Audition CS5.5 suddenly stopped playing audio?

Audition has been running perfectly for the past month since I got it,
but all of a sudden, the audio stopped playing? The tracker is still moving and the mixer levels are still jumping around like they do when you play something back?
In the preferences menu, in the Audio Hardware section,
It's only showing 'ASIO4all v2' as a device and nothing else - normally there is at least 2 or 3.
I've done everything I could think of (Yes, including turning it off and on again)
What should I do?
I have to fix this quickly as I've got quite a bit of work to do and I'm stuck until it's done.
I'm also using headphones if that helps at all.
Thanks.

ASIO4ALL is just a wrapper for other devices on your system.  If you click the Settings button in the hardware preferences, it should open the ASIO4ALL control panel.  You'll want to make sure the correct audio device is listed and enabled within.  Sometimes, if a device is disconnected or the driver is updated, ASIO4ALL may not recognize it as the same device it was using before. 
Depending on what audio device you have, you might want to try choosing MME as your Audio Driver option and selecting the device directly and see if you have a similar problem.

Similar Messages

  • I have a HP Pavilion dv6 that has suddenly stopped playing any kind of audio. How do I fix this?

    I have a HP Pavilion dv6 that suddenly stopped playing any kind of sound.  That's with earphones plugged in or not.  The microphone indicator in sound setup indicates that it is listening to external sound, and when I play system sounds, the speaker icon in the volume mixer indicates that the hardware thinks it is playing sounds, but nothing is coming out of the laptop at all.  I thought if it were a speaker not working internally I could fix it with earphones or external speaker but that isn't working either.  
    Any ideas?

    Hi,
    Try the following.
    Open windows Control Panel, open Windows Update, select 'View update history' in the left hand pane and then select 'Installed updates' link in the following window.
    Locate update KB2962407, right click it and select Uninstall.  When done, restart the notebook, open windows Control Panel, open Windows Update and select 'Check for updates'.  You'll see the update you just uninstalled being offered again - right click and select 'Hide Update'.
    After this you may or may not need to delete and reload the Audio driver - if you do, the procedure for using recovery manager to reinstall Software and Drivers is detailed in the relevant document on the link below.
    Recovery Manager - Windows 8.
    Recovery Manager - Windows 7
    Regards,
    DP-K
    ****Click the White thumb to say thanks****
    ****Please mark Accept As Solution if it solves your problem****
    ****I don't work for HP****
    Microsoft MVP - Windows Experience

  • Shuffle 2 stopped playing audio podcasts

    Hi. I have a Shuffle 2nd generation that just stopped playing audio podcasts. I've been listening to music and OTR and CBC Radio podcasts, and all of a sudden it stopped playing the podcasts. Music plays fine, but if I just load it with podcasts, and try to play them, my little light just blinks (saying "you don't have anything loaded!"). It still plays the music, but skips over each podcast.
    The podcasts are good. I used to play the exact same ones a month or two ago - then it just stopped playing them. I can listen to the podcasts on Itunes, and can listen to them on my old Shuffle 1st generation.
    Help!

    ooh, I did a bit more research and found a solution for my problem.
    iPod shuffle won't play podcasts if its in shuffle mode.  You have to switch it to linear mode.
    I did that and now it plays just fine.  Hopefully that's all that was wrong with yours as well.
    I must have accidentally switched mine by accident and not realized it.

  • My Mac has suddenly stopped playing my DVDs including a DVD it played fine only 3 days ago. Does anyone have any idea what could be wrong and how I could fix it? Thank you.

    My Mac has suddenly stopped playing my DVDs including a DVD it played fine only 3 days ago. I insert the DVD and wait for the player to start automatically but after 10 minutes, nothing is happening and it sounds like the disk has stopped spinning. I've now tried with four different DVDs (all store bought and so perfectly normal disks). The Mac doesn't eject the disk or anything it just doesn't seem to respond to it being there at all.
    My main confusion is why this suddenly happened today when it was perfectly fine last week.
    Does anyone have any idea what could be wrong and how I could fix it? Thank you.
    Jinxe

    Welcome to the Apple Support Communities
    See "The drive accepts discs but they do not mount or are automatically ejected" > http://support.apple.com/kb/HT2801

  • TS3700 why does my ipod suddenly stop playing

    Why does my ipod suddenly stop playing?

    is your battery charged?  How many songs do you have on the playlist (if you are playing a  playlist when it stops)?   I know that when the earbud wires are accidentally disconnected from the ipod body, the music stops automatically.

  • My Mac suddenly stopped playing through my external speakers which are fine and working well with other devices.

    My Mac suddenly stopped playing through my external speakers which are fine and working well with other devices.

    Have a look in System Preferences -> Sound -> Output.
    Plug the speakers out. Do you now see "Internal Speaker" as the name from the Built-in device? If you replug your speakers, is it now changing to "Headphone?

  • Youtube suddenly stopped playing videos

    My iMac OSX 10.6.8 suddenly stopped playing youtube videos.
    I haven't installed any new software or changed anything that coincided with the loss.
    The youtube screen says blocked plug in.
    I read the existing discussions and:
      I opted out of the HTML5 pilot, restarted Safari (5.1.8).  Still won't play videos. 
    In the past, videos played on Quick Time Player so I'm reluctant to install Flash Player. 
    Any ideas??  

    LavenderLucy wrote:
    In the past, videos played on Quick Time Player so I'm reluctant to install Flash Player. 
    Any ideas??  
    You cannot watch YouTube w/o flashplayer.  You will need to install the latest version from Adobe's website.  Also, regarding QT install Perian (AVI and FLV support) 
    After doing the above installations, make sure you repair permissions and restart your computer. 

  • HT2045 itunes suddenly stopped playing on my windows 8 laptop, cannot seem to find a solution

    itunes has suddenly stopped playing songs in my windows 8 laptop.  I have tried uninstalling and re-installing with no effect.  Can't seem to find a solution in the itunes help either.  Any other suggestions?

    So I try to get this done for a little while! I download itunes but during installation i get a message concerning a .dll file.
    With that one, even though you're getting a different error message, try the procedure from the following user tip:
    "The administrator has set policies to prevent this installation" error messages when installing iTunes for Windows on Windows Vista and Windows 7 systems

  • Many of my older ITunes downloads play perfectly well on my IMac but constantly skip to the next song or suddenly stop playing on my IPhone. The problem is the same with both my old 4s and my new 5s. I have tried deleting and re-downloading to the phones.

    Many of my older ITunes downloads play perfectly well on my IMac but constantly skip to the next song or suddenly stop playing on my IPhone. The problem is the same with both my old 4s and my new 5s  phones. I have tried deleting and re-downloading my music library to the phones, but the result is always the same.

    I'm adding more information:
    in Finder, my iMovie folders are all visible and accessible.  When I click on a clip from iMovie Events folder, Quicktime opens and plays the clip.  ALL my video is not missing - it just isn't showing up in the Event Library!
    This happened all of a sudden, while I was working on iMovie project (on both computers).
    All my Projects are intact, and play when I open them. 

  • Why does fcpx suddenly stop reading audio files? ever since i upgraded to Yosemite. Than when I check it on my hard drive it doesn't work as well. Only this file. Am in a trouble of delivering now. Any help?

    why does fcpx suddenly stops reading audio files? ever since i upgraded to Yosemite. Than when I check it on my hard drive it doesn't work as well. Only this file. Am in a trouble of delivering now. Any help?

    Could be systems logs or some other system file growing.
    Use OmniDiskSweeper or DaisyDisk to map what's being used.
    Regards,
    Shawn

  • HT201401 Hi my 4s has all of a sudden stopped playing sound.

    Hi my 4s has all of a sudden stopped playing sound. I have a ringtone but no sound for music/movies etc. tried turning on and of and letting bat go flat then recharging. Sound came back for a while then went again. I noticed this started soon after I upgraded to 5.1.1 . Ive also looked at the error reports the phone generates for apple and there are a few memory low notes.  Any help would be appreciated.

    We have a WHOLE discussion about the issue over here:
    Re: IOS 5.1.1. update bug (Volume Control)
    So far Apple is not doing anything to fix the bug with 5.1.1 It's really annoying!

  • CAN ANYONE HELP ME??!!  i i have an ipod touch 4th gen and it has all of a sudden stopped playing music.

    i have an ipod touch 4th gen and it has all of a sudden stopped playing music. i click on the song and it goes onto it then all of a sudden goes onto the song then goes to the music menu without playing the song. please help

    - Reset the iPod. Nothing will be lost:
    Reset iPod touch:  Press and hold the On/Off Sleep/Wake button and the Home
    button at the same time for at least ten seconds, until the Apple logo appears.
    - Restore the iPod from backup
    - Restore the iPod to factory defaults/new iPod.

  • Logic stopped playing audio

    Hello everybody, this is a vital question.
    After the latest security update, logic stopped playing audio. After a short debug I discovered that core audio doesn't show any external interface anymore, so any other song is affected. I dont know if the security update is related... Anyways Logic is gone and my songs too!!!
    Audio-Midi configuration, as well as the interface related control panels, work as expected and audio is correctly played by the finder. All other software which makes use of core audio (e.g. Bias Peak) works.
    My interfaces are AVID M-Audio Fast Track Ultra and, for this testing purposes, M-Audio Audiosport Duo (legacy), all with the latest drivers.
    Obviously my Logic is officially bought from the App Store.
    MacPro (late 2007) 7GB RAM 2 x 2,66Ghz Dual Core Intel Xeon
    Mac OS X 10.7.5 (latest update)
    Logic Pro 9.1.8 (1700.67) 32 bit (latest update)
    AVID M-Audio Fast Track Ultra with 2.2.2 firmware (latest update)

    Hey icedj,
    I had that happen. I had to trash my Logic prefs, then restart Logic. It's a P.I.T.A. because you lose various settings (color settings, for instance), but it fixed the problem for me.
    Bamboof
    Vallejo, CA

  • My iPad 3 iOS 8.3 suddenly stopped playing sound on its speakers while on Spotify. Volume max. Side switch not on mute. Tried rebooting thrice. Sounds won't work on other apps. Works with earpods.

    My iPad 3 iOS 8.3 suddenly stopped playing sound on its speakers while I was listening on Spotify. Volume was maxxed out. Side switch not on mute. Tried rebooting thrice. Sounds won't work on other apps (Soundcloud, NPR, Clash of Clans). There are sounds when I attached my earpods. I tried the switch to mono solution on the other threads, didn't help either.
    My iPad is generally muted because of classes, but when I un-mute it it works fine. It just stopped after one song, and now I can't get it to work. Any thoughts? Thanks.

    Hi!
    I've the same issue after updating to iOS 8.3. on iPad 3.
    sound is working properly only with headphones attached.
    when I tap on AirPlay button it says "Docking connector" while it should "iPad"
    when i play with sound settings and try to change e.g. some alert sounds, sound is played and volume slider in control center magically appears.
    any other app can't play sound.
    is there any fix for that?
    Thanks

  • Music suddenly stop playing

    Jus buy myself an ipod shuffle.... It sudden stop playing over some time with a "special" sound come out from the earphone. It does not responsive unless i reset it. Then it need to be reset for 10s. What actually cause this problem? It does not happen on the same song. Sometimes can be happen after 10mins or 30mins.
    PS: the "special" sound is like song problem but doesn't seems like the song problem as i check on the same song after resetting my ipod.

    I've had the same problem happen to me 3 times. It happened to me this morning while I was running. I was using my new replacement that the apple store had swapped out for me. It's gotten to the point of being beyond frustrating. I'd like for it to hold up thru my half marathon.

Maybe you are looking for

  • Airplay won't work with Apple TV and iPad 2

    I have an iPad 2 running iOS 8.1 and an Apple TV 3 with the latest software and I can't use Airplay to send content to my Apple TV. I know there is no issue with the Apple TV since I can use Airplay to send content to my Apple TV using my iPhone 6, a

  • Smart Objects: How can I prevent resizing when replacing contents?

    There seem to be 2 kinds of smart objects: One kind where you can replace the contents, no matter what size it has and it will fit into the bounding box of the smart object which is already there. The other kind where this doesn't happen. Is there an

  • IDOC: Incorrect function module problem

    Hi, I am working on inbound IDOC processing. I created an extension for an IDOC. I created custom segment & included it in the extension that I created. The Message type was also custom. (I merely copied an existing standard Message Type for some oth

  • Error 19 when starting photomerge

    Hi I've encountered a problem when trying to use the Photomerge automate tool. The error message I receive is not really helpful in describing the problem. It says "error 19: bad argument: invalid resource format" and then (to me) random mumbo jumbo.

  • 70kbps download speed :(

    Since around 10pm last night I noticed my connection getting horribly slow. Wep pages took an average of around 15 seconds to open and I was experiencing latency of between 2.5K and 10K during online gaming. The router has been restarted but hasn't s