-service>
<log-service alarms="false" file="${com.sun.aas.instanceRoot}/logs/server.log" log-rotation-limit-in-bytes="2000000" log-rotation-timelimit-in-minutes="0" log-to-console="false" use-system-logging="false">
<module-log-levels admin="INFO" classloader="INFO" cmp="INFO" cmp-container="INFO" configuration="INFO" connector="INFO" corba="INFO" deployment="INFO" ejb-container="INFO" javamail="INFO" jaxr="INFO" jaxrpc="INFO" jdo="INFO" jms="INFO" jta="INFO" jts="INFO" mdb-container="INFO" naming="INFO" node-agent="INFO" resource-adapter="INFO" root="INFO" saaj="INFO" security="INFO" server="INFO" synchronization="INFO" util="INFO" verifier="INFO" web-container="INFO"/>
</log-service>
<security-service anonymous-role="ANYONE" audit-enabled="false" audit-modules="default" default-realm="file" jacc="default">
<!-- All administrative users use this realm by default. -->
<auth-realm classname="com.sun.enterprise.security.auth.realm.file.FileRealm" name="admin-realm">
<property name="file" value="${com.sun.aas.instanceRoot}/config/admin-keyfile"/>
<property name="jaas-context" value="fileRealm"/>
</auth-realm>
<!-- All administrative users use this realm by default. -->
<auth-realm classname="com.sun.enterprise.security.auth.realm.file.FileRealm" name="file">
<property name="file" value="${com.sun.aas.instanceRoot}/config/keyfile"/>
<property name="jaas-context" value="fileRealm"/>
</auth-realm>
<auth-realm classname="com.sun.enterprise.security.auth.realm.certificate.CertificateRealm" name="certificate">
</auth-realm>
<jacc-provider name="default" policy-configuration-factory-provider="com.sun.enterprise.security.provider.PolicyConfigurationFactoryImpl" policy-provider="com.sun.enterprise.security.provider.PolicyWrapper">
<property name="repository" value="${com.sun.aas.instanceRoot}/generated/policy"/>
</jacc-provider>
<audit-module classname="com.sun.enterprise.security.Audit" name="default">
<property name="auditOn" value="false"/>
</audit-module>
<message-security-config auth-layer="SOAP">
<!-- turned off by default -->
<provider-config class-name="com.sun.xml.wss.provider.ClientSecurityAuthModule" provider-id="ClientProvider" provider-type="client">
<request-policy auth-source="content"/>
<response-policy auth-source="content"/>
<property name="security.config" value="${com.sun.aas.instanceRoot}/config/wss-server-config.xml"/>
</provider-config>
<provider-config class-name="com.sun.xml.wss.provider.ServerSecurityAuthModule" provider-id="ServerProvider" provider-type="server">
<request-policy auth-source="content"/>
<response-policy auth-source="content"/>
<property name="security.config" value="${com.sun.aas.instanceRoot}/config/wss-server-config.xml"/>
</provider-config>
</message-security-config>
</security-service>
<transaction-service automatic-recovery="false" heuristic-decision="rollback" keypoint-interval="2048" retry-timeout-in-seconds="600" timeout-in-seconds="0" tx-log-dir="${com.sun.aas.instanceRoot}/logs"/>
<monitoring-service>
<module-monitoring-levels connector-connection-pool="OFF" connector-service="OFF" ejb-container="OFF" http-service="OFF" jdbc-connection-pool="OFF" jms-service="OFF" jvm="OFF" orb="OFF" thread-pool="OFF" transaction-service="OFF" web-container="OFF"/>
</monitoring-service>
<java-config debug-enabled="false" debug-options="-Xdebug -Xrunjdwp:transport=dt_socket,server=y,suspend=n,address=9009" env-classpath-ignored="true" java-home="${com.sun.aas.javaRoot}" javac-options="-g" rmic-options="-iiop -poa -alwaysgenerate -keepgenerated -g" server-classpath="${com.sun.aas.installRoot}/lib/install/applications/jmsra/imqjmsra.jar${path.separator}${com.sun.aas.imqLib}/jaxm-api.jar${path.separator}${com.sun.aas.imqLib}/fscontext.jar${path.separator}${com.sun.aas.antLib}/ant.jar">
<!-- various required jvm-options -->
<jvm-options>-client</jvm-options>
<jvm-options>-Djava.endorsed.dirs=${com.sun.aas.installRoot}/lib/endorsed</jvm-options>
<jvm-options>-Djava.security.policy=${com.sun.aas.instanceRoot}/config/server.policy</jvm-options>
<jvm-options>-Djava.security.auth.login.config=${com.sun.aas.instanceRoot}/config/login.conf</jvm-options>
<jvm-options>-Dsun.rmi.dgc.server.gcInterval=3600000</jvm-options>
<jvm-options>-Dsun.rmi.dgc.client.gcInterval=3600000</jvm-options>
<jvm-options>-Xmx512m</jvm-options>
<jvm-options>-Djavax.net.ssl.keyStore=${com.sun.aas.instanceRoot}/config/keystore.jks</jvm-options>
<jvm-options>-Djavax.net.ssl.trustStore=${com.sun.aas.instanceRoot}/config/cacerts.jks</jvm-options>
<jvm-options>-Djava.ext.dirs=${com.sun.aas.javaRoot}/jre/lib/ext${path.separator}${com.sun.aas.instanceRoot}/lib/ext${path.separator}${com.sun.aas.derbyRoot}/lib</jvm-options>
<jvm-options>-Djdbc.drivers=org.apache.derby.jdbc.ClientDriver</jvm-options>
<jvm-options>-Djavax.management.builder.initial=com.sun.enterprise.admin.server.core.jmx.AppServerMBeanServerBuilder</jvm-options>
<jvm-options>-Dcom.sun.enterprise.config.config_environment_factory_class=com.sun.enterprise.config.serverbeans.AppserverConfigEnvironmentFactory</jvm-options>
<jvm-options>-Dcom.sun.enterprise.taglibs=appserv-jstl.jar,jsf-impl.jar</jvm-options>
<jvm-options>-Dcom.sun.enterprise.taglisteners=jsf-impl.jar</jvm-options>
<jvm-options>-XX:NewRatio=2</jvm-options>
</java-config>
<thread-pools>
<thread-pool idle-thread-timeout-in-seconds="120" max-thread-pool-size="200" min-thread-pool-size="0" num-work-queues="1" thread-pool-id="thread-pool-1"/>
</thread-pools>
</config>
<!-- config model with name "server-config" ends -->
</configs>
<servers>
<server config-ref="server-config" name="server">
<application-ref disable-timeout-in-minutes="30" enabled="true" lb-enabled="false" ref="adminapp" virtual-servers="__asadmin"/>
<application-ref disable-timeout-in-minutes="30" enabled="true" lb-enabled="false" ref="admingui" virtual-servers="__asadmin"/>
<application-ref disable-timeout-in-minutes="30" enabled="true" lb-enabled="false" ref="com_sun_web_ui" virtual-servers="__asadmin"/>
<application-ref disable-timeout-in-minutes="30" enabled="true" lb-enabled="false" ref="MEjbApp" virtual-servers="server"/>
<application-ref disable-timeout-in-minutes="30" enabled="true" lb-enabled="false" ref="__ejb_container_timer_app" virtual-servers="server"/>
<application-ref disable-timeout-in-minutes="30" enabled="true" lb-enabled="false" ref="jsfcomponents" virtual-servers="server"/>
<resource-ref enabled="true" ref="jdbc/__TimerPool"/>
<resource-ref enabled="true" ref="jdbc/__default"/>
</server>
</servers>
<property name="administrative.domain.name" value="domain1"/>
</domain>
I'm still having this issue, thus any thoughts or ideas are greatly appreciated.
Thanks,
--Todd -
Hi All,
Sorry if this has been posted in the past, I've tried checking previous posts and I can't see any mention of it so does anyone know how to setup audition so that it picks up/defaults to the correct sound card when different users login? This was pretty easy under XP but under Windows 7 it's a nightmare. I've tried disabling the onboard S.C. but audition still defaults to windows sounds. We're using a mixture of part roaming profile and default profiles and Audition 3 with W7 32bit. Any help would be appreciated. Please let me know if you need any further details.
Thanks in advanceIn Win 7 all the Audition settings are stored in, for instance, C:\Users\Computer Name\AppData\Roaming\Adobe\Audition\3.0. Audio driver settings are in the "audition_settings.xml" file. So presumably there should be a different file in each Users AppData.
-
Hi all,
11.2.0.3
I want to audit all the actions being done by the user "sys" and "system" and all other users with DBA privilege. Especially the action when they delete or truncate the SYS.$AUD table.
I read in the docs that they are audited by default? Is truncating the SYS.$AUD included? Is there a simple command for this?
Thanks a lot,
zxyThe Oracle security guidelines said:
1.1 Log the following events in the audit log
1.1.1 ALTER ANY PROCEDURE
1.1.2 ALTER ANY TABLE
1.1.3 ALTER DATABASE
1.1.4 ALTER PROFILE
1.1.5 AUDIT ROLE BY ACCESS
1.1.6 ALTER SYSTEM
1.1.7 ALTER USER
1.1.8 AUDIT SYSTEM
1.1.9 AUDIT SYSTEM BY ACCESS
1.1.10 CREATE ANY JOB
1.1.11 CREATE ANY LIBRARY
1.1.12 CREATE ANY PROCEDURE
1.1.13 CREATE ANY TABLE
1.1.14 CREATE EXTERNAL JOB
1.1.15 CREATE PUBLIC DATABASE LINK
1.1.16 CREATE SESSION
1.1.17 CREATE USER
1.1.18 DROP ANY PROCEDURE
1.1.19 DROP ANY TABLE
1.1.20 DROP PROFILE
1.1.21 DROP USER
1.1.22 EXEMPT ACCESS POLICY
1.1.23 GRANT ANY OBJECT PRIVILEGE
1.1.24 GRANT ANY PRIVILEGE
1.1.25 GRANT ANY ROLE
Why is that > truncating or deleting of SYS.AUD$ not included?
Thanks -
Hi All ,
I want to enable Auditing in Oracle E-biz R12.1.3 version , Such that i can find out which user(s) have logged in to my Applications on which date and time .
Please Guide me through a detailed procedure .
Regards .Below mentioned metalink note will help you:-
How To Audit An Oracle Applications' User? [ID 395849.1]
What Tables Are Involved In Using The System Profile 'Sign-On:Audit Level'? [ID 368260.1]
Basically you need to set "Sign-On:Audit Level" profile.
This profile can be set to one from four possible values at site level, and this is all what you need to do in order to enable it:
1) NONE – no audit enabled (Default value)
2) USER – audit user login to system, the logon time and the logoff time.
3) RESPONSIBILITY – audit all the above + which responsibilities the user chose and how long he stayed in each responsibility.
4) FORM – audit all the above + which forms the user used and how long he stayed in each form.
Thanks,
JD -
11.2.0.2.0
Just looking for confirmation if I want to audit access to any object in a schema I have to run "audit all on schema.object" by dynamically creating the script from dba_objects.
Is there anything along the lines of "audit all on schema"sb92075 wrote:
>Is there anything along the lines of "audit all on schema"
No
what happens when new objects are created in the schema after such a command were issued?
well if there were such a command then there would either be be a default of A) new objects audited by default or B) override default by specifying new objects are not to be audited. or vice versa
but as there isnt, then they wont be. -
Issue in Configuring Oracle WebCenter Content: Records
HI,
I have an issue in Configuring Oracle WebCenter Content: Records
In "Records Management Setup Checklist"
Checked-in Audit Entries Default Metadata
Checked-in Screening Reports Default Metadata
Checked-in Reservation Default Metadata
Am not able to select the category/folder in the default check-in form for the above, and i don't see anything in the drop down also
When i click on the Browse button of above 3..
see Retention Schedule & favorite Schedule
But am not able to select any of those.
AnyOne faced this issue, pls help..
Thanks!!!!The Oracle webcenter content: Records system will enable the retention schedule but it won't create any default retention category. If you want apply retention to a content then first you have to create the retention category and the disposition rule. Once you create the retention category then it will be listed under Retention Schedule. In your case complete the default configuration without applying retention, once you create retention you can apply that to those contents.
Browse Content --> Retention Schedules --> Create Retention Category
HTH..
Regards,
Manoj -
Sun Java System Application Server8 can not startup (help me )
I work in an japanese compay in China. recently, my JSC can not work
who can help me
the error infomation is :
The Sun Java System Application Server could not start:
Possible reasons:
1.port conflict
2.Incorrect server configuartion
3.corrputed deployed application
my java Studio Creator version: 2004Q2 Update9
I have used this tool for three weeks , in the frist week. everything is ok.
no probroblem happened. in the second week ,sometimes my JSC can not startup, so I restarted my JSC. and it can work again. later, the same problem happened again. when I restarted my JSC , it sill does not work, so I have to restart my computer and it startup successfully,
two days later, the same problem happened again. I restarted my computer , it still did not work. so I have to change my port number in the domain.xml. sometimes it woks well, but sometimes I can't not startup.
in the third week, no matter what I do, the problem can not be solved.
some of my colleagues don't have such problem. but some of them have the same problem. when I run my project on the computer that don't have such problem , it can startup. I don't know why, just a little weird.
till now , no one in our company can tell why this problem happened.
and I believe that anybody who use JSC will encountered this error sooner or later.
who can tell me why will this problem happen? and where can I find some related imformation about this problem. thanks!!!!!!
my domain.xml
<?xml version="1.0" encoding="UTF-8"?>
<!DOCTYPE domain PUBLIC "-//Sun Microsystems Inc.//DTD Application Server 8.0 Domain//EN" "http://www.sun.com/software/appserver/dtds/sun-domain_1_0.dtd">
<!--
Copyright 2004 Sun Microsystems, Inc. All rights reserved.
SUN PROPRIETARY/CONFIDENTIAL. Use is subject to license terms.
-->
<!-- Generated from default-domain.xml.template -->
<domain application-root="${com.sun.aas.instanceRoot}/applications" log-root="${com.sun.aas.instanceRoot}/logs">
<applications>
<j2ee-application enabled="true" location="${com.sun.aas.instanceRoot}/applications/j2ee-apps/MEjbApp" name="MEjbApp" object-type="system-all"/>
<j2ee-application enabled="true" location="${com.sun.aas.instanceRoot}/applications/j2ee-apps/__ejb_container_timer_app" name="__ejb_container_timer_app" object-type="system-all"/>
<web-module context-root="/web1" enabled="true" location="${com.sun.aas.installRoot}/lib/install/applications/adminapp/adminapp_war" name="adminapp" object-type="system-admin">
<!-- System Web Module - DO NOT DELETE! -->
</web-module>
<web-module context-root="/asadmin" enabled="true" location="${com.sun.aas.installRoot}/lib/install/applications/admingui/adminGUI_war" name="admingui" object-type="system-admin">
<!-- System Web Module - DO NOT DELETE! -->
</web-module>
<web-module context-root="/com_sun_web_ui" enabled="true" location="${com.sun.aas.installRoot}/lib/install/applications/com_sun_web_ui" name="com_sun_web_ui" object-type="system-admin">
<!-- System Web Module - DO NOT DELETE! -->
</web-module>
</applications>
<resources>
<jdbc-resource enabled="true" jndi-name="jdbc/__TimerPool" object-type="system-all" pool-name="__TimerPool"/>
<jdbc-resource enabled="true" jndi-name="jdbc/PointBase" object-type="user" pool-name="PointBasePool"/>
<jdbc-connection-pool connection-validation-method="auto-commit" datasource-classname="com.pointbase.xa.xaDataSource" fail-all-connections="false" idle-timeout-in-seconds="300" is-connection-validation-required="false" is-isolation-level-guaranteed="true" max-pool-size="32" max-wait-time-in-millis="60000" name="__TimerPool" pool-resize-quantity="2" res-type="javax.sql.XADataSource" steady-pool-size="8">
<property name="DatabaseName" value="jdbc:pointbase:embedded:ejbtimer,database.home=${com.sun.aas.instanceRoot}/lib/databases"/>
<property name="User" value="pbPublic"/>
<property name="Password" value="pbPublic"/>
</jdbc-connection-pool>
<jdbc-connection-pool connection-validation-method="auto-commit" datasource-classname="com.pointbase.xa.xaDataSource" fail-all-connections="false" idle-timeout-in-seconds="300" is-connection-validation-required="false" is-isolation-level-guaranteed="true" max-pool-size="32" max-wait-time-in-millis="60000" name="PointBasePool" pool-resize-quantity="2" res-type="javax.sql.XADataSource" steady-pool-size="8">
<property name="DatabaseName" value="jdbc:pointbase:server://localhost:9092/sun-appserv-samples"/>
<property name="Password" value="pbPublic"/>
<property name="User" value="pbPublic"/>
</jdbc-connection-pool>
</resources>
<configs>
<config name="server-config">
<http-service>
<http-listener acceptor-threads="100" address="0.0.0.0" default-virtual-server="server" enabled="true" id="http-listener-1" port="28080" security-enabled="false" server-name="" xpowered-by="true">
</http-listener>
<http-listener acceptor-threads="100" address="0.0.0.0" default-virtual-server="server" enabled="true" id="http-listener-2" port="21043" security-enabled="true" server-name="" xpowered-by="true">
</http-listener>
<http-listener acceptor-threads="100" address="0.0.0.0" default-virtual-server="__asadmin" enabled="true" id="admin-listener" port="24848" security-enabled="false" server-name="" xpowered-by="true">
</http-listener>
<virtual-server hosts="sif-caicj" http-listeners="http-listener-1,http-listener-2" id="server" state="on">
<property name="docroot" value="${com.sun.aas.instanceRoot}/docroot"/>
<property name="accesslog" value="${com.sun.aas.instanceRoot}/logs/access"/>
</virtual-server>
<virtual-server default-web-module="admingui" hosts="sif-caicj" http-listeners="admin-listener" id="__asadmin" state="on">
<property name="accesslog" value="${com.sun.aas.instanceRoot}/logs/access"/>
</virtual-server>
</http-service>
<iiop-service client-authentication-required="false">
<orb max-connections="1024" message-fragment-size="1024" use-thread-pool-ids="thread-pool-1"/>
<iiop-listener address="0.0.0.0" enabled="true" id="orb-listener-1" port="23700" security-enabled="false"/>
<iiop-listener address="0.0.0.0" enabled="true" id="SSL" port="21060" security-enabled="true">
<ssl cert-nickname="s1as" client-auth-enabled="false" ssl2-enabled="false" ssl3-enabled="true" tls-enabled="true" tls-rollback-enabled="true"/>
</iiop-listener>
<iiop-listener address="0.0.0.0" enabled="true" id="SSL_MUTUALAUTH" port="21061" security-enabled="true">
<ssl cert-nickname="s1as" client-auth-enabled="true" ssl2-enabled="false" ssl3-enabled="true" tls-enabled="true" tls-rollback-enabled="true"/>
</iiop-listener>
</iiop-service>
<admin-service type="das-and-server">
<das-config admin-session-timeout-in-minutes="60" autodeploy-dir="${com.sun.aas.instanceRoot}/autodeploy" autodeploy-enabled="true" autodeploy-jsp-precompilation-enabled="false" autodeploy-polling-interval-in-seconds="2" autodeploy-verifier-enabled="false" deploy-xml-validation="full" dynamic-reload-enabled="true" dynamic-reload-poll-interval-in-seconds="2"/>
</admin-service>
<web-container/>
<ejb-container cache-idle-timeout-in-seconds="600" cache-resize-quantity="32" commit-option="B" max-cache-size="512" max-pool-size="32" pool-idle-timeout-in-seconds="600" pool-resize-quantity="8" removal-timeout-in-seconds="5400" session-store="${com.sun.aas.instanceRoot}/session-store" steady-pool-size="0" victim-selection-policy="nru"/>
<mdb-container idle-timeout-in-seconds="600" max-pool-size="32" pool-resize-quantity="8" steady-pool-size="0"/>
<jms-service init-timeout-in-seconds="60" type="LOCAL">
<jms-host admin-password="admin" admin-user-name="admin" host="sif-caicj" name="default_JMS_host" port="27676"/>
</jms-service>
<log-service alarms="false" file="${com.sun.aas.instanceRoot}/logs/server.log" log-rotation-limit-in-bytes="2000000000" log-to-console="false" use-system-logging="false">
<module-log-levels admin="INFO" classloader="INFO" cmp="INFO" cmp-container="INFO" configuration="INFO" connector="INFO" corba="INFO" deployment="INFO" ejb-container="INFO" javamail="INFO" jaxr="INFO" jaxrpc="INFO" jdo="INFO" jms="INFO" jta="INFO" jts="INFO" mdb-container="INFO" naming="INFO" resource-adapter="INFO" root="INFO" saaj="INFO" security="INFO" server="INFO" verifier="INFO" web-container="INFO"/>
</log-service>
<security-service anonymous-role="ANYONE" audit-enabled="false" audit-modules="default" default-realm="file" jacc="default">
<auth-realm classname="com.sun.enterprise.security.auth.realm.file.FileRealm" name="file">
<property name="file" value="${com.sun.aas.instanceRoot}/config/keyfile"/>
<property name="jaas-context" value="fileRealm"/>
</auth-realm>
<auth-realm classname="com.sun.enterprise.security.auth.realm.certificate.CertificateRealm" name="certificate">
</auth-realm>
<jacc-provider name="default" policy-configuration-factory-provider="com.sun.enterprise.security.provider.PolicyConfigurationFactoryImpl" policy-provider="com.sun.enterprise.security.provider.PolicyWrapper">
<property name="repository" value="${com.sun.aas.instanceRoot}/generated/policy"/>
</jacc-provider>
<audit-module classname="com.sun.enterprise.security.Audit" name="default">
<property name="auditOn" value="false"/>
</audit-module>
</security-service>
<transaction-service automatic-recovery="false" heuristic-decision="rollback" keypoint-interval="2048" retry-timeout-in-seconds="600" timeout-in-seconds="0" tx-log-dir="${com.sun.aas.instanceRoot}/logs"/>
<monitoring-service>
<module-monitoring-levels connector-connection-pool="OFF" ejb-container="OFF" http-service="OFF" jdbc-connection-pool="OFF" orb="OFF" thread-pool="OFF" transaction-service="OFF" web-container="OFF"/>
</monitoring-service>
<java-config classpath-suffix="${com.sun.aas.installRoot}/pointbase/lib/pbclient.jar${path.separator}${com.sun.aas.installRoot}/pointbase/lib/pbembedded.jar${path.separator}" debug-enabled="false" debug-options="-Xdebug -Xrunjdwp:transport=dt_shmem,server=y,suspend=n,address=creator-14848" env-classpath-ignored="true" java-home="${com.sun.aas.javaRoot}" javac-options="-g" rmic-options="-iiop -poa -alwaysgenerate -keepgenerated -g" server-classpath="${com.sun.aas.javaRoot}/lib/tools.jar${path.separator}${com.sun.aas.installRoot}/lib/install/applications/jmsra/imqjmsra.jar${path.separator}${com.sun.aas.imqLib}/jaxm-api.jar${path.separator}${com.sun.aas.imqLib}/fscontext.jar${path.separator}${com.sun.aas.antLib}/ant.jar">
<!-- various required jvm-options -->
<jvm-options>-client</jvm-options>
<jvm-options>-Djava.endorsed.dirs=${com.sun.aas.installRoot}/lib/endorsed</jvm-options>
<jvm-options>-Djava.security.policy=${com.sun.aas.instanceRoot}/config/server.policy</jvm-options>
<jvm-options>-Djava.security.auth.login.config=${com.sun.aas.instanceRoot}/config/login.conf</jvm-options>
<jvm-options>-Dsun.rmi.dgc.server.gcInterval=3600000</jvm-options>
<jvm-options>-Dsun.rmi.dgc.client.gcInterval=3600000</jvm-options>
<jvm-options>-Xmx512m</jvm-options>
<jvm-options>-Djavax.net.ssl.keyStore=${com.sun.aas.instanceRoot}/config/keystore.jks</jvm-options>
<jvm-options>-Djavax.net.ssl.trustStore=${com.sun.aas.instanceRoot}/config/cacerts.jks</jvm-options>
<jvm-options>-Djava.ext.dirs=${com.sun.aas.javaRoot}/jre/lib/ext${path.separator}${com.sun.aas.instanceRoot}/lib/ext</jvm-options>
<jvm-options> -Djdbc.drivers=com.pointbase.jdbc.jdbcUniversalDriver</jvm-options>
<jvm-options>-Dcom.sun.enterprise.taglibs=appserv-jstl.jar,jsf-impl.jar</jvm-options>
<jvm-options>-XX:NewRatio=2</jvm-options>
</java-config>
<thread-pools>
<thread-pool idle-thread-timeout-in-seconds="120" max-thread-pool-size="200" min-thread-pool-size="0" num-work-queues="1" thread-pool-id="thread-pool-1"/>
</thread-pools>
</config>
<!-- config model with name "server-config" ends -->
</configs>
<servers>
<server config-ref="server-config" name="server">
<application-ref enabled="true" ref="adminapp" virtual-servers="__asadmin"/>
<application-ref enabled="true" ref="admingui" virtual-servers="__asadmin"/>
<application-ref enabled="true" ref="com_sun_web_ui" virtual-servers="__asadmin"/>
<application-ref enabled="true" ref="MEjbApp" virtual-servers="server"/>
<application-ref enabled="true" ref="__ejb_container_timer_app" virtual-servers="server"/>
<resource-ref enabled="true" ref="jdbc/__TimerPool"/>
<resource-ref enabled="true" ref="jdbc/PointBase"/>
</server>
</servers>
</domain>
my server.log
I am sorry there are some japanese words in the log
�v���I: fatal
����: information
�x��:warning
�R�l�N�V���������������G���[�������������� : error happened when connecting
Starting Sun Java System Application Server Platform Edition 8.0.0_01 (build b08-fcs) ...
[#|2006-02-10T12:59:48.050+0800|����|sun-appserver-pe8.0.0_01|javax.enterprise.system.core|_ThreadID=10;|CORE5076: Using [Java HotSpot(TM) Client VM, Version 1.4.2_06] from [Sun Microsystems Inc.]|#]
[#|2006-02-10T12:59:49.206+0800|����|sun-appserver-pe8.0.0_01|javax.enterprise.system.tools.admin|_ThreadID=10;|ADM0020:Following is the information about the JMX MBeanServer used:|#]
[#|2006-02-10T12:59:49.394+0800|����|sun-appserver-pe8.0.0_01|javax.enterprise.system.tools.admin|_ThreadID=10;|ADM0001:MBeanServer initialized successfully|#]
[#|2006-02-10T12:59:51.628+0800|����|sun-appserver-pe8.0.0_01|javax.enterprise.system.container.web|_ThreadID=10;|Creating virtual server server|#]
[#|2006-02-10T12:59:51.659+0800|����|sun-appserver-pe8.0.0_01|javax.enterprise.system.core|_ThreadID=10;|S1AS AVK Instrumentation disabled|#]
[#|2006-02-10T12:59:51.738+0800|����|sun-appserver-pe8.0.0_01|javax.enterprise.system.core.security|_ThreadID=10;|SEC1143: Loading policy provider com.sun.enterprise.security.provider.PolicyWrapper.|#]
[#|2006-02-10T12:59:53.910+0800|����|sun-appserver-pe8.0.0_01|javax.enterprise.system.core.transaction|_ThreadID=10;|JTS5014: Recoverable JTS instance, serverId = [100]|#]
[#|2006-02-10T12:59:55.519+0800|����|sun-appserver-pe8.0.0_01|javax.enterprise.system.core|_ThreadID=10;|Satisfying Optional Packages dependencies...|#]
[#|2006-02-10T12:59:55.707+0800|����|sun-appserver-pe8.0.0_01|javax.enterprise.resource.resourceadapter|_ThreadID=10;|RAR7008 : Initialized monitoring registry and listeners|#]
[#|2006-02-10T12:59:56.394+0800|����|sun-appserver-pe8.0.0_01|javax.enterprise.system.core|_ThreadID=10;|CORE5100:Loading system apps|#]
[#|2006-02-10T12:59:57.019+0800|����|sun-appserver-pe8.0.0_01|javax.enterprise.system.core.classloading|_ThreadID=10;|LDR5010: All ejb(s) of [MEjbApp] loaded successfully!|#]
[#|2006-02-10T12:59:57.769+0800|����|sun-appserver-pe8.0.0_01|javax.enterprise.system.container.ejb|_ThreadID=10;|EJB5109:EJB Timer Service started successfully for datasource [jdbc/__TimerPool]|#]
[#|2006-02-10T12:59:57.769+0800|����|sun-appserver-pe8.0.0_01|javax.enterprise.system.core.classloading|_ThreadID=10;|LDR5010: All ejb(s) of [__ejb_container_timer_app] loaded successfully!|#]
[#|2006-02-10T12:59:57.816+0800|����|sun-appserver-pe8.0.0_01|javax.enterprise.system.container.web|_ThreadID=10;|WEB0302: Starting Tomcat.|#]
[#|2006-02-10T12:59:57.957+0800|����|sun-appserver-pe8.0.0_01|javax.enterprise.system.container.web|_ThreadID=10;|WEB0100: Loading web module [adminapp] in virtual server [server] at [web1]|#]
[#|2006-02-10T12:59:58.113+0800|����|sun-appserver-pe8.0.0_01|javax.enterprise.system.container.web|_ThreadID=10;|WEB0100: Loading web module [admingui] in virtual server [server] at [asadmin]|#]
[#|2006-02-10T12:59:58.113+0800|�x��|sun-appserver-pe8.0.0_01|javax.enterprise.system.container.web|_ThreadID=10;|WEB0500: default-locale attribute of locale-charset-info element has been deprecated and is being ignored. Use default-charset attribute of parameter-encoding element instead|#]
[#|2006-02-10T12:59:58.129+0800|����|sun-appserver-pe8.0.0_01|javax.enterprise.system.container.web|_ThreadID=10;|WEB0100: Loading web module [com_sun_web_ui] in virtual server [server] at [com_sun_web_ui]|#]
[#|2006-02-10T12:59:58.129+0800|����|sun-appserver-pe8.0.0_01|org.apache.catalina.startup.Embedded|_ThreadID=10;|Starting tomcat server|#]
[#|2006-02-10T12:59:58.129+0800|����|sun-appserver-pe8.0.0_01|org.apache.catalina.startup.Embedded|_ThreadID=10;|Catalina naming disabled|#]
[#|2006-02-10T12:59:58.222+0800|����|sun-appserver-pe8.0.0_01|org.apache.catalina.core.StandardEngine|_ThreadID=10;|Starting Servlet Engine: Sun-Java-System/Application-Server-PE-8.0|#]
[#|2006-02-10T13:00:01.285+0800|����|sun-appserver-pe8.0.0_01|org.apache.catalina.startup.ContextConfig|_ThreadID=10;|�A�v���P�[�V������web.xml�����������������A�f�t�H���g�������g�p������ StandardEngine[server].StandardHost[server].StandardContext[]|#]
[#|2006-02-10T13:00:03.191+0800|����|sun-appserver-pe8.0.0_01|org.apache.coyote.http11.Http11Protocol|_ThreadID=10;|Coyote HTTP/1.1���|�[�g28080��������������|#]
[#|2006-02-10T13:00:03.254+0800|����|sun-appserver-pe8.0.0_01|org.apache.coyote.http11.Http11Protocol|_ThreadID=10;|Coyote HTTP/1.1���|�[�g 28080 ���N��������|#]
[#|2006-02-10T13:00:03.348+0800|����|sun-appserver-pe8.0.0_01|org.apache.coyote.http11.Http11Protocol|_ThreadID=10;|Coyote HTTP/1.1���|�[�g21043��������������|#]
[#|2006-02-10T13:00:03.363+0800|����|sun-appserver-pe8.0.0_01|org.apache.coyote.http11.Http11Protocol|_ThreadID=10;|Coyote HTTP/1.1���|�[�g 21043 ���N��������|#]
[#|2006-02-10T13:00:03.379+0800|����|sun-appserver-pe8.0.0_01|org.apache.coyote.http11.Http11Protocol|_ThreadID=10;|Coyote HTTP/1.1���|�[�g24848��������������|#]
[#|2006-02-10T13:00:03.379+0800|����|sun-appserver-pe8.0.0_01|org.apache.coyote.http11.Http11Protocol|_ThreadID=10;|Coyote HTTP/1.1���|�[�g 24848 ���N��������|#]
[#|2006-02-10T13:01:04.883+0800|����|sun-appserver-pe8.0.0_01|javax.enterprise.resource.jms|_ThreadID=10;|JMS5035: Timed out after 60000 milliseconds while trying to verify if the JMS service startup succeeded.|#]
[#|2006-02-10T13:01:04.883+0800|����|sun-appserver-pe8.0.0_01|javax.enterprise.resource.jms|_ThreadID=10;|JMS5037: Check permissions of MQ instance directory E:\Sun\Creator\SunAppServer8\imq\var\instances|#]
[#|2006-02-10T13:01:04.883+0800|����|sun-appserver-pe8.0.0_01|javax.enterprise.resource.jms|_ThreadID=10;|JMS5036: More details may be available in the log file for the JMS service broker instance imqbroker. Please refer to the JMS provider documentation for the exact location of this log file.|#]
[#|2006-02-10T13:01:04.883+0800|�v���I|sun-appserver-pe8.0.0_01|javax.enterprise.system.core|_ThreadID=10;|CORE5071: An error occured during initialization
com.sun.appserv.server.ServerLifecycleException: [C4003]: �R�l�N�V���������������G���[���������������B - ���o java.net.ConnectException: Connection refused: connect
at com.sun.enterprise.jms.JmsProviderLifecycle.checkProviderStartup(JmsProviderLifecycle.java:415)
at com.sun.enterprise.server.PEMain.run(PEMain.java:224)
at com.sun.enterprise.server.PEMain.main(PEMain.java:172)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:324)
at org.apache.commons.launcher.ChildMain.run(ChildMain.java:269)
Caused by: com.sun.messaging.jms.JMSException: [C4003]: �R�l�N�V���������������G���[���������������B - ���o java.net.ConnectException: Connection refused: connect
at com.sun.messaging.jmq.jmsclient.ExceptionHandler.getJMSConnectException(ExceptionHandler.java:233)
at com.sun.messaging.jmq.jmsclient.ExceptionHandler.handleConnectException(ExceptionHandler.java:180)
at com.sun.messaging.jmq.jmsclient.PortMapperClient.readBrokerPorts(PortMapperClient.java:172)
at com.sun.messaging.jmq.jmsclient.PortMapperClient.init(PortMapperClient.java:97)
at com.sun.messaging.jmq.jmsclient.PortMapperClient.<init>(PortMapperClient.java:50)
at com.sun.messaging.jmq.jmsclient.protocol.tcp.TCPConnectionHandler.<init>(TCPConnectionHandler.java:53)
at com.sun.messaging.jmq.jmsclient.protocol.tcp.TCPStreamHandler.openConnection(TCPStreamHandler.java:102)
at com.sun.messaging.jmq.jmsclient.ConnectionInitiator.createConnectionOld(ConnectionInitiator.java:271)
at com.sun.messaging.jmq.jmsclient.ConnectionInitiator.createConnection(ConnectionInitiator.java:107)
at com.sun.messaging.jmq.jmsclient.ConnectionInitiator.createConnection(ConnectionInitiator.java:92)
at com.sun.messaging.jmq.jmsclient.ProtocolHandler.init(ProtocolHandler.java:562)
at com.sun.messaging.jmq.jmsclient.ProtocolHandler.<init>(ProtocolHandler.java:1102)
at com.sun.messaging.jmq.jmsclient.ConnectionImpl.openConnection(ConnectionImpl.java:1741)
at com.sun.messaging.jmq.jmsclient.ConnectionImpl.init(ConnectionImpl.java:588)
at com.sun.messaging.jmq.jmsclient.ConnectionImpl.<init>(ConnectionImpl.java:274)
at com.sun.messaging.jmq.jmsclient.UnifiedConnectionImpl.<init>(UnifiedConnectionImpl.java:33)
at com.sun.messaging.jmq.jmsclient.QueueConnectionImpl.<init>(QueueConnectionImpl.java:32)
at com.sun.messaging.ConnectionFactory.createQueueConnection(ConnectionFactory.java:72)
at com.sun.messaging.jmq.admin.jmsspi.JMSAdminImpl.pingProvider(JMSAdminImpl.java:734)
at com.sun.enterprise.jms.JmsProviderLifecycle.waitForJmsProvider(JmsProviderLifecycle.java:324)
at com.sun.enterprise.jms.JmsProviderLifecycle.checkProviderStartup(JmsProviderLifecycle.java:384)
... 7 more
Caused by: java.net.ConnectException: Connection refused: connect
at java.net.PlainSocketImpl.socketConnect(Native Method)
at java.net.PlainSocketImpl.doConnect(PlainSocketImpl.java:305)
at java.net.PlainSocketImpl.connectToAddress(PlainSocketImpl.java:171)
at java.net.PlainSocketImpl.connect(PlainSocketImpl.java:158)
at java.net.Socket.connect(Socket.java:452)
at java.net.Socket.connect(Socket.java:402)
at java.net.Socket.<init>(Socket.java:309)
at java.net.Socket.<init>(Socket.java:124)
at com.sun.messaging.jmq.jmsclient.PortMapperClient.readBrokerPorts(PortMapperClient.java:152)
... 25 more
|#]
[#|2006-02-10T13:01:04.883+0800|�v���I|sun-appserver-pe8.0.0_01|javax.enterprise.system.core|_ThreadID=10;|Server Startup failed. Exiting...|#]
[#|2006-02-10T13:01:04.883+0800|����|sun-appserver-pe8.0.0_01|javax.enterprise.system.core|_ThreadID=10;|Server shutdown in progress...|#]
[#|2006-02-10T13:01:04.883+0800|����|sun-appserver-pe8.0.0_01|javax.enterprise.system.container.web|_ThreadID=10;|WEB0303: Stopping Tomcat.|#]
[#|2006-02-10T13:01:04.883+0800|����|sun-appserver-pe8.0.0_01|org.apache.coyote.http11.Http11Protocol|_ThreadID=10;|Stoping http11 protocol on 28080 server:type=ThreadPool,name=http28080|#]
[#|2006-02-10T13:01:04.899+0800|����|sun-appserver-pe8.0.0_01|org.apache.coyote.http11.Http11Protocol|_ThreadID=10;|Stoping http11 protocol on 21043 server:type=ThreadPool,name=http21043|#]
[#|2006-02-10T13:01:04.915+0800|����|sun-appserver-pe8.0.0_01|org.apache.coyote.http11.Http11Protocol|_ThreadID=10;|Stoping http11 protocol on 24848 server:type=ThreadPool,name=http24848|#]
[#|2006-02-10T13:01:05.008+0800|����|sun-appserver-pe8.0.0_01|javax.enterprise.system.core|_ThreadID=10;|CORE5051: Shutting down all J2EE applications ...|#]
[#|2006-02-10T13:01:05.008+0800|����|sun-appserver-pe8.0.0_01|javax.enterprise.system.container.ejb|_ThreadID=10;|EJB5122:EJB Timer Service shutdown at [2006/02/10 13:01:05]|#]
[#|2006-02-10T13:01:05.008+0800|����|sun-appserver-pe8.0.0_01|javax.enterprise.system.core|_ThreadID=10;|CORE5052: Application shutdown complete.|#]
[#|2006-02-10T13:01:05.008+0800|�x��|sun-appserver-pe8.0.0_01|javax.enterprise.system.core|_ThreadID=10;|CORE5061: Exception :
com.sun.appserv.server.ServerLifecycleException: MQ startup failed :[C4003]: �R�l�N�V���������������G���[���������������B - ���o java.net.ConnectException: Connection refused: connect
at com.sun.enterprise.jms.JmsProviderLifecycle.checkProviderStartup(JmsProviderLifecycle.java:364)
at com.sun.enterprise.jms.JmsProviderLifecycle.onShutdown(JmsProviderLifecycle.java:433)
at com.sun.enterprise.server.ApplicationServer.onShutdown(ApplicationServer.java:400)
at com.sun.enterprise.server.PEMain.run(PEMain.java:233)
at com.sun.enterprise.server.PEMain.main(PEMain.java:172)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:324)
at org.apache.commons.launcher.ChildMain.run(ChildMain.java:269)
|#]
[#|2006-02-10T13:01:05.008+0800|�v���I|sun-appserver-pe8.0.0_01|javax.enterprise.system.core|_ThreadID=10;|Server stopped due to Server startup failure.|#]
[#|2006-02-10T13:01:05.024+0800|����|sun-appserver-pe8.0.0_01|javax.enterprise.system.core|_ThreadID=11;|sending notification to server...server|#]
[#|2006-02-10T13:01:05.024+0800|����|sun-appserver-pe8.0.0_01|javax.enterprise.system.core|_ThreadID=11;|Server shutdown complete.|#]
Starting Sun Java System Application Server Platform Edition 8.0.0_01 (build b08-fcs) ...
[#|2006-02-10T13:01:10.743+0800|����|sun-appserver-pe8.0.0_01|javax.enterprise.system.core|_ThreadID=10;|CORE5076: Using [Java HotSpot(TM) Client VM, Version 1.4.2_06] from [Sun Microsystems Inc.]|#]
[#|2006-02-10T13:01:11.728+0800|����|sun-appserver-pe8.0.0_01|javax.enterprise.system.tools.admin|_ThreadID=10;|ADM0020:Following is the information about the JMX MBeanServer used:|#]
[#|2006-02-10T13:01:11.868+0800|����|sun-appserver-pe8.0.0_01|javax.enterprise.system.tools.admin|_ThreadID=10;|ADM0001:MBeanServer initialized successfully|#]
[#|2006-02-10T13:01:14.634+0800|����|sun-appserver-pe8.0.0_01|javax.enterprise.system.container.web|_ThreadID=10;|Creating virtual server server|#]
[#|2006-02-10T13:01:14.650+0800|����|sun-appserver-pe8.0.0_01|javax.enterprise.system.core|_ThreadID=10;|S1AS AVK Instrumentation disabled|#]
[#|2006-02-10T13:01:14.665+0800|����|sun-appserver-pe8.0.0_01|javax.enterprise.system.core.security|_ThreadID=10;|SEC1143: Loading policy provider com.sun.enterprise.security.provider.PolicyWrapper.|#]
[#|2006-02-10T13:01:16.337+0800|����|sun-appserver-pe8.0.0_01|javax.enterprise.system.core.transaction|_ThreadID=10;|JTS5014: Recoverable JTS instance, serverId = [100]|#]
[#|2006-02-10T13:01:17.603+0800|����|sun-appserver-pe8.0.0_01|javax.enterprise.system.core|_ThreadID=10;|Satisfying Optional Packages dependencies...|#]
[#|2006-02-10T13:01:17.790+0800|����|sun-appserver-pe8.0.0_01|javax.enterprise.resource.resourceadapter|_ThreadID=10;|RAR7008 : Initialized monitoring registry and listeners|#]
[#|2006-02-10T13:01:18.462+0800|����|sun-appserver-pe8.0.0_01|javax.enterprise.system.core|_ThreadID=10;|CORE5100:Loading system apps|#]
[#|2006-02-10T13:01:19.025+0800|����|sun-appserver-pe8.0.0_01|javax.enterprise.system.core.classloading|_ThreadID=10;|LDR5010: All ejb(s) of [MEjbApp] loaded successfully!|#]
[#|2006-02-10T13:01:19.728+0800|����|sun-appserver-pe8.0.0_01|javax.enterprise.system.container.ejb|_ThreadID=10;|EJB5109:EJB Timer Service started successfully for datasource [jdbc/__TimerPool]|#]
[#|2006-02-10T13:01:19.728+0800|����|sun-appserver-pe8.0.0_01|javax.enterprise.system.core.classloading|_ThreadID=10;|LDR5010: All ejb(s) of [__ejb_container_timer_app] loaded successfully!|#]
[#|2006-02-10T13:01:19.775+0800|����|sun-appserver-pe8.0.0_01|javax.enterprise.system.container.web|_ThreadID=10;|WEB0302: Starting Tomcat.|#]
[#|2006-02-10T13:01:19.916+0800|����|sun-appserver-pe8.0.0_01|javax.enterprise.system.container.web|_ThreadID=10;|WEB0100: Loading web module [adminapp] in virtual server [server] at [web1]|#]
[#|2006-02-10T13:01:20.041+0800|����|sun-appserver-pe8.0.0_01|javax.enterprise.system.container.web|_ThreadID=10;|WEB0100: Loading web module [admingui] in virtual server [server] at [asadmin]|#]
[#|2006-02-10T13:01:20.041+0800|�x��|sun-appserver-pe8.0.0_01|javax.enterprise.system.container.web|_ThreadID=10;|WEB0500: default-locale attribute of locale-charset-info element has been deprecated and is being ignored. Use default-charset attribute of parameter-encoding element instead|#]
[#|2006-02-10T13:01:20.041+0800|����|sun-appserver-pe8.0.0_01|javax.enterprise.system.container.web|_ThreadID=10;|WEB0100: Loading web module [com_sun_web_ui] in virtual server [server] at [com_sun_web_ui]|#]
[#|2006-02-10T13:01:20.056+0800|����|sun-appserver-pe8.0.0_01|org.apache.catalina.startup.Embedded|_ThreadID=10;|Starting tomcat server|#]
[#|2006-02-10T13:01:20.056+0800|����|sun-appserver-pe8.0.0_01|org.apache.catalina.startup.Embedded|_ThreadID=10;|Catalina naming disabled|#]
[#|2006-02-10T13:01:20.150+0800|����|sun-appserver-pe8.0.0_01|org.apache.catalina.c &nHi,
Restarting the computer should have stopped the appserver.
To kill the appserver manually you can go to the command prompt
<install-dir>\Sun\Creator2\SunAppServer8\bin\asadmin.bat\stop-appserv
Thanks,
RK.
Maybe you are looking for
-
New Ipod Touch- don't know where to start
I have been using an older ipod for years and have several thousand song/pictures in it (and itunes)... I just got a new touch model and want to know if I can just plug it in to my computer and download from my current itunes... if not, what do I do.
-
Greetings everybody, For this particular question I am not getting any help from the Java forums and Google. Not very long ago I had to send a stream of bytes from an applet to a servlet (the applet and its helper classes are packed inside a signed j
-
Photoshop Element 8's Bridge not showing RAW thumbnails
Hello! I use PSE 8 on a Mac with Snow Leopard. I'm shooting with a Canon EOS 550D. Bridge used to display RAW thumbnails correctly, but it doesn't anymore. Just blank generic icons. Now, I've reinstalled Camera Raw 6.1 (the Photoshop Elements Version
-
Re: Peculiar behaviour while MRP
Hi All, I am facing a situation which I am not able to understand. I am trying to run MRP for a FG which has stock in place & Safety stock.On entering some PIR via MD61 & running the MRP the planned order created is of a quantity more than required.
-
I recieved a laptop from a friend that had Adobe cs6 Master Collection on it, seemingly activated (no trial timer in sight). the problem is, i plan on reinstalling windows and would like to keep this $2000 collection of software, but i cannot find th