Audition 3 won't recognise CD/DVD player to rip tracks

Although every thing works properly, Audition will not recognise the CD/DVD player using EXTRACT AUDIO FROM CD
The DVD player shows in drop down list of DEVICE INTERFACE OPTIONS (but not as a default) but when selected it cannot see tracks on the CD.
All Device Interface options are greyed out including ASPI/SPTI options
When using the Open file on a CD technique it brings in 10 samples only and the screen dims.????????

I wish someone would tell you how to fix this as I have had the same problem

Similar Messages

Dvd disc won't play on dvd player

Hi I,m quite new to apple ,i need help as i burnt a video off sd card onto dvd it plays great on my macbook pro but when i try to put it in my dvd player so i can watch it on tv the dvd player won't read it. i have gone through 8 dvd,s trying to sort it.
Any help greatly excepted .
Christine

I WAS NOT AWARE THAT I HAD TO USE A SOFTWARE, I RANG APPLE AND THEY TOLD ME TO DOWN LOAD VLC PLAYER BUT IT DIDNT WORK.
I DOWNLOADED THE SHORT VIDEO FROM SD CARD ONTO DISC AND CAN PLAY IT NO PROBLEM ON MAC BUT IT WONT PLAY ON MY DVD SO I CAN WATCH IT ON TV. I HAVE USED 8 DVDS TRYING LOL TRIED TO RING APPLE AGAIN BUT IT JUST HAD JUST CLOSED
BEEN ON THIS SINCE 6PM LOL
CHRISTINE

Encore DVD Writing Cancels won't play on DVD player issue

So I have a very confusing issue with encore.
When I press build everything works fine. Then writing begins. The moment the writing reaches the end of the progress bar (the exact moment) the progress bar goes to empty and the bottom bar says canceling and ejects the DVD. Usually (not every time) a pop up menu saying "end of file" appears next. When I press ok for end of file message the pop up disappears and suddenly the DVD progress bar is filled and the DVD says completed (as if nothing just happened). So I'm confused whether it worked or not!
I reinsert the DVD that just ejected into my Mac and it works! Then I put it into a DVD player and it won't play, it won't play on my old Xbox 360 either, but it WILL play in a Bluray player?!
Everytime I rewrite the files I get different results. They all work on my Mac and blu ray but only 1 of 4 works in the Xbox. The one that does work in the Xbox will read in the DVD player but plays choppy and skips around as if the DVD is scratched or damaged?
! Other differences involve the write speed, sometimes the options are 8x or 4x. Other times its 3x,2x, and 1x. When the latter write speed options occur I cannot press "test before writing" it's greyed out. When 8x and 4x are the speed options I can check it. I used different DVDs and it didn't help.
I work for a company that needs to copy the DVDs but they can't be copied. Don't know why?
Here are my settings
Mpeg 2-DVD exported from Pr.
720x480
Codecs: Mpeg video, Mpeg layer
Duration: 1:10:26
Encore DVD transcode status: Don't Transcode
Encore Project/assets
2 Menus
1 Mpeg video
1 Timeline
Build
Format: DVD
Output: DVD disc
Source: Create Using current project
4.7 gb disc
Has 510mb free
All regions
Unlimited copies
First Play and title button are a menu
Check build is good.
I really need help with this weird issue quickly thanks.

Just an Update, I've tried many things to no avail still have a few others to try. Being a Large file it takes a while to try things.
I went ahead and got Toast, but considering that the Image Iso and the DVD Folder both gave me the End of File Error and the Disc "Failed Completed" Error I figured it a no go and it was. It did however give me something that Opened everywhere (Mac,Xbox,Dvd) , but it did not play on the Dvd correctly.
I've done numerous things in the Mac permissions end Like trying as a different user and running as the Root User, but it was also unsuccessful.
I've Re- Exported the file many different ways, but finally had a breakthrough using a version of M2v. It's definitely an error with Finalizing. My disc previously began to mess up and give "END of File" after it finished writing, it never even made it to the "Writing Lead Out" stage. I beleive this is why it plays it certain places fine, but probably not as well in systems (like Dvd players) that require those last few steps like writing Lead Out.
The only issue I have now is that when I put it into the DVD player it say "No title"!?!? AY CARAMBA!!!
Now I'm working on trying to figure this NEW problem! I have all my menus and links in place, but no go. I think it may be related to the previous problem in that something beneath the surface is wrong with my computer. Being a used Mac with a restored Hard Drive there are probably endless possibilities, but I hesitate to think that way because it may also have absolutely nothing to do with it.
So any help is greatly appreciated
whether it be a specific issue you know of dealing with used Macs and issue similar to mine
or just on the "NO Title" error as a separate issue. I'm hoping this "No Title" is something simple and unrelated, I've already burned through about 13 discs and even more pain pills for the headaches!!

IDVD autoplay movie won't play in DVD player

My IDVD movie won't play in a DVD player when created in autoplay mode. It plays fine on my computer both in preview and on my computer's DVD player program and it works fine if I create a menu and button, just not if I create it in autoplay mode. I've tried it on my work compter and three DVD players and it won't play in any of them. Can anyone help, please?

Hi Sue
Thanks for responding.
I used a 16x Maxwell DVD-R. The same kind of disc worked fine with the movie when I had a menu.
I'm afraid I don't know what a Patchburn is.
Josef
Hi JosefK:
Welcome to discussions.
Did you use a Data DVD by chance?
It needs to be a DVD-R with iMovie 4.
Are you using an external with Patchburn?
Sue
Hi Sue
Thanks for responding.
I used a 16x DVD-R. The same kind of disc worked fine with the movie when I had a menu.
I'm afraid I don't know what a Patchburn is.
Josef

Burned DVD won't play in DVD player?

I burned a video I purchased on itunes to a DVD using Finder (dragging and dropping onto disk). It burned fine, but won't play in my DVD player. It will play on my computer though.
Are there different formats you can burn it in? Am I not using the correct format?
I am using a DVD-RW disk.
Any help is appreciated! Thanks.

In iTunes you create a Playlist from the tracks you want and then select it and 'Burn Playlist to disc', just dragging the files in the Finder is just copying the files across and not making a playable CD.

Disc won't play in DVD player

I just burned a project with iDVD 6 and while it works fine on my Mac, It won't play on my regular DVD player. I know that my main DVD player plays DVD-R because it has played every DVD that I've recorded from my spindle. I test them all on this player. I burned 2 copies of this project and neither would play on my main DVD player... but they would play on my bedroom DVD player. What could this be?

What could this be?
It could be one of several things (or a combination thereof). A dirty lens on the set top dvd player for example. When is the last time you used a quality Maxell or 3M dvd lens cleaner kit? Avoid cheapy kits since they can cause more issues than they resolve.
It could be the media itself.
It could be that you need to lower the burn speed to make the media more readable to this particular set top DVD Player.
It could be that your set top player is a bit dated and refuses to play newer media/s.
Best to take your finished iDvd to a store that sells these DVD Players and try it out on several machines. See if it still happens on other players as well.
Btw, please tell me you are not using Memorex or TDK. I recommend Verbatim or Maxell (your choice) while troubleshooting on this iDvd Forum.
Message was edited by: SDMacuser

DVD won't play in DVD player, but OK in computer

Hi, I recently made a 500-picture slideshow in iMovie, imported it into iDVD and then burned it. the dvd plays on computers and in my playstation, but won't play on my sony dvd player, which usually doesn't have a problem playing projects that i made on my computer.
any advice would be appreciated.

Hi, I recently made a 500-picture slideshow in iMovie, imported it into iDVD and then burned it. the dvd plays on computers and in my playstation, but won't play on my sony dvd player, which usually doesn't have a problem playing projects that i made on my computer.
any advice would be appreciated.

Burned DVD on iDVD. Won't play on DVD player

I burned a slide show on iDVD and when I put the disk in my DVD player or back in my computer it won't play.

Hi
My thoughts on this - this occures to me when
• Using Cheap brands of DVD e.g. Memorex and NoName are bad choice for Video-DVDs (might work as Data-DVDs)
I use Verbatim (only)
• DVD type used - I use now DVD-R as they also play on older DVD-players - NEVER +/-RW as they are known problem makers
• BURN SPEED - I now set down burn speed to x2 or x4 = Less burn errors = Plays on Mac that made the burn and so on PCs - Works so much better
Yours Bengt W

Burned DVD won't play on DVD player

I have downloaded a 22 minute video that I would like to burn to a DVD to play in my DVD player. I have attempted on both DVD-R and DVD+R. They burn to the disc but will not play on the DVD player. The error message states that playback may not be available on this disk. I have used the windows support search to problem solve on my own but have had no success. I have ensured that I am selecting the CD/DVD player option to utilize the Mastered format. I have gone into my option and have no filters on. I have the video format on NTSC since I am from Pennsylvania/US. I have not tried to burn it on slow or medium speed because it does burn to the DVD without problem it just won't playback on the DVD player. What do you recommend as my next course of action for troubleshooting.
This question was solved.
View Solution.

I would suspect that the video is not DVD Mpeg2 compliant. Depending on the DVD player, some will play other formats, also. If there are no video authoring programs on the computer, try Windows Movie Maker (free) to see if the video needs too be converted to DVD Mpeg2 standards.
{---------- Please click the "Thumbs Up" to say thanks for helping.
Please click "Accept As Solution" if my help has solved your problem. ----------}
This is a user supported forum. I am a volunteer and I do not work for HP.

My burned DVD won't play on DVD player or VLC

Hi all,
I have a DVD that was burned by a colleague that will not play on any of the computers in my office. It opens automatically in DVD player and freezes on the title (there is no menu on the DVD) with the words "PLAY" in the bottom right corner and when I press play or skip or anything, either nothing happens or there is a "not permitted" message. The same thing happens when I try to play it on VLC and when it won't open in Quicktime. I have no clue what this could be as it plays on my computer at home and my Xbox and my colleague tested it on her own computer before she sent it over. Please help! This is incredibly frustrating.
BTW - when I double click the DVD it opens to two folders - AUDIO_TS and VIDEO_TS but when I try to open any of the files, it just says there is no application to open the file and I wouldn't know which application to pick so yea. I'm screwed.

Hi
The most common origin to this are:
• Brand of DVD used - was to Cheap e.g. Memorex, NoName etc - known problem makers.
• Type of DVD used - DVD+/-RW are a NO NO, DVD+R plays well on newer DVD-players - I use DVD-R
• BURN SPEED - I always set this down to x2 or max x4 - and it's so much better
• Dusty DVD burner - I run a Cleaning DVD from time to others - NO LIQUID but the ones with brushes
• Material feed to iDVD - doesn't suit - iDVD tries many Video-Codecs, Audio and Photo file formats it really can not handle = A BAD DVD.
• Very low - FREE SPACE on Boot hard disk (I never go less than 25GB)
Usually one of these or all of them results in disaster.
Yours Bengt W

Movies won't play on DVD player

I am using idvd 5.0. I have made several movies with the internal optical writer using Maxell dvd +R discs which played fine in my dvd players (regular, tv type). My internal writer broke and I have since used two different external writers, both of which support dvd+r, and movies from neither will work in my dvd players - they won't play at all. The movie will play on a PC. I did try writing the movies to a disk file and when I try to bring up the mac DVD Player it says "A Valid DVD drive could not be found".. That may be a totally separate problem or maybe that means the file idvd is creating is bad.. I have 153 gb of free disk space and 689 mb of free memory so I think I am ok there. Any ideas?
Thanks!

Hi
Most often this is due to
• Brand of DVD used
• Type of DVD
• Burn Speed
I only use Verbatim DVDs (would like to try Taiyo Yuden - but can't find them)
I only use DVD-R (can't burn +R on my old Macs) - Never +/-RW
I set down burn speed to x4 (or even x1) - This can't be done in all versions of iDVD
But since iDVD 5 one can save as a DiskImage - then burn this with Disk Util tool
and here set down burn speed to x4.
Just burn to DVD via DeskTop - Do not deliver a Video-DVD but a Data-DVD which can not
playback on DVD-players.
I use Roxio Toast™ to do the burn - simpler than Disk Util tool - but costs a bit.
Yours Bengt W

Burned DVD won't work after DVD player 4.6.1

I made a DVD of my daughter's wedding two days ago and it played fine on my iMac G5. Yesterday I updated the DVD player with the DVD 4.6.1 update and now I can't get my DVD to show up on the desktop or play in the DVD player. Any thoughts?
ds

I also trashed the iDVD plist to see if that will speed up my DVD burning.
Ain't gonna' happen. You should create a disk image and then burn DVDs.
File/Save As Disc Image...
http://docs.info.apple.com/article.html?artnum=164927
This will isolate any encoding/burning issues you may encounter. Once the disc image is created, double-click the .img and burn the virtual disc that should appear on your desktop, using Disk Utility to burn the DVD.
Open Disk Utility (in Utilities folder in Applications folder), click on the virtual disc (not the .img, the one below) in the left-hand window. Click the Burn icon. Your SuperDrive tray will open. Insert a recordable DVD. (DVD-R preferred by me.) Click the Close button. Wait. Then click the Burn button.
-->If the virtual disk selection won't allow you to click the Burn icon, use the .img file instead. This may have changed in 10.3.9 and Tiger.
b Also, you can use DVD Player to play the virtual disk to check your iDVD 5 project before burning to DVD. Launch DVD Player. File/Open VIDEO_TS (Open DVD media... in Player 4.6). Find the VIDEO_TS folder and open that. (The audio folder is for DVD-Audio disks.)
http://docs.info.apple.com/article.html?artnum=93006

Finished DVD won't play in DVD player.....

Hi All,
I am new to DVD Studio Pro; I made the jump from idvd......!
I just finished my first DVD, and it won't play in my dvd player; it plays fine on my computer with the DVD player. could it be because the dvd player is about 6 years old?
TIA!!

How did you burn the DVD and what media? That can aalso cause issues, Which version of DVD SP are you using and what machine?
Take a look at this thread, discusses how some things can be off depending on what andd where you are trying to run things, goes to qutting, but also something that can cause other issues
http://discussions.apple.com/thread.jspa?messageID=6643197#6643197

Just Authored DVD won't play in DVD Player, but will in my kid's PS2

I just made this dvd with Studio Pro 3.0.2, burned it to a DVD-R and DVD Player won't play it and it used to play others I've authored, but now it won't..can't copy it either with Toast..it just opens up the tray again..no error code or anything. Anyone know what's up??
I think I'm doing everything just as I used to..
Thanks
Mark
Like I said..work's in the PS2....Weird

When you say DVD Player (standalone) or do you mean Apple DVD Player? Could be many things from a bad burn to the drive you are trying it in is going bad/dirty. When you are copying it with Toast why are you trying to copy it, why not just burn another copy off the build?
Anymore details on the process, what brand of media, how you burned it could point to where the issue is.

Won't recognise blank DVD media

My mid 2010 model won't recognise any inserted blank DVD media - it's ok with dvd's, cd's and blank cd media.
I put blank DVD in and it tries to read it then spits it out after a minute or so...
Any help or advice appreciated..
Kwozzii

Kwozzii wrote:
My mid 2010 model won't recognise any inserted blank DVD media - it's ok with dvd's, cd's and blank cd media.
I put blank DVD in and it tries to read it then spits it out after a minute or so...
Bad Superdrive. You're under warranty, so if you're near an AppleStore, just bring it in for repair, otherwise call Applecare and they will repair via Fed-Ex

Audition 3 won't recognise CD/DVD player to rip tracks

Similar Messages

Maybe you are looking for