Audition 6 Crashen when previewing or applying effects

Hi
I recently installed the Creative Suite Master Collection CS6 Windows version of my new Retina MacBook pro (new 13" model) and I'm having a few problems with Audition. The main problem is that when applying effects (like a FFT filter or Stretch and pitch) Audition would crash when trying to either preview the effect or apply it.
One example is when trying to change the pitch of an audio file. Normally I use “Audition” as the algorithm rather than iZotope. Audition would crash when previewing the effect or when trying to add it. It doesn’t crash when using the iZotope algorithm. It also happens if I try to apply reverb effects too.
This Macbook Pro I’m using is running Windows 7 Pro x64 via Bootcamp. I don’t have a lot installed on it atm & both windows & the master collection are fully activated. I had an older Macbook that never had this problem before. I’ve also tried Audition from CS5.5 on Mac OS X & it doesn’t have this sort of problem.
These are the errors that show up acording to System info.
21/11/2013 11:37 PM Application Error Faulting application name: Adobe Audition CS6.exe, version: 5.0.2.7, time stamp: 0x505806ee
Faulting module name: unknown, version: 0.0.0.0, time stamp: 0x00000000
Exception code: 0xc0000005
Fault offset: 0x9cd8ff7e
Faulting process id: 0xe38
Faulting application start time: 0x01cee7126c7bcb50
Faulting application path: C:\Program Files (x86)\Adobe\Adobe Audition CS6\Adobe Audition CS6.exe
Faulting module path: unknown
Report Id: d7646e70-5305-11e3-b2ec-b8e8562f706d
21/11/2013 11:15 PM Application Error Faulting application name: Adobe Audition CS6.exe, version: 5.0.2.7, time stamp: 0x505806ee
Faulting module name: unknown, version: 0.0.0.0, time stamp: 0x00000000
Exception code: 0xc0000005
Fault offset: 0x9cd8ff7e
Faulting process id: 0x12b4
Faulting application start time: 0x01cee70f7f3697c8
Faulting application path: C:\Program Files (x86)\Adobe\Adobe Audition CS6\Adobe Audition CS6.exe
Faulting module path: unknown
Report Id: cbcd68a9-5302-11e3-b2ec-b8e8562f706d
21/11/2013 11:12 PM Application Error Faulting application name: Adobe Audition CS6.exe, version: 5.0.2.7, time stamp: 0x505806ee
Faulting module name: unknown, version: 0.0.0.0, time stamp: 0x00000000
Exception code: 0xc0000005
Fault offset: 0x9cd8ff7e
Faulting process id: 0x4b8
Faulting application start time: 0x01cee70f04570245
Faulting application path: C:\Program Files (x86)\Adobe\Adobe Audition CS6\Adobe Audition CS6.exe
Faulting module path: unknown
Report Id: 561403a2-5302-11e3-b2ec-b8e8562f706d
21/11/2013 11:10 PM Application Error Faulting application name: Adobe Audition CS6.exe, version: 5.0.2.7, time stamp: 0x505806ee
Faulting module name: unknown, version: 0.0.0.0, time stamp: 0x00000000
Exception code: 0xc0000005
Fault offset: 0x9cd8ff7e
Faulting process id: 0xe6c
Faulting application start time: 0x01cee70ec8477f12
Faulting application path: C:\Program Files (x86)\Adobe\Adobe Audition CS6\Adobe Audition CS6.exe
Faulting module path: unknown
Report Id: 10929c0c-5302-11e3-b2ec-b8e8562f706d
21/11/2013 11:06 PM Application Error Faulting application name: Adobe Audition CS6.exe, version: 5.0.2.7, time stamp: 0x505806ee
Faulting module name: unknown, version: 0.0.0.0, time stamp: 0x00000000
Exception code: 0xc0000005
Fault offset: 0x9cd8ff7e
Faulting process id: 0x658
Faulting application start time: 0x01cee70e4b5727b1
Faulting application path: C:\Program Files (x86)\Adobe\Adobe Audition CS6\Adobe Audition CS6.exe
Faulting module path: unknown
Report Id: 9236f4ba-5301-11e3-b2ec-b8e8562f706d
21/11/2013 11:04 PM Application Error Faulting application name: Adobe Audition CS6.exe, version: 5.0.2.7, time stamp: 0x505806ee
Faulting module name: unknown, version: 0.0.0.0, time stamp: 0x00000000
Exception code: 0xc0000005
Fault offset: 0x9cd8ff7e
Faulting process id: 0xa8c
Faulting application start time: 0x01cee70dccc70c7b
Faulting application path: C:\Program Files (x86)\Adobe\Adobe Audition CS6\Adobe Audition CS6.exe
Faulting module path: unknown
Report Id: 4257ff4b-5301-11e3-b2ec-b8e8562f706d
20/11/2013 11:06 PM Application Error Faulting application name: Adobe Audition CS6.exe, version: 5.0.2.7, time stamp: 0x505806ee
Faulting module name: unknown, version: 0.0.0.0, time stamp: 0x00000000
Exception code: 0xc0000005
Fault offset: 0x9cd8ff7e
Faulting process id: 0x820
Faulting application start time: 0x01cee645220cb493
Faulting application path: C:\Program Files (x86)\Adobe\Adobe Audition CS6\Adobe Audition CS6.exe
Faulting module path: unknown
Report Id: 744a4280-5238-11e3-b707-b8e8562f706d
20/11/2013 11:58 AM Application Error Faulting application name: Adobe Audition CS6.exe, version: 5.0.2.7, time stamp: 0x505806ee
Faulting module name: unknown, version: 0.0.0.0, time stamp: 0x00000000
Exception code: 0xc0000005
Fault offset: 0xd9000001
Faulting process id: 0x760
Faulting application start time: 0x01cee5e7d393c02e
Faulting application path: C:\Program Files (x86)\Adobe\Adobe Audition CS6\Adobe Audition CS6.exe
Faulting module path: unknown
Report Id: 1c32aef1-51db-11e3-9a73-10ddb1d3a475
20/11/2013 10:21 AM Application Error Faulting application name: Adobe Audition CS6.exe, version: 5.0.0.708, time stamp: 0x4f70c4f6
Faulting module name: unknown, version: 0.0.0.0, time stamp: 0x00000000
Exception code: 0xc0000005
Fault offset: 0x9cd8ff7e
Faulting process id: 0xb14
Faulting application start time: 0x01cee5da3fe7841d
Faulting application path: C:\Program Files (x86)\Adobe\Adobe Audition CS6\Adobe Audition CS6.exe
Faulting module path: unknown
Report Id: 952a0ad5-51cd-11e3-8ec8-b8e8562f706d
20/11/2013 8:15 AM Application Error Faulting application name: Adobe Audition CS6.exe, version: 5.0.2.7, time stamp: 0x505806ee
Faulting module name: unknown, version: 0.0.0.0, time stamp: 0x00000000
Exception code: 0xc0000005
Fault offset: 0x9cd8ff7e
Faulting process id: 0x85c
Faulting application start time: 0x01cee5c8a7034e04
Faulting application path: C:\Program Files (x86)\Adobe\Adobe Audition CS6\Adobe Audition CS6.exe
Faulting module path: unknown
Report Id: fc3e6fae-51bb-11e3-a467-10ddb1d3a475
20/11/2013 8:02 AM Application Error Faulting application name: Adobe Audition CS6.exe, version: 5.0.2.7, time stamp: 0x505806ee
Faulting module name: unknown, version: 0.0.0.0, time stamp: 0x00000000
Exception code: 0xc0000005
Fault offset: 0x9cd8ff7e
Faulting process id: 0x71c
Faulting application start time: 0x01cee5c6b5872308
Faulting application path: C:\Program Files (x86)\Adobe\Adobe Audition CS6\Adobe Audition CS6.exe
Faulting module path: unknown
Report Id: 1b3c52ed-51ba-11e3-8f54-b8e8562f706d
20/11/2013 7:56 AM Application Error Faulting application name: Adobe Audition CS6.exe, version: 5.0.2.7, time stamp: 0x505806ee
Faulting module name: unknown, version: 0.0.0.0, time stamp: 0x00000000
Exception code: 0xc0000005
Fault offset: 0xd9000001
Faulting process id: 0xdd4
Faulting application start time: 0x01cee5c5b4d6e335
Faulting application path: C:\Program Files (x86)\Adobe\Adobe Audition CS6\Adobe Audition CS6.exe
Faulting module path: unknown
Report Id: 38bf67dd-51b9-11e3-8f54-b8e8562f706d
20/11/2013 7:53 AM Application Error Faulting application name: Adobe Audition CS6.exe, version: 5.0.2.7, time stamp: 0x505806ee
Faulting module name: unknown, version: 0.0.0.0, time stamp: 0x00000000
Exception code: 0xc0000005
Fault offset: 0x45ef2b00
Faulting process id: 0xfb8
Faulting application start time: 0x01cee5c5994aed2a
Faulting application path: C:\Program Files (x86)\Adobe\Adobe Audition CS6\Adobe Audition CS6.exe
Faulting module path: unknown
Report Id: e41b8eed-51b8-11e3-8f54-b8e8562f706d
20/11/2013 5:23 AM Application Error Faulting application name: Adobe Audition CS6.exe, version: 5.0.2.7, time stamp: 0x505806ee
Faulting module name: unknown, version: 0.0.0.0, time stamp: 0x00000000
Exception code: 0xc0000005
Fault offset: 0x9cd8ff7e
Faulting process id: 0x11f4
Faulting application start time: 0x01cee5b0a915ab6d
Faulting application path: C:\Program Files (x86)\Adobe\Adobe Audition CS6\Adobe Audition CS6.exe
Faulting module path: unknown
Report Id: f2af723e-51a3-11e3-b13b-b8e8562f706d
20/11/2013 4:31 AM Application Error Faulting application name: Adobe Audition CS6.exe, version: 5.0.2.7, time stamp: 0x505806ee
Faulting module name: unknown, version: 0.0.0.0, time stamp: 0x00000000
Exception code: 0xc0000005
Fault offset: 0x9cd8ff7e
Faulting process id: 0x10d8
Faulting application start time: 0x01cee5a7a7709775
Faulting application path: C:\Program Files (x86)\Adobe\Adobe Audition CS6\Adobe Audition CS6.exe
Faulting module path: unknown
Report Id: 9c86583e-519c-11e3-a64a-b8e8562f706d
20/11/2013 4:15 AM Application Error Faulting application name: Adobe Audition CS6.exe, version: 5.0.2.7, time stamp: 0x505806ee
Faulting module name: unknown, version: 0.0.0.0, time stamp: 0x00000000
Exception code: 0xc0000005
Fault offset: 0x9cd8ff7e
Faulting process id: 0x1390
Faulting application start time: 0x01cee5a6f5c8b771
Faulting application path: C:\Program Files (x86)\Adobe\Adobe Audition CS6\Adobe Audition CS6.exe
Faulting module path: unknown
Report Id: 589c80cd-519a-11e3-a64a-b8e8562f706d
20/11/2013 4:13 AM Application Error Faulting application name: Adobe Audition CS6.exe, version: 5.0.2.7, time stamp: 0x505806ee
Faulting module name: unknown, version: 0.0.0.0, time stamp: 0x00000000
Exception code: 0xc0000005
Fault offset: 0x9cd8ff7e
Faulting process id: 0x57c
Faulting application start time: 0x01cee5a6dc71a5dd
Faulting application path: C:\Program Files (x86)\Adobe\Adobe Audition CS6\Adobe Audition CS6.exe
Faulting module path: unknown
Report Id: 2803eecc-519a-11e3-a64a-b8e8562f706d
20/11/2013 4:13 AM Application Error Faulting application name: Adobe Audition CS6.exe, version: 5.0.2.7, time stamp: 0x505806ee
Faulting module name: unknown, version: 0.0.0.0, time stamp: 0x00000000
Exception code: 0xc0000005
Fault offset: 0x9cd8ff7e
Faulting process id: 0xc14
Faulting application start time: 0x01cee5a680b2c167
Faulting application path: C:\Program Files (x86)\Adobe\Adobe Audition CS6\Adobe Audition CS6.exe
Faulting module path: unknown
Report Id: 12d672bd-519a-11e3-a64a-b8e8562f706d
Heres what shows up on my Audition log.txt file
Log file created: 22/11/2013 10:14:59 AM
Ticks = 0      <2912> <AuLog.Startup> <5> Application: Audition
Ticks = 0      <2912> <AuLog.Startup> <5> Version 5.0.2
Ticks = 0      <2912> <AuLog.Startup> <5> Build: 7
Ticks = 78      <2912> <AuLog.Startup> <5> AuUI initialization sequence started...
Ticks = 78      <2912> <AuLog.Startup> <5> Initializing Crash Recovery
Ticks = 78      <2912> <AuLog.Startup> <5> Previous Crash Detected!!!
Ticks = 2044      <2912> <AuLog.Startup> <5> Initializing AuDSP
Ticks = 2044      <2912> <AuLog.Startup> <5> Initializing AuBackEnd
Ticks = 2138      <2912> <AuLog.Startup> <5> Initializing AuApplication
Ticks = 2247      <2912> <AuLog.Startup> <5> AuApplication initialization sequence started...
Ticks = 2247      <2912> <AuLog.Startup> <5> Initializing XML Loader
Ticks = 2262      <2912> <AuLog.Startup> <5> Initializing Application Settings
Ticks = 2262      <2912> <AuLog.Startup> <5> Intializing dva unit test and console
Ticks = 2262      <2912> <AuLog.Startup> <5> Initializing Audio Device
Ticks = 2325      <2912> <AuLog.Startup> <5> Initializing XMP System
Ticks = 2340      <2912> <AuLog.Startup> <5> Initializing AMIO Host
Ticks = 2340      <2912> <AuLog.Startup> <5> AMIO Host initialization sequence started...
Ticks = 2340      <2912> <AuLog.Plug-in> <5> Skipping AMIO plug-in: AmioAiff
Ticks = 2340      <2912> <AuLog.Plug-in> <5> Skipping AMIO plug-in: AmioApe
Ticks = 2340      <2912> <AuLog.Plug-in> <5> Skipping AMIO plug-in: AmioLSF
Ticks = 2340      <2912> <AuLog.Plug-in> <5> Skipping AMIO plug-in: AmioMp2
Ticks = 2340      <2912> <AuLog.Plug-in> <5> Skipping AMIO plug-in: AmioMp3
Ticks = 2340      <2912> <AuLog.Plug-in> <5> Skipping AMIO plug-in: AmioQT
Ticks = 2340      <2912> <AuLog.Plug-in> <5> Skipping AMIO plug-in: AmioWav
Ticks = 2340      <2912> <AuLog.Startup> <5> AMIO Host initialization sequence complete.
Ticks = 2340      <2912> <AuLog.Startup> <5> Session Host initialization sequence started...
Ticks = 2340      <2912> <AuLog.Plug-in> <5> Skipping Session plug-in: FinalCutXML
Ticks = 2340      <2912> <AuLog.Plug-in> <5> Skipping Session plug-in: LegacyXML
Ticks = 2340      <2912> <AuLog.Plug-in> <5> Skipping Session plug-in: OmfSession
Ticks = 2340      <2912> <AuLog.Plug-in> <5> Skipping Session plug-in: PremiereProInterchange
Ticks = 2340      <2912> <AuLog.Plug-in> <5> Skipping Session plug-in: SesxNative
Ticks = 2340      <2912> <AuLog.Startup> <5> Session Host initialization sequence complete.
Ticks = 2340      <2912> <AuLog.Startup> <5> Initializing Clipboard Manager
Ticks = 2340      <2912> <AuLog.Startup> <5> Initializing Preset Manager
Ticks = 2372      <2912> <AuLog.Startup> <5> Initializing Favorites Manager
Ticks = 2372      <2912> <AuLog.Startup> <5> AuApplication initialization sequence complete.
Ticks = 2372      <2912> <AuLog.Startup> <5> Initializing AsyncQueueManager
Ticks = 2372      <2912> <AuLog.Startup> <5> Initializing AuUI
Ticks = 2403      <2912> <AuLog.Startup> <5> Setting up temp directories
Ticks = 2528      <2912> <AuLog.Startup> <5> AuUI initialization sequence complete.
Ticks = 2652      <2912> <AuLog.DisplaySurface> <5>     Initialize PRM
Ticks = 2652      <2912> <AuLog.DisplaySurface> <5>     Initialize DS
Ticks = 2652      <2912> <DynamicLink> <5> Attempting to launch dynamiclinkManager
Ticks = 2652      <2912> <DynamicLink> <5> C:\Program Files (x86)\Adobe\Adobe Audition CS6\dynamiclinkmanager.exe
Ticks = 2746      <2912> <AuLog.DisplaySurface> <5>     DS Initialize succeeded
Ticks = 2746      <2912> <AuLog.DisplaySurface> <5> Video Panel is using the Display Surface
Ticks = 2918      <2912> <AuLog.Startup> <5> Initializing AuScripting
Ticks = 13214      <2912> <AuLog.Plug-in> <5> Loading AMIO plug-in: AmioWav
Ticks = 13229      <2912> <AuLog.Plug-in> <5> Audition Wave Amio plug-in. ID: 60df8553-00c8-4fd7-8a07-6f25e30ab79c
Ticks = 17332      <2912> <AdamEveAudioComponentEditorView::SyncParameters> <5> (from component) parameter out of range: index = 19, value = -0.251256
And here are some quick specs acording to System info
Item Value
OS Name Microsoft Windows 7 Professional
Version 6.1.7601 Service Pack 1 Build 7601
Other OS Description Not Available
OS Manufacturer Microsoft Corporation
System Name CHRISNEWMBOOK
System Manufacturer Apple Inc.
System Model MacBookPro11,3
System Type x64-based PC
Processor Intel(R) Core(TM) i7-4850HQ CPU @ 2.30GHz, 2301 Mhz, 4 Core(s), 8 Logical Processor(s)
BIOS Version/Date Apple Inc. MBP112.88Z.0138.B02.1310181745, 18/10/2013
SMBIOS Version 2.4
Windows Directory C:\Windows
System Directory C:\Windows\system32
Boot Device \Device\HarddiskVolume4
Locale Australia
Hardware Abstraction Layer Version = "6.1.7601.17514"
User Name ChrisNewMBook\Chris New MBook
Time Zone AUS Eastern Daylight Time
Installed Physical Memory (RAM) 16.0 GB
Total Physical Memory 15.9 GB
Available Physical Memory 13.5 GB
Total Virtual Memory 31.8 GB
Available Virtual Memory 29.3 GB
Page File Space 15.9 GB
Page File C:\pagefile.sys
The sound hardware found on this Macbook is a Cirrus Logic CS4208 (AB 94). Atm I'm using the stock drivers included with Bootcamp. Also, both Windows & adobe software are all up to date.
Can you please help me out?
Thank you

Because my main computer is a PC with CS6 & i'm usiing my macbook as a secondery PC. Yes I could use the mac version but all my projects are done on CS6 while I have CS 5.5 on the mac partition. Plus I'm not interested in updaing to CS6 for mac (if it's possible since ny CS5.5 is an upgrade from CS5).
Anyway I just want some help fixing up Audition for windows.

Similar Messages

Green Flashes on Preview screen and final produc when i add certain effects

When i add an effect, such as speed up a video clip, when it is rendered i get green flashes when i preview it and when it is fully rendered. Can anyone explain this, as it makes for very poor viewing.
thanks

Download MPEGstreamclip (I gave you the link in my previous post), it is free.
Then you'll need to export the clips as QT movie > ProRes or DV.
Read this useful tutorial:
http://discussions.apple.com/thread.jspa?threadID=2070861&tstart=0
Instructions apply to your case (dealing with h.264) too.

Pixelated vectors when applying effects?

For some reason Illustrator has decided to horribly rasterize my vectors whenever I attempt to apply effects. I've never had a problem with this before, it was fine one minute, the next, I'm getting these incredibly pixellated awful lookng mostrosities the second I open the effects gallery.
I've tried adjusting the raster effects (did it always rasterize the vectors when effects are applied? It never looked this horrbile before...), adjusting the dpi, enabling/disabling pixel preview or overprint preview, I've tried upscaling the vectors, downscaling the vectors, restarting my computer, reinstalling Illustrator, adjusting the power settings on my computer, blah, blah, blah- everything. NOTHING works.
Here's an example of what I'm talking about:
That object is about 2 inches in diameter, so it's not very small. I just don't get it.
What the hell's wrong with Illustrator?!!!!!
Any help would be way more than appreciated.
Thanks!

Star God,
What happens if you untick Align to Pixel Grid in the Transform panel?
Otherwise, you may try the following (you may have tried/done some of them already) and see whether it helps:
1) Close down Illy and open again;
2) Restart the computer;
3) Close down Illy and press Ctrl+Alt+Shift/Cmd+Option+Shift during startup;
4) Move the folder with Illy closed;
5) Look through and try out the relevant among the Other options;
Even more seriously, you may:
6) Uninstall, run the Cleaner Tool if you have CS3/CS4/CS5, and reinstall.
http://www.adobe.com/support/contact/cscleanertool.html

Why are my still images Blurry when applying effects?

I am creating a slideshow video using images with up to 18mp. The images look wonderful clear and sharp until I try and add video effects to the slide, like zooming in or panning.
I am a user of both CS5.5 at work and newly acquired CS6 for home. I like what I have been able to do, however this makes me very frustrated when everything looks good except for the images with effects. Should I be applying effects differently? or what?
Thanks,
G

>Didn't mean to start an argument
= Little Devil with a Grin !!!
Stick around for awhile... there is OFTEN a good deal of "healthy discussion" (ie-disagreement) that goes on here
That discussion brings out a LOT of different experiences (you say X doesn't work... but it works just fine for "me") that sometimes, maybe even often, leads to increased and/or new knowledge for everyone
Other times, you just need to realize that what works for "me" may, or may not, work for "you" exactly the same way based on your work flow
Read what everyone offers, try what you can... and make LOTS of notes so, over time, you will develop work practices that work best for you
Personal example...
Many people export out of PPro as MPEG2-DVD to then use Encore to author a DVD
My PERSONAL work flow is to export my AVCHD edits to Widescreen DV AVI to give to Encore... so I may use Encore's Automatic Transcoding setting to make a "best" fit of video length to size (single or dual layer) of DVD
This is because I just don't care to get into all the details of figuring out the PPro settings when exporting... I let Encore do all the math for me
That process works just fine for me... other people want to figure out their own math for the PPro export settings
I say what I do, and why, but I certainly do not TELL anyone else that they MUST do it my way

When I an apply an effect in the Effects Gallery,the stroke is affected,unwantedly?

When I an apply an effect in the Effects Gallery, for example for a picture of a cloud, the stroke changes too. How do I prevent the stroke from changing? I have Cs3/Cs2. If it has anything to do w/ the Appearance panel, I don't see a fill or stroke attribute when I click the cloud. Only when I deselect it.

You must select the fill only in the Appearance panel. Silly, but that's the way it is.

Applying effects to a specific frequency throughout an audio file in Adobe Audition CC

I would like to be able to isolate specific frequencies/sounds like a specific voice with background noise surrounding it. I want to segregate that one sound and locate all frequencies/sounds like that so I can apply clean-up effects to it like increase amplitute, etc.? Can this be done?

Well, I have good news and bad news.
You don't mention what version of Audition you're using but, if you're on the most recent (Audition CC) there's a very effective frequency band splitter (Edit/Frequency Band Splitter) which lets you split any clip into up to 8 adjustable frequency bands that can be worked on separatedly.
Now, the bad news. Taking your example of a voice, real world sound doesn't give you a nice, specific frequency that you can work on. A normal human voice is going to span from well under 200 Hz up to 8 or 10 kHz--there'll be a "fundamental frequency" (or range) that contains most of the information but the voice won't sound natural without the whole range--think "telephone" or even "AM radio".
Even worse, you're going to find that most noise is also pretty broad band, barring very specific things like 50/60 cycle hum from earthing problems or whatever.
By all means have a play but it may not work the way you want.

Adobe Media Encoder cuts off video layer when the Ultra Key effect is applied

I am working on a Mac (10.8.5) using the latest verison of Premiere Pro CC. I am using Ultra Key to remove the chroma key background from the "talent layer" and adding a "new background layer" behind the talent video layer. When I export directly from Premiere, the sequence exports as expected. However, I have many sequences, and wish to speed up the process using Adobe Media Encoder. When I export the same sequence using Adobe Media Encoder, the top half of the "talent layer" is completly cut off:
The issue has something to do with the Ultra key effect because when I remove the effect from the "talent layer" it exports in tact (with a chroma key background of course). Adobe Media Encoder CC is up to date as well; are there any known bugs with Media Encoder CC and the Ultra Key effect in Premiere Pro?
Thanks!

Black background of title turns color when adding fairy dust effect

I have iMovie HD 5. I created a title using the animated gradient effect with orange font color and with the "over black" box checked. i then went to add an effect to the title clip, the "fairy dust" effect. After the effect is applied, the black background changed to the orange font color. In the previews, the background remained black when I added the effect. What can I do? Thank you
-Annie N
iMovie HD 5 Mac OS X (10.4.4)

Welcome to discussions, Annie!
Please read this Apple Article:
iMovie: Adding effects to a clip with titles may make it become gray or tinted
http://docs.info.apple.com/article.html?artnum=301248
Sue

Applying effects

I have a new Retina Macbook with Yosemite. I recently downloaded Audition. I want to apply multi band compressor to my wav file to make the sound better with the broadcast effect (a custom one to my settings). When i hit apply, nothing happens, it just says "applying effects rack" and stays at 0% and "waiting..." forever. I am beyond frustrated with this and will let my trial period expire and purchase other software if this isn't resolved. It does the same thing in Multi track mode. Thank you

I don't know why it's doing that, because the multiband compressor works fine in the effects rack, regardless of whether you apply it to just a selection, or the whole file.
If you select the effect on its own, and try to apply it to your file without using the effects rack, does the same thing happen?

Applying effects to a small section of a track in Multi-track view, not recordin automation properly

Hello there!
Recording Automation of effects is not working properly.
In Mulitrack view, I'd like to apply effects sparingly to small sections of a particular track.
I have tried the different modes (Read, Latch, Touch, and Write).
All I'm trying to do is make the delay effect turn off completely for most of the track, but come in precisely on certain words within that track to provide a delay or echo effect on specific words, but not the entire vocal track.
Audition records the turning on and off of the effects, just not at all the way I programmed it.
Audition turns on the effects about 1 or 2 seconds after I told it to, so obviously it does not effect the words I want it to.
When I'm recording the automation I get it just right, but when I play it back, it does not effect the spots where I turned it on, it doesn't turn on the effects until a second or so after I had told it to !
I've tried everything, I did go into preferences and select "multitrack" and changed the "automation optimizations" to try to make it work, but to no avail, I changed the automatch time from 1 second to 0 seconds, then up to 5 seconds...admittedly I don't understand these "automation optimizations" but I tried all types of different settings.
All I want to do is to precisely automate the turning on and off of effects, for about 1 second at a time, to apply some delay to certain words withing th vocal track.
Now I know I can go to edit view and go through the entire track highlighting different words and applying the effects to them, but shouldn't I be able to do that non-destructively in Multi-track view through the use of Automation?
IF I must go through the entire track highlighting each word to apply delay to, then what is the best way: to first save another copy of that file so if I don't like the destructive edits the next day I can go back and restore the original file?.....What would be the best way to do this and wouldn't this way use much more space on the harddrive, wouldn't I have to duplicate entire vocal tracks and save them under a different name? What is the best way to do a workaround if I can't get automation to work correctly?
It would be great if someone could guide me through the easiest way of doing this, or better yet just tell me all the ways of accomplishing what I'm trying to do.
THANK YOU A GREAT DEAL FOR READING!

Thanks for your response Steve, I didn't explain things thoroughly enough which is why you thought I hadn't tried the automation twirl down that shows the automation lanes, yes I do know about that and did try it, let me try to explain properly:
I did try it with the automation lanes before posting here and it worked with the volume and pan etc... BUT, with the delay they only let you automate one of the delay parameters at a time, SO, for instance, I can ONLY automate one of the following parameters at a time relating to delay: "wet" or "dry" or "delay" or "feedback" or "trash" or "spread" or "distortion mode"
ALL I want to do is turn the entire effect ON for 1 or 2 seconds (using the exact delay settings I already set), and then have it turn OFF until a few bars later, when, again, I would like to apply the delay effect to another individual word or two and so on...But there seems to be no option to simply turn the entire effect on or off for certain segments of a track using the automation lane (unless perhaps I create 7 automation lanes for all the parameters)...but maybe I'm missing something...
SO, what I was doing was setting the automation to record changes during playback, then I was toggling the efx "on/off" button or "power" button (the one that turns green when on) and I was clicking that on or off for each word to record that into the automation.
It worked, it does turn the efx on and off, just not at all as I did it during the recording, there is a discrepancy between when I applied it during the automation recording process and when it turns off and on during playback...it's way late, but it does turn it off and on completely, just not in the same sequence which I intened it to record.
It would have been absoltely beautiful if it just played back the on and off toggles back as I had played it, I don't understand why it's late in doing so...
"sigh"
anyway, thanks for you help.
sidenote: let me know if you understand what I did, I'm not even sure if this was intented to be a function of audition, but really it almost worked...and if I guess and turn it on about a second before I want the effect to turn on (when recording the automation) then I can get it to land right on some words, if I do it just right, but too hard to guess and anticipate perfectly every instance I should apply the effect early during the automation recording process so I and I never get it to hit every word.
it seems it should just record it as i performed it, maybe there is some setting I am missing...any thoughts on this particular method?

Best practice regarding work flow (cutting, applying effects, exporting etc)

Hi!
I've been asked to shoot and edit a music video for a friend of mine, and I'm trying to figure out the best way to manage this project in PrE (in what order to do things and so on). I have a picture in my head which make sence, but I'd like to have it confirmed. If you've been following the "Very disappointed with Premiere Elements" thread, you know I'm not a fan of how the applying of effects works, when having a lot of cuts between scenes and clips etc. A few of the steps below is meant to make that process more effective.
So, here's my idea, from the begining and in detail:
1. Download the appropriate clips from the camera (in this case 1280x720, H.264 mov's from an EOS 500D).
2. Create a PrE-project for each clip and maybe trim the in and outs a bit, if needed.
3. Export each clip to uncompressed avi's.
4. Create the main project file and import all the uncompressed avi's.
5. Insert the clips in on appropriate tracks in the timeline.
6. Do all the cutting, triming and sync as complete as possible, without thinking about effects.
7. When finished, open up each of the smaller clip projects and add the desired effects. This will mainly include contrasts, color corrections, noise etc, in order to get the right look and feel to each clip/scene.
8. Again, export the clips to uncompressed avi's and overwrite the previous versions.
9. Open up the main project, which now should contain the clips with look-and-feel effects visible.
10. Add some additional effects if needed.
11. Export/share, and you're done.
Of course I will end up going back and forth through these steps anyway, but as a basic plan it seems reasonable. I see three main positive aspects:
1. The look-and-feel effects will be applied on the raw material, before the converting process. This should result in a slightly better quality. Perhaps not noticeable, but anyway.
2. The main project will be more CPU friendly and easier to work with.
3. If I want to tweek the look-and-feel effect to a clip/scene, I don't have to do it on every split (I will have a lot of splits, so applying and changing the effect parameters will be time consuming and ineffective). Of course, opening up the clip's specific project, changing the effect and then export to avi, will also take time, but point 1 and 2 makes up for that.
Have in mind that it is a music video project, to put things in the right context. We'll probably have a few parallel stories/scenes, with lots of cutting in and out between them. The timeline will probably look insane.
So, am I thinking in the right direction here? Any traps I might fall into along the way?
Regards
Fredrik

Fredrik,
Though similar to your workflow, here is how I would do it.
Import those "raw" Clips into a Project, and do my Trimming in that Project, relying on the Source Monitor to establish the In & Out Points for each, and also using different Instances of any longer "master Clip.". I would also do my CC (Color Correction), and all density (Levels, etc.) Effects here. Do not Trim too closely, as you will want to make sure that you have adequate Handles to work with later on.
Use the WAB (Work Area Bar) to Export the material that I needed in "chunks," using either Lagarith Lossless CODEC, or UT Lossless CODEC *
Import my music into a new Project and listen over and over, making notes on what visuals (those Exported/Shared Clips from above) I have at my disposal. At this point, I would also be making notes as to some of the Effects that I felt went with the music, based on my knowledge of the available visuals.
Import my Exported/Shared, color graded Clips.
Assemble those Clips, and Trim even more.
Watch and listen carefully, going back to my notes.
Apply any additional Effects now.
Watch and listen carefully.
Tighten any edits, adjust any applied Effects, and perhaps add (or remove existing) more Effects.
Watch and listen carefully.
Output an "approval" AV for the band/client.
Tweak, as is necessary.
Output "final approval" AV.
Tweak, as is necessary.
Export/Share, to desired delivery formats.
Invoice the client.
Cash check.
Declare "wine-thirty."
This is very similar to your proposed workflow.
Good luck,
Hunt
* I have used Lagarith Lossless CODEC with my PrE 4.0, but have not tried UT. Both work fine in PrPro, so I assume that UT Lossless will work in PrE too. These CODEC's are fairly quick in processing/Exporting, and offer the benefit of smaller files, than Uncompressed AVI. They are visually lossless. The resultant files will NOT be tiny, so one would still need a good amount of HDD space. Neither CODEC introduces any artifacts, or color degredation.

Won't let me apply effects

Everything in iMovie HD 6 seems to work fine apart from not being able to apply effects. I've tried most of the effects. I have no problems changing settings. It even renders or looks like it's rendering but nothing changes with the clip. It's the same as it was before.
Can anyone help?

same thing.
had my imac harddrive replaced and now the quartz composer effects dont work. I've been researching for the past 3 hours. Does anyone have the answer to this.
I'm led to believe it has to do with not having the latest codecs? or something is off with my quartz composer (tho i see it renderin in preview) or this is just a bug that no one has the answer to.
won't somebody help georgieporge and I?

Powerpoint 2013 causes IExplore to crash when previewing an embedded youtube video

Powerpoint 2013 causes IExplore to crash when previewing an embedded youtube video
As a user with "local administrator" or "Power User"privileges the video previews the video plays, but as a normal user the following error occurs.
Internet Explorer has stopped working
A problem caused the program to stop working correctly. Windows will close the program and notify you if a solution is available.
Debug or Close Program
Event Viewer details are as follows:
Log Name:      Application
Source:        Application Error
Date:          28/01/2015 11:22:32
Event ID:      1000
Task Category: (100)
Level:         Error
Keywords:      Classic
User:          N/A
Computer:
Description:
Faulting application name: IEXPLORE.EXE, version: 11.0.9600.17496, time stamp: 0x546fddcc
Faulting module name: iertutil.dll, version: 11.0.9600.17496, time stamp: 0x546fee66
Exception code: 0xc0000005
Fault offset: 0x000e53a8
Faulting process id: 0x15ec
Faulting application start time: 0x01d03aecb5356af2
Faulting application path: C:\Program Files (x86)\Internet Explorer\IEXPLORE.EXE
Faulting module path: C:\Windows\syswow64\iertutil.dll
Report Id: f311913d-a6df-11e4-bf49-8019346e8858
Event Xml:
< Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
    <Provider Name="Application Error" />
    <EventID Qualifiers="0">1000</EventID>
    <Level>2</Level>
    <Task>100</Task>
    <Keywords>0x80000000000000</Keywords>
    <TimeCreated SystemTime="2015-01-28T11:22:32.000000000Z" />
    <EventRecordID>30194</EventRecordID>
    <Channel>Application</Channel>
    <Computer>ALMETMP566-W7.midkent.ac.uk</Computer>
    <Security />
</System>
<EventData>
    <Data>IEXPLORE.EXE</Data>
    <Data>11.0.9600.17496</Data>
    <Data>546fddcc</Data>
    <Data>iertutil.dll</Data>
    <Data>11.0.9600.17496</Data>
    <Data>546fee66</Data>
    <Data>c0000005</Data>
    <Data>000e53a8</Data>
    <Data>15ec</Data>
    <Data>01d03aecb5356af2</Data>
    <Data>C:\Program Files (x86)\Internet Explorer\IEXPLORE.EXE</Data>
    <Data>C:\Windows\syswow64\iertutil.dll</Data>
    <Data>f311913d-a6df-11e4-bf49-8019346e8858</Data>
</EventData>
< /Event>
Process for creating a test file is as follows
Via youtube and your preferred browser, search for any video file (eg rubik's cube), select a video and start to watch it. Choose Share, Embed and copy the link information (eg <iframe width="560" height="315" src="//www.youtube.com/embed/MaltgJGz-dU"
frameborder="0" allowfullscreen></iframe>)
Close browser and create a new powerpoint 2013 presentation.
Insert, Video, Online Video
In the "From a Video Embed Code" box, paste the link information then click the arrow to apply
Save the file and then Right Click on the file and Preview.
In advance of the creation/running, I've applied the following KBs to the machine(s)
kb2817636 & kb2837627
As i said at the start, members of the Power Uses or Administrators group don't have this issue - but as 99% of our users are "users" and not really an option to make them all members of PU group.
Same also happens if the computer is removed from the domain. Admin & power users work, standard users crash IE.
Uninstall and reinstall of Office 2013 and IE11 has no apparent difference.
Assistance in this is appreciated.
Thanks
Jon

hi Jon, do you have all available updates installed for your PowerPoint? Install the two KB in the links below, then test again:
http://blogs.technet.com/b/bgp/archive/2014/04/09/support-for-youtube-videos-in-powerpoint-returns.aspx
Flynn

RoboHelp 11 - When previewing topics from within the project, a script error displays: 'HHComponent Activator' is undefined. How do you get rid of this script error?

RoboHelp 11
When previewing topics from within the project, a script error diplays: 'HHComponent Activator' is undefined.
How do you get rid of this script error?

Hi there
Have you tried clicking Help > Updates and applying the service release?
If not, I'd start with that.
Cheers... Rick

Hi i am currently editing clips in premiere pro cc but everytime i go to change the speed not the duration of a clip it will not let me select it - also when i go to effect controls it will not let me select time mapping? please help

Hi i am currently editing clips in premiere pro cc but everytime i go to change the speed not the duration of a clip it will not let me select it - also when i go to effect controls it will not let me select time mapping? please help

savannahp
What version of Premiere Elements and on what computer operating system?
Please review the following that I excerpted from an older post here regarding Adobe's PRE_help comments about Hollywood Effect and mention of
Red Noir. Does any of the following apply to any of what is happening to you.
- Whenever I try to add an effect from the Hollywood Looks menu, it brings up a warning that all my previous effects on that clip will be deleted. However it will let me add those same effects *after* applying Hollywood Looks.
This is because of how the Hollywood Looks are designed to be used. Since these are effect presets (multiple effects in combination) that result in a specific "look"; they are best applied in isolation. If any previous effect is applied and we still allow a Hollywood effect to be applied, we will not be able to see what the effect does clearly. For e.g. if you already have a Gaussian Blur effect applied to your clip, and then we allow you to apply the "Red Noir" Hollywood effect, the fact that the "Reds" in the scenes will be highlighted and the others converted to B/W will not be clearly seen since the content is already blurred out. So any previously applied effects was designed to be removed. This holds good even if you apply a Hollywood look "on top of" another one. The previous one will be replaced. Having said that, you can customize the look further by either tweaking an already applied filter or by adding a newer effect on top. That is the reason you can apply an effect on top of the Hollywood Effects and not vice versa.
Please review and consider and then we can proceed from there if necessary.
ATR

Audition 6 Crashen when previewing or applying effects

Similar Messages

Maybe you are looking for