AUR website issues on Arch, but not Win32

I've been having the same page load interrupted error on Arch Firefox for a few days now. However, accessing it on Win32 Firefox still works. I'm using Firefox 13.0 on both systems, and everything else on Arch is fine -- I can access the main Arch website, sync pacman, etc. There's just this very strange bias against accessing the AUR on Arch for some reason.

plenty wrote:I've picked up this problem now;
I can ping aur.archlinux.org
Internet browsing is fine, except the AUR site, plus I can download & install freely using pacman.
I have commented out the mtu interface option - restarted network -rebooted - all without success.
Please - has anyone got a definitive fix?? It's almost funny how I've practically ground to a halt in all matters linux without access to the AUR! It's really true what they say - 'You don't know what you've got 'til its gone'.
AUR is down...   so "your" issue will magically fix itself soon

Similar Messages

  • Why is my Apple ID working on the Apple Website on the computer but not restoring my ipad... What is the problem with it????

    Why is my Apple ID working on the Apple Website on the computer but not restoring my ipad... What is the problem with it????

    LeesaHeeley wrote:
    When I go to settings/iTunes App Store my Apple ID is not there. When I enter my ID and password it does not save or link to account.
    When fist setting up your new iphone you will be asked to log in with an apple id and password. If this did not happen you can then do as you suggested going to settings to itunes and app store and add your apple id login. This apple id login must have already been created for the iphone to accept it. If this apple id is already created but is not being accepted by your iphone you then should shut down your iphone and restart the device.
    Good luck.

  • DVD Drive issues, plays CDs but not DVD data or regular - Satellite (unknown series type)

    I tried to update the firmware but ran into some strange issues. First of all according to google, the drive is manufactured by Panasonic. Toshiba doesn't make their own drives? For this reason I wonder if it is improperly detecting the drive make/model.
    Anyways I downloaded the firmware update for it, version 1.03. It is a MAT**bleep**A UJDA760 (going from memory, model may be slightly diff like UDJA). When I run the firmware update it doesn't detect the drive at all and says it is for a THINKPAD?? Weird...
    Also, if you have a link to a guide for removing this drive I would appreciate it. I want to verify that windows is detecting the model/maker correctly. It is not one of the simple hotswap types, it looks like I have to remove at least the entire bottom of the laptop.
    I am working on this for a client, I do tech repair on craigslist but my laptop hardware expertise is limited most of my experience is with desktops.

    joe7dust wrote:
    I tried to update the firmware but ran into some strange issues. First of all according to google, the drive is manufactured by Panasonic. Toshiba doesn't make their own drives? For this reason I wonder if it is improperly detecting the drive make/model.
    Anyways I downloaded the firmware update for it, version 1.03. It is a MAT**bleep**A UJDA760 (going from memory, model may be slightly diff like UDJA). When I run the firmware update it doesn't detect the drive at all and says it is for a THINKPAD?? Weird...
    Also, if you have a link to a guide for removing this drive I would appreciate it. I want to verify that windows is detecting the model/maker correctly. It is not one of the simple hotswap types, it looks like I have to remove at least the entire bottom of the laptop.
    I am working on this for a client, I do tech repair on craigslist but my laptop hardware expertise is limited most of my experience is with desktops.
    Typically if the optical drive can read CDs but not DVDs (or vice versa), there has been a hardware failure of the DVD or CD circuitry.  Drivers/firmware aren't going to solve the problem, only replacement of the drive.
    Find the correct drive at http://www.sparepartswarehouse.com/
    Find unofficial disassembly instructions at http://www.irisvista.com/

  • My website works in IE but not firefox

    this is my web page:
    http://www.andrew-leonard.co.uk/Mallorca/mallorca%20ferns.htm
    It usess css to define layers and javascript to show and hide the layers. It uses a dhtml menu system by Milonic to execute the javascript
    This is part of the code for the layers:
    <pre><nowiki><style type="text/css">
    #Layer01 {position: absolute; left: 300px; top: 50px; z-index:1;}
    #Layer33 {position: absolute; left: 300px; top: 50px; z-index:33;}
    </style></nowiki></pre>
    This is part of the javascript to show/hide the layers:
    <pre><nowiki><script>
    function showlayer(layer){
    var myLayer = document.getElementById(layer).style.display;
    if(myLayer=="none"){
    document.getElementById(layer).style.display="block";
    } else {
    document.getElementById(layer).style.display="none";
    </script></nowiki></pre>
    It works OK in IE but not firefox

    If you check Firefox's Web Console (Ctrl+Shift+K) it'll tell you any errors it's finding and the line of code it's finding it on.
    The problem it seems to be having up front is that IDs are case-sensitive - "layer02" is not the same as "Layer02", for example.
    There may be further errors once it's past that, but all the current browsers come with the tools you need to weed out any further issues.
    Further Javascript reference: https://developer.mozilla.org/en-US/docs/JavaScript

  • Why am I now having certificate issues with Firefox but not IE?

    I can no longer log into Gmail, Facebook, Amazon, etc... using Firefox. I get the following error "accounts.google.com uses an invalid security certificate. The certificate is not trusted because no issuer chain was provided. (Error code: sec_error_unknown_issuer)". It works with IE but not Firefox. This just started a few days ago - prior to that I was able to log into those https sites without issue.
    Any suggestions? Thank you.

    "browser.xul.error_pages.expert_bad_cert" was set on false so I set it to true and tried reloading.
    Got the page giving me the option to add exception and continue. Kept trying that and would not continue to the page even after accepting 10+ times.

  • Sign in Issue on pc but not on Lync throughOWA.

    Hello,
    We have an issue with one of our users. He is able to use Lync through OWA but not with Lync 2010 client. Our infrastructure is Lync Server 2013 On-Premise + Exchange 2010 On-Premise.
    I tried to sign-in my own computer with his account without success.
    I got this error :
    "Sign-in didn't work.
    You didn't get signed in. It might be your sign-in address or logon credentials."
    I already deleted then recreated his Lync account with the Lync Control Panel, but it did not resolve the issue. I know that this user has a previous Lync account on another domain on our AD forest that has been deleted.
    Does anyone have an idea or where to look for ?
    Thank you
    Jonatan

    Good troubleshooting steps, Eason, but I am wondering if they may be unnecessary since Jonatan has already tried logging in with the problematic user account on his own computer (where your login presumabley works without issue?).
    At any rate, this does indeed sound tricky. I am having a hard time thinking of why a user account would be unable to sign in from a desktop client, but not have issue in OWA. Is it possible to also try signing him in on a mobile device, assuming you have Edge
    access setup and the user is allowed External access via policy? Also, my advice at this point is to take a good look at the 'Lync-UccApi-0.UccApilog' log file in this directory: 'C:\Users\<username>\AppData\Local\Microsoft\Office\15.0\Lync\Tracing\.'
    If the file looks too big and cumbersome, try deleting the file with the user logged out, and then have them try the login again. The file should be recreated, and will only have the data relating to his sign-on attempt. If you find anything interesting in
    it, but need further help with interpreting what you found, feel free to copy it here, and I will do my best to assist!
    -Regards,
    Josh B. | MCSE: Communication; MCSA: Office 365
    Blog: http://blog.msucguy.com
    View Josh Blalock's
    profile

  • I can boot into Arch, but not DM or DE [solved]

    I just recently installed Arch in VirtualBox. Arch is running on 1GB of RAM (changed from 512MB) and 8GB of storage with dynamic size enabled. I set the specs low as I want this to be portable and load on almost any machine. When it boots up I can access command line, but not DM or DE. If I set it to automatically boot into a DM or DE, it hangs (black screen). I have tried different DMs (GDM, KDM, SDDM) and DEs (Gnome, KDE, Plasma), but I get the same problem. During the boot process I get intel_rapl: no valid rapl domains in package 0 and SMBus base address uninitialized. While researching though, these problems don't appear to be linked to mine. Any advice would be helpful, thanks.
    Last edited by flavinator (2015-06-12 04:46:33)

    flavinator wrote:Update: So, I'm a little lost. I got all the packages installed. I edited the xinit file the way it says to. I chmod it.
    Why did you chmod it?  This is not in the instructions.
    flavinator wrote:When I startx though, X has no file or directory, and don't see where it says how to create one.
    What does this mean?  Is this some translation or interpretation of an error message?  Post the *actual* output.
    flavinator wrote:I thought it would do that when XDM installed.
    XDM is also not part of the instructions for testing TWM.  If you start doing random other steps, we will not be able to help you as we will not understand what state your machine is in.
    flavinator wrote:Update 2: I got startx to run, but then it fails with "Using system config directory "/usr/share/X11/xorg.conf.d" 0x00c00000, type = 1) Invalid argument (22) (II) Server terminated successfully"
    Please post the *full* output.  The server terminated successfully suggests a problem with your xinitrc, so as ewaller requested, we'll need to see that - after you provided the actual output and error messages you are getting.

  • Flash website working in FF but not IE7

    www.gamespamusic.net is
    working in FireFox but not working in IE7 I dont know whats going
    on here. Can someone help me with this??? Im trying to figure this
    out but its seems like i cant lol. Please HELP

    Ive also had others try it in both IE7 and FF and they come
    up with the same problem where the screen is white in IE7 and it
    works in FF. I dont know what the problem is.

  • AX Issue w/ PC but not MBPro?? Riddle me this Batman

    So I can connect all the computers in the house if my AX is not secured w/ a WPA2 password, but once protected my MBPro and GF's Laptop connects fine but not the PC Gaming machine. I run AP Utility and it can't find the Apple Device?? If I reset the AX then I can connect again because it's a unsecured network again and I can then set up the router w/ AP Utility. Once I encrypt it I loose the network again?? Bizarre Right??
    Help Pls!!

    Here is the thing. Before I bought my MBP the PC that won't connect, was used to set up the network and worked w/ a WPA/WPA2 Personal password. So I know it works. Now that I have this laptop it won't find the network once encrypted and I have downloaded all the newest and latest patches and software updates, so it isn't that... I don't think. But lets keep tryin', I'm sure we are close to a solution. Right? I'm wondering if once it personalizes the network steps away from just using the default settings, somehow it changes the path in which the PC uses to find the network is modified somehow (poking in the dark now). Prolly doesn't make a difference. Any other suggestions?

  • Why am I able to logon to certain website on an IPad but not with an Iphone

    I am able to log into certain internet sites on an IPad but not on my IPhone, why not?

    Please check if all your plugins are up-to-date. To do this, go to the [http://mozilla.com/plugincheck Mozilla Plugin Check site].
    Once you're there, the site will check if all your plugins have the latest versions.
    If you see plugins in the list that have a yellow ''Update'' button or a red ''Update now'' button, please update these immediately.
    To do so, please click each red or yellow button. Then you should see a site that allows you to download the latest version. Double-click the downloaded file to start the installation and follow the steps mentioned in the installation procedure.

  • I get error messages when I try to visit certain websites using Mozilla Firefox but not when I use other browsers

    About two days ago I noticed that when I tried to access certain websites using Firefox I always got this error message; "The connection was reset". I initially thought it was a problem with my isp before noticing that the network was fine on my phone and iPad. I then attempted opening the same links that brought up the error message on the TorBrowser and it worked perfectly.
    Basically the only website that works on my Firefox browser right now is Google but if I do a search on Google and then click on any link that comes up as a result I get the same error message, "The connection was reset". I can also log into my gmail account but I cannot access any other website including Feedly, Tumblr, Twitter, Yahoo, Wordpress, Blogspot, even though they work fine on my other browser.
    I cleared my cache and cookies, wiped out all the browsing history but the problem persisted so I uninstalled Mozilla Firefox and reinstalled it. The problem is still there. I checked the proxy settings, I went through all the solutions on this page https://support.mozilla.org/en-US/kb/firefox-cant-load-websites-other-browsers-can?esab=a&as=aaq and still nothing. I am not sure what the problem is here but any solution will be much appreciated. I have used Firefox for years now and I am not really comfortable using another browser.
    I use a Macbook OS X Version 10.9.4 and the latest Firefox 32.0.1

    Create a new profile as a test to check if your current profile is causing the problems. <br>
    See '''Creating a profile''':
    *https://support.mozilla.org/kb/profile-manager-create-and-remove-firefox-profiles
    *http://kb.mozillazine.org/Standard_diagnostic_-_Firefox#Profile_issues
    If the new profile works then you can transfer files from a previously used profile to the new profile, but be cautious not to copy corrupted files to avoid carrying over the problem <br>
    '''Profile Backup and Restore'''
    *http://kb.mozillazine.org/Profile_backup
    *https://support.mozilla.org/en-US/kb/back-and-restore-information-firefox-profiles
    *http://kb.mozillazine.org/Transferring_data_to_a_new_profile_-_Firefox

  • My Fullbrowser Portefolio Website work in SWF but not work in HTML

    Hi people
    First of all I am not very good in English language.
    I created my portfolio website in flash as3, with javascript (SWFAddress and SWFObject), with contact form with PHP, and XML Gallery.
    When uploading all the files into the correct folders for the server, the first times I view the site in browser it works correctly, the browser reads the HTML without any problems.
    However I tested it on firefox, safari, ie, google chrome, and it just did not work in google chrome, so I tried to solve the problem, beginning to see where the error was in the HTML file.
    I copied the original file, because that original file I knew it was working properly in other browsers, and started to make changes. I managed to get google chrome to open the HTML correctly but then did not work in firefox and safari.
    So I decided to eliminate this html file and continue with the original file. I'll test again and something happen! The file browser can't read XML, everything else works correctly, alltransitions are correct, the animations are correct.
    I try with the SWF and it opens the XML Gallery, I try with the HTML and it does not open.
    I don't know what to do, can you guys help me?
    Thanks!

    If the swf file is in a different folder than the html file, then it is might be a problem with targeting the XML file in the swf.  When you place an swf file in an html page, anything that swf tries to load has to be targeted as if the swf file is in the same folder as the html.  It does not have to live in that same folder, but it has to act as if it does.

  • Huey pro issue, almost resolved, but, not quite

    This machine and windows 7 are not a match made in heaven. Love the operating system, but, its totally a pain with the W700 stuff.  I have fully updated *everything*, it beeps like it is calibrating, it says its finished and successful, but, it doesn't do a thing. I have had this machine since 2009 and its always an issue after a clean reinstall of windows. this time worse than usual. This was working absolutely perfectly until I reinstalled windows. Yes, I have the latest driver. (heck, its taken a ton just to get it to work at all!)   I know it is a minor little software error but for the life of me I cannot figure out what

    Yes, you can switch it and it may be that my judgement is bad. I went in and messed up the color and it did change it. I think the monitor I am on is too warm and that may be affecting my perception on the Lenovo being too cool. I am going to mess with it some more this evening. Its my favorite feature on the w700

  • Why is it that I can recieve my banking information from a website on Internet Explorer but not on FireFox

    I can gain access to my bb&t banking account on Internet Explorer but when I try to enter the same website on FireFox the following message appears:
    Service Unavailable
    The server is temporarily unable to service your request.
    Explanation
    The server is unable to service a request because a needed resource is unavailable.
    Solution
    Please try again later.

    Hi, I have the same problem, but I have been using firefox 10 for some time. Everything worked well until 3 days ago, when I could not access my internet banking account. As above, I got a service unavailable message from my bank.
    I can connect with internet explorer and safari. I have removed firefox 10 and reinstalled it, but still can not access my bank.
    Any ideas

  • I have constant connectivity issues with Safari but not if I use Chrome.  Why is this?

    My wifi is connected yet when I launch Safari, I constantly receive error messages about connectivity yet if I launch Chrome instead, I have no problems.  Do I just not use Safari or is there a way to fix this?  Thanks!

    Go step by step and test.
    1. Power off the router. Unplug it from the wall. Wait a while.
        Plug it back to the wall. Power the router on. Wait until all the lights are lit properly. It will take a while.
        Restart the computer.
        Start up in Safe Mode.
        http://support.apple.com/kb/PH14204
    2. Deselect Proxies if selected.
       System Preference > Network > Advanced  > Proxies Tab
       Under "Select Protocol", uncheck any box if selected.
       Click "OK" then  "Apply”.
    3. Delete Caches.db
        Close all windows and quit all applications.
        Hold "option" key down and click "Go" menu in the Finder menu bar.
        Select "Library" from the dropdown.
        Library > Caches > com.apple.Safari > Caches.db
        Right click the Caches.db file and select "Move To Trash.
        Close windows and relaunch Safari.
    4. Empty Caches
        Safari > Preference > Advanced
        Checkmark the box for "Show Develop menu in menu bar".
        Develop menu will appear in the Safari menu bar.
        Click Develop and select "Empty Caches" from the dropdown.

Maybe you are looking for