Audition CS6 Mac Won't Play Audio Interface Preference Issue

Hi Im having some problems with Audition CS6 mac. I have the full master collection and only encounter this issue with Audition.
On my Macbook pro
I use my internal speakers/audio or a vrm box audio interface, occasionally Ill use a fasttrack pro to record. My problem occurs after I use the audio interface. When I next open Audition set up for the built in speakers/audio and hit play, it says playing but nothing plays. 
When I open Audition after using a external interface going back to my built in macbook audio I get a pop warning that:
"Your systems audio hardware settings have changed. Would you like to go review Audition's audio hardware preferences?"
I click yes,  go to that everything is set for internal mac audio,
hit play, says playing bottom left, then  just sits there.
I noticed today when it did this, that it if I go into the Audio Channel Mapping Preference, it shows what ever audio interface I used last on the output/not working on it. I am unable to change theses settings.
I reboot after changing audio interfaces, etc.
I can delete my Audition preference files in my user folder and it functions again, but that also entails rescanning all plugins which takes some time.

I just found that removing MachineSpecificSettings.xml in the user/preferences/adobe/audition/5.0/  folder will get it to play again under the internal audio settings. And when I look at channel mapping it shows the internal audio.

Similar Messages

  • Repost: brand new mac won't play/recognise/mount audio-cd's

    No idea what's going on here. I posted a question which I will paste below. Someone posted some suggestions for me (Dave Sawyer if I remember the name correctly, thanks again!) which lead me to ask wheter I was or was not supposed to have a file named cd info.cidb in a certain folder.
    Now all of a sudden my thread is gone and I find the following mail in my inbox:
    NoName posted "Re: brand new mac won't play/recognise/mount audio-cd's" in "brand new mac won't play/recognise/mount audio-cd's" on Aug 1, 2008 4:21:01 PM.
    You wouldn't have that file unless you used iTunes to get CD metadata from Gracenote. I hate Gracenote, therefore I have never had that file on my system
    To view or respond to this message, visit <http://discussions.apple.com/thread.jspa?messageID=7775827#7775827>
    To view the full topic, visit: <http://discussions.apple.com/thread.jspa?threadID=1643589>
    To view the forum, visit: <http://discussions.apple.com/forum.jspa?forumID=782>
    We appreciate your participation in Apple Discussions. Thank you for being part of our community.
    Apple Discussions Team
    The origial question post was the following:
    Hi all!
    I am totally new to the macbussines (got one for a month now) and not using cd's much I never tried importing one untill today... and it simply won't. I think it's supposed to show the audio-cd on the desktop and give me an 'import cd' button in itunes whenever I insert an audioCD right?
    It won't do... it'll take it in, turn it a few times and slide it right out again.
    What I tried so far:
    * toying with itunes settings for importing (import cd & eject, show CD, ask to import cd etc)
    * toying with the cd&dvd preferences under system preferences
    * click the mount 'button' in disk utility as was suggested in all those threads regarding cd's not mounting first time (my cd's won't mount the second or 30th time either)
    * resetting the PRAM
    Nothing so far.
    It does recognise DVD's but no audio cd's whatsoever, originals, burned ones. You name it. As I don't use CD's a lot the newest CD dates from 2003, but that can't be it, can it?
    Any suggestions would be highly appreciated...
    o/
    Am I going para? Where did my post go? It's totally gone, not even under 'my posts' or anywhere...
    Still no solution either... suggestions still welcome therefor

    My guess is that someone didn't like that I said I didn't like Gracenote.
    Anyway, I Googled for your thread and luckily found it intact in the iTunes for Windows forum and posted a condensed reply there for you.

  • My mac won't play cds anymore

    My mac won't play cds anymore. I've burned 100s of cds on this. Is there any maintainence that I can do  ?  Such as cleaning .

    Thanks, Nathan. I understand about time constraints. I can wait.
    Microsoft Windows XP Home Edition Service Pack 2 (Build 2600)
    Sony Corporation PCV-RS710G(UC)
    iTunes 7.0.0.70
    CD Driver 2.0.6.0
    CD Driver DLL 2.0.6.0
    LowerFilters: AFS2K (3.1.21.0), PXHELP20 (2.0.0.0), Cdr4_xp (7.5.0.50),
    UpperFilters: GEARAspiWDM (2.0.6.0), Cdralw2k (7.5.0.50),
    Video Driver: NVIDIA GeForce FX 5200 \GeForce FX 5200
    IDE\DiskMaxtor6Y200P0_________________________YAR41BW0, Bus Type ATA, Bus Address [0,0]
    USBSTOR\DiskSony___UMH-U_HS-CF____3.34, Bus Type USB
    USBSTOR\DiskSony___UMH-U_HS-MS____3.34, Bus Type USB
    USBSTOR\DiskSony___UMH-U_HS-SD/MMC3.34, Bus Type USB
    USBSTOR\DiskSony___UMH-U_HS-XD____3.34, Bus Type USB
    IDE\CdRomPIONEERDVD-RW__DVR-108_________________1.00___, Bus Type ATA, Bus Address [0,0]
    IDE\CdRomSAMSUNGDVD-ROM_SD-616E_________________F500___, Bus Type ATA, Bus Address [1,0]
    If you have multiple drives on the same IDE or SCSI bus, these drives may interfere with each other.
    Some computers need an update to the ATA or IDE bus driver, or Intel chipset. If iTunes has problems recognizing CDs or hanging or crashing while importing or burning CDs, check the support site for the manufacturer of your computer or motherboard.
    Current user is an administrator.
    D: PIONEER DVD-RW DVR-108, Rev 1.00
    Media in drive is blank.
    Get drive speed succeeded.
    The drive CDR speeds are: 4 10 16 24 32.
    The drive CDRW speeds are: 4.
    The drive DVDR speeds are: 4.
    The drive DVDRW speeds are: 4.
    E: SAMSUNG DVD-ROM SD-616E, Rev F500
    Drive is empty.
    The last failed audio CD burn had error code -128(0xffffff80). It happened on drive D: PIONEER DVD-RW DVR-108 on CDR media at speed 0X.
      Windows XP  

  • Adobe Bridge CS6 (Mac) won't open .arw files from my Sony RX100. How do I get and install the right version of Camera Raw?

    Adobe Bridge CS6 (Mac) won't open .arw files from my Sony RX100. I was told to update Camera Raw to at least 7.2. I tried to download this but got a DNG Converter instead. Where is Camera Raw? (it does not show up in a search of my hard drive. There is a folder of camera profiles but no extension or plug-in with this name). How do I find out what version I have already? How do I get the correct version?  . . . OR . . . is it the case that Bridge will never open Sony raw files directly and I will have to do a separate conversion process every time I want to use a raw file??. Can someone explain this?
    Thanks.

    A Good samaritan answered this for me on another forum
    How to update Camera Raw

  • HD version of TV show and my mac won't play

    I accidently purchased the HD version of TV show and my mac won't play them so I paused the download.  Anyway to cancel and download the SD instead?

    iTunes: Frequently asked questions about viewing and syncing videos - http://support.apple.com/kb/HT2729 - including file formats supported by iTunes and on mobile devices, DVDs, etc.
    iTunes: Purchasing and viewing HD videos - http://support.apple.com/kb/HT3209 - "When you purchase an HD video on a supported device or computer, only HD video will be downloaded. To download the SD version, you need to download the video again from your Purchased page."  Other details about which formats are downloaded and when.

  • How to solve Audition CS6 error "The amount of audio to burn will not fit on the CD........."?

    I have a brand new PC that is MORE than adequate. I have once succeeded in burning a CD after learning all about time tracks and merging them. (made a few with only ONE track)
    Two things:
    1) I find that I must add a CD marker at the end of the WAV because Audition CS6 erases whatever is the last CD marker I've made. Very frustrating but now I know I have to do this but I have no idea WHY!!
    2) Right now I have a WAV that is just over 1 hour and 3 minutes with a total of 637.74MB of info. When I try to export/burn a CD, I get an error message stating "The amount of audio to burn will not fit.......".  I am using TDK 700MB blanks with a Pioneer Blu-ray burner.
    Obviously it will fit.
    What am I doing wrong, all of a sudden?

    Hey ryclark,
    Thanks for responding. Something else is going on here.....
    Here's what I re-replied to our friend...
    Thanks for the response.
    When I built this computer last Nov/Dec, it was built with the second 
    fastest Intel 7i, quad-core chipset on an 64-bit ASUS motherboard. It's  running
    Win 7 Pro. It has a 500GB SSD "C" drive with another 14 TB of true hard 
    drive space. It is set up with 64 bit. I had been using Audition CS3 for  many
    years and even go back to it's origin: Cool Edit and Cool Edit Pro. My 
    learning curve was minimal, sans the CD burning, which I used other software
    for  which is now antiquated, so I need Audition for this. Between this and 
    IZotope 3 I've repaired and improved many a recording. All-in-all extremely 
    useful software.
    As for the idea "to burn it anyway", well the error message comes up and 
    that's it - if I "X" out of that message and try to burn again the message
    comes  back  - so Audition will not let me. It is convinced that this file is 
    longer than it really is, but only when I add track  marks to it!
    There are only 11 tracks.
    I was able to burn a CD of this same file but without all the track marks, 
    so the same exact file length/size will burn, only as the one track.
    I've also succeeded in burning other WAV's , both greater and smaller, with
    and without multiple track marks, without issue. Of course all with less 
    than the CD's max. capacity.
    This problem seems to be with this one file. I've even  re-made/re-recorded
    the file from scratch with no change. There's something else  going on here
    that I can't put my finger on. (I am "recording" LP's and making  personal
    CDs of them)
    Also, only from time to time, I have another error after burning a CD that 
    states it could not verify the CD. For this I assume it is the blank rather
    than AA? The first might burn without issue and with the second burn I 
    get the error. It is near the end of a stack of blanks, so.....
    As for the need to "mark the end" of the file makes a lot of sense but of 
    all the other CD track-marking software I've used, none needed one to do
    this,  but this IS Adobe after all.
    You'd think there might be a smidge of intuitiveness with Adobe, but maybe 
    not.
    - Mark
    In a message dated 8/2/2014 8:11:52 A.M. Eastern Daylight Time, 
    [email protected] writes:
    How  to solve Audition CS6 error "The amount of audio to burn will not fit
    on  the CD........."?
    created by ryclark (https://forums.adobe.com/people/ryclark)  in 
    Audition CS5.5, CS6 & CC - View the full  discussion
    (https://forums.adobe.com/message/6605916#6605916)

  • Making a disc with iDVD on my Mac won't play on any other player why?

    Making a disc with iDVD on my Mac won't play on any other player why?

    How about some details on how you made the disc.  What sort of media did the project contain?  What brand and type of media did you use?  What burn speed did you use?
    Follow this workflow to help assure the best qualty video DVD:
    Once you have the project as you want it save it as a disk image via the File ➙ Save as Disk Image  menu option. This will separate the encoding process from the burn process. 
    To check the encoding mount the disk image, launch DVD Player and play it.  If it plays OK with DVD Player the encoding is good.
    Then burn to disk with Disk Utility or Toast at the slowest speed available (2x-4x) to assure the best burn quality.  Always use top quality media:  Verbatim, Maxell or Taiyo Yuden DVD-R are the most recommended in these forums.
    OT

  • Flash won't play audio. Please help!

    To anyone who can help,
    Flash won't play audio in Firefox, Chrome, Safari etc. Downloaded audio plays just fine but I can't stream any flash audio content. Does anybody have any solutions? Any help would be appreciated.
    Regards,
    Ben

    I'm experiencing the same problem on Snow Leopard 10.6.8.  If I go to YouTube, I don't get audio.  Other websites are fine (I'm not seeing a pattern on exactly which sites).  What I had to do was uninstall Adobe Flash (I used the Adobe Uninstall utility).  Now I have audio on YouTube, but now I'm getting a lot of 'missing plugin' messages from other websites.  I've opened
    To asiatic43, you can get the latest Adobe Flash at
    http://get.adobe.com/flashplayer/

  • IOS 6.0.1 Safari won't play audio files. Error: "Cannot play audio file."

    I recently updated my iPad to iOS 6.0.1, now Safari won't play audio files in any format. Error: "Cannot play audio file." Previously, it worked fine. I tried downloading and using GoogleChrome and Opera Mini, and these also won't play audio. What's up??

    Solved the problem. It seems that once iOS 6.0.1 installed, it caused all of my browsers to mishandle audio files. When I reset the iPad, that cleared up the problem.
    Before upgrading to iOS 6, my browsers would "autoplay" the sound files. After iOS 6, "autoplay" is disabled so you have to manually click play to play them.
    Nonetheless, everything is working fine again except for "autoplay," which I can live with.

  • Audition CS6 Mac install help

    during install of Audition cs6 mac, I get "No components to customize." Help?

    THANK YOU Jeff for attempting to help.
    I emailed an experienced apple friend,he told me my OS needed updating.
    Current Version: 10.6. He said Audition needed 10.6.8.
    Everytime I get "Software Update Notice", It prompts me to install "Mac OS X Update Combined C.10.6.8".  I click install and the "Install" button turns from <blue> to <gray>, signifying my click. Less than a second later, the button returns to <blue> indicating No Install.
      I hope you can address this or I'll go to the Apple Store in Okc to have them fix these problems.
    Again, THANK YOU JEFF!  I do all that is ask of me in the software and almost always arrive at an 'unsolvable intersection'.  If the prompts told me what to do differently, I could make those corrections. But, not installing after pressing "install" and not giving me 'correctable instructions', how am I to address the problem?  I appreciate you very much! - Al 580.226.6443  (if anyone requests 'remote access' to address this issue, I will grant to them.  Al

  • My mac won't play dvd's and the region won't reset. This has never happened before and I've never had to change the region

    my mac won't play dvd's and the region won't allow me to set it. nVer had to touch this before. Has come out of the blue

    Perhaps the lens is dirty.  Try cleaning it with a DVD lens cleaning disk, shoot some compressed air into the slot or use a fine microfiber cloth (eyeglasses cleaning cloth) wrapped around a business card and insert it gently into the slot.
    Ciao.

  • Running Audition CS6 on OS X ver 10.10.2 Installs but won't play audio

    Running Audition CS6 on OS X ver 10.10.2. It installs just fine, and when I hit the space bar after installing, says it's playing on the bottom left. But it doesn't Just sits there and does nothing. Is there a known issue with 10.10.2?

    ronmoody wrote:
    Running Audition CS6 on OS X ver 10.10.2. It installs just fine, and when I hit the space bar after installing, says it's playing on the bottom left. But it doesn't Just sits there and does nothing. Is there a known issue with 10.10.2?
    The only known issue with Audition's transport not wanting to move on a correctly installed system is when it gets itself disconnected from a sound device. Initially you should go to Edit>Preferences>Audio Hardware and make sure that your (well I'm guessing slightly here as it's a Mac and I don't have one) aggregated sound device is the one selected.

  • Audition CS5.5 won't play

    MacBook Pro 17"
    2.2GHz Intel Core i7
    8Gb RAM
    Audition was working nicely.  Now over the past 2 weeks, it won't play anything.  I've tried MP3 files, WAVs, audio exported from Premiere....nothing is working.
    Help!!!

    Why is it silly that the record and playback sample rate have to match?  If you think about it, when you're recording, the sound you're listening to is looped through your sound interface.  If the rates don't match, it'll stop working because from your description, you're probably using something like a simple Realtek which can only do one thing at a time.
    Really, the inbuilt sound cards on most computers are NOT designed for any serious recording--they're far more suitable just for watching Youtube or making Skype calls.  However, you CAN use it if your really must--but it'll get confused trying to handle two sample rates at once.
    It's not anything silly in Audition--it's a limitation of your sound card and operating system.

  • ITunes on Mac won't play transferred songs purchased by same account on PC

    I have recently transferred my iTunes library from a PC to a Mac (using my iPod as a hard drive). However, when I open up iTunes on my Mac, I am told that certain songs (all of the ones purchsed from the Music Store from the PC) are not authorized to be played on the Mac. I can only play songs I downloaded myself from cds. My purchased music still appears int he library, but I am not "authorized" to play it. Also, this is only the second computer I have used my iTunes on. How can I get this Mac authorized to play the songs I purchased?

    Search the iTunes help files on the Apple support pages as I am sure there is lots of info about authorzing other computers.
    But off the top of my head, one work around to this issue is to simply burn an audio CD on your PC with a playlist of your purchased songs or how ever many CDs you need to do it (CD-RW discs might be a good tool for this). You can then put those CDs into your Mac and import the tunes and now the "authorization" info/protection will have been stripped from them and you won't have that issue with them anymore.
    Patrick

  • ITunes 11.5.1 won't play through interface

    I have a MBP. I upgraded to Mavericks after a crash. I've been selectively restoring items from the backup drive. I installed the latest version of apps, including iTunes, MainStage 3, and Guitar Band, and reinstalled Logic Pro 9, all from the App store. I have an M-audio Firewire 410 hooked up to the computer to play through studio speakers. Everything always worked fine.
    Now, when I play iTunes through the built-in speakers, it works fine. But when I change the output in system prefs to Firewire 410, iTunes won't play any songs. The play icon turns into a pause icon, but the song isn't playing. It just freezes at the beginning of the song.
    I have reinstalled the Firewire 410 drivers, reinstalled iTunes, and repaired permissions a couple of times. I'm not sure what else to try.

    Hello LBV123,
    The next step would be to report the issue to the folks in the iTunes Store, as detailed in the article below.
    How to report an issue with your iTunes Store, App Store, Mac App Store, or iBooks Store purchase
    http://support.apple.com/kb/HT1933
    Cheers,
    Allen

Maybe you are looking for