Audition has encountered an error. [\premiere2.0\Backend\Src\Time\Time.cpp-104]

When playing audio in the edit window when using the Spectral Frequency Display, Audition 3 keeps hanging and when it does so it causes the display to get screwd up. Not just the Audition window, but any others including the icons, task bar etc. Some times it also displays the following error message:
Audition Error
Audition has encountered an error.
[\premiere2.0\Backend\Src\Time\Time.cpp-104]
Once this happens the computer has to be re-booted, programs don't run, or are very slow.
To give you an idea of what the screen looks like, I have managed to take a screenshot: http://www.mikeoates.org/misc/audition_screenshot.jpg
This is driving me mad, I can't get any work done, it happens many times an hour. There is nothing that has been changed that I am aware of. To try and sort it out I have got the latest graphics drivers, added the 3.01 patch. I am using Windows XP SP3.
Thank you,
Mike

Dean & Runaway,
Thank you both for your help, based on what you have posted including the links to other topics, I think I am making some progress.
Firstly based on the assumption that something has changed, I do recall that one of the times Audition hung, when I rebooted and run it again, the colours had changed in the Spectrum display. So I went into the Spectral Controls window and made some changes to get the colours back, but I also changed the resolution to 1024 from 512. Now I think this may have been about the time that the frequency of these problems increased. So with that in mind I have been back into those settings and reset them back to default (a good place to start). This seemed to help a great deal in that I could play and fast scroll through over one hours audio before a hang.
So I also rolled back the video drivers to those I have been using for years, in fact these are dated 2004. This did not seem to improve things, so I then changed the screen resolution for my monitor from 1900x1200 to 1680x1050. Now I have just gone through 4 hours of audio with NO HANG. Things are looking good, so I will leave things as they are and report back perhaps in a few days.
Just going back a few months, the hangs were very intermittent and may happen once a week or so, this seemed to increase in the past few weeks, possibly after the settings changes to the Spectral Controls. Why it started to happen in the first place though, I dont think I will ever get to the bottom of.
I will keep you posted.
Mike

Similar Messages

Audition has encountered an error.

I got this error message.
how can i solve this?
Audition has encountered an error.
[\premiere2.0\Backend\Src\Core\Preferences.cpp-253]
and this message box also popup.
Shutting Down...
To continue working where you left off, please restart Audition.
OS : Windows 7 Enterprise K (64bit)
Program : adobe Audition 3.0

You should ask in Audition CS5.5, CS6 & CC

Strange error when creating image [\dev\stingray\Backend\Src\Sequence\Sequence.cpp-1395]

Version: Encore 2.0.0.48678
Problem: when either building an image or a folder the build halts after a few seconds with this error message. "Encore has encountered an error [\dev\stingray\Backend\Src\Sequence\Sequence.cpp-1395]" then the general error pops up.
project size is 800mb, there are no errors, all files are encoded, preview works fine. tried disbaling motion animated buttons. No motion menus
XP SP2, recent default install of production suite. Tried it with network disabled, many reboots, renames, drive changes.
PC is dell SC430 server 1gb ram, Intel 2.8D, Drives have plenty of space etc etc
Google reveals a few similar problems but no resolutions, any help much appreciated
Maurice

Me too Charlie - did you ever get a fix?

PProHeadless has encountered an error

Hello editors,
I've been trying to Encode some clips for DVD and AME faile. I receive an error message as follows: "PProHeadless has encountered an error" ....src/win/winfile.cpp-759" . Multiple attempts to encode have failed. I've flushed temp files, re-booted, Rendered the files (successfully) on the Timeline, clied "use previews" in AME, but the message continues to appear. I'm using CS5.03, and have opened both applications as Administrator
Any thoughts? .
Thanks,
John G

To answer my own question.... it appears that one of the clips was corrupt, though it plays in various players. I have no idea what the error message means, but once I removed the first clip in the series and slid the rest of the timeline, everything rendered properly.
I hope this helps someone.
Good Editing,
John G

Audition has encountered a fatal error and needs to shutdown

All of a sudden, Audition has been frequently giving me this error "audition has encountered a fatal error and needs to shutdown" and shutting down when I select an area using the Paint Brush selection Tool in the Spectral Display. I have made lots of use of this tool in the recent past, editing out noise in recordings. But, this error now makes that tool almost useless.
How can I fix whatever is wrong?
1) MacBookPro with Lion 10.7.4
2) Audition CS6, v5.0 build 708
3) Editing wave files using the Paintbrush tool to select small areas to reduce the level.
4) Does NOT seem file dependent, since this problem has occurred on brand new wave files and previously edited wave files. I do not know if it is restricted to wave files. That is just all record - wave 24/96.
5) The problem generally occurs when I simply select an area. I think sometimes it doesn't surface, until I try to adjust the level.
6) I have used this tool a lot, prior to this problem surfacing. I' had no troubles. then, on a file I hade been making lots of little edit to, to clean up the noise, it suddenly started giving me this error. Since then, any file I have tried to use the Paint Brush tool give me this error. Forces me to save VERY frequently.
Any ideas?
Mike

Hi Mike,
First, let me ask that the next time this crash occurs, please locate and send the corresponding OS X Crash log. To locate this file, do the following:
Open Finder
From the menu bar, choose Go > Go To Folder...
In the "Go to the Folder" box that pops up, type: ~/Library/Logs/Diagnostic Reports/ and click Go
Locate the Adobe Auudition CS6_2012... file that is most recently dated and send it as an attachment to [email protected]
I would then suggest two steps to resolve this:
Update Audition:
Click Help > Updates in the menu bar and update Audition CS6 to v5.0.2
If you still experience a crash after updating Audition, let's temporarily reset the preference files for Audition and see if that makes a difference.
Open Finder
From the menu bar, choose Go > Go To Folder...
In the "Go to the Folder" box that pops up, type ~/Library/Preferences/Adobe/Audition/ and click Go
Rename the "5.0" folder to something else, such as "5.0_OLD"
Audition will rebuild these preference files to its defaults on the next launch. See if this crash is still a problem.
Thanks!

Adobe Audition has encountered a problem and needs to close.

I have been using Audition 2.0 on this computer for quite some time and suddenly now when I open it, I get the cryptic error dialogue:
"Adobe Audition has encountered a problem and needs to close. We are sorry for the inconvenience. If you were in the middle of something, the information you were working on might be lost. For more information about this error, click here."
When I click for more information, it's something useless like:
AppName: audition.exe AppVer: 2.0.5306.2 ModName: unknown
ModVer: 0.0.0.0 Offset: 65726168
Nothing on my computer has changed. There are no viruses. I have not added any new audio plug-ins. I am completely up to date with all critical Windows XP SP3 updates and none have been downloaded and installed recently anyway.
I searched the knowledgebase and found a document that suggesting many things to try. I tried them all, including running the Windows hard disk "check disk" tool with options to fix file system errors and recover bad sectors. I also defragmented the hard drive. Lastly, I completely uninstalled Audition, then manually deleted any remaining files, including registry entries as suggested in another knowledgebase article.
I then re-installed Audition 2.0 and it did exactly the same thing! This it maddening. Now it gets even more interesting. I discovered that if I start up the
Adobe ExtendScript Toolkit that Adobe Audition installed also, then try to launch Audition from the toolkit, IT STARTS CORRECTLY! I can then close the toolkit and use it like normal. Weird work-around.
What the heck could possibly be going on? Anyone have any ideas? I've attached the error log file that is generated by the error but I doubt it will be of much help.
Thanks!
Steve in Chicago

stevefoobar2: I may have found a solution for you.
I had the same thing happen to me today. I was using Audition 2 this morning without any problems. But this afternoon, it started giving me the exact same error with no apparent reason. Nothing on my system had changed.
So I uninstalled it and installed Audition 3 in its place. Audition 3 continued to have the same problem that Audition 2 had, so we can assume that this is not something that was changed between versions.
But my attention was brought to the fact that you and I are both running Windows XP SP3 fully up-to-date. So I thought I'd try seeing it from the angle of a problem with Windows instead of Audition, and see if I didn't get a better result -
First, I logged on to Windows as Administrator. This may or may not be required, but you'll probably want to do it just in case (you'll see what I mean later). At this point, Audition still crashed the same way when I opened it, so I moved on to my next troubleshooting strategy -
Instead of opening Audition directly, I right-clicked the Audition icon and selected "Run as..." This may seem odd since I was already logged in as Administrator, but it proved to be the solution in my case.
In the "Run As" diolog, there are two main options: run as current user, or run as another user.
Since I was already logged in as Administrator, I could safely select the first option (run as current user). But here's the catch: selecting the first option allowed me to UNcheck the box underneath that says "Protect my computer and data from unauthorized program activity" (see the attached picture)
Audition opened without any problems when I did this.
This makes me think that one of the Windows security features suddenly decided to block something that Audition was trying to do, crashing the program in the process. By turning off this security feature, the problem was solved. And I only had to do it once. Every time afterwards, Audition has opened without any problems when I simply open it from my desktop. Perhaps Windows now remembers not to block Audition in the future.
However, I have not restarted my computer yet, or logged off as Administrator. You may need to tweak this solution if you plan to do either of these things. You may end up having to "Run as" Audition every time you restart your computer or log off. You may even need to select the SECOND option, and run the program as Administrator with the appropriate password.
Anyway, this was the only post I could find on Adobe.com concerning this problem, so I thought I'd post my solution in case it helped someone else.

Premiere Pro has encountered an error. CS6

Dear Adobe Community
I would be grateful for some help as Premiere Pro has begun crashing on me.
I am using CS6 - on two different Mac computers that both encounter the same problem. I am making a film 1920 x 1080 made up of almost 60 smaller films of 180 x 180 pixels with a color matte underneath them. Everything had been going fine and I was able to export three different versions of the film. Now unfortunately it no longer works!
Using the same process, that I used before that worked successfully, I select all the elements of the timeline and try and nest them. At this point I get the following error message:
Premiere Pro has encountered an error.
. [/Volumes/BuildDisk/builds/tightykilt/shared/adobe/MediaCore/Backend/Make/Mac/../../Src/S equence/LinkContainer.cpp-245] Continue
On pressing Continue - it "quit unexpectedly".
I've tried using a different Mac and have the same problem.
I tried slim lining the project to just the assets that I'm using, saving and rendering and saving and it still keeps on crashing like this.
I would be grateful for any help or advice.
Thank you very much!

Which operating system?
Yosemite sometimes has problems, often related to "default" permissions needing to be changed
-one person's solution https://forums.adobe.com/thread/1689788
-and a Java update https://forums.adobe.com/thread/1507936
-update may break things https://forums.adobe.com/thread/1772260

CAHeadless has encountered an error.

[/Adobe/premiere/elements/Release/12/ALL_LANG_12.1/MediaCore/Backend/Make/Mac/../../Src/Se quence/Sequence.cpp-2233]
this is the problem I have

Roy,
The timing on the message appearing puts a new complexion on the matter of the
CAHeadless has encountered an error
[/Adobe/premiere/elements/Release/12/ALL_LANG_12.1/MediaCore/Backend/Make/Mac/../../Src/Se quence/Sequence.cpp-2233
1. Did you install Premiere Elements 12 Mac to the default location as per the installation?
2. Was this an installation from installation files or from installation disc?
I am thinking now in terms of uninstall, ccleaner run through to get rid of any leftovers from incomplete installs and/or reinstalls.
https://www.piriform.com/ccleaner/download?mac
and then a reinstall with antivirus and firewall(s) disabled.
But, before you do that, try the deletion of the Adobe Premiere Elements Prefs file first.
We will be watching for your results and then we can decide what next based on your results.
Thank you.
ATR

CAHeadless has encountered an error - Sequence.cpp-2233

Hi Community,
I have installed Adobe Premiere Elements 12 and Adobe Photoshop Elements 12 on my PC....Since a few days I'm getting after each system restart the attached Error Message...I have already tried to re-install the software package but nothing was sucessfull..
Can someone support me in fixing that issue?

Roy,
The timing on the message appearing puts a new complexion on the matter of the
CAHeadless has encountered an error
[/Adobe/premiere/elements/Release/12/ALL_LANG_12.1/MediaCore/Backend/Make/Mac/../../Src/Se quence/Sequence.cpp-2233
1. Did you install Premiere Elements 12 Mac to the default location as per the installation?
2. Was this an installation from installation files or from installation disc?
I am thinking now in terms of uninstall, ccleaner run through to get rid of any leftovers from incomplete installs and/or reinstalls.
https://www.piriform.com/ccleaner/download?mac
and then a reinstall with antivirus and firewall(s) disabled.
But, before you do that, try the deletion of the Adobe Premiere Elements Prefs file first.
We will be watching for your results and then we can decide what next based on your results.
Thank you.
ATR

N2H2 Filtering has encountered an error.

I have some javascript on a page, doing an auto refresh of data.
All of a sudden on a fresh, I got this error: N2H2 Filtering has encountered an error.
And something about contacting my network admin.
There are several select lists on the page that can be used to filter the report data.
All lists were set to 'Select' - ie, show all items, which has a value of MY_NULL on the backend, since I can't seem to properly get this to work otherwise. ( I handle the MY_NULL in the query when returning data)
I just recently (yesterday) upgraded to 2.2 and have never seen this error before.
What does this mean?

Becky,
N2H2 appears to be content filtering software/hardware (from a quick 'Google'), these content filtering solutions (CFS) tend to be situated on your network so that they work 'transparently', i.e. all of your web traffic (and other traffic such as email etc) passes through the CFS and it monitors, evaluates and ultimately allows or denies your traffic.
My 'guess' would be that when you experienced the problem, the content filtering system experienced a problem that didn't really have anything to do with your Apex application (since you have been unable to reproduce it). It could have been something simple like the CFS couldn't connect to it's internal database, or it ran out of client connections, or something else entirely.
I guess the 'obvious' thing to do would be to let your CFS administrator know so they could look into their logfiles (for the CFS) to see if they can find the source of the problem. Although it looks unlikely to be anything specifically to do with your application in my view.

Increase the DB size in Azure gives the Error " Msg 40197, Level 16, State 1, Line 1 The service has encountered an error processing your request. Please try again. Error code 40671."

Increase the DB size in Azure gives the following error
Msg 40197, Level 16, State 1, Line 1 The service has encountered an error processing your request. Please try again. Error code 40671.
i have used following ALTER query,
ALTER DATABASE database_name MODIFY (EDITION='Business', MAXSIZE=10GB);
Regards
Vel

Hi Taiye,
According to your description, in theory, we can modify the size of database, and the T-SQL statement in your post is right. So we need to verify if there is no problem with network when you execute the modification statement, in addition, you must be connected
to the master database when executing the ALTER DATABASE statement. As the error message, I recommend you login again and connect to the master database then run the statement again.
For more information, see: ALTER DATABASE (Windows Azure SQL Database)
If the error is still exist, the Microsoft support engineer will help to solve the problem from backend. Sometime delay might be expected. Your patience is greatly appreciated.
Thanks,
Sofiya Li
If you have any feedback on our support, please click here.
Sofiya Li
TechNet Community Support

Adobe media encoder cc has encountered an error

can anyone help me about some problems with adobe media encoder cc ??
adobe media encoder cc has encountered an error
command.cpp-3302
THIS IS NEW CRASH WHEN I TRY TO EXPORT MPEG2 VIDEO

FAQ: What information should I provide when asking a question on this forum?

Adobe Media Encoder (CS5) has encountered an error (WinFile.cpp-759)

I have a 714 MB Xvid file that I want to split into smaller pieces. I have gone successfully through a similar process earlier with a larger Xvid file using the same version of Adobe Media Encoder (CS5). It appears that no matter which output video format I choose, the process crashes with the following error message shown in a new pop-up dialog:
"Adobe Media Encoder has encountered an error. [..\..\Src\Win\WinFile.cpp-759].
(Even the source program file line number 759 in the above error message is always the same, regardless of my chosen output file format.)
The only option available from this point onwards is the "Continue" button. When I click Continue the program terminates with the Windows program crash message "Adobe Media Encoder CS5 has stopped working. A problem caused the program to stop working correctly. Windows will close the program and notify you if a solution is available. <Debug> / <Close program>"
My search for other similar problem reports revealed that some user(s) has/have experienced a very similar problem in CS4, but the source line number was slightly different in CS4. Both problems are probably caused by the same error in Adobe's software. The small difference in source line numbers is probably due to some (minor) and probably unrelated changes to this C++ source module (WinFile.cpp).
It might of course be the case that this particular input video file has some rare encoding or other embedded problem. However, the fact that I can view the video without problems using Windows Media Player does not support this theory.
Apart from this message board I could not find any other avenue to report this bug to Adobe (without paying for support - which I am obviously not going to do as this is clearly a programming bug in the software). Hopefully some Adobe developer responsible for Media Encoder maintenance will read this forum from time to time and would subsequently inspect the source module for any obvious defects. I could supply the source video file with which this problem can be reproduced at will.
Regards
Jouni Juntunen

CS4 Adobe Media Encoder & FMLE are two different softwares - you can post your query here:http://forums.adobe.com/community/ame

"iTunes has encountered an error and needs to close" -Gapless Playback

I've had this problem for a while now and I'm just plain sick of it!
Every time I start up iTunes it does the "Determining Gapless Playback" thing, but when it gets to certain songs it freezes up and I get an error message that says:
"iTunes has encountered an error and needs to close"
This happenes to a lot of songs (a few dozen)and the only way I can actually access my library is by hitting the 'x'next to "Determining Gapless Playback" before it gets to the songs. However, now I can't even do that because it gets to the song immediately.
I need to know if I can disable the gapless playback or somehow debug this (I have reinstalled iTunes, Quicktime works, I have reloaded my library, done a system restore,and changed users/startup programs... nothing works)
PLEASE help!
I run XP if that helps.

Kar,
Check out the steps Roy B posted in this thread. They are long and a bit convoluted, but they seem to have done the trick for many others having this problem.

"iTunes has encountered an error and needs to close" - can't open iTunes

Hi guys,
I'm a huge Apple fan so I obviously decided to upgrade to Apple 7.0.1 the day it came out... installed it. Opened it up, but within just a few seconds i got a Windows message saying
"iTunes has encountered an error and needs to close"
I reinstalled it and still have the same problem.
First few days I could atleast keep iTunes open for a few minutes before the message, but now its down to just a few seconds.
I run Windows XP if that helps any.
Please help me fix this problem or tell me how I can put iTunes 6 back on my computer --- I need my music!
Thanks

After downloading and installing 7.0.1 my iTunes would not open either. Even worse is you can't go back to v6 if you had v7 running--the database is updated.
Luckily I was able to get my iTunes to open again by doing the following:
Click Start/Run
Type in "%userprofile%\application data\apple computer"
Right click on the iTunes folder and rename it to iTunes.bak.
Close the window.
Click Start/Run again.
Type in "%userprofile%\local settings\application data\apple computer"
Right click on the iTunes folder and rename it to iTunes.bak.
Close the window.
Try opening your iTunes again. It may re-ask some general setup questions, but mine opened without the error, and it still had all my music. However, I did have to re-authorize my computer.
I used to never be leary about updating iTunes... guess Apple's software ain't no peach, either.
Hope this helps someone.
Windows XP Pro

Audition has encountered an error. [\premiere2.0\Backend\Src\Time\Time.cpp-104]

Similar Messages

Maybe you are looking for