Audition CS5.5 mouse scrolling issue

Not sure if this has been asked or even resolved. I am having a hell of a time zooming in/out with the mouse scroll. I have a feeling its my mouse but the problem only happens when using Audition CS5.5.
I have to pretty much fling the scroll wheel in order to zoom. The scroll wheel works fine in other programs (ie: IE, Firefox, Word, Outlook, etc.) It worked fine in Audition 3.0. Another person in the building has a wired mouse with the same computer and scrolls fine, but I havent had a chance to try out a wired mouse on mine to test. I am using a USB wireless mouse. I can use the scrolling zoom on the mouse pad and that works. But didn't know if anyone else had an issue with their mouse.
Edit: It scrolls Vertically in multi-track with scroll wheel... but not horizontally in multi-track or edit view.
Message was edited by: marc61880

Thanks for coming back and explaining the issue. It doesn't happen very often, but it can be a lifesaver for others who might have the same problem down the road.

Similar Messages

S12 Windows 7 - Mouse scroll issues and tapping won't stop.

I recently purchased an S12 Ideapad for my girlfriend for her studies and installed Win7 in the process. It works perfectly aside from one tiny issue. We can't get it to stop left clicking when tapping the mousepad surface and the vertical scroll area on the rightside of the pad does nothing.
I've tried installing the official Lenovo drivers for Win7 as Administrator / Then with Vista Compatabillity and then finally using the generic Synaptics drivers - but no luck, the options just doesn't appear in the Synaptics configuration menu of the mouse. All I can change are the functions of left click and right click. My old MEDION laptop has all the functions I am looking for in that same menu.
Has anyone else experienced this and/or know of a solution to this annoyance?
Windows 7 Ultimate
S12 Ideapad
S/N: EBxxxxxxxx
Lenovo Driver used : http://consumersupport.lenovo.com/en/DriversDownloads/drivers_list.aspx?CategoryID=733830 (The Touchpad one for windows with the funny typo Touch >I< pad title)
Synaptics Driver used : http://www.synaptics.com/support/drivers ( The 32bit one for Windows 7)
Regards,
Anders Hermansen, Denmark.
Moderator Note; s/n edited for members own protection

Hi and welcome.. you can try
alternate driver for touchpad ( i used since W7 beta and RC.)
v13.2.6.1 Vista x86/64 and WinXP x86/64 DriverVer=07/20/2009, 13.2.6.1
---> Here <---
An Overview of driver settings with english screen pics you find here Touchpad Synaptics Menue translated ger-eng
not a driver but i install it on all synaptics touchpad machines
all time cool internet surf fun and full touchpad fun a must in all cases....
---> Here <---
sincerely KalvinKlein
Thinkies 2x X200s/X301 8GB 256GB SSD @ Win 7 64
Ideas Centre A520 ,Yoga 2 256GB SSD,Yoga 2 tablet @ Win 8.1

Mighty Mouse Scroll Issue

I have a strange problem with my mighty mouse. On my Mac I have 2 separate logins - both with admin. The scroll up and down works with one of the logins but not the other. I have tried over and over with both logins, turning the scroll on and off but it remains the same. It's obviously not a mouse problem - does anyone know what may be causing this?

I found this : Mouse won't scroll for one User but works for another : answer posted by a knowledgeable user.
While it doesn't match your issue exactly, its similarity indicates a possible solution. Easy enough to try anyway.

Mighty Mouse Scroll Issue - Application Specific

So, I just got a bluetooth Mighty Mouse and have a strange issue. I have one program where it simply won't scroll? All other programs function properly, so I have a decent connection. It's just this one database program (Panorama), which runs our business applications that won't scroll?
I already have a BT Mighty Mouse on my laptop and it works fine with this program? Any thoughts as to where to begin trouble shooting? I've tried everything I could think of and don't know what else to try.

No help huh? I have spent literally hours trying to figure this out. One solution, which I can't try is reinstalling the software for the bluetooth wireless mouse. This really ticks me off...I just ordered this machine and it arrived a couple of days ago, set it up and all is fine except for this issue. I'm going through the package shipped to me by Apple (I upgraded my keyboard and mouse to bluetooth when I configured the machine and ordered in online from apple). THERE IS NO DISK FOR THE WIRELESS KEYBOARD OR MOUSE IN THE PACKAGE!!! What the heck. Shouldn't there be? I can't seem to find the software anywhere on line, so how am I supposed to reinstall the software to see if that clears my problem? Aaaahhhh.....

Any fix for MS mouse scrolling issue?

Hey there. I've somewhat recently come into a problem where my Microsoft wireless mouse won't scroll through the iTunes library with the scroll wheel.
I've done other searches, I've seen others with the same problem, but no solutions.
Is this a permanent issue between the Microsoft mouse and the iTunes program that we have to wait for an official fix, or did something go wrong in my installations and I can fix the problem myself? (I have the newest IntelliPoint drivers and the newest version of iTunes).
The problem wasn't evident in XP, so it's probably a Vista vs. iTunes thing, but I wanted to make sure I wasn't doing something wrong or if there was an easy fix for it.

***** to have to buy a new mouse to fix the problem, I like how this mouse feels and moves (sigh..I love censors)
I guess when this one is about ready to be replaced I'll turn to logitech, but hopefully some sort of patch or fix will be introduced to let MS mice scroll in iTunes lol
Message was edited by: iwuv10s

Magic mouse scrolling issue

- I am having a weird problem with my magic mouse; it scrolls through pages with no problem, but will not function within flash games. It used to, beautifully in fact..now no response other than the page itself moving. i am running lion, 10.7.5 on a macbook pro. i have downloaded all updates since original purchase (about 7 mos ago)..i don't play flash games every day so i can't pinpoint when this started..???

Possible clues...
https://discussions.apple.com/thread/2522669?start=0&tstart=0

Mouse Scroll Issues

I've had my iMac since June and have had trouble with the mouse. The "scroll up" feature doesn't work intermittently. I'm on my second mouse now. The scroll up feature on the first one just totally stopped working after 2 months. It just started on my second one the other day.
It's the wireless mouse. Any ideas?

I had intermittent scrolling problems with my wireless mighty mouse, but never did confirm it was a mouse problem, as opposed to software or EMF. I did follow Apple's instructions for cleaning the scoll ball - http://docs.info.apple.com/article.html?artnum=302417 - but don't know that it had an effect.
Finally gave up and switched to M$ wireless laser mouse 8000 and have been very happy. It's a full four button programmable mouse, unlike MM. I like the ergonomics far better than MM and it works with the native bluetooth in my Al iMac and iBook G4. I couldn't find anywhere in the M$ kingdom that the mouse would work with Mac, but it did after installing the drivers. It comes with a bluetooth dongle, which I didn't need, so sold it for more than I paid for the 8000 mouse.
My iMac experience took a turn for the better after switching to the 8000.

Mighty Mouse Scroll Issues

I have a strange problem with my mighty mouse. On my Mac I have 2 separate logins - both with admin. The scroll up and down works with one of the logins but not the other. I have tried over and over with both logins, turning the scroll on and off but it remains the same. It's obviously not a mouse problem - does anyone know what may be causing this?

Isopropyl alcohol. Preferably 95% but I've done this with the typical 70%, so whatever you have in your medicine cabinet. With Mouse unplugged (powered off, battery removed for wireless mice,) put the mouse on a paper towel and pour a small amount of alcohol over the ball. What you are trying to do is get some alcohol down past the ball and into the internal rollers, which have some gunk on them that you're trying to remove. Isopropyl alcohol will not corrode the electronics and will help loosen and break up the gunk. Roll the ball and pour a little more. Repeat a few times. You will want to let everything dry as much as possible before using. Thus pouring a small amount and not the whole bottle and not "dunking" the mouse in a bowl filled with isopropyl alcohol. Do that only if you get really desperate, but if you do, then let it drip and air dry afterward.
There is not much space for the gunk to be "flushed" out so eventually this may not work. At which point you can look on Youtube and see several tutorials on disassembling the mouse. The mouse is glued together so this is not without risk. You may end up just buying a replacement mouse so just be prepared before attempting disassembly or even the alcohol.
(In case you're concerned, isopropyl alcohol has been used for cleaning around electronics for many, many, many years. Used to clean water/syrup/milk/juice damage since it doesn't corrode the circuit boards. While it generally doesn't conduct electricity, it was generally discouraged to use it on live equipment for various reasons. And due to skin irritation, gloves often were used, but in this case with the mouse and the small amount being used, it's up to you to whether you want to use gloves and eye protection.)

Magic Mouse scrolling issues in Yosemite

Ever since updating to Yosemite (10.10.1) on my MacBook Air (2014 - 1.4 GHz i5, 4GB ram), my Magic Mouse has been exhibiting some odd behavior. Often times when I try scrolling up and down a page in Chrome with a one-finger vertical motion, it decides to interpret the gesture as a one-finger right swipe instead, and ends up browsing back to the previous page. I have checked carefully and the scroll gesture I am making is definitely vertical, not at all horizontal or diagonal. Usually if I remove my hand from the mouse and try again it will be correct, though sometimes it takes a few tries. It's very annoying and only started happening after I updated to Yosemite.
Any ideas what could be causing this or how to fix it?

UGH my mouse is doing the same thing and it's ******* me off, I keep going back/forward between webpages when I only want to scroll. It seems 50/50 though...sometimes it scrolls, sometimes it just goes back but it's super annoying. Anyone have a fix?!?!?

Suggestion for Apple Magic Mouse scrolling issue...

I have a Magic Mouse, approximately 3 years old. Recently, and suddenly, the horizontal scrolling stopped working. I tried every fix I saw suggested, here and on other sites, with no success. I had resigned myself to the fact that I would have to part with another $80 to get another one (because I really do like it), or try a different type of mouse (but none other seems to offer what this one does). This mouse has lasted through 3 years of heavy use, 3 young boys learning how to use it, several drops, 1 complete non-Genius tear-down and re-build, a couple of liquid spills, etc. So I figured I had nothing to lose; it didn't owe me anything.
So I dropped it. I banged it on the desk. Pretty hard. 3 times.
And now the horizontal scrolling works. Just fine.
When all else fails, try the inconceivable (what, bang or drop an Apple product on purpose??!!). It worked for me.

Love to watch you do that with your computer or your TV. Be sure to post the video.

Audition CS5.5 is not working well with Microsoft Mouse "smooth scrolling" feature

Hi,
I'm testing with the Audition CS5.5 and found that the mouse scrolling (I use it mainly for zoom, zooming in and out to see the waveform) is just not working well and sluggish, and finally I figured out it somewhat related to the "smooth scrolling" of Microsoft Mouse. Anyone with the same problem? In fact the scrolling is working very well for Audition 3.0.1, I don't know why it fail for CS5.5.
Best regards,
Steve

The trial version is the same as the full version except
for the 30 day limitation.
I think on windows xp you need sp3 for cs5 to work as expected.
Anyway that's what is says here:
http://www.adobe.com/products/photoshop/photoshopextended/systemreqs/
That may not be the problem, but it's a good place to start.
Also it's not a good idea to post your email on the forums.
MTSTUNER

I have not found any answers yet to solve this problem. Smooth Scroll Auditions CS5

I used to used Audition 3 and when recording or playing back the recorded wave form would be smooth and when it reaches the right hand edge of the screen it just smoothly continues. I have updated to Auditions CS5 and I cannot get it to do the same. It seem to jump back to leave more room instead on continually scrolling. In the preference option there is no option I can see to change this. The only option shows Playback but this seen to also just jump back to leave more room. Any idea where the setting it so make is smooth? Thanks in advance

Hello Ryclark.. The playback is the same as record. Unlike AD3, when the waveform gets to the right had side of the time line it JUMPS back to make room for the continuing recording where the recording is longer than the width of the screen. After an online chat with Adobe support ( who do not seem to know how their software works) , in the end they said that the new feature was for the Cursor and Waveform to Jump back to leave room for the continuation of the recording....unlike AD3 which smoothly scrolled the waveform. It is a step backwards and looks like a novice attempt... So if anyone wants to know if there is a solution to this backward step the Answer it NO. It is a new Jumpy flow layout. Seems like Adobe are getting like Microsoft,,,

Audition CS5.5: Issues with Playback

I can't get anything to play in Audition CS5.5. I can do everything else in Audition except play or record files. I just got a new Macbook so my operating system is OX 10.9.3. Anyone know how to solve this issue?

"Device Class" refers to the audio driver model. You should see additional options for "Default Input Device" and "Default Output Device."
You should be able to view the different output devices available on your Macbook here. Make sure it's set to "Built-In Output", and "Built-in Microphone" for Default Input device. Click OK and attempt to play your file.
If this still fails, please let me know exactly what happens when it should be playing back. For instance, is the time counter moving the playhead traveling along the waveform, and the level meters bouncing along? Or does the Play button light up but everything just sits there?
Thanks.

CS5 Mouse scroll up jumps full page

I need some help. Just starting to use Flash but I've got this one issue that is just ruining everything for me.
When drawing on the stage, any upward movement of my scroll wheel scrolls the screen by at least half a screen width, if not more. Scrolling down works as normal, equivilent to a few lines at a time.
This problem seems to only exist in Adobe Flash. No issue in Chrome, Adobe Reader, Inkscape or any other program I've run. I've attempted to adjust the mouse settings, but they have no effect. Even disabling verticle scroll does not nothing.
Currently I'm using a Microsoft Wireless Mouse 6000 with Windows 7. I've tried using other mice and they've suffered the same fate. I've also tried updating the drivers as well as cleaning them out and reinstalling them. Nothing works. I've googled and searched these forums but have found nothing related to this.
Suffice to say, its making using Flash impossible.

I FOUND A SOLUTION!!
After a few searches, this article gave a work around: http://answers.microsoft.com/en-us/windows/forum/windows_7-hardware/mouse-scroll-wheel-not -behaving-correctly/84204cc1-097b-440f-ad16-aa92b6795465?page=1
Here is the relevant post:
my apologies -- I honestly didn't realize this was a non-technical forum. To execute the above workaround (assuming the "built in" drivers...aka the HID-compliant...are being used):
1. Start menu -> in search box, type "regedit" and hit Enter (click through UAC security prompts)
2. expand down through...
HKEY_LOCAL_MACHINE -> SYSTEM -> CurrentControlSet -> Enum -> HID
3. click around (expand the tree nodes) until you find a node named something like 6&xxxx that, when clicked, has something like Mouse or msmouse.inf appear in the Data column
4. expand to the 'Device Parameters' child node (of 6&xxx....) and click on it...you should see something like "FlipFlopWheel' appear in the Name column
5. [menu] Edit -> New -> DWORD
6. type in 'VScrollHighResolutionDisable' (no quotes) as the name
7. double click on your new DWORD and set the value to '1' (no quotes)
8. reboot, cross fingers, and retry your programs (if the programs are keyboard based, cross legs...just make sure to cross something....)
Microsoft probably has disclaimer text around modifying the registry by hand, but they also have disclaimers around using pre-release operating systems so you're already in unsupported territory (just don't delete or rename anything and you'll be fine).
in the quoted post, it says to look for something named "6&xxx". I didnt find anything named that, so looked through each folder/subfolder (from top to bottom) until i found the first one to have a value of "Mouse" (in the data column) and applied the changes, and rebooted computer.
Hope this helps.

Mighty Mouse sudden scroll issues on Mavericks

My bluetooth Mighy Mouse (a little ancient, but still works well for me) was functioning perfectly till suddenly the vertical scrolling increased speed rapidly, followed shortly by the horizontal scrolling failing completely. This all happened after an episode of letting my battery die to the point of power down, me plugging in the Mac, giving it a few minutes to boot only to find everything very slow, then doing a restart. Upon start up, my Mac returned to being its normal speedy self, but this Mighty Mouse issue occured.
The settings in preferences -> mouse are ''lowest scroll speed'' and "vertical and horizontal" scrolling
I have reset the SMC and PRAM. This did nothing.
Any suggestions???

Thanks for the suggestion, I didn't know of that preference item.
But changing this did not help, in fact it seems to coincide with the System Preferences>Mouse>Scrolling (change one, and the other changes too). And changing this scrolling setting anywhere from low to high doesn't seem to change my current scrolling speed. It is unregulated.
I should also mention that I have two bluetooth Mighty Mice and one corded Mighty Mouse. All of these have super-fast vertical scrolling and NO horizontal scrolling.
Also, when resetting the PRAM, it is an obvious restart. When resetting SMC, is there any visible/audible cues that the reset has occured? I just want to rule these two possible solutions out.

Audition CS5.5 mouse scrolling issue

Similar Messages

Maybe you are looking for