Auth. Relevant InfoObject not showing in OBI security

Hi experts,
I have a cube with two costcenter infoObject, both are Auth. relevant. But only one shows in OBI in Security. Could any one tell me How to solve this problem.
Thanks

After discussing this issue with local Cisco folks, TAC and colleagues, it seems that locally authenticated user names are not passed to the controller (or NCS). It's not a bug, it's just the way it is.
If you want the AP to authenticate and locally switch users while communication to the controller is down (i.e. loss of WAN link), no usernames are sent to the controller for logging or troubleshooting... even when AP to WLC communication is working fine. It's a trade-off of information (usernames) for uptime.
If any Cisco wireless development folks are browsing, consider this a 'feature' I would like to see. Thanks.

Similar Messages

Wanted: Dictionary-/ Metadatatable for the Mapping of the (old,3.5.) Authorization Object to the (Auth.relevant) InfoObject

Hi,
I am looking for the concrete BW's dictionary-/ metadatatable(s)
which contain/describe the
Mapping of the (old,3.5.) Authorization Object to the (Auth.relevant) InfoObject
of the transaction "RSSM-Authorization for Reporting"
For example:
I got 3.5 Auth.Object ZCOMP_CODE and want to know to which (Auth.relevant) InfoObject
this is mapped, basically what's in the usage of this Authorization Object.
ThanXs
Martin

Hi,
As of now, your authorizations still in 3.x. so please check the below tables.
RSSBAUTHGEN - it holds info provider and authorization object
RSSBAUTHGENERATD - it have user name and info provider
RSSBAUTHTRACE
RSSBAUTHTRUSER
RSSBAUTVAL
RSSAUTHHIER
RSSAUTHHIERNODE
Coming to 7.x , Above mentioned T code kumar is enough to handle authorization concepts.
There is best document about 3.x and 7.x comparison on Google.
please search for it by using search term "An Expert Guide to new SAP BW Security Features"
Written by Marc Bernard
Thanks

'To turn on IR reception' option not showing up in security

My remote for my iMac is not working. I originally thought it neeeded a new battery but that was not it. I had a power outage the other night and since then have been noticing the problem.
The apple support says;
'To turn on IR reception:
Open System Preferences and click Security.
Deselect "Disable remote control infrared receiver.'
When I go to system preferences and then security, the option to 'disble remote control infrared receiver' does not show up.
Yesterday I restarted and the option came back, this morning after turning my computer on it wasn't there again. Any idea how to resolve this problem for good?
Thank you
Dan

again i'm pretty desperate here does anyone have any clue how to fix this or atleast what is causing it?

External Volumes not Showing up after Security Update

Here are the basics: i have a first generation PPC mac Mini (10.4.11) that has a Ministack external harddrive/hub attached to it. I installed the latest Security Update via Software Update with the drive attached (bad idea, i know) and now the drive won't mount on the desktop, does not show up in System Profiler, and doesn't even show up in Disk Utility. It DOES show up when I do a Volume listing in Terminal, so it appears to me that at some level the computer still recognizes that it's there. Also, I attached another external drive that I have and I get the same results with that.
The additional ports on the hub portion of the drive continue to operate without any problem.
So far I've tried repairing permissions, resetting the PMU and PRAM, even archiving and reinstalling the OS to no avail.
Any ideas?

Hmmm, I've heard about the worry of disconnecting externals during an update, but my Mini/PPC was updated to 10.4.11 with a Ministack v1 connected without trouble!?
Seems you've tried about everything... how about Pulling the RAM, trying to Boot, then reinstalling the RAM?
How about booting off the Install Disk, does it show in DU then?
How about Does it boot into Open Firmware with CMDOption+of ?
http://docs.info.apple.com/article.html?artnum=42642

Effictive Permissions not showing up for security groups after interforest migrations using ADMT

Hi there,
I"m trying to fix an issue with the effective permission, below is the description
Two separate forests exist with respective domains DomainA and DomainB.
A two-way trust has been established between these two domains.
I migrate a user (using ADMT) from DomainA to DomainB.
After migration the user account in DomainB has access to the same shares and folders on file servers in DomainA as it did with the user's account in DomainA.
when i checked the effective permission of the migrated security group it does not show up any tick mark on the permissions. but still end users are able to access the resource on file server
Thanks in advance for any advice you may have to offer.
-Vijay

Hi,
After the user migration, did you finish the Security Translation?
http://social.technet.microsoft.com/wiki/contents/articles/16621.interforest-migration-with-admt-3-2-part-3.aspx#Group_Account_Migration
Regards.
Vivian Wang

Data in infoobject not showing in report

Hi,
I have this situation. I can see cost center number in variable screen but the number is not showing when I run the report.
thanks

Hi,
I would suggest you try to see if the data is being populated in the cube for the particualr infoobject.If it is not populated in the cube itself,then check the filters inthe start routine,transfer & Update Routines. If its populating the data then,try to run the query on the same selection criteria and verfiy.This way you can confirm if its the loading into the dataprovider or on the front end that needs to be fixed.
hope it helps

Have Effective Permissions but not showing in Advanced Security in AD UC

I'm trying to find out where a user account is getting permissions to our Active Directory Users & Computers. On the entire domain it has the ability to modify all properties, modify permissions, change owner, and a bunch of stuff that it
shouldn't. I found this out when testing and verified it with using "effective permissions". The weird thing is, when looking at Advanced security, neither the user nor the security group it is in are explicitly given permissions anywhere
in ADUC. My question is: where could it be getting these rights? How do I find it if it's not in the Advanced Security Settings area of ADUC?
I know the problem is the security group and not the user account. After I removed the user account from its security group, it no longer had the extra permissions it shouldn't have.
TestUserA is a member of SecurityGroupA: TestUserA has rights to all of our AD domain (unexpected, not sure where the rights are coming from)
TestUserA removed from SecurityGroupA: TestUserA only has basic "read" rights to our AD domain (the desired level of permissions)
Any help or suggestions of where to find SecurityGroupA's permissions are coming from would be helpful. Thank you!

Any ideas? I would really like to know the answer to this question because there is no way for me to audit these permissions or know which other groups may be getting more permissions than expected.
I know for sure the user is getting permissions from SecurityGroupA. I can clearly see using Effective Permissions that TestUserA gets added permissions in AD when I add them to this group, and the permissions get removed when no longer a member of
this group. It's odd to me that this group isn't explicitly listed anywhere
in AD Security, and it isn't a member of any other groups. Where in the world are the permissions coming from? Viewing the Advanced Security through the mmc and running DCACLS are both useless. The permissions are completely invisible
to us unless we run Effective Permissions specifically against the user.
We are likely going to explicitly deny the group permissions since we cannot figure out how or why this group is getting permissions to AD. This is just a quick-fix, as there still might be other security holes in our environment.

Google and all of its related services are not showing as a secure and pictures are being blocked.

I was forced to add manual exception to even use Google search AND Google email but pictures are still being blocked in Google search. The first 12 pictures will show but the rest only reflect a broken square in the top left corner of where the image preview should be. When I click on the blanks- it shows the picture but I can't work efficiently that way. How do I remove the block on images until the issue can be corrected in another update?
Google Chrome was doing the same thing (blocking images from trusted MAJOR sites like Facebook and Twitter but considering its own material secure). Chrome did not allow a user to control if the images could show and I switched to Firefox as a result. Please fix this. Thanks!

All I had to do was update my clock time and it fixed the issue. My clock was showing December 6, 2014 as the date. Sorry. You can consider this resolved, Thank you!

FlexConnect Local Auth. Usernames not showing in WLC/NCS

Hi,
I am working on a new install where the customer is using local RADIUS servers at each of their many campuses
(for local dynamic VLAN assignment), while using a single set of controllers at the core of their network.
For the record, we have set up a pair of 5508s (v 7.2.103.0) in their central data center with 3602i APs around the various campuses. We are using FlexConnect groups to locally authenticate and switch the users.
Right now, the config is working great as far as authentication and local switching goes. The problem we are experiencing is that none of the authenticated usernames are being passed back to the controller (and ultimately NCS). This makes the tracking and troubleshooting of users difficult. Is there something I am missing here? I can't seem to find any fixes relevant to this issue in the 7.2.110.0 release notes.
Maybe I am going about this wrong. I am very open to alternative solutions.
Thanks.

After discussing this issue with local Cisco folks, TAC and colleagues, it seems that locally authenticated user names are not passed to the controller (or NCS). It's not a bug, it's just the way it is.
If you want the AP to authenticate and locally switch users while communication to the controller is down (i.e. loss of WAN link), no usernames are sent to the controller for logging or troubleshooting... even when AP to WLC communication is working fine. It's a trade-off of information (usernames) for uptime.
If any Cisco wireless development folks are browsing, consider this a 'feature' I would like to see. Thanks.

Implement Hierarchy's On InfoObject that is Not Auth Relevant.

Hello Friends,
Please Advice me in this issue.
I am Upgrading from 3.1 to 7.0.I am able to implement hierarchies when the Infoobject is auth relevant.
There are hierarchies in 3.1 on Infoobjects which are Not Auth Relevant.
Like 0PLANT ..I don't know how to implement using this.
Is there any way to implement hierarchies on InfoObjects which are not auth relevant in BI 7.0 using Analysis authorizations.
Or Do i need to make thes non auth relevant InfoObjects of 3.1 to auth relevant in 7.0 and implement hierarchies.
Please advice.
Thanks,
Ram

Hi Keerti,
Can you please tell me how to implement hierarchy with out making 0PLANT auth relevant.
We are upgrading from 3.1 to 7.0.
0PLANT is not auth relevant in 3.1 but it has Hierarchies.
So business team wants to have the same in 7.0 with out making it auth relevant.
Please help me in doing this.
Thanks
Ram

My Safari preferences menu does not show "security"

My Safari preferences menu does not show the option Security (only lettering types) wahat do I have to do?

Click the little "pill" icon (upper right of the window) to expand all the tabs.

5s finger print scaner not show on settings.

i brought iphone 5s 3 month ago and finger print scanner was working perfect but suddenly my phone,s finger print scanner stopped working and i restored my
iphone 5s now finger print not show on security options,still i have apple Repairs & Service Coverage: April 8, 2015 please guide me what i want to do ??????
thanks
regards ujitha (iphone 5s owner)

is it possible that finger print scan not show in settings (security) i'm confused can you guess is this hardware or software problem..,i restored phone using iPhone6,2_7.1.2_11D257_Restore ,but it didn't work but before i restore it finger print scan setting show on settings but i couldn't scan my finger it says that operation fail try again latter but after restore i didn't get that error massage also now i feel that i;m using iphone 5 which has 5s look,here i'll attach some pictures.,,

My itunes in pc fails to secure link with itunes store it shows the process bar it automatically quits the process it also does not shows any on the screen. i am using windows xp service pack 3. what shoul i do?

my itunes in pc fails to secure link with itunes store it shows the process bar it automatically quits the process it also does not shows any on the screen. i am using windows xp service pack 3. what shoul i do?
Diagnostics test
Microsoft Windows XP Professional Service Pack 3 (Build 2600)
ECS G31T-M7
iTunes 10.5.2.11
QuickTime 7.6.9
FairPlay 1.13.37
Apple Application Support 2.1.6
iPod Updater Library 10.0d2
CD Driver 2.2.0.1
CD Driver DLL 2.1.1.1
Apple Mobile Device 4.0.0.97
Apple Mobile Device Driver 1.57.0.0
Bonjour 3.0.0.10 (333.10)
Gracenote SDK 1.9.5.502
Gracenote MusicID 1.9.5.115
Gracenote Submit 1.9.5.143
Gracenote DSP 1.9.5.45
iTunes Serial Number 0012ABAC07F3CCB0
Current user is an administrator.
The current local date and time is 2011-12-31 14:06:21.
iTunes is not running in safe mode.
WebKit accelerated compositing is enabled.
HDCP is not supported.
Core Media is not supported. (16005)
Video Display Information
Intel(R) G33/G31 Express Chipset Family
**** External Plug-ins Information ****
No external plug-ins installed.
**** Network Connectivity Tests ****
Network Adapter Information
Adapter Name:        {7599FAD1-1BB9-4AC6-80AF-404253DC519E}
Description:            Atheros L2 Fast Ethernet 10/100 Base-T Controller - Packet Scheduler Miniport
IP Address:             192.168.1.5
Subnet Mask:          255.255.255.0
Default Gateway:    192.168.1.1
DHCP Enabled:      Yes
DHCP Server:         192.168.1.1
Lease Obtained:     Sat Dec 31 13:46:09 2011
Lease Expires:       Tue Jan 03 13:46:09 2012
DNS Servers:         192.168.1.1
Active Connection: LAN Connection
Connected:             Yes
Online:                    Yes
Using Modem:        No
Using LAN:             Yes
Using Proxy:           No
SSL 3.0 Support:     Enabled
TLS 1.0 Support:     Enabled
Firewall Information
Windows Firewall is on.
iTunes is enabled in Windows Firewall.
Connection attempt to Apple web site was successful.
Connection attempt to browsing iTunes Store was successful.
Connection attempt to purchasing from iTunes Store was successful.
Connection attempt to iPhone activation server was unsuccessful.
The network connection timed out.
Connection attempt to firmware update server was unsuccessful.
The network connection timed out.
Connection attempt to Gracenote server was successful.
Last successful iTunes Store access was 2011-12-31 14:00:02.
**** Device Connectivity Tests ****
iPodService 10.5.2.11 is currently running.
iTunesHelper 10.5.2.11 is currently running.
Apple Mobile Device service 3.3.0.0 is currently running.
Universal Serial Bus Controllers:
Intel(R) 82801G (ICH7 Family) USB Universal Host Controller - 27C8. Device is working properly.
Intel(R) 82801G (ICH7 Family) USB Universal Host Controller - 27C9. Device is working properly.
Intel(R) 82801G (ICH7 Family) USB Universal Host Controller - 27CA. Device is working properly.
Intel(R) 82801G (ICH7 Family) USB Universal Host Controller - 27CB. Device is working properly.
Intel(R) 82801G (ICH7 Family) USB2 Enhanced Host Controller - 27CC. Device is working properly.
No FireWire (IEEE 1394) Host Controller found.
Connected Device Information:
rawkiss’s iPhone, iPhone 3G running firmware version 4.0
Serial Number:       86931UEAY7H
**** Device Sync Tests ****
Sync tests completed successfully.

I have found a fix after doing additional research through this forum. Tech Note #328730 addresses this problem and it works for Photoshop Album 3.2 even though it was written for release 1.0.
Here is a link that will take you directly to the Tech Note:
http://kb.adobe.com/selfservice/viewContent.do?externalId=328730
When using this fix the Tech Note indicates:
"Imported image data and tags are lost when you re-create the My Catalog.psa file, so you need to reimport images and reapply any tags"
however it did retain the captions (at least it did for me).

Window server 2008 r2 error show "stop :- c00002e3 security account manager initialization failed because of the for A DIVICE ATTACHED to the system is not funcation"

Hi All
Please help
my server not working showing display error window server 2008 r2 error show "stop :- c00002e3 security account manager initialization failed because of the for A DIVICE ATTACHED to the system is not funcation"
Please help me how to resolve this issue ???
thnaks !!!

Hi,
If there is any external device plug into your computer, please unplug it and restart the Server.
You can also test the issue in Safe mode.
If it can boot into Safe mode, please update any driver has yellow warning on it, also check if the dump file is existing under %SystemRoot%\, if so, please help to post back for our research.
Kate Li
TechNet Community Support

After security update my hard drive will not show

G4 Tower - Mac OS X - 733mhz.. After a security update 2 days ago i can not get my computer to boot. It comes up to the gray apple screen and just sits there. I put the install dvd in and went to disk utilities, but the hard drive does not show up at all. I tried to boot the computer in target mode from my laptop. It goes into target mode, but the drive never shows up on the screen. I put disk warrior in the laptop and launched it, and it seen the drive as a firewire drive, but the only option was to rebuild. I have a lot of info on the drive, and am hoping that I do not have to go to that extreme. Please help...

the only option was to rebuild. I have a lot of info on the drive, and am hoping that I do not have to go to that extreme. Please help...
I think you are misunderstanding what disk Warrior will do, and how it does its magic. Disk Warrior is a wonderful, powerful, tool and works well for many people. When it suggests a ReBuild, it is saying your drive is recognized and intact enough to attempt to construct a new (proposed) Directory.
It will scavenge all the information it can find from every possible source (including the existing Directory) and build a new (proposed) Directory of all your recoverable files. If the damage is not severe, nearly all your files will be included in the new (proposed) Directory.
It then lists the differences between the new (proposed) Directory files compared to the old (existing) Directory files, and invites you to look at them side-by-side, if you like. ONLY if you approve, will it replace your old damaged Directory with the new (proposed) one. If you choose not to replace your old Directory, it just quits and nothing is changed on your Drive.

Auth. Relevant InfoObject not showing in OBI security

Similar Messages

Maybe you are looking for