Australis does not take up enough vertical space.

Removing the option to use small icons was a step in the right direction, but there's still too much vertical space. I suggest adding more padding, larger icons, and perhaps more default toolbars to reduce the vertical viewing space to about 1 pixel.

I assume that this is not really a problem, but rather meant to be ironically to emphasize that the Australis design is taking a lot more screen estate for the user interface then the current release leaving less room for the browsing area.<br />
The OP seems to suggest to enlarge all toolbar items that much that the full screen minus 1px will be taken up by the toolbars and its icons. :wink:<br />
Yes, the Australis design is taking up more screen estate as this is to prepare for touch screens and tablets that need larger icons.
There will probably be themes and extensions that will address this expansion for normal screens and allow for more browsing estate in these cases.

Similar Messages

When I open Firefox (after upgrade) it does not show right side vertical scroller bar. I have to take the mouse and physically expand the browser to get the scroller bar to show. (never had this problem in previoius versions of firefox)

Firefox 4.0 on Mac OS 10.6.7 When I open Firefox it does not show the right vertical scroller. I have to take my mouse to the lower right corner and drag it open slightly and the scoller appears It will stay active through other tabs now until I close or shut down firefox. Once I reopen the same thing again no vertical scroller bar.

Yes AT&T is my ISP. I use DSL. Currently I am not at my home address. I am currently on a cable modem on COX.com.
I am also receiving a warning message "WARNING: Parental control appears compromised!".

I am using Illustrator CS5. I am using a certain font and when I make a selection to use one of the letter options or a glyph, it does not take my selection; in other words, nothing changes.

I am using Illustrator CS5. I am using a certain font and when I make a selection to use one of the letter options or a glyph, it does not take my selection; in other words, nothing changes.

What font? What system? What Glyph? What language settings? Could be anything. Either way, ask in the AI forum. You'll get quicker answers there - if you provide all the required info.
Mylenium

After doing a Google search - when I click on a link it does not take me to the corect website. Instead it always take me to some icity webpage. How do I fix this so that Firefox takes me to the correct website that the Google search found?

After doing a Google search - when I click on a link it does not take me to the correct website. Instead it always take me to some icity webpage. How do I fix this so that Firefox takes me to the correct website that the Google search found?

After doing a Google search - when I click on a link it does not take me to the correct website. Instead it always take me to some icity webpage. How do I fix this so that Firefox takes me to the correct website that the Google search found?

What is "Other" and why does it take up so much space?

What is "Other" and why does it take up so much space?

What is the Other on my iPhone and How to Remove It
An "other" larger than about 1 1/2 GB usually indicates that the "other" includes corrupted files.
First try:
"First you go settings/general/usage/music/then left swipe over music and press delete and you would think it deletes your music but it doesn't instead it deletes your other but make sure your ipod is connected to a computer while doing this"
as recommended by:
How do I get rid of "other" storage: Apple Support Communities
Next, usually restoring from backup eliminated the corrupted files. However, sometimes restoring to factory settings/new iPod is required.
To restore from backup see:
iOS: How to back up

HS.EXP does not take into account the Value member and the source

Hello,
The formula is put in the "Entity Curr Adjs" part of the Sub Calculate.
The expression is the following and apply for one entity (Holding method) I filtered previously and the ICP Entity has proportionnal method with 50% rate:
HS.Exp "A#5420.I#[ICP None].C1#REC.C2#[None].C3#[None].C4#Recla_IAS_Aut_RetS_5=
A#5340.V#[Contribution].E#Logista_E_TBCO.I#UTE_O.C1#CLO.C2#TotC2.C3#TotC3.C4#TotC4"
The data I would like to retrieve is the one in Contribution Value as I put on the source part of the expression.
And yet, the data I get is the one of the Entity Currency and Proportion Value, which is different because the ICP has proportionnal method (50%) and the Contribution value is the result of Proportion - Elimination values.
To sum up: I obtain a data of 50 instead of 25.
I checked that the data I see in my form corresponds to the source parameters but it seems that it does not take into account the Value parameter.
Could it be that it is not possible to use a Contribution Value source for an Entity Currency Adjs destination?
Thanks in advance.
Regards,
Julien

Hi,
I see another problem in what you're trying to do. First, let me state what you're trying to establish: you are trying to get a value from one entity (say A) to another entity (say B), be it at [Proportion], [Elimination], [Contribution], ...
My question is: how can you know that during the consolidation process, by the time your code runs on B, A has already been processed and [Proportion], [Elimination] are not empty (or contain values from a previous consolidation run)?
The answer is "You don't". Theoretically, you have no control as per the order in which entities are calculated/consolidated during the process. Even more complex is the thing that if you have a multi-core machine, more than one entities may run in parallel, but still you cannot force A to run before B. I have done some tests and I've seen that in a one processor setting the order that entities enter in the process of consolidation matches the order you have placed them in the consolidation tree in metadata. Still this thing is not documented as far as I know and therefore you cannot rely on this.
Finally, I have also seen that in a simple case (B pulls from A), if you run consolidation twice, then you definitely get correct values. By the time you make a change in A, you have to run consolidation twice again to make sure that you get the correct data. I believe that you see that what I'm describing is good for experimenting but not for releasing to a client.
I tend to think of such a design, as a practice to avoid.
--Kostas

Data in cell does not take effect immed

Hi I have JTable with all cells editable.
Problem is when user click on a cell and enter the data. That data does not get immediately take effect in table model unless user click on some other cell.
How can i make data immediately available when for example user click on Change button and user does not have to click on any other cell.
eg...row has 4 columns.....123....456....date....date
if user changes 123 to 321...and click on CHange button i have in panel. ..it does not take effect.....user has to click on some other cell ie eg 456 cell.....then press Change button.

in preparetable where i set the model, create columns, set renderer and editors. I even tried at the end of that method..ie added this line....still did not work....please help
public void prepairLnnTable() {
    lnnTableModel = new CellSiteLNNTableModel();
    lnnTable.setModel(lnnTableModel);
    lnnTableModel.addColumn("AAA");
    lnnTableModel.addColumn("BBB");
    lnnTableModel.addColumn("Effective From");
    lnnTableModel.addColumn("Effective To");
    ccpd6.setAllowedCharacters("0123456789");
    ccpd7.setAllowedCharacters("0123456789");
    for(int k = 0; k < lnnTableModel.getColumnCount(); k++) {
      TableColumn col = lnnTable.getColumn(lnnTableModel.getColumnName(k));
      DefaultTableCellRenderer textRenderer = new DefaultTableCellRenderer();
      JTextField textColumn = new JTextField();
      TableCellRenderer renderer = null;
//      TableCellEditor editor = null;
      if(k == CellSiteLNN.AAA) {
        renderer = textRenderer;
        DefaultCellEditor editor = new DefaultCellEditor(textColumn);
        editor.setClickCountToStart(1);
        col.setPreferredWidth(25);
        textColumn.setDocument(ccpd6);
        col.setCellEditor(editor);
      if(k == CellSiteLNN.BBB) {
        renderer = textRenderer;
        DefaultCellEditor editor = new DefaultCellEditor(textColumn);
        editor.setClickCountToStart(1);
        col.setPreferredWidth(25);
        textColumn.setDocument(ccpd7);
        col.setCellEditor(editor);
      if(k == CellSiteLNN.EFF_FROM) {
        renderer = new DateCellRenderer();
        TableCellEditor editor = new DateCellEditor();
        col.setPreferredWidth(180);
        col.setCellEditor(editor);
      if(k == CellSiteLNN.EFF_TO) {
        renderer = new DateCellRenderer();
        TableCellEditor editor = new DateCellEditor();
        col.setPreferredWidth(180);
        col.setCellEditor(editor);
      col.setCellRenderer(renderer);
//      col.setCellEditor(editor);
lnnTable.putClientProperty("terminateEditOnFocusLost", Boolean.TRUE);
dFormat.setTimeZone(TimeZone.getDefault());
dFormat.setLenient(false);
}

Free space of mdf and ldf does not match with database free space

In SSMS i saw file size related properties and found below details for one database.Here values does not match with other properties. Here size of the mdf, ldf and total size matches with other values under each window. But Available free space of mdf and ldf
if added then it does not equal to Available free space shown in shrink database window and free space shown in database properties. This is true for any database. Why is it so? Please can anyone explain the logic behind this?
Under database properties:
Size: 91.31 MB
Space available:13.40 MB
Under database file properites:
mdf size:17 MB
ldf size:75 MB
under shrink database:
currently allocated size:91.31 MB
Available free space:13.40 MB
under shrink file-for data file:
currently allocated size:16.38 MB
Available free space:12.63 MB
under shrink file-for log file:
currently allocated size:74.94 MB
Available free space:55.62 MB

Hi,
Database properties and database shrink show the total (log+data) values. Others show the individual sizes, log and data separately.
I hope it helps.
Janos
There are 10 type of people. Those who understand binary and those who do not.
My Blog |
Hire Me
This does not answer my question. If you add allocated space of mdf and ldf it equals to database allocated size.But i am asking why this ldf and mdf free space together(when added 55.62+12.63 ) does not equal to database free space?

I need to reinstall my adobe creative suite 6 on a new MAC, which does not take CDs. How do I do tho

I need to install my adobe creative suite on a new MAC, which does not take CDs.
Any clues

Is your CS6 serial number for Windows or Mac? If Windows then you must apply for a platform swap to get a Mac serial number for CS6.
If you already have a CS6 Mac serial number then download CS6 from
http://helpx.adobe.com/x-productkb/policy-pricing/cs6-product-downloads.html

Solaris: The System does not have the required swap space

I'm trying to install Oracle onto Solaris 9. The installation check fails with the error
The System does not have the required swap space.
I've read the install Guide I get the following when I do the memory checks
bash-2.05# /usr/sbin/prtconf | grep "Memory size"
Memory size: 1024 Megabytes
bash-2.05# /usr/sbin/swap -s
total: 767688k bytes allocated + 117080k reserved = 884768k used, 379040k available
The install guide doesn't say how to increase the Swap Space. I would like to increase the Swap Space just for the duration of the installation. From the install guide I'll need a Swap Space of 1.5 times the Ram on the machine so I'll need 1.5GB Swap Space. Can someone help me out with the required syntax to increase the Swap File Size?

Found something on the web that did the trick. Create a few files and then add to your swap.. In case it's of interest to anyone else here's what I had to do
swap -l (lists files in swap)
mkdir /tmp/swap/ (create dir for file to add to swap)
mkfile tmp/swap/swap11 (create file for swap)
swap -a tmp/swap/swap11 (add file to swap)
swap -l (check files in swap)

Why the itunes does not take my ipod 4g

why the itunes does not take my ipod 4g

this worked for me, below.
from:
http://docs.info.apple.com/article.html?artnum=93716
Reinstall the COM interface for the iPod Service
1. Quit iTunes and any running iPod Updater.
2. Click iPodService.exe in the Windows Task Manager window.
3. Click End Process.
4. Click Yes.
5. On the Start menu, click Run. Note that the Run windows may appear behind the Windows Task Manager window.
6. Enter this text (including the quotation marks):
"C:\Program Files\iPod\bin\iPodService.exe" /service
7. Click OK in that window.
8. On the Start menu, click Turn Off Computer.
9. Click Restart.
If the iPod is not working with iTunes or the iPod Updater, proceed to the "Quick Fix" section below.

Build thumbnail image does not take AnalogBalance into account

When I build a thumbnail, it does not take AnalogBalance into account.
dng_image_preview thumbnail;
dng_render render (host, *negative);
// Build stage 2 image.
negative->BuildStage2Image (host, ttShort);
// Build stage 3 image.
negative->BuildStage3Image (host, ttShort);
render.SetFinalSpace (negative->IsMonochrome () ? dng_space_GrayGamma22::Get () : dng_space_sRGB ::Get ());
render.SetFinalPixelType (ttByte);
render.SetMaximumSize (256);
thumbnail.fImage.Reset (render.Render ());
thumbnail.fImage.Get()->Rotate( dng_orientation::Mirror90CCW() );
thumbnail.fInfo.fColorSpace = thumbnail.fImage->Planes () == 1 ? previewColorSpace_GrayGamma22 : previewColorSpace_sRGB;

The AnalogBalance is going to affect the mapping between temp/tint values and camera neutral values. If the white balance values are already stored as camera neutral values, I would not expect it to significantly change thumbnail rendering.
It sounds like you do not understand AnalogBalance correctly.

When I connect my iPad with usb to my mac the iPad gives me a "blinking" message asking to trust the computer. Problem is it does not give me enough time to select yes. What am I doing wrong? Help!

When I connect my iPad with usb to my mac the iPad gives me a "blinking" message asking to trust the computer. Problem is it does not give me enough time to select yes. What am I doing wrong? Help!

Everything that you sync to the iPad is done through iTunes or from downloading from the cloud if they are iTunes purchases or through iTunes Match, if subscribed.
It is also not possible to transfer music or certain other files though Bluetooth between other iPhones or Android devices. You can transfer between iOS devices, pictures through devices that are Airdrop capable.

Whenever I play anything on Windows Media Player Classic, the middle mouse button does not work as a vertical scroll in firefox, but instead shows a horizontal scroll that does not scroll the web pages. How can I fix this problem?

Hi
I have a windows 7 and whenever I play anything on Windows Media Player Classic, the middle mouse button does not work as a vertical scroll in firefox, but instead shows a horizontal scroll that does not scroll the web pages. How can I fix this problem?
I hope that was clear.
Thnx

Hello kmanthie,
I just sent you a private message. If you are not sure how to check your forum messages, this post has instructions.
I worked on behalf of HP.

I did a recent update and now when I try to use FaceTime it does not take my apple id. What can I do?

I did a recent update and now when I try to use FaceTime it does not take my apple id. What can I do?

Using FaceTime http://support.apple.com/kb/ht4319
Troubleshooting FaceTime http://support.apple.com/kb/TS3367
The Complete Guide to FaceTime + iMessage: Setup, Use, and Troubleshooting
http://tinyurl.com/a7odey8
Troubleshooting FaceTime and iMessage activation
http://support.apple.com/kb/TS4268
Using FaceTime and iMessage behind a firewall
http://support.apple.com/kb/HT4245
iOS: About Messages
http://support.apple.com/kb/HT3529
Set up iMessage
http://www.apple.com/ca/ios/messages/
How to Set Up & Use iMessage on iPhone, iPad, & iPod touch with iOS
http://osxdaily.com/2011/10/18/set-up-imessage-on-iphone-ipad-ipod-touch-with-io s-5/
Troubleshooting Messages
http://support.apple.com/kb/TS2755
Troubleshooting iMessage Issues: Some Useful Tips You Should Try
http://www.igeeksblog.com/troubleshooting-imessage-issues/
Setting Up Multiple iOS Devices for iMessage and Facetime
http://macmost.com/setting-up-multiple-ios-devices-for-messages-and-facetime.htm l
FaceTime and iMessage not accepting Apple ID password
http://www.ilounge.com/index.php/articles/comments/facetime-and-imessage-not-acc epting-apple-id-password/
Unable to use FaceTime and iMessage with my apple ID
https://discussions.apple.com/thread/4649373?tstart=90
How to Block Someone on FaceTime
http://www.ehow.com/how_10033185_block-someone-facetime.html
My Facetime Doesn't Ring
https://discussions.apple.com/message/19087457
For non-Apple devices, check out the TextFree app https://itunes.apple.com/us/app/text-free-textfree-sms-real/id399355755?mt=8
How to Send SMS from iPad
http://www.iskysoft.com/apple-ipad/send-sms-from-ipad.html
 Cheers, Tom

Australis does not take up enough vertical space.

Similar Messages

Maybe you are looking for