Audition CS5.5 is not working well with Microsoft Mouse "smooth scrolling" feature

Hi,
I'm testing with the Audition CS5.5 and found that the mouse scrolling (I use it mainly for zoom, zooming in and out to see the waveform) is just not working well and sluggish, and finally I figured out it somewhat related to the "smooth scrolling" of Microsoft Mouse. Anyone with the same problem? In fact the scrolling is working very well for Audition 3.0.1, I don't know why it fail for CS5.5.
Best regards,
Steve

The trial version is the same as the full version except
for the 30 day limitation.
I think on windows xp you need sp3 for cs5 to work as expected.
Anyway that's what is says here:
http://www.adobe.com/products/photoshop/photoshopextended/systemreqs/
That may not be the problem, but it's a good place to start.
Also it's not a good idea to post your email on the forums.
MTSTUNER

Similar Messages

  • New FocusTraversalPolicy Mechanism Does Not Work Well With OO Designs

    I would like to complain about the new focus traversal mechanism not working well with object-oriented GUI designs.
    Specifically, we have many reusable panel classes that can be swapped in and out of reusable dialog classes. On some of these panels, the default focus traversal is not what is desirable, perhaps because one component on the right side of the window is just slightly higher than a component on the left side, maybe due to the component on the right having a label on top, and so the default focus goes to the component on the right instead of the left. So we have a need to be able to explicitly define the order of components in some panels.
    If I try to define a focus traversal policy in the panel's constructor, a NullPointerException is thrown because the panel's focus cycle root is null (the panel has not been added to any dialog or frame yet).
    If I try to associate a focus traversal policy at the dialog level, it would have to explicitly reference its child panels' inner components, which would break the encapsulation of the panels. It would also make it hard to have generic dialog classes into which various reusable panel objects can be swapped.
    Someone suggested making each panel a focus cycle root. This makes it hard to "break out" of one panel to move on to the next panel in the dialog. Special keys would have to be assigned to try to cycle out, and these keys would have to be different than the normal traversal keys, making them inconsistent and nonintuitive to the user. Also, the focus policy would have to know if the dialog had more than one panel, what order the panels were in to know whether to cycle to the next panel or not, etc. This is a mess.
    Does anyone have any idea how to get around these problems? I have tried using a global focus policy with a global hash map of prev/next component key-value pairs, but we are still running into trouble with some deeply nested tabbed dialogs. It's just not possible to always have the focus cycle root in existence at the point where you want to explicitly define traversal between two components, or when you are trying to establish the default component for a panel in a tabbed pane.
    Has anyone else run into similar issues?
    Robbie Gilbert
    [email protected]

    I agree completely. One of the popular consultants on this forum stated that the new focus mechanism was more versatile and only a little more complex. I would say it's more than a little complex given the trouble average programmers are having understanding how it works...at least at first...and after understanding it realizing that they are going to have type their fingers off to update their code. Oh, and the dread of maintaining this awful mess.
    I'm currently having the same problem as you Robbie. Some of my reusable panels need special tab ordering...that's not usually a problem, in most programming environments, till now. Now I have to go around the world and back just to get my stupid cursor to be in the right place when I hit the tab key??!!! and special key mappings just to get out of a focus cycle...lame.
    And how is an IDE graphical designer going to work with this? It's not, that's how...ok maybe if some kind person or company creates a custom focus traversal policy editor of some kind, I don't know.
    Good grief Sun! We need something to help us meet our deadlines, not solutions that force us to spend 80% of our time customizing every stinking bit of UI functionality we need!!!
    JTables are even worse. I've mastered most of the garbage that is JTable after many months of pain and I don't know how I'm going to help my peers understand them in any short amount of time. Most of them were Oracle Forms programmers, not that that is any great solution either. But they will likely have problems.
    In conclusion, I wish I had chosen another UI technology for our new product client, and may yet.

  • How do I know if this update is appropriate for Windows Vista? I have done updates before, only to discover that they did not work well with Vista.

    I keep getting a message that I need to update to firefox version 7. I can't find any information to help me know if this version is compatible with Vista. I did an "automatic" update in the past, and needed to uninstall it because it did not work well with Vista. firefox is not giving me any info regarding this - it just says install it.

    http://en.wikipedia.org/wiki/History_of_Mozilla_Firefox
    http://en.wikipedia.org/wiki/Firefox
    thank you

  • The App Nike   Running is not working well with my Ipod touch 5 th generation It always gives me the wrong distance and velocity. Is it normal? What could I do?

    The App Nike   Running is not working well with my Ipod touch 5 th generation It always gives me the wrong distance and velocity. Is it normal? What could I do?

    Are you using the shoe sensor?
    Try:
    http://www.apple.com/support/nikeplus/troubleshooting/

  • My Ipone 3gs do not work well with iOS 6, can I go back to an earlier version?

    Hi
    I have always (maybe stupid!) updated my iOS version when itunes has proposed it, thinking my old iPhone 3 should work better. It is now clear for me that it is not the case!
    Can I go back to an earlier version so I can use the phone as it was meant to work?
    Have read something about if you have not save the "protocol" from an earlier version it is impossible!
    The question is also justified for all my other iPhones and Pad in my family, should I stop updates iOS versions on them as oblivious thy are becoming useless with the time, or?
    Best reg. Bilo

    Hi, excellent with all quick answers!
    It was not really meant to be rude to wjosten, but his answer was really short, short and did not help me with my problem.
    I'm surprised to hear that your 3gs is working well!
    My main reason to continue with my 3 gs (I have a iphone 5 also) is to use the GPS function in it. but from the moment I upgrade it to iOS 6.0.1 the GPS is not working well. I can not say if it is becase it is too slove or something is not supporting it. It does not matter if I use it in combination with Google Maps our my TomTom app.
    It is loosing the GPS all the time.
    The second problem is also that the 3gs is not working anymore in the TomTom car mounth holder.
    TomTom are making them so they are only working for iphone 3 (so my other 2 iphone 4 have never worked in it, but it  is in that way).
    I do not know if it is the TomTom software which is not supported by iOS6 or what...
    As I can only use the holder for my 3gs it is awast if the mobil is not working...
    Reb. Bilo

  • Why ps3 is not working well with airport

    why ps3 does not work well wth the airport?

    If you are referring to online gaming, then PS3 like all non-apple devices uses upnp to open ports.
    Apple uses NAT-PMP to open ports.. East and West.. never the twain shall meet.
    If it is internal wireless issues.. that is different.. airport should be just like any other wireless router.
    If you tell us the issue we have more hope to help.

  • Help, my Bridge does not works well with my AfterEffect. does not preview .ffx files

    Hi,
         I have some problem with my Bridge. When i browse preset from my After Effect in Bridge, it won't preview all of the After Effect preset(*.ffx), but my Bridge works well with photoshop files, it will preview all the photo files inculding .PSD. Does anyone knows what's the problem? Anyone knows how to fix it? I need help to fix this problem to get my work in AfterEffect, it is very hard to get things work it won't preview the preset. Thanks.
    Best Regrads,
    Chongkkmy

    Found this link, does it address your problem?
    http://forums.adobe.com/click.jspa?searchID=769246&objectType=2&objectID=1794899

  • Audition CS5.5 not working on 2014 MacBook Air

    Greetings!
    Just upgraded computers (from a 2008 MacBook) to a 2014 MacBook Air (13", Early 2014).  I had Audition CS5.5 on my old Mac so I deactivated it, installed it on the new Air and activated it.  Everything seemed to install smoothly, but when I open the program and open an audio file, it just doesn't work, plain and simple.  I hit play and nothing happens. I try with the spacebar and nothing happens.  The play button lights up, but nothing plays.  I can add effects to tracks and see that changes are being made in the waveforms, but can't listen back.  Even after making changes, I cannot save those changes.
    The specifics:
    13" MacBook Air (Early 2014)
    1.4 GHz Intel Core i5
    4GB 1600 MHz DDR3
    Running OSX Yosemite (10.10.3, same as my old MacBook with no issues)
    As for Audition, it's CS5.5.  There don't appear to be any updates available.  I know that I can upgrade to CS6 and I have no problem paying the upgrade charge, but will only do so if I know for a fact that the issue will be resolved.  And honestly, unless there are earth-shattering updates, I'm perfectly happy with 5.5.
    So there it is.  Anyone have any ideas what the issue could be?  I've done some searching, but can't seem to find anyone with the exact issue I'm having.  Thanks in advance for any help you can provide!

    Thanks ryclark! 
    I checked the audio settings and all appeared to be right. Just to be safe, I re-selected the correct options.  The right drivers were also installed, but again, I re-selected it just to be sure.  And viola!  It worked!
    Very strange.  So essentially I changed nothing, but not it works.  Can't thank you enough for the speedy response!

  • DNG 5.4 does not work well with Olympus E-620

    I just installed the DNG converter 5.4 to use with the RAW ORF files from my new Olympus E-620.  The converted images are not the same as the jpg images or the RAW images as converted by the Olympus Master software.  They are duller in the highlights and darker in the shadows.  The difference is NOT small and is readily noticeable in the image and when comparing the histogram.  It looks like part of the problem may be that the Olympus automatic gradation may not be interpreted properly, but the difference is even more than just this.  I can turn this on and off in the Olympus Master and the difference is similar but a greater difference than just this alone.  Further, the Olympus Master software cannot open the DNG files.
    I would also like to rgister my high dissatisfaction with the short life of the Adobe software due to the new RAW converters not working with older Photoshop or Lightroom software versions.  I am using Lightroom 1.2 and PS CS3, and I do not want to spen the considerable cost of upgrade only to be able to convert my RAW files.  Also, I do not like to have to convert my RAW files to DNG first, because I loose some of the editing options that I can only do in the Olympus software, and it creates another step in my workflow.

    shedridc wrote:
    The converted images are not the same as the jpg images or the RAW images as converted by the Olympus Master software. 
    Well, doh...since Camera Raw is using it's own processing parameters and algorithms, the odds of ACR "matching" the camera makers software is not real high. At some point when ACR 5.4 is finally released Adobe may have some additional DNG Profiles for the camera that may make color a closer match but the tone curve will prolly always needs tweaks. It would behoove you to either create presets that you can apply in Bridge or alter your ACR "Defaults".
    shedridc wrote:
    I would also like to rgister my high dissatisfaction with the short life of the Adobe software due to the new RAW converters not working with older Photoshop or Lightroom software versions.
    It's been Adobe's policy to only support currently shipping products. As such, customers who upgraded to Ps CS4 can expect about 18 months of free support and Camera Raw updates. Fact is that while you WERE a current customer when you bought CS3 and you got 6 free ACR updates (ACR 4.6 was the last version for CS3), you are no longer a current customer.
    You may not like the DNG Converter step, but that's what you have if you wish to use your new camera with your old software...your other alternative is, of course to simply use the software that came with your camera.

  • Wifi not working well with cover on

    My Mac Mini is loosing tons of packets via wifi to my Airport Extreme. I test with a ping to 10.0.1.1 and my mac mini is on 10.01.55. If I remove the cover it works very well, packet loss is zero. If I install the cover (enclosure, whatever!), problem starts up again. If I put my hand over where the wifi antenna is, touching the side of the mini, the connection returns to normal.
    I thought it was the network card so I got a brand new one, installed it and got the same packet loss. I have re-checked the connection to the board and the connector is well seated, nothing loose so it isn't that. It is also not a loose wire.
    Anyone with same problem and a fix?
    Thanks.

    First try to change the wireless channel.
    If does not help do a reset of your apple Extreme / express, and do the setup again.

  • Firefox 4 is not playing well with Microsoft Office 2010 32-bit on my Windows 7 64-bit laptop.

    Since I loaded Office 2010 Firefox 4 has been acting up. Sometimes you can click on a FF4 window and it will not activate. Other times, when you are trying to select an item from a listbox, you can not select it. The listbox closes without anything being selected. FF4 worked fine until I installed Office 2010 32-bit. (from the HUP program so the price was right.) IE9 seems to work fine.

    Hi ITBobby85,
    If the excel version in the Connection Manager is Microsoft Excel 2010 (.xlsx), we should use Microsoft.ACE.OLEDB provider.
    We can't install 32bit and 64bit parts of office on the same machine. We will get an error as you said when we run the installer to install the 64bit version of the Microsoft Access Database Engine 2010 Redistributable in the machine where a 32bit version
    of Microsoft Office installed. To fix this issue, please download and install the 32bit version of the Microsoft Access Database Engine 2010 Redistributable with the link below:
    http://www.microsoft.com/en-us/download/details.aspx?id=13255
    Thanks,
    Katherine Xiong
    Katherine Xiong
    TechNet Community Support

  • Aluminum Apple Remote not working well with Keynote '09 v.5.0.4

    I have an i7 17" MBP and I purchased the aluminum remote to go with it. I do training/presentations for a living and generally halfway through various presentations, the remote will stop controlling them. Sometimes if I restart Keynote it will work again. Sometimes I have to reboot the computer. Other times it just doesn't work at all.
    I can use it with my 2007 G4 17" MBP, but I haven't used it enough to see if it develops the same issues as the i7.
    I've gone to Preferences > Security > General and tried to pair the remote with the laptop, but holding down the Menu and Next keys at the same time for a few seconds...or minutes... does not bring up the "paired" graphic. I've tried the Menu button and every other key, just to be sure, with the same lack of result.
    What the hey? (And, no, "Disable remote control infrared receiver" is not selected.)

    I have the white remote stop working on my new 15"MBP occasionally too. Same as you described in the post, it happens pretty randomly. I can get it back to work doing a unpair/pair under system preference panel though. It ***** but better than restarting the computer like you did, try that next time, just takes seconds...
    after reading your post I guess I'll give up on trying to buy a aluminum remote. Logitech R400 looks very promising, if you give presentation all the time it might worth the investment.
    cheers!

  • Apple TV not working well with time capsule

    So, I have an apple time capsule which serves two functions: wifi base station and the repository for my massive iTunes library. I connect this via wifi to my Apple TV (not sure which generation it is). The media seems to play well when I play it on my computer, but the Apple TV has a very hard time playing it, sometimes not even showing pieces of media I know are there. Also, doing airplay from my computer or iPad to the Apple TV is very inconsistent. Also experience the same playing issue with netflix. I have recently resorted to watching most things on my iPad and experience no problems.
    Suggestions? One thing that comes to my mind is to do a factory settings reset on the Apple TV. Would that do anything?

    Hi zachfromind,
    Welcome to the Apple Support Communities! I understand you are having issues with content on your Apple TV. It sounds like you have everything set up correctly and you are very aware of how the content should be displayed and played. At this point yes, I would suggest restoring the Apple TV back to factory settings and then joining it back to your network and testing. It sounds like you are familiar with the process but you can use the following article for reference if needed.
    Apple TV (2nd and 3rd generation): Restoring your Apple TV
    http://support.apple.com/kb/ht4367
    I hope this helps,  
    -Joe

  • Office 2010 not working well with iCloud

    I am using Office 2010 Home & Business on a Windows 8.1 64 bit computer, and my calendar, tasks and contact list sync with iCloud.
    I am noticing lately (since installing Windows 8, perhaps), that when entering an appointment (in Calendar), it takes several seconds to "register" whereas before it was immediate.
    I also find that when I switch from Calendar to Mail or Mail to Calendar (or Tasks), it also takes several seconds.
    Is there a fix for this?

    Hi
    It can be resulted from the permission for Office related files and folders.
    Create a new standard user account to check.
    Login with your admin account.
    Check permission for folders related to your Office program(Right click>Properties>Security>Set full permission to all user account)
    Login with new user account and try to run Office program.
    If the issue persisit, check the following article to see if it helps:
    http://office.microsoft.com/en-001/support/why-cant-i-start-my-office-2013-application-HA104011864.aspx
    Tylor Wang
    TechNet Community Support

  • My 2006 Imac running 10.4.11 is not working well with my new apple keyboard

    just bought a new apple keyboard - wired full keyboard - The Funtion keys will not respond as marked.
    for example, the f12 key, marked Volume up, brings up my dashboard.  
    The only function keys that I can change are f1 and f2.
    In the keyboard shortcut of Preference, there is not even a listing for volume.
    And no, I am not going to update my OS beyond 10.4.11
    Help

    It's a USB keyboard it should be fine. I have a similar model that works on 10.5.
    If it doesn't work you can almost certainly return it (local sales laws apply, so check those).
    You could also go to an Apple Store (or any other PC store) & ask them if it could work & ask if it doesn't work can it be returned?
    You can search Ebay or Amazon etc for a keyboard that says it supports 10.4, however since that OS is also 10 years old not many manufactures are willing to test an ancient OS that not many people use anymore.
    Another option is to find a second hand keyboard from the same era of Mac. Frankly that would be 'icky if it has been used.
    Alternately you could try fixing or cleaning yours, but these things don't last forever.
    Keyboards & mice generally work.

Maybe you are looking for