AUSST problem with AdobeUpdater.Overrides
Hey,
I'm trying out the Adobe Update Server Setup Tool. I have prepared the IIS 7 for the job and done the part "Performing One-Time Setup" in AUSST technotes with DEFAULT settings except for the server URL of course. The website works fine otherwise - I can browse directories and files - but accessing config/AdobeUpdaterClient/win/AdobeUpdater.Overrides gives me
404 - File or directory not found.
The file surely is there but there seems to be a problem within the file.
Here's a tricky one: where can I get support for this software?
Similar Messages
-
I use dreamweaver 8.02 and recently downloaded dreamweaver
CS3 as a trial. I subsequently deleted CS3 via control panel
add/remove programs. Now i have a problem that ALL the time
adobeupdater.exe is running and takes 50% of the CPU. I cannot
close the program via windows task manager. I can find two files
that may be relevant (both hidden files). The first is
adobeupdater.exe-27A3E5C5.pf in the C:\windows\Prefetch directory.
It was last accessed today. the other is adobeupdater.exe in the
c:\program files\common files\adobe\updater5 application that was
last accessed in february 2007. There are no other files in any
directory that include the name 'adobeupdater". There are also
still a few CS3 files in my adobe directory, and i cannot delete
them because it references a file is runing - close it first. That
must reference the adobeupdater file - which i cannot delete.
Finally, i tried downloading the adobeupdater 8.02 and was
unsuccessful. My question is how to i get adobeupdater to stop
hogging my CPU?My final update - after reading forums on adobe reader, and
deciding my problem was not due to the install/uninstall of
dreamweaver, i found some answers. It seems the problem with
adobeupdater taking a lot of CPU resources is not uncommon. I
followed the directions MarkATS to the question of Jeremy Moser
(July 3, 2007) on the subject of "updater". Mark suggested 3
possible solutions and after one was unsuccessful i did all three,
after uninstalling and reinstalling adobe reader. I was successful
about eliminitating the CPU problem and adobeupdater is no longer
running in the background. But, i cannot "update" adobe reader by
the help file menu (since no files need updating maybe there is no
adobe response in the program to indicate that. But, that is a
small problem - i can download new versions when i hear about them.
Meanwhile it is nice to have my computer back to where it has
enought CPU free so i can do some work. I put this note in here so
no has to waste their time responding. -
Steps to troubleshoot and get past common problems with Audition
When you encounter a problem with Audition, the following steps are often useful for getting past the problem and/or determining the cause of the problem:
1. Hold down SHIFT while you launch Audition
This overrides the preference files and launches Audition using the default settings.
2. Manually rename or delete the preferences folder
Step 1 only overrides certain preference files, while others such as Workspace preference files, may be the cause of the problem. Depending on your OS, locate the "5.0" folder in the location below and rename it or delete it.
Windows XP: C:\Document and Settings\<username>\Application Data\Adobe\Audition\5.0\
Windows Vista/7: C:\Users\<username>\AppData\Roaming\Adobe\Audition\5.0\ *
Mac OS X: ~\Library\Preferences\Adobe\Audition\5.0\ **
* "AppData" may be a hidden folder. You can type it into the location bar, or enable "Show Hidden Files" in Windows.
** This is your user-level Library folder, not the system-level tree.
3. Check your Audition Log.txt file
To enable a log file with CS 5.5, you must create an empty file in your preferences folder called "Audition Log.txt" using notepad, text edit, or any other editor. After you create this file, launch Audition and if it fails, open and/or share the log file for more specific information about what's happening.
4. Check the Operating System console or error log
Both OS X and Windows can track application errors, and if the problem is occurring outside of the application code - a driver conflict, for example - then the OS error report may be more informative than what we can get from the application.
OS X: launch /Applications/Utilities/Console.app Clear the view, then launch Audition and note any error messages that appear.
Windows: launch Control Panel > Administrative Tools > Event Viewer > Windows Logs > Application then launch Audition and note any error messages that appear.
5. Re-install Audition
If at this point, nothing has resolved the issue or the error logs are inconclusive, it's a good time to uninstall Audition, reboot, and reinstall Audition.
6. Obtain the full crash dump and send it to the Adobe team
So you've walked through all the above steps, you've disconnected any external hardware interfaces to rule out any device or driver conflicts, and you've exhausted the basic troubleshooting steps. Visit http://forums.adobe.com/thread/900619 and follow the steps for your OS that Charles has documented to best obtain a full crash memory dump for Audition, and send that to [email protected] with a description of the problem and the steps you've taken, and we'll take a look.Firstly yes these are common problems and secondly hopefully they will be fixed with updated software 2.1 which is due for release this coming Firday!
-
Problems with pacman applet, and advice on a gaming portfolio
Hi
I recently made a pacman applet, im having a few problems with it though, the first time the applet is run on a browser, the ghosts(represented by squares) often dont appear or if they do, they are stuck in walls, this never happens when i run offline on my computer. Is this because the very first time the applet is run, it doesnt load properly, but the second time some of the files are in the cache so it loads fully?
Also everytime i refresh the browser the applet dissapears and is replaced with a blank space and a cross in the top left hand corner, does anyone know the reason for this?
The applet can be found below, if you do decide to play it, please bear in mind what i have said, so it might not load correctly the first time, if this is the case please refresh, or close the broswer and reopen the link! Also you will need to click the applet for it to gain focus before you can move pacman - use the arrow keys the control pacman.
http://www.renaissance-designs.co.uk/Satwant/java/pacman/
Id also be very gratful for some advice - id like a change in career, ive always wanted to get into gaming, ive had some previous knowledge in java i made a programme that could generate its own poetry in java for my dissatation, but i still never had a huge amount of confidence, and so went into websites.
BUT now i have decided to take the leap back into programming and give it a go, which is why ive made this game.
I thought id make a portfolio and try and apply for a few gaming jobs. This applet took me two weeks to make and it was in my spare time, i am fully aware its not perfect, and it doesnt look great, but i would like to know what people think of it, also how many more games do you think i should make, before i apply for gaming jobs? Does anyone have any advice on what would make a good portfolio for a java gaming job?
Thanks alot, i look forward to what you think of the game, and your advice!
SSKenthsskenth wrote:
Thanks for getting back to me with that information, i didnt know you could see that information with just a simple right click!
But im afraid that doesnt really help me solve the problem, im not sure what all of that information means! :SI have very little experience with applets, but I can tell you what I would do to debug this (forgive me if you already know this stuff).
Look at the stack trace you get in the Java Console that I posted earlier. Each line contains a method that was called from the method on the previous line. So, java.lang.Thread.run() called sun.applet.AppletPanel.run(), which called Room.init(), etc. Look at the topmost line whose method is something you wrote, not something in the standard Java libraries. In your case it looks like PaintSurface.java (specifically, line 22). Look at what line 22 of PaintSurface.java is doing, it's calling Thread.start(). If you check out the Javadoc for Thread.start(), it says IllegalThreadStateException gets thrown if you call start() on a thread that has already started. So that's your problem. Without looking at your code, I'd assume you want to stop your thread in your applet's destroy() override, and instead of reusing it, create a new one each time init() is called.
Ill try and look into, thanks again though, it gives me somthing to work with :D
Btw when you first ran the applet, did all the ghosts(3) load up correctly?Unfortunately, no. The first time I ran it, there was only 1 ghost (or maybe all 3 overlapping each other?) at the top of the screen, and they never moved. Refreshing once made the game play as I think you want it to. Refreshing a third time gave the dreaded red X.
...oh and just out of curiosity,,, did u have fun playing the game :DSure did. -
Advance level drawing problem with Jframe and JPanel need optimize sol?
Dear Experts,
I m trying to create a GUI for puzzle game following some kind of "game GUI template", but i have problems in that,so i tried to implement that in various ways after looking on internet and discussions about drawing gui in swing, but i have problem with both of these, may be i m doing some silly mistake, which is still out of my consideration. please have a look at these two and recommend me one of them, which is running without problems (flickring and when you enlarge window the board draw copies (tiled) everywhere,
Note: i don't want to inherit jpanel or Jframe
here is my code : import java.awt.BorderLayout;
public class GameMain extends JFrame {
private static final long serialVersionUID = 1L;
public int mX, mY;
int localpoints = 0;
protected static JTextField[][] squares;
protected JLabel statusLabel = new JLabel("jugno");
Label lbl_score = new Label("score");
Label lbl_scorelocal = new Label("local score");
protected static TTTService remoteTTTBoard;
// Define constants for the game
static final int CANVAS_WIDTH = 800; // width and height of the game screen
static final int CANVAS_HEIGHT = 600;
static final int UPDATE_RATE = 4; // number of game update per second
static State state; // current state of the game
private int mState;
// Handle for the custom drawing panel
private GameCanvas canvas;
// Constructor to initialize the UI components and game objects
public GameMain() {
// Initialize the game objects
gameInit();
// UI components
canvas = new GameCanvas();
canvas.setPreferredSize(new Dimension(CANVAS_WIDTH, CANVAS_HEIGHT));
this.setContentPane(canvas);
this.setDefaultCloseOperation(EXIT_ON_CLOSE);
this.pack();
this.setTitle("MY GAME");
this.setVisible(true);
public void gameInit() {
// Shutdown the game, clean up code that runs only once.
public void gameShutdown() {
// To start and re-start the game.
public void gameStart() {
private void gameLoop() {
public void keyPressed(KeyEvent e) {
public void keyTyped(KeyEvent e) {
public void gameKeyReleased(KeyEvent e) {
PuzzleBoard bd = getBoard();
for (int row = 0; row < 4; ++row) {
for (int col = 0; col < 4; ++col) {
if (e.getSource() == squares[row][col]) {
if (bd.isOpen(col, row)) {
lbl_score.setText("Highest Score = "
+ Integer.toString(bd.getPoints()));
setStatus1(bd);
pickSquare1(col, row, squares[row][col].getText()
.charAt(0));
protected void pickSquare1(int col, int row, char c) {
try {
remoteTTTBoard.pick(col, row, c);
} catch (RemoteException e) {
System.out.println("Exception: " + e.getMessage());
e.printStackTrace();
System.exit(1);
// method "called" by remote object to update the state of the game
public void updateBoard(PuzzleBoard new_board) throws RemoteException {
String s1;
for (int row = 0; row < 4; ++row) {
for (int col = 0; col < 4; ++col) {
squares[row][col].setText(new_board.ownerStr(col, row));
lbl_score.setText("Highest Score = "
+ Integer.toString(new_board.getPoints()));
setStatus1(new_board);
protected void setStatus1(PuzzleBoard bd) {
boolean locals = bd.getHave_winner();
System.out.println("local win" + locals);
if (locals == true) {
localpoints++;
System.out.println("in condition " + locals);
lbl_scorelocal.setText("Your Score = " + localpoints);
lbl_score
.setText("Highest Score = " + Integer.toString(bd.getPoints()));
protected PuzzleBoard getBoard() {
PuzzleBoard res = null;
try {
res = remoteTTTBoard.getState();
} catch (RemoteException e) {
System.out.println("Exception: " + e.getMessage());
e.printStackTrace();
System.exit(1);
return res;
/** Custom drawing panel (designed as an inner class). */
class GameCanvas extends JPanel implements KeyListener {
/** Custom drawing codes */
@Override
public void paintComponent(Graphics g) {
// setOpaque(false);
super.paintComponent(g);
// main box; everything placed in this
// JPanel box = new JPanel();
setLayout(new BoxLayout(this, BoxLayout.Y_AXIS));
// add(statusLabel, BorderLayout.NORTH);
// set up the x's and o's
JPanel xs_and_os = new JPanel();
xs_and_os.setLayout(new GridLayout(5, 5, 0, 0));
squares = new JTextField[5][5];
for (int row = 0; row < 5; ++row) {
for (int col = 0; col < 5; ++col) {
squares[row][col] = new JTextField(1);
squares[row][col].addKeyListener(this);
if ((row == 0 && col == 1) || (row == 2 && col == 3)
|| (row == 1 && col == 4) || (row == 4 && col == 4)
|| (row == 4 && col == 0))
JPanel p = new JPanel(new BorderLayout());
JLabel label;
if (row == 0 && col == 1) {
label = new JLabel("1");
label.setHorizontalAlignment(JLabel.LEFT);
label.setVerticalAlignment(JLabel.TOP);
else if (row == 4 && col == 0) {// for two numbers or
// two
// blank box in on row
label = new JLabel("2");
label.setHorizontalAlignment(JLabel.LEFT);
label.setVerticalAlignment(JLabel.TOP);
else if (row == 1 && col == 4) {
label = new JLabel("3");
label.setHorizontalAlignment(JLabel.LEFT);
label.setVerticalAlignment(JLabel.TOP);
else if (row == 4) {
label = new JLabel("4");
label.setHorizontalAlignment(JLabel.LEFT);
label.setVerticalAlignment(JLabel.TOP);
else {
label = new JLabel("5");
label.setHorizontalAlignment(JLabel.LEFT);
label.setVerticalAlignment(JLabel.TOP);
label.setOpaque(true);
label.setBackground(squares[row][col].getBackground());
label.setPreferredSize(new Dimension(label
.getPreferredSize().width, squares[row][col]
.getPreferredSize().height));
p.setBorder(squares[row][col].getBorder());
squares[row][col].setBorder(null);
p.add(label, BorderLayout.WEST);
p.add(squares[row][col], BorderLayout.CENTER);
xs_and_os.add(p);
} else if ((row == 2 && col == 1) || (row == 1 && col == 2)
|| (row == 3 && col == 3) || (row == 0 && col == 3)) {
xs_and_os.add(squares[row][col]);
// board[ row ][ col ].setEditable(false);
// board[ row ][ col ].setText("");
squares[row][col].setBackground(Color.RED);
squares[row][col].addKeyListener(this);
} else {
squares[row][col] = new JTextField(1);
// squares[row][col].addActionListener(this);
squares[row][col].addKeyListener(this);
xs_and_os.add(squares[row][col]);
this.add(xs_and_os);
this.add(statusLabel);
this.add(lbl_score);
this.add(lbl_scorelocal);
public void keyPressed(KeyEvent e) {
public void keyReleased(KeyEvent e) {
gameKeyReleased(e);
public void keyTyped(KeyEvent e) {
// main
public static void main(String[] args) {
SwingUtilities.invokeLater(new Runnable() {
@Override
public void run() {
new GameMain();
thanks a lot for your time , consideration and efforts.
jibby
Edited by: jibbylala on Sep 20, 2010 6:06 PMjibbylala wrote:
thanks for mentioning as i wasn't able to write complete context here.Yep thanks camickr. I think that Darryl's succinct reply applies here as well. -
Problems with JDesktopPane and JInternalFrame
hello
merry christmas .
I have some strange problem with JDesktopPane .
I have a frame with an splitpane and in right side of splitpane i have a JDesktopPane .
I can easily add InternalFrames to this JDesktopPane but when there is two or more InternalFrame and when I have at least 2 internal frame(they are not minimized or in full screen mode or cover completely each other , just when overlap each other) my cpu usage go to 100% and as soon as i minimize one of them or go to full screen mode or drag out one of them problem resolves .
I have not any extra code that cause this problem(i just overwrite the paint method in internal frames ) .
Can you help me ?
Thanks for your timeDid you override paint() or paintComponent()? Generally you should override paintComponent() for Swing components.
Regards,
Tim -
Problem with htmldb 2 (Sorry APEX)!
I installed htmldb 2 on a windows XP, Oracle 10gR1 (which has enhanced by companion CD downloaded form Oracle's site). Everything went OK but when I want to connect to it by this url: http://localhost:7777/pls/htmldb it takes my username,pass but says:
"Service Temporarily Unavailable
The server is temporarily unable to service your request due to maintenance downtime or capacity problems. Please try again later.
Oracle-HTTP-Server/1.3.28 Server at localhost Port 7777"
I noticed many differences between my installed Apache and documents of htmldb. I run a 9.0.4.0.0 Apache server and the dads.conf and httpd.conf are as following:
# ============================================================================
# mod_plsql DAD Configuration File
# ============================================================================
# 1. Please refer to dads.README for a description of this file
# ============================================================================
# Note: This file should typically be included in your plsql.conf file with
# the "include" directive.
# Hint: You can look at some sample DADs in the dads.README file
# ============================================================================
Alias /i/ "E:\oracle\product\10.1.0\Companion\Apache\Apache\images/"
<Location /pls/htmldb>
SetHandler pls_handler
Order deny,allow
Allow from all
AllowOverride None
PlsqlDatabaseUsername HTMLDB_PUBLIC_USER
PlsqlDatabasePassword @BI+fAonVS+7xU8G04irVINWznM6s+A9fuQ==
PlsqlDatabaseConnectString chagh
PlsqlDefaultPage htmldb
PlsqlDocumentTablename wwv_flow_file_objects$
PlsqlDocumentPath docs
PlsqlDocumentProcedure wwv_flow_file_mgr.process_download
PlsqlAuthenticationMode Basic
PlsqlNLSLanguage AMERICAN_AMERICA.AL32UTF8
</Location>
# Based upon the NCSA server configuration files originally by Rob McCool.
# This is the main Apache server configuration file. It contains the
# configuration directives that give the server its instructions.
# See <URL:http://www.apache.org/docs/> for detailed information about
# the directives.
# Do NOT simply read the instructions in here without understanding
# what they do. They're here only as hints or reminders. If you are unsure
# consult the online docs. You have been warned.
# After this file is processed, the server will look for and process
# E:\oracle\product\10.1.0\Companion\Apache\Apache/conf/srm.conf and then E:\oracle\product\10.1.0\Companion\Apache\Apache/conf/access.conf
# unless you have overridden these with ResourceConfig and/or
# AccessConfig directives here.
# The configuration directives are grouped into three basic sections:
# 1. Directives that control the operation of the Apache server process as a
# whole (the 'global environment').
# 2. Directives that define the parameters of the 'main' or 'default' server,
# which responds to requests that aren't handled by a virtual host.
# These directives also provide default values for the settings
# of all virtual hosts.
# 3. Settings for virtual hosts, which allow Web requests to be sent to
# different IP addresses or hostnames and have them handled by the
# same Apache server process.
# Configuration and logfile names: If the filenames you specify for many
# of the server's control files begin with "/" (or "drive:/" for Win32), the
# server will use that explicit path. If the filenames do not begin
# with "/", the value of ServerRoot is prepended -- so "logs/foo.log"
# with ServerRoot set to "E:\oracle\product\10.1.0\Companion\Apache\Apache" will be interpreted by the
# server as "E:\oracle\product\10.1.0\Companion\Apache\Apache/logs/foo.log".
# NOTE: Where filenames are specified, you must use forward slashes
# instead of backslashes (e.g., "c:/apache" instead of "c:\apache").
# If a drive letter is omitted, the drive on which Apache.exe is located
# will be used by default. It is recommended that you always supply
# an explicit drive letter in absolute paths, however, to avoid
# confusion.
### Section 1: Global Environment
# The directives in this section affect the overall operation of Apache,
# such as the number of concurrent requests it can handle or where it
# can find its configuration files.
# ServerType is either inetd, or standalone. Inetd mode is only supported on
# Unix platforms.
ServerType standalone
# ServerRoot: The top of the directory tree under which the server's
# configuration, error, and log files are kept.
# Do NOT add a slash at the end of the directory path.
ServerRoot "E:\oracle\product\10.1.0\Companion\Apache\Apache"
# PidFile: The file in which the server should record its process
# identification number when it starts.
PidFile logs/httpd.pid
# ScoreBoardFile: File used to store internal server process information.
# Not all architectures require this. But if yours does (you'll know because
# this file will be created when you run Apache) then you must ensure that
# no two invocations of Apache share the same scoreboard file.
ScoreBoardFile logs/httpd.scoreboard
# In the standard configuration, the server will process httpd.conf (this
# file, specified by the -f command line option), srm.conf, and access.conf
# in that order. The latter two files are now distributed empty, as it is
# recommended that all directives be kept in a single file for simplicity.
# The commented-out values below are the built-in defaults. You can have the
# server ignore these files altogether by using "/dev/null" (for Unix) or
# "nul" (for Win32) for the arguments to the directives.
#ResourceConfig conf/srm.conf
#AccessConfig conf/access.conf
# Timeout: The number of seconds before receives and sends time out.
Timeout 300
# SendBufferSize: controls setsockopt() call made to set send buffer size on
# all sockets. Default OS value on most Windows platforms is too small.
# Larger values can help if the average page size served by OHS is
# large (~64 k)
SendBufferSize 16384
# KeepAlive: Whether or not to allow persistent connections (more than
# one request per connection). Set to "Off" to deactivate.
KeepAlive On
# MaxKeepAliveRequests: The maximum number of requests to allow
# during a persistent connection. Set to 0 to allow an unlimited amount.
# We recommend you leave this number high, for maximum performance.
MaxKeepAliveRequests 100
# KeepAliveTimeout: Number of seconds to wait for the next request from the
# same client on the same connection.
KeepAliveTimeout 15
# Apache on Win32 always creates one child process to handle requests. If it
# dies, another child process is created automatically. Within the child
# process multiple threads handle incoming requests. The next two
# directives control the behaviour of the threads and processes.
# MaxRequestsPerChild: the number of requests each child process is
# allowed to process before the child dies. The child will exit so
# as to avoid problems after prolonged use when Apache (and maybe the
# libraries it uses) leak memory or other resources. On most systems, this
# isn't really needed, but a few (such as Solaris) do have notable leaks
# in the libraries. For Win32, set this value to zero (unlimited)
# unless advised otherwise.
# NOTE: This value does not include keepalive requests after the initial
# request per connection. For example, if a child process handles
# an initial request and 10 subsequent "keptalive" requests, it
# would only count as 1 request towards this limit.
MaxRequestsPerChild 0
# Number of concurrent threads (i.e., requests) the server will allow.
# Set this value according to the responsiveness of the server (more
# requests active at once means they're all handled more slowly) and
# the amount of system resources you'll allow the server to consume.
ThreadsPerChild 50
# Server-pool size regulation. Rather than making you guess how many
# server processes you need, Apache dynamically adapts to the load it
# sees --- that is, it tries to maintain enough server processes to
# handle the current load, plus a few spare servers to handle transient
# load spikes (e.g., multiple simultaneous requests from a single
# Netscape browser).
# It does this by periodically checking how many servers are waiting
# for a request. If there are fewer than MinSpareServers, it creates
# a new spare. If there are more than MaxSpareServers, some of the
# spares die off. The default values are probably OK for most sites.
#MinSpareServers 5
#MaxSpareServers 20
# Limit on total number of servers running, i.e., limit on the number
# of clients who can simultaneously connect --- if this limit is ever
# reached, clients will be LOCKED OUT, so it should NOT BE SET TOO LOW.
# It is intended mainly as a brake to keep a runaway server from taking
# the system with it as it spirals down...
#MaxClients 150
# Listen: Allows you to bind Apache to specific IP addresses and/or
# ports, in addition to the default. See also the <VirtualHost>
# directive.
#Listen 3000
#Listen 12.34.56.78:80
# BindAddress: You can support virtual hosts with this option. This directive
# is used to tell the server which IP address to listen to. It can either
# contain "*", an IP address, or a fully qualified Internet domain name.
# See also the <VirtualHost> and Listen directives.
#BindAddress *
# Dynamic Shared Object (DSO) Support
# To be able to use the functionality of a module which was built as a DSO you
# have to place corresponding `LoadModule' lines at this location so the
# directives contained in it are actually available before they are used.
# Please read the file README.DSO in the Apache 1.3 distribution for more
# details about the DSO mechanism and run `apache -l' for the list of already
# built-in (statically linked and thus always available) modules in your Apache
# binary.
# Note: The order in which modules are loaded is important. Don't change
# the order below without expert advice.
# Example:
# LoadModule foo_module libexec/mod_foo.dll
LoadModule mime_magic_module modules/ApacheModuleMimeMagic.dll
LoadModule mime_module modules/ApacheModuleMime.dll
LoadModule dbm_auth_module modules/ApacheModuleAuthDBM.dll
LoadModule digest_auth_module modules/ApacheModuleAuthDigest.dll
LoadModule anon_auth_module modules/ApacheModuleAuthAnon.dll
LoadModule cern_meta_module modules/ApacheModuleCERNMeta.dll
LoadModule digest_module modules/ApacheModuleDigest.dll
LoadModule expires_module modules/ApacheModuleExpires.dll
LoadModule headers_module modules/ApacheModuleHeaders.dll
LoadModule proxy_module modules/ApacheModuleProxy.dll
LoadModule speling_module modules/ApacheModuleSpeling.dll
LoadModule status_module modules/ApacheModuleStatus.dll
LoadModule info_module modules/ApacheModuleInfo.dll
LoadModule usertrack_module modules/ApacheModuleUserTrack.dll
LoadModule vhost_alias_module modules/ApacheModuleVhostAlias.dll
LoadModule agent_log_module modules/ApacheModuleLogAgent.dll
LoadModule referer_log_module modules/ApacheModuleLogReferer.dll
LoadModule perl_module modules/ApacheModulePerl.DLL
LoadModule fastcgi_module modules/ApacheModuleFastCGI.dll
LoadModule onsint_module modules/ApacheModuleOnsint.dll
LoadModule wchandshake_module modules/ApacheModuleWchandshake.dll
ClearModuleList
AddModule mod_so.c
AddModule mod_onsint.c
AddModule mod_mime_magic.c
AddModule mod_mime.c
AddModule mod_access.c
AddModule mod_auth.c
AddModule mod_negotiation.c
AddModule mod_include.c
AddModule mod_autoindex.c
AddModule mod_dir.c
AddModule mod_cgi.c
AddModule mod_userdir.c
AddModule mod_alias.c
AddModule mod_env.c
AddModule mod_log_config.c
AddModule mod_asis.c
AddModule mod_imap.c
AddModule mod_actions.c
AddModule mod_setenvif.c
AddModule mod_isapi.c
AddModule mod_vhost_alias.c
AddModule mod_log_referer.c
AddModule mod_log_agent.c
AddModule mod_auth_anon.c
AddModule mod_auth_dbm.c
AddModule mod_auth_digest.c
AddModule mod_cern_meta.c
AddModule mod_digest.c
AddModule mod_expires.c
AddModule mod_headers.c
AddModule mod_proxy.c
AddModule mod_speling.c
AddModule mod_info.c
AddModule mod_status.c
AddModule mod_usertrack.c
AddModule mod_perl.c
AddModule mod_fastcgi.c
AddModule mod_wchandshake.c
<IfDefine SSL>
LoadModule ossl_module modules/ApacheModuleOSSL.DLL
</IfDefine>
# ExtendedStatus controls whether Apache will generate "full" status
# information (ExtendedStatus On) or just basic information (ExtendedStatus
# Off) when the "server-status" handler is called. The default is Off.
ExtendedStatus On
### Section 2: 'Main' server configuration
# The directives in this section set up the values used by the 'main'
# server, which responds to any requests that aren't handled by a
# <VirtualHost> definition. These values also provide defaults for
# any <VirtualHost> containers you may define later in the file.
# All of these directives may appear inside <VirtualHost> containers,
# in which case these default settings will be overridden for the
# virtual host being defined.
# Port: The port to which the standalone server listens. Certain firewall
# products must be configured before Apache can listen to a specific port.
# Other running httpd servers will also interfere with this port. Disable
# all firewall, security, and other services if you encounter problems.
# To help diagnose problems use the Windows NT command NETSTAT -a
Port 7777
Listen 7777
# ServerAdmin: Your address, where problems with the server should be
# e-mailed. This address appears on some server-generated pages, such
# as error documents.
ServerAdmin [email protected]
# ServerName allows you to set a host name which is sent back to clients for
# your server if it's different than the one the program would get (i.e., use
# "www" instead of the host's real name).
# Note: You cannot just invent host names and hope they work. The name you
# define here must be a valid DNS name for your host. If you don't understand
# this, ask your network administrator.
# If your host doesn't have a registered DNS name, enter its IP address here.
# You will have to access it by its address (e.g., http://123.45.67.89/)
# anyway, and this will make redirections work in a sensible way.
# 127.0.0.1 is the TCP/IP local loop-back address, often named localhost. Your
# machine always knows itself by this address. If you use Apache strictly for
# local testing and development, you may use 127.0.0.1 as the server name.
ServerName localhost
# DocumentRoot: The directory out of which you will serve your
# documents. By default, all requests are taken from this directory, but
# symbolic links and aliases may be used to point to other locations.
DocumentRoot "E:\oracle\product\10.1.0\Companion\Apache\Apache\htdocs"
# Each directory to which Apache has access, can be configured with respect
# to which services and features are allowed and/or disabled in that
# directory (and its subdirectories).
# First, we configure the "default" to be a very restrictive set of
# permissions.
<Directory />
Options FollowSymLinks
AllowOverride None
</Directory>
# Note that from this point forward you must specifically allow
# particular features to be enabled - so if something's not working as
# you might expect, make sure that you have specifically enabled it
# below.
# This should be changed to whatever you set DocumentRoot to.
<Directory "E:\oracle\product\10.1.0\Companion\Apache\Apache\htdocs">
# This may also be "None", "All", or any combination of "Indexes",
# "Includes", "FollowSymLinks", "ExecCGI", or "MultiViews".
# Note that "MultiViews" must be named explicitly --- "Options All"
# doesn't give it to you.
Options Indexes FollowSymLinks MultiViews
# This controls which options the .htaccess files in directories can
# override. Can also be "All", or any combination of "Options", "FileInfo",
# "AuthConfig", and "Limit"
AllowOverride None
# Controls who can get stuff from this server.
Order allow,deny
Allow from all
</Directory>
# UserDir: The name of the directory which is appended onto a user's home
# directory if a ~user request is received.
# Under Win32, we do not currently try to determine the home directory of
# a Windows login, so a format such as that below needs to be used. See
# the UserDir documentation for details.
<IfModule mod_userdir.c>
UserDir "E:\oracle\product\10.1.0\Companion\Apache\Apache\users\"
</IfModule>
# Control access to UserDir directories. The following is an example
# for a site where these directories are restricted to read-only.
#<Directory /home/*/public_html>
# AllowOverride FileInfo AuthConfig Limit
# Options MultiViews Indexes SymLinksIfOwnerMatch IncludesNoExec
# <Limit GET POST OPTIONS PROPFIND>
# Order allow,deny
# Allow from all
# </Limit>
# <LimitExcept GET POST OPTIONS PROPFIND>
# Order deny,allow
# Deny from all
# </LimitExcept>
#</Directory>
# DirectoryIndex: Name of the file or files to use as a pre-written HTML
# directory index. Separate multiple entries with spaces.
<IfModule mod_dir.c>
DirectoryIndex index.html
</IfModule>
# AccessFileName: The name of the file to look for in each directory
# for access control information.
AccessFileName .htaccess
# The following lines prevent .htaccess files from being viewed by
# Web clients. Since .htaccess files often contain authorization
# information, access is disallowed for security reasons. Comment
# these lines out if you want Web visitors to see the contents of
# .htaccess files. If you change the AccessFileName directive above,
# be sure to make the corresponding changes here.
# Also, folks tend to use names such as .htpasswd for password
# files, so this will protect those as well.
<Files ~ "^\.ht">
Order allow,deny
Deny from all
</Files>
# CacheNegotiatedDocs: By default, Apache sends "Pragma: no-cache" with each
# document that was negotiated on the basis of content. This asks proxy
# servers not to cache the document. Uncommenting the following line disables
# this behavior, and proxies will be allowed to cache the documents.
#CacheNegotiatedDocs
# UseCanonicalName: (new for 1.3) With this setting turned on, whenever
# Apache needs to construct a self-referencing URL (a URL that refers back
# to the server the response is coming from) it will use ServerName and
# Port to form a "canonical" name. With this setting off, Apache will
# use the hostname:port that the client supplied, when possible. This
# also affects SERVER_NAME and SERVER_PORT in CGI scripts.
UseCanonicalName On
# TypesConfig describes where the mime.types file (or equivalent) is
# to be found.
<IfModule mod_mime.c>
TypesConfig conf/mime.types
</IfModule>
# DefaultType is the default MIME type the server will use for a document
# if it cannot otherwise determine one, such as from filename extensions.
# If your server contains mostly text or HTML documents, "text/plain" is
# a good value. If most of your content is binary, such as applications
# or images, you may want to use "application/octet-stream" instead to
# keep browsers from trying to display binary files as though they are
# text.
DefaultType text/plain
# The mod_mime_magic module allows the server to use various hints from the
# contents of the file itself to determine its type. The MIMEMagicFile
# directive tells the module where the hint definitions are located.
# mod_mime_magic is not part of the default server (you have to add
# it yourself with a LoadModule [see the DSO paragraph in the 'Global
# Environment' section], or recompile the server and include mod_mime_magic
# as part of the configuration), so it's enclosed in an <IfModule> container.
# This means that the MIMEMagicFile directive will only be processed if the
# module is part of the server.
<IfModule mod_mime_magic.c>
MIMEMagicFile conf/magic
</IfModule>
# HostnameLookups: Log the names of clients or just their IP addresses
# e.g., www.apache.org (on) or 204.62.129.132 (off).
# The default is off because it'd be overall better for the net if people
# had to knowingly turn this feature on, since enabling it means that
# each client request will result in AT LEAST one lookup request to the
# nameserver.
HostnameLookups Off
# ErrorLog: The location of the error log file.
# If you do not specify an ErrorLog directive within a <VirtualHost>
# container, error messages relating to that virtual host will be
# logged here. If you do define an error logfile for a <VirtualHost>
# container, that host's errors will be logged there and not here.
ErrorLog "|E:\oracle\product\10.1.0\Companion\Apache\Apache\bin\rotatelogs logs/error_log 43200"
# LogLevel: Control the number of messages logged to the error.log.
# Possible values include: debug, info, notice, warn, error, crit,
# alert, emerg.
LogLevel warn
# The following directives define some format nicknames for use with
# a CustomLog directive (see below).
# Alternate "common" format to use when fronted by webcache:
# LogFormat "%{ClientIP}i %l %u %t \"%r\" %>s %b %h" common_webcache
# When webcache is forwarding requests to OHS, %h becomes the IP of
# the originating webcache server and the real client IP is stored
# in the ClientIP header. The common_webcache format can be used
# in place of the common format when using webcache but with one
# important caveat: if clients are capable of bypassing webcache
# then it is possible to spoof the client IP by manually setting
# the ClientIP header so the %h field should be monitored in such
# an environment. Another alternative to specifying the ClientIP
# header directly in a LogFormat is to use the "UseWebCacheIp"
# directive:
# UseWebCacheIp On
# When this is specified, %h is derived internally from the ClientIP
# header and the access log format does not need to be modified.
LogFormat "%h %l %u %t \"%r\" %>s %b \"%{Referer}i\" \"%{User-Agent}i\"" combined
LogFormat "%h %l %u %t \"%r\" %>s %b" common
LogFormat "%{Referer}i -> %U" referer
LogFormat "%{User-agent}i" agent
# The location and format of the access logfile (Common Logfile Format).
# If you do not define any access logfiles within a <VirtualHost>
# container, they will be logged here. Contrariwise, if you do
# define per-<VirtualHost> access logfiles, transactions will be
# logged therein and not in this file.
CustomLog "|E:\oracle\product\10.1.0\Companion\Apache\Apache\bin\rotatelogs logs/access_log 43200" common
# If you would like to have agent and referer logfiles, uncomment the
# following directives.
#CustomLog logs/referer.log referer
#CustomLog logs/agent.log agent
# If you prefer a single logfile with access, agent, and referer information
# (Combined Logfile Format) you can use the following directive.
#CustomLog logs/access.log combined
# Optionally add a line containing the server version and virtual host
# name to server-generated pages (error documents, FTP directory listings,
# mod_status and mod_info output etc., but not CGI generated documents).
# Set to "EMail" to also include a mailto: link to the ServerAdmin.
# Set to one of: On | Off | EMail
ServerSignature On
# Apache parses all CGI scripts for the shebang line by default.
# This comment line, the first line of the script, consists of the symbols
# pound (#) and exclamation (!) followed by the path of the program that
# can execute this specific script. For a perl script, with perl.exe in
# the C:\Program Files\Perl directory, the shebang line should be:
#!c:/program files/perl/perl
# Note you mustnot_ indent the actual shebang line, and it must be the
# first line of the file. Of course, CGI processing must be enabled by
# the appropriate ScriptAlias or Options ExecCGI directives for the files
# or directory in question.
# However, Apache on Windows allows either the Unix behavior above, or can
# use the Registry to match files by extention. The command to execute
# a file of this type is retrieved from the registry by the same method as
# the Windows Explorer would use to handle double-clicking on a file.
# These script actions can be configured from the Windows Explorer View menu,
# 'Folder Options', and reviewing the 'File Types' tab. Clicking the Edit
# button allows you to modify the Actions, of which Apache 1.3 attempts to
# perform the 'Open' Action, and failing that it will try the shebang line.
# This behavior is subject to change in Apache release 2.0.
# Each mechanism has it's own specific security weaknesses, from the means
# to run a program you didn't intend the website owner to invoke, and the
# best method is a matter of great debate.
# To enable the this Windows specific behavior (and therefore -disable- the
# equivilant Unix behavior), uncomment the following directive:
#ScriptInterpreterSource registry
# The directive above can be placed in individual <Directory> blocks or the
# .htaccess file, with either the 'registry' (Windows behavior) or 'script'
# (Unix behavior) option, and will override this server default option.
# Aliases: Add here as many aliases as you need (with no limit). The format is
# Alias fakename realname
<IfModule mod_alias.c>
# Note that if you include a trailing / on fakename then the server will
# require it to be present in the URL. So "/icons" isn't aliased in this
# example, only "/icons/"..
Alias /jservdocs/ "E:\oracle\product\10.1.0\Companion\Apache\Jserv\docs/"
Alias /javacachedocs/ "E:\oracle\product\10.1.0\Companion\javacache\javadoc/"
Alias /icons/ "E:\oracle\product\10.1.0\Companion\Apache\Apache\icons/"
Alias /i/ "E:\oracle\product\10.1.0\Companion\Apache\Apache\images/"
<Directory "icons">
Options Indexes MultiViews
AllowOverride None
Order allow,deny
Allow from all
</Directory>
<IfModule mod_perl.c>
Alias /perl/ "E:\oracle\product\10.1.0\Companion\Apache\Apache/cgi-bin/"
</IfModule>
# ScriptAlias: This controls which directories contain server scripts.
# ScriptAliases are essentially the same as Aliases, except that
# documents in the realname directory are treated as applications and
# run by the server when requested rather than as documents sent to the client.
# The same rules about trailing "/" apply to ScriptAlias directives as to
# Alias.
ScriptAlias /cgi-bin/ "E:\oracle\product\10.1.0\Companion\Apache\Apache\cgi-bin/"
# "E:\oracle\product\10.1.0\Companion\Apache\Apache/cgi-bin" should be changed to whatever your ScriptAliased
# CGI directory exists, if you have that configured.
<Directory "E:\oracle\product\10.1.0\Companion\Apache\Apache\cgi-bin">
AllowOverride None
Options None
Order allow,deny
Allow from all
</Directory>
</IfModule>
# End of aliases.
# Redirect allows you to tell clients about documents which used to exist in
# your server's namespace, but do not anymore. This allows you to tell the
# clients where to look for the relocated document.
# Format: Redirect old-URI new-URL
# Directives controlling the display of server-generated directory listings.
<IfModule mod_autoindex.c>
# FancyIndexing is whether you want fancy directory indexing or standard
# Note, add the option TrackModified to the IndexOptions default list only
# if all indexed directories reside on NTFS volumes. The TrackModified flag
# will report the Last-Modified date to assist caches and proxies to properly
# track directory changes, but it does not work on FAT volumes.
IndexOptions FancyIndexing
# AddIcon* directives tell the server which icon to show for different
# files or filename extensions. These are only displayed for
# FancyIndexed directories.
AddIconByEncoding (CMP,/icons/compressed.gif) x-compress x-gzip
AddIconByType (TXT,/icons/text.gif) text/*
AddIconByType (IMG,/icons/image2.gif) image/*
AddIconByType (SND,/icons/sound2.gif) audio/*
AddIconByType (VID,/icons/movie.gif) video/*
AddIcon /icons/binary.gif .bin .exe
AddIcon /icons/binhex.gif .hqx
AddIcon /icons/tar.gif .tar
AddIcon /icons/world2.gif .wrl .wrl.gz .vrml .vrm .iv
AddIcon /icons/compressed.gif .Z .z .tgz .gz .zip
AddIcon /icons/a.gif .ps .ai .eps
AddIcon /icons/layout.gif .html .shtml .htm .pdf
AddIcon /icons/text.gif .txt
AddIcon /icons/c.gif .c
AddIcon /icons/p.gif .pl .py
AddIcon /icons/f.gif .for
AddIcon /icons/dvi.gif .dvi
AddIcon /icons/uuencoded.gif .uu
AddIcon /icons/script.gif .conf .sh .shar .csh .ksh .tcl
AddIcon /icons/tex.gif .tex
AddIcon /icons/bomb.gif core
AddIcon /icons/back.gif ..
AddIcon /icons/hand.right.gif README
AddIcon /icons/folder.gif ^^DIRECTORY^^
AddIcon /icons/blank.gif ^^BLANKICON^^
# DefaultIcon is which icon to show for files which do not have an icon
# explicitly set.
DefaultIcon /icons/unknown.gif
# AddDescription allows you to place a short description after a file in
# server-generated indexes. These are only displayed for FancyIndexed
# directories.
# Format: AddDescription "description" filename
#AddDescription "GZIP compressed document" .gz
#AddDescription "tar archive" .tar
#AddDescription "GZIP compressed tar archive" .tgz
# ReadmeName is the name of the README file the server will look for by
# default, and append to directory listings.
# HeaderName is the name of a file which should be prepended to
# directory indexes.
# If MultiViews are amongst the Options in effect, the server will
# first look for name.html and include it if found. If name.html
# doesn't exist, the server will then look for name.txt and include
# it as plaintext if found.
ReadmeName README
HeaderName HEADER
# IndexIgnore is a set of filenames which directory indexing should ignore
# and not include in the listing. Shell-style wildcarding is permitted.
IndexIgnore .??* *~ *# HEADER* README* RCS CVS *,v *,t
</IfModule>
# End of indexing directives.
# Document types.
<IfModule mod_mime.c>
# AddEncoding allows you to have certain browsers (Mosaic/X 2.1+) uncompress
# information on the fly. Note: Not all browsers support this.
# Despite the name similarity, the following Add* directives have nothing
# to do with the FancyIndexing customization directives above.
AddEncoding x-compress Z
AddEncoding x-gzip gz tgz
# AddLanguage allows you to specify the language of a document. You can
# then use content negotiation to give a browser a file in a language
# it can understand.
# Note 1: The suffix does not have to be the same as the language
# keyword --- those with documents in Polish (whose net-standard
# language code is pl) may wish to use "AddLanguage pl .po" to
# avoid the ambiguity with the common suffix for perl scripts.
# Note 2: The example entries below illustrate that in quite
# some cases the two character 'Language' abbriviation is not
# identical to the two character 'Country' code for its country,
# E.g. 'Danmark/dk' versus 'Danish/da'.
# Note 3: In the case of 'ltz' we violate the RFC by using a three char
# specifier. But there is 'work in progress' to fix this and get
# the reference data for rfc1766 cleaned up.
# Danish (da) - Dutch (nl) - English (en) - Estonian (ee)
# French (fr) - German (de) - Greek-Modern (el)
# Italian (it) - Korean (kr) - Norwegian (no)
# Portugese (pt) - Luxembourgeois* (ltz)
# Spanish (es) - Swedish (sv) - Catalan (ca) - Czech(cz)
# Polish (pl) - Brazilian Portuguese (pt-br) - Japanese (ja)
# Russian (ru)
AddLanguage ar .ar
AddLanguage da .dk .da
AddLanguage nl .nl
AddLanguage en .en
AddLanguage et .ee
AddLanguage fi .fi
AddLanguage fr .fr
AddLanguage de .de
AddLanguage el .el
AddLanguage es .es_ES .es
AddLanguage he .he .iw
AddLanguage hu .hu
AddCharset ISO-8859-8 .iso8859-8
AddLanguage it .it
AddLanguage ja .ja
AddCharset ISO-2022-JP .jis
AddLanguage ko .ko
AddLanguage kr .kr
AddCharset ISO-2022-KR .iso-kr
AddLanguage nn .nn
AddLanguage no .no
AddLanguage pl .po
AddCharset ISO-8859-2 .iso-pl
AddLanguage pt .pt
AddLanguage pt-br .pt_BR .pt-br
AddLanguage ltz .lu
AddLanguage ca .ca
AddLanguage sk .sk
AddLanguage sv .sv
AddLanguage th .th
AddLanguage tr .tr
AddLanguage cz .cz .cs
AddLanguage ro .ro
AddLanguage ru .ru
AddLanguage zh-cn .zh_CN
AddLanguage zh-tw .zh_TW
AddCharset Big5 .Big5 .big5
AddCharset WINDOWS-1251 .cp-1251
AddCharset CP866 .cp866
AddCharset ISO-8859-5 .iso-ru
AddCharset KOI8-R .koi8-r
AddCharset UCS-2 .ucs2
AddCharset UCS-4 .ucs4
AddCharset UTF-8 .utf8
# LanguagePriority allows you to give precedence to some languages
# in case of a tie during content negotiation.
# Just list the languages in decreasing order of preference. We have
# more or less alphabetized them here. You probably want to change this.
<IfModule mod_negotiation.c>
LanguagePriority ar en da nl et fi fr de el it ja ko kr no pl pt pt-br ro ru ltz ca es sk sv th tr zh-cn zh-tw zh-cn
</IfModule>
# AddType allows you to tweak mime.types without actually editing it, or to
# make certain files to be certain types.
# For example, the PHP 3.x module (not part of the Apache distribution - see
# http://www.php.net) will typically use:
#AddType application/x-httpd-php3 .php3
#AddType application/x-httpd-php3-source .phps
# And for PHP 4.x, use:
#AddType application/x-httpd-php .php
#AddType application/x-httpd-php-source .phps
AddType application/x-tar .tgz
# AddHandler allows you to map certain file extensions to "handlers",
# actions unrelated to filetype. These can be either built into the server
# or added with the Action command (see below)
# If you want to use server side includes, or CGI outside
# ScriptAliased directories, uncomment the following lines.
# To use CGI scripts:
#AddHandler cgi-script .cgi
# To use server-parsed HTML files
#AddType text/html .shtml
#AddHandler server-parsed .shtml
AddType text/xml xbl
AddType text/x-component htc
# Uncomment the following line to enable Apache's send-asis HTTP file
# feature
#AddHandler send-as-is asis
# If you wish to use server-parsed imagemap files, use
#AddHandler imap-file map
# To enable type maps, you might want to use
#AddHandler type-map var
</IfModule>
# End of document types.
# Action lets you define media types that will execute a script whenever
# a matching file is called. This eliminates the need for repeated URL
# pathnames for oft-used CGI file processors.
# Format: Action media/type /cgi-script/location
# Format: Action handler-name /cgi-script/location
# MetaDir: specifies the name of the directory in which Apache can find
# meta information files. These files contain additional HTTP headers
# to include when sending the document
#MetaDir .web
# MetaSuffix: specifies the file name suffix for the file containing the
# meta information.
#MetaSuffix .meta
# Customizable error response (Apache style)
# these come in three flavors
# 1) plain text
#ErrorDocument 500 "The server made a boo boo.
# n.b. the single leading (") marks it as text, it does not get output
# 2) local redirects
#ErrorDocument 404 /missing.html
# to redirect to local URL /missing.html
#ErrorDocument 404 /cgi-bin/missing_handler.pl
# N.B.: You can redirect to a script or a document using server-side-includes.
# 3) external redirects
#ErrorDocument 402 http://some.other_server.com/subscription_info.html
# N.B.: Many of the environment variables associated with the original
# request will not be available to such a script.
# Customize behaviour based on the browser
<IfModule mod_setenvif.c>
# The following directives modify normal HTTP response behavior.
# The first directive disables keepalive for Netscape 2.x and browsers that
# spoof it. There are known problems with these browser implementations.
# The second directive is for Microsoft Internet Explorer 4.0b2
# which has a broken HTTP/1.1 implementation and does not properly
# support keepalive when it is used on 301 or 302 (redirect) responses.
BrowserMatch "Mozilla/2" nokeepalive
BrowserMatch "MSIE 4\.0b2;" nokeepalive downgrade-1.0 force-response-1.0
# The following directive disables HTTP/1.1 responses to browsers which
# are in violation of the HTTP/1.0 spec by not being able to grok a
# basic 1.1 response.
BrowserMatch "RealPlayer 4\.0" force-response-1.0
BrowserMatch "Java/1\.0" force-response-1.0
BrowserMatch "JDK/1\.0" force-response-1.0
</IfModule>
# End of browser customization directives
# Allow server status reports, with the URL of http://servername/server-status
# Change the ".your_domain.com" to match your domain to enable.
<Location /server-status>
SetHandler server-status
Order deny,allow
Deny from all
Allow from localhost localhost localhost
</Location>
# Allow remote server configuration reports, with the URL of
# http://servername/server-info (requires that mod_info.c be loaded).
# Change the ".your_domain.com" to match your domain to enable.
#<Location /server-info>
# SetHandler server-info
# Order deny,allow
# Deny from all
# Allow from .your_domain.com
#</Location>
# There have been reports of people trying to abuse an old bug from pre-1.1
# days. This bug involved a CGI script distributed as a part of Apache.
# By uncommenting these lines you can redirect these attacks to a logging
# script on phf.apache.org. Or, you can record them yourself, using the script
# support/phf_abuse_log.cgi.
#<Location /cgi-bin/phf*>
# Deny from all
# ErrorDocument 403 http://phf.apache.org/phf_abuse_log.cgi
#</Location>
# Proxy Server directives. Uncomment the following lines to
# enable the proxy server:
#<IfModule mod_proxy.c>
# ProxyRequests On
# <Directory proxy:*>
# Order deny,allow
# Deny from all
# Allow from .your_domain.com
# </Directory>
# Enable/disable the handling of HTTP/1.1 "Via:" headers.
# ("Full" adds the server version; "Block" removes all outgoing Via: headers)
# Set to one of: Off | On | Full | Block
# ProxyVia On
# To enable the cache as well, edit and uncomment the following lines:
# (no cacheing without CacheRoot)
# CacheRoot "E:\oracle\product\10.1.0\Companion\Apache\Apache\proxy"
# CacheSize 5
# CacheGcInterval 4
# CacheMaxExpire 24
# CacheLastModifiedFactor 0.1
# CacheDefaultExpire 1
# NoCache a_domain.com another_domain.edu joes.garage_sale.com
#</IfModule>
# End of proxy directives.
### Section 3: Virtual Hosts
# VirtualHost: If you want to maintain multiple domains/hostnames on your
# machine you can setup VirtualHost containers for them. Most configurations
# use only name-based virtual hosts so the server doesn't need to worry about
# IP addresses. This is indicated by the asterisks in the directives below.
# Please see the documentation at <URL:http://www.apache.org/docs/vhosts/>
# for further details before you try to setup virtual hosts.
# You may use the command line option '-S' to verify your virtual host
# configuration.
# Use name-based virtual hosting.
#NameVirtualHost *
#NameVirtualHost 12.34.56.78:80
#NameVirtualHost 12.34.56.78
# VirtualHost example:
# Almost any Apache directive may go into a VirtualHost container.
# The first VirtualHost section is used for requests without a known
# server name.
#<VirtualHost *>
# ServerAdmin [email protected]
# DocumentRoot /www/docs/dummy-host.example.com
# ServerName dummy-host.example.com
# ErrorLog logs/dummy-host.example.com-error_log
# CustomLog logs/dummy-host.example.com-access_log common
#</VirtualHost>
#<VirtualHost default:*>
#</VirtualHost>
SetEnv PERL5LIB "E:\oracle\product\10.1.0\Companion\perl\5.6.1\lib:E:\oracle\product\10.1.0\Companion\perl\site\5.6.1\lib"
<IfModule mod_perl.c>
# Perl Directives
# PerlWarn On
# PerlFreshRestart On
# PerlSetEnv PERL5OPT Tw
# PerlSetEnv PERL5LIB "E:\oracle\product\10.1.0\Companion\perl\5.6.1\lib:E:\oracle\product\10.1.0\Companion\perl\site\5.6.1\lib"
PerlModule Apache
# PerlModule Apache::Status
PerlModule Apache::Registry
# PerlModule Apache::CGI
# PerlModule Apache::DBI
# PerlRequire
<Location /perl>
SetHandler perl-script
PerlHandler Apache::Registry
AddHandler perl-script .pl
Options +ExecCGI
PerlSendHeader On
</Location>
# <Location /perl-status>
# SetHandler perl-script
# PerlHandler Apache::Status
# order deny,allow
# deny from all
# allow from localhost
# </Location>
</IfModule>
#Protect WEB-INF directory
<DirectoryMatch /WEB-INF/>
Order deny,allow
Deny from all
</DirectoryMatch>
# Setup of FastCGI module
<IfModule mod_fastcgi.c>
Alias /fastcgi/ "E:\oracle\product\10.1.0\Companion\Apache\fastcgi/"
ScriptAlias /fcgi-bin/ "E:\oracle\product\10.1.0\Companion\Apache\Apache\fcgi-bin/"
<Directory "E:\oracle\product\10.1.0\Companion\Apache\Apache\fcgi-bin">
AllowOverride None
Options None
Order allow,deny
Allow from all
SetHandler fastcgi-script
<IfModule mod_ossl.c>
SSLOptions +StdEnvVars
</IfModule>
</Directory>
</IfModule>
# Include the configuration for Apache JServ 1.1
#include "E:\oracle\product\10.1.0\Companion\Apache\Jserv\conf\jserv.conf"
# Setup of oprocmgr module.
# This directive identifies each remote apache instance that will be
# sending requests to processes (e.g., JServs), managed by local Apache
# instances. This directive is used by the local process manager to share
# routing information with remote apache instances via non-SSL HTTP messages.
# The directive is repeated for each remote apache instance that will be
# sending requests. The ProcNode directive that refers to the local apache
# instance will be ignored, but may be supplied to facilitate uniformity
# in configuration across apache instances. Arguments to the ProcNode must
# be sufficient to reach the remote instance of apache via non-SSL HTTP
# messages. It is not considered an error if the remote apache instance is
# unreachable, as no assumption is made about the starting order or
# availability of apache instances.
# Syntax: ProcNode <hostname> <port>
# Example: ProcNode abc.com 7777
<IfModule mod_oprocmgr.c>
<Location /oprocmgr-service>
SetHandler oprocmgr-service
Order deny,allow
Deny from all
Allow from localhost localhost localhost
</Location>
<Location /oprocmgr-status>
SetHandler oprocmgr-status
Order deny,allow
Deny from all
Allow from localhost localhost localhost
</Location>
</IfModule>
# Include the mod_oc4j configuration file
include "E:\oracle\product\10.1.0\Companion\Apache\Apache\conf\mod_oc4j.conf"
# Include the mod_dms configuration file
include "E:\oracle\product\10.1.0\Companion\Apache\Apache\conf\dms.conf"
# Loading rewrite_module here so it loads before mod_oc4j
LoadModule rewrite_module modules/ApacheModuleRewrite.dll
# Include the SSL definitions and Virtual Host container
include "E:\oracle\product\10.1.0\Companion\Apache\Apache\conf\ssl.conf"
# Include the mod_osso configuration file
#include "E:\oracle\product\10.1.0\Companion\Apache\Apache\conf\mod_osso.conf"
# Include the Oracle configuration file for custom settings
include "E:\oracle\product\10.1.0\Companion\Apache\Apache\conf\oracle_apache.conf"
------------------------------------------------------------------------------------------------------------------Firstly, there's no such thing as Apache 9.3, there's Apache 1 (and subversions) and Apache 2 (and subversions). Your error message -
Oracle-HTTP-Server/1.3.28Shows you're using Apache 1.3.28
Secondly, I'm confused by your comment -
I do not have Apache 9.3 or higher but I think oracle should offer this in its companion CDOracle does offer the Apache server, if you're saying you didn't get it from Oracle then where did your Apache server come from?
Thirdly, I notice from your config file -
ErrorLog "|E:\oracle\product\10.1.0\Companion\Apache\Apache\bin\rotatelogs logs/error_log 43200"That you're piping the logs through rotatelogs, are you sure the logfiles haven't just been renamed? -
Problem with Drag and Drop (TransferHandler)
I have a stern problem with the java.swing.TransferHandler. It shows a design weakness, and because of a tiny glitch I am currently not able to finish my task.
The design weakness is that method importData(JComponent comp, Transferable t) does not pass the dropAction information in the parameter list. The application case in question is a transfer from a JTree to a JTree (might likewise be to/from a JList). The transfer semantics imply that partial success is possible (there are item identity and uniqueness considerations to handle). - I can deal with all detail demands except that I cannot discriminate between COPY and MOVE taking place in the transfer. Also I don't find any possibility to retrieve this information by subclassing TranferHandler or from any other element there.
Is there any expert who knows a solution?I came up with two solutions. One is I modified my application requirements for the time being so the problem disappears. :)
Second, I had the idea to create a subclass of javax.swing.TransferHandler and copy/override as many methods as necessary to allow for an extra method public boolean importData(JComponent comp, Transferable t, int action) and derive the extra value from a modified method DropHandler.drop(DropTargetDropEvent e) in a copy of the DropHandler.
Whether this really works, I have not tested.
As for your answer, Andre_Uhres, I don't find it elaborate enough that it leads to a solution, hence no stars rewarded. You leave it open how to get hold of the DropTarget events which are dealt with privately in javax.swing.TransferHandler.
I consider the subject closed for my purposes. Thanks very much for your reply! -
Problem With ObjectSream and GUI
Hi
I had a problem with the sendBtn ActionListener. When i press the send button the application freeze and the button freeze pressed.
But when i put some code to do the same think that send button should do, into the main method everything works fine. Any help?
Thanks in advanced and sorry for my english
//Some imports
public class SampleCommunicationAgentGUI extends BaseCommunicationAgent {
public SampleCommunicationAgentGUI(String name) {
super(name);
try {
connectToACS("127.0.0.1", 3333);
} catch (IOException e) {
System.out.print("\nNetwork error while connecting to ACS ("
+ e.getMessage() + ")");
} catch (ClassNotFoundException e) {
System.out.print("\nNetwork error while connecting to ACS ("
+ e.getMessage() + ")");
frame = new SampleAgentFrame(name);
frame.sendBtn.addActionListener(new java.awt.event.ActionListener() {
public void actionPerformed(java.awt.event.ActionEvent evt) {
KQML message = new KQML();
message.setSender(getName());
message.setReceiver(frame.receiverField.getText());
message.setContent(frame.contentField.getText());
message.setInReplyTo(frame.inReplyToField.getText());
message.setLanguage(frame.languageField.getText());
message.setOntology(frame.ontologyField.getText());
message.setPerformative(frame.perfomativeField.getText());
message.setReplyWith(frame.inReplayWithField.getText());
System.out.println(message.getTotalMsg());
try {
sendMessage(message); // A method of BaseCommunicationAgent
} catch (Exception e) {
e.printStackTrace();
frame.setDefaultCloseOperation(JFrame.EXIT_ON_CLOSE);
frame.validate();
frame.setLocationRelativeTo(null);
frame.setVisible(true);
public static SampleAgentFrame frame;
public static void main(String[] args) {
KQML message;
SampleCommunicationAgentGUI agent = new SampleCommunicationAgentGUI("Chris");
if (!agent.getACSStatus().equals(ACSStatus.CONNECTED)) {
System.out.println("\nERROR: Could not connect on ACS!");
return;
/*If i put this code here everything works fine
* message = new KQML();
* agent.sendMessage(message);
while (true) {
message = agent.getMessage();
frame.messageTextArea.append(message.getContent() + "\r\n");
protected static class SampleAgentFrame extends JFrame {
//Some variables
public SampleAgentFrame(String name) {
setTitle(name);
initComponents(name);
* Initializes the GUI.
private void initComponents(String name) {
//Inits the GUI but is to big to post it.
}And the BaseCommunicationAgent
//Some imports
public class BaseCommunicationAgent extends BaseAgent {
public static enum ACSStatus {
INITIALIZING, INITIALIZED, CONNECTING, CONNECTED
private Socket socketACS;
private ObjectOutputStream dataOut;
private ObjectInputStream dataIn;
protected ACSStatus statusACS;
private KQML kqmlMessage;
public BaseCommunicationAgent(String name) {
super(name);
statusACS = ACSStatus.INITIALIZING;
socket = null;
dataOut = null;
dataOut = null;
kqmlMessage = null;
statusACS = ACSStatus.INITIALIZED;
protected synchronized boolean connectToACS(String address, int port)
throws IOException, ClassNotFoundException {
try {
statusACS = ACSStatus.CONNECTING;
socketACS = new Socket(address, port);
dataOut = new ObjectOutputStream(socketACS.getOutputStream());
dataIn = new ObjectInputStream(socketACS.getInputStream());
kqmlMessage = new KQML();
KQML message;
boolean isComment;
do {
message = (KQML) dataIn.readObject();
isComment = message.getPerformative().equals("comment");
if (isComment) {
System.out.println(message.getContent());
} while (isComment);
if (message.getPerformative().equals("identify")) {
kqmlMessage.resetMessage();
kqmlMessage.setPerformative("who-am-i");
kqmlMessage.setSender(getName());
dataOut.writeObject(kqmlMessage);
dataOut.flush();
dataOut.reset();
do {
message = (KQML) dataIn.readObject();
isComment = message.getPerformative().equals("comment");
if (isComment) {
System.out.println(message.getContent());
} while (isComment);
if (message.getPerformative().equals("registered")) {
statusACS = ACSStatus.CONNECTED;
} else {
System.out.println(message.getContent());
socketACS.close();
statusACS = ACSStatus.INITIALIZING;
} else {
System.out.println(message.getContent());
socketACS.close();
statusACS = ACSStatus.INITIALIZING;
} catch (IOException e) {
statusACS = ACSStatus.INITIALIZING;
throw e;
} catch (ClassNotFoundException e) {
statusACS = ACSStatus.INITIALIZING;
throw e;
return statusACS.equals(ACSStatus.CONNECTED);
public ACSStatus getACSStatus() {
return statusACS;
protected synchronized void closeConnectionWithACS() { // Only the
// dataOut.close()
try {
dataOut.flush();
dataOut.close();
dataIn.close();
socketACS.close();
} catch (IOException ex) {
ex.printStackTrace();
protected synchronized void sendMessage(KQML message) throws IOException {
dataOut.writeObject(message);
dataOut.flush();
dataOut.reset();
protected synchronized KQML getMessage() {
KQML message = new KQML();
try {
message = (KQML) dataIn.readObject();
return message;
} catch (IOException e) {
e.printStackTrace();
} catch (ClassNotFoundException e) {
e.printStackTrace();
return message;
}Thanks for the answer. I take a look at Swing Worker but i have a few problems :
1)The GUI doesn't freeze but nothing happens either.
2) When i remove the sendMessage method and i put only a System.out.println(somethingToPrint); it works but only once. After i hit second time my send button nothing happens. Somewhere i read that works only once is that true or i misunderstood? And if yes how i can do it every time i press the send button?
Could you take a look at my code?
Thanks in advanced
//Some imports
public class SampleCommunicationAgentGUI extends BaseCommunicationAgent {
public SampleCommunicationAgentGUI(String name) {
super(name);
try {
// agent.connectToREVE("127.0.0.1", 4444);
connectToACS("127.0.0.1", 3333);
} catch (IOException e) {
System.out.print("\nNetwork error while connecting to ACS ("
+ e.getMessage() + ")");
} catch (ClassNotFoundException e) {
System.out.print("\nNetwork error while connecting to ACS ("
+ e.getMessage() + ")");
final SwingWorker worker =
new SwingWorker() {
@Override
protected KQML doInBackground() throws Exception {
KQML message = new KQML();
message.setSender(getName());
message.setReceiver(frame.receiverField.getText());
message.setContent(frame.contentField.getText());
message.setInReplyTo(frame.inReplyToField.getText());
message.setLanguage(frame.languageField.getText());
message.setOntology(frame.ontologyField.getText());
message.setPerformative(frame.perfomativeField.getText());
message.setReplyWith(frame.inReplayWithField.getText());
System.out.println(message.getTotalMsg());
sendMessage(message);
return message;
frame = new SampleAgentFrame(name);
frame.sendBtn.addActionListener(new java.awt.event.ActionListener() {
public void actionPerformed(java.awt.event.ActionEvent evt) {
try{
worker.execute();
} catch (Exception e) {
e.printStackTrace();
frame.setDefaultCloseOperation(JFrame.EXIT_ON_CLOSE);
frame.validate();
frame.setLocationRelativeTo(null);
frame.setVisible(true);
public static SampleAgentFrame frame;
public static void main(String[] args) {
KQML message;
SampleCommunicationAgentGUI agent = new SampleCommunicationAgentGUI("Chris");
if (!agent.getACSStatus().equals(ACSStatus.CONNECTED)) {
System.out.println("\nERROR: Could not connect on ACS!");
return;
while (true) {
message = agent.getMessage();
frame.messageTextArea.append(message.getContent() + "\r\n");
protected static class SampleAgentFrame extends JFrame {
//Some variables
public SampleAgentFrame(String name) {
setTitle(name);
initComponents(name);
* Initializes the GUI.
private void initComponents(String name) {
//Init components
} -
Problem with ScrollPane and JFrame Size
Hi,
The code is workin but after change the size of frame it works CORRECTLY.Please help me why this frame is small an scrollpane doesn't show at the beginning.
Here is the code:
import java.awt.*;
public class canvasExp extends Canvas
private static final long serialVersionUID = 1L;
ImageLoader map=new ImageLoader();
Image img = map.GetImg();
int h, w; // the height and width of this canvas
public void update(Graphics g)
paint(g);
public void paint(Graphics g)
if(img != null)
h = getSize().height;
System.out.println("h:"+h);
w = getSize().width;
System.out.println("w:"+w);
g.drawRect(0,0, w-1, h-1); // Draw border
// System.out.println("Size= "+this.getSize());
g.drawImage(img, 0,0,this.getWidth(),this.getHeight(), this);
int width = img.getWidth(this);
//System.out.println("W: "+width);
int height = img.getHeight(this);
//System.out.println("H: "+height);
if(width != -1 && width != getWidth())
setSize(width, getHeight());
if(height != -1 && height != getHeight())
setSize(getWidth(), height);
}I create frame here...
import java.awt.*;
import java.awt.event.*;
import javax.swing.JFrame;
public class frame extends JFrame implements MouseMotionListener,MouseListener
private static final long serialVersionUID = 1L;
private ScrollPane scrollPane;
private int dragStartX;
private int dragStartY;
private int lastX;
private int lastY;
int cordX;
int cordY;
canvasExp canvas;
public frame()
super("test");
canvas = new canvasExp();
canvas.addMouseListener(this);
canvas.addMouseMotionListener(this);
scrollPane = new ScrollPane();
scrollPane.setEnabled(true);
scrollPane.add(canvas);
add(scrollPane);
setSize(300,300);
pack();
setVisible(true);
setDefaultCloseOperation(JFrame.EXIT_ON_CLOSE);
public void mousePressed(MouseEvent e)
dragStartX = e.getX();
dragStartY = e.getY();
lastX = getX();
lastY = getY();
public void mouseReleased(MouseEvent mouseevent)
public void mouseClicked(MouseEvent e)
cordX = e.getX();
cordY = e.getY();
System.out.println((new StringBuilder()).append(cordX).append(",").append(cordY).toString());
public void mouseEntered(MouseEvent mouseevent)
public void mouseExited(MouseEvent mouseevent)
public void mouseMoved(MouseEvent mouseevent)
public void mouseDragged(MouseEvent e)
if(e.getX() != lastX || e.getY() != lastY)
Point p = scrollPane.getScrollPosition();
p.translate(dragStartX - e.getX(), dragStartY - e.getY());
scrollPane.setScrollPosition(p);
}...and call here
public class main {
public main(){}
public static void main (String args[])
frame f = new frame();
}There is something I couldn't see here.By the way ImageLoader is workin I get the image.
Thank you for your help,please answer me....I'm not going to even attempt to resolve the problem posted. There are other problems with your code that should take priority.
-- class names by convention start with a capital letter.
-- don't use the name of a common class from the standard API for your custom class, not even with a difference of case. It'll come back to bite you.
-- don't mix awt and Swing components in the same GUI. Change your class that extends Canvas to extend JPanel instead, and override paintComponent(...) instead of paint(...).
-- launch your GUI on the EDT by wrapping it in a SwingUtilities.invokeLater or EventQueue.invokeLater.
-- calling setSize(...) followed by pack() is meaningless. Use one or the other.
-- That's not the correct way to display a component in a scroll pane.
Ah, well, and the problem is that when you call pack(), it retrieves the preferredSize of the components in the JFrame, and you haven't set a preferredSize for the scroll pane.
Please, for your own good, take a break from whatever it is you're working on and go through The Java™ Tutorials: [Creating a GUI with JFC/Swing|http://java.sun.com/docs/books/tutorial/uiswing/TOC.html]
db -
Problem with Background image and JFrame
Hi there!
I've the following problem:
I created a JFrame with an integrated JPanel. In this JFrame I display a background image. Therefore I've used my own contentPane:
public class MContentPane extends JComponent{
private Image backgroundImage = null;
public MContentPane() {
super();
* Returns the background image
* @return Background image
public Image getBackgroundImage() {
return backgroundImage;
* Sets the background image
* @param backgroundImage Background image
public void setBackgroundImage(Image backgroundImage) {
this.backgroundImage = backgroundImage;
* Overrides the painting to display a background image
protected void paintComponent(Graphics g) {
if (isOpaque()) {
g.setColor(getBackground());
g.fillRect(0, 0, getWidth(), getHeight());
if (backgroundImage != null) {
g.drawImage(backgroundImage,0,0,this);
super.paintComponent(g);
Now the background image displays correct. But as soon as I click on some combobox that is placed within the integrated JPanel I see fractals of the opened combobox on the background. When I minimize
the Frame they disappear. Sometimes though I get also some fractals when resizing the JFrame.
It seems there is some problem with the redrawing of the background e.g. it doesn't get redrawn as often as it should be!?
Could anyone give me some hint, on how to achieve a clear background after clicking some combobox?
Thx in advanceI still prefer using a border to draw a background image:
import java.awt.*;
import java.awt.image.*;
import javax.swing.border.*;
public class CentredBackgroundBorder implements Border {
private final BufferedImage image;
public CentredBackgroundBorder(BufferedImage image) {
this.image = image;
public void paintBorder(Component c, Graphics g, int x, int y, int width, int height) {
int x0 = x + (width-image.getWidth())/2;
int y0 = y + (height-image.getHeight())/2;
g. drawImage(image, x0, y0, null);
public Insets getBorderInsets(Component c) {
return new Insets(0,0,0,0);
public boolean isBorderOpaque() {
return true;
}And here is a demo where I load the background image asynchronously, so that I can launch the GUI before the image is done loading. Warning: you may find the image disturbing...
import java.awt.*;
import java.io.*;
import java.net.URL;
import javax.imageio.*;
import javax.swing.*;
import javax.swing.border.*;
public class BackgroundBorderExample {
public static void main(String[] args) throws IOException {
JFrame.setDefaultLookAndFeelDecorated(true);
JFrame f = new JFrame("BackgroundBorderExample");
f.setDefaultCloseOperation(JFrame.EXIT_ON_CLOSE);
JTextArea area = new JTextArea(24,80);
area.setForeground(Color.WHITE);
area.setOpaque(false);
area.read(new FileReader(new File("BackgroundBorderExample.java")), null);
final JScrollPane sp = new JScrollPane(area);
sp.setBackground(Color.BLACK);
sp.getViewport().setOpaque(false);
f.getContentPane().add(sp);
f.setSize(600,400);
f.setLocationRelativeTo(null);
f.setVisible(true);
String url = "http://today.java.net/jag/bio/JagHeadshot.jpg";
final Border bkgrnd = new CentredBackgroundBorder(ImageIO.read(new URL(url)));
Runnable r = new Runnable() {
public void run() {
sp.setViewportBorder(bkgrnd);
sp.repaint();
SwingUtilities.invokeLater(r);
} -
Problem with OleDBConnection and WindowForm
Hello,
this is my first post here, so dont get me wrong :p I have 2 diffrents problems with OleDBConnection. First problem is that when i open for example. access database my window from get smaller and elements are bugged.
Second problem is that when i change value in a cell in my datagridrow, source dataset get this change too but problem is when i fire method HasChanged() on my dataset it gives me false so its like i didnt modified cells. But when i remove or add row its
get changes so idk what im doing wrong. Here is code how i change my datagridview values on cells:
okienko.dataGridView1.Rows[index_wiersza].Cells[1].Value = textBox2.Text;
//edit i fixed second problem http://geek-goddess-bonnie.blogspot.com/2009/09/fun-with-datasets.html but still first problem is pain :/
Thx for help.namespace WindowsFormsApplication1
partial class Form1
/// <summary>
/// Required designer variable.
/// </summary>
private System.ComponentModel.IContainer components = null;
/// <summary>
/// Clean up any resources being used.
/// </summary>
/// <param name="disposing">true if managed resources should be disposed; otherwise, false.</param>
protected override void Dispose(bool disposing)
if (disposing && (components != null))
components.Dispose();
base.Dispose(disposing);
#region Windows Form Designer generated code
/// <summary>
/// Required method for Designer support - do not modify
/// the contents of this method with the code editor.
/// </summary>
private void InitializeComponent()
this.components = new System.ComponentModel.Container();
this.button1 = new System.Windows.Forms.Button();
this.contextMenuStrip1 = new System.Windows.Forms.ContextMenuStrip(this.components);
this.ugToolStripMenuItem = new System.Windows.Forms.ToolStripMenuItem();
this.fdfToolStripMenuItem = new System.Windows.Forms.ToolStripMenuItem();
this.fghToolStripMenuItem = new System.Windows.Forms.ToolStripMenuItem();
this.menuStrip1 = new System.Windows.Forms.MenuStrip();
this.tEstToolStripMenuItem = new System.Windows.Forms.ToolStripMenuItem();
this.test2ToolStripMenuItem = new System.Windows.Forms.ToolStripMenuItem();
this.problemToolStripMenuItem = new System.Windows.Forms.ToolStripMenuItem();
this.takToolStripMenuItem = new System.Windows.Forms.ToolStripMenuItem();
this.contextMenuStrip1.SuspendLayout();
this.menuStrip1.SuspendLayout();
this.SuspendLayout();
// button1
this.button1.Location = new System.Drawing.Point(268, 204);
this.button1.Name = "button1";
this.button1.Size = new System.Drawing.Size(75, 82);
this.button1.TabIndex = 0;
this.button1.Text = "button1";
this.button1.UseVisualStyleBackColor = true;
this.button1.Click += new System.EventHandler(this.button1_Click);
// contextMenuStrip1
this.contextMenuStrip1.Items.AddRange(new System.Windows.Forms.ToolStripItem[] {
this.ugToolStripMenuItem,
this.fdfToolStripMenuItem});
this.contextMenuStrip1.Name = "contextMenuStrip1";
this.contextMenuStrip1.Size = new System.Drawing.Size(98, 52);
// ugToolStripMenuItem
this.ugToolStripMenuItem.Name = "ugToolStripMenuItem";
this.ugToolStripMenuItem.Size = new System.Drawing.Size(97, 24);
this.ugToolStripMenuItem.Text = "ug";
// fdfToolStripMenuItem
this.fdfToolStripMenuItem.DropDownItems.AddRange(new System.Windows.Forms.ToolStripItem[] {
this.fghToolStripMenuItem});
this.fdfToolStripMenuItem.Name = "fdfToolStripMenuItem";
this.fdfToolStripMenuItem.Size = new System.Drawing.Size(97, 24);
this.fdfToolStripMenuItem.Text = "fdf";
// fghToolStripMenuItem
this.fghToolStripMenuItem.Name = "fghToolStripMenuItem";
this.fghToolStripMenuItem.Size = new System.Drawing.Size(100, 24);
this.fghToolStripMenuItem.Text = "fgh";
// menuStrip1
this.menuStrip1.Items.AddRange(new System.Windows.Forms.ToolStripItem[] {
this.tEstToolStripMenuItem,
this.test2ToolStripMenuItem});
this.menuStrip1.Location = new System.Drawing.Point(0, 0);
this.menuStrip1.Name = "menuStrip1";
this.menuStrip1.Size = new System.Drawing.Size(408, 28);
this.menuStrip1.TabIndex = 1;
this.menuStrip1.Text = "menuStrip1";
// tEstToolStripMenuItem
this.tEstToolStripMenuItem.Name = "tEstToolStripMenuItem";
this.tEstToolStripMenuItem.Size = new System.Drawing.Size(48, 24);
this.tEstToolStripMenuItem.Text = "TEst";
// test2ToolStripMenuItem
this.test2ToolStripMenuItem.DropDownItems.AddRange(new System.Windows.Forms.ToolStripItem[] {
this.problemToolStripMenuItem});
this.test2ToolStripMenuItem.Name = "test2ToolStripMenuItem";
this.test2ToolStripMenuItem.Size = new System.Drawing.Size(56, 24);
this.test2ToolStripMenuItem.Text = "Test2";
// problemToolStripMenuItem
this.problemToolStripMenuItem.DropDownItems.AddRange(new System.Windows.Forms.ToolStripItem[] {
this.takToolStripMenuItem});
this.problemToolStripMenuItem.Name = "problemToolStripMenuItem";
this.problemToolStripMenuItem.Size = new System.Drawing.Size(175, 24);
this.problemToolStripMenuItem.Text = "Problem";
// takToolStripMenuItem
this.takToolStripMenuItem.Name = "takToolStripMenuItem";
this.takToolStripMenuItem.Size = new System.Drawing.Size(175, 24);
this.takToolStripMenuItem.Text = "Tak";
// Form1
this.AutoScaleDimensions = new System.Drawing.SizeF(8F, 16F);
this.AutoScaleMode = System.Windows.Forms.AutoScaleMode.Font;
this.ClientSize = new System.Drawing.Size(408, 382);
this.Controls.Add(this.menuStrip1);
this.Controls.Add(this.button1);
this.MainMenuStrip = this.menuStrip1;
this.Name = "Form1";
this.Text = "Form1";
this.contextMenuStrip1.ResumeLayout(false);
this.menuStrip1.ResumeLayout(false);
this.menuStrip1.PerformLayout();
this.ResumeLayout(false);
this.PerformLayout();
#endregion
private System.Windows.Forms.Button button1;
private System.Windows.Forms.ContextMenuStrip contextMenuStrip1;
private System.Windows.Forms.ToolStripMenuItem ugToolStripMenuItem;
private System.Windows.Forms.ToolStripMenuItem fdfToolStripMenuItem;
private System.Windows.Forms.ToolStripMenuItem fghToolStripMenuItem;
private System.Windows.Forms.MenuStrip menuStrip1;
private System.Windows.Forms.ToolStripMenuItem tEstToolStripMenuItem;
private System.Windows.Forms.ToolStripMenuItem test2ToolStripMenuItem;
private System.Windows.Forms.ToolStripMenuItem problemToolStripMenuItem;
private System.Windows.Forms.ToolStripMenuItem takToolStripMenuItem; -
Dear Experts,
I have problem with SNR on CME.
When I make call from internal, SNR is working, but when calling from outside to one of my SNR extension, its not
working - not ringing on mobile device.
but from extension 43 I am allowed to call xxxxxxxxx -so when making callforward to xxxxxxxxx its working.
ephone-dn 43 dual-line
number 43 no-reg primary
pickup-group 4
label xxx
description xxx
name xxx
mobility
snr xxxxxxxx delay 1 timeout 18 cfwd-noan 90
snr ring-stop
snr answer-too-soon 4
allow watch
call-forward busy 90
call-forward noan 90 timeout 18
need helpThere is a well know issue with SNR and Call forward all when the calling number is not a DID assigned by the Telco.
Post here your debug isdn q931 to confirm if it is the case. Most likely you will have to convince your Telco to let you do this or implement translation rules on the voice gateway to override the calling number.
Olease rate helpful answers! -
Problem with MacMail on MacBook Air
3 days ago I failed to send a mail with a large (32MB) attachment - and it is no longer in my outbox, draft mails or sent file.
BUT a copy of this same mail now appears every about 15 seconds in my "recovered messages" folder
I noticed when I received a system error saying I had a disk almost full issue - there were over 580 copies of the mail with 32MB attachment in the "recovered messages file"
I deleted them all, and deleted the Trash
BUT the message still keeps re-appearing every 15 seconds or so. So I keep deleting them.
Since then I have not been able to receive mail (altho' I am able to send) and Mail is VERY slow
I am running MAC OS X 10.6.8
I am running Mail version 4.6 (1085)Also here's the log before it happened. As you can see there is no activity from 9:48 to 10:00 am when the sound occurred.
23/02/2014 9:48:12.792 am ntpd[52]: FREQ state ignoring -0.145411 s
23/02/2014 9:48:15.258 am WindowServer[96]: _CGXHWCaptureWindowList: No capable active display found.
23/02/2014 9:48:20.000 am kernel[0]: AppleCamIn::systemWakeCall - messageType = 0xE0000280
23/02/2014 9:48:20.000 am kernel[0]: ARPT: 61.319378: AirPort_Brcm43xx::powerChange: System Sleep
23/02/2014 9:48:20.000 am kernel[0]: ARPT: 61.319390: wl0: powerChange: *** BONJOUR/MDNS OFFLOADS ARE NOT RUNNING.
23/02/2014 9:48:20.000 am kernel[0]: AppleCamIn::systemWakeCall - messageType = 0xE0000340
23/02/2014 10:00:04.000 am bootlog[0]: BOOT_TIME 1393167604 0
23/02/2014 10:00:06.000 am syslogd[17]: Configuration Notice:
ASL Module "com.apple.appstore" claims selected messages.
Those messages may not appear in standard system log files or in the ASL database.
23/02/2014 10:00:06.000 am syslogd[17]: Configuration Notice:
ASL Module "com.apple.authd" sharing output destination "/var/log/system.log" with ASL Module "com.apple.asl".
Output parameters from ASL Module "com.apple.asl" override any specified in ASL Module "com.apple.authd". -
Hello,
Im using Photoshop CC and when it starts up it sometimes gives me this error message:
'Problem with display driver and has temporary disabled enhancements which use graphics hardware.'
What does this mean?
Then it tells me to download the latstest software and gives me a link to an Adobe site that tells me nothing about a sollution.
About my mac:
MacBook Pro
Intel Core i7
2,2 GHz
4 cores
8 GB RAM
AMD Radeon HD 6750M
Thanks a bunch!Here you go:
Adobe Photoshop Version: 14.2 (14.2 20131211.r.515 2013/12/11:23:00:00) x64
Operating System: Mac OS 10.9.1
System architecture: Intel CPU Family:6, Model:42, Stepping:7 with MMX, SSE Integer, SSE FP, SSE2, SSE3, SSE4.1, SSE4.2, HyperThreading
Physical processor count: 4
Logical processor count: 8
Processor speed: 2200 MHz
Built-in memory: 4096 MB
Free memory: 2266 MB
Memory available to Photoshop: 3136 MB
Memory used by Photoshop: 80 %
Image tile size: 1024K
Image cache levels: 4
Font Preview: Medium
TextComposer: Latin
The GPU Sniffer crashed on 10/01/2014 at 09:05:58
Display: 1
Main Display
Display Bounds: top=0, left=0, bottom=900, right=1440
OpenGL Drawing: Enabled.
OpenGL Allow Old GPUs: Not Detected.
OpenGL Drawing Mode: Advanced
OpenGL Allow Normal Mode: True.
OpenGL Allow Advanced Mode: True.
AIFCoreInitialized=1
AIFOGLInitialized=1
OGLContextCreated=1
NumGPUs=1
gpu[0].OGLVersion="2.1"
gpu[0].MemoryMB=1024
gpu[0].RectTextureSize=16384
gpu[0].Renderer="AMD Radeon HD 6750M OpenGL Engine"
gpu[0].RendererID=16915206
gpu[0].Vendor="ATI Technologies Inc."
gpu[0].VendorID=4098
gpu[0].HasNPOTSupport=1
gpu[0].CompileProgramGLSL=1
gpu[0].TestFrameBuffer=1
gpu[0].OCLPresent=1
gpu[0].OCLVersion="1.2 (Aug 24 2013 21:03:27)"
gpu[0].CUDASupported=0
gpu[0].OCLBandwidth=1.89051e+10
gpu[0].glGetString[GL_SHADING_LANGUAGE_VERSION]="1.20"
gpu[0].glGetProgramivARB[GL_FRAGMENT_PROGRAM_ARB][GL_MAX_PROGRAM_INSTRUCTIONS_ARB]=[4096]
gpu[0].glGetIntegerv[GL_MAX_TEXTURE_UNITS]=[8]
gpu[0].glGetIntegerv[GL_MAX_COMBINED_TEXTURE_IMAGE_UNITS]=[16]
gpu[0].glGetIntegerv[GL_MAX_VERTEX_TEXTURE_IMAGE_UNITS]=[16]
gpu[0].glGetIntegerv[GL_MAX_TEXTURE_IMAGE_UNITS]=[16]
gpu[0].glGetIntegerv[GL_MAX_DRAW_BUFFERS]=[8]
gpu[0].glGetIntegerv[GL_MAX_VERTEX_UNIFORM_COMPONENTS]=[3072]
gpu[0].glGetIntegerv[GL_MAX_FRAGMENT_UNIFORM_COMPONENTS]=[3072]
gpu[0].glGetIntegerv[GL_MAX_VARYING_FLOATS]=[128]
gpu[0].glGetIntegerv[GL_MAX_VERTEX_ATTRIBS]=[16]
gpu[0].extension[AIF::OGL::GL_ARB_VERTEX_PROGRAM]=1
gpu[0].extension[AIF::OGL::GL_ARB_FRAGMENT_PROGRAM]=1
gpu[0].extension[AIF::OGL::GL_ARB_VERTEX_SHADER]=1
gpu[0].extension[AIF::OGL::GL_ARB_FRAGMENT_SHADER]=1
gpu[0].extension[AIF::OGL::GL_EXT_FRAMEBUFFER_OBJECT]=1
gpu[0].extension[AIF::OGL::GL_ARB_TEXTURE_RECTANGLE]=1
gpu[0].extension[AIF::OGL::GL_ARB_TEXTURE_FLOAT]=1
gpu[0].extension[AIF::OGL::GL_ARB_OCCLUSION_QUERY]=1
gpu[0].extension[AIF::OGL::GL_ARB_VERTEX_BUFFER_OBJECT]=1
gpu[0].extension[AIF::OGL::GL_ARB_SHADER_TEXTURE_LOD]=1
License Type: Subscription
Serial number:
Application folder: /Applications/Adobe Photoshop CC/
Photoshop scratch has async I/O enabled
Scratch volume(s):
Macintosh HD, 697.8G, 107.2G free
Required Plug-ins folder: /Applications/Adobe Photoshop CC/Adobe Photoshop CC.app/Contents/Required/Plug-Ins/
Primary Plug-ins folder: /Applications/Adobe Photoshop CC/Plug-Ins/
Installed components:
adbeape.framework adbeape 3.4.0.29366 0.1160850
AdbeScriptUIFlex.framework AdbeScriptUIFlex 6.3.2.31983 79.546835
adobe_caps.framework adobe_caps 7.0.0.21 1.248010
AdobeACE.framework AdobeACE 2.20.02.31977 79.548223
AdobeAGM.framework AdobeAGM 4.30.29.31977 79.548223
AdobeAXE8SharedExpat.framework AdobeAXE8SharedExpat 3.7.101.18636 66.26830
AdobeAXEDOMCore.framework AdobeAXEDOMCore 3.7.101.18636 66.26830
AdobeBIB.framework AdobeBIB 1.2.03.31977 79.548223
AdobeBIBUtils.framework AdobeBIBUtils 1.1.01 79.548223
AdobeCoolType.framework AdobeCoolType 5.15.00.31977 79.548223
AdobeCrashReporter.framework AdobeCrashReporter 7.0.1
AdobeExtendScript.framework AdobeExtendScript 4.5.5.31983 79.546835
AdobeJP2K.framework AdobeJP2K 1.2.2.31977 79.248139
AdobeLinguistic.framework 19061
AdobeMPS.framework AdobeMPS 5.8.1.31977 79.535029
AdobeOwl.framework AdobeOwl 5.0.24 79.547804
AdobePDFL.framework AdobePDFL 11.0.0.31977 79.508720
AdobePDFSettings.framework AdobePDFSettings 1.4
AdobePIP.framework AdobePIP 7.0.0.1786
AdobeScCore.framework AdobeScCore 4.5.5.31983 79.546835
AdobeUpdater.framework AdobeUpdater 6.0.0.1452 "52.338651"
AdobeXMP.framework AdobeXMPCore 79.154911 79.154911
AdobeXMPFiles.framework AdobeXMPFiles 79.154911 79.154911
AdobeXMPScript.framework AdobeXMPScript 79.154911 79.154911
ahclient.framework ahclient 1.8.0.31
aif_core.framework AdobeAIF 5.0.00 79.534508
aif_ocl.framework AdobeAIF 5.0.00 79.534508
aif_ogl.framework AdobeAIF 5.0.00 79.534508
AlignmentLib.framework xcode Copyright © 2013 Adobe Systems Incorporated
amtlib.framework amtlib 7.0.0.249
boost_date_time.framework boost_date_time 7.0.0.0
boost_signals.framework boost_signals 7.0.0.0
boost_system.framework boost_system 7.0.0.0
boost_threads.framework boost_threads 7.0.0.0
Cg.framework NVIDIA Cg
CIT.framework CIT 2.1.6.30929 151865
CITThreading.framework CITThreading 2.1.6.30929 151865
dvaaudiodevice.framework dvaaudiodevice 7.0.0.0
dvacore.framework dvacore 7.0.0.0
dvamarshal.framework dvamarshal 7.0.0.0
dvamediatypes.framework dvamediatypes 7.0.0.0
dvaplayer.framework dvaplayer 7.0.0.0
dvatransport.framework dvatransport 7.0.0.0
dvaunittesting.framework dvaunittesting 7.0.0.0
dynamiclink.framework dynamiclink 7.0.0.0
FileInfo.framework FileInfo 79.154511 79.154511
filter_graph.framework AdobeAIF 5.0.00 79.534508
ICUConverter.framework ICUConverter 3.61 "gtlib_3.0" "." "16615"
ICUData.framework ICUData 3.61 "gtlib_3.0" "." "16615"
LogSession.framework LogSession 2.1.2.1785
mediacoreif.framework mediacoreif 7.0.0.0
patchmatch.framework patchmatch 1.2.00.31977 79.542390
PlugPlugOwl.framework PlugPlugOwl 4.2.0.36
UpdaterNotifications.framework UpdaterNotifications 7.0.1.102 "7.0.1.102"
WRServices.framework
Required plug-ins:
3D Studio 14.2 x001 ©2006-2014 Adobe Systems Incorporated - from the file “U3D.plugin”
Accented Edges 14.2, Copyright © 1991-2014 Adobe Systems Incorporated - from the file “Filter Gallery.plugin”
Adaptive Wide Angle 14.2, Copyright © 2014 Adobe Systems Incorporated - from the file “Adaptive Wide Angle.plugin”
Angled Strokes 14.2, Copyright © 1991-2014 Adobe Systems Incorporated - from the file “Filter Gallery.plugin”
Average 14.2 x001 ©1993-2014 Adobe Systems Incorporated - from the file “Average.plugin”
Bas Relief 14.2, Copyright © 1991-2014 Adobe Systems Incorporated - from the file “Filter Gallery.plugin”
BMP 14.2, Copyright © 2003-2014 Adobe Systems Incorporated - from the file “Standard Multiplugin.plugin”
Camera Raw 8.3 (141), Copyright © 2013 Adobe Systems Incorporated - from the file “Camera Raw.plugin”
Camera Raw Filter 8.3 (141), Copyright © 2013 Adobe Systems Incorporated - from the file “Camera Raw.plugin”
Chalk & Charcoal 14.2, Copyright © 1991-2014 Adobe Systems Incorporated - from the file “Filter Gallery.plugin”
Charcoal 14.2, Copyright © 1991-2014 Adobe Systems Incorporated - from the file “Filter Gallery.plugin”
Chrome 14.2, Copyright © 1991-2014 Adobe Systems Incorporated - from the file “Filter Gallery.plugin”
Cineon 14.2 x001 ©2002-2014 Adobe Systems Incorporated - from the file “Cineon.plugin”
Clouds 14.2 x001 ©1993-2014 Adobe Systems Incorporated - from the file “Clouds.plugin”
Collada DAE 14.2 x001 ©2006-2014 Adobe Systems Incorporated - from the file “U3D.plugin”
Color Halftone 14.2, Copyright © 2003-2014 Adobe Systems Incorporated - from the file “Standard Multiplugin.plugin”
Colored Pencil 14.2, Copyright © 1991-2014 Adobe Systems Incorporated - from the file “Filter Gallery.plugin”
CompuServe GIF 14.2, Copyright © 2003-2014 Adobe Systems Incorporated - from the file “Standard Multiplugin.plugin”
Conté Crayon 14.2, Copyright © 1991-2014 Adobe Systems Incorporated - from the file “Filter Gallery.plugin”
Craquelure 14.2, Copyright © 1991-2014 Adobe Systems Incorporated - from the file “Filter Gallery.plugin”
Crop and Straighten Photos 14.2 x001 ©2003-2014 Adobe Systems Incorporated - from the file “CropPhotosAuto.plugin”
Crop and Straighten Photos Filter 14.2, Copyright © 2003-2014 Adobe Systems Incorporated - from the file “Standard Multiplugin.plugin”
Crosshatch 14.2, Copyright © 1991-2014 Adobe Systems Incorporated - from the file “Filter Gallery.plugin”
Crystallize 14.2, Copyright © 2003-2014 Adobe Systems Incorporated - from the file “Standard Multiplugin.plugin”
Cutout 14.2, Copyright © 1991-2014 Adobe Systems Incorporated - from the file “Filter Gallery.plugin”
Dark Strokes 14.2, Copyright © 1991-2014 Adobe Systems Incorporated - from the file “Filter Gallery.plugin”
De-Interlace 14.2, Copyright © 2003-2014 Adobe Systems Incorporated - from the file “Standard Multiplugin.plugin”
Dicom 14.2, Copyright © 2003-2014 Adobe Systems Incorporated - from the file “dicom.plugin”
Difference Clouds 14.2 x001 ©1993-2014 Adobe Systems Incorporated - from the file “Clouds.plugin”
Diffuse Glow 14.2, Copyright © 1991-2014 Adobe Systems Incorporated - from the file “Filter Gallery.plugin”
Displace 14.2, Copyright © 2003-2014 Adobe Systems Incorporated - from the file “Standard Multiplugin.plugin”
Dry Brush 14.2, Copyright © 1991-2014 Adobe Systems Incorporated - from the file “Filter Gallery.plugin”
Eazel Acquire 14.2 x001 ©1997-2014 Adobe Systems Incorporated - from the file “EazelAcquire.plugin”
Embed Watermark NO VERSION - from the file “DigiSign.plugin”
Entropy 14.2 x001 ©2006-2014 Adobe Systems Incorporated - from the file “statistics.plugin”
Extrude 14.2, Copyright © 2003-2014 Adobe Systems Incorporated - from the file “Standard Multiplugin.plugin”
FastCore Routines 14.2 x001 ©1990-2014 Adobe Systems Incorporated - from the file “FastCore.plugin”
Fibers 14.2, Copyright © 2003-2014 Adobe Systems Incorporated - from the file “Standard Multiplugin.plugin”
Film Grain 14.2, Copyright © 1991-2014 Adobe Systems Incorporated - from the file “Filter Gallery.plugin”
Filter Gallery 14.2, Copyright © 1991-2014 Adobe Systems Incorporated - from the file “Filter Gallery.plugin”
Flash 3D 14.2 x001 ©2006-2014 Adobe Systems Incorporated - from the file “U3D.plugin”
Fresco 14.2, Copyright © 1991-2014 Adobe Systems Incorporated - from the file “Filter Gallery.plugin”
Glass 14.2, Copyright © 1991-2014 Adobe Systems Incorporated - from the file “Filter Gallery.plugin”
Glowing Edges 14.2, Copyright © 1991-2014 Adobe Systems Incorporated - from the file “Filter Gallery.plugin”
Google Earth 4 KMZ 14.2 x001 ©2006-2014 Adobe Systems Incorporated - from the file “U3D.plugin”
Grain 14.2, Copyright © 1991-2014 Adobe Systems Incorporated - from the file “Filter Gallery.plugin”
Graphic Pen 14.2, Copyright © 1991-2014 Adobe Systems Incorporated - from the file “Filter Gallery.plugin”
Halftone Pattern 14.2, Copyright © 1991-2014 Adobe Systems Incorporated - from the file “Filter Gallery.plugin”
HDRMergeUI 14.2, Copyright © 2003-2014 Adobe Systems Incorporated - from the file “HDRMergeUI.plugin”
IFF Format 14.2, Copyright © 2003-2014 Adobe Systems Incorporated - from the file “Standard Multiplugin.plugin”
Ink Outlines 14.2, Copyright © 1991-2014 Adobe Systems Incorporated - from the file “Filter Gallery.plugin”
JPEG 2000 14.2 x001 ©2001-2014 Adobe Systems Incorporated - from the file “JPEG2000.plugin”
Kurtosis 14.2 x001 ©2006-2014 Adobe Systems Incorporated - from the file “statistics.plugin”
Lens Blur 14.2, Copyright © 2002-2014 Adobe Systems Incorporated - from the file “Lens Blur.plugin”
Lens Correction 14.2, Copyright © 2002-2014 Adobe Systems Incorporated - from the file “Lens Correct.plugin”
Lens Flare 14.2, Copyright © 2003-2014 Adobe Systems Incorporated - from the file “Standard Multiplugin.plugin”
Liquify 14.2, Copyright © 2001-2014 Adobe Systems Incorporated - from the file “Liquify.plugin”
Matlab Operation 14.2 x001 ©1993-2014 Adobe Systems Incorporated - from the file “ChannelPort.plugin”
Maximum 14.2 x001 ©2006-2014 Adobe Systems Incorporated - from the file “statistics.plugin”
Mean 14.2 x001 ©2006-2014 Adobe Systems Incorporated - from the file “statistics.plugin”
Measurement Core 14.2 x001 ©1993-2014 Adobe Systems Incorporated - from the file “MeasurementCore.plugin”
Median 14.2 x001 ©2006-2014 Adobe Systems Incorporated - from the file “statistics.plugin”
Mezzotint 14.2, Copyright © 2003-2014 Adobe Systems Incorporated - from the file “Standard Multiplugin.plugin”
Minimum 14.2 x001 ©2006-2014 Adobe Systems Incorporated - from the file “statistics.plugin”
MMXCore Routines 14.2 x001 ©1990-2014 Adobe Systems Incorporated - from the file “MMXCore.plugin”
Mosaic Tiles 14.2, Copyright © 1991-2014 Adobe Systems Incorporated - from the file “Filter Gallery.plugin”
Multiprocessor Support 14.2 x001 ©1990-2014 Adobe Systems Incorporated - from the file “MultiProcessor Support.plugin”
Neon Glow 14.2, Copyright © 1991-2014 Adobe Systems Incorporated - from the file “Filter Gallery.plugin”
Note Paper 14.2, Copyright © 1991-2014 Adobe Systems Incorporated - from the file “Filter Gallery.plugin”
NTSC Colors 14.2 x001 ©1993-2014 Adobe Systems Incorporated - from the file “NTSC Colors.plugin”
Ocean Ripple 14.2, Copyright © 1991-2014 Adobe Systems Incorporated - from the file “Filter Gallery.plugin”
Oil Paint 14.2, Copyright © 2014 Adobe Systems Incorporated - from the file “Oil Paint.plugin”
OpenEXR 14.2, Copyright © 2003-2014 Adobe Systems Incorporated - from the file “Standard Multiplugin.plugin”
Paint Daubs 14.2, Copyright © 1991-2014 Adobe Systems Incorporated - from the file “Filter Gallery.plugin”
Palette Knife 14.2, Copyright © 1991-2014 Adobe Systems Incorporated - from the file “Filter Gallery.plugin”
Patchwork 14.2, Copyright © 1991-2014 Adobe Systems Incorporated - from the file “Filter Gallery.plugin”
Paths to Illustrator 14.2, Copyright © 2003-2014 Adobe Systems Incorporated - from the file “Standard Multiplugin.plugin”
PCX 14.2 x001 ©1989-2014 Adobe Systems Incorporated - from the file “PCX.plugin”
Photocopy 14.2, Copyright © 1991-2014 Adobe Systems Incorporated - from the file “Filter Gallery.plugin”
Photoshop 3D Engine 14.2 x001 ©2006-2014 Adobe Systems Incorporated - from the file “Photoshop3DEngine.plugin”
Photoshop Touch CC (14.2.0.0) ©1993-2014 Adobe Systems Incorporated - from the file “PSDX.plugin”
Picture Package Filter 14.2 x001 ©1993-2014 Adobe Systems Incorporated - from the file “ChannelPort.plugin”
Pinch 14.2, Copyright © 2003-2014 Adobe Systems Incorporated - from the file “Standard Multiplugin.plugin”
Pixar 14.2 x001 ©1989-2014 Adobe Systems Incorporated - from the file “Pixar.plugin”
Plaster 14.2, Copyright © 1991-2014 Adobe Systems Incorporated - from the file “Filter Gallery.plugin”
Plastic Wrap 14.2, Copyright © 1991-2014 Adobe Systems Incorporated - from the file “Filter Gallery.plugin”
PNG 14.2, Copyright © 2003-2014 Adobe Systems Incorporated - from the file “Standard Multiplugin.plugin”
Pointillize 14.2, Copyright © 2003-2014 Adobe Systems Incorporated - from the file “Standard Multiplugin.plugin”
Polar Coordinates 14.2, Copyright © 2003-2014 Adobe Systems Incorporated - from the file “Standard Multiplugin.plugin”
Portable Bit Map 14.2 x001 ©1989-2014 Adobe Systems Incorporated - from the file “PBM.plugin”
Poster Edges 14.2, Copyright © 1991-2014 Adobe Systems Incorporated - from the file “Filter Gallery.plugin”
Radial Blur 14.2, Copyright © 2003-2014 Adobe Systems Incorporated - from the file “Standard Multiplugin.plugin”
Radiance 14.2 x001 ©2003-2014 Adobe Systems Incorporated - from the file “Radiance.plugin”
Range 14.2 x001 ©2006-2014 Adobe Systems Incorporated - from the file “statistics.plugin”
Read Watermark NO VERSION - from the file “DigiRead.plugin”
Reticulation 14.2, Copyright © 1991-2014 Adobe Systems Incorporated - from the file “Filter Gallery.plugin”
Ripple 14.2, Copyright © 2003-2014 Adobe Systems Incorporated - from the file “Standard Multiplugin.plugin”
Rough Pastels 14.2, Copyright © 1991-2014 Adobe Systems Incorporated - from the file “Filter Gallery.plugin”
Save for Web 14.2, Copyright © 1999-2014 Adobe Systems Incorporated - from the file “Save for Web.plugin”
ScriptingSupport 14.2, Copyright © 2014 Adobe Systems Incorporated - from the file “ScriptingSupport.plugin”
Shake Reduction 14.2, Copyright © 2014 Adobe Systems Incorporated - from the file “Shake Reduction.plugin”
Shear 14.2, Copyright © 2003-2014 Adobe Systems Incorporated - from the file “Standard Multiplugin.plugin”
Skewness 14.2 x001 ©2006-2014 Adobe Systems Incorporated - from the file “statistics.plugin”
Smart Blur 14.2, Copyright © 2003-2014 Adobe Systems Incorporated - from the file “Standard Multiplugin.plugin”
Smudge Stick 14.2, Copyright © 1991-2014 Adobe Systems Incorporated - from the file “Filter Gallery.plugin”
Solarize 14.2 x001 ©1993-2014 Adobe Systems Incorporated - from the file “Solarize.plugin”
Spatter 14.2, Copyright © 1991-2014 Adobe Systems Incorporated - from the file “Filter Gallery.plugin”
Spherize 14.2, Copyright © 2003-2014 Adobe Systems Incorporated - from the file “Standard Multiplugin.plugin”
Sponge 14.2, Copyright © 1991-2014 Adobe Systems Incorporated - from the file “Filter Gallery.plugin”
Sprayed Strokes 14.2, Copyright © 1991-2014 Adobe Systems Incorporated - from the file “Filter Gallery.plugin”
Stained Glass 14.2, Copyright © 1991-2014 Adobe Systems Incorporated - from the file “Filter Gallery.plugin”
Stamp 14.2, Copyright © 1991-2014 Adobe Systems Incorporated - from the file “Filter Gallery.plugin”
Standard Deviation 14.2 x001 ©2006-2014 Adobe Systems Incorporated - from the file “statistics.plugin”
STL 14.2 x001 ©2006-2014 Adobe Systems Incorporated - from the file “U3D.plugin”
Sumi-e 14.2, Copyright © 1991-2014 Adobe Systems Incorporated - from the file “Filter Gallery.plugin”
Summation 14.2 x001 ©2006-2014 Adobe Systems Incorporated - from the file “statistics.plugin”
Targa 14.2, Copyright © 2003-2014 Adobe Systems Incorporated - from the file “Standard Multiplugin.plugin”
Texturizer 14.2, Copyright © 1991-2014 Adobe Systems Incorporated - from the file “Filter Gallery.plugin”
Tiles 14.2, Copyright © 2003-2014 Adobe Systems Incorporated - from the file “Standard Multiplugin.plugin”
Torn Edges 14.2, Copyright © 1991-2014 Adobe Systems Incorporated - from the file “Filter Gallery.plugin”
Twirl 14.2, Copyright © 2003-2014 Adobe Systems Incorporated - from the file “Standard Multiplugin.plugin”
Underpainting 14.2, Copyright © 1991-2014 Adobe Systems Incorporated - from the file “Filter Gallery.plugin”
Vanishing Point 14.2, Copyright © 2003-2014 Adobe Systems Incorporated - from the file “VanishingPoint.plugin”
Variance 14.2 x001 ©2006-2014 Adobe Systems Incorporated - from the file “statistics.plugin”
Water Paper 14.2, Copyright © 1991-2014 Adobe Systems Incorporated - from the file “Filter Gallery.plugin”
Watercolor 14.2, Copyright © 1991-2014 Adobe Systems Incorporated - from the file “Filter Gallery.plugin”
Wave 14.2, Copyright © 2003-2014 Adobe Systems Incorporated - from the file “Standard Multiplugin.plugin”
Wavefront|OBJ 14.2 x001 ©2006-2014 Adobe Systems Incorporated - from the file “U3D.plugin”
Wind 14.2, Copyright © 2003-2014 Adobe Systems Incorporated - from the file “Standard Multiplugin.plugin”
Wireless Bitmap 14.2 x001 ©1989-2014 Adobe Systems Incorporated - from the file “WBMP.plugin”
ZigZag 14.2, Copyright © 2003-2014 Adobe Systems Incorporated - from the file “Standard Multiplugin.plugin”
Optional and third party plug-ins: NONE
Plug-ins that failed to load: NONE
Flash:
Mini Bridge
Kuler
Adobe Exchange
Installed TWAIN devices: NONE
Maybe you are looking for
-
I can't update iPhoto, GarageBand nor iMovie, and I can't open iPhoto at all.
I can't update iPhoto, GarageBand nor iMovie, and iPhoto is the only one I can't open at all. I bought my Macbook half a year ago and when I try to update the Apps it says it's being modified and then that there was an error with Apple Store ):
-
My computer recognizes my old iPhone, iPad and iPod but NOT my new iPhone. What the heck???
My computer recognizes my old iPhone, iPad and iPod but NOT my new iPhone what the heck? It was fine last week, now nothing
-
I just received an email from Apple saying that my iMac hard disk needs to be replaced urgently. I made an appointment with the Genius on coming Sat. I have some questions about the replacement and seeking the advice with other people who has got s
-
Struts + ActionErrors + JDeveloper 10.1.3.4
Hi, i'm working with Stuts and JDeveloper 10.1.3.4. My actions (DataPages) classes extends PageController. I wanna show struts error messages like using the saveErrors() method, but this method was removed since 10.1.3 version. How can i do that?. (s
-
All SAP Gurus, I want to block one time vendor, for that I have used MK05 Will blocking from MK05 is sufficient for blocking it completely, means no further invoices should be posted for this vendor. Regards, rajan