Audition under XP x64 or Vista Business x64?

Anybody running this under x64 OS of either Server, XP, or Vista?
I am currently running Audition 2.0 under XP x64 just fine other then the lack of DVD Audio plug in, but was wondering if it will perform the same for v3.0. I realize the specs say it is for 32bit (x86) only but then it said that for 2.0 as well.

Durin,
I'm sure there are others who will be encouraged by your update to me in the Vista 64-bit question. Very helpful.
You write that Microsoft is taking this seriously and I can attest to that. I was very impressed with the five phone conversations with (both to and FROM) them on this issue. They are taking it very seriously. One conversation was two full hours! The next one moved the matter to a "higher level" of tech service called their Research Division.
Interestingly to them, I was told, was that by way of one of the Adobe user forum threads I referred them to, the one from "Roy" at Adobe, I was able to "help" them on the problem. Your reply is no less impressive.
As to the 64-bit PC on which I discovered the problem, I took it back to the store and downgraded to a 32-bit Vista PC. Based on the strong feedback from both Adobe and Microsoft, I will return the 32-bit PC and re-buy the 64-bit PC. (And, sparked by one of the thread's contributors, while I wait I can sure keep business going on my old XP).
That is fine for me, except for now I can't help you on your request for more information on how reliable the "push clock" suggestion is. For you and all reading this, in all honesty I probably did not give "Roy's" Push-The-Clock-Ahead remedy a fair chance. As you can imagine, if Microsoft was concerned enough to spend AT LEAST five hours on the phone with me over three days, I was frustrated enough to give the "clock" thing a true trial.
Thanks again for the good feedback. As "Ozpeter" said in this string, it is very good for you to reply and thanks to Adobe to be doing so in this venue.
Still loyal, waiting, and thanks much,
-Rich Petersen

Similar Messages

Vista Business 64 on iMac - drivers wont install

I installed Vista Business 64 bit on my 2.4 GHz iMac. The install went fine until I got to the initial boot of Vista. When I inserted the Mac disk to install the drivers, a little dialogue box popped up and said that Vista x64 was not supported on my computer. Oh really? The operating system runs just fine, but it isn't any good without the Apple drivers for networking, etc... Does anyone know of a workaround for this? Why does Apple get to dictate which version of Windows I run on the computer that I bought and paid for? If they support 32 bit Windows, what is the difference if the support 64 bit Windows? Too much competition, I guess.

Unfortunately, the iMacs are not officially supported by Apple for use with 64-bit versions of Windows. They enforce this lack of support with their Boot Camp drivers installer. I won't pretend to understand why the MacBook Pro and MacPro models are the only officially supported models for 64-bit Windows...but, that's the way Apple wants it for now.
I've put Vista 64-bit on 24" iMacs before, and, it just takes some creative driver installation. I didn't chase down trying to get everything functional (e.g. the Boot Camp Control Panel).
For the wired ethernet: Marvell Yukon Gigabit Ethernet Drivers (obtain from Marvell's site)
For the sound: Realtek HD Audio Drivers (obtain from Realtek's site)
For the video: Obtain the latest ATI Catalyst driver package. Use Mobility Modder to enable them for install on your iMac (http://www.driverheaven.net/modtool.php)

How to upgrade to Vista from Windows XP Pro on system preloaded with Vista Business?

I have a new T61p preloaded with "Genuine Windows Vista Business downgrade to Windows XP Professional" and had it shipped with the Windows XP Pro downgrade.
Where can I can find the procedure to "upgrade" back to Vista if/when I decide to do so? I would also like to know the pro's and con's of doing so. For example: will I need to reload my applications, etc?
Please advise.
Thanks much.
Gary Grathen

Firstly you should create recovery discs for Vista and backup your files before downgrading to XP. When you are ready to revert back to Vista you can use these to install it.
The discs will return your T61p to it's factory state. Beforehand you will need to backup files and yes you will have to reload all your applications.
Message Edited by andyP on 07-03-2008 08:34 AM
Andy ______________________________________
Please remember to come back and mark the post that you feel solved your question as the solution, it earns the member + points
Did you find a post helpfull? You can thank the member by clicking on the star to the left awarding them Kudos Please add your type, model number and OS to your signature, it helps to help you. Forum Search Option T430 2347-G7U W8 x64, Yoga 10 HD+, Tablet 1838-2BG, T61p 6460-67G W7 x64, T43p 2668-G2G XP, T23 2647-9LG XP, plus a few more. FYI Unsolicited Personal Messages will be ignored.
Deutsche Community Comunidad en Español English Community Русскоязычное Сообщество
PepperonI blog

Oracle 10g Client not working from Vista Business

Hi,
I have installed Oracle 10g Rel2 DB on my desktop (OS Vista Ultimate X64 bit) and try to connect from my new laptop (OS Vista business) after installing the client software which does not work, whereas I am able to connect to same database from my other laptop using Windows XP. The tnsnames.ora files on both laptops have the same contents. Moreover, the SQL Plus is also not working on the vista laptop, I mean when I try to login the window closes down itself it doesn't stay open even to give any error message. . . Any ideas would be a great help . . .thx

Did you install the Vista specific Oracle client?
http://www.oracle.com/technology/software/products/database/oracle10g/htdocs/10204_winx64_vista_win2k8.html

Deployment/Installation Guides for IT Professionals Vista Business

Is there any information or guides for IT professionals on the following topics
- Performing a clean Vista install or removing all trial / third party software from a new Lenovo computer
- When first turning on a new Lenovo Vista Business Thinkcentre, Is it possible to login as the local administrator straight away. I seem to have to create a new local user, login, enable the administrator account, then delete the other account I just created

Its hard to say what you need, without knowing exactly what your goal is. Are you developing? Deploying? To what OS?
32 bit software needs 32 bit software. Visual Studio is 32 bit, so if you want to use ODT, you need 11g ODAC 32 bit, regardless of whether you're running it on 32 bit or 64 bit OS.
The end product that pops out Visual Studio though, is an exe that will run as 64 bit on a 64 bit OS (assuming you didnt change the "target" in VS from AnyCPU, which is the default), so you'll need 64 bit ODP and client for that. Or, you could change "target" in VS to x86 and the resulting app will run as 32 bit instead, even on a 64 bit OS.
Both 32 bit and 64 bit Oracle ODP / client can be installed on a 64 bit OS.
There currently is no 64 bit bundle of 11g ODAC you can download, but you can get the same functionality (ie, ODP with UDT support, ASP.NET providers, etc) by installing the 11106 x64 client, then patching it to 11107 with the rdbms patch.
There's really no reason not to run the existing app that was compiled with 10g using 11g anyway, and that will happen by default. However, if for whatever reason you want to use 10g instead, you'll need to delete the Policy.Oracle.DataAccess files from the GAC, as they redirect apps looking for older versions to the latest installed.
Hope it helps,
Greg
Edited by: gdarling on Feb 10, 2009 9:01 AM
Soooo, in summary, what I'd recommend you install is:
1) 32 bit 11g odac, which will give you ODT for your developers to use in VS.
2) 11106 x64 client into a seperate home followed by 11107 rdbms patch onto the 11106 x64 client, which will give you the ability to run odp apps outside VS.
3) If you're deploying to machines that only have a 10g client, then you'll need a 10g ODP home as well to compile with, as older clients cant use newer apps like that. For more info see the [ODT FAQ|http://www.oracle.com/technology/tech/dotnet/col/odt_faq.html#olderodpnet]

Installing Palm Desktop 6.2 on Vista Business: only installs Media and Install, no Cal, Contacts

I attempted to install Palm Desktop 6.2 under Vista Business on top of Palm Desktop 6.2 beta. I selected a complete install. After the installation and the device sync, only the Media and Install sub-applications were available on the desktop (though all were still available on the handset). No Calendar, no Memos, no Contacts, nothing.
I subsequently re-installed (twice), each time removing the Palm Desktop software completely (from the control panel). Same result. Is there some trick to this I need to know?
Thanks.
-- Ed
Post relates to: Treo 700p (Sprint)

Thanks, I very much appreciate the help. But why does this happen? I mean, after I tried it,
I figured, okay, maybe if I change the security permissions no the executable so that my id
has full control... But no. I did that (also changed the permissions on the link), but when I
bring it up under my account without running it as Admin, it still brings up only the media
portions of the Desktop. Then I went through c:\Program\Files\Palm and gave full control
permissions to my id for every executable I found in the top level directory. Still no joy.
I do appreciate the help -- it certainly beats not being able to access my calendar at all --
but I'm afraid I have to call this more of a workaround than a fix. For one thing, I'd like very
much to be able to access my calendar from a userid on this machine that does not have
Administrative privileges. Any chance for a fix at any point in the future?
Thanks again!
-- Ed

Hp officejet pro 8000 a809 installed locally on vista business with driver 8.12.2008cant share to xp

My customer has a HP Officejet Pro 8000 A809 installed locally on Vista Business with driver 8.12.2008 He wants to share this for use on the XP PC but after installation on XP and trying to go into printer properties the message comes up "The HP Officejet Pro 8000 A809 Series' printer driver is not installed on this computer. etc etc Do you want to install the driver now? It doesnt matter if you go through the installation process or not, when you try and print a test page you get "Test page failed to print. Would you like to troubleshoot etc"
I have tried installing the XP drivers locally AND on the Vista PC but with no luck. On the shared tab under "additional drivers" there are only Vista drivers listed.
Any advice gratefully received.
Dan

Depending on the model of the unit it may not be wireless. if it says A809n then it is a wireless model, but the A809a model is not. http://h10032.www1.hp.com/ctg/Manual/c01659070.pdf Here is the manual for that unit in case you need it.
If I have solved your issue, please feel free to provide kudos and make sure you mark this thread as solution provided! If you are not sure how to do this, please see the link below.
I am a Printer Tech for HP.
How do I give Kudos or mark a post as Solved?
I am an HP employee

Vista Business 64-bit on ALL Macs with Bootcamp 2.1

*With the latest Boot Camp Update 2.1 for Windows Vista 64, can ALL Macs (shipping as of May 2008) run Windows Vista Business 64-bit* (Business version is preferred for professional CAD applications)?
http://www.apple.com/support/downloads/bootcampupdate21forwindowsvista64.html
More particularly, all new Penryn 64-bits Macs such as iMacs, and not only the Mac Pro and MacBook Pro lines. Ref.: Apple refreshes iMac line, now up to 3.06GHz: http://www.appleinsider.com/articles/08/04/28/applequietly_refreshes_imac_line_now_up_to_306ghz.html
*Also, can we confirm that OEM versions are not supported, like I read on some discussions?*
Thanks,
Message was edited by: brun

What is the hardware difference between an iMac and a Mac Pro that prevents that? Is it purely an Apple restriction effort to Pro user base (investment of staff to produce the compatibility through drivers) and not a hardware restriction? An iMac runs on a Penryn chip, a 64-bit platform, therefore perhaps only the drivers would fix this apparent issue.
It still appears that some users were able to do it, re: http://discussions.apple.com/thread.jspa?threadID=1534484&start=0&tstart=0
The install disk would not even boot or Visa 64-bit would install, but not reboot under Vista?
I am reading that it is really a burden to install an OEM version.

ISight to run in MSN (Windows Vista Business via Parallels)

Hi guys !
I'm a MAC newbee and as I need to run some Windows applications I have installed Windows Vista Business via Parallels.
Everything works just fine - except for the iSight web-cam when running MSN. I have installed the AppleiSight drivers from the Leopard DVD into the Windows Vista and I did get it running once. But since then the iSight won't start if running MSN. The iSight works perfectly in PhotoBoot, iChat and so on, so there's no problem with the actual HW.
If I try ro re-install the drivers it seems they're already installed, still my MSN doesn't find any cam connected.
I read somewhere that I might need to make the iSight camera "available" to Windows, but I haven't been able to figure out where that might be - if that is really the case... ??!! So if anyone can point me in the right direction here it would be just awesome...
THANKS !!!

I am having trouble getting the isight to work with aMSN messenger. When the video comes up, I can see myself in the screen viewing box, but the person I am messaging cannot. I am aware that MSN is a microsoft program and therefore might not work with apple. aMSN says that my isight is firewalled or blocked by a router and that I need port forwarding. I was wondering if there is any way around this or if anyone knows the numbers involved for the port forwarding?
"If you are unable to view a webcam in aMSN after a contact has send you an invite, or after you have issued the command to receive/send webcam, and you are behind a router, you may need to follow these steps:
If you receive: IP-Restrict-NAT and you receive false in webcam wizard, that means your connection is firewalled. (does not send the IP)
If this is the case, you will need to open some ports for the webcam to use because they are currently blocked.
To do this, open your router web-based configuration (check router manual for details on this). Once you have the web-based configuration open, browse for a setting called "port forwarding" or "port range forwarding" or something similar to that. (This might be found under the advanced features for your router).
Now that you have the port forwarding page open, you will want to set the port forwarding range so that aMSN will be able to accept and send the webcam stream.
Here's an example of how you will set up your port forwarding:
Application: aMSN
Start: 6890
End: 6900
Protocol: Both(TCP & UDP)
IP: xxx.xxx.x.xxx
Enabled: X (Yes/True)
Note: xxx.xxx.x.xxx is the IP of your machine that you are trying to send / receive webcam
If you have a web server open on your port 80, you can try to disable it too, sometimes it helps."
-aMSN

Flash CS3 Activation in Vista Business 32bit

I'm posting this here since I just don't know what else I can
do... Flash customer service seems to be clueless.
We have a volume license for 10 installs of Flash CS3 Pro.
We've installed 2 of these already on XP machines without any
problems at all. Next, I tried to install it on my 32bit version of
Vista Business. I've ran into issues here, and I had to download
the file from adobe in order for it to install properly (it would
not install from the DVD). In any case, I've got Flash CS3
installed on the Vista machine.
However, when I try to activate it using the serial number
provided, I get an error screen that says "Too Many Activations"
and it points me to where I can buy another key or enter a
different serial number. At first, we thought there was something
wrong with our license, but since then, two other people have
installed Flash CS3 on their XP machines using the same license,
and none of them have a problem. However, each time I try to
activate under Vista, I get the "Too Many Activations" error.
We've contacted the volume licensing department, and they
decided it was not a volume licensing error and gave us a phone
number of their tech support. We next called the tech support
department, and after many transfers, uninstalls, reinstalls, etc,
technical support decided it was not a technical issue and sent us
to the activation department. We then called the activation
department and they told us they do not deal with volume licenses,
and sent us back to the volume licensing department!
It seems pretty clear that Adobe has no clue how to fix this
issue, and no department is willing to even take a serious look at
it. On our final call to the volume licensing department, we spoke
for a while and they told us this issue will take a bit longer to
fix and that they will call us within two days. It has been 5 days
now, and it seems Adobe has decided to ignore us. This is extremely
frustrating.
If anyone has ran into this issue when attempting to activate
under Vista, and has a workaround, could you please post something
about it here? Thank you very much.

Here is a little update for anyone who may be experiencing
the same issue...
I was able to find the phone activation screen. In the screen
shot I posted above, you can click next while having the first
option selected. It will go to another screen that allows you to
select phone activation via "other activation options" link (or
something similar).
However...
I attempted to activate over the phone. The phone activation
failed, and I spoke to a person who determined that this is not an
activation issue. I was then transferred to the volume licensing
department (sound familiar? scroll up), and they said they do not
deal with activation, and transferred me back to the activation
department. The activation department again said it was not an
activation issue, and they attempted to transfer me back to the
licensing department... after I complained that they just keep
bouncing me back between the same departments, they again said that
they will escalate the issue, and will call me back (the EXACT same
response I received several days ago when I spoke to them). So,
again, I'm waiting for a phone call back from Adobe which will
probably never come. Good luck!

I get "ordinal 5 (and at times 18) is not found when trying to start the application? Using windows Vista Business.

when starting the application I get the following message "ordinal 5 ( and at times 18) can not be found in the dynamic link libray" I'm using a Lenovo x300 with "Vista Business"

Have you tried to put the Main-Class under a package (e.g. move LaunchSimulator to org.jyothi.sunke.LaunchSimulator or something)? I'm not sure but it's possible that Main-Class can't be located in the "root package", because the JAR launcher can't address it.
Always put your stuff in a package, otherwise it can't be addressed by other packaged classes.
- Erik

Vista Business Extremely Slow HDD Speed

Just installed Vista Business on a brand new MacBook Pro 15". Installation went completely without hiccup, all hardware appears to work fine.
However, I am trying to transfer 30Gb of data to the internal HDD. I have tried transfers over the network (Gigabit), from an external USB 2.0 HDD, and internally from the Mac partition to the Boot Camp partition. Under no circumstances can I achieve a transfer rate higher than 1.5 Mb /sec.
Any ideas? All updates have been installed...

t3kka wrote:Reading around on some other threads I found regarding a slow login to tty I noticed some folks state that a large root partition could be the problem. My HDD is 500GB with the root, var, swap, and home partitions being ~80GB, ~20GB, ~6GB, and then the remainder as in home (respectively). Maybe having a large root partition along with the location of the home partition makes the HDD head travel a much further distance which is physically equated to a delay in login and other actions. With such a large HDD, what would you recommend for partition schemes?
I have a 640 gb 5400rpm drive, and I've installed arch with only a huge root partition on it in the past, and had no speed issues (currently I have a 40gb root and a ~595gb home and a 5 gig swap).
Last edited by bwat47 (2012-06-24 20:56:03)

Audigy 2 ZS Video Editor & Vista Business installation iss

So this is my letter to?Creative who have yet to respond, does anyone have a similar set up to me who can shed some light on this issue and fixing it. Having no sound and not being able to listen to itunes is not a good thing.
To Engineers,
Firstly id like to say I?m very disappointed in purchasing this $400 AUS SB Audigy 2 after looking on your website and seeing the Microsoft vista logo plastered everywhere thinking this device would be compatible, quite clearly it is not as I have installed/uninstalled drivers and disks..only to find that it is pointless..
So here I am about to explain my situation in order for you guys to find me a suitable driver ASAP.
I currently have a HP M777A running on Microsoft Vista Business with 3.06GHz and 2x GB Kingston Memory..
In my office I have a 5. speaker surround which sits with my 9?LCD which I like to listen to music from and watch DVD?s.
In my lounge room I have a 42? LG Plasma Display which also runs with my Denon AV4306 Recei'ver which also have a 5x speakers surround.
Prior to Vista, I was able to watch DVD?s or listen to music through iTunes which was being powered through my PC, I was able to do this simultaneously in both rooms. This is what I need to achieve again very soon.
After scouring dozens of websites and reading this products pitch lines which states that this virtually anything can be played through it, well this is why I bought it.. But I?m very disappointed.
My question to you guys is this.
. Is there a driver or something I can load up to fix my problem
2. ?If NOT, then how long will it take to be released.
3. ?If so, how do I find out about it when it is released.
4. Etc etc.
Please advise ASAP with a solution I can work with.

Copied from the Video forum - (related to video operation under Vista)
I have used the follwoing procedure to install a working configuration of the Audigy 2 ZS Video Editor in a clean install of Vista Ultimate.
() Download from Creative Labs (US) site: http://us.creative.com/support/downloads/ the following files:
(a) Creative Sound Blaster USB Series Windows Vista Driver .00.0060 - USBVS_PCDRV_LB__00_0060.exe (from the Vista section)
(b) VidCap for Creative Sound Blaster Audigy 2 ZS Video Editor .00.000 - A2VX_PCVDE_L9__00_000.exe (from the WinXP section)
(2) Use WinZip or WinRAR to open the file (b) and extract the folders \DrvInst and \Vidcap into your Vista Downloads folder.
(3) Connect the Video Editor to the power supply and a video source; connect the USB cable to your PC. Ignore the "Found NEw Hardware" dialog that pops up.
(4) Doubleclick on file (a) to install the Creative Sound Blaster USB Series Windows Vista Driver, and follow prompts as required; accept all defaults. After install is complete, let the PC reboot.
(5) After rebooting, in the "Found New Hardware" dialog that appears, select the options to search for a driver, don't go online to search, browse for a driver and point the search at the \DrvInst folder you extracted in (2) above. The USB video driver will be installed from the \DrvInst\Video\Driver\Win2k.
(6) After the video driver is installed, doubleclick on the Setup.exe file in the \Vidcap folder you extracted in (2) above to install the Vidcap application.
(7) Setup the options in Vidcap, and run a test recording.
Happy capturing under Vista.Message Edited by Dale-CL on 04-8-2007 :3 AM

Thinkpad X200 Vista Business 32-bit Wireless network problems

Hey guys!
I seem to have a persistent problem with my two Lenovo Thinkpad X200, which I simply can't manage to figure it.
I have recently restored the computers to factory settings, which meant downgrading from Windows 8 to Windows Vista Business 32-Bit.
Now, everything with the installation went as planned until I had to test if everything was working. A lot of the drivers seem to be missing and since I do not still have the original manufacturer's disc, I do not know what to do.
I downloaded the ethernet driver from Lenovo's website and that is now fully functional.
I have also tried everything in regards to making the wireless internet work, but without any luck. When I try connecting to the wireless internet, Windows simply can't detect any networks and when I try using Windows function to find a solution to the problem it simply says "This computer does not have a wireless network adapter installed and configured".
I have tried downloading all the wireless lan driver for Windows Vista 32-bit from Lenovo's website, but I still cannot get the wireless network to work.
Any help would be highly appreciated
Thank you in advance

Does the wireless LED light up?
Try Fn+F5?
W520: i7-2720QM, Q2000M at 1080/688/1376, 21GB RAM, 500GB + 750GB HDD, FHD screen
X61T: L7500, 3GB RAM, 500GB HDD, XGA screen, Ultrabase
Y3P: 5Y70, 8GB RAM, 256GB SSD, QHD+ screen

10g and 11g installation problem on Vista Business version

Hi Everyone
I could not get either 10g or 11g database install in my vista business version.
11g Oracle universal installer was running, but many button does not work, like the folder browser and at some stage the program just terminate itself.
10g gave me a total green screen during the universal installer, the window taskbar showed the installer was running.
someone said it is the jre problem but i dont know how to fix it anyway. I tried to remove or update jre in my computer, but nothing get better.
My window has the newest updates. below are the database files i was using from oracle.
11g - win32_11gR1_database_1013.zip
10g - 10203_vista_w2k8_x86_production_db.zip
Could someone help me please, thank you.
Bryan

Please consider opening this as a completely separate question rather than a continuation of an existing, but not quite related, question.
The reasons include:
- each user sees a summary page which reveals the topic of the first question asked - yours is now buried;
- others may wish to contribuite to the original and you have now side-tracked (if not completely derailed) it
- you are able to assign helpfulness points of your own which encourages some to participate in YOUR issue
- it is consideredd normal courtesy in forums

Audition under XP x64 or Vista Business x64?

Similar Messages

Maybe you are looking for