Audition 3 in Windows 8.1?  is it possible?

I would like to run Audition 3 in Windows 8.1.  I have had a terrible time trying to get it installed.
I've downloaded the file... extracted the files... get to the 'SELECT LANGUAGE' screen and "poof" everything goes away. 
Toshiba Satellite Ultrabook E45t.  Just upgraded to Windows 8.1 (it was on it when I bought it)

It's simple. The trick lies in you NOT trying to install the '.exe' file; as you've noted, the installation asks for your language, and then goes away.
Try installing from a file called 'components.msi'
If you've had 64bit Windows operating systems for a while, you might've noticed before, that some 64bit apps come in a ".msi" file format. This is the same case.
Good luck!

Similar Messages

  • How can I remove music from my iPhone that's not on a playlist, or checked off in the Sync window in any of the possible categories (Playlist, genre, artist, etc)? HELP! It's taking up SO much space on my phone

    How can I remove music from my iPhone that's not on a playlist, or checked off in the Sync window in any of the possible categories (Playlist, genre, artist, etc)? HELP! It's taking up SO much space on my phone but I cannot see a way to remove any of it

    If it's slow on startup it would be extensions loading or LaunchDaemons starting up. 
    You should have a look in:
    /Library/LaunchDaemons
    /Library/Extensions
    You can count out anything in your home folder and it shouldn't put anything in /System as that's reserved for Apple. 

  • Can Time Capsule be used as a time machine on a Windows Server.  Is this possible, and how do i configure this?

    I like to use the new TC in my office as a time machine on a Windows Server.  Is this possible, and how do i configure this?
    In fact my plan is to make the first back up by connecting to the server via an ethernet cable, but thereafter i like to bring the TC to my home and perform the incremental backups over the internet.  This is for safety reasons, in case for example the office is broken into, or flooded, or fire (god forbid).
    I sincerely hope it is possible, and not complicated.
    Alternatively i would not mind replacing our current Windows server 2003 with an Apple server, but all computers in the network (except mine) are Windows 7 or 8. Would it work?
    Thanks in advance.
    Paris

    I will consider the WD My Cloud device.
    It is a NAS.. it is designed to provide a cheap centralised file storage.
    What is NAS?? http://en.wikipedia.org/wiki/Network-attached_storage
    A file server like windows uses heaps of power to do very little.. in your setup.. In most setups like SBS it will do exchange server and provide a heap of useful connectivity to your clients.
    Since you are not using the windows server in anything but simple file serving you can replace with a NAS..
    Problem with the TC is, it is a router with a hard disk inside.. designed specifically for Time Machine.. it fails to provide what a NAS does.. easy access to any clients, local or remote.. TC is designed by apple for apple and the rest of world is not really invited to the party.
    It provides no backup.. no data protection.. and is so specifically apple orientated I do not think it works at all well with windows.
    For a simple example.. windows will have file issues with large files.. because it is only NTserver FAT32 to windows.. bad luck if you have large files.. !!
    Plainly if you use active directory in windows that facility is gone.
    I just like Apple products, find them more stable than Windows and easier to use.  Plus i can access the server from home if it is an Apple Server.
    If you only need remote access for yourself that is fine.. too bad for the windows clients I guess.
    Or you open it up to the world and bad luck for security.
    Apple do not design for mixed environment.. in fact with the TC there is no provision for windows access officially at all.. so anything you do is a fudge.
    You can use the TC for your Mac backups within the network.. that is fine. Apple provide no software at all to help with your windows clients.

  • I cannot access the Camera RAW dialogue box in PSE8 in windows 7. Is it possible?

    I cannot  access the Camera Raw Dialogue Box in PSE8 in windows 7.  Is it possible?

    I have PSEv.8 & WIN 7. I installed Camera raw three or four days ago without a problem, and it works just fine. Detailed directions are here:
    http://www.adobe.com/support/downloads/detail.jsp?ftpID=4810

  • I need to sync an iPhone 3GS to a new Mac book air. The phone is currently synched with a machine running windows xp. Is this possible ?

    I bought my wife a Mac book air to replace her windows lap top and want to sync her  IPhone 3GS  to her new computer. The phone is currently synced to a machine running windows xp. Is this possible ?

    Did a bit more research on this and moving iTunes isn't enough.  You will only get the iTunes library and not data like contacts, etc.  You should take both computers to the apple store.  They will migrate your data  from one to the other for you.

  • Acrobat and Distiller 5.0 on Windows 7. Is it possible to manage it to print on PDF or update it?

    I just installed the Acrobat and Distiller 5.0 on Windows 7. Is it possible to manage it to print on PDF? Or is it possible to update it to support Win 7?

    Hi NicoNeto,
    Acrobat 5.0 is not compatible with Windows 7. You need to purchase Acrobat XI as it is fully compatible with Windows 7 or later.
    http://www.adobe.com/products/acrobat.html?promoid=JOLIR

  • I wish to use Premeier Elements 13 with Windows XP. Is this possible?

    I use Premier Elements 10 on a PC with Windows XP. I wish to use Premeier Elements 13 with Windows XP. Is this possible?

    Manstandvd
    Just a just in case mention if you try to download and install Premiere Elements 13 to your Windows XP 32 bit or 64 bit computer....
    I was able to download the Adobe tryout for Premiere Elements 13 to my Windows 7 64 bit computer, but it would not install as per Adobe's statement that Premiere Elements 13 on Windows XP, Windows Vista, and Mac OSX 10.7 is not supported.
    If Window XP is your only computer, then you probably will be able to download the Premiere Elements 13 tryout but not install it.
    Do you have Windows 7, 8, or 8.1 64 bit computer as well as the XP?
    ATR

  • Too much logon audit success in same time ? a possible attack ?

    Hi , 
    I reviewed system log on Windows Server 2008R2 , and at a certain time ( say 7:00:00 AM) there is near 1000 logon success in Security audit logs . all of them are from Anonymous User from NT Authority . the server is an application server , is it a  possible
    attack ? tnx .

    Hi,
    Hope the following thread will help you to resolve this
    http://social.technet.microsoft.com/Forums/windowsserver/en-US/2a0e5f34-1237-4577-9aaa-4c029b87b68c/event-4624-anonymous?forum=winserversecurity
    Regards,
    Santhosh.
    www.jijitechnologies.com

  • Reinstalling Audition after Windows 7 crash/corruption

    My Audition CS5.5 went down after a Windows 7 blue screen crash and won't run now.  I understand that I'm entitled to reinstall it from Adobe's web site but would like to know how to do that.  I hope reisntalling will fix the problem, which is the latest of many that I've had with Adobe CS5.5.  Should I uninstall current corrupted version?  Will I have any trouble with the web site allowing me to download it again?
    I'm posting this to the forum because I have had NO LUCK with Adobe's help site or customer service personnel on ANY of my problems with Adobe CS5.5.  Also, this is the first time I've ever been able to find my way into the forum posting area and I wanted to try it, since I'm not sure I'll be able to find my way back here.  The site is so confusing that Adobe's own representative had trouble with it.  I'm holding on to the hope that there is a user out there who can help me.
    Thanks in advance.

    Run the Creative Suite Cleaner Tool and then download your software using this method:
    Direct Download Links for Adobe Software
    Also clean out the prefs. In fact that should be the first thing to try - if they got corrupted, they can easily cause crashes. Check your C:\Users\You\AppData\roaming\Adobe folder. And also check your system audio configuration and driver. Obviously flakey config there might be relevant for an audio processing program...
    Mylenium

  • Re-installing itunes on my windows PC is no longer possible, why?

    I have an ipod and an ipad. First I lost most of my 14,000 songs when trying to synchronize with a re insatlled version of itunes, now I cannot download itunes at all: the message i get is that installing itunes is not possible due to an error in Windows installer. Without the latest iTunes on my PC I cannot upgrade my iPad to OS 6. What can I do?

    the message i get is that installing itunes is not possible due to an error in Windows installer.
    What's the precise text of the error message, please? (There's a few different ones I can think of that you might be getting.)

  • Windows 8.1 upgrade not possible because Win 8 isn't activated

    A few months ago I bought a new Toshiba Satallite laptop with Windows 8 pre-installed
    Now I want to upgrade Windows 8 to Windows 8.1. But I don't see the Windows 8.1 upgrade in de Windows store. I think this is because my current installed windows doesn't seems te be activated..
    When I try to activate it, I get error: 0xC004F074.
    I found a solution by using command: SLUI 3 and then enter the product key to activate it, but I don't have a product key!! There is no sticker with a product key on the laptop.
    Could anyone help me with this issue, so I can activate my current Windows 8 install and upgrade to Windows 8.1?
    Message was edited by: mbarten

    Hi
    I had some problems with an upgrade to Win 8.1 in the past...
    Finally I managed to install the Windows 8.1 update after the notebook has been set back to factory settings.
    Im not quite sure if this needs to be done in your case, but in case the Win 8.1 update would not be possible after installation of all windows updates, you should reset the PC back to factory settings. After that the upgrade should works.

  • Mac and Windows shared external hard drive - possible?

    Our set up is a Windows XP pc and iMac 20" and I hoped that we could back up both computers using one external hard drive - that way if the Mac failed we could still use the pc to access the files and vice versa. But having looked into buying one I'm starting to get doubts about whether it is possible. I just don't understand all the technical stuff. Can anyone help in layman's terms how we go about it?
    Thanks
    Jane

    Try iFelix's excellent guides for Windows to Mac networking (link). I understand that he will do Vista versions as soon as possible. 
    A FAT32 formatted drive in a NAS Enclosure like this one (link) should suit you needs. Remember that a NAS drive will not have the performance of a Firewire connected drive so you do need to consider your intended usage.
    kind regards
    mrtotes

  • ACD as main display under Windows/BootCamp while in clamshell possible?

    Is there any way to run a BootCamp Windows XP Pro installation on an MBP using the ACD as main display while in clamshell mode? Currently the system refuses to wake up after I close the lid. I use a BT mouse/KB, but even with a USB mouse connected it wouldn't wake up. It seems like it would be possible, but I'm not sure how to go about it.

    Correct, there was no Gather Windows button.
    I do have multiple adapters, but one is an Apple adapter which is, apparently, "passive" whilst the other is active. The passive adapter never works at all under MacOS X, but I haven't tried it under Windows. The "active" adapter works under Windows, but only shows the apple bootup logo under MacOS X, and then turns the display off.
    I don't think that the mini displayport is faulty, because the second display plugged into it works perfectly through BootCamp.
    I'll try thoroughly testing out all adapters tonight, and then try a different brand of display. I've seen a lot of posts about ViewSonics being flakey under MacOS X, so it's possible it could be on the display driver side of things. Maybe ViewSonic does something screwy signal-wise in their displays, and Windows is willing to deal with it but MacOS X isn't.
    Oddly enough, the ViewSonic display I have was shipped with a single-link DVI cable, and it's always worked without a problem, even when plugged into the dual-link DVI port on the Mac Pro. So I don't believe that the display *itself* requires a complete dual-link connection to the computer.
    I have much appreciation for all the help and suggestions. Thanks again.

  • Using UIScrollView in a window-based app - IS IT POSSIBLE?

    sorry for noob question but i am very new and only 12 years old so i am very new. I am making an app that involves scrollviews but i want to use window based app so i can use the window setHidden piece of code instead of messing around with view controllers.
    My Question:
    How can I implement a scroll view into the app delegate .m since there is obviously no ViewDidLoad feature. Do I just make the IBOutlet in the .H file but what to do in the .M file to get the "scrollview ScrollEnable:YES" and the CGSize parameters in without causing a massive error?

    Hi Tom, and welcome to the Dev Forums!
    tomgoodenough wrote:
    sorry for noob question but i am very new
    This forum is for developers of all levels, including future developers and has-beens. Beginners are especially welcome.
    i want to use window based app so i can use the window setHidden piece of code instead of messing around with view controllers.
    I don't know why you'd want to hide your main window, but in any case, a view controller wouldn't prevent you from doing that. View controllers do all kinds of good things behind the scenes and catch lots of useful messages, which is why they're almost always recommended for any full-screen view--even in the simplest possible project (see [Overview|http://developer.apple.com/library/ios/#documentation/UIKit/Reference /UIViewControllerClass/Reference/Reference.html%23//appleref/occ/cl/UIViewController] in the UIViewController Class Reference). That said, making iOS apps without any view controllers will be an excellent way for you to learn what they do for you, so onward and upward!
    How can I implement a scroll view into the app delegate .m ... Do I just make the IBOutlet in the .H file but what to do in the .M file to get the "scrollview ScrollEnable:YES" and the CGSize parameters ...?
    Yes, assuming a UIScrollView object has been added to MainWindow.xib, make an IBOutlet ivar and @property for your scroll view in the @interface (MyAppDelegate.h) of your app delegate, and connect that outlet to the scroll view in IB. Then add the scroll view to the window and set its properties in the [applicationDidFinishLaunching:|http://developer.apple.com/library/ios/#documen tation/UIKit/Reference/UIApplicationDelegateProtocol/Reference/Reference.html%23//appleref/doc/uid/TP40006786] method of the @implementation (MyAppDelegate.m). Don't forget to set the [contentSize|http://developer.apple.com/library/ios/#documentation/UIKit/Refere nce/UIScrollViewClass/Reference/UIScrollView.html%23//appleref/doc/uid/TP40006922] property of the scroll view to the size of the view it will scroll. The view won't scroll unless contentSize is higher and/or wider than the scroll view frame.
    ... there is obviously no ViewDidLoad feature. ...
    There's no reason your app delegate class needs to be a direct subclass of NSObject. It can just as easily be a subclass of UIViewController. In that case you could override viewDidLoad, or any of the other useful view controller methods in the app delegate @implementation. Just change the superclass from NSObject to UIViewController in the first line of the @interface, and connect the 'view' outlet of the app delegate to the scroll view object in IB.
    \- Ray

  • Panel Sizes change when maximizing (increasing or decreasing) Audition CS6 window

    When I adjust the size of the "Files" panel and "Match Volume" panel, as soon as I click on maximize, the Audition window changes the size of the panels. When I decrease the Audition window by clicking on maximize for example, the File panel is so small that only 1 file name is displayed. These problems did not happen in CS5.5.

    When I adjust the size of the "Files" panel and "Match Volume" panel, as soon as I click on maximize, the Audition window changes the size of the panels. When I decrease the Audition window by clicking on maximize for example, the File panel is so small that only 1 file name is displayed. These problems did not happen in CS5.5.

  • Audit Vault Windows feature?

    Hi ,
    Have any one installed Audit Vault 10.2.2.1 Windows ?
    Just After installing on Windows, I found I could log in to DB as below.
    SQL> conn sys/<pass> as sysdba
    Is this a Windows specific feature?
    I confirmed I couldn't log in as such on any other platforms.
    Sincerely,

    Please repost this in the AUDIT VAULT forum.
    I guess from my perspective installing an audit vault on Windows is a bit like inviting a bank robber to inspect the safety deposit boxes.

Maybe you are looking for